Why is "x2^0" Displayed on Fixed point numbers in hex format

I have a requirement to display a fixed point value (unsigned 20bit value) in hex format. At present when I set the numeric indicator to display this I get a "x2^0" string attached to the end.
What is this and is there anyway of turning it off?
I am trying to give a display that replicated some old style hex mechanical switches, by selecting a fixed size font and limiting the display to only be big enough to display the five hex digits (minimum field length 5 with pad with zeros) I get almost what I want (the "X2^0" is hidden of right hand side)
However when I delete characters from the number (to say enter a new number) the "X2^0" part then shows. See attached jpg which shows the format string.
This is by no means a show stopper but just annoying, is there some where to turn this formatting string off?
Dave.
Attachments:
20 bit hex.JPG ‏52 KB

It is showing how many of those bits are for the decimal places. It is kind of important information.
But since you are dealing with an Unsigned Integer (20,20 means there is no fractional part), why not just use a U32. You can set the display of the indicator for that to be %05x to just display the lower 5 hex characters.
There are only two ways to tell somebody thanks: Kudos and Marked Solutions
Unofficial Forum Rules and Guidelines

Similar Messages

IHow to force display of trailing zeros for fixed point numbers?

I have an 8 bit unsigned fixed point number, with 7 integer bits and 1 fractional bit, so the desired delta is 0.5. I want it to always display the fractional bit, even when that bit is 0. In other words, as this number is incremented, I want to see:
0.0
0.5
1.0
1.5
etc.
But instead I'm seeing:
0
0.5
1
1.5
etc.
I set the display format to Floating point, with 1 digit of precision. The "Hide trailing zeros" checkbox is NOT checked. What am I doing wrong?
I realize I could convert to single precision for display purposes to make this happen, but I'd rather make this work with fixed point.
Thanks,
-Ron

I just rustled up a VI with what I understand your input to be - unsigned 7 bit mantissa and 1 bit exponent input, and have it displaying 2 decimal places.... Is this what you're after or did I miss it?
- Cheers, Ed
Attachments:
zeros.vi ‏7 KB

If Firefox is going to be putting a new major version out every month, why do they even show the version point numbers?

i want to kn

A new version is scheduled to be released every 6 weeks. Sometimes this is delayed over holidays or for other reasons.
So that would be: 27.0
When there is an emergency fix for Firefox, this usually is designated with a further decimal point:
So that would be: 27.0.1
I don't know why that isn't 27.1, but either way is fine with me.

Message-Popup: How to display a number (from variable) in hex-format?

Hello,
i have a numeric FileGlobal that is display in a MessagePopup-step with str(FileGlobal.param1)
How can i change this that it display the number as hexvalue.
For example if Number is a 10, then the MessagePopup should display a 0xA.
Thanks for help
Solved!
Go to Solution.

HI,
You should try this expression Str(FileGlobal.param1,"%X",1 ,True)
Hope this helps
Rodéric L
Certified LabVIEW Architect

Usage of NOT having Fixed Point Arithmetic?

Hello!
SAP recommends to always do programs with Fixed Point Arithmetic attribute checked. Please don't explain here what is Fixed Point Arithmetic - I know this and it's is not my question.
The question is: why do we have it at all? Why aren't all programs simply fixed-point-arithmetic without attribute to activate or deactivate this?
I suppose that there are situations which require Fixed Point Arithmetic NOT being set, but I can't imagine any. Could anyone offer an explanation?
Thanks in advance!
Igor
Edited by: Igor Barbaric on Mar 21, 2008 9:30 AM
No replies - I'll try to bring the question to your attention once again:
Please, does anybody know the purpose of NOT having Fixed Point Arithmetic?

Please check if this helps u
This attribute defines, whether for numerical data objects of data type p (packed numbers) is the decimal point is relevant in calculations or assignments or if it is omitted. Normally, this attribute is always switched on and you might ask, why it can be switched off at all. Well, in very ancient times packed numbers had no real decimal point. It was taken into account only for presentation purposes. In order to stay downward compatible, for the introduction of fixed point arithmetic this switch was needed. In fact there are still programs that switch fixed point arithmetic off ¨C for example financial programs that calculate on the basis of cents instead of dollars.
Thanks Arjun

Issue with fixed point number output from 9219 module for full bridge measurement (cRIO/FPGA)

