Why is the https protocol used on all pages of arch wiki & forums ?
I don't know if it's true, but I heard that the https protocol requires more server resources than http, maybe because the server has to encrypt the data before sending it to the client. Therefore, as far as I know, https is usually used only on web pages containing login forms, and others that transmit sensitive data. I'm not complaining about the wiki or forum performance, they're loading fast, but is there a reason for using https on all pages of arch wiki and arch forums ? Shouldn't https be used only for logins to the wiki and forums, and http for all other pages, just like archlinux home page ?
Last edited by Chrys349 (2011-10-14 00:14:54)
I don't know the specific reasons as far as Arch is concerned, but there is a trend... See for example the HTTPS Everywhere extension. Many sites started offering or forcing https (including Google.) This can help avoid censorship and eavesdropping, two things that are on the rise too in many countries.
Similar Messages
-
Why must the number of states on all pages be equal?
Hi,
I'm building a complete interactive website in Fireworks CS5 using Master Pages, States and Behaviors for some neat interactivity on the mockup.
My question is why must the number of states be equal on all pages? I have a Master Page with a simple rollover effect on all the links, but on the Profile page I have a popup where you can insert tags. To create an interactive popup on the Profile page I need a couple of states for that popup on the Profile page. As soon as I add more states to the Profile page it loses the content from the Master Page, even if I tell all the layers in the Master page to "share on all states", when forcing the Profile page get's disconnected from the Master page.
There has to be a simpler way of doing this!
Thanks!There is no way of doing what you want in Fireworks. It's not an HTML editor and can't generate more than rudimentary interactive objects. To create more sophisticated interactive objects you need have some knowledge of coding and use software like Dreamweaver or Flash.
-
Web Proxying to a WebLogic Cluster using the HTTPS protocol
Hi all,
I am recently involved into JWS proxying to WebLogic Cluster.
I don't have any technical problems at the moment but "conceptual" problems, that is:
- my jws proxy server should connect to a WebLogic Cluster through a Bea plugin configured wish SSL parameters;
- my jws proxy server should pass the incoming request using a load-balancing algorithm among the two nodes of the cluster, that are actually installed on two different machines;
- the jws proxy server doesn't seem to accept multiple certificates.
My question is: how can I configure my proxy plugin to route the incoming requests to my WebLogic Cluster using the https protocol? As a matter of fact, each certificate should be hostname dependent, and it looks like that the proxy plugin doesn't accept a multiple certificate configuration (and it should actually match the CN entry in the certificates with the actual hostnames of the nodes).
Any hint?
Thx a lot,
LucaIt is supported in 5.2
- Prasad
Wei Guan wrote:
> As I knew of, secure proxying is not supported yet.
> --
> Cheers - Wei
> Bob Kiep <[email protected]> wrote in message
> news:8bvvc7$7uf$[email protected]..
> > The NSAPI plugin cannot perform SSL proxying, as documented at the bottom
> of
> > this message (taken from
> > http://www.weblogic.com/docs/admindocs/nsapi.html#background). When
> > Weblogic is the proxy, can I do SSL? If someone could send me the link to
> > where is states whether is SSL or not would be very helpful.
> >
> > "The plug-in is for an environment where NES serves static pages, and a
> > Weblogic Server (operating in a different process, possibly on a different
> > host) is delegated to serve dynamic pages (such as JSPs or pages generated
> > by HTTP Servlets). The connection between WebLogic Server and the NSAPI
> > plug-in is clear text http, not SSL. To the end user -- the browser -- the
> > HTTP requests delegated to WebLogic appear to come from the same source as
> > the static pages. In other words, WebLogic on the back-end is invisible.
> > Additionally, the HTTP-tunneling facility of the WebLogic client-server
> > protocol can operate through the plug-in, providing access to all WebLogic
> > services (not just dynamic pages). "
> >
> >
Cheers
- Prasad
-
What is the condition for using 'for all entries' and why?
what is the condition for using 'for all entries' and why? can any body tell the reason for this ? its a big favour of me .
regards,
ravi.hi,
for all entries is used to join two or more tables.
It is same as join but performance wise for all entries is more effective.
You can only use FOR ALL ENTRIES IN ...WHERE ...in a SELECT statement.
