Why Siebel and not any other CRM

What all members have to say: Why Siebel and not any other CRM?
Message was edited by:
War

What are you looking for?
I hope it's not related to your nick. ;-)
Seriously, there is no set of rules that makes you decide for or against Siebel.
If Siebel is a good solution for one company, doesn't mean it's a good solution for all companies.
It all depends...

Similar Messages

Why Logic and not protools other than midi

why have users chosen Logic over protools...not a debate but just a little feedback, Thanks.

Not wishing to debate either. The following are my opinions based on having worked on both systems:
- Logic's MIDI editing/arranging capabilities (and ease of access) far exceed those of PT. For me, PT's MIDI implementation is a welcome addition to more recent versions, but it's downright primitive compared to Logic, DP, Cubase, etc.
- Many important MIDI manipulation functions can be carried out non-destructively and in real time, including velocity, gating, transposition, and delay.
- Extensive notation capabilities that come close to those of dedicated notation programs such as Finale and Sibelius
- Audio operations are, in some respects, much easier in Logic than PT. For example, if you have a 1-measure drum loop that you want to run down through an entire track, you need only to place the first instance of it in Logic's Arrange window. Turn loop on and voila, it's done. No copying/pasting required. I can think of other operations that, to me, are much more easily accomplished in Logic than PT but I'm trying to keep this reply brief.
- Aliases of audio regions can be created, so changes to the original region are automatically reflected in all aliases (no sure if PT offers that).
- Compatibility with a wide variety of audio file types with no file type conversion necessary.
- User-definable key commands
- Ability to group tracks in folders (to cut down on eye-clutter, and, to easily mute/solo groups of tracks). I know this can be accomplished with Groups in PT, but having worked on both systems, Logic's folders are more intuitive and easier to deal with.

I can only see Inbox and not any other boxes (eg outbox, drafts, sent...)

Thunderbird has been running OK for months but now I can only see my outbox. I cannot see any way to see anything else! I'd really like to get back to the display that shows the whole list of 'boxes' in, out, etc, and my custom name boxes. These usually appear in a column on the left. But I am stuck in Inbox. I can send mails OK. In fact I can access
Get Mail, Write, Chat (not used), Address Book, and Quick Filter... and there's the search box. I could send a screen shot if you had a way for me to send it.
I feel there's a button somewhere that could sort out my problem... but I've tried everything I can think of.
So for now Thunderbird is of little use :( I hope you can help.
Bob

Please post a screenshot.
http://support.mozilla.org/en-US/kb/how-do-i-create-screenshot-my-problem

An album which i bought from the i tunes store keeps sjumping to the next song half way through the song. It only happens with this album and not any others, how do i stop it doing that? cheers

This is happening with the coldplay album parachutes which i bought the other day and has never worked properly.

Delete the problem track from the iTunes library, allowing iTunes to move the track file to the Trash. Then download the track again from the iTunes Store via this procedure:
http://support.apple.com/kb/ht2519
That fixes the problem for many people. If problems with the track persist, go here:
iTunes Support
and follow the instructions to report the issue to the iTunes Store.
Regards.

I bought a 5th Gen Touch. I use iTunes 12 on two computers. One computer allows me to drag and drop. The other does not.The one that allows it has problems. Any idea as to why I can drag and drop on one and not the other. Both are authorized.

I bought a 5th Gen Touch. I use iTunes 12 on my two computers. I first connected the Touch to my desktop and it allows me to drag and drop mp3 files from my old Classic, which is backed up to a directory. Unfortunately, that computer has gone down before I got a chance to fill the Touch. I have the files on another computer but when I connect the Touch to it, it doesn't allow me to drag and drop the files. I have iCloud set on both systems and I have manual management check marked. I'm not understanding why it allows drag and drop on one PC and not the other when they are both set the same way. My question? What do I need to do to be able to drag and drop in iTunes 12? I didn't do anything special on the computer that allows it so I am at a loss.
Thank you!

Oh, also want to add that the PC I'm currently using is:
Windows Vista Home Premium Service Pack 2
My other PC was:
Windows 7 Ultimate
My MacBook is:
Max OSX 10.5.something (the last update available for it. .8 maybe? haha)
Not sure if this stuff is important, but I thought I'd add it.

Why can one mac access the internet and not the other?

