Why dont run developer-viewer.ipa?

hi friend
ı created a folio and then I went to dps panel for other To prepare app. I did all the steps in the DPS panel.I downloaded the file, then the developer-viewer.ipa.After downloading the file ı wanted to run in ipad.I could see only the home page but when I run in iPad.
did not have any page other than the home page within the application.
There were only home page.When I run the application ipad'te reason why you can not see all of the project.
Also I have done the project in a zip up and down the 65 MB. but developer-viewer.ipa file 6 MB.
"Developer-viewer.ipa why when I run the file content is empty" Anybody can help me about the problem?
Thank you in advance for your help

hi thanks for answer,
I used the Multi-Issue App. ı have published folio ID is the same as used in dsp builder ID.I have checked title id and I can not find the problem about title ID.
ı can get developer-viewer.ipa but I can see only the home page but when I run in iPad.What can be a problem other than title ID?

Similar Messages

The Push notification on developer-viewer.ipa

Do I confirm that the Push Notification works on developer-viewer.ipa?
I clicked Notify Button successfully on Folio Producer (Organizer) but nothing happend on iPad (developer-viewer.ipa).
I cofirmed the below link, but I'm not sure it works on n developer-viewer.ipa.
http://www.adobe.com/devnet/digitalpublishingsuite/articles/dps-push-notification.html
shimoawazu

Yes, I've tried already and work it.
Publish a new folio and try notify
//Felipe

Why my serial number of flash cc 2014 dont run?

i have a serial number of flash cc 2014, but dont run!

Creative cloud do not need a serial number. it will be using your Adobe ID on which you have purchased the creative cloud membership.
So you need to login with your Adobe ID and password to activate the cloud membership.
Log out & log back in of the CC Desktop App.
If there is no billing issue then follow these steps.
In case it is not signing in successfully please try the following:
I don't know which operating system you are working on so i am giving you some steps windows and MAC OS:
   Windows:
   In windows 7 navigate to following location:
     /windows/system32/drivers/etc
   1. look out for "Hosts" file
   2. Open it with notepad
   3. Check if you have any entry for Adobe
   4. Remove the entries and try again launching any product from CC
Mac:
   1. Please click on "Go" and navigate to /private/etc
   2. Open "hosts" file and check out for any entries for Adobe.com
   3. Remove the entries and save the file
   4. try again launching any product from CC
You can refer :
http://helpx.adobe.com/creative-cloud/kb/ccm-prompt-serial-number.html
http://helpx.adobe.com/x-productkb/policy-pricing/activation-network-i ssues.html.
Hope it works for you.
Regards,
Rajshree

Why can't i view on iCloud what is on my lost iPhones? i can see how much GB's they are taking up but can't click on the data to see what it is..

Why can't I view my icloud backups on a new apple device using the same icloud id? Unluckily I lost 4 iphones in 2 yrs. all had same icloud acct on them, so when i log on to locate my current iphone on my macbook or on new iphone, it shows a list of all the lost iphones and their data take up.
When i click on settings on my ios> go to icloud > storage & backup> manage storage:
LOST IPHONE 1- 4.5 GB DOCUMENTS & DATA : it shows PREVIEW 1.2 MB PAGES1.6 MB TEXT EDIT91.6 KB PHOTOS 3.2 GB
LOST IPHONE 2- 3.2 GB DOCUMENTS & DATA: it shows same thing just different gb's mb's kb's
LOST IPHONE 3- etc.......
but you can't click on those documents & data to show what exactly they are so you can move them or save and delete. If I go into icloud there's nothing there from that long ago. is that data deleted? if i were to get that certain iphone back and turn it on would the pics, docs still be in icloud? it says all that room in my icloud is still taken up so where can i view it?? anyone know??
THANK YOU!

If you haven't already, you could force-quit Quicktime by using the menu option from the desktop (finder) and choose Quicktime.
Not sure what you have frozen on the screen, be it a failed movie, or some unusual screen shot. If you can find by date (created) you may be able to look for .mov or quicktime suffix name or other video file content to delete it.
And you may have to restart your computer and perhaps run repair disk permissions from Disk Utility's first aid on the hard disk drive in your computer.
Not sure if all that would help now, but it is something a few days late...!
Good luck & happy computing!

Lightroom 5 is distorting my images in Develop view

When working on images in Develop, Lightroom 5 is distorting them. For example, let's say I'm looking at an image in Library view (fig.1), then switch to Develop view (fig.2) — the image is suddenly compressed horizontally (or stretched vertically, however you choose to describe it).
At other times, images get distorted and rotated (fig.3). And at other times, images were appearing as though a sharpen filter had been applied with accented highlights — but this particular distortion doesn't seem to be happening anymore.
This does not happen to all images in the catalog. I'm running LR 5.2 on a 15" MBP with 16GB ram and a 1.2TB fusion drive.
Any help is greatly appreciated. I'm late on a deadline beause of this, and other local (NYC) experts, as well as Adobe phone support, are as stumpted as I am.
fig.1
fig.2
fig.3

Did you find an answer? I'm having the same issue with LR 4.4. It didn't happen with 4.3
The only thing I've found to fix it is re-reading the MetaData file for each affected photo and it is taking forever.

