Why :system.block_status is always "Query"?
Hi,
When I check the status of block(using :system.block_status),the status is always "QUERY".Why the status never changes to "CHANGED" OR "NEW"??
Can help me??
Thanks.
If your block is a non-db block, then :SYSTEM.FORM_STATUS will return NEW when you run the form and do not change anything. If you type-in any value in any item, its status will change to QUERY.
But if it is a db block, then :SYSTEM.FORM_STATUS will return NEW on form opening, CHANGED when anything is changed on the form and QUERY if you queried it.
You may try with a simple form with just couple of text items and a button on it. Under WHEN-BUTTON-PRESSED trigger, message out the :SYSTEM.FORM_STATUS and see what it returns to you. Then change the block to a DB Block and try the same thing. You'll notice the difference.
You may also look into :SYSTEM.BLOCK_STATUS and :SYSTEM.RECORD_STATUS.
Hope it helps!
Similar Messages
-
Why did all my scroll bars disapear?
I don't have any option in my System Preferences to always turn scroll bars on (as suggested)Sweet... all better now.
I was looking in my FINDER preferences, not my APPLE preferences.
Thanks for clearing that up for me. -
System Image Utility always fails, why?
Hi everyone,
on my clean and fresh install of 10.7.4 Server the System Image Utility always fails to create an image. I want to create a NetInstall image and have put the OS X Lion Installer in /Applications. I can select it in SIU and choose to create a NetInstall image. It asks for the admin pw and always presents an error at the very end: Image creation failed. An unknown error has occured.
If I select to create a NetBoot image instead it fails directly after clicking on the Create button with this slightly different message: Image creation failed. An error has occured. At least it’s no unknown error…
Any ideas what might be causing this? I have succesfully created NetInstall images with 10.6 Server and 10.8 Server, but 10.7 Server somehow won’t play nice.
Thanks
BjörnHi Brian,
I first deleted the Installer and redownloaded it from the App Store, just to make sure there was no problem with it. Even though I now have the 10.7.4 Installer (had 10.7.0 before) nothing has changed. I then went on to set the log level as suggested. I now get different errors based on the chosen log level.
Log level set to debug:
Image creation failed.
*** -[__NSArrayM insertObject:atIndex:]: object cannot be nil
Log level set to verbose:
Image creation failed.
An unknown error has occurred.
I did not see anything helpful in the logs unfortunately. The only noticeable thing mentioned was: Failed to create image from installer media.
Any additional ideas? I will attach both logs here, just in case.
VERBOSE LOG:
Starting image creation.
Workflow Started (2012-09-08 14:08:00 +0200)
Mac OS X Server 10.7.4 (11E53), System Image Utility 10.7.3 (543)
Starting action: Define Image Source (1.3)
Finished running action: Define Image Source
Starting action: Create Image (1.6.2)
Starting image creation process...
Create NetInstall Image
Initiating NetInstall from Installer media.
Creating working path at /Users/vm/Desktop/NetInstall of Install Mac OS X Lion
Creating disk image (Size: 4062 MB)
Finalizing disk image.
created: /Users/vm/Desktop/NetInstall of Install Mac OS X Lion/NetInstall.dmg
Attaching disk image
Copying /Volumes/Mac OS X Install ESD
Preparing the kernel and boot loader for the boot image
/Users/vm/Desktop/NetInstall of Install Mac OS X Lion/i386
/Users/vm/Desktop/NetInstall of Install Mac OS X Lion/i386/x86_64
Copying /Volumes/Mac OS X Install ESD/boot.efi
Copying /Volumes/Mac OS X Install ESD/System/Library/CoreServices/PlatformSupport.plist
Performing post install cleanup
Detaching disk image
"disk4" unmounted.
"disk4" ejected.
Correcting permissions. 501:20 /Users/vm/Desktop/NetInstall of Install Mac OS X Lion
Script is done.
Failed to create image from installer media.
An unknown error has occurred.
NetInstall creation failed.
Image creation process finished...
Stopping image creation.
Image creation failed.
DEBUG LOG:
Starting image creation.
Workflow Started (2012-09-08 13:59:22 +0200)
Mac OS X Server 10.7.4 (11E53), System Image Utility 10.7.3 (543)
Starting action: Define Image Source (1.3)
Finished running action: Define Image Source
Starting action: Create Image (1.6.2)
Starting image creation process...
