Why not????? I het the ipod
plaese can any one hlep me what this issuo
why not the ipod do not show the arabic language ?
and song that write with arabic info donet disblay in
ipod lcd?
any one can anser this or hlep me ??
Arabic is not one of the supported languages for the iPod.
The supported languages are:
Languages: Czech, Danish, Dutch, English, Finnish, French, German, Greek, Hungarian, Italian, Japanese, Korean, Norwegian, Polish, Portuguese, Russian, Simplified Chinese, Spanish, Swedish, Traditional Chinese and Turkish
Additional language support for display of song, album and artist information: Bulgarian, Croatian, Romanian, Serbian, Slovak, Slovenian and Ukrainian
if you'd like to send feedback to Apple to ask them to add another language to the iPod operating system, you can do so here:
http://www.apple.com/feedback/ipod.html
Similar Messages
-
I've encoded a vinyl LP record into digital format and recorded it onto an usb as MP3 file. But when I tried to copy it onto my ipod classic, I get a message stating "was not copied to the ipod because it cannot be played on this ipod". Why?
I was refering to the "sample rate", normally 44.1 KHz, the iPod might not be able to play tracks with a non-standard rate. Otherwise I'm not sure what the issue might be.
tt2 -
Why does Apogee Jam not work with the Ipod Touch 4G
Hi,
I have a Apogge Jam an it works fine with my Mac Book, but it does not seem to be compatible with my Ipod Touch 4g.
Only the Gibbson L&M app recognize the Apogee Jam, but no other App (Ampkit, ....) :-((
With the IPhone 4 it shall work, can tell me anybody why Apogee Jam is not compatible with the Ipod Touch 4g (
although the Gibson-App works)?
Is there perhaps still other Apps which work with the Ipod Touch and Apogge Jam?
Thanks
MichaelI cannot answer the specifics, but I would guess it is a software issue because Griffin iTalk app will cooperate with the Apogee JAM on an iPod Touch 4g running iOS5. If this app can do it, then one would presume the other apps could be updated to do it also.
From last week up until yesterday, Apogee actually listed the 4G Touch as a compatible device with the JAM.
Apparently there was some confusion about Garageband now supporting iPod Touch and its functionality with JAM. -
Does anybody know why my ipod touch 3rd generations screen does not show anything? The screen is all black constantly. When I try to synchronise my ipod with my iTunes library it comes up with a message saying " iTunes could not back up the ipod because a session could not be started with the ipod. Please help and reply if you know an answer!!!
Try this previous discusssion:
https://discussions.apple.com/message/12518406#12518406 -
Why are the application in the apple store are not compatible with the iPod touch 4g? Apple please realize there are some of us who still have the iPod touch 4g! I just want to know.
Once I find the game i will truly screenshot that it states "not compatible for these models". I just find it RIDICULOUS that my iPod touch is in good condition and some of the applications that I want download sometimes are not compatible with my iPod touch 4g. I am not going to buy an ipod 5th generation if my 4g is still going strong since the year of 2010.
-
Why is it siri and panorama is not available in the ipod touch 4th gen in iOS update
why is it siri and panorama is not available in the ipod touch 4th gen in iOS update
Because the hardware does not support them.
-
Got error - Some of the videos in you library were not copied to the ipod becasue they cannot be played on this ipod. The videos were purchased from Itunes, so not sure how to fix this?
Hi JEG9,
If you are having issues transfering videos to your iPod Touch, you may find the following article helpful:
iTunes: May be unable to transfer videos to iPhone, iPad, or iPod
http://support.apple.com/kb/TS1497
Regards,
- Brenden -
Quicktime exported "Video format not supported by the iPod". Why?
Any help appreciated.
-I just downloaded new version of quick time 7.6.4, alongside iTunes 9.00, paid for Quick time Pro, entered the key code successfully and the Pro-only options of Quick Time become available.
-I exported my quicktime video files "movie to iPod". (File type m4v).
-Added file to iTunes library.
-When I sync my ipod (160GB "classic"), i get an error saying the "video format is not supported by the iPod". (I can watch downloads from the Itunes store without a problem.) It happens several times.
Any suggestions?
RSB-rock, Sorry for jumping in, into definitions of half empty or half full glass of water
MagnusX,
I feel your angst on the Apple Rep poor communication skills, we've been there too, so as end users, we try to help other like yourself who comes up against a brick wall.
