Why same custom designed item looks different on different MIDP phones?

Same MIDP application looks different on different phones, which is obvious. But the sizes of custom items are also looks different, which is some thing trouble some. IE the custom designed button of size say 50 X 20, looks proper on BlackBerry MIDP phone, but same button looks very small [cant even recognize] on Nokia MIDP phone. Why it is so?
Is there any way to design items as per the phone dimensions? Regards.
Note: I want to get standard item size, font size etc. so that I can use them directly. In this case on every device the designed items will look proper
Edited by: nikhil_shravane on Aug 21, 2010 04:27 AM

The look depends on mainly three things, the screen size, screen resolution and dpi. Although dpi is related to the ration of screen size and screen resolution. If the dpi is higher, the same image or item will look smaller than from a device which has a lower dpi. Like the iPhone and BB Bold both has almost identical screen resolution, however Bold has a higher dpi so the same image or a html page looks smaller on Bold than it is in iPhone.
Regards,
SD

Similar Messages

  • Maintain same customer number twice with different GUIDs

    Recently, R3 refreshed, but CRM not. After refresh R3 is having few customer & product numbers, which were same as earlier. That means those customers & products already exist in CRM. I run initial load for customizing & master data from R3 to CRM.
    Now, I can see existing product number can be downloaded from R3 & result is same product number present twice in CRM with different GUIDs.
    For customer, I am not able to download existing  customer number via initial load. I am getting mapping error & error description - "Customer number EKC3137 is already assigned to a business partner". Delta load also failed for same customer with error - "Business partner with GUID 15ECAD322FDA074BB8B125DEDB4194DB does not exist". I checked & found existing entry in CRM is having different GUID for this customer.
    Can anyone suggest how to download this customer with new GUID, keeping same customer with different GUID. This means expected result is same customer number maintained twice with two different GUIDs. Definitely old customer can not be updated from R3, but new one can be updated in future.
    Regards,
    Soumya

    Hi.
    Everytime you do a not simultaneous client copy you will get this inconsistencies on middleware data.
    You can correct this as described below:
    CUSTOMERS:
    Apply note 609766 in order to create a report that will correct the customers Guids on tables: R/3: CRMKUNNR  and CRM: CRMM_BUT_CUSTNO  .
    MATERIAL:
    R/3 table that contains CRM product guid: NDBSMATG16
    CRM table: COMM_PRODUCT
    SAP recomends to delete all products and replicate them again: COM_PRODUCT_DELETE_SINGLE
    Possible problem if you also have price condition tables on CRM (the product Guids will be the old ones so yoiu will have to download all pricing data again).
    CONTACT PERSONS:
    R/3: CRMPARNR
    CRM: CRMM_BUT_CONTNO
    Apply note 703322  and run report  Z_OSS_000400_2004 on R/3 and corrects the inconsistencies.
    Regards.
    Susana Messias

  • Profit Center in Customer Line Item

    Hi SDN,
    We have created a validation during posting of Sp Gl transactions for both Vendor or Customer. This validation mandates the profit center in the Vendor/Customer line item to ensure that a profit center will be derived even for documents with purely balance sheet items (e.g. Dr AR     Cr Bank Inc Clearing)
    We were successfull in bringing out the profit center in the vendor line item (for Special GL transactions)
    However, for customer special GL transactions, we did the same settings as with the vendor settings (updated FSG and posting key to activate profit center)  but system does not show profit center field for customer sp GL transactions.
    Any idea as to why only customer line item does not reflect the profit center while the vendor line item shows it?
    Thanks

    Hi,
    What is the special GL indicator account  type?
    Have you changed the FSG settings for special GL account?
    Rgds
    Murali. N

  • How can i clear the vendor and customer open line items at a time same vendor as a customer of the company (same vendor same customer and equal invoices )

    my vendor and customer are same . purchase invoice due100000 and sales invoice amount is also 100000 at a time with any manual action , have any setting for cleared both vendor and customer line items at a time ...........