Create NetInstall Image
Initiating NetInstall from Installer media.
progressPrefix="_progress"
++ progressPrefix=_progress
scriptsDebugKey="DEBUG"
++ scriptsDebugKey=DEBUG
imageIsUDIFKey="1"
++ imageIsUDIFKey=1
mountPoint=""
++ mountPoint=
ownershipInfoKey="501:20"
++ ownershipInfoKey=501:20
destVolFSType="HFS+"
++ destVolFSType=HFS+
installSource="/Volumes/Mac OS X Install ESD"
++ installSource='/Volumes/Mac OS X Install ESD'
dmgTarget="NetInstall"
++ dmgTarget=NetInstall
destPath="/Users/vm/Desktop/NetInstall of Install Mac OS X Lion"
++ destPath='/Users/vm/Desktop/NetInstall of Install Mac OS X Lion'
dmgVolName="NetInstall"
++ dmgVolName=NetInstall
. "${1}/createCommon.sh"
+ . /tmp/niutemp.Yv8Z6Mqx/createCommon.sh
# createCommon.sh
# Common functionality for the Image creation process.
# sourced in by the various SIU scripts
# Copyright © 2007-2011 Apple Inc. All rights reserved.
# Using dscl, create a user account
AddLocalUser()
# $1 volume whose local node database to modify
# $2 long name
# $3 short name
# $4 isAdminUser key
# $5 password data
# $6 password hint
# $7 user picture path
# $8 Language string
local databasePath="/Local/Default/Users/${3}"
local targetVol="${1}"
# Find a free UID between 501 and 599
for ((i=501; i<600; i++)); do
output=`/usr/bin/dscl -f "${targetVol}/var/db/dslocal/nodes/Default" localonly -search /Local/Default/Users UniqueID $i`
# If there is already an account dscl returns it, so we're looking for an empty return value.
if [ "$output" == "" ]; then
break
fi
done
# Create the user record
/usr/bin/dscl -f "${targetVol}/var/db/dslocal/nodes/Default" localonly -create $databasePath
if [ $? != 0 ]; then
echo "Failed to create '${databasePath}'."
return 1
fi
# Add long name
/usr/bin/dscl -f "${targetVol}/var/db/dslocal/nodes/Default" localonly -append $databasePath RealName "${2}"
if [ $? != 0 ]; then
echo "Failed to set the RealName."
return 1
fi
# Add PrimaryGroupID
if [ "${4}" == 1 ]; then
/usr/bin/dscl -f "${targetVol}/var/db/dslocal/nodes/Default" localonly -append $databasePath PrimaryGroupID 80
else
/usr/bin/dscl -f "${targetVol}/var/db/dslocal/nodes/Default" localonly -append $databasePath PrimaryGroupID 20
fi
if [ $? != 0 ]; then
echo "Failed to set the PrimaryGroupID."
return 1
fi
# Add UniqueID
/usr/bin/dscl -f "${targetVol}/var/db/dslocal/nodes/Default" localonly -append $databasePath UniqueID ${i}
if [ $? != 0 ]; then
echo "Failed to set the UniqueID."
return 1
fi
# Add Home Directory entry
/usr/bin/dscl -f "${targetVol}/var/db/dslocal/nodes/Default" localonly -append $databasePath NFSHomeDirectory /Users/${3}
if [ $? != 0 ]; then
echo "Failed to set the NFSHomeDirectory."
fi
if [ "${6}" != "" ]; then
/usr/bin/dscl -f "${targetVol}/var/db/dslocal/nodes/Default" localonly -append $databasePath AuthenticationHint "${6}"
if [ $? != 0 ]; then
echo "Failed to set the AuthenticationHint."
return 1
fi
fi
/usr/bin/dscl -f "${targetVol}/var/db/dslocal/nodes/Default" localonly -append $databasePath picture "${7}"
if [ $? != 0 ]; then
echo "Failed to set the picture."
return 1
fi
/usr/bin/dscl -f "${targetVol}/var/db/dslocal/nodes/Default" localonly -passwd $databasePath "${5}"
if [ $? != 0 ]; then
echo "Failed to set the passwd."
return 1
fi
# Add shell
/usr/bin/dscl -f "${targetVol}/var/db/dslocal/nodes/Default" localonly -append $databasePath UserShell "/bin/bash"
if [ $? != 0 ]; then
echo "Failed to set the UserShell."
