Why I cant type correct single quotation mark in SQL Server 2014 (Please see the pic below)

I start to learn SQL Server 2014 by myself just several days ago. As shown above, I tried to input the code in the
guide book for exercise like I do before. However, it seems to have some problems this time. I cant type a closed quotation mark as I did before for successfully execute those codes. I hope somebody who is so kind to help me with this problem.
Thanks a lot!

Can you share your sample code?
Ahsan Kabir Please remember to click Mark as Answer and Vote as Helpful on posts that help you. This can be beneficial to other community members reading the thread. http://www.aktechforum.blogspot.com/

Similar Messages

Checking single quotation mark

Hallo
I have a probelm
I want to check in a if block the value of single quotation mark '
how can I do it in sap
regards

I don't know your exact situation, but for me this works:
PARAMETERS : p_string TYPE string LOWER CASE.
IF p_string CA ''''.
WRITE:/ 'Yes'.
ELSE.
WRITE:/ 'No'.
ENDIF.

"Excel found unreadable content in" The Problem is text in a clob exported to excel uses - Left single quotation mark -Right double quotation mark.

Here are the ASCII char being used.
145 221 91 10010001 ‘  ‘ Left single quotation mark
146 222 92 10010010 ’  ’ Right single quotation mark
147 223 93 10010011 “  “ Left double quotation mark
148 224 94 10010100 ”  ” Right double quotation mark
149 225 95 10010101 •  • Bullet
150 226 96 10010110 –  – En dash --
The default CHAR NOW is a black diamond with ? in middle in stead of 'Right double quoation mark' and others.
The Text used is copied from documents user's get
so someone is putting in I think what is called ALT ascii. This data has been used for years
some updates where put in the system, I don't know details.
The following error started you click YES and the XLS has alot of data missing not just the CLOB.
Excel found unreadable content in ‘file-name’.
Do you want to recover the contents of this workbook?
If you trust the source of this workbook click yes.
I can copy the text then load it into the a column in a xls.
I am exporting the spreadsheet from TOAD it wasn't updated so
it has to be with the EXCEL. I tried changing the ENCODING in EXCEL but that
didn't work.

I'm not familiar with TOAD, could you please let us know how did you export data from TOAD to Excel?
Based on your description, it should be an encoding problem, have you tried to change the encoding as 'UTF-8' ?
Wind Zhang
TechNet Community Support

Ligatures are turned as single quotation mark, HELP ME

I'm using ID CS4 in Mac for composing books, so far in two books the ligatures (fi, fl) are turned as single quotation marks in the output export PDF, am unable to find solution for this, looking forward for the solution. Please help me with your great expertise.

Hi Peter,
Thanks for your quick response, let me check and get back to you.
Very first time when it happened we tried again but it was worked well. So this problem is not regular sometimes it works well and sometimes not.
As you have suggested below let me check and get back to you. Thanks.

Asking for single quotation mark in a query?

Hi,
can somebody told me how I can ask in SQL for a string which includes a single quotation mark??
Something like this: AAAsb '&' BBBfg
I would like to replace the '&' into &. To make this I must know how I can
ask in a query for '&'
thanxx
Schoeib

You can escape the quote character by repeating it like so:
'AAAsb''&''BBBfg'
I hope this helps.

How to insert single quotation marks

Hi folks!
I'm having problem with inserting single quotation marks (').
I know this could be easily solved but I'm not sure what the best solution is.
Example
updatePackingMethod("That's it");
will throw a sql exception:
Syntax error (missing operator) in query expression ''that's it'
my function is written like this
public boolean updatePackingMethod(String packName, int id){
String sql="Update PackMethod set PackMethodName='"+packName+"' where Id ="+ id;
try {
Statement stmt=conn.createStatement();
int result=stmt.executeUpdate(sql);
if(result>0)
return true;
catch (SQLException ex) {
ex.printStackTrace();
error.setError(ex.getMessage);
return false;
Any?
/Filip

public boolean updatePackingMethod(String packName, int id){
String sql=" Update PackMethod set PackMethodName= ? where Id = ? ";
PreparedStatement pstmt = null;
try {
pstmt = conn.prepareStatement( sql );
// pstmt.setXXX( index, paramValue );
// where XXX is datatype of parameter
// index is the Nth ? (question mark) in the sql
// paramValue is the value to be used instead of ?
pstmt.setString( 1, packName );
pstmt.setInt( 2, id );
int result=pstmt.executeUpdate( );
if(result>0)
return true;
catch (SQLException ex) {
ex.printStackTrace();
error.setError(ex.getMessage);
} finally {
if( pstmt != null ) pstmt.close();
return false;

Why i cant type any word on running window?

