Why I have to mute Audio Voice Recording Track always in order to subdue the voice recorded when I want to solo other tracks, audio or midi for listening.The other audio tracks don't sound without being muted. Please advise how to deal with this .Thanks

Why I have to mute the Audio Voice recording track  ( the first voice track ) always in order to sudue its recorded sound while I want to listen to other
tracks ( either audio or midi tracks ) in solo ?The other audio tracks with voice recording do not have to be muted in order not to  interfere with other
tracks turned on solo. Can someone kindly explain this phenomenon and any way to fix this ?
Thanks
Dan

Thanks, ATR,
I wll try this--but I still am unclear on how to do what the Manual says is possible: select clips on another track that WILL be moved, if I so desire, so as to remain synched to the main Video track.
UPDATE:
In the case of inserting Freeze Frame, I just tried both Ctrl method and Alt method, and neither worked.
1. Put Video on Vid1 track
2. Put Music on Sound Track
3. Ran a few seconds of Vid
4. Stopped Vid, selected Freeze Frame
5. Held down Ctrl key while clicking "Insert in Movie"  also tried with holding down Alt key.
Result: a 3 second still was inserted int the Vid1 track.  A corresponding gap was created in the Sound Track.
6. Slid the final part of the Sound Track to the left along the timeline to re-connect it to the next segment created by the above process.
Result: the video following the final Freeze Frame was pushed to the right end of  Video1 track.
7. Slid the Sound Track all the way to the left.
Result: the entire Video 1 Track contents were pushed to the right and divided in pieces.
I documented each step with screen shots which I can send if you want them and if I can figure out how to do it.
UPDATE #2
In the case of inserting a video clip to the Timeline, I just tried both Ctrl method and Alt method, and neither worked.
1. Locate video in Project Assets
2a. R click video in Project Assets (pull-down menu appears), hold down Ctrl, click Insert to Timeline.
Result: Vid clip is inserted on Video 1 track, Sound Track is separated with a corresponding gap.
2b.  R click video in Project Assets (pull-down menu appears), push Alt
Result: pull-down menu disappears as soon as Alt is pushed down.
I can stil drag the Vid clip but it's one more manual step...I love shortcuts!!

Similar Messages

  • I am trying to open pdf in Pro and not Reader.  Please advise how I can fix this.

    I am trying to open pdf in Pro and not Reader.  Please advise how I can fix this.

    Eric-
    FYI, this is a forum for storage and sharing...photoshop.com and revel. If you have acrobat issues you might want to make a note of the other forums:
    http://forums.adobe.com shows a list of all of them, and specifically http://forums.adobe.com/community/acrobat  this one for Acrobat
    But, since I have had this same issue myself...
    On Windows, locate your pdf document. Right click it and select "open with". Select Adobe Acrobat. That should do it. On MAC, I'm not sure but I'm guessing there is a similar setting.
    Good luck.
    Pattie

  • We have down loaded latest software for the ipod touch and now can't open up any Apps previously held on the Ipod touch. please advise how we can restore this without losing all the apps??

     

    You can transfer iTunes purchases to the computer by:
    iTunes Store: Transferring purchases from your iPhone, iPad, or iPod to a computer
    You can transfer other stuff by using the third-part programs discussed in this previous discussion:
    Best iPod to PC
    If you previously synced to another computer and do not have the backup files you will lose your app data.  You will have to restore to factory defaults/new iPod and then sync to the new computer.

  • HT201303 i cannot remeber my security answers. please advise how i can sort this out, to purchase more items

    help me to reset my security answers, as i have forgotten them

    Read here:
    http://support.apple.com/kb/HT5665

  • HT3529 My iPhone and my childrens iPods are both linked to the same Apple ID. unfortunately, iMessages sent to me are now appearing on my childrens screens. Some of which are inappropriate. Please advise how I can rectify this???

    How can I stop the iMessages I recieve to my iPhone showing up on my childrens iPods?
    We all use the same Apple ID and they use iMessage.
    Thanks for your help in advance

    best thing would be to turn imessage off on their device
    also you can go into settings, imessage on theire device, go into send and receive and uncheck your phone number  (on their ipods)  that way if a message is adressed to your phone number, they will not get it

  • PC crashed. Attempted to install NEW copy of Elements 10 that I had in reserve. Always get ERROR MESSAGE 400 when trying to open the program. Please advise how I get around this error.

    My PC crashed. I rebuilt it from scratch and tried to install my unopened copy of Elements 10. I get error message 400 when trying to open the program. Windows 8.1 64bit

    if that's a network connection error, Sign in, activation, or connection errors | CC, CS6, CS5.5

  • After a PC crash i managed to restore my iTines library only partially. My music is there, but my ratings ant playlists are missing. Please advise how to fix this.

    After a PC crash I managed to restore my iTunes Library only partially.
    My music is all there. But my ratings and playlists are missing.
    Please advise how I can fix this.
    On my IPod Classic a still have all the music and the playlists. Is it possible to use this? Synchronise from i-Pod to iTunes??