return 1
fi
# Create Home directory
if [ -e "/System/Library/User Template/${8}.lproj/" ]; then
/usr/bin/ditto "/System/Library/User Template/${8}.lproj/" "${targetVol}/Users/${3}"
else
/usr/bin/ditto "/System/Library/User Template/English.lproj/" "${targetVol}/Users/${3}"
fi
if [ $? != 0 ]; then
echo "Failed to copy the User Template."
return 1
fi
/usr/sbin/chown -R $i:$i "${targetVol}/Users/${3}"
if [ $? != 0 ]; then
echo "Failed to set ownership on the User folder."
return 1
fi
# Copies a list of files (full paths contained in the file at $1) from source to the path specified in $2
CopyEntriesFromFileToPath()
local theFile="$1"
local theDest="$2"
local opt=""
if [ "${scriptsDebugKey}" == "VERBOSE" -o "${scriptsDebugKey}" == "DEBUG" ]; then
opt="-v"
fi
while read FILE
do
if [ -e "${FILE}" ]; then
local leafName=`basename "${FILE}"`
if [ "${scriptsDebugKey}" == "VERBOSE" -o "${scriptsDebugKey}" == "DEBUG" ]; then
echo "Copying ${FILE}."
fi
/usr/bin/ditto $opt "${FILE}" "${theDest}/${leafName}" || return 1
fi
done < "${theFile}"
return 0
# Copies a list of packages (full path, destination pairs contained in the file at $1) from source to .../System/Installation/Packages/
CopyPackagesWithDestinationsFromFile()
local theFile="$1"
local opt=""
if [ "${scriptsDebugKey}" == "VERBOSE" -o "${scriptsDebugKey}" == "DEBUG" ]; then
opt="-v"
fi
while read FILE
do
if [ -e "${FILE}" ]; then
local leafName=`basename "${FILE}"`
if [ "${scriptsDebugKey}" == "VERBOSE" -o "${scriptsDebugKey}" == "DEBUG" ]; then
echo "Copying ${FILE}."
fi
read SUB_PATH
/usr/bin/ditto $opt "${FILE}" "${mountPoint}/Packages/${SUB_PATH}${leafName}" || return 1
fi
done < "${theFile}"
return 0
# Create an installer package in ${1} wrapping the supplied script ${2}
CreateInstallPackageForScript()
local tempDir="$1"
local scriptPath="$2"
local scriptName=`basename "${scriptPath}"`
local entryDir=`pwd`
local opt=""
if [ "${scriptsDebugKey}" == "VERBOSE" -o "${scriptsDebugKey}" == "DEBUG" ]; then
echo "Create installer for script ${scriptName}"
if [ "${scriptsDebugKey}" == "VERBOSE" -o "${scriptsDebugKey}" == "DEBUG" ]; then
opt="-v"
fi
fi
# shouldn't exist on entry...
if [ -e "${tempDir}/emptyDir" ]; then
/bin/rm -rf "${tempDir}/emptyDir"
fi
# make some directories to work in
/bin/mkdir $opt -p "${tempDir}/${scriptName}.pkg/Contents/Resources" || return 1
/bin/mkdir $opt "${tempDir}/emptyDir" || return 1
# Create Archive.pax.gz
cd "${tempDir}/emptyDir"
/bin/pax -w -x cpio -f "${tempDir}/${scriptName}.pkg/Contents/Archive.pax" .