    X Ltd. will be Vendor & Customer.
    Purchase Invoice is booked under Vendor SAP number & Sales Invoice is booked under Customer SAP number. Then you can transfer amount from Vendor to Customer or vice versa with T-code F-04.
    Then if you have transferred amount from customer to Vendor (F-04), Vendor account will have two entries Debit & Credit. Then go for clearance with T-code F-44 clear Vendor.

  • Why does images in preview are in a different position and resolution than in design view? In design view I have to place the images of screen to fit in preview.

    Why does images in preview are in a different position and resolution than in design view? In design view I have to place the images of screen to fit in preview.

    Already changed in different settings. Here is a screenshot when set to "Original Size".

  • How to manage credit for same customer in different sectors

    Dear Gurus,
    Here is the scenario,
    My client   have four different sectors but a customer can buy from multiple sectors.The credit management for the same customer must be handled  differently for each sector.The credit exposure for all sectors should be different
    So how can we segregate this in sap credit management for only one customer master
    Regards,
    Sam Ahmed

    Credit Control Area Is set at 2 places:
    - @ Company Code (OBZK)
    - @ Sales Area (OVFL)
    You need to have different Credit Control Area based on your requirement, align with the sales areas you want differentiate. 
    To do so, follow IMG in following path or use TCode OVFL.
    SPRO - Enterprise Structure - Assignment - Sales & Distribution - Assign Sales Area to Credit control area
    Also, make sure in
    - Customer Master (XD02) for the desired sales areas you need specify the credit control area in the sales area data.
    - And in FD32, maintain different credit limit based on Customer & Credit Control Area.
    For reference you can refer consulting for configuration SAP Note 18613 - Checklist for Credit Management.
    And SAP Note 425483 - Consulting note collection: Credit checks.
    With Best Wishes
    JP

  • Invoice Split for same customer but for different output types

    Hi Gurus,
    I have a requirement from the customers. A new output type has to be created with reference to the old type and for this output type a new driver program and SAP script was created with reference to the old one.They wants  invoice split to be happened based on item level PO number. That was done successfully.
    This invoice split logic  was written in the billing routine  RV60C901(Customized).
    But now they came back with a issue that the invoice split  should be done  only if they use the new output  type but not for the old one. That means for the same customer for one output type invoice split should be done based on item level po number and for one output type it should not. How can this be controlled for a particular
    output type?
    This output types will not be used in the billing routine as the split happens at the sales order level. Is there any configuration that allows split for a particular output type.
    Please suggest me how to proceed???

    Hi,
    In the invoice split routine check if it is possible to find the output type making use of field symbols.
    Just check in debug if the variable for output type is available as follows:-
    (Program Name)variable name.
    Regads,
    Ankur Parab

  • Credit limits for the same Customer for different countries.

    Hi SAP Gurus,
    A customer belongs to 2 different countries, the credit limits are maintained  in FD32 for one country.
    But basing on the "country" the credit limits should change for the same customer.
    So how we need to handle FD32 in this scenario. Is there any option to maintain credit limits basing on the "Country"?
    Thanks and Regards
    Sunil
    Edited by: Sunil.kds on May 27, 2011 9:37 AM

    Hi ,
         sales area wise , you can differentiate the credit limit . In this case , you can have one more credit control area and assign it to new sales area. it the same customer comes under diff country , extend the customer  to the new sales area . By doing so, you can have 2 credit limits for the same customer.
    With Regards
    S.Siva

  • Can we create same party site with same customer in different OU

    I am able to create same party sites with same customer in different Operating Unit through front end but I am not able to do so using TCA Api HZ_CUST_ACCOUNT_SITE_V2PUB.create_cust_acct_site .I am getting the below error 'Value for cust_account_id - party_site_id must be unique'.Ineed to migrate customer details from one OU to another OU and the party site number need to be same .Can anyone suggest a way in which I can do the above ?
    Reeja

    We can create multiple customer acct site across different OU pointing to same party_site_id with API's also. I am sure that you have initialise the org context in your code somewhere and thus its giving you this error. Reinitialise the org to target org before calling this API.
    Thanks
    Amit Singh

  • Why Apple do not allow Bluetooth sharing between different devices even when I want to share something between apple devices I have to make sure that we have the same application

    Why Apple do not allow Bluetooth sharing between different devices even when I want to share something between apple devices I have to make sure that we have the same application

    We are users just like you and would not know why Apple makes teh decisions that they do , nor are we allowed to speculate about it here.
    From the terms of use:
    do not add Submissions about nontechnical topics, including:
    Discussions of Apple policies or procedures or speculation on Apple decisions."