Detail seen different in Develop view and Loupe view

I recently took some aurora pictures, and was adjusting them to put in a slideshow, and noticed something peculiar, i.e., that the details seen in the Develop module are less than those seen in the Loupe view in the Library. This is true in several pictures. The Develop view (2nd picture) is smoother and shows fewer of the fainter stars than the Loupe view (first picture). I hope it shows in the pictures below, which I created by using the Snipping Tool in Windows.
Why is this the case?
The problem is that the Slideshow results in LR seem to be closer to the Loupe view than the Develop view.
The Exif information is as follows:
and the adjustments I made were:
and
I'm using the LR 2014 v 8.7.1, Camera Raw 8.7.1.
TIA.

Hi Michael:
You're right. When I magnified the view to 100%, the results in the two modules were identical, as you said.
It does, however, raise a practical difficulty for me. With these kinds of long exposure, high ISO pictures, if I zoom in to 1:1, I find it extremely difficult to make any adjustments because the noise is so high. I would basically set all the noise sliders to max, and the details to minimum. However, this results in overadjusting for noise and losing too much detail when the picture is viewed zoomed out to fit on a computer monitor as a slideshow. Usually, this is not a problem, but at the high ISO/long exposures of these pictures, I find it very difficult to work in the develop module at 1:1.

HT4972 why dont I have an update facility on my ipad

Why dont I have an update facility on my ipad

If you have an iPad 1, the max iOS is 5.1.1. For newer iPads, the current iOS is 7.1. The Settings>General>Software Update only appears if you have iOS 5.0 or higher currently installed.
You can no longer update to iOS 6.x, or down grade the iOS.
iOS 5: Updating your device to iOS 5 or Later
http://support.apple.com/kb/HT4972
How to install iOS 6
http://www.macworld.com/article/2010061/hands-on-with-ios-6-installation.html
iOS: How to update your iPhone, iPad, or iPod touch
http://support.apple.com/kb/HT4623
If you are currently running an iOS lower than 5.0, connect the iPad to the computer, open iTunes. Then select the iPad under the Devices heading on the left, click on the Summary tab and then click on Check for Update.
Tip - If connected to your computer, you may need to disable your firewall and antivirus software temporarily. Then download and install the iOS update. Be sure and backup your iPad before the iOS update. After you update an iPad (except iPad 1) to iOS 7.x, the next update can be installed via wifi (i.e., not connected to your computer).
Tip 2 - If you're updating via wifi, place your iPad close to your router to preclude getting a corrupted download.
How to Upgrade to iOS 7
The iOS 7.0 update requires around 2.5 GB of storage space, so if your iPad is almost full, you may need to clear up some space. You can check your available space in Settings -> General -> Usage.
There are two ways to upgrade to iOS 7: You can use your Wi-Fi connection, or you can connect your iPad to your PC and update through iTunes. We'll go over each method.
To upgrade using Wi-Fi:
Note: If your iPad's battery is under 50%, you will want to plug it into your charger while performing the update.
Go into the iPad's Settings.
Locate and tap "General" from the menu on the left.
The second option from the top is "Software Update". Tap this to move into the update settings.
Tap "Download and Install". This will start the upgrade, which will take several minutes and will reboot your iPad during the process. If the Download and Install button is grayed out, trying clearing up some space. The space required by the update is mostly temporary, so you should gain most of it back after iOS 7 is installed.
Once the update is installed, you may have to run through the initial steps of setting up your iPad again. This is to account for new features and settings.
To upgrade using iTunes:
First, connect your iPad to your PC or Mac using the cable provided when you purchased your device. This will allow iTunes to communicate with your iPad.
You will also need the latest version of iTunes. Don't worry, you will be prompted to download the latest version when you launch iTunes. Once it installs, you may be asked to setup iCloud by logging into your iTunes account. If you have a Mac, you may be prompted on whether or not you want to enable the Find my Mac feature.
Now you are ready to begin the process:
If you upgraded iTunes earlier, go ahead and launch it. (For many, it will launch automatically when you plug in your iPad.)
Once iTunes is launched, it should automatically detect that a new version of the operating system exists and prompt you to upgrade to it. Choose Cancel. Before updating, you will want to manually sync your iPad to make sure everything is up to date.
After canceling the dialog box, iTunes should automatically sync with your iPad.
If iTunes doesn't automatically sync, you can manually do it by selecting your iPad within iTunes, clicking on the File menu and choosing Sync iPad from the list.
After your iPad has been synced to iTunes, select your iPad within iTunes. You can find it on the left side menu under Devices.
From the iPad screen, click on the Update button.
After verifying that you want to update your iPad, the process will begin. It takes a few minutes to update the operating system during which time your iPad may reboot a few times.
After updating, you may be asked a few questions when your device finally boots back up. This is to account for new settings and features.
 Cheers, Tom

How to start service to run Discoverer Viewer on 10.2 EE on web-port 7778?

