Why is Firefox 6.0.2 really slow compared to previous Firefox versions?

After updating to Firefox 6.0.2 , all web pages to every place I visit takes a long time to load. No matter what I try, this version is slow! I have restarted Firefox in safe mode. I have disabled all add-on's and extensions. I have uninstalled and reinstalled Firefox. I have have been using Firefox since April 2010, and it had always been fast; until this junk version 6.0.2 came along.
Have you not read reviews online at cnet, or other web browser article sites? Many people are all having the same or really close to these particular issues.
Please get Firefox back to the speed it had, like those of the previous Firefox versions.

Did it work fast in 6.0.1? or 5.0? Are you really sure that the problems you're describing started in this particular version.
Could you go to mozilla.org and download 7.0 and see if that solves it for you again? It's a much faster version.

Similar Messages

BO4 - Finding IDT tool really slow compared to UDT

Hi,
Finding Information Design Tool really slow compared to Universe Design Tool.
Screens take long time to display etc.
Other client tools seem fine.
Any tips on making it faster.
Also, getting messag Unknown error in SL Service (WIS 00000)
Thanks

Hi,
Thanks for repsonse.
Other client tools have are fine.
When disabled the Macafee anti-virus found it far quicker.
The enabled it also quicker as it some kind of conflict with the anti-virus software.
Do you know how to stop Macafee scanning BO.exes?
Many Thanks

Why is transferring music onto iphone really slow?

for a couple of updates now the moving of music onto ipods/iphones has been really slow, sometimes it adds to the device but remains blacked out on iTunes or sometimes it says complete but hasn't added to the device ?!
what happened to the simple drag and drop? iTunes got so fancy it no longer does the job it was meant to!!

It depends on where you download them from; I have plenty of jazz in Podcast.
http://i1224.photobucket.com/albums/ee374/Diavonex/Album%201/e9c12fefb0b9a17c3b7 dd951dee34812.jpg

WHY HAS MY APPLE IMAC GONE REALLY SLOW

HI all,
i have a 17 inch imac i gig ram 160 gb hdd
after installing opera (which i have now deleted) my mac has turned really slow
i turn it on then it loads for about 15 minutes..... then it goes into mac and haveto wait another 15 minutes for it to return to normal then only can i use it normally
can nayone help
regrds
shakeel

Welcome to the Apple Discussions!
Let me refer you to an excellent website about maintaining Mac OS X. It also has great troubleshooting tips and ideas. The site is maintained by a regular contributor to the Apple Discussions, Dr. Smoke. The site is the X Lab.
Some of the things that you might try are Repairing Permissions from Apps/Utilities/Disk Utility. Resetting the PRAM. Also making sure that the Cron Scripts have actually been running on your Mac. The X Lab can instruct you in all of these ideas and more.

Universe results in BOE XI 3.1 really slow compared to BOE XI R2

Hello,
Our system is BOXI 3.1 fp 1.6 installed on a Windows Server 2003 Standard Edition SP2 (3,5 GB RAM). The database that we are using is Oracle 10g (production system).
We are geting really slow results in one universe in BOE XI R3.1 compared to the same universe in BOE XI R2 (We have migrated this universe from BOE R2)
In BOE R2, in order to get the results it takes between 10 seconds and 1-2 minutes, but the same query, in BOE R3.1 it varies from 1 minute to 15 minutes, and it's not always the same time.
The first time it takes less time compared to other requests in order to get the results, and the query gets all the cpu from the server.
I have tried to optimize the table, using indexes and so on, but we have the same results in BOE R3.1
We are quering a big table (about 300-350.000 registers) that is partitioned by date.
I have tried to analyze the query that produces BO, and if I run the query in a query tool (like toad), it takes about 5-10 seconds in order to get ALL the results
Any way to solve this? Thank you.

Hi Seb,
This is not working. I tried the same in one of the Test ID (This is an Enterprise Account).
But i am getting the message "Account information not recognized: Access is denied" in the CMC login page.
I logged in via Administrator and verified the Test ID. The account is enabled.
Please any help.
Thank you.
regards,
Kiruba v.r.

IMac really slow compare to my new macbook air which i bought several month ago. What should i do to get my iMac fast?

I have just bought a new Macbook Air several month ago, and i realize that my iMac is very very slow compare with the macbookair, what should i do to faster my iMac,
This few point happen slow at my iMac:
When Restart it is very slow.
When search spotlight or search a file using finder.
When Running iPhoto, iTunes, iMovie. Especially iPhoto
When transfering image from my phone to iphoto.
When Open New Application.
When working in multi application when swich between application, sometimes it was hang for a few second.
Sometimes typing aslo slow and the text wont come out and the cursor hold a few second.
I think above 7 points was very annoying my working, especially when in a rush.
Model Name:          iMac
Model Identifier:          iMac12,1
Processor Name:          Intel Core i5
Processor Speed:          2.5 GHz
Number of Processors:          1
Total Number of Cores:          4
L2 Cache (per Core):          256 KB
L3 Cache:          6 MB
Memory:          4 GB
Boot ROM Version:          IM121.0047.B1F
HD Capacity:          499.25 GB (499,248,103,424 bytes)
Running OSX 10.9.2
Could anybody help me to solve this problem, i am guesing maybe my HDD not working properly, or if i change to SSD it will be better? but how?
Thanks to all of you that willing to help me.

