Why is there a 'waiting for connection' in top left of LRCC?

I installed the LR CC, no problems seemingly. What gives with the "Waiting for Connection" in the Nameplate area. I'm obviously (to me anyway) that the connection for my computer to the internet is working - witness my posting this message.
Also the pulldown from the same area flashes and blinks off.

Similar Messages

My bluetooth is keep searching, even my headset is waiting for connection

my Motorola HS-850 used to work fine with iPhone. But after last time i restored the iPhone, the phone was kept searching and searching even without showing the "Device" bar. i am sure the headset is set to waiting for connection because my laptop can find it but the iPhone just can't. i even tried my friend's iPhone and it works fine the headset. i've also tried several headsets and no luck. The status is keep cricling without showing the "Device" list. i guess it's the iPhone problem because even no headset can work with it, there still should be a "Device..." column without any device list on it, right?
i hope someone has seen this problem before and can help me to solve it, thanks.

I had the same trouble. It worked fine a few times. Then nothing. Just a spinning wheel. Doesn't even show up in the menu bar anymore. It's not powering on as far as I can tell.
What I did was use the SETTINGS > RESET > RESET ALL SETTINGS button. It seemed to free it from whatever loop it was in. It just takes a bit of effort to set up your wallpaper, wifi, passcode and phone faves and weather channels and probably some other settings that I don't know are missing yet.
It's fixable, but who knows why it is happening?
Message was edited by: C Manthe

Adobe Updater flashes a message on my screen once a week that says "No Internet connection. Please check your Internet settings and/or firewall. Waiting for connection..." Everything else works perfectly on my Internet connection.

Adobe Updater flashes a message on my screen once a week that says "No Internet connection. Please check your Internet settings and/or firewall. Waiting for connection..." Everything else works perfectly on my Internet connection.

I'm experiencing a similar problem.
I have a MacBook Pro Late 2011. I was using Lion (not Mountain Lion) with CS3 with no problems. Recently I installed a new hard drive in my computer and used Time Machine to transfer all my files and settings (still with Lion; I did not try to open any Adobe applications at this point). Then I udpated to Mavericks. Upon trying to open one of the Adobe applications, it told me I needed to reinstall CS3. I inserted the original disc and followed the instructions on the ReadMe file. I went to Applications > Utilities > Adobe Installers > Add or Remove Adobe Creative Suite 3 Design Premium. I did a reinstall, and at the end, it said that some of the components failed to install (see screenshot):
I did a partial install (not all CS3 applications), so there could have been more errors than this if all applications were installed. The applications themselves appear to work fine, but when I try to run the updater, it tells me I have no internet connection.
link470 wrote:
Acrobat updater works just fine [after I install the manual updates till 9.2.0].
Can you tell me where to find these manual updates? I looked on this page:
http://www.adobe.com/support/downloads/collection.jsp?collID=1&platform=Macintosh
but I don't see 9.2.0 for any of the CS3 applications.
The CS3 that I purchased (Design Premium) came with Adobe Acrobat 8. I tried to manually install the 8.1.1 update. It said, "Please choose the copy of Adobe Acrobat Professional to update", but the application is grayed out (see below). I did not try to install any other manual updates, yet.
I'm not sure what to do here besides use my CS3 applications the way they are without updating them ever. (I would rather not subscribe to the Creative Cloud.) Any help will be appreciated. I might try doing a complete unintall followed by a fresh install.

Getting "waiting for connection" message in Lightroom 5.5 sync to mobile

I have tried turning off and on the lightroom mobile sync and signing out and back in. Neither started the sync. What else can I try ?

mdjcrook,
I think your sync being stuck and the 'waiting for connection' message were two different issues and would advise you - if you get stuck again - or anyone else reading this thread that is stuck syncing and with the 'waiting for connection' to NOT use 'Delete All Data'
If you are seeing the 'waiting for connection' message and sync is working, ignore it as that bug just prevents properly showing the sync status but not the actual sync activity. We are working on trying to figure out why this gets stuck in this state - it appears to be network related - but we haven't found anything definitive yet.
If you are seeing the 'waiting for connection' message and you sync is stuck then please generate a diagnostic log (Preferences -> Lightroom Mobile -> (Hold Alt/Option key) and click 'Generate Diagnostic Log' and then private message that file to me and we can hopefully determine the real cause of the stuck sync and a workaround that will prevent you having to use the 'Delete All Data' hammer.
Matt

Why is there a "waiting" App on my iPhone 5s?