SELECT ... FOR ALL ENTRIES IN itab WHERE cond returns the union of the solution sets of all SELECT
statements that would result if you wrote a separate statement for each line of the internal table replacing the symbol
itab-f with the corresponding value of component f in the WHERE condition.Duplicates are discarded from the result
set. If the internal table itab does not contain any entries, the system treats the statement as though there were
no WHERE cond condition, and selects all records (in the current client).
for example:
SELECT * FROM sflight INTO wa_sflight
FOR ALL ENTRIES IN ftab
WHERE CARRID = ftab-carrid AND
CONNID = ftab-connid AND
fldate = '20010228'.
this condition, return all entries of the sflight
hen using FOR ALL ENTRIES the number of matching records is restricted to the number of records in the internal table. If the number of records in the database tables is too large then join would cause overheads in performance. Additionally a JOIN bypasses the table buffering.
So for all entries is used for filtering out the data from the two tables based on the entries in them.
Advantages:
1) For all entries avoids inner join & so the performance increases.
2) For specified values in 1 itab, if you to fetch values from other table you can use it.
3) Use of select stmt in loop is gets avoided, as u can use read statement on the the new itab. -
HTML 5 and the use of the HTTP protocol.
In our company we upgraded to fms 4 and installed the apache that comes bundle up with the installation. We had it configure and now we can play videos in html 5 by using the http protocol. The question I have is, can we use https protocol instead of rtmps? I've been doing a lot of research and I found documentation that says to put a minus sign in front of port 443 (-443) in the fms.ini file in the ADAPTOR.HOSTPORT line but it also says that with this configuration port 443 will only recieve rtmps connections. My next step is to put the minus sign in front of the port number and restart the server and just try to establish connection using https to see if i works. Any ideas are definetly welcome.
Hi,
It is possible to serve the content via the Apache that bundles with the FMS.
For that you need to eneble mos_ssl.so module in httpd.conf and create a virtual host and give appropriate parameters ( refer any document for ssl configuration in apache ). Also make sure that the 443 port is not used by any other service (eg : RTMPS ).
Thanks. -
HTTP PROTOCOL used in XI by default
Hi All,
I exported a wsdl file from XI and I want to use that wsdl to invoke the service in XI.
I am using xml spy to test that wsdl.When I run it, it prompts me to enter user id & password & i do the same. The service gets executed.But now i am writing my own client program in axis..so how should i set authentication information.Do i need to set something in the wsdl in XI so that i will be able to set the authentication info.
Can you tell me what is the default http protocol used by XI??
Thanks,
ArchanaHI,
You have to enter the User,pwd.
See this link also.
/people/siva.maranani/blog/2005/03/01/testing-xi-exposed-web-services
Regards
Chilla.. -
Why is the Star Transformation using two indexes for the same dimension?
Hi,
Recently, I have made an investigation about the Star Transformation feature. I have found a strange test case, which plays an important role in my strategy for our overall DWH architecture. Here it is:
The Strategy:
