Why Flash CHATROOM Test Movie Runnable but cannot run it as ".SWF"??

Here's my Flash runnable as CHATROOM
JAVA server
Flash client
RUNNABLE in Flash Test Movie (Ctrl-Enter)
But it does not respond when I put the ".swf" into the Internet and connect it back to JAVA server host.
No response at all. No connection at all.
What's the problem? What should I do??

Is the swf in the same folder as the web page that loads it?

Similar Messages

  • Flash CS4 "Test Movie" vs Debug/Standalone

    After some rigorous testing on a file that has given me
    multiple issues, I noticed a discrepancy. When I tested in Flash
    CS4 using CTRL-ENTER
    (Win XP SP3 - just FYI, not really issue-relevant I don't
    think), the file previewed just like I expected it to, but
    since it was still in development and not finalized, my code could
    have (read: most likely was) been flawed. However, just to be safe
    I ran it in the Debug Flash Player, and the code did not work. I
    even tried using File>Publish from Flash and played that swf.
    The Standalone Player's results were the same as the Debug
    Player's. The code did not work.
    Is there something I am missing or is this a bug? Why
    wouldn't the Flash CS4 Test Movie Player produce the same results
    as the Standalone Player? Thanks to all who reply.

    I'm in CS4 (see title
    ). I always have strict mode on and I am not loading
    any external data. It's all self-contained. I'm beginning to think
    that it's a memory issue with Event.ENTER_FRAME, but it would make
    more sense to not run properly in the Flash IDE rather than than
    the Standalone Player.

  • Can compile but cannot run.

    Dear Java Guru,
    Wish to find out why I can compile but cannot run. I encounter the following error: 'Exception in thread "main" java.lang.NoClassDefFoundError: javax/media/jai/JAI
    at saveasone.<init>(saveasone.java:29)
    at saveasone.main(saveasone.java:21)'
    This does not happen on one PC but happened on another PC.
    The one can compile is XP, the other which cannot compile is Win2k Professional. Is there any other possible cause ?
    Please advise.

    The problem probably lies in the Classpath. I think you are using different environments for compiling and running. If you are using an IDE for developing your code, you might have set the classpath correctly there but not in the executing environment. As about the OS's you mentioned, I think the problem is still with your Environment Settings than OS settings.

  • JavaService - can install java program into win2k service, but cannot run

    i have a JavaService problem: i can install java program into win2k service, but cannot run
    the version of javaservice is 2.0.7.0
    the following is the message:
    C:\DailyUpdate\dist>JavaService.exe -install DailyUpdate C:\Program Files\Java\j
    dk1.5.0_05\jre\bin\client\jvm.dll -Djava.class.path=C:\DailyUpdate\dist\ftpbean.
    jar;C:\DailyUpdate\dist\mysql-connector-java-3.0.10-stable-bin.jar;C:\DailyUpdat
    e\dist\DailyUpdater.jar -Xms16M -Xmx64M -start DailyUpdateHandler -params C:\Dai
    lyUpdate\dist -out C:\DailyUpdate\dist\logs\out.log -err C:\DailyUpdate\dist\lo
    gs\err.log
    The DailyUpdate automatic service was successfully installed
    The DailyUpdate service is starting.
    The DailyUpdate service could not be started.
    The service did not report an error.
    More help is available by typing NET HELPMSG 3534.

    I might be doing some programming for my company soon
    which will require a program to monitor a database
    and whenever there is a change to certain fields, it
    must copy certain fields into another database. When I see "whenever thiere is a change to certain fields" I tend to think "triggers" - but maybe this won't work for you 'cause of the "another database" part. And the fact that triggers are inherently evil.
    [snip]
    Is it possible to run a Java program as a windows
    service? And if so then how would you go about it? I'd hit Google - there're a couple ways to do this.
    [snip]
    Also,...if I were to use one of those programs which
    can make an .exe of a Java program, then do you still
    require the JRE to be on the machine? It depends on how you did the conversion. If you compile to native then no, if you just wrap up a JRE then yes.
    Why I ask is
    that I occasionally get asked to do small development
    projects for my company, but we are a microsoft
    partner and therefore do all the development in C#
    and the like. So I would like to just implement as
    many things in Java as I can, just to show everyone
    that Java can do exactly what C# can do. But its
    difficult to convince people of this since I always
    require the JRE and they dont. Of course, they require the .NET framework and you don't. And last I looked that thing was around 23 Meg.

  • I can see my project in the movies folder but cannot open it, why?

    I have been working on a project for three hours, the FCP quits unexpectedly and when I restart the prgram the project is gone as if I never started it. I can see the project in the Movies folder but it will not open. What am i doing wrong?