  • Different Line item in invoice for same po line item?

    Hi,
    Can I post two  invoice  line item for same po line item?
    What is significance in business point view?
    Thanks and Regards
    Anil Patil

    HI,
    You can post two invoice for one line item in PO,
    Say u  raise a PO for 100 and then do a GR for 50 1st and then 50 2nd then you have two invoice for the same PO with same line item.
    This can also be done with respect to the delivery number also. and then make a invoice with respect to delievry note in MIRO.
    Thanks & regards,
    Kiran

  • Clearing customer open items

    Hello!
    Can anybody help to find a way how to clear customer open items when there is no reference number in use for customer. In electronic bank statemen there is only billing document number in TXT field. How to configure "Make Global Settings for Electronic Bank Statement" and "Define Search String for Electronic Bank Statement" for that purpose.
    With all the best,
    Merlin

    Hello,
    IMG => Financial Accounting => Bank Accounting => Business Transactions => Payment Transactions => Electronic Bank Statement => Make Global Settings for Electronic Bank Statement
    Give your chart of Accounts
    1. Create your account symbols
    Create freely definable account symbols. Make sure that you are able to identify them when you are configuring in future steps.
    2. Assigning Accounts to Account Symbols
    Here you need to assign the account symbols to GL Accounts or you need to use masking logic. You must have designed your accounts in such a way that the end digits will work for posting the entries to FI. Account Modifier you use as + and use your local currency, if you do not have any foreign currency postings.
    3. Create Posting Rules
    Create freely definable posting rules.
    4. Define Posting Rules (This is the most important configuration for your FI Postings / Clearings)
    a) For all the payments you need to create the entries for posting area 1
    b) For all the receipt you need to create the entries for posting area 1 and 2
    c) Use the document type DZ in case if you want to clear the items. Use Posting type 8. If the invoice number is there in the reference field of bank statement, automatically the same will be selected by the system and cleared.
    d) If you want just only entries to be posted use posting type 1.
    e) If you want to clear the check, then use the posting type 4.
    f) Configure according to the entries to be posted.
    g) If you are going for clearing something the offsetting debit / offsetting credit (as the case may be) need not be given.
    5. Create Transaction Type
    Create freely definable Transaction Type
    Select the transaction type and assign the external transactions to your posting rules.
    For outgoing check use 13 as Interpretation Algorithm and 1 as the processing type.
    Remaining all case use 1 (Standard algorithm) and 5 as the processing type.
    Please also go through the below mentioned note in case if you are required to use further available interpretation algorithms or processing types.
    6. Assign Bank Accounts to Transaction Types:
    You need enter the Bank Key / Bank Account / Transaction type here.
    You can get the the bank key and bank account details from table T012K (Go to SE16)
    Further supplementary notes may be useful to you:
    There are different programs to upload electronic bank statement.
    FF.5 or FF_5.
    I think your case Multicash format you are using.
    You need have three files in FF.5 and two files in FF_5
    You can prepare a Z program in order to truncate the electronic bank statement into two or three part files and save them on the application server.
    1. Take all the external codes list from bank.
    2. Take any available documentation from the Bank describing the relevance of the external codes.
    3. Make sure that your Chart of Accounts (Bank Accounts) last digits logic is appropriate to meet the requirements.
    4. Based on this decide the Account Symbols that are required to be created.
    5. Make sure that the masking rules are configured properly.
