Office 2010 MUI in Finnish and Save and Send function not working after upgrading to Lync 2013 MUI

Problem is as follows. Used to have Office 2010, Outlook 2010 and Lync 2010, everything was working. People used it in Finnish and seemly quite a many of them used the Talleta ja lähetä (Save and Send in Finnish) in Office products.
After upgrading Lync to 2013 version, with Finnish language pack installed with it, the Save and send does not work in Office 2010 if it is used with Finnish as display language. When you try to use it you get a Mapi error and reason is undefined or something,
hard to say what it is exactly in english as the error message is in finnish. On those machines if the display language is changed back to english the Save and send works as it should.
Any ideas?

The problem was caused by the Language Packs for Lync 2013 or Office 2013. Without them all works.
And if you want to just unisntall the 2013 lang packs, then you also need to repair install the office 2010 ones to make it work again.

Similar Messages

TS1702 My app store, Apple ID, safari, and most other apps do not work after upgrading to iSO 6, How do i solve this problem?

My app store, Apple ID, safari, and most other apps do not work after upgrading to iSO 6, How do i solve this problem? Can somebody help me please?

The App store is a problem for many and I have not seen a solution.
What is "wrong" with your Apple ID?
Try the following:
- A reset. Nothing is lost
Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Restore from backup
- Restore to factory settings/new iPod.

Pinch open and close function not working after upgrade

I'm having trouble with the pinch open and close function on my trackpad. It was working fine until I installed the new Google upgrade and now it doesn't seem to be working. Any suggestions. The other functions are working fine.

Click on the Apple icon at the top left of the screen. Select "System Preferences", then "Trackpad".
Be sure to select:
"Pinch Open and Close" in the "Two Finger" Menu...
Sly

My e-mail is not loading and some plug-in are not working after upgrade.

My e-mail does not load, but I can load it in Internet explorer
my wed site does not show my talking characters after the firefox up-grade

you should visit apple genius at apple sotre .

Since I refreshed Firefox 36.0.4, "Save page as" and "save image as" are not working (even in Safe mode)

I refreshed FF 36.0.4 on invite. Since then "save page as " and "save image as" are not working -- no response when clicked.
In Safe Mode, same problem.
I serached past forum discussions and found several occurrences, but no convincing response.

''afew2 [[#question-1054433|said]]''
<blockquote>
I refreshed FF 36.0.4 on invite. Since then "save page as " and "save image as" are not working -- no response when clicked.
In Safe Mode, same problem.
I serached past forum discussions and found several occurrences, but no convincing response.
</blockquote>
I tried troubleshooting plugins, none appeared to be causing the problem.
I installed 36.0.1, but no difference. Went back to 36.0.4, still no change.
I ran a malware check with Malwarebytes, no change.
A past thread here suggested deleting localstore.rdf, which I tried, no result.
People have had this problem in the past. No one has any idea of how to fix it?

Why does Adobe sendnow work and the newest and greatest Adobe Send does not work?

Why does Adobe sendnow work and the newest and greatest Adobe Send does not work? I wasted about 8 hours on trying to get Adobe Send to upload 269 files that amounted to 469MB. When it did not work I made a zip file and after a lot of wasted run time that did not work. The first situation gives little indication of when a file is loaded compared to Adobe SendNow. In both cases with Send it failed with a message like only the first 50 can be loaded. When I went and looked none of them had been loaded. With the zip file (I wanted to hide the individual files so they would not be counted) it appeared to work but very slowly and finally said it was done and I went and looked and it had done anything for oever 2 hours except a false "I'm runninng" indication.
Thus, I took a chance with Adobe SendNow and it works great. It never gave me a limit on the amount of files nor on the size of the complete job. It shows me one file at a time when it has finished with the file uploading it. SendNow has never given me any problems.
Why woiuld you want to change the program from SendNow to Send without the newest program being the best, fastest, user friendly program of the two? It just doesn't make sense to me. I suggest that Adobe keep SendNow working until Send is fixed. I would also suggest that SendNow and how it looks be kept, called Send, then modify Send one thing at a time until you get it to the point you need it to be for Acrobat. I have heard nothing good and now I have experienced it that Send is a piece of junk. I wasted most of my work day on giving Adobe the benefit of the doubt to find out I made a very bad decision to trust Adobe to make good decisions on the transfer of a function to another place .... both Adobe's responsibility.without making it painless for your customers that totally rely on you. Don't throw away customer confidence as it is very hard to get it back.

