Why is the LCMCLI ignoring my use of the "-includeSecurity=true' parameter?

I'm using the LCM Command Line Interface (LCMCLI) to promote content (e.g., AOLAP reports, Webi reports, etc.) between CMS environments.
The objects' User Security includes the BI Platform's built-in groups as well as mapped Active Directory groups. The same mapped Active Directory groups are already present on both environments.
I'm including the "-includeSecurity=true' flag in the LCMCLI syntax; when I execute the command, however, the object's user security from the source environment is not being applied to the object in the destination environment. Instead, the resulting object is simply inheriting the user security of the destination folder.
For each group, the console log displays "Status -> Resolution Status=Dropped, Dependency Status=All the required dependencies are included., Commit Status=Commit is not required., Promotion Status=No errors detected". The final part of the log displays "EXIT_SUCCESS". Yet the User Security is not being applied to the object.
Is this a known issue?

Troubleshooting Wi-Fi issues

Similar Messages

After updating to iTunes 5, I got an error message said the iPhone cannot be used because the Apple Moble Device service is not started. Any idea why and how to fix this? Thanks!

After updating to iTunes 5, I got an error message said the iPhone cannot be used because the Apple Moble Device service is not started. Any idea why and how to fix this? Thanks!

Please follow this article:
http://support.apple.com/kb/TS1567
it should help
let me know

How do I dispute a copyright claim against a video i made using a trailer in iMovie? The only content I used was the video I shot of friends daughter on a merry-go-round.IMovie had the music etc that I used.

How do I dispute a copyright claim against a video i made using a trailer in iMovie? The only content I used was the video I shot of friends daughter on a merry-go-round.IMovie had the music etc that I used. Here's the message It gives a number of options to choose from if I want to dispute the claim but I don't know which one this would come under. Several obviously don't apply and of the ones left I don't know which content that is in IMovie that I use comes under. "This video is my original content and I own the rights to it" "I have a license or written permission of the property rights holder to use this material" "My use of the content meets the legal requirements for fair use of fair dealing under applicable copyright laws" or "The content is in the public domain or is not eligible for copright protection."

You want to use the "I have a license..." option, since clearly the music is not yours, but Apple has granted you a license.
For your license, see this document, section 2.M. http://images.apple.com/legal/sla/docs/iMovie.pdf
For more on this irritating problem and why it is so hard to solve, see this article. (It is a problem for Final Cut Pro users as well.)
http://www.larryjordan.biz/app_bin/wordpress/archives/1842

Installed 11 64 bit now get "The iPHone cannot be used because the required software is not installed. Run the iTunes installer to remove iTunes, then install the 64-bit version of iTunes."

Installed iTunes 11 64 bit now get "The iPhone cannot be used because the required software is not installed. Run the iTunes installer to remove iTunes, then install the 64-bit version of iTunes." Uninstalled and installed twice no help. windows 7 64 bit, iPhone 5 OS 5.1

Let's try a standalone Apple Mobile Device Support install. It still might not install, but fingers crossed any error messages will give us a better idea of the underlying cause of why it's not installing under normal conditions.
Download and save a copy of the iTunesSetup.exe (or iTunes64setup.exe) installer file to your hard drive:
http://www.apple.com/itunes/download/
Download and install the free trial version of WinRAR:
http://www.rarlab.com/
Right-click the iTunesSetup.exe (or iTunes64setup.exe), and select "Extract to iTunesSetup" (or "Extract to iTunes64Setup"). WinRAR will expand the contents of the file into a folder called "iTunesSetup" (or "iTunes64Setup").
Go into the folder and doubleclick the AppleMobileDeviceSupport.msi (or AppleMobileDeviceSupport64.msi) to do a standalone AMDS install.
(If it offers you the choice to remove or repair, choose "Remove", and if the uninstall goes through successfully, see if you can reinstall by doubleclicking the AppleMobileDeviceSupport.msi again.)
Does it install (or uninstall and then reinstall) properly for you?
If instead you get an error message during the install (or uninstall), let us know what it says. (Precise text, please.)

I am planning to buy ipad 2 wifi 3g verizon carrier, will be taking it to india need to know if the same can be used with the local providers there or would the ipad be locked and restricted only to verizon

I am planning to buy ipad 2 wifi 3g verizon carrier, will be taking it to india need to know if the same can be used with the local providers there or would the ipad be locked and restricted only to verizon

I'm fairly sure the Verizon CDMA iPad 2 had no GSM sim slot. So it won't work with any other carrier except Verizon.
As far as the AT&T version goes, it should technically work but will not support 4G/LTE cellular bands.
Given iPad 2's are no longer being sold, I doubt any that could be bought would have a warranty still. Or have at most very little of it left.
Why an iPad 2? its now 3 generations behind the current one.
Perhaps an iPad 4 would be a better choice.