Hi,
I have a question regarding the fixed point output acquired from a 9219 module (in FPGA on a cRIO) when setup to acquire a strain measurement (full bridge).
Software: Labview 2009
Hardware: cRIO-9012 (NI-RIO 3.2.1), NI-9219 module
The 9219 module is configured in the project as follow:
Ch0: Full-Bridge +/- 7.8mV/V
Ch1: Voltage +/- 4V
Ch2: Voltage +/- 15V
Ch3: Voltage +/- 60V
The calibration mode is 'Calibrated' so the FPGA outputs fixed point numbers.
My issue is that the precision of the fixed point number for Ch0 (strain) is "(fixed point <+/-32,-1>[-2.5e1,2.5e1]:1.16e-10)", which indicates that the fixed point number is a value between +/- 0.25 and not the +7.8mV/V as I expected?
The fixed point number does not change in precision whether the range for the strain measurement is set at +/- 7.8mV/V or +/-64mV/V (the two available options).
As the fixed point number doesn't change precision I'm assuming that changing the range of the strain measurement changes the resolution of the acquired number? And as such I will need to perform additional scaling on the fixed point number to convert it to the expected range?
There is no mention of scaling of the voltage or strain measurements mentioned in any documentation or examples, with the only scaling example provided for the thermocouple measurements.
Any help/clarification is much appreciated.
Regards,
Mike

Hello Mike,
Hopefully I can help clarify some of the behavior you are seeing.
My issue is that the precision of the fixed point number for Ch0 (strain) is "(fixed point <+/-32,-1>[-2.5e1,2.5e1]:1.16e-10)", which indicates that the fixed point number is a value between +/- 0.25 and not the +7.8mV/V as I expected?
For calibrated values on the FPGA VI, the returned data is a Voltage measurement, not a directly calculated strain value. Based on the specified ranges for the 9219 in a Full bridge configuration, 250 mV will encompass all possible input values, at the module provided excitation (2-2.7V dependent on the sensor gage resistance).
The fixed point number does not change in precision whether the range for the strain measurement is set at +/- 7.8mV/V or +/-64mV/V (the two available options).
As you may notice from the fix-point definition, the fixed point data contains 32-bit precision which is larger than the acquired precision of 24-bits provided by the 9219. The fixed point data-type is coded to accept input encompassing both the range and precision of the instrument; such that, no additional coercion of the input data values is required based on user-defined software settings, i.e. the bridge sensitivities +/- 7.8mV/V or +/-64mV/V.
As the fixed point number doesn't change precision I'm assuming that changing the range of the strain measurement changes the resolution of the acquired number? And as such I will need to perform additional scaling on the fixed point number to convert it to the expected range?
The documentation does not clearly define that by varying the discrete levels of strain input (+/- 7.8mV/V or +/-64mV/V) the range of the ADC on the module is also adjusted. I am working to follow up further on this topic, to provide a clarification on the module documentation. As for scaling, the voltage values acquired regardless of the ADC resolution will still be related strain via the bridge sensitivity. The resolution of the ADC will simply define the smallest measurable change in the strain value.
There is no mention of scaling of the voltage or strain measurements mentioned in any documentation or examples, with the only scaling example provided for the thermocouple measurements.
For converting the acquired voltage values to a strain measurement, I would recommend the documentation linked here for a detailed explanation on strain calculation. Often, users will forward the acquired voltage data as fixed point values through a DMA FIFO to the RT controller on the Compact RIO; such that, they may handle conversion from voltage to strain using floating point math in real-time.
I hopes these responses provided a bit of clarity. I will continue to work to provide additional information on the 9219 specification information. Please post back any further questions.
Cheers!
Edit: Forgot to add the link.
Message Edited by Pcorcs on 04-14-2010 04:55 PM
Patrick Corcoran
Application Engineering Specialist | Control
National Instruments

Exponential to fixed point number convert

Hello All,
I am getting below result for the double value.
double d = 7777777.77;
System.out.println(d); O/P >> 7777777.77
double d1 = 88888888.88;
System.out.println(d1); O/P >> 8.888888888E7
Actually I dont want the value to be in Exponential format. I found that when the decimal is before 7 digits , am getting correct value (without exponential format). But when decimal is after 7 digits then value gets in exponential format.
If this is the default behaviour which we cant change then how to convert the exponential format number to fixed point number.
Thanks
Prasad.

Don't use the default conversion on double numbers except for debugging. Convert floating point numbers to String format either with String.format, or with a DecimalFormat object. Either gives you proper control over the format.