1. This procedure is a diagnostic test. It changes nothing, for better or worse, and therefore will not, in itself, solve the problem. But with the aid of the test results, the solution may take a few minutes, instead of hours or days.
2. If you don't already have a current backup, back up all data before doing anything else. The backup is necessary on general principle, not because of anything in the test procedure. Backup is always a must, and when you're having any kind of trouble with the computer, you may be at higher than usual risk of losing data, whether you follow these instructions or not.
There are ways to back up a computer that isn't fully functional. Ask if you need guidance.
3. Below are instructions to run a UNIX shell script, a type of program. All it does is to collect information about the state of the computer. That information goes nowhere unless you choose to share it. However, you should be cautious about running any kind of program (not just a shell script) at the request of a stranger. If you have doubts, search this site for other discussions in which this procedure has been followed without any report of ill effects. If you can't satisfy yourself that the instructions are safe, don't follow them. Ask for other options.
Here's a summary of what you need to do, if you choose to proceed:
☞ Copy a line of text in this window to the Clipboard.
☞ Paste into the window of another application.
☞ Wait for the test to run. It usually takes a few minutes.
☞ Paste the results, which will have been copied automatically, back into a reply on this page.
The sequence is: copy, paste, wait, paste again. You don't need to copy a second time. Details follow.
4. You may have started the computer in "safe" mode. Preferably, these steps should be taken in “normal” mode, under the conditions in which the problem is reproduced. If the system is now in safe mode and works well enough in normal mode to run the test, restart as usual. If you can only test in safe mode, do that.
5. If you have more than one user, and the one affected by the problem is not an administrator, then please run the test twice: once while logged in as the affected user, and once as an administrator. The results may be different. The user that is created automatically on a new computer when you start it for the first time is an administrator. If you can't log in as an administrator, test as the affected user. Most personal Macs have only one user, and in that case this section doesn’t apply. Don't log in as root.
6. The script is a single long line, all of which must be selected. You can accomplish this easily by triple-clicking anywhere in the line. The whole line will highlight, though you may not see all of it in the browser window, and you can then copy it. If you try to select the line by dragging across the part you can see, you won't get all of it.
Triple-click anywhere in the line of text below on this page to select it:
PATH=/usr/bin:/bin:/usr/sbin:/sbin:/usr/libexec;clear;cd;p=(Software Hardware Memory Diagnostics Power FireWire Thunderbolt USB Fonts 51 4 300 25 5120 KiB/s 1024 85 \\b% 10240 1 MB/s 25000 ports 'com.autodesk.AutoCad com.evenflow.dropbox com.google.GoogleDrive' DYLD_INSERT_LIBRARIES\ DYLD_LIBRARY_PATH -86 ` route -n get default|awk '/e:/{print $2}' ` 25 N\\/A down up 102400 25600 recvfrom sendto CFBundleIdentifier 25 50 );N5=${#p[@]};p[N5]=` networksetup -listnetworkserviceorder|awk ' NR>1 { sub(/^$[0-9]+$ /,"");n=$0;getline;} $NF=="'${p[45]}')" { sub(/.$/,"",$NF);print n;exit;} ' `;f=('\n%s: %s\n' '\n%s\n\n%s\n' '\nRAM details\n%s\n' %s\ %s '%s\n\t(%s)\n' );S0() { echo ' { q=$NF+0;$NF="";u=$(NF-1);$(NF-1)="";gsub(/^ +| +$/,"");if(q>='${p[$1]}')printf("%s (UID %s) is using %s '${p[$2]}'\n",$0,u,q);} ';};s=(' /^ *$|CSConfigDot/d;s/^ */   /;s/[-0-9A-Fa-f]{22,}/UUID/g;s/(ochat)\.[^.]+(\..+)/\1\2/;/Shared/!s/\/Users\/[^/]+/~/g ' ' s/^ +//;5p;6p;8p;12p ' ' {sub(/^ +/,"")};NR==6;NR==13&&$2< '${p[10]} ' 1,5d;/[Bmy].*:/d;H;$   { g;/s: [^EO]|x([^08]|02[^F]|8[^0])/p;} ' ' 5h;6   { H;g;/P/!p;} ' ' ($1~/^Cy/&&$3>'${p[11]}')||($1~/^Cond/&&$2!~/^N/) ' ' /:$/{ s/ *:$//;x;s/\n//;/Apple|Genesy|Intel|SMSC/d;s/\n.*//;/\)/p;};/^ *(V.+ [0N]|Man).+ /{ s/ 0x.... //;s/[()]//g;s/(.+: )(.+)/ (\2)/;H;} ' ' s/^.*C/C/;H;$   { g;/No th|pms/!p;} ' '/= [^GO]/p' '{$1=""};1' ' /Of/!{ s/^.+is |\.//g;p;} ' '/(sh|ng|ic)$/p' ' $3~/[0-9]:[0-9]{2}$/ { $4="";gsub(" "," ");gsub(/:[0-9:a-f]{14}/,"");} { print|"tail -n'${p[12]}'";} ' ' NR==2&&$4<='${p[13]}' { print $4;} ' ' END { $2/=256;if($2>='${p[15]}')print int($2) } ' ' NR!=13{next};{sub(/[+-]$/,"",$NF)};'"`S0 21 22`" 'NR==2'"`S0 37 17`" ' NR!=5||$8!~/[RW]/{next};{ $(NF-1)=$1;$NF=int($NF/10000000);for(i=1;i<=3;i++){$i="";$(NF-1-i)="";};};'"`S0 19 20`" 's:^:/:p' '/\.kext\/(Contents\/)?Info\.plist$/p' ' s/^.{52}//;s/ .+//p ' ' /Launch[AD].+\.plist$/;END{if(NR<100)print "/System/";} ' '/\.xpc\/(Contents\/)?Info\.plist$/p' ' NR>1&&!/0x|\.[0-9]+$|com\.apple\.launchctl\.(Aqua|Background|System)$/ { print $3;} ' '/\.(framew|lproj)/d;/plist:|:.+(M.+exec|scrip)/s/:[^:]+//p' '/root/p' ' !/\/Contents\/.+\/Contents|Applic|Autom|Frameworks/&&/Lib.