Why is there an E where it usually says 3G right in-between where my carrier is and where the time is, Why is there an E where it usually says 3G right in-between where my carrier is and where the time is

Right after where it says my carrier, and before where it says the time, it usually has a 3G but for the past hour it has said E and at one point it went to a circle and my Internet is going really slow. What's happening?

Look, many of us long time users of Firefox ''(12 years for me)'' feel pretty much the same as you do about Australis on the Desktop. I have tested and used the Australis UX Nightly builds from the days right after Firefox 4.0 was released; so Firefox 29 holds no surprises for me.
The best that anyone here in the Firefox Support forum can do is to offer advice on how to modify Firefox 29 or to mention which extensions you can install to to fix what you don't like about the changes. Beyond that, I suggest that you use the Feedback page to let Mozilla know how you feel. <br />https://input.mozilla.org/en-US/feedback
"Bad design" ''(in your opinion)'' or not - use it as is, fix what you don't like, or switch to a different browser. Mozilla isn't going to dump Australis over user complaints, even if it would drag Firefox to its' grave.

Similar Messages

I am trying to backup my Itunes onto my external hard drive. I am at the step where I on Itunes, click on File - Library - Organize library. I am suppose to check mark both boxes there, It won't allow me to check mark the second box, why? How to fix this.

I am trying to backup my Itunes onto my external hard drive. I am at the step where I on Itunes, click on File ->Library ->Organize library. I am suppose to check mark both boxes there, the first being "Consolidate Files" & the second being "Reorganize files in the folder 'Itunes Media'. I am able to checkmark the first box but It won't allow me to check mark the second box, why? How can i fix this? Please help!

Well you must have made a mistake somewhere. The last instruction of step four reads:
When you've found your iTunes library folder, drag that folder to your external hard drive. This will begin the iTunes backup. The amount of time the backup will take depends on the size of your library. When the transfer is done, your backup is complete and your external hard drive can be disconnected.
Normally dragging content from to a new location on a different drive will result in a copy action which is what you were supposed to do. At a guess you somehow managed to move the iTunes folder. Then when you started iTunes it created a new blank library for you assuming it had just been installed rather that raising a warning.
Close iTunes. Rename the iTunes folder on the internal drive as iTunes (Empty) then copy the iTunes folder from the external back into the User's Music folder. Start iTunes. All should be well.
When you've made sure it all works please read my User Tip and use that method to backup in future. Since you already have a folder with the backup in place you can skip the "Make New" operation in the fourth step and simply choose the external folder.
tt2

My iPhone says "o death" where the date should be on the lock screen, why is it doing this and how do I get the date back?

My iPhone says "o death" where the date should be on the lock screen, why is it doing this and how do I get the date back?

I tried powering off and on and it went away, but I can't tell if it's been broken into since everything works fine (I'm using it now) is there a test to see if it's been broken into?
Thanks for all your replies!

I purchased lion osx 10.7 and it has just said "installing" where you click to "buy now" for the last 2 hours. There is no progress bar or anything. What is going on?

I purchased lion osx 10.7 and it just says "installing" where you click to "buy it now" and it has been doing nothing for the past 2 hours. There is no progress bar or anything that says its being downloaded. I was sent an email by apple confirming I purchased it but nothing is happening. I tried restarting the internet and clicking on download and the same thing happens. What is going on?

Mine says it's going to take 10 hiurs to download or something daft. I'm guessing the servers are being hit pretty hard right now. Like the poster above said, check in the 'purchased' part of the app store to make sure it's actually ticking along and then just...wait.

I use to administrate my DSL modem via an ip-address. When I enter it into FF8 I am asked where to save the file. Why and how can I prevent FF8 from doing that?

I use to administrate my DSL modem via an ip-address. When I enter it into FF8 I am asked where to save the file. Why and how can I prevent FF8 from doing that?
And now anytime I am entering an ip-address I am asked if I want to download the file.

It happens when the modem server doesn't send the file as text/html, but with another MIME type.<br />
I tried the index.html addition in case the server might send that file as text/html.<br />
If your DSL modem has a support website then you can try to ask there for advice about how to configure the modem server.

Where has the "Clean up" "Clean up by" option gone for organizing folders? I just upgraded to OS X Maverick today and noticed it was no longer a option when right clicking; also, it is grayed out in the view tab.

Where has the "Clean up" "Clean up by" option gone for organizing folders? I just upgraded to OS X Maverick today and noticed it was no longer a option when right clicking; also, it is grayed out in the view tab.

Hi i had this problem myself what you need to do is..
right click and press 'show view options'
then go to the arrange by and sort by options near the top and change them both to none
click save as defult at the bottom
then when you right click the clean up by options will now be there
hope this helps

HT3576 I have many apps where i must swipe down and it constantly brings down the notification screen. Is there anyway to disable this or activate it a different way because this really bugs me.

I have many apps where i must swipe down and it constantly brings down the notification screen. Is there anyway to disable this or activate it a different way because this really bugs me.