I would like to have the classical Star Transformation approach (single column Bitmap Indexes for each dimension foreign key column in the fact table), together with additional Bitmap Join Indexes for some of the dimension attributes, which would benefit from the materialization of the join (bitmap merge operation will be skipped/optimized).
The query:
select dp.brand, ds. region_name, dc.region_name
, count(*), sum(f.extended_price)
from fact_line_item f
, dim_part dp
, dim_supplier ds
, dim_customer dc
where dp.mfgr = 10 -- dimension selectivity = 1/10 --> acttual/fact selectivity = 6/10
and f.part_dk = dp.dk
and ds.region_name = 'REGION #1' -- dimension selectivity = 1/9
and f.supplier_dk = ds.dk
and dc.region_name = 'REGION #1' -- dimension selectivity = 1/11
and f.customer_dk = dc.dk
group by dp.brand, ds. region_name, dc.region_name
The actual plan:
| Id | Operation | Name | Starts | E-Rows | Cost (%CPU)| A-Rows | A-Time | Buffers | Reads |
| 0 | SELECT STATEMENT | | 1 | | 3247 (100)| 1 |00:01:42.05 | 264K| 220K|
| 1 | HASH GROUP BY | | 1 | 2 | 3247 (1)| 1 |00:01:42.05 | 264K| 220K|
|* 2 | HASH JOIN | | 1 | 33242 | 3037 (1)| 217K|00:01:29.67 | 264K| 220K|
|* 3 | TABLE ACCESS FULL | DIM_SUPPLIER | 1 | 1112 | 102 (0)| 1112 |00:00:00.01 | 316 | 4 |
|* 4 | HASH JOIN | | 1 | 33245 | 2934 (1)| 217K|00:01:29.10 | 264K| 220K|
|* 5 | TABLE ACCESS FULL | DIM_CUSTOMER | 1 | 910 | 102 (0)| 910 |00:00:00.08 | 316 | 8 |
|* 6 | HASH JOIN | | 1 | 33248 | 2831 (1)| 217K|00:01:28.57 | 264K| 220K|
|* 7 | TABLE ACCESS FULL | DIM_PART | 1 | 10 | 3 (0)| 10 |00:00:00.01 | 6 | 0 |
| 8 | PARTITION RANGE ALL | | 1 | 36211 | 2827 (1)| 217K|00:01:28.01 | 264K| 220K|
| 9 | TABLE ACCESS BY LOCAL INDEX ROWID| FACT_LINE_ITEM | 6 | 36211 | 2827 (1)| 217K|00:01:33.85 | 264K| 220K|
| 10 | BITMAP CONVERSION TO ROWIDS | | 6 | | | 217K|00:00:07.09 | 46980 | 3292 |
| 11 | BITMAP AND | | 6 | | | 69 |00:00:08.33 | 46980 | 3292 |
| 12 | BITMAP MERGE | | 6 | | | 193 |00:00:02.09 | 2408 | 1795 |
| 13 | BITMAP KEY ITERATION | | 6 | | | 4330 |00:00:04.66 | 2408 | 1795 |
| 14 | BUFFER SORT | | 6 | | | 60 |00:00:00.01 | 6 | 0 |
|* 15 | TABLE ACCESS FULL | DIM_PART | 1 | 10 | 3 (0)| 10 |00:00:00.01 | 6 | 0 |
|* 16 | BITMAP INDEX RANGE SCAN | FACT_LI__P_PART_DIM_KEY_BIX | 60 | | | 4330 |00:00:02.11 | 2402 | 1795 |
|* 17 | BITMAP INDEX SINGLE VALUE | FACT_LI__P_PART_MFGR_BJX | 6 | | | 1747 |00:00:06.65 | 890 | 888 |
| 18 | BITMAP MERGE | | 6 | | | 169 |00:00:02.78 | 16695 | 237 |
| 19 | BITMAP KEY ITERATION | | 6 | | | 5460 |00:00:01.56 | 16695 | 237 |
| 20 | BUFFER SORT | | 6 | | | 5460 |00:00:00.02 | 316 | 0 |
|* 21 | TABLE ACCESS FULL | DIM_CUSTOMER | 1 | 910 | 102 (0)| 910 |00:00:00.01 | 316 | 0 |
|* 22 | BITMAP INDEX RANGE SCAN | FACT_LI__P_CUST_DIM_KEY_BIX | 5460 | | | 5460 |00:00:02.07 | 16379 | 237 |
| 23 | BITMAP MERGE | | 6 | | | 170 |00:00:03.65 | 26987 | 372 |
| 24 | BITMAP KEY ITERATION | | 6 | | | 6672 |00:00:02.23 | 26987 | 372 |
| 25 | BUFFER SORT | | 6 | | | 6672 |00:00:00.01 | 316 | 0 |
|* 26 | TABLE ACCESS FULL | DIM_SUPPLIER | 1 | 1112 | 102 (0)| 1112 |00:00:00.01 | 316 | 0 |
|* 27 | BITMAP INDEX RANGE SCAN | FACT_LI__S_SUPP_DIM_KEY_BIX | 6672 | | | 6672 |00:00:02.74 | 26671 | 372 |
The Question:
Why is the Star Transformation using both indexes FACT_LI__P_PART_DIM_KEY_BIX and FACT_LI__P_PART_MFGR_BJX for the same dimension criteria (dp.mfgr = 10)?? The introduction of the additional Bitmap Join Index actually make Oracle to do the work twice !!!