When looking at my Itunes songs that I have purchased and imported from CD, every song has an exclamation point next to it and says it can't be found. Why? and how do i fix it?

all of my songs in itunes have exclamation points next to them - why?

Hi Paula!
The exclamation points are due to iTunes not being able to find your music. This can be caused from either music being deleted from the computer or if the music folder has changed locations.
iTunes does not actually store the music in the program. All music is saved on the hard drive of your PC. iTunes just creates a link to their location and if that link is broken the exclamation points appear.
I see you're using a windows computer, the best way to locate these songs and add them back in to iTunes is to search for them.
You can click on your start menu, then in the search field type either the title of a particular song or .M4P
This should locate the music for you. Once you locate all the music or the one in particular you can right click on it and select properties. In properties you will be able to see the location.
An example of a location is, C:User Name/Documents and Settings/Music/iTunes/iTunes Media
Once you have that location you can go back to iTunes, click on a song with an exclamation, it will ask you if you would like to locate the file. Say yes and then direct the path to that song and after you select the appropriate song for that 1 file iTunes will ask you if you would like it to locate the other songs that are missing. Just say yes and your library will be back!

Fixed point division on FPGA doesn't show the fraction part

Hi,
I'm trying to normalize a fixed-point complex vector. My problem is in the part of fixed point division. Assuming I am dividing x by y (x/y), then I multiply first x by 2^26 and y by 2^9 then divide both of them using high throughput function then multiply the result by 2^-17 and here the problem appears. The result is zero, and the fraction part doesn't appear. My question is: does the "scale by power of 2" block discards the fraction part and only keeps the integer part, even if the input is a fixed point input with fraction part of 20 bits length? If so then how can I get the result of dividing a number by a bigger one? I mnean how can I display a result < 1? If not, then why isn't the fraction part displayed? The numbers I used as an example are: x=10, y=182.
The indicator is adjusted to have 64 bit word length and 44 integer length. I also write this data into a memory element and then read it through a FIFO to transfer it to the RT vi. Both of the memory and the FIFO are configured with the same word and integer lengths above. I am using 7965R series FPGA.
Thanks in advance.

It's worth noting that I tried this same procedure on RT vi itself and the fraction part was displayed.

Why does my computer display a spring coloured wheel that stops me from doing anything

Why does my computer display a spinning coloured wheel that stops me from doing anything, the only way to get rid is to switch off and reload...

These instructions must be carried out as an administrator. If you have only one user account, you are the administrator.
Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad and start typing the name.
Step 1
For this step, the title of the Console window should be All Messages. If it isn't, select
          SYSTEM LOG QUERIES ▹ All Messages
from the log list on the left. If you don't see that list, select
          View ▹ Show Log List
from the menu bar at the top of the screen.
In the top right corner of the Console window, there's a search box labeled Filter. Initially the words "String Matching" are shown in that box. Enter "BOOT_TIME" (without the quotes.)
Each message in the log begins with the date and time when it was entered. Select the BOOT_TIME log message that corresponds to the last boot time when you had the problem. Now clear the search box to reveal all messages. Select the ones logged before the boot, during the time something abnormal was happening. Copy them to the Clipboard by pressing the key combination command-C. Paste into a reply to this message by pressing command-V.
For example, if the system was unresponsive or was failing to shut down for three minutes before you forced a restart, post the messages timestamped within three minutes before the boot time, not after. Please include the BOOT_TIME message at the end of the log extract—not at the beginning.
If there are long runs of repeated messages, please post only one example of each. Don’t post many repetitions of the same message.
When posting a log extract, be selective. A few dozen lines are almost always more than enough.
Some private information, such as your name, may appear in the log. Anonymize before posting.
Please don't indiscriminately dump thousands of lines from the log into this discussion.
Please don't post screenshots of log messages—post the text.
Step 2
In the Console window, select
          DIAGNOSTIC AND USAGE INFORMATION ▹ System Diagnostic Reports
(not Diagnostic and Usage Messages) from the log list on the left. If you don't see that list, select
          View ▹ Show Log List
from the menu bar.
There is a disclosure triangle to the left of the list item. If the triangle is pointing to the right, click it so that it points down. You'll see a list of reports. A crash report has a name that begins with the name of the crashed process and ends in ".crash". A panic report has a name that begins with "Kernel" and ends in ".panic". A shutdown stall report has a name that ends in ".shutdownstall". Select the most recent of each, if any. The contents of the report will appear on the right. Use copy and paste to post the entire contents—the text, not a screenshot. It's possible that none of these reports exists.
I know the report is long, maybe several hundred lines. Please post all of it anyway.
If you don't see any reports listed, but you know there was a crash or panic, you may have chosen Diagnostic and Usage Messages from the log list. Choose DIAGNOSTIC AND USAGE INFORMATION instead.
In the interest of privacy, I suggest that, before posting, you edit out the “Anonymous UUID,” a long string of letters, numbers, and dashes in the header of the report, if it’s present (it may not be.)
Please don’t post other kinds of diagnostic report—they're very long and rarely helpful.

