Why "send sms" not work in flash lite3 ???

hello
i write this code for send sms in device :
on(release) {
if(_capSMS)
getURL("sms:" add myNumber add "?body=" add myText);
it work fine in flash lite1.1 & 2.x
but not work in flash lite 3 !!!!!
what shall i do ? please help me
can i make the command geturl to work on flashlite 3?
or how can i open an url from flash lite 3?
please help me

Hi,
It appears that the problem is with the security sandbox. To
be able to send an SMS, it looks like you have to publish for Flash
Lite 3, and in the Publish Settings, set 'Local playback security'
to 'Access network only'. I used the following code:
on (release) {
if (System.capabilities.hasSMS) {
getURL("sms:" + myNumber + "?body=" + myText);
And it would only work when the publish settings were set as
above. This was testing on a Nokia E65 with the developer edition
of FL3 installed.
Hope this helps!
Darren

Similar Messages

Why does Adobe sendnow work and the newest and greatest Adobe Send does not work?

Why does Adobe sendnow work and the newest and greatest Adobe Send does not work? I wasted about 8 hours on trying to get Adobe Send to upload 269 files that amounted to 469MB. When it did not work I made a zip file and after a lot of wasted run time that did not work. The first situation gives little indication of when a file is loaded compared to Adobe SendNow. In both cases with Send it failed with a message like only the first 50 can be loaded. When I went and looked none of them had been loaded. With the zip file (I wanted to hide the individual files so they would not be counted) it appeared to work but very slowly and finally said it was done and I went and looked and it had done anything for oever 2 hours except a false "I'm runninng" indication.
Thus, I took a chance with Adobe SendNow and it works great. It never gave me a limit on the amount of files nor on the size of the complete job. It shows me one file at a time when it has finished with the file uploading it. SendNow has never given me any problems.
Why woiuld you want to change the program from SendNow to Send without the newest program being the best, fastest, user friendly program of the two? It just doesn't make sense to me. I suggest that Adobe keep SendNow working until Send is fixed. I would also suggest that SendNow and how it looks be kept, called Send, then modify Send one thing at a time until you get it to the point you need it to be for Acrobat. I have heard nothing good and now I have experienced it that Send is a piece of junk. I wasted most of my work day on giving Adobe the benefit of the doubt to find out I made a very bad decision to trust Adobe to make good decisions on the transfer of a function to another place .... both Adobe's responsibility.without making it painless for your customers that totally rely on you. Don't throw away customer confidence as it is very hard to get it back.

Funny how you answer to "troll". (What's your handle on AT&T forums?)
Yep! Verizon living up to it's contractual obligations by not releasing updates. Caveat emptor!
I think there are some reasonable expectations here to keep customer's happy. When one carrier offers upgrades there is an expectation the same will happen across all the carriers. We have seen that except Big Red.
Verizon could have said the update is in MS court months ago and stilled the voice of the disgruntled, or at least redirected it, but instead chose to be silent. Not for market share but for partial blame I think.
We will have to agree to disagree since you only see Terms & Conditions and I, see customer satisfaction.

NetStream.send not working in Flash Player 11.2 Beta with Cirrus, Please confirm if it is a bug