Why is there a "waiting" App on my iPhone 5s? Is it going to use up my data?

Try This...
Close All Open Apps... Sign Out of your Account... Perform a Reset...
Reset ( No Data will be Lost )
Press and hold the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears. Release the Buttons.
http://support.apple.com/kb/ht1430

Lightroom mobile "wait for connection" LR 5.7 Mac

Hi,
im new with my CC. I connect my LR 5.7 with Lightroom Mobile but it dosen´t sync my collections. The Message on the upper left corner says "wait for connection"
logoff/ relogin, restart LR dosen´t fix it
Ideas anyone?
Best
Sven

DdeGannes ha scritto:
Lightroom by default only reads and writes to the Catalog file.
There is the option in Lightroom preferences if selected to "automatically write metadata to xmp"
You can also achieve this from the menu bar Metadata> save metadata to file.
That said, as far as I know, Lightroom will only read metadata from a file at Import or if you choose from the menu bar Metadata> Read metadata from file.
yes i know, the problem is that if the catalogue is an external storage, with raw's and xmp, if I choose Metadata > Read metadata from file, has no effect!

LR5 will not Sync - "Waiting for connection" above my name

I constantly get the error "Waiting for connection" and the Sync and Sync Setting buttons are not available. I have full internet access with high-speed cable modem.
Mac OS 10.9.5 fully up to date as well as all CC apps.
Please advise?connection err

Your post is unclear and lacks important info.
1. What OS does your laptop use?
2. What iOS version is on your phone?
3. "also my iTunes store will not open it is saying that there is no internet connection, but my internet is connected because i use it on my laptop": If you mean your iPhone reports not being connected to the internet, are you using WiFi or cell data connection (i.e. 3G)?

MMP 5.2p2 'waiting for connection; X on queue' errors, X increasing

Shortly after manually upgrading our standalone POP/IMAP multiplexors to 5.2 Patch 2, we started experiencing problems where the CPU utilization of the AService process would drop to almost nothing, and this message would begin to appear in the logs:
20060328 161950 PopProxyAService.cfg (ldap 0x4bb0d8) (uid=redacted) waiting for connection; 10 on queue
20060328 161952 PopProxyAService.cfg (ldap 0x819c50) (uid=another.redacted) waiting for connection; 11 on queue
20060328 161952 PopProxyAService.cfg (ldap 0x817918) (uid=redacted3) waiting for connection; 12 on queueThis message continues with the value increasing:
20060328 163719 PopProxyAService.cfg (ldap 0xcae928) (uid=redacted4) waiting for connection; 235 on queue
20060328 163733 PopProxyAService.cfg (ldap 0xcb13c8) (uid=redacted5) waiting for connection; 236 on queue
20060328 163809 PopProxyAService.cfg (ldap 0xcb5250) (uid=redacted6) waiting for connection; 237 on queue... until AService is restarted.
At first blush, it looks like something is making the LDAP connection wedge, and it's not timing out for some reason, but that's a guess.
I see that someone on the Info-iMS list had the same problem shortly after installing 6.1 back in September 2004:
http://lists.balius.com/pipermail/info-ims-archive/2004-September/019517.html
Has anyone else seen this or know if this has been identified as a specific bug ... or is a symptom of something else?
Royce