Why teststand can not display the ASCII character which number up to 128?

Hello All,
        I have encountered a problem on an application for ASCII character,why teststand can not display the ASCII character which number up to 128?
       For example:an expression Local.xx=Chr(164),
       xx-->string,I can not get the correct string.
       Have any idea for this?
OS:WinXP,Teststand2012 SP1.
       Thanks a lot.
Solved!
Go to Solution.

dug9000 wrote:
[...]On Windows 7 at least, the code page setting for the operating system is located in the "Region and Language" control panel in the "Administrative" tab where it says "Language for non-Unicode programs".
Hope this helps,
-Doug
Ah, that explains why i see "European Set"....
One question, Doug: Obviously, you can select only the localization there. Is this PostScript Characters for all languages? Or is it possible to switch to something like true types, e.g. "Wingdings"? (I know, bad example, but i hope you get the point)
thanks,
Norbert
CEO: What exactly is stopping us from doing this?
Expert: Geometry
Marketing Manager: Just ignore it.

Why do paid Apple employees earn forum points & rankings?

Why do paid Apple employees earn forum points & rankings? I thought the points system was "to increase community participation". Giving points to people paid to be here and putting them in the rankings runs counter to that intent.

Hi, Jason -
No, I'm talking about the people with the silver Apple badges whose profiles say they're Apple employees.
At least some of them are paid to be in here, maybe others aren't and just come in here to be helpful on their own time, I guess I don't know. If you're paid, you don't need encouragement.
The only Apple employees who are paid to be here as their primary job function are the Hosts, the ones who display the purple apple badge.
Other Apple employees may post here. Usually it is on their own time, at which time they may or may not identify themselves as being an Apple Employee - if they do, they then display the silver apple badge.
On rare occasions Apple employees may post in an official capacity in order to address a specific need, but (historically, at least) this does not occur on a regular basis.
Yikes, I'd assume a company employee could provide useful info on the company's products. If an Apple employee doesn't give useful info...I hope that's someone who isn't working at Apple for long.
Apple has a broad and diverse enough product line that no one employee can possibly know it all.
Since most of the time a person who is identified as an Apple employee is posting on their own time, I see nothing wrong with thanking them the same way anyone else would be thanked.

Why doesn't nsroledn display in an entry search?

I dont understand why nsroledn does not display in a search result for an entry. I can search on an nsroledn value in entries, but when I look at an entry itself I don't see the nsroledn attribute. Yes I can see it in the console, but it would offer so much functionality when looking at an entry with ldapsearch to see its roles. I thought that was the whole point of using roles instead of groups, because you could look at an entry and see its' roles.

Because nsRoleDN is an operational attribute...ie it is only returned if you specifically ask for it.
To retrieve all attributes plus the nsRoleDN, specify the following list of attributes : "*" nsRoleDN
Regards,
Ludovic.

Why is the hour display set to 19 when I run the attached VI

Why is the hour display set to 19 when I run the attached VI?
Thank you.
Solved!
Go to Solution.
Attachments:
Untitled 1.vi ‏10 KB

Are you in US Eastern Time? This looks like an offset due to time zone (EST is -5 hours). Setting the UTC constant to TRUE will fix that.
There are only two ways to tell somebody thanks: Kudos and Marked Solutions
Unofficial Forum Rules and Guidelines

Why do not Apple send a fix for all fail´s / slow mac`s afther upgrade to Yosemite

