Why is YYYYMM date in flat file coming out in Preview as YYMMYY ?

Hi,
The date in the flat file is 200707 but when previewed, it comes up as 070720
I previewed a previous successful load and the data in the preview was 200706. I then copied the row and pasted it in Excel and saved as .CSV and then previewed this newly saved file. But again, Preview gave the year month as 070620
Remember that this was in 200706 in the preview and copied and pasted in the new file, but now the preview does not give200706.
The only change is that the system has recently been updated from BW to Netweaver.
In brief, this is what is happening:
200706 --> 070620
200707 --> 070720
That is the "20" in "2007" moves to the end of the month.
Any help?
Thanks

Hi Amanda Baah,
This problem occures because of user format and BI internal format for dates. Please use standard formulae in tranformation to change user format into BI internal format and then your problem will be resolved. Once you go to formulae in transformation you can see many standard formulae for Dates, pick one of them suitable for you and set format. It is simple to use as you can define format in user editable fields there, you need not to code there, just add formats desired.
Assign points if it resolves you problem.

Similar Messages

Data source doesn't show porper data while flat file data loading

Hi Experts,
I am trying to load data from flat file for info object 0GL_ACCOUNT. I have created an application component and data source.
My question is after loading text data in the corresponding data source, it shows only few characters of the actual data.
For Ex. in my original data i have G/L account name "Comp Hardware Purchase" but after loading into the data source it shows only "Comp Hardwa".
I want to show the whole name "Comp Hardware Purchase ". I know there is some text length problem but i couldn't find it. What steps i need to follow?
Please help.
Full points will be given to the useful answers ****
Thanks and Regards,
Niranjan Chechani

HI Niranjan,
Go to your data source and check whether the field and infoobject are having the same lenght. If the infoobject lenght is less than your field lenght wihc is coming from Flat file then such issue occur.
Search for your flatfile datasource and and doubel clik on the datasource and check the fileds tabs, there you will have the mapping or you can also check your Transfer or Update rules of the target.
Regards,
Nanda.S

Wrong century for the dates from flat file

I am in the process of uploading the data from flat file ( aka CSV) into oracle via external table .
All the dates have the year of 20xx. My understanding was 51-99 will be prefixed with 19 ( such as 1951 - 1999) and 00-50
will be prefixed with 20 ( such as 2004 ... )
The column below ( startdate ) is of timestamp .
Is my understanding wrong ?
SQL> select startdate , to_date(startdate , 'dd/mm/yyyy' ) newdate from tab;
NEW_DATE STARTDATE
09/18/2090 18-SEP-90 12.00.00.000000000 AM
BANNER
Oracle Database 11g Enterprise Edition Release 11.1.0.7.0 - 64bit Production
PL/SQL Release 11.1.0.7.0 - Production
CORE 11.1.0.7.0 Production
TNS for 64-bit Windows: Version 11.1.0.7.0 - Production
NLSRTL Version 11.1.0.7.0 - Production
SQL> show parameter nls
NAME TYPE VALUE
nls_calendar string
nls_comp string BINARY
nls_currency string
nls_date_format string
nls_date_language string
nls_dual_currency string
nls_iso_currency string
nls_language string AMERICAN
nls_length_semantics string BYTE
nls_nchar_conv_excp string FALSE
nls_numeric_characters string
nls_sort string
nls_territory string AMERICA
nls_time_format string
nls_time_tz_format string
nls_timestamp_format string
nls_timestamp_tz_format string
SQL>
SQL>

Offense . None taken ...
I literally typed the sql ( as I did not copy & paste SQL / resultsets ) . I did use to_char in my original sql . I don't want to expose the real table . thats why I was giving the made up test case. If you carefully the SQL and the equivalent result sets ... you would have noticed .
Here is the SQL used ( of course , I have changed the table name ) ...
select to_char(startdate , 'mm/dd/yyyy') sdate, startdate from t
SDATE STARTDATE
09/18/2090 18-SEP-90 12.00.00.000000 AM
The flatfile had the value of 091890 as the data .

How can I get data in flat file from Pool table and cluster table ?