    6. Decide the posting rules that needs to be created.
    7. Link up your external symbols provided by the bank with Posting rules and give proper algorithms for posting and clearing logic.
    6. Concentrate on the posting areas to be posted while uploading the bank statement.
    Further explanation would help you to understand the functionality when uploaded the electronic bank statement.
    Main purpose of uploading the bank statement into SAP is to make your Bank Main Account and physical bank statement balance in sync.
    You do not have any traditional Bank Reconciliation Statement (BRS) report in SAP.
    SAP is normally you maintain bank main account and bank sub account. Whenever you make a payment through F-53 or F-58 or F110, the entry would be:
    Vendor Account Dr
    To Bank Sub Account
    The ending digits of the sub-account would be important in configuring the masking rule. Based on this masking rule when you upload the bank statement the entry the system would pass is:
    Bank Sub Account Dr
    To Bank Main Account
    It depends on the configuration, either the sub account will be cleared by the system automatically or you need to run F.13 to clear the sub accounts.
    At the time of receipts, you have different accounting entries unlike payments. It needs to post to two posting areas. 1. GL Accounting 2. Sub-Ledger Accounting
    The entries would system itself pass is:
    Bank Main Account Dr
    To Bank Sub Account
    Bank Sub Account Dr
    To Cutomer account.
    Clearing logic mentioned for your posting rules and the alogrithm used for your external bank symbols will also play pivotal role in clearing the accounts.
    Ideally you will use
    FF67 / FF.5 / FF_5 for uploading manual or electronic bank statement
    FEBA / FEBA_BANK_STATEMENT is used for furthe rprocessing.
    GO THROUGH SAP NOTE 48854
    Please go through SAP Note. 48854. You will get an idea regarding the functionality of the algorithms.
    Though this note is in relevant to GB specific, you will find this very useful.
    description follows below regarding the normal procedure for maintaining table T028G. Due to the different bank codes and posting rules, pre-Customizing is not possible at this point.
    The following processing types are available - unless stated otherwise, you should use the interpretation algorithm: '000 - No interpretation' in each case.
    1. '00': There is no processing. The entry line is ignored.
    2. '01': A validation is made whether an entry exists for the transferred check number in the check table (PAYR). The check number and payment document number are transferred for further processing. Interpretation algorithm: outgoing check processing '011'-'013'; the update in the check file is via the interpretation algorithm.
    3. '02': Transfer of the ending balance to the electronic bank statement
    4. '03': Transfer of the opening balance to the electronic bank statement
    5. '04': Clearing via the allocation number which is delivered with the bank statement. No interpretation algorithm.
    6. '05': Clearing of BACS payments or BACS bank collection. The reference text field is first read to ascertain whether it involves payments initiated by users or bank collection via BACS. Providing it does involve a cash transaction initiated by the user, the payment document numbers concerned are determined via the reference number and transferred as a reference to further processing. Interpretation algorithm: '000 - No interpretation' or '019 - Reference number DME'.
    Note
    To differentiate between the two procedures in table T028G, you have to maintain two separate entries.
    Example: the bank uses bank code '62' for cash receipts and for BACS bank collection.
    Ext. Transaction +/- sign Posting rule Int. Algorithm Processing type 62 + GB62 001 5
    62 SAPBACS + GB63 000 5
    7. '06': Bank costs or interest revenues
    Recommended interpretation algorithm: '000 - No interpretation'
    8. '07': Total amount of cash disbursements
    9. '08': Total amount of cash receipts
    10. '09': Items not paid
    Recommended interpretation algorithm: '000 - No interpretation'
    Regards,
    Ravi