Funny how you answer to "troll". (What's your handle on AT&T forums?)
Yep! Verizon living up to it's contractual obligations by not releasing updates. Caveat emptor!
I think there are some reasonable expectations here to keep customer's happy. When one carrier offers upgrades there is an expectation the same will happen across all the carriers. We have seen that except Big Red.
Verizon could have said the update is in MS court months ago and stilled the voice of the disgruntled, or at least redirected it, but instead chose to be silent. Not for market share but for partial blame I think.
We will have to agree to disagree since you only see Terms & Conditions and I, see customer satisfaction.

Earbuds with Mic and Skip Functions not working after IOS 6.0.1 update?

I have earbuds with a mic and skip buttons functions and noticed that mic and the skip music functions stop working after updating to IOS 6.0.1. Now when I talk on the phone the mic on iPhone itself is working and not the mic on my earbuds. Also when playing music he skip functions has stop working. Has anyone noticed these problems?

Phone restart > if that doesn't work then do a reset of the settings. Full restore would be the last option.

11.1.1.6.4 Repository variables for DSN and USER do not work after upgrade

Hi,
The Repository Variables OLAP_DSN and OLAP_USER no longer work after upgrading to 11.1.1.6.4 i.e they return a connection error when trying to import metadata but the connection is correct if explicitly set without the variable used.
I have tried the following resolution:
- From command line execute commands to set variable properties via admintool.exe /command vartext.txt
Open rpdname user password
SetProperty "Variable" "OLAP_DSN" Initializer "'ORCL.GLOBAL'"
Save
Close
Exit
This script works fine as demonstrated by commenting out Save, Close, Exit and running. But it does not resolve the problem.
The issue is consistent as in the OLAP_USER variable does not work if DNS for connection pool set to ORCL.GLOBAL.
Is this a bug?
Thanks in advance
Edited by: 983325 on 26-Feb-2013 02:35

There is a 3.1.0.5 client. First thing I would try is the newest client.
Sent from Cisco Technical Support iPad App

Preview and Mac Mail not working after upgraded to 10.4.11

Hello,
I just upgraded to 10.4 everything works fine, after I upgraded to 10.4.11, I find funny noice on my hard drive and preview, mac mail is not working. Trashing the preference is not working.
Urgent help please.
Thank you
Benny