+\/Info.plist$/;END{if(NR<100)print "/System/"};' '/^\/usr\/lib\/.+dylib$/p' '/\/etc\/(auto_m|hosts[^.]|peri)/s/^\.\/[^/]+//p' ' /\/(Contents\/.+\/Contents|Frameworks)\//d;p;' 's/\/(Contents\/)?Info.plist$//;p' ' { gsub("^| ","||kMDItem'${p[35]}'=");sub("^.."," ") };1 ' p '{print $3"\t"$1}' 's/\'$'\t''.+//p' 's/1/On/p' '/Prox.+: [^0]/p' '$2>'${p[9]}'{$2=$2-1;print}' ' BEGIN { i="'${p[26]}'";M1='${p[16]}';M2='${p[18]}';M3='${p[31]}';M4='${p[32]}';} !/^A/ { next;} /%/ { getline;if($5<M1) a="user "$2"%, system "$4"%";} /disk0/&&$4>M2 { b=$3" ops/s, "$4" blocks/s";} $2==i { if(c) { d=$3+$4+$5+$6;next;};if($4>M3||$6>M4) c=int($4/1024)" in, "int($6/1024)" out";} END { if(a)print "CPU: "a;if(b)print "I/O: "b;if(c)print "Net: "c" (KiB/s)";if(d)print "Net errors: "d" packets/s";} ' ' /r\[0\] /&&$NF!~/^1(0|72\.(1[6-9]|2[0-9]|3[0-1])|92\.168)\./ { print $NF;exit;} ' ' !/^T/ { printf "(static)";exit;} ' '/apsd|OpenD/!s/:.+//p' ' (/k:/&&$3!~/(255\.){3}0/ )||(/v6:/&&$2!~/A/ ) ' ' /lR/ { if($2<='${p[25]}')print $2;} ' ' BEGIN { FS=":";} { n=split($3,a,".");sub(/_2.+/,"",a[n-1]);b=b"\n"$2" "a[n-1]" "a[n]" "$1;c=c$1;} END { d="sort";print b|d;close(d);if(c)print("\n\t* Code injection");} ' ' NR!=4{next} {$NF=int($NF/10240)} '"`S0 27 14`" ' END { if($3~/[0-9]/)print$3;} ' ' BEGIN { L='${p[36]}';} !/^[[:space:]]*(#.*)?$/ { l++;if(l<=L)f=f"\n\t"$0;} END { F=FILENAME;if(!f) f="\n\t[N/A]";"file -b "F|getline T;if(T!~/^(A.+ E.+ text$|POSIX sh.+ text ex)/) F=F" ("T")";printf("\nContents of %s\n%s\n",F,f);if(l>L) printf("\n\t...and %s more line(s)\n",l-L);} ' ' BEGIN{FS="= "} /Path/{print $2} ' ' /^ +B/{ s/.+= |(-[0-9]+)?\.s.+//g;p;} ' ' END{print NR} ' ' /id: N|te: Y/{i++} END{print i} ' '/:/!p' ' /:/{$0="'"${p[28]}"'"};1;' ' $0;END { if(NR<100)print "com.apple.";} ' );c1=(system_profiler pmset\ -g nvram fdesetup find syslog df vm_stat sar ps sudo\ crontab sudo\ iotop top pkgutil PlistBuddy whoami cksum kextstat launchctl sudo\ launchctl crontab 'sudo defaults read' stat lsbom mdfind ' for i in ${p[24]};do ${c1[18]} ${c2[27]} $i;done;' defaults\ read scutil sudo\ dtrace sudo\ profiles sed\ -En awk /S*/*/P*/*/*/C*/*/airport networksetup );c2=(com.apple.loginwindow\ LoginHook '-c Print /L*/P*/loginw*' '-c Print L*/P*/*loginit*' '-c Print L*/Saf*/*/E*.plist' '~ $TMPDIR.. $ -flags +sappnd,schg,uappnd,uchg -o ! -user $UID -o ! -perm -600 $' '.??* -path .Trash -prune -o -type d -name *.app -print -prune' '-c Print\ :'${p[35]}' 2>&1' '-c Print\ :Label 2>&1' '{/,}L*/{Con,Pref}* -type f ! -size 0 -name *.plist -exec plutil -s {} \;' "-f'%N: %l' Desktop L*/Keyc*" therm sysload boot-args status '-F bsd -k Sender kernel -k Message CReq "Beac|caug|dead[^l]|GPU |hfs: Ru|inval|jnl:|last value [1-9]|n Cause: -|NVDA$|pagin|proc: t|Roamed|rror|ssert|Thrott|timed? ?o|WARN" -k Message Ane "SMC:" -o -k Sender fseventsd -k Message CReq "SL"' '-du -n DEV -n EDEV 1 10' 'acrx -o comm,ruid,%cpu' '-t1 10 1' '-f -pfc /var/db/*/*.{BS,Bas,Es,OSXU,Rem}*.bom' '{/,}L*/Lo*/Diag* -type f \( -exec grep -lq "^Thread c" {} \; -exec printf \* \; -o -true $ -execdir stat -f:%Sc:%N -t%F {} \;' '-L {/{S*/,},}L*/Lau* -type f' '-L /{S*/,}L*/StartupItems -type f -exec file {} +' '-L /S*/L*/{C*/Sec*A,E}* {/,}L*/{A*d,Compon,Ex,In,iTu,Keyb,Mail/B,P*P,Qu*T,Scripti,Sec,Servi,Spo}* -type f -name Info.plist' '/usr/lib -type f -name *.dylib' `awk "${s[31]}"<<<${p[23]}` "/e*/{auto_master,{cron,fs}tab,hosts,{launchd,sysctl}.conf} /u*/lo*/e*/per*/*/* .launchd.conf" list getenv /Library/Preferences/com.apple.alf\ globalstate --proxy '-n get default' -I --dns -getdnsservers -getinfo\ "${p[N5]}" -P -m\ / '' -n1 '-R -l1 -n1 -o prt -stats command,uid,prt' '--regexp --only-files --files com.apple.pkg.*|sort|uniq' -kl -l );N1=${#c2[@]};for j in {0..8};do c2[N1+j]=SP${p[j]}DataType;done;N2=${#c2[@]};for j in 0 1;do c2[N2+j]="-n 'syscall::'${p[33+j]}':return {@out[execname,uid]=sum(arg0)} tick-10sec {trunc(@out,1);exit(0)}'";done;l=(Restricted\ files Hidden\ apps RAM POST Battery Safari\ extensions Bad\ plists 'High file counts' User Heat System\ load boot\ args FileVault Diagnostic\ reports Log 'Free space (MiB)' 'Swap (MiB)' Activity 'CPU per process' Login\ hook 'I/O per process' Mach\ ports kexts Daemons Agents launchd Startup\ items Admin\ access Root\ access Bundles dylibs Apps Font\ issues Inserted\ dylibs Firewall Proxies DNS TCP/IP RSSI Profiles 'Elapsed time (s)' Root\ crontab User\ crontab 'Global login items' 'User login items' );N3=${#l[@]};for i in 0 1 2;do l[N3+i]=${p[5+i]};done;N4=${#l[@]};for j in 0 1;do l[N4+j]="Current ${p[29+j]}stream data";done;A0() { id -G|grep -qw 80;v[1]=$?;((v[1]==0))&&sudo true;v[2]=$?;v[3]=`date +%s`;clear;};for i in 0 1;do eval ' A'$((1+i))'() { v[0]=` eval "${c1[$1]} ${c2[$2]}"|'${c1[30+i]}' "${s[$3]}" `;[[ "${v[0]}" ]];};A'$((3+i))'() { v[0]=` while read i;do eval "${c1[$1]} ${c2[$2]}" \"$i\"|'${c1[30+i]}' "${s[$3]}";done<<<"${v[$4]}" `;[[ "${v[0]}" ]];};A'$((5+i))'() { v[0]=` while read i;do '${c1[30+i]}' "${s[$1]}" "$i";done<<<"${v[$2]}" `;[[ "${v[0]}" ]];};';done;A7(){ v[0]=$((`date +%s`-v[3]));};B2(){ v[$1]="${v[0]}";};for i in 0 1;do eval ' B'$i'() { unset v[0];((v['$((i+1))']==0))||{ v[0]=No;false;};};B'$((3+i))'() { v[$2]=`'${c1[30+i]}' "${s[$3]}"<<<"${v[$1]}"`;} ';done;B5(){ v[$1]="${v[$1]}"$'\n'"${v[$2]}";};B6() { v[0]=` paste -d: <(echo "${v[$1]}") <(echo "${v[$2]}")|awk -F: ' {printf("'"${f[$3]}"'",$1,$2)} ' `;};B7(){ v[0]=`grep -Fv "${v[$1]}"<<<"${v[0]}"`;};C0(){ echo "${v[0]}";};C1() { [[ "${v[0]}" ]]&&printf "${f[$1]}" "${l[$2]}" "${v[0]}";};C2() { v[0]=`echo ${v[0]}`;[[ "${v[0]}" != 0 ]]&&C1 0 $1;};C3() { v[0]=`sed -E "${s[0]}"<<<"${v[0]}"`&&C1 1 $1;};for i in 1 2;do for j in 2 3;do eval D$i$j'(){ A'$i' $1 $2 $3; C'$j' $4;};';done;done;A0;{ A2 0 $((N1+1)) 2;C0;A1 0 $N1 1;C0;B0;C2 27;B0&&! B1&&C2 28;D12 15 37 25 8;D13 0 $((N1+2)) 3 2;D13 0 $((N1+3)) 4 3;D22 0 $((N1+4)) 5 4;for i in 0 1 2;do D13 0 $((N1+5+i)) 6 $((N3+i));done;D13 1 10 7 9;D13 1 11 8 10;D22 2 12 9 11;D12 3 13 10 12;A1 4 19 11;B4 0 0 44;C3 13;D23 5 14 12 14;D22 6 36 13 15;D22 7 37 14 16;D23 8 15 38 17;D22 9 16 16 18;B1&&D22 11 17 17 20;D22 12 39 15 21;A1 13 40 18;B2 4;B3 4 0 19;A3 14 6 52 0;B4 0 5 54;A1 17 41 20;B7 5;C3 22;B4 4 6 21;A3 14 7 52 6;B4 0 7 54;B3 4 0 22;A3 14 6 52 0;B4 0 8 54;B5 7 8;B1&&{ A2 19 26 23;B7 7;C3 23;};A2 18 26 23;B7 7;C3 24;A2 4 20 21;B7 6;B2 9;A4 14 7 53 9;B2 10;B6 9 10 4;C3 25;D13 4 21 24 26;B4 4 12 26;B3 4 13 27;A1 4 22 29;B7 12;B2 14;A4 14 6 53 14;B2 15;B6 14 15 4;B3 0 0 30;C3 29;A1 4 23 27;B7 13;C3 30;D13 24 24 32 31;A1 23 18 28;B2 16;A2 16 25 33;B7 16;B3 0 0 34;B2 21;A6 47 21&&C0;B1&&D13 21 0 32 19;D23 14 1 48 43;D23 14 2 48 44;D13 14 3 49 5;D22 4 4 50 0;D13 4 5 32 1;D22 0 $((N1+8)) 51 32;D13 4 8 41 6;D23 22 9 37 7;B1&&D13 10 42 32 41;D23 20 42 32 42;D13 25 37 32 33;D12 26 28 35 34;D13 27 29 36 35;A2 27 32 39&&{ B2 19;A2 33 33 40;B2 20;B6 19 20 3;};C2 36;D23 33 34 42 37;D22 32 31 43 38;B1&&for i in 0 1;do D22 28 $((N2+i)) 45 $((N4+i));done;B1&&D22 29 35 46 39;A7;C2 40;} 2>/dev/null|pbcopy;exit 2>&-
Copy the selected text to the Clipboard by pressing the key combination command-C.
7. Launch the built-in Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
Click anywhere in the Terminal window and paste by pressing command-V. The text you pasted should vanish immediately. If it doesn't, press the return key.
8. If you see an error message in the Terminal window such as "syntax error," enter
exec bash
and press return. Then paste the script again.
9. If you're logged in as an administrator, you'll be prompted for your login password. Nothing will be displayed when you type it. You will not see the usual dots in place of typed characters. Make sure caps lock is off. Type carefully and then press return. You may get a one-time warning to be careful. If you make three failed attempts to enter the password, the test will run anyway, but it will produce less information. In most cases, the difference is not important. If you don't know the password, or if you prefer not to enter it, press the key combination control-C or just press return three times at the password prompt. Again, the script will still run.
If you're not logged in as an administrator, you won't be prompted for a password. The test will still run. It just won't do anything that requires administrator privileges.
10. The test may take a few minutes to run, depending on how many files you have and the speed of the computer. A computer that's abnormally slow may take longer to run the test. While it's running, there will be nothing in the Terminal window and no indication of progress. Wait for the line
[Process completed]
to appear. If you don't see it within half an hour or so, the test probably won't complete in a reasonable time. In that case, close the Terminal window and report the results. No harm will be done.
11. When the test is complete, quit Terminal. The results will have been copied to the Clipboard automatically. They are not shown in the Terminal window. Please don't copy anything from there. All you have to do is start a reply to this comment and then paste by pressing command-V again.
At or near the top of the results, there will be a line that begins with "System Version." If you don't see that, but instead see a mass of gibberish, you didn't wait for the "Process completed" message to appear in the Terminal window. Please wait for it and try again.
If any private information, such as your name or email address, appears in the results, anonymize it before posting. Usually that won't be necessary.
12. When you post the results, you might see the message, "You have included content in your post that is not permitted." It means that the forum software has misidentified something in the post as a violation of the rules. If that happens, please post the test results on Pastebin, then post a link here to the page you created.
Note: This is a public forum, and others may give you advice based on the results of the test. They speak only for themselves, and I don't necessarily agree with them.
Copyright © 2014 by Linc Davis. As the sole author of this work, I reserve all rights to it except as provided in the Use Agreement for the Apple Support Communities website ("ASC"). Readers of ASC may copy it for their own personal use. Neither the whole nor any part may be redistributed.