That's the problem. THere IS no timeout for the
situation you've gotten into, where MMP (or messaging
server itself) believes a connection exists, and is
active, but gets no response.That's unfortunate. It sounds like a useful timeout for a number of circumstances.
The solution is to refresh all connections so you
don't get into this situation.Unfortunately, the LdapRefreshInterval doesn't appear to be a documented option for 5.2p2, but only for 6. Can you confirm this?
The overhead of binding and unbinding once every 10
minutes or so is very, very minimal.Fair enough.
The latter, if it exists, would be a much more
precise way of handling our symptom. Well, actually, the real problem is that the
connection between MMP and LDAP is getting silently
severed by the load balancer. That's something
that's BAD for both LDAP and for MMP.
Causes fd leaks in ldap, as it never knows when to
close what it beleives is an active connection. It
will attempt to close, but, since it can never get an
ack back after the load balancer severs the
connection, it can't fully close it.
This is truly a bad situation, and it's easy to fix.
recycle the connections before the LB cuts you off.It looks like our LB has an idle timeout of 1 hour, with any traffic at all resetting the timer. In other words, it doesn't look like the LB that's causing the wedge. There is also no internal LB probing going on.
From ulimit/plimit/pfiles output, I've also learned that the slapd user currently has a 65536 FD cap. I've been monitoring the FD usage of the slapd process for the past couple of days, and our LDAP servers have not been getting above 1000. We've also had multiple lockups in that period of time. So running out of FDs may not be causing our problem.
You're very clear about what you want.
Unfortunately, you are not correct about what is
s possible.Perhaps our definitions of 'possible' need some negotiation. :) You're saying that the MMP can't do this today, which I accept as fact. But the pieces are all there, as far as I can see.
The MMP keep close track of how many queries have been served by a particular LDAP connection, how many are on queue without being serviced, and the age of the existing connection. In other words, the app has all the information necessary to do what I'm describing: notice that a connection hasn't actually gotten a response back in X seconds, and terminate it.
Since the app doesn't support what I'm yearning for, this is academic at this point, so I agree that it's time to take a different tack. I don't want to appear ungrateful for your responses. I appreciate the time you've spent on this issue with me. I'm just trying to understand the underlying issues.
So I find myself in these unfortunate circumstances:
1. 5.2 doesn't lock up.
2. No other applications using our LDAP are experiencing any hung LDAP connections (neither at the TCP level nor at the LDAP application level), even though they're using the same LB front-end.
3. From the output of plimit/pfiles, our LDAP servers are configured to handle far more file descriptors than they're consuming. The FD theory appears to not apply.
4. Our LB is configured to time out after 1 hour of inactivity.
5. It seems unlikely that any of the LDAP connections coming from the MMPs are reaching the 1-hour threshold, considering how high-volume they are for POP, unless they are distributing queries across connections very asymmetrically. Even at 3am, there are enough people who leave their computers on all night who check every 1 minutes that the connections are almost never idle for more than a few tens of seconds.
Based on the above, it's hard for me to not conclude that 5.2.p2 appears to either have a regression bug that's causing the wedge itself, or has changed the way that it handles some types of timeouts.
We cannot use 5.2 because we need a bugfix that is in 5.2p2. We appear to not be able to use 5.2p2 because it has this lockup problem that 5.2 does not.
My 'strings' search for LdapRefreshInterval on the AService binary and Pop/IMAP libraries turns up nothing. Can you confirm that 5.2p2 does or does not support this feature?
If not, and the only solution is to use LdapRefreshInterval, do you know if II can run 6.x MMP on our multiplexor boxes and leave 5.2 running on our back-end systems?

Why my Firefox always lack and why I have to wait for minutes to open a page?