There are no guarantees, but following this procedure when installing updates and upgrades on your Mac, or even re-installing them, will go a long way towards avoiding unpleasant after effects and ‘post-update stress disorder’.
It is also worth noting that it is an extreme rarity for updates to cause upsets to your system, as they have all been extensively beta-tested, but they may well reveal pre-existing ones, particularly those of which you may have been unaware. If you are actually aware of any glitches, make sure they are fixed before proceeding further.
So before you do anything else:
If you can, make a full backup first.
Turn off sleep mode for both screen and hard disk.
Disconnect all peripherals except your keyboard and mouse.
1. Repair Permissions (in Disk Utility)
2. Verify the state of your hard disk using Disk Utility. If any faults are reported, restart from your install disk (holding down the C key), go to Disk Utility, and repair your startup disk. Restart again to get back to your startup disk.
At least you can now be reasonably certain that your system does not contain any obvious faults that might cause an update/upgrade to fail.
3. Download the correct version of the COMBO update from the Apple download site. If your car runs on gasoline you would not want to fill the tank with diesel, so don’t try to install the PPC updater on an Intel Mac!
The 10.4.11 Combo Updater for PPC Macs is here: http://support.apple.com/downloads/MacOS_X_10_4_11_Combo_Update__PPC
And for Intel Macs: http://www.apple.com/downloads/macosx/apple/macosx_updates/macosx10411comboupdat eintel.html
If you prefer to download updates via Software Update in the Apple menu (which would ensure that the correct version for your Mac was being downloaded), it is not recommended to allow SU to install major (or even minor) updates automatically. Set Software Update to just download the updater without immediately installing it. There is always the possibility that the combined download and install (which can be a lengthy process) might be interrupted by a power outage or your cat walking across the keyboard, and an interrupted install will almost certainly cause havoc. Once it is downloaded, you can install at a time that suits you. You should make a backup copy of the updater on a CD in case you ever need a reinstall.
Full details about the 10.4.11 update here: http://support.apple.com/kb/TA24901?viewlocale=en_US
More information on using Software Updater here:
http://support.apple.com/kb/TA24901?viewlocale=en_US
Using the Combo updater ensures that all system files changed since the original 10.4.0 are included, and any that may have been missed out or subsequently damaged will be repaired. The Delta updater, although a temptingly smaller download, only takes you from the previous version to the new one, i.e. for example from 10.4.10 to 10.4.11. Software Update will generally download the Delta updater only. The preferable Combo updater needs to be downloaded from Apple's download site.
Now proceed as follows:
4. Close all applications.
5. Unplug all peripherals except your keyboard and mouse.
6. Install the update/upgrade. Do not under any circumstances interrupt this procedure. Do not do anything else on your computer while it is installing. Be patient.
7. When it ask for a restart to complete the installation, click restart. This can take longer than normal, there are probably thousands of files to overwrite and place in the correct location. Do nothing while this is going on.
8. Once your Mac is awake, repair permissions again, and you should be good to go!
If your Mac seems slightly sluggish or ‘different’, perform a second restart. It can’t hurt and is sometimes efficacious!
9. Open a few of your most used applications and check that all is OK. In this connection please remember that not all manufacturers of third party applications and plug-ins, add-ons, haxies etc, will have had time to do any necessary rewrites to their software to make them compliant with the latest version of your operating system. Give them a weeks or two while you regularly check their websites for updates. This applies particularly to plug-ins for Safari 3.
N.B. Do not attempt to install two different updates at the same time as each may have different routines and requirements. Follow the above recommendations for each update in turn.
Lastly, Apple's own article on the subject of Software Update may also be useful reading:
http://docs.info.apple.com/article.html?artnum=106695
If you are updating Safari (or just have):
Input Managers from third parties can do as much harm as good. They use a security loophole to reach right into your applications' code and change that code as the application starts up. If you have installed an OS update and Safari is crashing, the very first thing to do is clear out your InputManagers folders (both in your own Library and in the top-level /Library), log out and log back in, and try again.
So, disable all third party add-ons before updating Safari, as they may not have been updated yet for the new version. Add them back one by one. If something goes awry, remove it again and check on the software manufacturer's website for news of an update to match your version of Safari. Remember: Tiger up to 10.4.10 used Safari 2.0.4 or, if you downloaded it, Safari 3.0.3 beta. Safari 10.4.11 used Safari 3.0.4 which was not a beta. If Safari 3.1.2 on 10.4.11 is not the fastest browser you have ever used, then something is wrong!
Moreover, trying to revert to Safari 3.0.4 (or worse still, version 2) when running 10.4.11 or 10.5 can have repercussions, as Safari 3.1.1 uses a completely different webkit on which other applications like iChat, Mail and Dashboard Widgets etc also rely, and may entail you having to reinstall an earlier operating system.
Most errors reported here after an update are due to an unrepaired or undetected inherent fault in the system, and/or a third party ad-on. Two such add-on that have been frequently mentioned here for causing such problems are Piclens and Pithhelmet. If you have them, trash them.
Additional tips on software installation here:
http://docs.info.apple.com/article.html?artnum=106692
To reiterate, Input Managers reach right into an application and alter its code. This puts the behavior of the affected application outside the control and responsibility of its developers: a recipe for problems. That's not to say that issues absolutely will ensue as a result of Input Managers, but you, as a user, must decide. If the functionality of a specific Input Manager or set thereof is really important to you, you may well choose to assume the associated risk.
Again, the advice is to remove all Input Managers from the following directories:
• /Library/InputManagers
• ~/Library/InputManagers
especially prior to system updates (they can always be added back one-by-one later).