Fellas,
Why i cant type any word on running window? like this example:
import java.util.Scanner;
public class sunMath {
public static void main(String args[]){
Scanner input = new Scanner(System.in);
int number1;
int number2;
int results;
System.out.println("Type the first number:");
number1 = input.nextInt();
System.out.println("Type the second number:");
number2 = input.nextInt();
results = number1 + number2;
System.out.printf("Result: %d\n", results);
Message was edited by:
eduacsp

Hi,
in JDeveloper 10.1.3
1) double click onto project node
2) select run/debug node
3) Press "Edit" button
4) Select "Tool Settings"
5) Check the "Allow Program Input" checkbox
6) Ok all dialogs until all are closed
Run your application and see the input field below the message output
Frank

I cant read correct single quote from mySQL database...

I cant read correct single quote from mySQL database, pls help. What i'm talking about. I must import, "J'adore" for example in my DB and I'm doing this. Thats ok. But when I try to read this value from my DB through JDBC I'm receiving SQL exception (because JDBC thinks that i didn't close may quote). If somebody knows solution for this problem lets tell me.

I'm not sure I got your question correctly, but maybe
this solves your problem:
Connection conn = // Wherever you get it from
PreparedStatement query =
= conn.prepareStatement("INSERT INTO table_A (field_A) VALUES (?)");
query.setString(1, "J'adore");
query.execute();
query.close()Regards, Eirikthe select variation which i think you mean the WHERE clause would be...
Connection conn = // Wherever you get it from
PreparedStatement query = conn.prepareStatement("SELECT * FROM table_A WHERE field_A = ?");
query.setString(1, "J'adore");
ResultSet rs = query.executeQuery();

I can see the pics but when I click on the event itself a HUGE exclamation mark pops up and not my pic.

OK..this forum help me locate my iPhoto so HOPEFULLY ya'll can help me w/ 1 another issue. When I open an event in iPhoto...I can see the pics but when I click on the event itself a HUGE exclamation mark pops up and not my pic. Its really weird that I can see the pic but cant open it. Hopefully we can correct this issue. Also, if anyone has the energy....pls tell me how I can export from my iphoto-I want to place all my pics on CDs or my external hard drive and when I try to export it says.."unable to export.." I dunno!
Help PLZZZZZ!
Lost again,
Amanda

The two problems are related.
The ! turns up when iPhoto loses the connection between the thumbnail in the iPhoto Window and the file it represents.
And that's why you can't export as well.
Option 1
Back Up and try rebuild the library: hold down the command and option (or alt) keys while launching iPhoto. Use the resulting dialogue to rebuild. Choose to Rebuild iPhoto Library Database from automatic backup.
If that fails:
Option 2
Download iPhoto Library Manager and use its rebuild function. This will create a new library based on data in the albumdata.xml file. Not everything will be brought over - no slideshows, books or calendars, for instance - but it should get all your albums and keywords back.
Because this process creates an entirely new library and leaves your old one untouched, it is non-destructive, and if you're not happy with the results you can simply return to your old one. .
Regards
TD

I Cant find Sql Server 2014 express edition after installing it. How do I start the program

Hello,
I have Installed Sql Server 2014 Express edition and downloaded the AdventureWorks 2014 database and Back up files.
I cannot find an Icon for the Sql Server on my Desktop to start the Sql program. There is only an icon for the Server Installation Center.
How do I start the Sql server. I tried opening the AdventureWorks Database but I cant open it.
Thank you