I don't have that problem. Perhaps I touch the screen lower when I wipe down? I don't know for sure but there's got to be some difference in the way that we wipe down. you might wish to do some experimenting.

My iPod has not been working for a month now and i was hoping that you could help me.The part where you charge and sync the iPod is not connecting.There is defiantly not the lead as we use it for the iPhone and that works please could you help!

my iPod has not been working for a month now and i was hoping that you could help me.The part where you charge and sync the iPod is not connecting.There is defiantly not the lead as we use it for the iPhone and that works please could you help!
yours sincerly
jackfromsurrey

What I am saying is ..........
The iPhone HAS to be active making calls on the UK carrier network for the carrier to identify as "theirs" and therefore eligible for the Carrier to unlock
The way to achieve this is to use a PAYG sim making and receiving calls to establish a customer relationship with the Carrier and then follow the Carrier's process to unlock
With a PAYG it usually means adding a specified (by the carrier ) amount usually £15 /£20 depending on the carrier
This is how O2 function and according to Gemma this is how Vodafone work

I've asked this before, but the spinning wheel is still there and sometimes it freezes up to where I have to shut it down manually.

I've asked this before, but the spinning wheel is still there and sometimes it freezes up to where I have to shut it down manually. Can someone tell me how to fix this!! I dont really know how to find certain places to check on things.

The feature media.windows-media-foundation.enabled by default is true, did you have to set it back? Please also check out version 29 it just came out this week.

Hello there, am new here and very stressed, i have an Imac core i3 which is logging off itself after a few seconds of login, it goes back to the login menu where i put the password. I have tried to repair the os but my pioneer rom is not reading the disk.

Hello there, am new here and very stressed, i have an Imac core i3 which is logging off itself after a few seconds of login, it goes back to the login menu where i put the password. I have tried to repair the os but my pioneer rom is not reading the disk. I press the :c" button on startup but its not picking up the disk in the rom, i have tried to put the disk in an external rom but same answer, am starting to think that my os disk is bad. Please help me.

Please read this whole message before doing anything.
This procedure is a diagnostic test. It’s unlikely to solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
The purpose of this exercise is to determine whether the problem is caused by third-party system modifications that load automatically at startup or login. Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards. Boot in safe mode* and log in to the account with the problem. The instructions provided by Apple are as follows:
Be sure your Mac is shut down.
Press the power button.
Immediately after you hear the startup tone, hold the Shift key. The Shift key should be held as soon as possible after the startup tone, but not before the tone.
Release the Shift key when you see the gray Apple icon and the progress indicator (looks like a spinning gear).
*Note: If FileVault is enabled under Mac OS X 10.7 or later, or if a firmware password is set, you can’t boot in safe mode.
Safe mode is much slower to boot and run than normal, and some things won’t work at all, including wireless networking on certain Macs.
The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
Test while in safe mode. Same problem(s)?
After testing, reboot as usual (i.e., not in safe mode) and verify that you still have the problem. Post the results of the test.

How can I find out who created or which id created the Essbase app. Is there any file where can i go and check to see?

Hi All,
Do you guys know how can I find out who created or which id created the Essbase app. Is there any file where can i go and check to see?
I am on UNIX and 11.1.2.2
Thanks all.

Don't think that information is kept anywhere.
This is how the log will look like during app and db creation
[Fri Aug 02 13:35:55 2013]Local/ESSBASE0///9036/Info(1051001)
Received client request: Get Extended Application Info (from user [celvin@Native Directory])
[Fri Aug 02 13:36:04 2013]Local/ESSBASE0///8072/Info(1042059)
Connected from [fe80::a531:1592:875b:3873]
[Fri Aug 02 13:36:04 2013]Local/ESSBASE0///8072/Info(1051001)
Received client request: MaxL: Execute (from user [celvin@Native Directory])
[Fri Aug 02 13:36:06 2013]Local/ESSBASE0///5432/Info(1042059)
Connected from [fe80::a531:1592:875b:3873]
[Fri Aug 02 13:36:15 2013]Local/ESSBASE0///8072/Info(1051061)
Application test loaded - connection established
[Fri Aug 02 13:36:15 2013]Local/ESSBASE0///8072/Info(1054027)
Application [test] started with process id [4324]
[Fri Aug 02 13:36:15 2013]Local/ESSBASE0///8072/Info(1056010)
Application test created
[Fri Aug 02 13:37:22 2013]Local/ESSBASE0///6972/Info(1051001)
Received client request: MaxL: Define (from user [celvin@Native Directory])
[Fri Aug 02 13:37:22 2013]Local/ESSBASE0///6972/Info(1051001)
Received client request: MaxL: Fetch (from user [celvin@Native Directory])
[Fri Aug 02 13:37:28 2013]Local/ESSBASE0///4520/Info(1042059)
Connected from [fe80::a531:1592:875b:3873]
[Fri Aug 02 13:37:28 2013]Local/ESSBASE0///4520/Info(1051001)
Received client request: MaxL: Execute (from user [celvin@Native Directory])
[Fri Aug 02 13:37:28 2013]Local/ESSBASE0///4520/Info(1054014)
Database test loaded
[Fri Aug 02 13:37:28 2013]Local/ESSBASE0///4520/Info(1056020)
Database test.test created
Regards
Celvin
http://www.orahyplabs.com

I am trying to use Find My Friends and I have been through troubleshooting 3 times. Why won't my location work? Everything is on but the 2nd screen in Find My Friends is grayed out, whereas my other family members 2nd screens are active?