Windows 10 - No sound and mediaplayer does not work after upgrade

Hi !I can't get the sound to work after upgrade to win 10, - and windows mediaplayer will not openmp3's -- I get video on the VLC - but no sound... If anybody can help me, - please post a direct link to the driver I have toreinstall.. Thanks CarstenNorway

Thanks for the answer- but I mangage to solve the problem my self this time... I just did go to controlpanel - and clicked right button on the mouse - and updated both sound drivers thatI did find in there. After restart of the lap - everything worked ut well.. I am supprized !! Carsten

Ever since I downloaded Acrobat Pro 11.0.09, the PDF Maker and Save As PDF have not worked, but instead cause MS Word 2013 to crash.

Ever since I downloaded the Acrobat Pro 11.0.09, the PDF Maker has not worked, but instead causes MS Word 2013 to crash. I cannot find the cause or the solution.
forumnotifier

OK I will try to elaborate this time with pictures so it is clear what I am asking and what the issue I am facing is.
The specific option I want to be able to use from within the Adobe Acrobat Pro user interface is
File\Create\Batch Create Multiple Files
When I select that menu item a floating tool bar thing pops up that I can drag and drop files onto.
If I drag excel or powerpoint documents onto it and press OK it converts them fine. If I drag MS word documents into it the documents appear in the list but when I click OK it says no files processed.
In the process of troubleshooting I also tried using the Add Files button. That is when I discovered that MS word documents (*.doc, *.docx) are not showing up in the list of supported file types.
The same thing happens when I try converting a single file using the File\Create\Create PDF From File menu item. Just like above the MS word documents do not show up in the list of supported file types.
Looking in my registry entries as suggested by the article linked to by one of the posters above I can see both *.doc and *.docx types registered in the correct place.
Unless I can use the batch convert command as intended by the time my trial period runs out in 13 days I cannot justify buying this software. If converting the documents one at a time was acceptable I would just use Save As PDF from within MS Word which works just fine. I need the batch convert function so I can convert my whole library of word documents to PDF at once.
Any further assistance greatly appreciated!
Regards,
Gray