    Can you provide us with a screen grab of the folder so we can see the current structure.

  • Test Movie works, but...

    I am able to Test Movie in Flash, but I am not able to
    Preview HTML; i just the background color of the Scene in the
    browser. Code is attached.

    try to open your .SWF with your browser, check if that works.
    right click the SWF ---> Open With ---> Browser
    your Flash Player might need updating, or has been
    uninstalled.
    the HTML looks right, and all files are in the same
    directory, I cant why else it would not display.

  • Flash CS6 Test Movie blank

    I am using Flash CS6 (12.0.0.481) on a mac, with Flash Player Plug-in version 13.0.0.201 installed.
    If I test movie using ⌘↵, it produces a blank preview - This only occurs in Flash Player 10 upwards, Flash Player 9 works fine
    publish preview ⌘F12 also works, but doesn't show trace commands
    Has anyone experienced this before?
    Thanks

    yes, many people.
    if that's occurring with all fla  files:
    reset your preferences -
    acrobat:  http://help.adobe.com/en_US/acrobat/X/pro/using/WS58a04a822e3e50102bd615109794195ff-7feb.w .html
    adobe media encoder: https://forums.adobe.com/thread/1713540
    after effects:  http://helpx.adobe.com/after-effects/using/preferences.html
    dreamweaver:  https://helpx.adobe.com/dreamweaver/kb/restore-preferences-dreamweaver-cs6-cc.html
    flash:  http://helpx.adobe.com/flash/kb/re-create-preferences-flash-professional.html
    illustrator:  http://helpx.adobe.com/illustrator/using/setting-preferences.html
    indesign:  https://forums.adobe.com/thread/526990
    lightroom: https://helpx.adobe.com/lightroom/help/setting-preferences-lightroom.html
    muse (mac): https://forums.adobe.com/thread/1246022?tstart=0
    photoshop:  https://forums.adobe.com/thread/375776
    photoshop elements:  http://www.photokaboom.com/photography/learn/Photoshop_Elements/troubleshooting/1_delete_p references_file.htm
    premiere pro: http://www.mediacollege.com/adobe/premiere/pro/troubleshooter/trash-preferences.html
    if that fails, uninstall, clean (http://www.adobe.com/support/contact/cscleanertool.html) and reinstall

  • Crossdomain.xml allow Flash CS4 Test Movie sandbox?

    If I set the crossdomain to allow all with a wildcard, running test movie on the FLA within Flash CS4 works.  But is there a way to allow my specific computer instead?  I've tried adding my IP address, but that doesn't seem to be working.

    The SWF is attempting to load external assets using an absolute path 'http://mydomain.com/stuff'.

  • HT3523 I can play an .mov file but cannot open it to move it to another drive/disc/etc. When we try to open it, we get a message that says "The movie file for "beanmine.mov" cannot be found. Without this file, the movie cannot play properly."

    We can play a .mov file (a full-length film created in final cut pro) but cannot actually open it in QuickTime. We get the error message saying that a file is missing, and the movie can't play properly without the file. The thing is, we can play the film, we just can't open it to move it to another drive. Help?
    Also, can the lost file (which was deleted) be recovered from a Mac HD or an external hard drive?
    Help!

    We can play a .mov file (a full-length film created in final cut pro) but cannot actually open it in QuickTime. We get the error message saying that a file is missing, and the movie can't play properly without the file. The thing is, we can play the film, we just can't open it to move it to another drive. Help?
    Sounds like you created a "Reference" file here. I.e., a "Reference" file is a file that tells the player how to play the data contained in a "Resource" file. When you try to open the "Reference" file in the QT Player app, the first thing the player does is check to see if the "Resource" data file is is still available where it is supposed to be. (I.e., moving/deleting the resource file or moving reference file without moving the resource file to maintain the relative path between the two will generate the error message you mentioned.)
    Also, can the lost file (which was deleted) be recovered from a Mac HD or an external hard drive?
    That depends. Deleting a file does not actually erase the data immediately. Instead, the operating system just tells the system directory that the space containing the movie data is available for reuse if/when needed. As time passes, the chance that some of the data sectors will be re-written by other data continuously increases. To restore the file normally requires use of a special utility that both locates and restores all of the linked sectors containing the "deleted" movie data in their correct order. Other methods of restoring files would depend on the software you routinely have active on your system. For instance, do you use "TimeMachine?" or orther software that automatically backs up your data periodically? If so, then follow the instructions for your particular application to recover a deleted file.