Dear customer support officer,
Why my Firefox always lack after I have update with Window 7 Service Pack 1? ... and why I have to wait for minutes to open a page?
I discovered from the "Task Manager", every time when Firefox is lack, it took up 100% of my "CPU Useage".
Below, kindly find my version spec for your investigation convenience. Many thanks in advance for your prompt support : )
Sincerely yours,
Charmayne
Application Basics
Name
Firefox
Version
5.0
User Agent
Mozilla/5.0 (Windows NT 6.1; WOW64; rv:5.0) Gecko/20100101 Firefox/5.0
Profile Directory
Open Containing Folder
Enabled Plugins
about:plugins
Build Configuration
about:buildconfig
Extensions
Name
Version
Enabled
ID
Better Facebook!
5.852
true
[email protected]
Java Console
6.0.20
true
{CAFEEFAC-0016-0000-0020-ABCDEFFEDCBA}
Java Console
6.0.22
true
{CAFEEFAC-0016-0000-0022-ABCDEFFEDCBA}
Java Console
6.0.23
true
{CAFEEFAC-0016-0000-0023-ABCDEFFEDCBA}
Java Console
6.0.24
true
{CAFEEFAC-0016-0000-0024-ABCDEFFEDCBA}
Java Console
6.0.26
true
{CAFEEFAC-0016-0000-0026-ABCDEFFEDCBA}
RealPlayer Browser Record Plugin
14.0.3
false
{ABDE892B-13A8-4d1b-88E6-365A6E755758}
Modified Preferences
Name
Value
accessibility.blockautorefresh
true
accessibility.typeaheadfind
true
accessibility.typeaheadfind.flashBar
0
browser.history_expire_days.mirror
180
browser.places.smartBookmarksVersion
2
browser.startup.homepage
http://www.google.com/webhp?hl=en
browser.startup.homepage_override.buildID
20110615151330
browser.startup.homepage_override.mstone
rv:5.0
browser.tabs.loadInBackground
false
dom.disable_open_during_load
false
extensions.lastAppVersion
5.0
keyword.URL
http://mystart.incredimail.com/?loc=ff_address_bar&a=ICetqQnqJ0&search=
network.cookie.prefsMigrated
true
places.database.lastMaintenance
1311818987
places.history.expiration.transient_current_max_pages
64401
places.last_vacuum
1298980389
print.print_printer
Microsoft XPS Document Writer
print.printer_Microsoft_XPS_Document_Writer.print_bgcolor
false
print.printer_Microsoft_XPS_Document_Writer.print_bgimages
false
print.printer_Microsoft_XPS_Document_Writer.print_command
print.printer_Microsoft_XPS_Document_Writer.print_downloadfonts
false
print.printer_Microsoft_XPS_Document_Writer.print_edge_bottom
0
print.printer_Microsoft_XPS_Document_Writer.print_edge_left
0
print.printer_Microsoft_XPS_Document_Writer.print_edge_right
0
print.printer_Microsoft_XPS_Document_Writer.print_edge_top
0
print.printer_Microsoft_XPS_Document_Writer.print_evenpages
true
print.printer_Microsoft_XPS_Document_Writer.print_footercenter
print.printer_Microsoft_XPS_Document_Writer.print_footerleft
&PT
print.printer_Microsoft_XPS_Document_Writer.print_footerright
&D
print.printer_Microsoft_XPS_Document_Writer.print_headercenter
print.printer_Microsoft_XPS_Document_Writer.print_headerleft
&T
print.printer_Microsoft_XPS_Document_Writer.print_headerright
&U
print.printer_Microsoft_XPS_Document_Writer.print_in_color
true
print.printer_Microsoft_XPS_Document_Writer.print_margin_bottom
0.5
print.printer_Microsoft_XPS_Document_Writer.print_margin_left
0.5
print.printer_Microsoft_XPS_Document_Writer.print_margin_right
0.5
print.printer_Microsoft_XPS_Document_Writer.print_margin_top
0.5
print.printer_Microsoft_XPS_Document_Writer.print_oddpages
true
print.printer_Microsoft_XPS_Document_Writer.print_orientation
0
print.printer_Microsoft_XPS_Document_Writer.print_pagedelay
500
print.printer_Microsoft_XPS_Document_Writer.print_paper_data
1
print.printer_Microsoft_XPS_Document_Writer.print_paper_height
11.00
print.printer_Microsoft_XPS_Document_Writer.print_paper_size_type
0
print.printer_Microsoft_XPS_Document_Writer.print_paper_size_unit
0
print.printer_Microsoft_XPS_Document_Writer.print_paper_width
8.50
print.printer_Microsoft_XPS_Document_Writer.print_reversed
false
print.printer_Microsoft_XPS_Document_Writer.print_scaling
1.00
print.printer_Microsoft_XPS_Document_Writer.print_shrink_to_fit
false
print.printer_Microsoft_XPS_Document_Writer.print_to_file
false
print.printer_Microsoft_XPS_Document_Writer.print_unwriteable_margin_bottom
0
print.printer_Microsoft_XPS_Document_Writer.print_unwriteable_margin_left
0
print.printer_Microsoft_XPS_Document_Writer.print_unwriteable_margin_right
0
print.printer_Microsoft_XPS_Document_Writer.print_unwriteable_margin_top
0
privacy.sanitize.migrateFx3Prefs
true
security.default_personal_cert
Select Automatically
security.warn_viewing_mixed
false
Graphics
Adapter Description
NVIDIA GeForce G102M
Vendor ID
10de
Device ID
0873
Adapter RAM
512
Adapter Drivers
nvd3dumx,nvwgf2umx,nvwgf2umx nvd3dum,nvwgf2um,nvwgf2um
Driver Version
8.15.11.8631
Driver Date
7-1-2009
Direct2D Enabled
Blocked on your graphics driver. Try updating your graphics driver to version 257.21 or newer.
DirectWrite Enabled
false (6.1.7601.17563, font cache n/a)
WebGL Renderer
(WebGL unavailable)
GPU Accelerated Windows
0/1

upgrade your browser to Firefox 8 and check
* getfirefox.com

After installing Mountain Lion, why is there Yahoo access for one user but not another?--both are administrators.

After installing Mountain Lion, why is there Yahoo access for one user but not another?--both are administrators.