I have installed 10.2 EntEdition db on Windows, with OLAP and DataMining options "on", and wish to know what steps can enable me to run Discoverer Viewer (for example, http://mymachine:7778/discoverer/viewer ). What service must be turned on for there to be a response on this port?
I have already started the DBconsole service (port 1158) , the isqplus service (port 5560 through isqlplusctl) and the tns listener service (through lsnrctl). What service do I start to get a response on port 7778 or 7777?
I hope I don't need AS to run Discoverer Viewer...
Thanks for any help,
Vince

Discoverer Plus/Viewer comes with AS10g or Business Intelligence Standard Edition downloads, not DB10g.
AS 10g includes:
* Oracle HTTP Server
* Oracle Application Server Containers for J2EE (OC4J)
* Oracle Application Server Web Cache
* Oracle Application Server Portal
* Oracle Application Server Wireless
* Oracle Sensor Edge Server
* Oracle Enterprise Manager 10g Application Server Control
* Oracle Database Server 10g (10.1.0.4.2)
* Oracle Internet Directory
* Oracle Application Server Single Sign-On
* Oracle Application Server Directory Integration Provisioning
* Oracle Application Server Delegated Administration Services
* Oracle Application Server Certificate Authority
* Oracle Application Server Forms Services
* Oracle Application Server Reports Services
* Oracle Application Server Personalization
* Oracle Business Intelligence Discoverer
* Oracle Security Developer Tools
* Oracle Application Server Guard
* OracleAS Backup and Recovery Tool
BI 10g SE includes:
* Oracle Business Intelligence Discoverer
* Oracle HTTP Server
* Oracle Application Server Containers for J2EE (OC4J)
* Oracle Enterprise Manager 10g Application Server Control
* Oracle Application Server Web Cache
* Oracle Application Server Reports Services
http://www.oracle.com/technology/software/products/ias/htdocs/101202.html
Regards,
Steve.

Why Can't I view purchased movies on my Tv using iPad mini and lighting to VGA adoptor

Why Can't I view purchased movies on my Tv using iPad mini and lighting to VGA adoptor

There's an issue currently that a lot of us are experiencing in that we all get the error message "iTunes is currently unavailable; please try later"
It's an issue with Apple and we're awaiting an update re this
I've posted a topic in regards to this after having a long conversation with Apple support this morning and will be receiving a call from their tech team tomorrow to run through it further
As it stands iTunes cannot be accessed via ATV's and nor can it be streamed via AirPlay from iTunes to the ATV
However I can access all films/iCloud content via my Mac Mini with no issues!

WHY DONT I USE NOKIA MAPS???

I am puzzled about Nokia Maps, like why I cant and dont use it!? why am I considering buying Route 66 for £59? and even a TomTom Go One GB? handheld unit??? £100
hang on a minute!! I have a perfectly good N95-1?? so why dont I use Nokia Maps?? its paid for it should work!! well it requires a GSM network connection as well as GPS, which caines all your credit in no time thats with the maps downloaded! what was the point of selling a GPS enabled reciever phone with all the fancy Maps program but I cant use it like any other normal APP!!!???
How much does it cost to run? does it deppend on network?
or ammount of data used, why does it try to download the mao when its already downloaded from Nokia?
Its mad, I can get a satelite to lock in,and even try to plan routes , but it constantly crashes out, its useless , its a shame!! I paid all that money and I cant use the GPS at all anyone else feel the same??
N95-1 (8GB-MicroSD),LCG-Audio,Fring,Nimbuzz,Skype,Youtube,iPlayer,Garmin4-GPS.Googlemaps,SkyFire,ZoneTag,Gravity, Sennheiser CX-400-IIs,500-IIs,TR-120 Wireless,HD215'S.AudioTechnica ATX-M50's.BT B-Tube BT Speaker.