I have upgrade 2 of my Macbook air 11" models. Both have major slow functionality in allmost every programs. slow mail, safari, pages. Allmost nothing of the funksjonalitys can being uses in numbers. Slow functionality when jumping between programs. Allover i have BIG problems with mac for my first time. And why do not Apple send a fix for all fails there is after upgrading to Yosemite. When thousand of users have the same problem with major slow mac`s.
Here is a test for my mac.
EtreCheck version: 2.1 (101)
Report generated 4. desember 2014 kl. 22.48.33 CET
Hardware Information: ℹ️
MacBook Air (Verified)
MacBook Air - model: MacBookAir6,1
1 1.7 GHz Intel Core i7 CPU: 2-core
8 GB RAM Not upgradeable
BANK 0/DIMM0
4 GB DDR3 1600 MHz ok
BANK 1/DIMM0
4 GB DDR3 1600 MHz ok
Bluetooth: Good - Handoff/Airdrop2 supported
Wireless: en0: 802.11 a/b/g/n/ac
Video Information: ℹ️
Intel HD Graphics 5000 -
Color LCD 1366 x 768
System Software: ℹ️
OS X 10.10.1 (14B25) - Uptime: 0:12:8
Disk Information: ℹ️
APPLE SSD SM0512F disk0 : (500,28 GB)
S.M.A.R.T. Status: Verified
EFI (disk0s1) <not mounted> : 210 MB
Recovery HD (disk0s3) <not mounted> [Recovery]: 650 MB
Macintosh HD (disk1) / : 496.30 GB (371.41 GB free)
Core Storage: disk0s2 499.42 GB Online
USB Information: ℹ️
Apple Inc. BRCM20702 Hub
Apple Inc. Bluetooth USB Host Controller
Thunderbolt Information: ℹ️
Apple Inc. thunderbolt_bus
Gatekeeper: ℹ️
Mac App Store
Kernel Extensions: ℹ️
/Applications/Parallels Access.app
[not loaded] com.parallels.virtualsound (1.0 18 - SDK 10.6) [Support]
/Applications/Parallels Desktop.app
[not loaded] com.parallels.kext.hypervisor (10.1.1 28614 - SDK 10.7) [Support]
[not loaded] com.parallels.kext.netbridge (10.1.1 28614 - SDK 10.7) [Support]
[not loaded] com.parallels.kext.usbconnect (10.1.1 28614 - SDK 10.7) [Support]
[not loaded] com.parallels.kext.vnic (10.1.1 28614 - SDK 10.7) [Support]
/Library/Application Support/Kaspersky Lab/KAV/Bases
[not loaded] com.kaspersky.kext.kimul.38 (38) [Support]
/Library/Extensions
[loaded] com.silex.driver.sxuptp (1.10.9 - SDK 10.8) [Support]
/System/Library/Extensions
[not loaded] com.devguru.driver.SamsungComposite (1.2.61 - SDK 10.6) [Support]
[not loaded] com.freecom.driver.BoulderScsi (1.0.0d1) [Support]
[not loaded] com.kaspersky.kext.klif (2.2.1d19) [Support]
[not loaded] com.zg.driver.ZGUSBCDCACMData (1.5) [Support]
[not loaded] com.zg.driver.ZGUSBMassStorageFilter (1.5) [Support]
[not loaded] com.zg.driver.cdc_ecm_qmi (1.9) [Support]
[not loaded] com.zg.driver.cdc_usb_bus (1.9) [Support]
/System/Library/Extensions/ssuddrv.kext/Contents/PlugIns
[not loaded] com.devguru.driver.SamsungACMControl (1.2.61 - SDK 10.6) [Support]
[not loaded] com.devguru.driver.SamsungACMData (1.2.61 - SDK 10.6) [Support]
[not loaded] com.devguru.driver.SamsungMTP (1.2.61 - SDK 10.5) [Support]
[not loaded] com.devguru.driver.SamsungSerial (1.2.61 - SDK 10.6) [Support]
Launch Agents: ℹ️
[running] com.brother.LOGINserver.plist [Support]
[loaded] com.google.keystone.agent.plist [Support]
[loaded] com.oracle.java.Java-Updater.plist [Support]
[running] com.parallels.mobile.prl_deskctl_agent.launchagent.plist [Support]
Launch Daemons: ℹ️
[loaded] com.adobe.fpsaud.plist [Support]
[loaded] com.google.keystone.daemon.plist [Support]
[failed] com.kaspersky.kav.plist [Support] [Details]
[loaded] com.macpaw.CleanMyMac2.Agent.plist [Support]
[loaded] com.oracle.java.Helper-Tool.plist [Support]
[loaded] com.oracle.java.JavaUpdateHelper.plist [Support]