Anybody, any idea ?!?Dom, here it is the plan with the predicates:
| Id | Operation | Name | Starts | E-Rows | Cost (%CPU)| A-Rows | A-Time | Buffers | Reads |
| 0 | SELECT STATEMENT | | 1 | | 3638 (100)| 1 |00:06:41.17 | 445K| 236K|
| 1 | HASH GROUP BY | | 1 | 2 | 3638 (1)| 1 |00:06:41.17 | 445K| 236K|
|* 2 | HASH JOIN | | 1 | 33242 | 3429 (1)| 217K|00:08:18.02 | 445K| 236K|
|* 3 | TABLE ACCESS FULL | DIM_SUPPLIER | 1 | 1112 | 102 (0)| 1112 |00:00:00.03 | 319 | 313 |
|* 4 | HASH JOIN | | 1 | 33245 | 3326 (1)| 217K|00:08:17.47 | 445K| 236K|
|* 5 | TABLE ACCESS FULL | DIM_CUSTOMER | 1 | 910 | 102 (0)| 910 |00:00:00.01 | 319 | 313 |
|* 6 | HASH JOIN | | 1 | 33248 | 3223 (1)| 217K|00:08:16.63 | 445K| 236K|
|* 7 | TABLE ACCESS FULL | DIM_PART | 1 | 10 | 3 (0)| 10 |00:00:00.01 | 6 | 0 |
| 8 | PARTITION RANGE ALL | | 1 | 36211 | 3219 (1)| 217K|00:08:16.30 | 445K| 236K|
| 9 | TABLE ACCESS BY LOCAL INDEX ROWID| FACT_LINE_ITEM | 6 | 36211 | 3219 (1)| 217K|00:08:40.89 | 445K| 236K|
| 10 | BITMAP CONVERSION TO ROWIDS | | 6 | | | 217K|00:00:32.00 | 46919 | 19331 |
| 11 | BITMAP AND | | 6 | | | 69 |00:00:34.50 | 46919 | 19331 |
| 12 | BITMAP MERGE | | 6 | | | 193 |00:00:00.58 | 2353 | 1 |
| 13 | BITMAP KEY ITERATION | | 6 | | | 4330 |00:00:00.10 | 2353 | 1 |
| 14 | BUFFER SORT | | 6 | | | 60 |00:00:00.01 | 6 | 0 |
|* 15 | TABLE ACCESS FULL | DIM_PART | 1 | 10 | 3 (0)| 10 |00:00:00.01 | 6 | 0 |
|* 16 | BITMAP INDEX RANGE SCAN | FACT_LI__P_PART_DIM_KEY_BIX | 60 | | | 4330 |00:00:00.07 | 2347 | 1 |
|* 17 | BITMAP INDEX SINGLE VALUE | FACT_LI__P_PART_MFGR_BJX | 6 | | | 1747 |00:01:23.64 | 882 | 565 |
| 18 | BITMAP MERGE | | 6 | | | 169 |00:00:09.14 | 16697 | 7628 |
| 19 | BITMAP KEY ITERATION | | 6 | | | 5460 |00:00:02.19 | 16697 | 7628 |
| 20 | BUFFER SORT | | 6 | | | 5460 |00:00:00.01 | 316 | 0 |
|* 21 | TABLE ACCESS FULL | DIM_CUSTOMER | 1 | 910 | 102 (0)| 910 |00:00:00.01 | 316 | 0 |
|* 22 | BITMAP INDEX RANGE SCAN | FACT_LI__P_CUST_DIM_KEY_BIX | 5460 | | | 5460 |00:00:08.78 | 16381 | 7628 |
| 23 | BITMAP MERGE | | 6 | | | 170 |00:00:21.46 | 26987 | 11137 |
| 24 | BITMAP KEY ITERATION | | 6 | | | 6672 |00:00:10.29 | 26987 | 11137 |
| 25 | BUFFER SORT | | 6 | | | 6672 |00:00:00.01 | 316 | 0 |
|* 26 | TABLE ACCESS FULL | DIM_SUPPLIER | 1 | 1112 | 102 (0)| 1112 |00:00:00.01 | 316 | 0 |
|* 27 | BITMAP INDEX RANGE SCAN | FACT_LI__S_SUPP_DIM_KEY_BIX | 6672 | | | 6672 |00:00:20.94 | 26671 | 11137 |
Predicate Information (identified by operation id):
2 - access("F"."SUPPLIER_DK"="DS"."DK")
3 - filter("DS"."REGION_NAME"='REGION #1')
4 - access("F"."CUSTOMER_DK"="DC"."DK")
5 - filter("DC"."REGION_NAME"='REGION #1')
6 - access("F"."PART_DK"="DP"."DK")
7 - filter("DP"."MFGR"=10)
15 - filter("DP"."MFGR"=10)
16 - access("F"."PART_DK"="DP"."DK")
17 - access("F"."SYS_NC00017$"=10)
21 - filter("DC"."REGION_NAME"='REGION #1')
22 - access("F"."CUSTOMER_DK"="DC"."DK")
26 - filter("DS"."REGION_NAME"='REGION #1')
27 - access("F"."SUPPLIER_DK"="DS"."DK")
Note
- star transformation used for this statement -
Why is the iPhone 5 using so much data I have read a lot of complaints and I have went over on my plan and never have?