/usr/bin/gzip "${tempDir}/${scriptName}.pkg/Contents/Archive.pax"
cd "${entryDir}"
# Create the Archive.bom file
/usr/bin/mkbom "${tempDir}/emptyDir/" "${tempDir}/${scriptName}.pkg/Contents/Archive.bom" || return 1
# Create the Info.plist
/bin/cat > "${tempDir}/${scriptName}.pkg/Contents/Info.plist" << END
<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
<plist version="1.0">
<dict>
<key>CFBundleIdentifier</key>
<string>com.apple.server.SystemImageUtility.${scriptName}</string>
<key>CFBundleShortVersionString</key>
<string>1</string>
<key>IFMajorVersion</key>
<integer>1</integer>
<key>IFMinorVersion</key>
<integer>0</integer>
<key>IFPkgFlagDefaultLocation</key>
<string>/tmp</string>
<key>IFPkgFlagInstallFat</key>
<false/>
<key>IFPkgFlagIsRequired</key>
<false/>
<key>IFPkgFormatVersion</key>
<real>0.10000000149011612</real>
</dict>
</plist>
END
echo "pkmkrpkg1" > "${tempDir}/${scriptName}.pkg/Contents/PkgInfo"
echo "major: 1\nminor: 0" > "${tempDir}/${scriptName}.pkg/Contents/Resources/package_version"
# Copy the script
/bin/cp "$scriptPath" "${tempDir}/${scriptName}.pkg/Contents/Resources/postflight"
# clean up
/bin/rm -r "${tempDir}/emptyDir"
return 0
# Validate or create the requested directory
CreateOrValidatePath()
local targetDir="$1"
if [ ! -d "${targetDir}" ]; then
if [ "${scriptsDebugKey}" == "VERBOSE" -o "${scriptsDebugKey}" == "DEBUG" ]; then
echo "Creating working path at ${targetDir}"
fi
/bin/mkdir -p "${targetDir}" || return 1
fi
# If any exist, apply any user accounts
CreateUserAccounts()
# $1 volume whose local node database to modify
local count="${#userFullName[*]}"
local targetVol="${1}"
if [ $count -gt 0 ]; then
if [ "${scriptsDebugKey}" == "VERBOSE" -o "${scriptsDebugKey}" == "DEBUG" ]; then
echo "Adding $count user account(s) to the image"
fi
for ((index=0; index<$count; index++)); do
if [ "${scriptsDebugKey}" == "VERBOSE" -o "${scriptsDebugKey}" == "DEBUG" ]; then
echo "Adding user ${userFullName[$index]}"
fi
#lay down user here
AddLocalUser "${targetVol}" "${userFullName[$index]}" "${userUnixName[$index]}" "${userIsAdmin[$index]}" "${userPassword[$index]}" "${userPassHint[$index]}" "${userImagePath[$index]}" "${userLanguage[$index]}"
if [ $? != 0 ]; then
echo "Failed to create the User '${userUnixName[$index]}'."
return 1
fi
done
# "touch"
/usr/bin/touch "${targetVol}/private/var/db/.AppleSetupDone"
/usr/bin/touch "${targetVol}/Library/Receipts/.SetupRegComplete"
fi
# retry the hdiutil detach until we either time out or it succeeds
retry_hdiutil_detach()
local mount_point="${1}"
local tries=0
local forceAt=0
local limit=24
local opt=""
forceAt=$(($limit - 1))
while [ $tries -lt $limit ]; do
tries=$(( tries + 1 ))
/bin/sleep 5
echo "Attempting to detach the disk image again..."
/usr/bin/hdiutil detach "${mount_point}" $opt
if [ $? -ne 0 ]; then
# Dump a list of any still open files on the mountPoint
if [ "${scriptsDebugKey}" == "DEBUG" ]; then
/usr/sbin/lsof +fg "${mount_point}"
fi
if [ $tries -eq $forceAt ]; then
echo "Failed to detach disk image at '${mount_point}' normally, adding -force."
opt="-force"
fi
if [ $tries -eq $limit ]; then
echo "Failed to detach disk image at '${mount_point}'."
exit 1
fi
else
tries=$limit
fi
done
# Create the dyld shared cache files
DetachAndRemoveMount()
local theMount="${1}"
if [ "${scriptsDebugKey}" == "VERBOSE" -o "${scriptsDebugKey}" == "DEBUG" ]; then
echo "Detaching disk image"
# Dump a list of any still open files on the mountPoint
if [ "${scriptsDebugKey}" == "DEBUG" ]; then
/usr/sbin/lsof +fg "${theMount}"
fi
fi
# Finally detach the image and dispose the mountPoint directory
/usr/bin/hdiutil detach "${theMount}" || retry_hdiutil_detach "${theMount}" || return 1
/bin/rmdir "${theMount}" || return 1
return 0