I am trying to restore ipad from previous back up. it requests a password it is none of the passwords I have used in the last decade any ideas to get around this?

I am trying to restore my ipad from previous back up. itunes requests a password, it is none of the passwords I have used in the last decade any ideas to get around this?

The password would be either your iTunes ID password or your admin password for the Computer.
MJ

I have no idea whether there is a causal relationship but since moving to Lion and iCloud, my iMac has become so slow that I wind up having to crash and restart most of the time. This is true regardless of the app I am using at the time. The specs of th

I have no idea whether there is a causal relationship but since moving to Lion and iCloud, my iMac has become so unresponsive that I wind up having to crash and restart most of the time. This is true regardless of the app I am using at the time.
The specs of this iMac are:
iMac 27 inch, late 2009 model with a 3.0 GHz Intel Core 2 Duo with 4 Gig 1067 Mhz DDR3, using OSX Lion 10.7.4 (11E53)
I have Mackeeper installed and according to the scans I have run, everything is fine. No virus, no junk files . . . no problems at all . . .
Except that for all practical purposes, my computer isn't working.
I am nearly totally deaf and live in an isolated, rural area of NW Missouri and this computer is what I mainly rely on to contact friends, relatives and business associtates!
Any and all suggestions will be greatly appreciated!

First, back up all data immediately, as your boot drive may be failing.
If you have more than ten or so files or folders on your Desktop, move them, temporarily at least, somewhere else in your home folder.
If iCloud is enabled, disable it.
Disconnect all wired peripherals except keyboard, mouse, and monitor, if applicable. Launch the usual set of applications you use when you notice the problem.
Step 1
Launch the Activity Monitor application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ If you’re running Mac OS X 10.7 or later, open LaunchPad. Click Utilities, then Activity Monitor in the page that opens.
Select the CPU tab of the Activity Monitor window.
Select All Processes from the menu in the toolbar, if not already selected.
Click the heading of the % CPU column in the process table to sort the entries by CPU usage. You may have to click it twice to get the highest value at the top. What is it, and what is the process? Also post the values for % User, % System, and % Idle at the bottom of the window.
Select the System Memory tab. What values are shown in the bottom part of the window for Page outs and Swap used?
Step 2
You must be logged in as an administrator to carry out this step.
Launch the Console application in the same way as above. Make sure the title of the Console window is All Messages. If it isn't, select All Messages from the SYSTEM LOG QUERIES menu on the left.
Post the 50 or so most recent messages in the log — the text, please, not a screenshot.
Important: Some personal information, such as your name, may appear in the log. Edit it out before posting.

Is it possible to customize the halftone screen/angle used by the HP Laserjet 5000/5100

Hi
When sending an image to print on our 5000s and 5100s I'd like for the printer to apply a halftone screen of 85 (frequency) and 45 (angle). However, the driver properties only has two settings - Standard and Enhanced.
I took a look at the PPD and found the following:
*%=== Halftone Information =================
*ScreenFreq: "106.0"
*ScreenAngle: "45.0"
*ResScreenFreq 300dpi/300 dpi: "60.0"
*ResScreenAngle 300dpi/300 dpi: "45.0"
*ResScreenFreq 600dpi/600 dpi: "106.0"
*ResScreenAngle 600dpi/600 dpi: "45.0"
*ResScreenFreq 1200dpi/1200 dpi: "180.0"
*ResScreenAngle 1200dpi/1200 dpi: "45.0"
I had hoped that simply by changing the screen frequencies to "85.0" it would do the trick (since 85 does not appear to be outside of the printers' capability). However, it resulted in no changes to the prints. I know (or at least think) the changes were "seen" by the print driver because I changed some of the text that it uses in the property boxes of the print driver and those changes appeared (e.g. I changed "Standard" to "Standard 2" for one of the halftone descriptions).
My question is... can I customize the frequency/angle used or are these values fixed regardless of changes made to the PPD?
Thank you.
Mark

What was the answer to this excellent question, please?
Mark
Student
Posts: 1
Registered: 05-14-2009
0
Is it possible to customize the halftone screen/angle used by the HP Laserjet 5000/5100
Options
05-14-2009 06:56 AM
Hi
When sending an image to print on our 5000s and 5100s I'd like for the printer to apply a halftone screen of 85 (frequency) and 45 (angle). However, the driver properties only has two settings - Standard and Enhanced.
I took a look at the PPD and found the following:
*%=== Halftone Information =================
*ScreenFreq: "106.0"
*ScreenAngle: "45.0"
*ResScreenFreq 300dpi/300 dpi: "60.0"
*ResScreenAngle 300dpi/300 dpi: "45.0"
*ResScreenFreq 600dpi/600 dpi: "106.0"
*ResScreenAngle 600dpi/600 dpi: "45.0"
*ResScreenFreq 1200dpi/1200 dpi: "180.0"
*ResScreenAngle 1200dpi/1200 dpi: "45.0"
I had hoped that simply by changing the screen frequencies to "85.0" it would do the trick (since 85 does not appear to be outside of the printers' capability). However, it resulted in no changes to the prints. I know (or at least think) the changes were "seen" by the print driver because I changed some of the text that it uses in the property boxes of the print driver and those changes appeared (e.g. I changed "Standard" to "Standard 2" for one of the halftone descriptions).
My question is... can I customize the frequency/angle used or are these values fixed regardless of changes made to the PPD?
Thank you.