Title
NetStream.send not working in Flash Player 11.2 Beta with Cirrus, Please confirm if it is a bug or feature
Description
Problem Description:
NetStream.send can not send data to peerstreams when using with cirrus. Conflict with documents.
Sorry for tag the build as 11.0.1.3 while the bug is actually on 11.2 beta since the bug report system didn't have 11.2 beta yet.
If you are not responsible for 11.2 beta bug fix, please help a hand to handle this bug to 11.2 team.
This bug is "killing" to your application, so we really appreciate your help. Thanks.
==Publisher==
nc.connect("rtmfp://");
var ns:NetStream = new NetStream(nc, NetStream.DIRECT_CONNECTIONS);
ns.publish("sendtest");
...//after connection success.
ns.send("clientfunction", "ok"); // this line cannot reach subscribers. even if subscribers have client object correctly.
==Subscriber==
nc.connect("rtmfp://");
var ns:NetStream = new NetStream(nc, cirrusid);
var client:Object = new Object();
client.clientfunction = clientfunction; // target function
ns.client = client;
ns.play("sendtest");
Steps to Reproduce:
1. compile the code in the attachment to SendTestExample.swf (not be able to paste it here)
2. run it under flash player 11.2.202.19 beta
3. run it under flash player 11
Actual Result:
HeartBeat is:
Start HeartBeat:
send hello
send hello
send hello
which means NetStream.send was not able to call "clientfunction" as expected.
Expected Result:
Start HeartBeat:
send hello
in client function: hello
send hello
in client function: hello
send hello
in client function: hello
which can call into the clientfunction as flash player 11 did.
Any Workarounds:
I can not find it out since it's an api level bug. But this can be very important for lots of applications which rely on send to do rpc.
Test Configuration
IE8, Firefox under Windows 7
Also have problem under Windows XP (but not well tested on this platform)
App Language(s)
ALL
OS Language(s)
ALL
Platform(s)
Windows 7
Browser(s)
Internet Explorer 8.0
==Attachment==
package {
    import flash.display.Sprite;
    import flash.events.Event;
    import flash.events.NetStatusEvent;
    import flash.events.TimerEvent;
    import flash.media.Video;
    import flash.net.NetConnection;
    import flash.net.NetStream;
    import flash.text.TextField;
    import flash.utils.Timer;
    import flash.utils.setTimeout;
    public class SendTestExample extends Sprite
        public static var statusArea:TextField;
        var ncServer:NetConnection = new NetConnection();
        var nsServer:NetStream;
        var ncClient:NetConnection = new NetConnection();
        var nsClient:NetStream;
        var timer:Timer = new Timer(1000);
        public function SendTestExample() {
            ncServer.addEventListener("netStatus", onNCStatusServer);
            ncServer.connect("rtmfp://p2p.rtmfp.net","99f72ccbed0948d7589dc38a-3ce1b2616680");
            statusArea = new TextField();
            status("status");
            statusArea.x = 0;
            statusArea.y = 0;
            statusArea.border = true;
            statusArea.width = 200;
            statusArea.height = 350;
            addChild(statusArea);
        function onNCStatusServer(event:NetStatusEvent):void {
            status("Step 1:");
            status("server: " + event.info.code);
            status("id: " + ncServer.nearID);
            switch (event.info.code) {
                case "NetConnection.Connect.Success":
                    nsServer = new NetStream(ncServer, NetStream.DIRECT_CONNECTIONS);
                    nsServer.addEventListener(NetStatusEvent.NET_STATUS, onNSStatusServer);
                    nsServer.publish("sendtest");
                    ncServer.removeEventListener(NetStatusEvent.NET_STATUS, onNCStatusServer);
                    ncClient.connect("rtmfp://p2p.rtmfp.net","99f72ccbed0948d7589dc38a-3ce1b2616680");
                    ncClient.addEventListener("netStatus", onNCStatusClient);
                case "NetStream.Publish.BadName":
                    //status("Please check the name of the publishing stream" );
                    break;
        function onNCStatusClient(event:NetStatusEvent):void {
            status("Step 2:");
            status("client: " + event.info.code);
            status("id: " + ncClient.nearID);
            switch (event.info.code) {
                case "NetConnection.Connect.Success":
                    nsClient = new NetStream(ncClient, ncServer.nearID);
                    var c:Object = new Object();
                    c["clientfunction"] = clientfunction;
                    nsClient.client = c;
                    nsClient.play("sendtest");
                    ncClient.removeEventListener(NetStatusEvent.NET_STATUS, onNCStatusClient);
                    //setTimeout(sendHello, 5000);
                case "NetStream.Publish.BadName":
                    //status("Please check the name of the publishing stream" );
                    break;
        protected function onNSStatusServer(event:NetStatusEvent):void {
            status("nsserver: " + event.info.code);
            if (event.info.code == "NetStream.Play.Start") {
                status("Start HeartBeat:");
                this.timer.addEventListener(TimerEvent.TIMER, function (e:Event):void {
                    sendHello();
                this.timer.start();
        protected function sendHello():void {
            status("send hello");
            nsServer.send("clientfunction", "hello");
        protected function status(msg:String):void
            statusArea.appendText(msg + "\n");
            trace("ScriptDebug: " + msg);
        protected function clientfunction(event:Object):void {
            status("in client function: " + event);

Thanks for reporting. I can reproduce the bug in house. We will investigate.
Calise

Why youtube dose not work on my macbook pro 10.6.6?

why youtube dose not work on my macbook pro 10.6.6 ?

Double check you have the latest version of Adobe Flash.

Why iMessage is not working properly anymore since i've uploaded the new iOS 6 ??

Why iMessage is not working properly anymore since i've uploaded the new iOS 6 ??

I'm having the same problem. I have a 4th gen 32GB iPod Touch, and since upgrading to iOS6, iMessage has been nothing but buggy. It will work for an hour or so, and then randomly stop working as it won't send or receive messages. There's nothing wrong with my wifi, because that's the same as it was before. I really hope someone knows something to fox this problem. Some people use iMessage for good reasons - it needs to be a reliable messaging service like it was in iOS5.

Why does abode not work on my galaxy tab2

Why does abode not work on my galaxy tab 2?

The games dont load they just say I need to update to the latest version or say that it is not compaterble with it.

Why does sound not work on my Mac Air?

Why does sound not work on my Mac Air --all setting seem okay. OSX 10.9.2 operating systyem.

Open System Preferences > Sound > Output
Make sure the coorect output devices is selected and the Mute button is not checked.