Hi,
I am working in one Achiving project. My requirement is to get data into flat file from Cluster table and pool table.
Is there any tool avilable to download data into flat file from pool table and cluster table ?
if table name given in the selection screen then data will be downloaded into flat file.
waiting for quick response.
Best Regards,
Bansidhar

Data cannot be retrived directly form the cluster table
as the Cluster results are stored in Cluster Key say for example PCLkey
and form that Key we need to fetch the data
these clustes are not the part of PNP or PNPCE tables
for ur info kindly check

How to upload data from flat file to datastore object in BI 7.0

Dear friends,
Please tell me
step by step process for upload data from flat file to datastore object in BI 7.0
<removed by moderator>
please help me
Thanks,
D.prabhu
Edited by: Siegfried Szameitat on Aug 17, 2011 11:40 AM

Create transformation on thr data source and keep the DSO as the target and load.
Ravi Thothadri

Data Source creation for Master Data from Flat File to BW

Hi,
I need to upload Master Data from Flat File. Can anybody tell step by step right from begining of creation of DataSource up to Loading into Master Data InfoObject.
can any body have Document.
Regards,
Chakri.

Hi,
This is the procedure.
1. Create m-data with or without attributes.
2. Create infosource .
    a) with flexible update
         or
    b) with direct update
3. Create transfer rules and assign tyhe names of m-data and attribute in "Transfer rules" tab and transfer them to communication structure.
4. Create the flat-file with same stucture as communication structure.
5. if chosen direct update then create infopackage and assign the name of flat-file and schedule it.
6. if chosen flexible update the create update rule with assigning name of the infosource and the schedule it by creating infopackage.
Hope this helps. If still have prob then let me know.
Follow this link also.
http://help.sap.com/saphelp_nw2004s/helpdata/en/b2/e50138fede083de10000009b38f8cf/frameset.htm
Assign points if helpful.
Vinod.

How often in the real time projects extract data from flat files n process

I am going thru teh BODS data integrator, and trying to understand the demand of ETL services extract data from a flat file, is that really impt in teh real time jobs.
Thank you very much for the helpful info.

Hi,
As per the inputs given by you guys i started loading data from flat file.
I try to load 28 files from i which i was able to load 24 files succesfully.For the other 4 i got this error messages
1) Error 'Enter period in the format __.YYYY...' at conversion exit CONVERSION_EXIT_PERI6_INPUT (field CALMONTH record 1, value DUMYTRA)
Message no. RSDS012
2) a) Error 'The argument '1,008.00' cannot be interpreted as anumber' on assignment field QUANT_B record 11714 value 1,008.00
Message no. RSDS013
b) Error 'The argument '1,110.00' cannot be interpreted as anumber' on assignment field QUANT_B record 15374 value 1,110.00
Message no. RSDS013
3) a) Error 'The argument '1,140.00' cannot be interpreted as anumber' on assignment field QUANT_B record 1647 value 1,140.00
Message no. RSDS013
b) Error 'The argument '2,028.00' cannot be interpreted as anumber' on assignment field QUANT_B record 4625 value 2,028.00
Message no. RSDS013
4) Error 'The argument '1,151.00' cannot be interpreted as anumber' on assignment field QUANT_B record 7808 value 1,151.00
Message no. RSDS013
I'am unable to trace out what is the error exactly.
I checked this values in files they are perfect.
can anybody please guide me on this issue.
With Regards,
Pradeep.B

How to create the Export Data and Import Data using flat file interface

Hi,
Request to let me know based on the requirement below on how to export and import data using flat file interface.....
Please provide the steps involved for the same.......
BW/BI - Recovery Process for SNP data.
For each SNP InfoProvider,
create:
1) Export Data:
1.a) Create an export data source, InfoPackage, comm structure, etc. necessary to create an ASCII fixed length flat file on the XI
ctnhsappdata\iface\SCPI063\Out folder for each SNP InfoProvider.
1.b) All fields in each InfoProvider should be exported and included in the flat file.
1.c) A process chain should be created for each InfoProvider with a start event.
1.d) If the file exists on the target drive it should be overwritten.
1.e) The exported data file name should include the InfoProvider technical name.
1.f) Include APO Planning Version, Date of Planning Run, APO Location, Calendar Year/Month, Material and BW Plant as selection criteria.
2) Import Data:
2.a) Create a flat file source system InfoPackage, comm structure, etc. necessary to import ASCII fixed length flat files from the XI
ctnhsappdata\iface\SCPI063\Out folder for each SNP InfoProvider.
2.b) All fields for each InfoProvider should be mapped and imported from the flat file.
2.c) A process chain should be created for each InfoProvider with a start event.
2.d) The file should be archived in the
ctnhsappdata\iface\SCPI063\Archive directory. Each file name should have the date appended in YYYYMMDD format. Each file should be deleted from the \Out directory after it is archived.
Thanks in advance.
Tyson