Thanks Shanky
When I installed Sql I chose Windows Login. After Installing I logged into Sql server using windows account. Should I have chosen an Sql account instead.
Hi,
Its is Ok if you have chosen windows Login. But it should be part of local administrator. I assume you know how to check
Is it not a security risk having to run Sql server as an administrator when using windows account or sql account.
Yes it is but at this point where I guess only you would be using and to get around with problem which you are facing. its recommended to run SQL server service with least privileged domain account. If you wan to read more see
this link
How do I make sure the account with which SQL Server service is running has full permission on folder where adventure works mdf and ldf files are located.
Please make a habit to search on net it is filled with lot of information.
This link would help.
Locate the folder on drive where AD mdf and ldf file reside. Right click on folder select properties and then select security tab. Click on add and then type account name and search and add it
Please mark this reply as answer if it solved your issue or vote as helpful if it helped so that other forum members can benefit from it
My Technet Articles

Errors while Changing the Database to Mutli User Mode from Single user mode in SQL Server 2012

Hi,
Good Afternoon :). Need your help in resolving one of the issue with SQL Server 2012.
Today, we kept one of the database in the Single User mode and wanted to bring back to Multi User mode. But we are getting the below error. There are no user sessions connected to this database which are blocking each other. I see multiple
SYSTEM sessions are in blocked state.  The blocking is not cleared even affter restarting the SQL services.
Verified the SQL Server Errorlog and couldnt get much useful information to troubleshoot the issue.
pasted the information from the sys.sysprocesses as well for your kind reference.
Msg 1205, Level 13, State 68, Line 1
Transaction (Process ID 55) was deadlocked on lock resources with another process and has been chosen as the deadlock victim. Rerun the transaction.
Msg 5069, Level 16, State 1, Line 1
ALTER DATABASE statement failed.
spid
kpid
blocked
waittype
waittime
dbid
login_time
status
cmd
18
1004
36
0x0005
144
5
4/9/2014 13:13
background
TASK MANAGER
35
1796
36
0x0005
35
5
4/9/2014 13:34
background
TASK MANAGER
36
2464
37
0x0005
363
5
4/9/2014 13:34
background
TASK MANAGER
37
5100
36
0x0005
254
5
4/9/2014 13:04
background
TASK MANAGER

Clearly 36 and 37 are causing deadlock.
see
https://www.simple-talk.com/sql/database-administration/handling-deadlocks-in-sql-server/
http://www.mssqltips.com/sqlservertip/1036/finding-and-troubleshooting-sql-server-deadlocks/
Please Mark This As Answer if it helps to solve the issue Visakh ---------------------------- http://visakhm.blogspot.com/ https://www.facebook.com/VmBlogs

SQL Server 2014 Express why not support Windows 8.1 Pro ?

Hi All !
I tried to setup SQL Server 2014 Windows 8.1 Pro x64, but setup says :
"The operating system on this computer or its service pack level does not meet the minimum requirements for SQL Server 2014. To determine the minimum required operating system supported for this SQL Server release, see Hardware and Software
Requirements for installing SQL Server 2014 at:
An error occurred during the SQL Server 2014 Setup operation.
Error result: -2067529676
Result facility code: 1220
Result error code: 52
For more information, review SQL Server 2014 Setup logs in your temp folder."
The log file contains :
07/08/2014 17:08:25.245 Setup launched
07/08/2014 17:08:25.261 Attempting to determine media source
07/08/2014 17:08:25.276 Media source value not specified on command line argument.
07/08/2014 17:08:25.307 Setup is launched from media directly so default the value to the current folder.
07/08/2014 17:08:25.323 Media source: E:\Setup\Microsoft\SQL 2014 Express\SQLEXPRWT_x64_ENU\
07/08/2014 17:08:25.339 Attempt to determine media layout based on file 'E:\Setup\Microsoft\SQL 2014 Express\SQLEXPRWT_x64_ENU\mediainfo.xml'.
07/08/2014 17:08:25.401 Media layout is detected as: Advanced
07/08/2014 17:08:25.417 Not a slip stream media, so continuing to run setup.exe from media.
07/08/2014 17:08:25.448 Error: This OS is not supported
07/08/2014 17:08:27.479 Setup closed with exit code: 0x84C40034
Why not supported this OS, if the SQL Server 2012 Express x64 is, and Windows Phone SDK 8.0 also.
Thanks.