  • Ok in appletviewer, but cannot run in a brower, due to JLabel, why?

    hi, there,
    i pop up a window from my applet, using Jframe, and in it is a Jlabel showing some texts.
    now i can run it w/o problem when using appletviewer. but when i test it from a brower, like IE, it cannot run, the error message is like: cannot find javax.swing.JLabel class.
    what is wrong with it? thank you very much for your help.
    richard

    The problem is that the browser is compatible with java 1.1.x, not 1.2 or later with swing. So if you use any of the new classes, the browser doesn't know about them.
    With the latest browser version, you can use java 1.2 or later (by downloading and installing java runtime environment). To make it work in older browsers, you need to modify your html page so it uses jre as a plugin. That means ppl still need to download and install a jre (if not included in the latest browser versions) to run your applet.

  • Non-responsive Screen - can move cursor, but cannot select

    MacBook Pro, OSX 10.10, cannot select or click on anything.
    Mouse or touch screen will move the cursor, but it's like the screen is frozen.
    Message on screen is "carbon coy cloner interrupted logout.  Cancel or Try Again."
    Control right arrow moves to next desktop  (there are five).  Cursor stays in same place on the screen.
    Removed HDMI connection to external monitor, and rebooted, but cannot click on login in names. 
    Can move to different login persons using arrow keys.
    Pressing  Return brings up login password box. typed in password.  Login successful.
    Using control-Left Arrow will slide over a different desktop.  In the first desktop, the there is an open TextEdit document into which I can type successfully.
    But I cannot move the document, or save it.
    What's happening?

    This has happened to me at least a half dozen times since I updated to 10.2.2 yesterday morning. Each time I have restarted using the power button. Basically, the same as you are seeing. The mouse moves but when I try to click to select, nothing happens. I can't even get the dock to pop up.

  • Trying to connect kodak c315 to macbook air downloaded driver but cannot run software why?

    just purchased new macook air and trying to connect to my Kodak C315 printer via WIFI
    I have downloaded driver from Kodak support but when I try  to install get error that cannot run software as it is from an unknown developer
    can anyone help please

    See how to open an app from an unidentified developer in http://support.apple.com/kb/HT5290  and http://support.apple.com/kb/PH14369

  • Browser Works with Flash test movie btns but not in Dreamweaver

    What changes need to be made?
    The Broswer brings up this SE when testing flash btns in DW?
    SecurityError: Error #2028: Local-with-filesystem SWF file file:///C:/inetpub/wwwroot/Pizzapal.co.uk/topFramebtns1.swf cannot access Internet URL http://mark-pc/Pizzapal.co.uk/index.html.
    at global/flash.net::navigateToURL()
    at topFramebtns1_fla::MainTimeline/btn1Click()
    Thank you for reading
    Sabby76

    Give my self a star, the flash player manager needed to be asigned to acept the absolute path to my little virtual website.
    Problem solved, the underlying one is ongoing...
    Sabby76 `

  • Flash CC "Test Movie"

    Hello folks,
    i got a problem and I dont't know how to fix it.
    Everytime I test my Movie "CTRL-ENTER" the window opens up very, very small. It is totally annoying since I have to manually stretch the window everytime. Pls have a look at the screenie.
    I tried to reinstall flash cc, tried to reset the configuration. I guess flash cc does nor save last positions and the size of specific windows.
    thx in advance ...

    SujaiS, Size is in pixel.
    I find a way to "bypass" the problem. The first time I launch the test window, it's always too small, but if I keep it open and re-launch the test, window appear in the correct size. So, I don't close the test window and it work.
    It is annoying and not a great fix in the long term, I hope Adobe will find a way to correct that.
    Note that my timeline is empty. Everything is created with AS3.

  • Flash not testing movie properly

    So, I have been working on this fla for weeks now. Just friday, I tested it and it worked beautifully nothing wrong! Then Flash crashed (CS- my computer does this to me all the time so I wasnt shocked, and my file was saved anyway) and I reopen it and test it again, and I got a small white window that had nothing in it. My fla is driven completely by code, but there are MC's and such on the stage that are always there. So I close out the swf that didnt work, and tested it again, this time it appeared but nothing functioned. I tested this on two other computers with the same result, so I gave up for the day. I come back to it today, same issue, but if I just test the same swf in Flash Player, everything is functional with absolutely no issue....
    I test the same swf in debugger, and it doesn't function, and I get null errors, that in Flash Player don't occur (and didnt when flash was originally testing them- this is all using the exact same swf!)....Any thoughts? has anyone else come across this?
    The other thing to note is that this occurs with older files as well, files that I know for a fact have no issue, and used to preview just fine....

    if all your fla files fail to work as you expect, try reinstalling flash pro.

Maybe you are looking for