I have even turned off LTE. Cut off my cellular data off of apps. Still uses data I switched back to my iPhone 4 cause I had used my
Data in 2 weeks!I have the same problem on my 4S 64G: I updated to 7.1.1 and burned through my cellular data allowance without running anything that ought to be using it. I incurred an overage charge on Thursday, my new billing cycle started on Friday, and I immediately had used 3/4 of my allowance for the new cycle. I typically do not use my allowance in an entire month so burning through it in a day or two twice in one week is very much not right.
Possibly unrelated or not: last night I was out, did NOT use any apps that should use cellular data, and came home and my phone refused to connect to my home wifi despite turning this and that on and off. I burned cellular allowance while wifi was available.
It seems like someting on my phone, whether an app or the iOS itself, is using cellular data even while my phone is not in use. All I could do is turn off Cellular Data in Settings but that very much diminishes the usefulness of a phone that has served me well -- without data overages! -- for several years.
Please fix this, Apple! -
Why remove the single most used item, the addons bar?
Why does their v29 change log says "added options", when the only thing most of us see are removed options, including the single most used section: the addon bar? I do not want to install an addon to see the addon bar that has been present since pre-Firefox Mozilla days. So why remove the single most used item? Did the previous pro-life CEO like it too much and the new management cannot have that?? Seems like Firefox is going backwards, not forwards.
With 20 years in tech support and working on thousands of user end computers, the number 1 area used by people both in offices and in their personal computers was the add on bar. Considering the sheer number of addons that make use of it (just a preliminary dig through the addons earlier today), I would say in excess of 75% of legitimate addons make use of it. By removing it, it essentially nullifies hundreds of thousands of man hours put into programming all those addons.
Why require an addon just to be able to make use of other addons? Sounds like a VERY flawed study to me, or there was no study and it's just Mozilla big wigs deciding to change what they want, spitting in the face of the open source/common community licensing. -
HTTP Error 405 - The HTTP verb used to access this page is not .....
Goodmorning,
I've installed BO XI R3 SP4 on a 2k3-server with IIS 6.0. I wanted to configurate the SSO. After changing the web.config file and restart of the IIS , I get the following error :
HTTP Error 405 - The HTTP verb used to access this page is not allowed.
Internet Information Services (IIS)
The frame where you normally are using for authentication has this error, the frame around is normal.
Hope someony can help, thx in advanceI can't fin a upload button , so the file in plain text gepasted
Hope it is readable :