Nvidia is not working after upgrading nvidia driver and kernel

I upgraded nvidia driver and kernel. After rebooting graphic mode is not working. Here xorg.o.log
[ 281.180]
This is a pre-release version of the X server from The X.Org Foundation.
It is not supported in any way.
Bugs may be filed in the bugzilla at http://bugs.freedesktop.org/.
Select the "xorg" product for bugs you find in this release.
Before reporting bugs in pre-release versions please check the
latest version in the X.Org Foundation git repository.
See http://wiki.x.org/wiki/GitPage for git access instructions.
[ 281.181]
X.Org X Server 1.10.0.902 (1.10.1 RC 2)
Release Date: 2011-04-08
[ 281.181] X Protocol Version 11, Revision 0
[ 281.181] Build Operating System: Linux 2.6.38-ARCH i686
[ 281.181] Current Operating System: Linux localhost 2.6.38-ARCH #1 SMP PREEMPT Wed Mar 30 07:14:27 UTC 2011 i686
[ 281.181] Kernel command line: BOOT_IMAGE=/boot/vmlinuz26 root=/dev/disk/by-uuid/b766e332-2aad-4047-8562-567180150189 ro quiet
[ 281.182] Build Date: 11 April 2011 10:49:12AM
[ 281.182]
[ 281.182] Current version of pixman: 0.20.2
[ 281.182] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 281.182] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 281.183] (==) Log file: "/var/log/Xorg.0.log", Time: Thu Apr 14 17:11:37 2011
[ 281.183] (==) Using config file: "/etc/X11/xorg.conf"
[ 281.183] (==) Using config directory: "/etc/X11/xorg.conf.d"
[ 281.183] (==) ServerLayout "Layout0"
[ 281.183] (**) |-->Screen "Screen0" (0)
[ 281.183] (**) | |-->Monitor "Monitor0"
[ 281.184] (**) | |-->Device "Videocard0"
[ 281.184] (**) |-->Input Device "Keyboard0"
[ 281.184] (**) |-->Input Device "Mouse0"
[ 281.184] (**) Option "Xinerama" "0"
[ 281.184] (==) Automatically adding devices
[ 281.184] (==) Automatically enabling devices
[ 281.184] (WW) The directory "/usr/share/fonts/OTF/" does not exist.
[ 281.184] Entry deleted from font path.
[ 281.184] (==) FontPath set to:
/usr/share/fonts/misc/,
/usr/share/fonts/TTF/,
/usr/share/fonts/Type1/,
/usr/share/fonts/100dpi/,
/usr/share/fonts/75dpi/
[ 281.184] (==) ModulePath set to "/usr/lib/xorg/modules"
[ 281.184] (WW) Hotplugging is on, devices using drivers 'kbd', 'mouse' or 'vmmouse' will be disabled.
[ 281.184] (WW) Disabling Keyboard0
[ 281.184] (WW) Disabling Mouse0
[ 281.184] (II) Loader magic: 0x822e120
[ 281.184] (II) Module ABI versions:
[ 281.184] X.Org ANSI C Emulation: 0.4
[ 281.184] X.Org Video Driver: 10.0
[ 281.184] X.Org XInput driver : 12.2
[ 281.184] X.Org Server Extension : 5.0
[ 281.185] (--) PCI:*(0:1:0:0) 10de:0322:0000:0000 rev 161, Mem @ 0xfd000000/16777216, 0xe8000000/134217728, BIOS @ 0x????????/131072
[ 281.185] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
[ 281.185] (II) LoadModule: "extmod"
[ 281.185] (II) Loading /usr/lib/xorg/modules/extensions/libextmod.so
[ 281.185] (II) Module extmod: vendor="X.Org Foundation"
[ 281.185] compiled for 1.10.0.902, module version = 1.0.0
[ 281.185] Module class: X.Org Server Extension
[ 281.185] ABI class: X.Org Server Extension, version 5.0
[ 281.185] (II) Loading extension MIT-SCREEN-SAVER
[ 281.185] (II) Loading extension XFree86-VidModeExtension
[ 281.185] (II) Loading extension XFree86-DGA
[ 281.185] (II) Loading extension DPMS
[ 281.185] (II) Loading extension XVideo
[ 281.185] (II) Loading extension XVideo-MotionCompensation
[ 281.185] (II) Loading extension X-Resource
[ 281.185] (II) LoadModule: "dbe"
[ 281.185] (II) Loading /usr/lib/xorg/modules/extensions/libdbe.so
[ 281.185] (II) Module dbe: vendor="X.Org Foundation"
[ 281.185] compiled for 1.10.0.902, module version = 1.0.0
[ 281.185] Module class: X.Org Server Extension