Your iPod classic firmware 2.0.4 support the following video format
H.264 video, up to 1.5 Mbps, 640 by 480 pixels, 30 frames per second, Low-Complexity version of the H.264 Baseline Profile with AAC-LC audio up to 160 Kbps, 48kHz, stereo audio in .m4v, .mp4, and .mov file formats; H.264 video, up to 2.5 Mbps, 640 by 480 pixels, 30 frames per second, Baseline Profile up to Level 3.0 with AAC-LC audio up to 160 Kbps, 48kHz, stereo audio in .m4v, .mp4, and .mov file formats; MPEG-4 video, up to 2.5 Mbps, 640 by 480 pixels, 30 frames per second, Simple Profile with AAC-LC audio up to 160 Kbps, 48kHz, stereo audio in .m4v, .mp4, and .mov file formats
Most likely the resolution or bitrate doesn't fall into the supported Video spec.
If you are using a Mac, I suggest you download a free video converter, called handbrake
You can also Google for other version of the video convertor if you are using Windows. -
I purchasd an ITune Audio Book using a borrowed Windows Computer. After the Download I attempted to Sync and was told that I was synced to a different [something]. It then asked if I wanted to sync to this [Something] I said yes. IT wiped all the stuff off my IPod then gave the following message:
The [title] was not copied to the iPod [name] becuse you are not authorized for it on this computer.
How can I get this to work?
It considered the computer pretty acceptable when it took my money for the title. I think I have been ripped off.
THis whole SYNC is an innecessay step. Why can't I just download stuff to my iPod (from any sourch by the way) and delete it from my iPod when I don't want it any more.Hello LeaMinovitch,
Thanks for using Apple Support Communities.
For more information on this, take a look at:
iTunes Store: Authorize or deauthorize your Mac or PC
http://support.apple.com/kb/ht1420
To authorize a computer, follow these steps:
Open iTunes.
Choose Store > Authorize This Computer from the menu bar.
You may need to show the menu bar to see this option in Windows. In earlier versions of iTunes, you can access this option from the Advanced menu.
Enter your Apple ID and click Authorize.
If your Apple ID uses an expired MobileMe account, you can still authorize your computer.
In some cases, iTunes may ask you to authorize the computer again. iTunes should use the same authorization as before if the computer is in your list of authorized computers.
Learn what to do if iTunes repeatedly asks you to authorize when you try to play your content.
Best of luck,
Mario -
ITunes could not back up the iPod because the iPod disconnected
I had and solved a problem similar to the one reported by others: My iPod Touch 5 would not back up to iTunes. I was trying to update the iPod from iOS 8.1.3 to iOS 8.2 using iTunes on my PC and iTunes needed to back up the iPod before installing iOS 8.2. All of the attempts ended with the error message, "iTunes could not back up the iPod 'username' because the iPod disconnected."
I was finally able to update to iOS 8.2 directly from the iPod using wifi rather than through iTunes on my PC but the iPod still would not sync/backup with iTunes. (iTunes version 12.1.1.4 running under Windows 7 Pro (64 bit) SP1.) I tried a soft reset on the iPod; powering down and back up the PC; restarting iTunes; disconnecting and reconnecting the iPod. Nothing helped (I did not turn off my security software). The "Backup now" command and the "Sync" command in iTunes both resulted in the same error message as given above. "Sync via wifi" was NOT checked in iTunes. The backup file in the PC was renamed "Backup-Old," forcing iTunes to start a new file, but that didn't help either.
Finally, I discovered that Backup/Sync DID work if I started the Sync from the iPod using the "Sync Now" command in "iTunes Wi-Fi Sync" under the "General" section of "Settings." After doing a backup once that way, the backup via iTunes worked properly. I don't know why it worked that way but obviously some block has been cleared. This method might be added to the list of "things to try."
JeremyI have the same problem tonight for the first time. I restarted the iPod and my powerbook then used disk utilities to repair disk permissions then tried again. It got stuck on step 4 13 of 13 songs. Each time I try it gets a few more songs over before it freezes. Then I get an error message; Unknown sync error
0xE800400B.
While it is syncing the "s" on "slide to cancel" on the iPod screen is flashing. Finally iTunes freezes and I have to "force quit".
In previous tries the iPod turned off yet it still appeared on the list of devices in iTunes even after getting the "unknown error" message. -
Youtube Video Not Supported On The Ipod Touch
Hey recentley I have posted 3 videos on youtube and I tried watching them by using the YouTube app that I have on my ipod touch, but two of them say that its not supported on the ipod touch wich is 2nd generation! Why is that? Can somebody please help me!!!