Hey DBT,
SQL Server 2014 Express supports your operating system.
You can see the link below the requirements for each version: http://msdn.microsoft.com/en-us/library/ms143506.aspx
Did you try to restart the computer and then try installing again?
There are users that it helps them, it might solve the problem but preventing them expect an error and understand why it happens.
Sometimes it appears as a result of lack of .NET Framework (check the Microsoft article if you meet the requirements before installation).
If you are interested to View and Read SQL Server Setup Log Files
I've provided you a link that explains simply how to do this.
http://technet.microsoft.com/en-us/library/ms143702(v=sql.110).aspx
Please Mark This As Answer if it helps to solve the issue
Tzuri Ben Ezra | My Certifications:
CompTIA A+ ,Microsoft MCP, MCTS, MCSA, MCITP
|
FaceBook: Tzuri FaceBook | vCard:
Tzuri vCard |
Microsoft ID:
Microsoft Transcript
|

Cluster resource 'Analysis Services' of type 'Generic Service' in clustered role 'SQL Server' failed.

Windows Server 2012 R2
SQL Server 2012
After a recent cluster failover from node 1 to node 2, the Analysis Services role is in a failed state, with the service stopped. When attempting to start the service, there are two error messages captured in Failover Cluster Manager:
Log Name:      System
Source:        Microsoft-Windows-FailoverClustering
Date:          4/10/2014 11:48:49 AM
Event ID:      1042
Task Category: Generic Service Resource
Level:         Error
Keywords:
User:          SYSTEM
Computer:      HQ-HASQL-1.sbgnet.int
Description:
Generic service 'Analysis Services (HASQL)' failed with error '1067'. Please examine the application event log.
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
    <Provider Name="Microsoft-Windows-FailoverClustering" Guid="{BAF908EA-3421-4CA9-9B84-6689B8C6F85F}" />
    <EventID>1042</EventID>
    <Version>0</Version>
    <Level>2</Level>
    <Task>16</Task>
    <Opcode>0</Opcode>
    <Keywords>0x8000000000000000</Keywords>
    <TimeCreated SystemTime="2014-04-10T15:48:49.752168200Z" />
    <EventRecordID>26212</EventRecordID>
    <Correlation />
    <Execution ProcessID="9036" ThreadID="14748" />
    <Channel>System</Channel>
    <Computer>HQ-HASQL-1.sbgnet.int</Computer>
    <Security UserID="S-1-5-18" />
</System>
<EventData>
    <Data Name="ResourceName">Analysis Services (HASQL)</Data>
    <Data Name="Status">1067</Data>
</EventData>
</Event>
Log Name:      System
Source:        Microsoft-Windows-FailoverClustering
Date:          4/10/2014 11:48:49 AM
Event ID:      1069
Task Category: Resource Control Manager
Level:         Error
Keywords:
User:          SYSTEM
Computer:      HQ-HASQL-1.sbgnet.int
Description:
Cluster resource 'Analysis Services (HASQL)' of type 'Generic Service' in clustered role 'SQL Server (HASQL)' failed.
Based on the failure policies for the resource and role, the cluster service may try to bring the resource online on this node or move the group to another node of the cluster and then restart it. Check the resource and group state using Failover Cluster
Manager or the Get-ClusterResource Windows PowerShell cmdlet.
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
    <Provider Name="Microsoft-Windows-FailoverClustering" Guid="{BAF908EA-3421-4CA9-9B84-6689B8C6F85F}" />
    <EventID>1069</EventID>
    <Version>1</Version>
    <Level>2</Level>
    <Task>3</Task>
    <Opcode>0</Opcode>
    <Keywords>0x8000000000000000</Keywords>
    <TimeCreated SystemTime="2014-04-10T15:48:49.752168200Z" />
    <EventRecordID>26213</EventRecordID>
    <Correlation />
    <Execution ProcessID="6464" ThreadID="9076" />
    <Channel>System</Channel>
    <Computer>HQ-HASQL-1.sbgnet.int</Computer>
    <Security UserID="S-1-5-18" />
</System>
<EventData>
    <Data Name="ResourceName">Analysis Services (HASQL)</Data>
    <Data Name="ResourceGroup">SQL Server (HASQL)</Data>
    <Data Name="ResTypeDll">Generic Service</Data>
</EventData>
</Event>
With just these generic error messages being present, this has been difficult to diagnose. Some research has yielded possible resolutions of the Event Viewer log being full, .NET corruption, missing registry entries, but none of those seem to be the issue
(Event Viewer logs cleared, Analysis services is working on the same physical servers in a different cluster, and the registry entries was only a supported issue for SQL Server 2008 and 2008 R2).
Any help would be greatly appreciated.