Hi I have just installed a 2nd generation Airport Express base station. I have setup a network and I can connect to it to access the web. Here's the rub, only my Macbook Pro can connect. My Macbook Air cannot connect? A weird error message says (translated from Swedish): Airport has the selfapplied/selfselected IP adress 169.254.67.130 and will not be able to connect to the internet.
Why can one mac access the internet and not the other? Is there something simple that I can do to get more macs to be able to use my Airport Express to access the internet?
Tech details:
Airport Express 2nd generation (just purchased) model 1392
Macbook Pro running 10.8.2
MacBook Air running 10.6.8

It seems the Airbook assigns a dummy IP address so somehow it doesn't reach and receive an IP from the Express. I deleted the previous Express setting restarted the Air connected again, restarted the modem, restarted the Express nothing....
I spoke to the internet provider and the cable modem does not require any username or pw. from the modem to the cable it's one public ip, pure internet is flowing from the modem to the Express but the express doesn't seem to assign any IP address apart from the one assigned to the Macbook Pro.
Do you need a screendump of the settings on the functioning Mac or the faulty one? What settings are you interested in i.e. which tab should it shot?

Why does Safari (or any other browser with up to date Flash player) not play Facebook videos?

Why does Safari (or any other browser with up to date Flash player) not play Facebook videos?

You're welcome. Glad I could help.
If you haven't done so, using Disk Utility in your Applications/Utilities folder.
Thanks for the and Aloha from Big Island.

Why Division is not Mandatory in CRM

Hi ,
I am new to CRM...I am working in SD.
Just want to know why division is not mandatory in CRM like in SD.
Thanks for your time
RamaChandra

Hi Ramachandra,
In CRM, mainly the relationship between tables is built based on GUID field. So in order to extract the data from tables we will use the GUID field as key field. So it's not necessary to have remaining fields as key fields.
You can go through the tables structure and you will be able to understand.
Thanks,
Lakshmi P

Do you know any other CRM where users can do this in interface?

Do you know? In CRM where you can link one record with the other based on the same value of the
field (e.g. you can use Sugar for email, but email is not linked to contacts). This is possible by doing some hacking in the database. Do you know any other CRM where users can do this in interface?

Hi Amanda,
    It could be that DSO_X is a write optimized DSO. Since a Write optimised DSO does not require any activation, it is capable of loading data much faster. Once the data is in BW, you have an exact copy of the R/3 data, so you dont need the PSA and they can be deleted on a regular basis. You have a definite performance improvement in this case.
   As you said a backup is also possible if you have a DSO. Helps in the case of LIS loads, since you already have a copy of the data in BW, you would not need to perform setup activties if you need to do so minor changes.
   It could also be that different transformations are happening at each level of DSO. You would need to check for start and update routines for exactly what changes are being made. for eg. If I need to change some records, i do it in DSO_X, if i need to change these records based on the changes made in DSO_X, i change them while loading to DSO. Further changes can be done while loading to the cube.
Hope this helps,
Regards.

I am working in Pages and am trying to have the same footer on every page ?I went into View/Layout and typed in footer text in the space but it only appears on first page and not any subsequent pages? Thank you.

I am working in Pages on a report and trying to have the same footer on each page. I went to View/Layout, followed instructions, but the footer text only appears on the first page and not any subsequent pages? What should I do differently please? Thank you., Elisabeth

Help is in the Pages forum.

In the photos app I have 2 camera rolls and 1 photo gallery. Each new photo that I take gets stored in one of the camera rolls, but when I back up the photos to my computer it only backs up the one camera roll, and not any of the new picks. Please help

In the photos app I have 2 camera rolls and 1 photo gallery. Each new photo that I take gets stored in one of the camera rolls, but when I back up the photos to my computer it only backs up the one camera roll, and not any of the new picks. In the one I backed up I have 500 plus photos and the other over 1000. I need to back up the 1000 one- camera roll. Any help would be sincerely appreciated. Help .... Please

Try:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
- Reset all settings Already sugested
Go to Settings > General > Reset and tap Reset All Settings.
All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device.
If still problem, make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
Apple Retail Store - Genius Bar

Iphone 6 is using airtime and not any of my 488MB of data I have...?

My phone has been using my airtime for about two weeks now and not any of my data. I have 488MB on my phone but it has not changed at all. once my airtime runs out everything obviously gives errors saying cannot load.