As far as I can tell there's no way to do it... however, you can click on the mail icon, it'll create a new message with the full title as the subject line. From there you can cancel and go back to the video.
-
"Some of the items in the iTunes library were not copied to the iPod because they cannot be found....94 total problems"
I keep getting this everytime I plug in my iPod ....I really dont want to lose NINETY FOUR songs, as these are the most played ones! I don't know why it's doing this and its freakin annoying!
Can anybody PLEASE help me?????Thanks for the answer, but this is not a nano, it's a 5th gen 60GB wth video.
http://support.apple.com/kb/ht1353
Disk use is already enabled and I manually manage my music. -
Why is apple taking the iPod classic off the shelves
Why are they taking the iPod classic off the shelves.
Usually when a product line is discontinued it is due to low-volume of sales. Not enough demand to justify the investment in manufacturing.
-
When I upgraded to IOS5, my playlists no longer appear on the iPOD. When I do a Sync, the playlists appear, but will not sync to the iPOD. Any suggestions on how to resolve??
I would understand it if you checked email on your Mac, and then those messages were not available on your iOS devices if you had the advanced account setting "remove copy from server after retrieving message:" set to immediately.
I looked through my iPhone settings and don't even see an option to tell my phone to pull the only copy of a message and delete it from the server.
Possibly there is another setting in Lion (I am running Snow Leopard still) that tells your Mac to only synchronize mail to your iOs devices and is not pulling mail directly from iCloud.
You could try disabling your current iCloud email account in Mac Mail, and adding a new one and just telling Mail it is a standard IMAP account (imap.mail.me.com incoming and smtp.mail.me.com outgoing).
I did that for Leopard to get my email even to work after MobileMe is cancelled and it seems to work fine with my iPhone.
If that doesn't work, you can delete that new email account and re-enable the temporarily disabled iCloud email account from above.
Hope this helps. -
i am syncing my ipod but it comes up with a error saying itunes could not backup the ipod because the backup was corrupt or not compatible with the ipod, what do i do?
As I said the iTunes program on the computer. You open iTunes on the computer and go to the View menue in the upper rightand then click on preferences. Go to Devices and delete the backup.
-
My Ipod Touch is disabled and when I connect to Itunes to recover it, it states that itiTunes could not connect to the iPod touch “iPod touch” because it is locked with a passcode. You must enter your passcode on the iPod touch before it can recover.
Place the iOS device in Recovery Mode and then connect to your computer and restore via iTunes. The iPod will be erased.
iOS: Forgot passcode or device disabled
If recovery mode does not work try DFU mode.
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
For how to restore:
iTunes: Restoring iOS software
To restore from backup see:
iOS: Back up and restore your iOS device with iCloud or iTunes
If you restore from iCloud backup the apps will be automatically downloaded. If you restore from iTunes backup the apps and music have to be in the iTunes library since synced media like apps and music are not included in the backup of the iOS device that iTunes makes.
You can redownload most iTunes purchases by:
Downloading past purchases from the App Store, iBookstore, and iTunes Store
If problem what happens or does not happen and when in the instructions? When you successfully get the iPod in recovery mode and connect to computer iTunes should say it found an iPod in recovery mode.
Maybe you are looking for
-
ever since i put my songs off my phone onto my laptop to then transfer onto my iPod i have been having serious difficulty with my phone, i cant receive pictures, voice notes and cannot download music. i have tried everything, i have deleted blackberr
-
Gigabit ethernet + TC doesn't mean gigabit transfer rates to the TC drive..
Alright.... I've spent a ton of time trying to figure this out (probably more than I should have) and I thought I'd post my findings so that either a) I'll save someone else time out there or b) someone can tell me I'm a complete moron So I had an ai
-
How to use multiple Spry Data Sets in one page
I'm using two spry data sets in one page. When I add the first spry data set to my page everything runs OK, When I add the second spry data set to the page the first data set stops working. Does anyone know what the problem is? This is how I have my
-
How to Generate and Display SVG Graphics in ABAP
Hi everybody, I tried to complete the Tutorial "How to Generate and Display SVG Graphics in ABAP, Part 1" by Siarhei Ulasenka (https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/ad83a990-0201-0010-d680-a189f8bc20fa). Unfortunately wh
-
Having trouble setting the look and feel
hi, i've almost finished my app and am trying to improve it's appearance. I'm trying to change the look and feel but i can't seem to get any changes to take effect. i've been reading through the tutorial on L&F but obviously am not 'getting' somethin