When I plug in my iPod, a little window pops up on iTunes stating that I cannot use the iPod cannot be used because the apple mobile device service is not started. What do I do?

When I plug in my iPod, a little window pops up on iTunes stating that I cannot use the iPod cannot be used because the apple mobile device service is not started. What do I do?

See Here...
AMDS for Mac > http://support.apple.com/kb/ht1747
AMDS for Windows > http://support.apple.com/kb/TS1567

When I try to sync by Ipad into my Itunes on my PC, I get the message on my PC "The Ipad cannot be used becaused the Apple Mobile Device service is not started". What do I need to do to get it started so I can sync my Ipad?

when I try to sync my Ipad into my Itunes on my PC (first time I have done this) , I get the message on my PC "The Ipad cannot be used because the APple Mobile Device service is not started". What do I need to do to get it started? I went into my account and there is no obvious way to get it started.

See Here
AMDS for Windows
http://support.apple.com/kb/TS1567

I want to sync my ipod with itunes but it says the ipod cannot be used because the required software is not installed. run the itunes installer to remove itunes, the reinstall itunes again. i have done as instructed few times but still persists.

i want to sync my ipod with itunes but it says the ipod cannot be used because the required software is not installed. run the itunes installer to remove itunes, the reinstall itunes again. i have done as instructed few times but still persists.

Success!
By completely removing all reference to apple or iTunes/iPod/ Safari etc from my computer, it has at last installed.

When opening a word document, I get this:The table of contents is empty because none of the paragraph styles selected in the Document Inspector are used in the document. Is there a way to solve this?

The table of contents is empty because none of the paragraph styles selected in the Document Inspector are used in the document.
The above is what I get when I open a word document. Is there a way to solve this?

Hmmm. Apply the styles?
Peter

My school has a website. The professor uploads files in Word. When I click on the link at home using Pages, the download window opens with nothing in it and Safari opens with a blank in the address book. What Could be wrong? Wrong set up?

My school has a website. The professor uploads files in Word. When I click on the link at home using Pages, the download window opens with nothing in it and Safari opens with a blank in the address book. What Could be wrong? Wrong set up?

Hi Jo,
If I'm interpreting this correctly, the Word file downloads correctly, but when you open it in Pages, the link(s) which your instructor has embedded in the Word file are not correctly translated into Pages.
If the link shows the actual address, you should be able to copy that and paste it into the location bar in Safari, press return, and get to the website that way.
An alternate route might be to download one of the open source Office applications, OpenOffice.org, LibreOffice, or NeoOffice. These are written to more closely emulate the behaviours of MS Word than Pages, and may provide better support for links embedded in Word files.
Regards,
Barry

An error occurred during the Network Policy Server use of the Extensible Authentication Protocol (EAP).