We've had several instances where we have had to run chkdsk on arrays with over 1m files. Average completion time is approximately 72 hours. The maximum downtime window they have available is the 64 hour weekend window. File sizes and number of files were
much smaller then than they are now.
The idea, in theory, was to use VHDs to compartmentalize the data into smaller volumes which could be more easily managed. It would also improve performance when transferring these compartments of data as they would use sequential read/write rather than
fragmented/random. This idea was never fleshed out in entirety, they don't split data up into little containers, but simply into big ones per project. Hence the 11m files in one container that I am currently trying to diagnose.
Some other important facts: The VHD in question is mounted in B:/project/ as this server also allows remote workers to log in, but they are restricted to see only data in E:. Disks A-D are hidden via group policy.
Update: icacls is failing on a large number of files within this dataset. I counted the path characters to ensure it wasn't the 255 character limit I was encountering and verified that the paths being blocked are only about 150 characters long. Once it finishes,
I'll have to try taking ownership and then re-running it. At this point I still have no idea how long to expect. I'm running out of time as the environment will be in use again at 9AM tomorrow morning.

Why is there no scaling for high resolution monitors in Adobe Bridge CC?

Why is there no scaling for high resolution monitors in Adobe Bridge CC?
Photoshop CC, Illustrator CC and Indesign CC have 200% scaling for high resolution monitors in their preferences panel but Bridge CC does not, when will this feature be added to Bridge CC Adobe???

qsea wrote:
Why is there no scaling for high resolution monitors in Adobe Bridge CC?
Photoshop CC, Illustrator CC and Indesign CC have 200% scaling…
Inconsistency between or among applications in the artificial "suites" should come as no surprise.
The "suite" concept is a fabrication of Adobe marketing and bean-counting types. The engineering teams are totally independent of each other, they are not only in different buildings but in different cities and states of the American Union, even in different countries.
The fact that they have little if any communication among them is highlighted by requests occasionally made in these forums by top Adobe engineers to let the other teams know when there are problems in one application that impact our workflow in another one.

Why is there no support for RTF files in Pages?

Why is there no support for RTF files in Pages?
This is nuts!

You are not alone.
Actions speak louder than words, but Apple does manage to still distract many from what is self evident before them.
I am astonished by those who swear that non-existent features, or features that pre-exist the current version make Pages 5.2 a major upgrade.
An affect that does seem to wear off with familiarity, as each version of Pages 5 gets a boost in the App Store, only to see the disapproval rating surge back again.
Pages was always one of the top purchases in the App Store, now it doesn't even rate.
Peter

Opening HDR images in ACR is great but why is there no support for EXR?

As said above why is there no support for the EXR format, which is THE industry standard for HDR images?
Christian Bloch, author of the standard reference book for HDR imaging is thinking the same:
"The next step should certainly be OpenEXR support. Full-on 32-bit TIFFs are annoyingly huge for no good reason. Seriously! For the image above it's 120 MB versus 30 MB in EXR, with absolutely no quality difference."
Will EXR support come in the near future?

Don't get pithed off Jeff, I think he meant it as a compliment.
pith·y
[pith-ee]
adjective, pith·i·er, pith·i·est.
1. brief, forceful, and meaningful in expression; full of vigor, substance,
or meaning; terse; forcible: a pithy observation.
2. of, like, or abounding in pith.
-Noel

Why is there no disc for Final Cut Pro X, is there one coming, and how do I transfer the program to a new machine from the download? Thanks!

Hello:
Why is there no disc for Final Cut Pro X?
Is there one coming?
Can and how do I move the downloaded application from my old machine to a new computer?
Thanks!

You purchase FCX in the Mac App Store, there is no disc. You can reload past purchases under your account within the app store. You should also be regularly backing up your system

Why are there no favicons for many of my bookmarks? Where there was a favicon, a blank box with a dotted outline now appears.

Why are there no favicons for many of my bookmarks? Where there was a favicon, a blank box with a dotted outline now appears.

Problems with bookmarks and history not working properly can be caused by a corrupted places.sqlite database file.
You can check for problems with the places.sqlite database file in the Firefox Profile Folder.
*http://kb.mozillazine.org/Bookmarks_history_and_toolbar_buttons_not_working_-_Firefox
*https://support.mozilla.org/kb/Bookmarks+not+saved#w_fix-the-bookmarks-file

Why is there a 'waiting for connection' in top left of LRCC?

Similar Messages

Maybe you are looking for