Captivate 4 AS2 Text Entry Box not working with Flash Player 11

I am having issues with text entry boxes not working at all in flash 11. I am using Captivate 4 and exporting an AS2 swf. When you get to the slide you can type but you cannot see anything nor does the button or keystroke to move on. Also there is no cursor. Any ideas?

You said it is not working with Flash 11, so does that mean you tested with previous version and that worked?
While publishing choose Flash player as 9 and publish that, verify if that plays in a compatible web browser.
AS 2 is a legacy scripting, it has been said not too be supported with even Flash Player 10 --
http://help.adobe.com/en_US/AS2LCR/Flash_10.0/help.html?content=Part2_AS2_LangRef_1.html
I believe if you switch back to version 9 while publish your project, it should work.
Thanks,
Anjaneai

Not sure why Message is not working on my ipad.

Not sure why message is not work on my iPad. It works find on my iPhone.

http://support.apple.com/kb/TS2755

Office 2010 MUI in Finnish and Save and Send function not working after upgrading to Lync 2013 MUI

Problem is as follows. Used to have Office 2010, Outlook 2010 and Lync 2010, everything was working. People used it in Finnish and seemly quite a many of them used the Talleta ja lähetä (Save and Send in Finnish) in Office products.
After upgrading Lync to 2013 version, with Finnish language pack installed with it, the Save and send does not work in Office 2010 if it is used with Finnish as display language. When you try to use it you get a Mapi error and reason is undefined or something,
hard to say what it is exactly in english as the error message is in finnish. On those machines if the display language is changed back to english the Save and send works as it should.
Any ideas?

The problem was caused by the Language Packs for Lync 2013 or Office 2013. Without them all works.
And if you want to just unisntall the 2013 lang packs, then you also need to repair install the office 2010 ones to make it work again.

I have an older iMac 5,1 and the disc drive no longer works. I was hoping that I could the Apple USB super drive as a replacement, but the info on the super drive page says compatible with iMac 2012 or later. Does anyone know why it would not work for me?

I have an older iMac 5,1 and the disc drive no longer works. I was hoping that I could the Apple USB super drive as a replacement, but the info on the super drive page says compatible with iMac 2012 or later. Does anyone know why it would not work for me?

A reply to similar question (Q & As , in product page Apple Store) says:
"...dissable the internal reader hardware from devices setup. Then plug the external usb superdrive and that's it." Answered by Enrique T from Lima Oct 25 2013.
If you can locate an external Apple USB 'Air" superdrive for earlier model MacBook Air, that should work. The newer one for the Air is the same as for iMac, now.
You may be able to use other brands of external USB optical drive with your older intel-based iMac, as some of them function capably. A few should also be able to see system discs or other bootable utilities on DVD.
Hopefully this helps.
Good luck & happy computing!

GETURL is not working in flash player 9.0.124.0.

Dear Friends,
My swf and my html are in different domain so i got a issue
in GETURL function , It is not working in flash player 9.0.124.0.
in IE browser so that i add one parameter like allowScriptAccess
=always then its working fine.but my question is what will happed
if they will introduce any new flash version in future please tell
me what is the permanent solution for this issue.
Thanks

There is no way to know what will change in the future. This
is the solution that works now. It will probably remain in place
for the reasonable future.

Why it is not working?

hai all,
i am new to jsp. please help me with the necessary corrections of the code given below.
<%@ page import="java.io.*, java.sql.*" %>
<%
     ResultSet rs;
     Class.forName("oracle.jdbc.driver.OracleDriver()");
     Connection Con=DriverManager.getConnection("jdbc:oracle:thin:@192.168.x.xx:1521:new","old","new");
     Statement st=Con.createStatement();
%>
why it is not working
Thanks in advance.
by
ramki.

I think you have to put the variables definition (rs, st, con...) in a specific place like this, i mark with (*) what i changed:
<%! (*)
ResultSet rs; (*)
Connection Con; (*)
Statement st; (*)
%> (*)
<% (*)
Class.forName("oracle.jdbc.driver.OracleDriver()");
Con=DriverManager.getConnection ("jdbc:oracle:thin:@192.168.x.xx:1521:new","old","new");
st=Con.createStatement();
%>
good luck,
javi

Why facetime does not working with any carrier in u.s expect att although the iphone is factory unlocked

why facetime does not working with any carrier in u.s expect att although the iphone is factory unlocked

Facetime only works via WiFi. Are you trying to set up Facetime with a T-Mobile account?

Why ps3 is not working well with airport

why ps3 does not work well wth the airport?

If you are referring to online gaming, then PS3 like all non-apple devices uses upnp to open ports.
Apple uses NAT-PMP to open ports.. East and West.. never the twain shall meet.
If it is internal wireless issues.. that is different.. airport should be just like any other wireless router.
If you tell us the issue we have more hope to help.

Why "send sms" not work in flash lite3 ???

Similar Messages

Maybe you are looking for