    Hi, I have a similar problem on my iMac with unusable internal drive: https://discussions.apple.com/thread/3031967
    Dirtylobster wrote:
     4. Install win7 in your brand new virtual environment but after first step in the installation where it will reboot after unpacking the files - TURN OFF YOUR VIRTUAL MACHINE. You got 10 seconds to do that.
    Failure to do so will mess up the install and you must start over.
    I'm not sure if I should take a chance... Could you please explain step 4 a bit more detailed? Do I have to click on "reboot" (where?) and then within 10 seconds turn off the virtual machine? HOW would I do that? THANKS!
    EDIT: Did you read the following too?
    http://forums.macrumors.com/showthread.php?p=10601274
    What do you think of this alternative...? Thanks again.
    Message was edited by: coxorange

  • Hi, i have problem with my apple id when i want purchase app even free one, asked me for complete my card informations... but i don't want to use debit card because already i have gift card and charge it in my id... please help

    hi, i have problem with my apple id when i want purchase app even free one, asked me for complete my card informations... but i don't want to use debit card because already i have gift card and charge it in my id... please help me.
    when i unchek the card information it was show me an error!

    Though you are being asked for card details it doesn't necessarily mean that the card will be charged for the purchase (unless you want to gift content). Have you tried entering your card's details to confirm the account ? You should then be able to remove it.
    From http://support.apple.com/kb/HT5582 :
    When making purchases, content credits are used first, followed by Gift Certificate, iTunes Card, or Allowance Account credits; your credit card or PayPal account is then charged for any remaining balance
    Is it a new account ? If it is then unless a new account is created by following the instructions on this page (the instructions won't work with existing accounts) : http://support.apple.com/kb/HT2534
    then you will need to enter card details (debit cards are no longer accepted in all countries) before the account can be used to download any item from the store.

  • Can anyone please help? Every time I start up my imac OSX 10.6 desktop my Aperture 3 programme opens up without being requested. Is it possible to stop this from happening and only open by using the desktop icon? Thank you for any assistance.

    Can anyone please help? Every time I start up my imac OSX 10.6 desktop my Aperture 3 programme opens up without being requested. Is it possible to stop this happening and only allow Aperture to open by using the desktop icon? Thank you for any assistance anyone may be able to give.
    Best regards, John.

    because there is absolutely no mention in my System Preferences of either Users & Groups nor Start Up Items.
    John,
    William's solution was much easier - just for completeness sake: The preferences panes to edit your startup items moved between the Mac OS X updates: I forgot that the "Users&Groups" preference pane used to be called "Users" in Mac OS X 10.6; it is the panel that you use to create new User accounts; and earlier systems had a separate preferences panel "Login" to enable and to disable the applications that are launched at login. Both are now combined in "Users&Groups". Sorry for sending you on a wild goose chase with the wrong Preferences panel.
    Regards
    Léonie

  • I have attempted to download the free trial of Acrobat XI, the application file appears to be in the download folder however the setup progress bar was hanging so I cancelled.  Now I don't know what to do, please advise

    Please advise how I install the free trial of Adobe Acrobat XI Pro.  I started the download process and can see the files in the Downloads folder however the setup screen was hanging so I cancelled.  Now I don't know what to do.  It goes back to the original download screen

    Thanks Pat
    I have now brought my daughters laptop into work as she has CS6 so I thought it would be easier to set up her laptop to the work network, set up an email account for her and attempt to email my 270 certificates that way. How wrong was I.  First of all Acrobat X Pro would not open so I did a reinstall.  Still wouldnt open so I had to find a patch to fix it.  I can now open it.  When I open Word 2013 and check the options, the PDFMaker is in the active section but when I open word the Adobe toolbar is not appearing. I've opened Acrobat X Pro and have discovered that it's missing a plugin - Convert2AdobePdf (DistillerPI.api) so I'm now in the process to find out how to install this plugin.  I have seen through this site that there was a problem with Word 2013 and the Adobe Toolbar which is exactly my new problem.  I have to say, after 3 days of trying to perform what you would think is a very simple function, I'm ready to just convert 270 individual pdf's and email them individually, I would have had the job done by now !

  • I have installed Adobe packages and cannot find the Acrobat extension folder please advise how can I get these applications to load onto my computer?

    I have installed Adobe Creative Cloud for teams CC Packages which says that Acrobat XI Pro is installed. Your support page says it does not install Acrobat and I have to look in the Extensions folder for an MSI file.  I have run a number of searches and  cannot find the Acrobat extension folder please advise how can I get these applications to load onto my computer?
    Also I now administer the teams and have accepted the invitation to I received to be a team member and download the apps.  The admin page shows that I have been sent an invitation but does not show my account as "ACtive" unlike my other team members.  I tried to use the link in the invite to accept it become active but the link displayed an error saying I had already accepted the invite... why is no account not active?
    Finally what other product downloads in Creative Cloud do not actually download as part of the Creative cloud Packager for downloading the apps? e.g. acrobat and what else?