#Software: Microsoft Internet Information Services 6.0
#Version: 1.0
#Date: 2012-02-29 12:19:21
#Fields: date time s-sitename s-ip cs-method cs-uri-stem cs-uri-query s-port cs-username c-ip cs(User-Agent) sc-status sc-substatus sc-win32-status
2012-02-29 12:19:21 W3SVC1 10.13.0.119 GET /InfoViewApp/logon.aspx - 80 - 10.13.0.119 Mozilla/4.0(compatible;MSIE7.0;WindowsNT5.2;Trident/4.0;.NETCLR1.1.4322;.NETCLR2.0.50727;.NETCLR3.0.4506.2152;.NETCLR+3.5.30729) 200 0 0
2012-02-29 12:19:21 W3SVC1 10.13.0.119 GET /InfoViewApp/res/schema.blue/default.css.ashx - 80 - 10.13.0.119 Mozilla/4.0(compatible;MSIE7.0;WindowsNT5.2;Trident/4.0;.NETCLR1.1.4322;.NETCLR2.0.50727;.NETCLR3.0.4506.2152;.NETCLR+3.5.30729) 200 0 0
2012-02-29 12:19:21 W3SVC1 10.13.0.119 GET /InfoViewApp/js/utils.js.ashx - 80 - 10.13.0.119 Mozilla/4.0(compatible;MSIE7.0;WindowsNT5.2;Trident/4.0;.NETCLR1.1.4322;.NETCLR2.0.50727;.NETCLR3.0.4506.2152;.NETCLR+3.5.30729) 200 0 0
2012-02-29 12:19:21 W3SVC1 10.13.0.119 GET /InfoViewApp/js/helpSystem.js.ashx - 80 - 10.13.0.119 Mozilla/4.0(compatible;MSIE7.0;WindowsNT5.2;Trident/4.0;.NETCLR1.1.4322;.NETCLR2.0.50727;.NETCLR3.0.4506.2152;.NETCLR+3.5.30729) 200 0 0
2012-02-29 12:19:21 W3SVC1 10.13.0.119 GET /InfoViewApp/common/appService.aspx service=skinning&resource=img&img=img.banner.logon.pattern 80 - 10.13.0.119 Mozilla/4.0(compatible;MSIE7.0;WindowsNT5.2;Trident/4.0;.NETCLR1.1.4322;.NETCLR2.0.50727;.NETCLR3.0.4506.2152;.NETCLR+3.5.30729) 200 0 0
2012-02-29 12:19:21 W3SVC1 10.13.0.119 GET /InfoViewApp/listing/blank.aspx - 80 - 10.13.0.119 Mozilla/4.0(compatible;MSIE7.0;WindowsNT5.2;Trident/4.0;.NETCLR1.1.4322;.NETCLR2.0.50727;.NETCLR3.0.4506.2152;.NETCLR+3.5.30729) 200 0 0
2012-02-29 12:19:21 W3SVC1 10.13.0.119 GET /InfoViewApp/common/appService.aspx service=skinning&resource=img&img=img.banner.logo 80 - 10.13.0.119 Mozilla/4.0(compatible;MSIE7.0;WindowsNT5.2;Trident/4.0;.NETCLR1.1.4322;.NETCLR2.0.50727;.NETCLR3.0.4506.2152;.NETCLR+3.5.30729) 200 0 0
2012-02-29 12:19:21 W3SVC1 10.13.0.119 GET /InfoViewApp/logon/logon.aspx parameter=logonService 80 - 10.13.0.119 Mozilla/4.0(compatible;MSIE7.0;WindowsNT5.2;Trident/4.0;.NETCLR1.1.4322;.NETCLR2.0.50727;.NETCLR3.0.4506.2152;.NETCLR+3.5.30729) 200 0 0
2012-02-29 12:19:21 W3SVC1 10.13.0.119 POST /PlatformServices/Shared/Logon/Logon.aspx - 80 - 10.13.0.119 Mozilla/4.0(compatible;MSIE7.0;WindowsNT5.2;Trident/4.0;.NETCLR1.1.4322;.NETCLR2.0.50727;.NETCLR3.0.4506.2152;.NETCLR+3.5.30729) 405 0 1
2012-02-29 12:32:05 W3SVC1 127.0.0.1 GET /InfoViewApp/logon.aspx - 80 - 127.0.0.1 Mozilla/4.0(compatible;MSIE8.0;WindowsNT5.2;Trident/4.0;.NETCLR1.1.4322;.NETCLR2.0.50727;.NETCLR3.0.4506.2152;.NETCLR+3.5.30729) 200 0 0
2012-02-29 12:32:05 W3SVC1 127.0.0.1 GET /InfoViewApp/res/schema.blue/default.css.ashx - 80 - 127.0.0.1 Mozilla/4.0(compatible;MSIE8.0;WindowsNT5.2;Trident/4.0;.NETCLR1.1.4322;.NETCLR2.0.50727;.NETCLR3.0.4506.2152;.NETCLR+3.5.30729) 200 0 0
2012-02-29 12:32:05 W3SVC1 127.0.0.1 GET /InfoViewApp/js/utils.js.ashx - 80 - 127.0.0.1 Mozilla/4.0(compatible;MSIE8.0;WindowsNT5.2;Trident/4.0;.NETCLR1.1.4322;.NETCLR2.0.50727;.NETCLR3.0.4506.2152;.NETCLR+3.5.30729) 200 0 0