[running] com.parallels.mobile.dispatcher.launchdaemon.plist [Support]
[failed] com.parallels.mobile.kextloader.launchdaemon.plist [Support] [Details]
User Launch Agents: ℹ️
[running] ca.indev.MailTagsHelper.agent.plist [Support]
[loaded] com.facebook.videochat.[redacted].plist [Support]
[loaded] com.genieo.completer.download.plist Adware! [Remove]
[loaded] com.genieo.completer.ltvbit.plist [Support]
[running] com.genieo.completer.update.plist Adware! [Remove]
[not loaded] com.macpaw.CleanMyMac.helperTool.plist [Support]
[not loaded] com.macpaw.CleanMyMac.trashSizeWatcher.plist [Support]
[not loaded] com.macpaw.CleanMyMac.volumeWatcher.plist [Support]
[loaded] com.macpaw.CleanMyMac2Helper.diskSpaceWatcher.plist [Support]
[loaded] com.macpaw.CleanMyMac2Helper.scheduledScan.plist [Support]
[loaded] com.macpaw.CleanMyMac2Helper.trashWatcher.plist [Support]
[loaded] com.parallels.mobile.startgui.launchagent.plist [Support]
User Login Items: ℹ️
iTunesHelper ProgramHidden (/Applications/iTunes.app/Contents/MacOS/iTunesHelper.app)
fuspredownloader ProgramHidden (/Users/[redacted]/Library/Application Support/.FUS/fuspredownloader.app)
Internet Plug-ins: ℹ️
JavaAppletPlugin: Version: Java 7 Update 71 Check version
FlashPlayer-10.6: Version: 15.0.0.239 - SDK 10.6 [Support]
Default Browser: Version: 600 - SDK 10.10
NP_2020Player_IKEA: Version: 5.0.94.1 - SDK 10.6 [Support]
Flash Player: Version: 15.0.0.239 - SDK 10.6 [Support]
QuickTime Plugin: Version: 7.7.3
nplastpass: Version: 3.1.61 [Support]
JavaPlugin2_NPAPI: Version: Unknown
Silverlight: Version: 5.1.30514.0 - SDK 10.6 [Support]
iPhotoPhotocast: Version: 7.0
userinternetplugins ℹ️
Google Earth Web Plug-in: Version: 7.1 [Support]
Safari Extensions: ℹ️
Facebook Cleaner
Pin It Button
LastPass
ResizeMe
OpenIE
3rd Party Preference Panes: ℹ️
Cineform [Support]
Flash Player [Support]
Java [Support]
Time Machine: ℹ️
Mobile backups: ON
Auto backup: YES
Volumes being backed up:
Macintosh HD: Disk size: 496.30 GB Disk used: 124.90 GB
Destinations:
Data [Network]
Total size: 3.00 TB
Total number of backups: 65
Oldest backup: 2013-08-15 20:20:51 +0000
Last backup: 2014-12-04 17:20:31 +0000
Size of backup disk: Excellent
Backup size 3.00 TB > (Disk size 496.30 GB X 3)
Top Processes by CPU: ℹ️
     4% WindowServer
     1% fontd
     1% cloudd
     0% Safari
     0% launchd
Top Processes by Memory: ℹ️
369 MB com.apple.WebKit.WebContent
155 MB Safari
103 MB Feedback Assistant
86 MB Finder
69 MB mds_stores
Virtual Memory Information: ℹ️
4.52 GB Free RAM
2.60 GB Active RAM
652 MB Inactive RAM
820 MB Wired RAM
1.04 GB Page-ins
0 B Page-outs
Diagnostics Information: ℹ️
Dec 4, 2014, 10:37:00 PM Self test - passed

[loaded] com.genieo.completer.download.plist Adware! [Remove]
[loaded] com.genieo.completer.ltvbit.plist [Support]
[running] com.genieo.completer.update.plist Adware! [Remove]
[not loaded] com.macpaw.CleanMyMac.helperTool.plist [Support]
[not loaded] com.macpaw.CleanMyMac.trashSizeWatcher.plist [Support]
[not loaded] com.macpaw.CleanMyMac.volumeWatcher.plist [Support]
[loaded] com.macpaw.CleanMyMac2Helper.diskSpaceWatcher.plist [Support]
[loaded] com.macpaw.CleanMyMac2Helper.scheduledScan.plist [Support]
[loaded] com.macpaw.CleanMyMac2Helper.trashWatcher.plist [Support]
Your machine is slow because you loaded a bunch of third party junk on it.

Why is "x2^0" Displayed on Fixed point numbers in hex format

Similar Messages

Maybe you are looking for