Here's some info on working with plists:
http://developer.apple.com/documentation/Cocoa/Conceptual/PropertyLists/Introduc tion/chapter1_section1.html
They can be edited with any text editor. Xcode provides a graphical editor for them - make sure to use the .plist extension so Xcode will recognize it.

Reading data from flat file Using TEXT_IO

Dear Gurus
I already posted this question but this time i need some other changes .....Sorry for that ..
I am using 10G forms and using TEXT_IO for reading data from flat file ..
My data is like this :-
0|BP-V1|20100928|01|1|2430962.89|27|2430962.89|MUR|20100928120106
9|2430962.89|000111111111|
1|61304.88|000014104113|
1|41961.73|000022096086|
1|38475.65|000023640081|
1|49749.34|000032133154|
1|35572.46|000033093377|
1|246671.01|000042148111|
Here each column is separated by | . I want to read all the columns and want to do some validation .
How can i do ?
Initially my requirement was to read only 2 or 3 columns so i did like this ...
Procedure Pay_Simulator(lfile_type varchar2,lac_no varchar2,lcur varchar2,lno_item number,ltotal number,ldate date,lpay_purp varchar2,lfile_name varchar2)
IS
v_handle utl_file.file_type;
v_filebuffer varchar2(500);
line_0_date VARCHAR2 (10);
line_0_Purp VARCHAR2 (10);
line_0_count Number;
line_0_sum number(12,2);
line_0_ccy Varchar2(3);
line_9_sum Number(12,2);
line_9_Acc_no Varchar2(12);
Line_1_Sum Number(12,2);
Line_1_tot Number(15,2) := 0;
Line_1_flag Number := 0;
lval number;
lacno varchar2(16);
v_file varchar2(20);
v_path varchar2(50);
Begin
v_file := mcb_simulator_pkg.GET_FILENAME(lfile_name); -- For the file name
v_path :=rtrim(regexp_substr( lfile_name , '.*\\' ),'\'); For the Path
v_path := SUBSTR (lfile_name,0, INSTR (lfile_name, '\', -1));
v_handle := UTL_FILE.fopen (v_path, v_file, 'r');
LOOP
UTL_FILE.get_line (v_handle, v_filebuffer);
IF SUBSTR (v_filebuffer, 0, 1) = '0' THEN
SELECT line_0 INTO line_0_date
FROM (SELECT LTRIM (REGEXP_SUBSTR (v_filebuffer, '[^|]+{1}', 1, LEVEL)) line_0, ROWNUM rn