2012-02-29 12:32:05 W3SVC1 127.0.0.1 GET /InfoViewApp/js/helpSystem.js.ashx - 80 - 127.0.0.1 Mozilla/4.0(compatible;MSIE8.0;WindowsNT5.2;Trident/4.0;.NETCLR1.1.4322;.NETCLR2.0.50727;.NETCLR3.0.4506.2152;.NETCLR+3.5.30729) 200 0 0
2012-02-29 12:32:05 W3SVC1 127.0.0.1 GET /InfoViewApp/listing/blank.aspx - 80 - 127.0.0.1 Mozilla/4.0(compatible;MSIE8.0;WindowsNT5.2;Trident/4.0;.NETCLR1.1.4322;.NETCLR2.0.50727;.NETCLR3.0.4506.2152;.NETCLR+3.5.30729) 200 0 0
2012-02-29 12:32:05 W3SVC1 127.0.0.1 GET /InfoViewApp/common/appService.aspx service=skinning&resource=img&img=img.banner.logon.pattern 80 - 127.0.0.1 Mozilla/4.0(compatible;MSIE8.0;WindowsNT5.2;Trident/4.0;.NETCLR1.1.4322;.NETCLR2.0.50727;.NETCLR3.0.4506.2152;.NETCLR+3.5.30729) 200 0 0
2012-02-29 12:32:05 W3SVC1 127.0.0.1 GET /InfoViewApp/common/appService.aspx service=skinning&resource=img&img=img.banner.logo 80 - 127.0.0.1 Mozilla/4.0(compatible;MSIE8.0;WindowsNT5.2;Trident/4.0;.NETCLR1.1.4322;.NETCLR2.0.50727;.NETCLR3.0.4506.2152;.NETCLR+3.5.30729) 200 0 0
2012-02-29 12:32:05 W3SVC1 127.0.0.1 GET /InfoViewApp/logon/logon.aspx parameter=logonService 80 - 127.0.0.1 Mozilla/4.0(compatible;MSIE8.0;WindowsNT5.2;Trident/4.0;.NETCLR1.1.4322;.NETCLR2.0.50727;.NETCLR3.0.4506.2152;.NETCLR+3.5.30729) 200 0 0
2012-02-29 12:32:05 W3SVC1 127.0.0.1 POST /PlatformServices/Shared/Logon/Logon.aspx - 80 - 127.0.0.1 Mozilla/4.0(compatible;MSIE8.0;WindowsNT5.2;Trident/4.0;.NETCLR1.1.4322;.NETCLR2.0.50727;.NETCLR3.0.4506.2152;.NETCLR+3.5.30729) 405 0 1
2012-02-29 12:33:17 W3SVC1 10.13.0.119 OPTIONS /c$ - 80 - 10.13.8.13 Microsoft-WebDAV-MiniRedir/6.1.7601 200 0 0
2012-02-29 12:33:17 W3SVC1 10.13.0.119 PROPFIND /c$ - 80 - 10.13.8.13 Microsoft-WebDAV-MiniRedir/6.1.7601 501 0 0
2012-02-29 12:33:17 W3SVC1 10.13.0.119 PROPFIND /c$ - 80 - 10.13.8.13 Microsoft-WebDAV-MiniRedir/6.1.7601 501 0 0
2012-02-29 12:33:17 W3SVC1 10.13.0.119 PROPFIND /c$ - 80 - 10.13.8.13 Microsoft-WebDAV-MiniRedir/6.1.7601 501 0 0
2012-02-29 12:33:17 W3SVC1 10.13.0.119 PROPFIND /c$ - 80 - 10.13.8.13 Microsoft-WebDAV-MiniRedir/6.1.7601 501 0 0
Thx in advance for your reply -
How can i write the below code using "For all entries"
Hi
How can we write the below code using "for all entries" and need to avoid joins...
Please help
SELECT aaufnr aobjnr aauart atxjcd a~pspel
agstrp awerks carbpl cwerks
INTO TABLE t_caufv
FROM caufv AS a
INNER JOIN afih AS b
ON aaufnr = baufnr
INNER JOIN crhd AS c
ON bgewrk = cobjid
AND c~objty = 'D'
WHERE ( a~pspel = space
OR a~txjcd = space
OR NOT a~objnr IN
( select OBJNR from COBRB AS e
WHERE objnr = a~objnr ) )
AND a~werks IN s_plant
AND a~auart IN s_wtype
AND NOT a~objnr IN
( select OBJNR from JEST AS d
WHERE objnr = a~objnr
AND ( dstat = 'A0081'OR dstat = 'A0018' )
AND d~inact 'X' ).
Reward points for all helpfull answers
Thanks
Ammi.Hi,
SELECT objnr objid aufnr
from afih
into table t_afih.
SELECT objnr
from JEST
into table t_JEST
where stat = 'A0045'
OR stat = 'A0046'
AND inact 'X'.