  • Customized report for cost centers by different cost centers

    Hi All,
    Customized report for cost centers by different cost centers:
    I need to build a customised report with the following format:
    Cost element columns | Cost center 1 | cost center 2 | cost center 3, etc -> dynamic cost center columns
    CE 1 .............................. amount xxx  |  . amount xxx | ..  amount xxx
    CE 2 .............................. amount xxx  |  . amount xxx | ..  amount xxx
    CE 3 .............................. amount xxx  |  . amount xxx | ..  amount xxx
    CE 3 .............................. amount xxx  |  . amount xxx | ..  amount xxx
    User selection screen:
    Controlling are:
    Fiscal Year:
    From period to period:
    cost center group ... <range of CC group> or
    cost center value ... <range of CC value>
    Questions:
    From the above selection screens, I need to pull out all the data stored in the table: COEP
    But, the problem is that inside this table, there is no cost center or cost center group stored; and therefore the program should be smart enough to pull out all the documents from the table: COEP and then make sure that the document / list of documents that pull out should belongs to the cost center or cost center group, as well as date range.
    KIndly advise how functional description/design should be built in order ABAPer can understand the requirement?
    What should be the tables to refer in order meet the requirement.
    Similar Standard SAP cost center report should be S_ALR_87013611 - Cost Centers: Actual/Plan/Variance, but this report read from many tables.

    Hi,
    Please find the logic below & try it at your system-
    Here cost center group is not possible (also i not checked it so do it on your own simultaneously i am trying the same).
    Use Table BSEG-> in bseg give the cost center-> with the help of cost center find the account number (field HKONT)-> take this GL account number & got to table COEP-> in this give the GL account number at field 'offsetting account' (field GKONT) & you will get the line item.
    Try it & let me know if you have any question.
    Thanks

  • Adding same Free Goods items in the sales order

    Hello experts,
    We are using (exclusive) free goods functionality. In condition records you can specify the free goods that should be added to certain materials when they are ordered by the customer. The problem is this: when different materials should lead to the same free goods item, the system is creating an item line for free goods for every single material for which a free goods condition record is created. The business would like to see that free goods item lines that contain the same free goods material is consolidated into 1 item line. The reason for this is that the external service provider is charging per item line that is dispatched to them. As far as I know standard SAP does not support this functionality. Do any of you have encountered the same problem? I'm very curious if there is any solution for this issue.
    Regards, Charles

    Hi,
    Not sure but still putting my openion,
    Let system determine more FREE items in sales order but when creating order it should consolidate in one single line item with quantity.
    For this write data transfer routine in VOFM
    Write logic if in sales order have more items with same item category say TANN then consolidate it in one single line item with all qty.
    And then assign same routine in copy control order to delivery.
    Kapil

  • Dummy Profit Center -- Customer Line item

    Hello
    I have a scenerrio on dummy profit center
    1. On Augst 2006 -- A customer invoice has been posted using FB70 and some how the customer account  line item when to dummy profit center and other line items were posted to a the correct profit center.
    2. On August 2006 -- Due to this business reversed original customer invoice using FB08 which again has customer account line item when to dummy profit center and other line items were posted to the correct profit center.
    Origianl Invoice: Customer XYZ Ltd - GL 130024 ( Customer Reconciliation Account)--- Dummy profit Center -- Dr. 235,000 USD
    Reversal          : Customer XYZ Ltd - GL 130024 (Customer Reconciliation Account) -- Dummy profit center -- Cr. 235,000 USD
    This is want we want and this is want we see in our FI entries and all are with the same posting dates.
    Now some how when you look at KE5Z (Profit Center line items report) for dummy profit centers even today.
    1. You see the original customer invoice showing dummy profit center  on the customer account  line item as Dr. 235,000 on GL 130024.
    2. You see the reversal customer invoice showing correct profit center on the other line items and you dont see customer account line item that is GL130024 on this document.
    3. Because of which dummy profit center is showing Dr.balance.
    PCA report:
    Origianl Invoice: Customer XYZ Ltd - GL 130024 ( Customer Reconciliation Account)--- Dummy profit Center -- Dr. 235,000 USD
    Reversal          : Customer XYZ Ltd - No entry except the same document number with the other line items.
    Could you please give us the thoughts except the PCA entry only as business dont have to have this entry. Business basically want to know the reason for not showing the customer line item on the reversal document which will knot out the dummy.
    Will assign good points
    Thanks
    Kumar

    Not answered but closing

Maybe you are looking for