Reload every is not compatible with firefox 6 how can I go back to previous firefox

I have more then one add on that is no longer usable with firefox 6 so I don't want it. How can I uninstall 6

'''[https://addons.mozilla.org/en-US/firefox/addon/reloadevery/ ReloadEvery]''' extension -- Reloads web pages every so many seconds or minutes.
If you look at the user comments they indicate that users are running it by upping the maxVer which you can do easily by ...
To force extensions that were working in Firefox 4 and Firefox 5, install
the [https://addons.mozilla.org/firefox/addon/add-on-compatibility-reporter/ Add-on Compatibility Reporter] extension. (more detail in item 15 see notes below)
If the above solutions solve your problem please mark as solved
You can make '''Firefox 6.0''' look like Firefox 3.6.*, see numbered items 1-10 in the following topic [http://dmcritchie.mvps.org/firefox/firefox-problems.htm#fx4interface Fix Firefox 4.0 toolbar user interface, problems (Make Firefox 4.0 thru 6.0, look like 3.6)]. ''Whether or not you make changes, you should be aware of what has changed and what you have to do to use changed or missing features.''
* http://dmcritchie.mvps.org/firefox/firefox-problems.htm#fx4interface
Instead of constantly refreshing, you could refresh a selection of tabs with the following extension:
Multiple Tab handler ( 74.8KB download) see my usage notes
* https://addons.mozilla.org/firefox/addon/multiple-tab-handler/
* http://dmcritchie.mvps.org/firefox/multiple_tab_handler.txt
If you want to test out the functionality of anything involving Tab use this test page. (the strange name is derived from my keyword shortcut to the page is "_")
* http://dmcritchie.mvps.org/firefox/tab_capacity/001_with_underscore.htm

Why does safari load iWeb authored pages so slow compared to, eg, firefox?

Safari latest Version 3.1.2 (5525.20.1) takes at least four times as long to load one of my iWeb authored pages as Fireforx 3.0.1. (That's with both apps having empty caches - if they've both been to the page before Safari performs even worse in comparison. One would have thought if any app was going to be optimised for iWeb pages it'd be Safari. Apparently not.
I've search here and in the Safari fora, and tried the delete safari plist, reset safari etc.
Cheers
D

What version of Safari on what Mac running what version of OS X?

Why does my mac transfer files so slow compared to a PC?

I am not very good at computers, but i noticed that my friend's computer (a PC) transfers files way faster than mine, and i don't think has better hardware than me. when i transfer files to a flash drive it takes around 30 mins to fully transfer 8 gigs of files, and his PC takes half the time. any ideas why his computer transfer files faster? can some one tell me what might be the difference between his PC and my MacBook Pro
My MacBook Pro has:
Processor: 2.3 GHz Intel Core i7
Memory: 8 GB 1333 MHz DDR3
Hard Drive: 750.16 TOSHIBA MK755MGSXF Media

30 mins. for 8 GB seems too long even for USB 2.0. If the flash drive is working at 60 MB/sec., the max speed for USB 2.0, it should take about 2.5 minutes to transfer the whole contents.
It may be slower because there are other USB peripherals on your Mac's USB bus...printer/scanner, display card, etc.?
USB flash memory has a format, just like a drive. Perhaps you'd get faster performance if you formatted the USB stick in the Apple format; (but I can't imagine that's the cause) or there's some other hangup with that hardware. Try another USB stick. If you buy a new one, insert it into the Mac, but before using it, go to Disk Utility and format it as Mac Extended.