SELECT objnr
from COBRB
into table t_cobrb.
SELECT arbpl werks objid objty
from crhd
INTO table it_crhd
FOR ALL ENTRIES IN it_afih
WHERE objty eq 'D'
AND gewrk = it_afih-objid.
SELECT aufnr objnr auart txjcd pspel gstrp werks aufnr
FROM caufv
INTO table t_caufv
FOR ALL ENTRIES IN it_afih
WHERE aufnr = it_afih-aufnr
And pspel = ' '
AND txjcd = ' '
ANd objnr ne it_crhd-objnr
AND auart in s_wtype
AND werks in s_plant.
AND objnr ne it_jest-objnr.
dont use NE in the select statements, it may effect performance also. Instead use if statements inside
loops.
loop at t_caufv.
read table it_chrd............
if t_caufv-objnr ne it_chrd-objnr.
read table it_jest..........
if if t_caufv-objnr ne it_jest-objnr.
(proceed further).
endif.
endif.
endloop.
hope this helps.
Reward if useful.
Regards,
Anu -
Why does the Java API use int instead of short or byte?
Why does the Java API use int if short or even byte would be sufficient?
Example: The DAY_OF_WEEK field in Calendar uses int.One of the point is, on the benchmark tests on Java performance, int does far better than short and byte data types.
Please follow the below blog talks about the same.
Java Primative Speed
-K -
Using ipone4s, since update to IOS6 I cannot use "search" in the App Store. I deleted an App because I was have trouble activating certain features since the update to IOS6 - only to find now I cannot download the App to use AT ALL. ???????
Anything* >.<
-
Why did the app store make me purchase Pages again? I already bought Pages, Numbers and Keynote for my Ipad and want to download them onto my Mac Book and they aren't in the purchases tab. I thought I would try clicking on the buy button for Pages, thinking, it would say I already purchased this app, but it didn't. Where are all my purchases? I used the same Apple ID I use for all my Apple devices. Help! I really don't want to buy them all again.
The version of Pages, Keynote and Numbers for the Mac will be different than the iOS version and will require a separate purchase.
-
Can I import HTMLs from inside the project and use as portlet page ?
As you know, I am using Java Studio Creator 2 Update 1 for my current portal project. I have created JSR-168 JSF Portlet Project for my portlet development.
As I have some html pages ready for my development,
Can I import HTMLs from inside the project and use as portlet page for my project?
I did the followings steps:
1: In side the project - File -> Add Existing Item -> Web Page ( imported test.html page from my local folder)
2: Let it convert some of the tags for me ( so now it becomes - �test.jsp� )
3: Set it to initial view.
4. A default portlet page � newPortletPage.jsp is still there with no initial view.
Now after doing this, No Visual Designer and Properties window available to for that �test.jsp� page. Though it allowed me to �build� the project successfully.
When I build and run the portlet application, got the error message �Error occurred in portlet!� on Pluto Portal. Please advice.You do not open fcpproject files. You don't double click or anything else. The files have to be in the correct folder structure in the Final Cut Projects folder and the application opens them automatically. Can you post screen shots of the Final Cut Projects folder and its location.
Maybe you are looking for
-
Posting Unplanned Depreciation (ABAA)
Hi, Need your help. Am doing a posting for Unplanned Dep. using tcode ABAA for the amount of 205,877.40 for April 2007, but i hit an error msg AA 649 "In area 01, you can only post manual dep. up to the amount 196,410.75. I've checked the asset valu
-
Itunes will not recognize my ipod touch but windows does
I use windows 7 and everything was fine until I updated to the most recent version of Itunes 10. something. Now when I plug in my Ipod windows recognizes it but I get this message from Itunes: iTunes could not connect to this iPod because an unknown
-
Hello everyone, I am a beginner to mac programming. question 1. I created an application for qt and I would like to create an installer for mac where the installer is able to create a file association with a specific filename extension. question 2. I
-
Hard drive for G4 now, Mac Pro later
I have an early G4 400 MHz (AGP graphics). I want to install an ATA drive in Position 3. In about a year I will buy a MacPro tower and want to move that hard drive from the G4 to the Mac Pro. So I am looking for a hard drive that will fit both comput
-
My events just show up as a dot on the calendar - can I get them to show under the calendar?
New to iphone Calendar! After syncing events, they just show up as dots on the calendar - is there a way to have each months events listed under the calendar month they're scheduled for?