    My apologies Eadeszoo I believe our support agents are unavailable on January 1.
    Are you able to copy the contents of the DVD to your computer?  Are you receiving any particular error messages when you are trying to install?  Finally which operating system are you using?

  • I have a CD burner yet I cannot burn or copy on CD from my collection. When I click on File - burn to CD I get:"To burn to CD you require a CD writer -  Please advise how to burn a collection on a CD Thank you Diane

    Please advise how to burn a collection on a CD - When I click on File then burn to CD - I get:To burn CD you require a CD writer  yet I have one -  which I have used many times with another package.  Also where are the pictures that I have put into a collection stored?  I cannot find them.  I can display them so they have to be stored somewhere in a file or folder etc...I am retired and very new at using this Adobe photoshop edition 3.2  Thank you for your help I am desperate.

    Once the tracks are in your library, you can right-click and use the command Get Album Artwork.  This command will attempt to match your track(s) to the item in the iTunes Store, and get the cover art.
    If that command does not succeed, you will need a copy of the art in .JPG format, either by scanning your CD cover, or by getting it from the web.  Once you have the art, right-click the track, choose Get Info, go the Artwork tab and paste it in.

  • I can't backup my iPhone 5. It says I don't have enough storage. So I've deleted like 6-7 apps and its still says I don't have enough storage. And it also says the say thing when I want to buy new apps or music. What can I do?

    I can't backup my iPhone 5. It says I don't have enough storage. So I've deleted like 6-7 apps and its still says I don't have enough storage. And it also says the same thing when I want to buy new apps or music. Also my messages won't send; I have to turn my phone off and resend then just to they can send. I can't even take any pictures because it says I have no storage.(I currently have 1,658 photos and 72 videos by the way.) What can I do? I just my phone in late December. I didn't think it would act up this bad before I even had it for a year. Please help.

    Your phone needs more storage, buying storage on iCloud.com doesn't change that.
    Delete some of the stuff off of your phone, it's full.

  • Do you have any ideas why Motion 5 would run slow on a computer? I have an Imac with 8Gigs of ram, and plenty of hard drive space, but it still gives me the beach ball when I add a few lights and effects. I'm at the end of my rope.

    Do you have any ideas why Motion 5 would run slow on a computer? I have an Imac with 8Gigs of ram, and plenty of hard drive space, but it still gives me the beach ball when I add a few lights and effects. I'm at the end of my rope.

    You probably don't really need 1080 at 60 for your finished projects but since you're just starting out with Motion, you need to lower your expectations. A long way. 1080 is about 2 million pixels per frame, DV is only about 400,000. That's not just five times as many pixels for the Mac to track; everything in video is exponential.
    Explore the training tutorials available by Mark Spencer. You will get an idea of how his super powerful machine reacts with the software.
    Adding a light roughly doubles the processing time over flat scenes. Two lights increases processing again. Reflections require processing the lights and then calculating the reflections so add another quarter of the time required for flat scenes. Add camera movement, motion blur, and depth of field and you need exponentially more processing time for every frame. The preload of renders into RAM is one of the cooler features of Motion, as comapred to After Effects, but that takes tons of time, to.
    Try working in ye olde DV resolution for a few days. Get to know the software's limitations and what gets imposed by your Macintosh. Step up to 720p/30 and see how things slow down.

  • About 2/3 of the time I leave Firefox, it is evidently retained in memory so I can't restart it without using the task manager. I don't use Norton or Skype programs. How do I keep this from happening?

    About 2/3 of the time I leave Firefox, it is evidently retained in memory so I can't restart it without using the task manager. I don't use Norton or Skype programs. How do I keep this from happening?
    == After I have used Firefox and "closed" it.

    See this:
    https://support.mozilla.com/en-US/kb/Firefox+hangs#Hang_at_exit

Maybe you are looking for

  • Can we export DATA from all tables in a schema?

    Hi, I have a question; Can we export all the DATA from all the tables present in the schema to any source (eigther CSV, TXT, DAt, etc..)? Or Can I have a PL/SQL procedure to display DATA from all Tables in a schema? With Best Regards, - Naveed

  • I have an iPhone 4 but when I block a number it still gets through

    So I really want to block this number, I don't want to talk to this guy anymore. He's just bothering me and I want nothing to do with him. I blocked him before and it worked but it isn't working now. I have the iPhone 4 and he has an iPhone also but

  • Problem using AT..NEW statement

    I have a internal table with structure posting_date   amount 20090317       1500000 20090317      -950000 20090317        5000 20090319       8700 20090327       400000 20090327       32000 I am using AT NEW POSTING_DATE  to perform some operation on

  • How to save pdf files from mail to i pad2

    How can i save a pdf file from e mail to the i pad2 ???

  • How do I read inches instead of pixels, in the develop module

    How do I read inches instead of pixels, in the develop module. I am not discussing resolution. When I crop, I need to see the numbers in inches, not pixels. I am not exporting to anything. From the develop module I go on to the print module. However