FROM DUAL
CONNECT BY LEVEL <= LENGTH (REGEXP_REPLACE (v_filebuffer, '[^|]*')) + 1)
WHERE rn = 3;
SELECT line_0 INTO line_0_Purp
FROM (SELECT LTRIM (REGEXP_SUBSTR (v_filebuffer, '[^|]+{1}', 1, LEVEL)) line_0, ROWNUM rn
FROM DUAL
CONNECT BY LEVEL <= LENGTH (REGEXP_REPLACE (v_filebuffer, '[^|]*')) + 1)
WHERE rn = 4;
SELECT line_0 INTO line_0_count
FROM (SELECT LTRIM (REGEXP_SUBSTR (v_filebuffer, '[^|]+{1}', 1, LEVEL)) line_0, ROWNUM rn
FROM DUAL
CONNECT BY LEVEL <= LENGTH (REGEXP_REPLACE (v_filebuffer, '[^|]*')) + 1)
WHERE rn = 7;
SELECT line_0 INTO line_0_sum
FROM (SELECT LTRIM (REGEXP_SUBSTR (v_filebuffer, '[^|]+{1}', 1, LEVEL)) line_0, ROWNUM rn
FROM DUAL
CONNECT BY LEVEL <= LENGTH (REGEXP_REPLACE (v_filebuffer, '[^|]*')) + 1)
WHERE rn = 8;
SELECT line_0 INTO line_0_ccy
FROM (SELECT LTRIM (REGEXP_SUBSTR (v_filebuffer, '[^|]+{1}', 1, LEVEL)) line_0, ROWNUM rn
FROM DUAL
CONNECT BY LEVEL <= LENGTH (REGEXP_REPLACE (v_filebuffer, '[^|]*')) + 1)
WHERE rn = 9;
ELSIF SUBSTR (v_filebuffer, 0, 1) = '9' THEN
SELECT line_9 INTO line_9_Acc_no
FROM (SELECT LTRIM (REGEXP_SUBSTR (v_filebuffer, '[^|]+{1}', 1, LEVEL)) line_9, ROWNUM rn
FROM DUAL
CONNECT BY LEVEL <= LENGTH (REGEXP_REPLACE (v_filebuffer, '[^|]*')) + 1)
WHERE rn = 3;
SELECT line_9 INTO line_9_sum
FROM (SELECT LTRIM (REGEXP_SUBSTR (v_filebuffer, '[^|]+{1}', 1, LEVEL)) line_9, ROWNUM rn
FROM DUAL
CONNECT BY LEVEL <= LENGTH (REGEXP_REPLACE (v_filebuffer, '[^|]*')) + 1)
WHERE rn = 2;
ELSIF SUBSTR (v_filebuffer, 0, 1) = '1' THEN
line_1_flag := line_1_flag+1;
SELECT line_1 INTO line_1_sum
FROM (SELECT LTRIM (REGEXP_SUBSTR (v_filebuffer, '[^|]+{1}', 1, LEVEL)) line_1, ROWNUM rn
FROM DUAL
CONNECT BY LEVEL <= LENGTH (REGEXP_REPLACE (v_filebuffer, '[^|]*')) + 1)
WHERE rn = 3;
Line_1_tot := Line_1_tot + line_1_sum;
END IF;
END LOOP;
DBMS_OUTPUT.put_line (Line_1_tot);
DBMS_OUTPUT.PUT_LINE (Line_1_flag);
UTL_FILE.fclose (v_handle);
END;
But now how can i do ? Shall i use like this select Statement for all the columns ?