UPDATE:
Re-installed the same firmware, managed to install MAPS 2.02
and it all now works until you need it ! i'll explain later.
SIMPLE MISATKES!:
Make sure you have the memeory card inserted before the install of MAPS 2.02!
Make sure your phones Profile is on GENERAL after restoring your backup after upgrading your firmware. Now MAPS 2.02 should load.
after all this I had to reinstal Nokia Internet Radio Youtube, Fring, AND I installed GOOGLE MOBILE MAPS with a 800kb download over GPRS and it's amazing! need to see a thread dedicated to Google Mobile Maps!
MAPS 2.02 First off Im very impressed with the new version of MAPS and all its features until you NEED certain things!
NO MORE ATMS or CASHMACHINES show up, NO MORE WIFI POINTS!!
how do I fix this?? is this the EXTRAS WE HAVE TO PAY FOR?
Now I'm in town and I'm dettermind to actualy get a fix and use this thing in town under stress of busy traffic and a busy crowd test! I got a FIX with the Red Icon showing and I looked up a shop and hit go and up pops another box saying The Licence blah blah whats going on?? it always tries to charge me at the most inconvienient time ever!
I have no idea if I have to subscribe or get billed off my network?
I have NEVER been able to figure out MAPS :/ like how is it charged? how you subscribe to it? would I need web n walk or surf for a £1 all day on O2 would this help? Its useless otherwise i'm totally perplexed with it. ROute 66 is £59 you install it , it works. or £99 TomTOm 1 Solid State, slim portable, big touch screen, so if after all this setting up time and hassle with MAPS 2 how much will it cost me?
N95-1 (8GB-MicroSD),LCG-Audio,Fring,Nimbuzz,Skype,Youtube,iPlayer,Garmin4-GPS.Googlemaps,SkyFire,ZoneTag,Gravity, Sennheiser CX-400-IIs,500-IIs,TR-120 Wireless,HD215'S.AudioTechnica ATX-M50's.BT B-Tube BT Speaker.

Can i run discoverer viewer without nt

can run discoverer viewer with netware and
oracle 8i.
thanks

Hi,
If you are prepared to do some development work it is possible to schedule Discoverer reports through the Concurrent Manager.
See this thread for more details (Re: Running Discoverer reports using PL/SQL?
Rod West

How java runs in command prompt and why java runs on it

how java runs in command prompt and why java runs on it

command prompt was used before the development of IDEs like RAD,eclipse etc.
its still used for better understanding of the compilation and errors.
type the java file and save the file(source file) in the bin folder of ur jdk environment with extension .java. the source file must be the one that has the main method declared.
in the cmd prompt screen , set the path of bin folder.
eg:C:/program files/jdk(some version)/bin/...
for compilation,type:
javac (source file_name).java and press enter
for running the file:
java source file_name

Why dont i ever see downloaded pdfs in the "documents section" in adobe reader on my ipad?

Why dont i ever see downloaded pdfs in the "documents section" in adobe reader on my ipad? They only stay in the Acrobat.com section and when I try to move them the "documents" partion is not listed as an option. Only the folders i have within acrobat.com are listed

The pdfs have been uploaded to Acrobat .com (from my computer) I open the Adobe reader on my ipad and see them in the acrobat partition of the reader. I tap on them and they open. To test whether they were truly downloaded ,I turn off wifi and they still open. I consider this "downloaded" BUT... they stay in the acrobat.com partition of the reader. Nothing ever goes or lives in the "Documents" partition..nor can I move anything there.....Why not? What is the"documents" partition there for if nothing lives or can be moved there?

Why did my calendar view suddenly change? Using iOS 7.1 and I've been using this version for a few weeks with no problem with my calendar. Now the view has changed and I can't view a list mode without seeing the month too

Why did my calendar view suddenly change in iCal? I've been using ios7 fôr a few weeks now with no problems. Suddenly, without any updates or anything, the calendar view changed and I can no longer view it as a list without having the entire month seen as well.

Hey Gattypyle,
Thanks for the question. You simply need to go back to Day/Week view, then tap the list-view icon once more.
Calendar at a glance - iPhone
http://help.apple.com/iphone/7/#/iph3d110f84
View a list of events. In month view, tap to see a day’s events. In day view, Tap the to view a list of events.
Thanks,
Matt M.

How to find out who your administrator is and why I can't view certain things even on this web sight business account is what I have

How do I find out who my administrator is and why I can't view certain things and get error 401 says i am an unauthorized user
It is a small business which doesn't make sense why I shouldn't be able to access certain pages on the Internet
I believe my husband is the administrator actually
Plus 404 and 403

If you are referencing a specific web site, there is no way to determine who is set up as administrator. Contact the web site directly.
Barry
P.S. As a note, you already received an answer to your "401" question. Please do not rephrase a question and post it again. We are volunteers here and do not like to answer something that has already been addressed.
Message was edited by: Barry Hemphill

Why dont run developer-viewer.ipa?

Similar Messages

Maybe you are looking for