Hello everyone:
I know this question have been asked in these forums quite a few times. I apologize if it is a repeat telecast but I was not able to find a suitable solution pertaining to my problem.
I have a AP/SM setup that is configured to get EAP-PEAP authentication from Windows 2012 Server. I have setup everything and have verified that the EAP-PEAP authentication works fine on AP/SM by getting authentication from FreeRADIUS server. Now, when I try
to get authentication from Windows Server, I am getting a reject. The Event log shows this generic message:
Reason Code: 23
Reason:
An error occurred during the Network Policy Server use of the Extensible Authentication Protocol (EAP). Check EAP log files for EAP errors.
There is nothing in the EAP logs that is obvious too:
"USIL01PMPTST01","IAS",07/11/2014,11:59:44,1,"SANDBOX\test","SANDBOX\test",,,,,,"10.120.133.10",5,0,"10.120.133.10","Canopy_AP",,,18,,,,5,"PEAP_TEST",0,"311 1 10.120.133.1
07/11/2014 00:05:57 4927",,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,"PEAP_TEST_CONNECTION",1,,,,
"USIL01PMPTST01","IAS",07/11/2014,11:59:44,11,,"SANDBOX\test",,,,,,,,0,"10.120.133.10","Canopy_AP",,,,,,,5,"PEAP_TEST",0,"311 1 10.120.133.1 07/11/2014 00:05:57 4927",30,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,"PEAP_TEST_CONNECTION",1,,,,
"USIL01PMPTST01","IAS",07/11/2014,11:59:44,1,"SANDBOX\test","SANDBOX\test",,,,,,"10.120.133.10",5,0,"10.120.133.10","Canopy_AP",,,18,,,,5,"PEAP_TEST",0,"311 1 10.120.133.1
07/11/2014 00:05:57 4928",,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,"PEAP_TEST_CONNECTION",1,,,,
"USIL01PMPTST01","IAS",07/11/2014,11:59:44,11,,"SANDBOX\test",,,,,,,,0,"10.120.133.10","Canopy_AP",,,,,,,5,"PEAP_TEST",0,"311 1 10.120.133.1 07/11/2014 00:05:57 4928",30,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,"PEAP_TEST_CONNECTION",1,,,,
"USIL01PMPTST01","IAS",07/11/2014,11:59:44,1,"SANDBOX\test","SANDBOX\test",,,,,,"10.120.133.10",5,0,"10.120.133.10","Canopy_AP",,,18,,,,11,"PEAP_TEST",0,"311 1 10.120.133.1
07/11/2014 00:05:57 4929",,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,"PEAP_TEST_CONNECTION",1,,,,
"USIL01PMPTST01","IAS",07/11/2014,11:59:44,3,,"SANDBOX\test",,,,,,,,0,"10.120.133.10","Canopy_AP",,,,,,,11,"PEAP_TEST",23,"311 1 10.120.133.1 07/11/2014 00:05:57 4929",,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,"PEAP_TEST_CONNECTION",1,,,,
So, basically, the sequence is this:
request , challenge, request , challenge, request, reject
Any idea what might be happening?
Thank you.

Hi,
Have you installed certificates on the NPS server properly? Have you selected the proper certificate in the properties of PEAP?
Here is an article about the Certificate requirements of PEAP,
Certificate requirements when you use EAP-TLS or PEAP with EAP-TLS
http://support.microsoft.com/kb/814394
If your certificate matches the requirement, you may try to reinstall the certificate by export and import.
To export a certificate, please follow the steps below,
Open the Certificates snap-in for a user, computer, or service.
In the console tree under the logical store that contains the certificate to export, click
Certificates.
In the details pane, click the certificate that you want to export.
On the Action menu, point to
All Tasks, and then click Export.
In the Certificate Export Wizard, click No, do not export the private key. (This option will appear only if the private key is marked as exportable and you have access to the private key.)
Provide the following information in the Certificate Export Wizard:
Click the file format that you want to use to store the exported certificate: a DER-encoded file, a Base64-encoded file, or a PKCS #7 file.
If you are exporting the certificate to a PKCS #7 file, you also have the option to include all certificates in the certification path.
If required, in Password, type a password to encrypt the private key you are exporting. In
Confirm password, type the same password again, and then click
Next.
In File name, type a file name and path for the PKCS #7 file that will store the exported certificate and private key. Click
Next, and then click Finish.
To import a certificate, please follow the steps below,
Open the Certificates snap-in for a user, computer, or service.
In the console tree, click the logical store where you want to import the certificate.
On the Action menu, point to
All Tasks, and then click Import to start the Certificate Import Wizard.
Type the file name containing the certificate to be imported. (You can also click
Browse and navigate to the file.)
If it is a PKCS #12 file, do the following:
Type the password used to encrypt the private key.
(Optional) If you want to be able to use strong private key protection, select the
Enable strong private key protection check box.
(Optional) If you want to back up or transport your keys at a later time, select the
Mark key as exportable check box.
Do one of the following:
If the certificate should be automatically placed in a certificate store based on the type of certificate, click
Automatically select the certificate store based on the type of certificate.
If you want to specify where the certificate is stored, select
Place all certificates in the following store, click
Browse, and choose the certificate store to use.
If issue persists, you may try to re-issue the certificate.
For detailed procedure, you may refer to the similar threads below,
Having issues getting PEAP with EAP-MSCHAP v2 working on Windows 2008 R2
http://social.technet.microsoft.com/Forums/windowsserver/en-US/c66cf0a8-24dd-4ccd-b5bb-16bd28ad8d4c/having-issues-getting-peap-with-eapmschap-v2-working-on-windows-2008-r2?forum=winserverNAP
Hope this helps.
Steven Lee
TechNet Community Support

I am trying to get my ipod to work and when i plug my ipod in to my computer with i tunes on i get the message " the ipod cannot be used because the mobile device service is not started" what does this mean

I got the message "the ipod cannot be used because the mobile device service is not started"...when i plugged my ipod in with itunes running

I'd start with the following document with that one:
iPhone, iPad, iPod touch: How to restart the Apple Mobile Device Service (AMDS) on Windows

Why is the LCMCLI ignoring my use of the "-includeSecurity=true' parameter?

Similar Messages

Maybe you are looking for