Sorry for that ..
As per our requirement ...
I need to read the flat file and it looks like like this .
*0|BP-V1|20100928|01|1|2430962.89|9|2430962.89|MUR|20100928120106*
*9|2430962.89|000111111111|*
*1|61304.88|000014104113|*
*1|41961.73|000022096086|*
*1|38475.65|000023640081|*
*1|49749.34|000032133154|*
*1|35572.46|000033093377|*
*1|246671.01|000042148111|*
*1|120737.25|000053101979|*
*1|151898.79|000082139768|*
*1|84182.34|000082485593|*
I have to check the file :-
Validation are 1st line should start from 0 else it should raise an error and insert that error into one table .
The for 2nd line also same thing ..it should start from 9 else it should raise an error and insert that error into one table .
Then the 3rd line should start from 1 else it should raise an error and insert that error into one table .
After that i have to do a validation like i will read the 1st line 2nd column .. It should be like this BP-V1 else raise an error and insert that error to a table . Then i will check the 3rd column which is 20100928 , it should be YYYYMMDD format else same thing ERROR.
Then like this for all columns i have different validation .......
Then it will check for the 2nd line 3rd column . this is an account no .1st i will check it should be 12 char else ERROR .Then I will check that what user has imputed in the form.Like for example User putted 111111111 then i will check with this 000111111111 which is there in the 2nd line . I have to add 000 before that Account no which user imputed .
Then the lines which is starting from 1 , i have to take all the 2nd column for all the lines which is starting from 1 and i have to do a sum . After that i have to compare that sum with the value in the 1st lines ( Starting from 0) 6th column . It should be same else ERROR ...
Then same way i have to count all the lines which is starting from 1 . Then i have to compare with the 7th column of 1st line . It should be same . Here in this file it should be 9.
MY CODE IS :-
Procedure Pay_Simulator(lfile_type varchar2,lac_no varchar2,lcur varchar2,lno_item number,ltotal number,ldate date,lpay_purp varchar2,lfile_name varchar2)
IS
v_handle TEXT_IO.file_type;
v_filebuffer varchar2(500);
line_0_date VARCHAR2 (10);
line_0_Purp VARCHAR2 (10);
line_0_count Number;
line_0_sum number(12,2);
line_0_ccy Varchar2(3);
line_9_sum Number(12,2);
line_9_Acc_no Varchar2(12);
Line_1_Sum Number(12,2);
Line_1_tot Number(15,2) := 0;
Line_1_flag Number := 0;
lval number;
lacno varchar2(16);
v_file varchar2(20);
v_path varchar2(50);
LC$String VARCHAR2(50) ;--:= 'one|two|three|four|five|six|seven' ;
LC$Token VARCHAR2(100) ;
i PLS_INTEGER := 2 ;
lfirst_char number;
lvalue Varchar2(100) ;
Begin
v_file := mcb_simulator_pkg.GET_FILENAME(lfile_name); For the file name
v_path :=rtrim(regexp_substr( lfile_name , '.*\\' ),'\'); For the Path
--v_path := SUBSTR (lfile_name,0, INSTR (lfile_name, '\', -1));
Message(lfile_name);
v_handle := TEXT_IO.fopen(lfile_name, 'r');
          BEGIN
                    LOOP
                    TEXT_IO.get_line (v_handle, v_filebuffer);
                    lfirst_char := Substr(v_filebuffer,0,1);
                    --Message('First Char '||lfirst_char);
                              IF lfirst_char = '0' Then
                              Loop
                              LC$Token := mcb_simulator_pkg.Split( v_filebuffer, i , '|') ;
                              Message('VAL - '||LC$Token);
                              lvalue := LC$Token;
                              EXIT WHEN LC$Token IS NULL ;
i := i + 1 ;
End Loop;
                              Else
                                   Insert into MU_SIMULATOR_output_ERR (load_no,ERR_CODE,ERR_DESC) values (9999,'0002','First line should always start with 0');
                                   Forms_DDL('Commit');
                                   raise form_Trigger_failure;
                              End if ;
                    TEXT_IO.get_line (v_handle, v_filebuffer);
                    lfirst_char := Substr(v_filebuffer,0,1);
                    LC$Token := mcb_simulator_pkg.Split( v_filebuffer, i , '|') ;
                    --Message('Row '||LC$Token);
                         IF lfirst_char = '9' Then
                              Null;
                         Else
                              Insert into MU_SIMULATOR_output_ERR (load_no,ERR_CODE,ERR_DESC) values (8888,'0016','Second line should start with 9');
                              Forms_DDL('Commit');
                              raise form_Trigger_failure;
                         End IF;
                    LOOP
                    TEXT_IO.get_line (v_handle, v_filebuffer);
                    lfirst_char := Substr(v_filebuffer,0,1);
                    LC$Token := mcb_simulator_pkg.Split( v_filebuffer, i , '|') ;
                    --Message('Row '||LC$Token);
                              IF lfirst_char = '1' Then
                              Null;
                              Else
                                   Insert into MU_SIMULATOR_output_ERR (load_no,ERR_CODE,ERR_DESC) values (7777,'0022','The third line onward should start with 1');
                                   Forms_DDL('Commit');
                                   raise form_Trigger_failure;
                              End if;
                    END LOOP;
                    --END IF;
                    END LOOP;
          EXCEPTION
               When No_Data_Found Then
          TEXT_IO.fclose (v_handle);
          END;
Exception
     When Others Then
     Message('Other error');
END;
I am calling the FUNCTION which you gave SPLIT as mcb_simulator_pkg.Split.