I am trying to use Find My Friends and I have been through troubleshooting 3 times. Why won't my location work? Everything is on but the 2nd screen in Find My Friends is grayed out, whereas my other family members 2nd screens are active? I have an iPhone 6 Plus, latest ios8, and yes my location says it is being shared, but it is not.

Pyralus wrote:
I decided to try and boot from the Tiger discs, but when I did, all I got was a screen that looked like a blizzard of pixels.
The firmware was likely changed and it's not compatible anymore or the disk is bad.
I was able to boot using the Snow Leopard disc from both my new MBP and my girlfriends MB, but both said that OS X could not be installed on this computer, and I couldn't even use the disc utility to wipe the drive.
Those disks don't have the hardware drivers your machine needs.
Your going to need to get a Snow Leopard retail install disk from Amazon/elsewhere.
Do I need to have a serial number to reinstall OS X?
Thankfully No.

I want firefox to remember my ID and password on certain web pages. There is no "Option" tab in the Help section (like on my PC) where I could go to Security and checkmark the Remember Password box.

I would like a window to appear when I log in on a web page to ask me if I want to save my password.
Also, why is there no "Option" tab on the Help menu in the Mac like it is on my PC?

After first closing the site's browser window, I cleared the cookies with no problem.
Next, I opened up the page that is causing my problem. The Microsoft Security window opened up as it should and it was blank.
The option of whether I was using a public or a private
computer was blinking on 'public' as it should and I changed that to 'private'.
The lines for 'Domain/Username' and 'Password" were blank, as they should be at this time.
I entered whatever I had to on these two lines, then clicked on "log In". At no time, however, did the Firefox toolbar at top of screen (picture file attached) appear and ask whether to remember that password. Yes, the page now opened - and we are back to Square One.
I am aware that when entering the URL in the address box, a dropdown box opens and contains quite a few URLs identical to the one I am entering just now, or at least connected to pages of the same site.
I am wondering whether that is what's messing me up? But how can I clear these entries of "websites visited in the past from Firefox's memory?
In case you would want to see exactly what it is I am talking about, you might go to https://support.ataretail.com

Where is the refresh button and where is the bar at the bottom of the page that gives the loading status of the page? Why did you mess with something that was perfectly fine??

I updated to firefox 4 and it's not as good as the former version. There is no refresh button, and I use that a lot. There is no loading status bar at the bottom of the page and I liked the tabs BELOW the page address.
Why do you keep changing things, just for the H**L of it...

In Firefox 4 by default the Stop, Go and Reload (Refresh) buttons are combined and attached to the right hand edge of the location bar.
When you are typing in the location bar it will show the Go button. When a site is loading it shows the Stop button. At other times it shows the Reload button.
If you want separate buttons, right-click on a toolbar and choose Customize, you can then drag and drop the stop or reload buttons and place them elsewhere. If you place them in the order "Reload-Stop" on the right hand edge of the location bar they will be combined again. For more details on customizing the toolbar see https://support.mozilla.com/kb/How+to+customize+the+toolbar
For details about what happened to the status bar see https://support.mozilla.com/kb/what-happened-status-bar

HT4539 I just downloaded the newest version of Itunes and had to deauthorize all of my computers. I do not see a store menu with drop down, I am stuck and can't see where the authorization is on this software. It is not in my account and there is no sto

I just downloaded the newest version of Itunes, I deauthorized all of my computers and now can't find the menu to authorize. It refers to a store menu that doesn't exist on the new software. My account allowed me to deauthorize, but has no option to authorize. I am completely confused with the new software, I just want to download my music to my new computer.

With iTunes 11 on PCs the drop-down menus are hidden by default - control-B should get the menus to show
This screenshot is from a Mac, but it should be similar on a PC :

ITunes Match does not list all my music before signing up. Only the ones i've purchased thru itunes and several songs of my own. Where can I find my 400 missing songs? Being able to store ALL music is the only reason why I signed up. Please help.

iTunes Match does not list all the music I had on my iphone. Not on my phone or iTunes. Only shows the music I've purchased from itunes and none of my 400+ songs. Please help. Thank you.

Is your music in your iTunes library on your computer and has match completed its scan of this library.
jim

Why is there an E where it usually says 3G right in-between where my carrier is and where the time is, Why is there an E where it usually says 3G right in-between where my carrier is and where the time is

Similar Messages

Maybe you are looking for