Bring up Configuration Manager, look at binary path for SSAS. Make sure BOTH folders exist. Sometimes with failovers mappings get screwed up.

Why SCCM 20012 Install fails with remote 64 bit SQL Server but proceeds for remote 32 bit SQL Server

I have the following setup:
AD User accounts
- SQLAdmin (used to run SQL Services i.e. Database Engine)
- SCCMADmin (used to install SCCM 2012)
SPN registered for user account SQLAdmin
setspn -S MSSQLSvc/SQL.Domain_Name:1432 Domain_Naem\SQLAdmin
setspn -S MSSQLSvc/SQL:1432 Domain_Name\SQLAdmin
setspn -S MSSQLSvc/SQL.Domain_Name:1433 Domain_Naem\SQLAdmin
setspn -S MSSQLSvc/SQL:1433 Domain_Name\SQLAdmin
and checked with setspn -L TESTING\SQLAdmin
1 SERVER called SQL
32bit Server with SQL Server 2008 + SP3 + Cumulative Update 6
2 SQL instances - Default (MSSQLSERVER) and
SCCM2012
MSSQLSERVER instance uses TCP port 1433
SCCM2012 Instance users TCP port 1432 (no dynamic ports)
User accounts that have been given public and sysadmin SQL server roles
on both instances are: SQLAdmin, SCCMAdmin, Domain Administrator, Local Administrator and computer account SCCM
Client Protocols TCP enabled (and Named Pipes) (checked via SQL Server Configuration Manager)
Local Administrators Group on this server has members - SQLAdmin, SCCMAdmin, Domain Administrator, Local Administrator and computer account SCCM
Firewall turned on with access allowed on Ports 1432, 1433, 4022,445, and WMI - WMI-in, DCOM-in and ASync-iN builtin rules allowed\enabled.
1 SERVER called SQL3
64bit Server with SQL Server 2008 + SP3 + Cumulative Update 6
2 SQL instances - Default (MSSQLSERVER) and
SCCM2012
MSSQLSERVER instance uses TCP port 1433
SCCM2012 Instance users TCP port 1432 (no dymanic ports)
User accounts that have been given public and sysafmin SQL server roles on both instances are:
SQLAdmin, SCCMAdmin, Domain Administrator, Local Administrator and computer account SCCM
Client Protocols TCP enabled (and Named Pipes) (checked via SQL Server Configuration Manager)
Local Administrators Group on this server has members - SQLAdmin, SCCMAdmin, Domain Administrator, Local Administrator and computer account SCCM
Firewall turned off
1 SERVER called SCCM
64bit Server that is to be the Primary Site Server\MP for SCCM 2012
ODBC link to SQL\SCCM2012,1432
ODBC link to SQL3\SCCM2012,1432
ODBC uses SQL Native Client 10.0 (64 bit)
Both ODBC connections when TESTed pass and suggest connectivity to SQL Servers
Install process doe SCCM2012
Tried to install SCCM 2012 RC2 when logged in to SCCM Server as AD user account
SCCMAdmin, and when utilising the SCCM2012 SQL instance on
32 bit server of SQL install proceeds barring warning about 8GB rec, for SQL Server. Then fails on PKI certificate issue. Installation (chose HTTP for MP). I beleive the PKI failure as install starts is
due to the fact that SCCM 2012 needs its database server to b 64 bit ?
Thus i then tried to install SCCM 2012 RC2 when logged in to SCCM Server as AD user account SCCMAdmin, and
when using the SCCM2012 SQL instance on
64 bit server of SQL install proceeds but fails at checking stage and says:
SQL Server sysadmin rights FAILED SQL3.Domain_Name
Either the user account running Configuration Manager Setup does not have sysadmin SQL Server role permissions on the SQL Server instance selected for site database installation, or the SQL Server instance could not be contacted to verify permissions. Setup
cannot continue.
and
Site System to SQL Server communication WARNING SCCM.Domain_Name
A communication error has been detected between the specified site system and the site database computer. This error can occur when the site database server is offline or if a valid SPN has not been registered in Active Directory Domain Services for the SQL
Server instance hosting the site database. Setup cannot continue.
Why does the install of SCCM 2012 with 32 bit SQL proceed further than the install with 64 bit SQL, with the latter process failing as above error meesages show and yet both servers are set identically (apart from temporary turning off Firewall on the 64
bit server) and during the install the Databse Server specified is accepted ?