Idoc data in flat file structure

Dear Experts,
We have idoc data in flat file structure. We need to fetch it using ftp and map it to an idoc.
please tell me how to proceed .
Thanks,
Aju

Hi,
For flat file you need to use the File content conversion parameters.
Refer the blog,
SAP Network Blog: How to process flat files with multiple documents like POs, SOs etc. in a File to IDoc scenario
How to process flat files with multiple documents like POs, SOs etc. in a File to IDoc scenario
Thanks
Swarup

Loading data from flat file...

Hello,
I am actually experiencing a problem where I cant load data from a flat file into a table. I have actually reverse engineered the flat file into ODI. But the thing is I don't know how to load the data that is reversed into a RDBMS table. Added, I don't know how create this RDBMS table form within ODI to be reflected on the DB. Added, don't know how to load the data from the flat file onto this table without having to add the columns in order to map between the flat file and the table.
In conclusion, I need to know how to create an RDBMS table from within ODI on the database. And how to automatically map the flat file to the DB table and load the data into the DB table.
Regards,
Hossam

Hi Hossam,
We can used ODI procedure to create table in the DB.
Make sure you keep the column name in the table name same as the column name in FLAT FILE so that it can automatically map the column.
and regarding Loading data from FLAT File i.e. our source table is FLAT FILE till ODI 10.1.3.4 we need to manually insert the datastore since the file system cannot be reversed.
Please let me know Hossam if i can assis you further.
Thanks and Regards,
Andy

Loading transaction data from flat file to SNP order series objects

Hi,
I am an BW developer and i need to provide data to my SNP team.
Can you please let me know more about <b>loading transaction data (sales order, purchase order, etc.,) from external systems into order based SNP objects/structure</b>. there is a 3rd party tool called webconnect that gets data from external systems and can give data in flat file or in database tables what ever required format we want.
I know we can use BAPI's, but dont know how. can you please send any <b>sample ABAP program code that calls BAPI to read flat file and write to SNP order series objects</b>.
Please let me know ASAP, how to get data from flat file into SNP order based objects, with options and I will be very grateful.
thanks in advance
Rahul

Hi,
Please go through the following links:
https://forums.sdn.sap.com/click.jspa?searchID=6094493&messageID=4180456
https://forums.sdn.sap.com/click.jspa?searchID=6094493&messageID=4040057
https://forums.sdn.sap.com/click.jspa?searchID=6094493&messageID=3832922
https://forums.sdn.sap.com/click.jspa?searchID=6094493&messageID=4067999
Hope this helps...
Regards,
Habeeb
Assign points if helpful..:)

Problem in data sources for transaction data through flat file

Hello Friends,
While creating the data sources for transaction data through flat file, I am getting the following error "Error 'The argument '1519,05' cannot be interpreted as anumber' while assigning character to application structure" Message no. RSDS016
If any one come across this issue, please provide me the solution.
Thanks in Advance.
Regards
Ravi

Hallo,
just for information.
I had the same problem.
Have changed the field type from CURR to DEC and have set external instead of internal.
Then, the import with flatfile worked fine.
Thank you.

Can we cleanse and transform data at flat file or external table level?

Hi,
I have some data that I want to cleanse and transform. I don't want to cleanse it after i populate the external table, I want to get done with it at flat file level or while populating the external table. Can we cleanse and transform data at flat file or external table level through Oracle or OWB 11.2? Is it possible to run a conditional load (i.e. having a where clause or if-else-then) for an external table? Can we call oracle functions for an external table at the time of creation?
Thanks in advance.
Regards,
Ann.

Hi Oleg,
Thanks a lot for the clarification. :)
So is there a way that I can clease the data within the text file through Oracle or OWB? I have datatype mismatches in the data and most of my data is getting rejected because of that. The way I can think of, for solving this problem, is to create the external table with all fields with datatype varchar and then cleansing the data. But it doesn't seem very effecient plus it will get very complicated because I have almost 80-90 fields.
Any help?
Thanks and regards,
Ann.

Data convertion while exporting data into flat files using export wizard in ssis

Hi ,
while exporting data to flat file through export wizard the source table is having NVARCHAR types.
could you please help me on how to do the data convertion while using the export wizard?
Thanks.

Hi Avs sai,
By default, the columns in the destination flat file will be non-Unicode columns, e.g. the data type of the columns will be DT_STR. If you want to keep the original DT_WSTR data type of the input column when outputting to the destination file, you can check
the Unicode option on the “Choose a Destination” page of the SQL Server Import and Export Wizard. Then, on the “Configure Flat File Destination” page, you can click the Edit Mappings…“ button to check the data types. Please see the screenshot:
Regards,
Mike Yin
TechNet Community Support

Why is YYYYMM date in flat file coming out in Preview as YYMMYY ?

Similar Messages

Maybe you are looking for