Your question and description is not very clear to me, so hopefully something here will help:
1. Gmail is a service not an app or a place. So you need to access the service with an app - that can be iPhoto, Mail, Outlook or any other mail client, or even a Web Browser like Safari or Firefox.
So you can't "go to GMail" as you write, but instead you go to an application set up to use the GMail service.
2. iPhoto is not a mail client. It's a handy way to email pics to Grandma, but for what you're doing you need to use an app that supports all of the Gmail service. iPhoto doesn't. There is no way around that.
3. How to send to groups will vary depending on what app you use to access the GMail service. All of these apps can receive photos from iPhoto, either - as in the case of Mail and Outlook, via the Share function - or, in the case of all the rest - via a Media Browser.
For help sending to Groups using any of these other apps you need to ask omn their respective forums. But the workflow is quite simple:
Using Mail or Outlook set in the iPhoto Prefereneces:
1. Select the pic(s) you want to share.
2. Choose email from the Share function
3. Make your selections re size etc
4. The email opens up in Mail or Outlook
- from there you need to figure out how to use the email client.
Using any other app:
1. In the mail app create a new email
2. Click on the Attach button or link
3. Use the Media browser to select the pic(s) you want to send
4. Attach them
- from there you need to figure out how to use the email client.
For help accessing your photos in iPhoto see this user tip:
https://discussions.apple.com/docs/DOC-4491

After downloading Pages upgrade I now can only open Word docs and not any of the Page docs I've saved.???

After downloading Pages upgrade I now can only open Word docs and not any of the Page docs I've saved.???

Which version are the document's in?

Hi, dragging jpeg files into i-movie - the selection of jpegs is repeating certain photos and not featuring others, making the entire sequence impossible to view. PLEASE HELP!

Hi, I have been dragging jpeg files into i-movie all week without issue. Now all of a sudden, the selection of jpegs I'm dragging is repeating certain photos and not featuring others, making the entire sequence impossible to view.
Please help, this is urgent for a funeral tomorrow! It didnt happen with any of the other family tributes, they all worked fine.
Many thanks,
Ruth

It worked! Thank you! I finally just finished about 20 minutes ago! It took over 26 hours to complete the process you described, but I stuck with it and it worked. I am glad I didn't give up or "forget it" as some might have suggested. That would have set me back until tomorrow!
Ultimately, it turned out there were 45,910 jpgs created. No wonder it took so many hours to render/display them all. It ended up being about 10 hours before it seemed they were all rendered but the process between them displaying and being able to start really deleting them took a few hours because partly I was asleep and also partly it took forever to do anything. Any action as simple as selecting and right-clicking to Get Info, or emptying the trash, would take 20-30 minutes, a couple times longer. The clock stopped many times for 20-30 minutes at a time, a few times over 30 minutes, before catching back up. My cursor never froze which is what really kept me going, although it was a spinning beach ball for most of the time. I was never so relieved to see my regular cursor as opposed to seeing a spinning beach ball as I was early this morning after about 10 hours!
Once I was able to open a Finder window and select all 45,900 files (I had already deleted 10 in the previous couple hours during experimenting of trying to figure out what would work best), then right-click and select to move all the files to the trash, the process of moving them to the trash took 4.5 hours. Then deleting them from the trash took a couple minutes. There were 21.4 GB!!! No wonder the whole process took 26 hours!
mende1, thank you so much!

When printing from aperture my margins are unequal, even if i set my margins they come out bigger one side and not the other. i am using a macbook pro running osx lion and printing with a canon pro 9000

when printing from aperture my margins are unequal, even if i set my margins they come out bigger one side and not the other. i am using a macbook pro running osx lion and printing with a canon pro 9000.
please can anbody help or advise?

You didn't mention any color calibration being done on your monitor. This is an essential part of any color-correct workflow. What are you using to calibrate your monitor (and your printer)?
Print profiles (for soft-proofing as well as printing) are for specific combinations of paper & printer. The nine you have are each, most likely, for a common paper (perhaps mfr'd by Canon) to be used with your printer.
I don't know what you mean when you say "I choose a high standard print option".
Have you read the User Manual chapter on printing?
Printing Your Images
There is also a good appendix on calibration:
Calibrating Your Aperture System

Why Siebel and not any other CRM

Similar Messages

Maybe you are looking for