Why is yosemite so slow compared to previous OS?

why has yosemite made my macbook so much slower than it was before?
how can I revert to an earlier version such as mountain lion?

Here are some articles that may assist you:
http://support.apple.com/kb/PH14176
https://discussions.apple.com/docs/DOC-6162
http://http://www.macworld.com/article/2458050/how-to-revert-to-mavericks-from-t he-yosemite-public-beta.html
Note that the same principles will apply to those articles that refer to Mavericks as the 'current' OSX.
You also can solve the problem by using the original installation disks that came with your MBP.
Ciao.

ABAP Trial performance really SLOW compared with IDES 4.7 (really fast)

Hi all
just a quick question
I'm running on an XP Virtual machine the full IDES V4.7 and performance is really GOOD. Transactions etc etc.
Now on an identically configfured Virtual machine with similar disks etc the APAP trial Preview runs FAR WORSE and slower. OK I know it's a newer release but there's no transactional stuff in it. The IDES uses around 45 - 60 GB disk soace BTW
The only difference I can see that might make a huge difference is the IDES uses the ORACLE DB system wheras the ABAP preview uses MAXDB DB system.
Incidentally for running VM's ALWAYS allocate the FULL virtual disk size you want when creating the VM. If you let the disks "grow" as in a normal VM this has horrendous implications for database type of applications.
Both VM's are running as 2GB RAM XP systems on a Host Windows 7 X-64 4GB machine.
Any Guru out there who might be able to explain the great IDES performance compared with the ABAP trial preview.
(Both VM's are run individually -- not at the same time).
Cheers
jimbo

Hi James,
I have the exact setup as you do (701 V3). Have you run SGEN? I also find that my performance is quite slow at first (presumable while the disk is allocating to memory) but it then speeds up quite quickly. Also, might help if you upgrade your ram if your planning on running both VM's at once. I'm currently allocating 3GB to my VM.
Transactions ST02 & ST06 may help you to trouble shoot your performance issues. Use RZ10 to alter your system parameters (assume you know this already).
Edited by: Paul Thomson on Mar 13, 2010 4:20 PM

Updated to firefox 6.0.1 2 hours ago. i have yahoo as home page. now, after the update, i do not get facebook messages in my yahoo mail. all was fine with previous version of firefox. tell me how to get back to previous firefox version.

1 am pdt update time

See McAfee support to find out how to disable that McAfee feature - that isn't part of the normal Firefox installation.

After updating to latest Firefox - when I click on google taskbar my CPU usage goes to 100% and stays there... and computer is really slow. No other search engine show the 100% usage like Google. There was NOT a problem with older versions of Firefox...?

My computer got really slow after updating to latest version of Firefox. I checked all processes and I was testing the system. THe CPU usage goes between 2 and 70 percent staying around 25% on average, when I check my e-mail. As soon as I click on Google taskbar (without even typing in anything) the CPU usage jumps to 100% and STAYS at 100 %, and computer extremely slow.

My computer got really slow after updating to latest version of Firefox. I checked all processes and I was testing the system. THe CPU usage goes between 2 and 70 percent staying around 25% on average, when I check my e-mail. As soon as I click on Google taskbar (without even typing in anything) the CPU usage jumps to 100% and STAYS at 100 %, and computer extremely slow.

Macbook pro runs really slow after sleep mode

My MBP ( MacBook Pro (13-inch, medio 2012), 2,5 GHz Intel Core i5, 8 GB 1600 MHz DDR3, Intel HD Graphics 4000 1024 MB), runs very slow after sleep mode. I notice that when I wake it up, my memory usage is nearly 8 GB. After a restart it is back no a normal level, between 2 and 5 GB depending on how many programs I am running. Any ideas what causes this? My IOS is Yosemite 10.10.2
Kind regards