Thanks for the reply.
I can connect via ODBC to the the 32 bit SQL Server and the 64 bit SQL Server from the SCCM Server
The SQL Server Unit called SQL3 unit is a 64 bit SQL.
The SQL Server Unit called SQL is only 32 bit, but at least gets past the final checking stage and the error messages about sysadmin rights and Site System to SQL Server communication problem, and then fails with PKI certificate error message.
When trying to install SCCM specifying the 64 bit SQL Server as the Database Server it gives the 2 error messages at the final checking stage of the installation as listed.
So as I said what is confusing is the fact that if the SCCM install uses the remote 32 bit SQL Server it passes the final checking (although fails with PKI certificate message) but the 64 bit SQL Server set up exactly the same apart from the Firewall being
left off for the time being, fails at the final check stage with the 2 listed errors.
If I use a local 64 bit SQL Server the installation is fine.
Still would like to find out what cause the 2 issues for the remote 64 bit SQL Server, when ODBC seems fine, sysadmin rights have been given for the installer account and the SCCM computer account and SPNs have been set for the user account running the SQL
Services.

Why is the PWDCOMPARE function not supported on an Azure SQL Server 2014 database

I have tried to publish a database from our local SQL Server to Azure but receive an error saying PWDCOMPARE is not supported with no link to a reason why.
We are using HASHBYTES function to encrypt passwords in our database and
PWDCOMPARE to validate them and we currently don't have an alternative (see article: http://sqlity.net/en/2460/sql-password-hash/). The PWDCOMPARE function is referenced by a stored procedure,
which is what won't publish to Azure.
It would be useful to know if it will be supported or if we should create a VM instead.
EDIT: Further Clarified question above, but basically the functions listed are documented in MSDN and there is no mention of them being undocumented unsupported features.
The error occurs when trying to publish a database to Azure from SQL Server 2014 Management Studio

Hi,
I am not an expert to answer this but am trying my best to answer this query.
Hashes a password and compares the hash to the hash of an existing password. PWDCOMPARE can be used to search for blank SQL Server login passwords or common weak passwords.
Syntax
PWDCOMPARE ( 'clear_text_password'
, password_hash
[ , version ] )
Note: This feature will be removed in the next version of Microsoft SQL Server. Do not use this feature in new development work, and modify applications that currently use this feature as soon as possible.
I am not sure whether this feature is not available on SQL 2014.
I think you can solve this issue by using the EXECUTE AS. Add this query into a procedure with EXECUTE AS with the user/login with sufficient permissions on the server.
Refer to belw link for more details on EXECUTE AS
http://msdn.microsoft.com/en-us/library/ms188354.aspx
create
procedure checkpassword
@UserName
SYSNAME
,@Password
VARCHAR(1000)
WITH
EXECUTE AS
'<UserName>'
as
select
pwdcompare(@Password,convert(nvarchar(128),password))
from master.dbo.syslogins
(nolock)
where name=@UserName
GO
EXEC checkpassword
@UserName='test',@Password='12345678'
Girish Prajwal

Why I cant type correct single quotation mark in SQL Server 2014 (Please see the pic below)

Similar Messages

Maybe you are looking for