[ 281.185] ABI class: X.Org Server Extension, version 5.0
[ 281.185] (II) Loading extension DOUBLE-BUFFER
[ 281.185] (II) LoadModule: "glx"
[ 281.186] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 281.216] (II) Module glx: vendor="NVIDIA Corporation"
[ 281.217] compiled for 4.0.2, module version = 1.0.0
[ 281.217] Module class: X.Org Server Extension
[ 281.217] (II) NVIDIA GLX Module 173.14.28 Wed Sep 29 10:17:05 PDT 2010
[ 281.217] (II) Loading extension GLX
[ 281.217] (II) LoadModule: "record"
[ 281.217] (II) Loading /usr/lib/xorg/modules/extensions/librecord.so
[ 281.217] (II) Module record: vendor="X.Org Foundation"
[ 281.217] compiled for 1.10.0.902, module version = 1.13.0
[ 281.217] Module class: X.Org Server Extension
[ 281.217] ABI class: X.Org Server Extension, version 5.0
[ 281.217] (II) Loading extension RECORD
[ 281.217] (II) LoadModule: "dri"
[ 281.217] (II) Loading /usr/lib/xorg/modules/extensions/libdri.so
[ 281.217] (II) Module dri: vendor="X.Org Foundation"
[ 281.217] compiled for 1.10.0.902, module version = 1.0.0
[ 281.217] ABI class: X.Org Server Extension, version 5.0
[ 281.217] (II) Loading extension XFree86-DRI
[ 281.217] (II) LoadModule: "dri2"
[ 281.217] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
[ 281.218] (II) Module dri2: vendor="X.Org Foundation"
[ 281.218] compiled for 1.10.0.902, module version = 1.2.0
[ 281.218] ABI class: X.Org Server Extension, version 5.0
[ 281.218] (II) Loading extension DRI2
[ 281.218] (II) LoadModule: "nvidia"
[ 281.218] (II) Loading /usr/lib/xorg/modules/drivers/nvidia_drv.so
[ 281.218] (II) Module nvidia: vendor="NVIDIA Corporation"
[ 281.218] compiled for 4.0.2, module version = 1.0.0
[ 281.218] Module class: X.Org Video Driver
[ 281.218] ================ WARNING WARNING WARNING WARNING ================
[ 281.219] This server has a video driver ABI version of 10.0 that is not
supported by this NVIDIA driver. Please check
http://www.nvidia.com/ for driver updates or downgrade to an X
server with a supported driver ABI.
[ 281.219] =================================================================
[ 281.219] (II) NVIDIA dlloader X Driver 173.14.28 Wed Sep 29 09:55:18 PDT 2010
[ 281.219] (II) NVIDIA Unified Driver for all Supported NVIDIA GPUs
[ 281.219] (--) using VT number 7
[ 281.222] (II) Loading sub module "fb"
[ 281.222] (II) LoadModule: "fb"
[ 281.222] (II) Loading /usr/lib/xorg/modules/libfb.so
[ 281.222] (II) Module fb: vendor="X.Org Foundation"
[ 281.222] compiled for 1.10.0.902, module version = 1.0.0
[ 281.222] ABI class: X.Org ANSI C Emulation, version 0.4
[ 281.222] (II) Loading sub module "wfb"
[ 281.222] (II) LoadModule: "wfb"
[ 281.222] (II) Loading /usr/lib/xorg/modules/libwfb.so
[ 281.223] (II) Module wfb: vendor="X.Org Foundation"
[ 281.223] compiled for 1.10.0.902, module version = 1.0.0
[ 281.223] ABI class: X.Org ANSI C Emulation, version 0.4
[ 281.223] (II) Loading sub module "ramdac"
[ 281.223] (II) LoadModule: "ramdac"
[ 281.223] (II) Module "ramdac" already built-in
[ 281.223] (II) Loading /usr/lib/xorg/modules/drivers/nvidia_drv.so
[ 281.226] (II) Loading /usr/lib/xorg/modules/libwfb.so
[ 281.226] (II) Loading /usr/lib/xorg/modules/libfb.so
[ 281.226] (II) UnloadModule: "nvidia"
[ 281.226] (II) Unloading nvidia
[ 281.226] (II) UnloadModule: "wfb"
[ 281.226] (II) Unloading wfb
[ 281.226] (II) UnloadModule: "fb"
[ 281.226] (II) Unloading fb
[ 281.226] (EE) Screen(s) found, but none have a usable configuration.
[ 281.226]
Fatal server error:
[ 281.226] no screens found
[ 281.226]
Please consult the The X.Org Foundation support
at http://wiki.x.org
for help.
[ 281.226] Please also check the log file at "/var/log/Xorg.0.log" for additional information.
[ 281.226]