Hi Japib
Thanks for your reply. Here is my report:
Problem description:
macbook pro is really slow after sleep mode
EtreCheck version: 2.1.8 (121)
Report generated 4 februari 2015 20:56:34 CET
Download EtreCheck from http://etresoft.com/etrecheck
Click the [Click for support] links for help with non-Apple products.
Click the [Click for details] links for more information about that line.
Hardware Information: ℹ️
    MacBook Pro (13-inch, Mid 2012) (Technical Specifications)
    MacBook Pro - model: MacBookPro9,2
    1 2.5 GHz Intel Core i5 CPU: 2-core
    8 GB RAM Upgradeable
        BANK 0/DIMM0
            4 GB DDR3 1600 MHz ok
        BANK 1/DIMM0
            4 GB DDR3 1600 MHz ok
    Bluetooth: Good - Handoff/Airdrop2 supported
    Wireless: en1: 802.11 a/b/g/n
    Battery Health: Normal - Cycle count 172
Video Information: ℹ️
    Intel HD Graphics 4000
        Color LCD 1280 x 800
System Software: ℹ️
    OS X 10.10.2 (14C109) - Time since boot: 1:36:41
Disk Information: ℹ️
    APPLE HDD TOSHIBA MK5065GSXF disk0 : (500,11 GB)
        EFI (disk0s1) <not mounted> : 210 MB
        Recovery HD (disk0s3) <not mounted> [Recovery]: 650 MB
        Macintosh HD (disk1) / : 498.88 GB (292.17 GB free)
            Encrypted AES-XTS Unlocked
            Core Storage: disk0s2 499.25 GB Online
    MATSHITADVD-R   UJ-8A8
USB Information: ℹ️
    Apple Inc. BRCM20702 Hub
        Apple Inc. Bluetooth USB Host Controller
    Apple Inc. Apple Internal Keyboard / Trackpad
    Apple Computer, Inc. IR Receiver
    Apple Inc. FaceTime HD Camera (Built-in)
Thunderbolt Information: ℹ️
    Apple Inc. thunderbolt_bus
Gatekeeper: ℹ️
    Mac App Store and identified developers
Kernel Extensions: ℹ️
        /Library/Application Support/Hotspot Shield
    [not loaded]    com.anchorfree.tun (1.0.1) [Click for support]
        /Library/Application Support/Kaspersky Lab/KAV/Bases/Cache
    [loaded]    com.kaspersky.kext.kimul.44 (44) [Click for support]
    [loaded]    com.kaspersky.kext.mark.1.0.5 (1.0.5) [Click for support]
        /Library/Extensions
    [loaded]    com.kaspersky.kext.klif (3.0.4a41) [Click for support]
    [loaded]    com.kaspersky.nke (1.6.4a15) [Click for support]
        /System/Library/Extensions
    [loaded]    com.hzsystems.terminus.driver (4) [Click for support]
    [not loaded]    com.olympus.CamBlockCommandsDeviceUP (3.1.0 - SDK 10.6) [Click for support]
    [not loaded]    com.roxio.BluRaySupport (1.1.6) [Click for support]
    [not loaded]    com.sony.driver.prs2 (1.0.3d1) [Click for support]
    [not loaded]    com.wacom.kext.pentablet (5.3.3 - SDK 10.8) [Click for support]
        /Users/[redacted]/Library/Services/ToastIt.service/Contents/MacOS
    [not loaded]    com.roxio.TDIXController (2.0) [Click for support]
Launch Agents: ℹ️
    [running]    com.epson.Epson_Low_Ink_Reminder.launcher.plist [Click for support]
    [failed]    com.epson.esua.launcher.plist [Click for support] [Click for details]
    [running]    com.epson.eventmanager.agent.plist [Click for support]
    [running]    com.kaspersky.kav.gui.plist [Click for support]
    [not loaded]    com.sony.ReaderDesktop.RunReaderDesktop.plist [Click for support]
    [not loaded]    com.trusteer.rapport.rapportd.plist [Click for support]
    [running]    com.wacom.pentablet.plist [Click for support]
Launch Daemons: ℹ️
    [loaded]    com.adobe.fpsaud.plist [Click for support]
    [loaded]    com.anchorfree.ajaxserver.plist [Click for support]
    [running]    com.kaspersky.kav.plist [Click for support]
    [loaded]    com.microsoft.office.licensing.helper.plist [Click for support]
    [loaded]    com.oracle.java.JavaUpdateHelper.plist [Click for support]
    [running]    com.trusteer.rooks.rooksd.plist [Click for support]
    [loaded]    com.tunnelbear.mac.tbeard.plist [Click for support]
User Launch Agents: ℹ️
    [loaded]    com.adobe.ARM.[...].plist [Click for support]
    [loaded]    com.google.keystone.agent.plist [Click for support]
    [loaded]    com.macpaw.CleanMyMac2Helper.diskSpaceWatcher.plist [Click for support]
    [running]    com.spotify.webhelper.plist [Click for support]
    [loaded]    com.valvesoftware.steamclean.plist [Click for support]
User Login Items: ℹ️
    iTunesHelper    Programma (/Applications/iTunes.app/Contents/MacOS/iTunesHelper.app)
    Documenten    Map (/Users/[redacted]/Documents)
    uTorrent    UNKNOWN (missing value)
    BambooCore    UNKNOWN (missing value)
    BambooCore    UNKNOWN (missing value)
    BambooCore    UNKNOWN (missing value)
    BambooCore    UNKNOWN (missing value)
    BambooCore    UNKNOWN (missing value)
Internet Plug-ins: ℹ️
    JavaAppletPlugin: Version: Java 7 Update 60 Check version
    WacomNetscape: Version: 2.1.0-1 - SDK 10.8 [Click for support]
    Default Browser: Version: 600 - SDK 10.10
    WacomTabletPlugin: Version: WacomTabletPlugin 2.1.0.2 [Click for support]
    AdobePDFViewerNPAPI: Version: 11.0.10 - SDK 10.6 [Click for support]
    FlashPlayer-10.6: Version: 16.0.0.296 - SDK 10.6 [Click for support]
    Silverlight: Version: 5.1.30514.0 - SDK 10.6 [Click for support]
    Flash Player: Version: 16.0.0.296 - SDK 10.6 [Click for support]
    QuickTime Plugin: Version: 7.7.3
    SharePointBrowserPlugin: Version: 14.4.7 - SDK 10.6 [Click for support]
    AdobePDFViewer: Version: 11.0.10 - SDK 10.6 [Click for support]
    MeetingJoinPlugin: Version: Unknown - SDK 10.6 [Click for support]
User internet Plug-ins: ℹ️
    Google Earth Web Plug-in: Version: 7.1 [Click for support]
Safari Extensions: ℹ️
    AdBlock
    DuckDuckGo
    Save to Pocket
    Awesome Screenshot
    URL Advisor
    Virtual Keyboard
3rd Party Preference Panes: ℹ️
    Flash Player [Click for support]
    Squeezebox [Click for support]
    Trusteer Endpoint Protection [Click for support]
Time Machine: ℹ️
    Auto backup: YES
    Volumes being backed up:
        Macintosh HD: Disk size: 498.88 GB Disk used: 206.70 GB
    Destinations:
        My Passport [Local]
        Total size: 999.83 GB
        Total number of backups: 17
        Oldest backup: 2013-11-06 17:55:38 +0000
        Last backup: 2014-10-14 11:30:39 +0000
        Size of backup disk: Adequate
            Backup size 999.83 GB > (Disk used 206.70 GB X 3)
Top Processes by CPU: ℹ️
        15%    mds
         5%    WindowServer
         0%    ocspd
         0%    fontd
         0%    kav
Top Processes by Memory: ℹ️
    223 MB    kav
    198 MB    Safari
    155 MB    Mail
    137 MB    mds_stores
    77 MB    WindowServer
Virtual Memory Information: ℹ️
    3.45 GB    Free RAM
    3.05 GB    Active RAM
    1.11 GB    Inactive RAM
    974 MB    Wired RAM
    1.64 GB    Page-ins
    0 B    Page-outs
Diagnostics Information: ℹ️
    Feb 4, 2015, 07:21:16 PM    /Users/[redacted]/Library/Logs/DiagnosticReports/EPSON Software Updater Agent_2015-02-04-192116_[redacted].crash
    Feb 4, 2015, 07:18:08 PM    Self test - passed
Hope this will shed some light on the problem.