bilgee0629 wrote:
Arjann wrote:
I think the new xorg-server is the problem as it isn't supported by this nvidia driver yet.
You could try to install the nouveau driver until nvidia comes with a new version of the 173 branch that supports xorg-server 1.10, see: https://wiki.archlinux.org/index.php/Nouveau for information. As lower-grade options, you might also consider xf86-video-nv and xf86-video-vesa.
Should i uninstall nvidia driver, then install it?
I think thats the easy way yes, else you have to blacklist the nvidia kernel module.. check the wiki link of nouveau for details.

U310 Touch pad functions not working after opening Office 2010

Hey, I've been having problems with loosing my touchpad capabilties after opening office. It doesn't come back until I restart the laptop. I've read many threads and updated my touchpad driver to the latest one I could find for my latop. Any other solutions? Thanks
-Ash

Touchpad was working fine until I install office 2010. A week later, the touchpad is working real funny and not responding at times. I tried restoring a couple of time and problem is still there, Uninstall Office 2010 and problem is solved.

"show my windows and tabs from last time" does not work after upgrade to 8.01

After I upgraded to the latest v8.01 I have lost all my tabbed sites and even when trying to add them and save them with the Tools>Options>General>Start up>when Firefox starts selected feature "show my windows and tabs from last time" it does not hold the saved sites and when browser is restarted it always loses all the tabs and only shows one tab with Firefox home webpage. I need to have several sites open to work and the only way to do that now is to make sure I click the "Use current pages" under General Option in Tools. It is getting very annoying because I keep changing my tabs to different websites during a session and I am used to just closing the browser, relying on having them all back in when restarting Firefox.

Make sure that you do not use Clear Recent History to clear the <i>Browsing History</i> when you close Firefox.
*https://support.mozilla.com/kb/Clear+Recent+History
*https://support.mozilla.com/kb/Firefox+does+not+ask+to+save+tabs+and+windows+on+exit
It is possible that there is a problem with the files sessionstore.js and sessionstore.bak in the Firefox Profile Folder.
Delete the sessionstore.js [2] file and possible sessionstore-##.js [3] files with a number and sessionstore.bak in the Firefox Profile Folder.
* Help > Troubleshooting Information > Profile Directory: Open Containing Folder
* http://kb.mozillazine.org/Profile_folder_-_Firefox
Deleting sessionstore.js will cause App Tabs and Tab Groups and open and closed (undo) tabs to get lost, so you will have to create them again (make a note or bookmark them).
See also:
* [1] http://kb.mozillazine.org/Session_Restore
* [2] http://kb.mozillazine.org/sessionstore.js
* [3] http://kb.mozillazine.org/Multiple_profile_files_created

TS1702 My cars 2 app mate app is not working after upgrading from ipad to ipad 2...... synced.... uninstalled and re installed several times as well as wiped ne ipad out and re did the whole proccess several times. how can I get this app working?

I have installed the cars 2 app mate on a ipad 2 from an ipad 1 synced with itunes account.. all is working except this app. After many times of un installing and re installing aswell as talking to apple tech suport this app is still not working.... its there it just has no function...... how can i get this installed and working, my grandson is autistic and uses this app many hours a day........ it is important for me to get this up and running again for him.......

(1) So, I found a youtube video showing how to open up my iMac and replace a Disk drive. I opened it. I removed the disk drive. I opened the metal cover of the lid of the disk drive. It was clean and immaculate; so, it destroyed and debunked the dirty drive theory. But, just to make sure I sucked around the optical sensor with a vacuum and gently brushed it with a Q-tip.
(2) I then watched a you tube video showing how the drive operated (it was a drive supplied with power outside an iMac with a transparent cover unlike the opaque metal cover that we have on our drives). My scientific curiosity started to wonder if somehow the mechanical part (of the electro-mechanical assembly) was locked or jammed. So, I started messing with the arms with the utmost care after watching the video to see if i could move them manually. Yes on some. The main arm that is linked with the drive motor was immovable. The rest I played with a little bit, took great notice in the start of the video to see how the arms looked before inserting a disk. I then put it all back together.
It works now. My guess is that taking it out and then placing it back in along with the resetting options that others have done was the trick. I believe it is a possibility that the hard drive became locked mechanically in some strange manner after ejecting a DVD in conjunction with the uploading of the new OS. I believe the actual removal, reinstallation, and resetting of the drive put everything back into sync. My computer sits in a climate controlled dust free environment. I knew for a fact that this hard drive was OKAY.

Office 2010 MUI in Finnish and Save and Send function not working after upgrading to Lync 2013 MUI

Similar Messages

Maybe you are looking for