My mac air is running really slow its painful

Problem description:
mac air running really slow since installing yosemite
EtreCheck version: 2.0.11 (98)
Report generated 7 November 2014 14:33:44 GMT
Hardware Information: ℹ️
MacBook Air (11-inch, Mid 2011) (Verified)
MacBook Air - model: MacBookAir4,1
1 1.6 GHz Intel Core i5 CPU: 2-core
2 GB RAM Not upgradeable
BANK 0/DIMM0
1 GB DDR3 1333 MHz ok
BANK 1/DIMM0
1 GB DDR3 1333 MHz ok
Bluetooth: Old - Handoff/Airdrop2 not supported
Wireless: en0: 802.11 a/b/g/n
Video Information: ℹ️
Intel HD Graphics 3000 - VRAM: 288 MB
Color LCD 1280 x 720
System Software: ℹ️
OS X 10.10 (14A389) - Uptime: one day 23:0:2
Disk Information: ℹ️
APPLE SSD SM064C disk0 : (60.67 GB)
S.M.A.R.T. Status: Verified
EFI (disk0s1) <not mounted> : 210 MB
Recovery HD (disk0s3) <not mounted> [Recovery]: 650 MB
Macintosh HD (disk1) / [Startup]: 59.46 GB (16.18 GB free)
Encrypted AES-XTS Unlocked
Core Storage: disk0s2 59.81 GB Online
USB Information: ℹ️
Apple Inc. FaceTime Camera (Built-in)
Apple Inc. Apple Internal Keyboard / Trackpad
Apple Inc. BRCM20702 Hub
Apple Inc. Bluetooth USB Host Controller
Thunderbolt Information: ℹ️
Apple Inc. thunderbolt_bus
Gatekeeper: ℹ️
Mac App Store and identified developers
Problem System Launch Agents: ℹ️
[failed] com.apple.CallHistoryPluginHelper.plist
[failed] com.apple.coreservices.appleid.authentication.plist
[failed] com.apple.icloud.fmfd.plist
Problem System Launch Daemons: ℹ️
[failed] com.apple.ctkd.plist
[failed] com.apple.nehelper.plist
[failed] com.apple.tccd.system.plist
[failed] com.apple.wdhelper.plist
Launch Agents: ℹ️
[running] com.kodak.BonjourAgent.plist Support
[running] com.trusteer.rapport.rapportd.plist Support
Launch Daemons: ℹ️
[loaded] com.adobe.fpsaud.plist Support
[loaded] com.microsoft.office.licensing.helper.plist Support
[running] com.trusteer.rooks.rooksd.plist Support
User Launch Agents: ℹ️
[loaded] com.kodak.KODAK AiO Annual Opt.plist Support
[loaded] com.kodak.KODAK AiO Firmware Updater.plist Support
[loaded] com.kodak.KODAK AiO Software Updater.plist Support
[running] com.kodak.StatisticCollection.plist Support
User Login Items: ℹ️
iTunesHelper Application (/Applications/iTunes.app/Contents/MacOS/iTunesHelper.app)
Internet Plug-ins: ℹ️
Flip4Mac WMV Plugin: Version: 3.2.0.16   - SDK 10.8 Support
FlashPlayer-10.6: Version: 15.0.0.189 - SDK 10.6 Support
QuickTime Plugin: Version: 7.7.3
NP_2020Player_IKEA: Version: 5.0.94.1 - SDK 10.6 Support
Flash Player: Version: 15.0.0.189 - SDK 10.6 Support
Default Browser: Version: 600 - SDK 10.10
SharePointBrowserPlugin: Version: 14.0.0 Support
JavaAppletPlugin: Version: 15.0.0 - SDK 10.10 Check version
Safari Extensions: ℹ️
Omnibar
3rd Party Preference Panes: ℹ️
Flash Player Support
Flip4Mac WMV Support
Trusteer Endpoint Protection Support
Time Machine: ℹ️
Time Machine not configured!
Top Processes by CPU: ℹ️
      11% mds
      6% WindowServer
      1% loginwindow
      0% hidd
      0% fontd
Top Processes by Memory: ℹ️
281 MB com.apple.WebKit.WebContent
86 MB Safari
41 MB WindowServer
34 MB rapportd
28 MB mds
Virtual Memory Information: ℹ️
51 MB Free RAM
523 MB Active RAM
469 MB Inactive RAM
792 MB Wired RAM
5.75 GB Page-ins
570 MB Page-outs

If push comes to shove, create a bootable flash drive and completely wipe you hard disk and reinstall os x. But that means starting fresh, so save pictures and important files to a flash drive.

Why is Firefox 6.0.2 really slow compared to previous Firefox versions?

Similar Messages

Maybe you are looking for