# If the pieces exist, enable remote access for the shell image
EnableRemoteAccess()
local srcVol="${1}"
local opt=""
if [ -e "${srcVol}/usr/lib/pam/pam_serialnumber.so.2" ]; then
if [ "${scriptsDebugKey}" == "VERBOSE" -o "${scriptsDebugKey}" == "DEBUG" ]; then
echo "Enabling shell image remote access support"
if [ "${scriptsDebugKey}" == "VERBOSE" -o "${scriptsDebugKey}" == "DEBUG" ]; then
opt="-v"
fi
fi
# install some things (again which aren't part of BaseSystem) needed for remote ASR installs
/usr/bin/ditto $opt "${srcVol}/usr/lib/pam/pam_serialnumber.so.2" "${mountPoint}/usr/lib/pam/pam_serialnumber.so.2" || return 1
if [ -e "${srcVol}/usr/sbin/installer" ]; then
/usr/bin/ditto $opt "${srcVol}/usr/sbin/installer" "${mountPoint}/usr/sbin/installer" || return 1
fi
# copy the sshd config and add our keys to the end of it
if [ -e "${srcVol}/etc/sshd_config" ]; then
/bin/cat "${srcVol}/etc/sshd_config" - > "${mountPoint}/etc/sshd_config" << END
HostKey /private/var/tmp/ssh_host_key
HostKey /private/var/tmp/ssh_host_rsa_key
HostKey /private/var/tmp/ssh_host_dsa_key
END
fi
fi
return 0
# If it exists, install the sharing names and/or directory binding support to the install image
HandleNetBootClientHelper()
local tempDir="${1}"
local targetVol="${2}"
local opt=""
if [ "${scriptsDebugKey}" == "VERBOSE" -o "${scriptsDebugKey}" == "DEBUG" ]; then
opt="-v"
fi
if [ -e "${tempDir}/bindingNames.plist" ]; then
if [ "${scriptsDebugKey}" == "VERBOSE" -o "${scriptsDebugKey}" == "DEBUG" ]; then
echo "Installing Directory Service binding information"
fi
/usr/bin/ditto $opt "${tempDir}/bindingNames.plist" "${targetVol}/etc/bindingNames.plist" || return 1
/usr/sbin/chown root:wheel "${targetVol}/etc/bindingNames.plist"
/bin/chmod 644 "${targetVol}/etc/bindingNames.plist"
fi
if [ -e "${tempDir}/sharingNames.plist" ]; then
if [ "${scriptsDebugKey}" == "VERBOSE" -o "${scriptsDebugKey}" == "DEBUG" ]; then
echo "Installing Sharing Names support"
fi
/usr/bin/ditto $opt "${tempDir}/sharingNames.plist" "${targetVol}/etc/sharingNames.plist" || return 1
/usr/sbin/chown root:wheel "${targetVol}/etc/sharingNames.plist"
/bin/chmod 644 "${targetVol}/etc/sharingNames.plist"
fi
if [ -e "${tempDir}/NetBootClientHelper" ]; then
/usr/bin/ditto $opt "${tempDir}/NetBootClientHelper" "${targetVol}/usr/sbin/NetBootClientHelper" || return 1
/usr/sbin/chown root:wheel "${targetVol}/usr/sbin/NetBootClientHelper"
/bin/chmod 555 "${targetVol}/usr/sbin/NetBootClientHelper"
/usr/bin/ditto $opt "${tempDir}/com.apple.NetBootClientHelper.plist" "${targetVol}/System/Library/LaunchDaemons/com.apple.NetBootClientHelper.plist" || return 1
/usr/sbin/chown root:wheel "${targetVol}/System/Library/LaunchDaemons/com.apple.NetBootClientHelper.plist"
/bin/chmod 644 "${targetVol}/System/Library/LaunchDaemons/com.apple.NetBootClientHelper.plist"
# finally, make sure it isn't disabled...
/usr/libexec/PlistBuddy -c "Delete :com.apple.NetBootClientHelper" "${targetVol}/var/db/launchd.db/com.apple.launchd/overrides.plist" > /dev/null 2>&1
fi
return 0
# If any exist, install configuration profiles to the install image
InstallConfigurationProfiles()
local tempDir="${1}"
local targetVol="${2}"
local profilesDir="${targetVol}/var/db/ConfigurationProfiles"
local opt=""
if [ "${scriptsDebugKey}" == "VERBOSE" -o "${scriptsDebugKey}" == "DEBUG" ]; then
opt="-v"
fi
if [ -e "${tempDir}/configProfiles.txt" ]; then
if [ "${scriptsDebugKey}" == "VERBOSE" -o "${scriptsDebugKey}" == "DEBUG" ]; then
echo "Installing Configuration Profiles"
fi
/bin/mkdir -p "${profilesDir}/Setup" || return 1
# Make sure the perms are correct
/usr/sbin/chown root:wheel "${profilesDir}"
/bin/chmod 755 "${profilesDir}"
/usr/sbin/chown root:wheel "${profilesDir}/Setup"
/bin/chmod 755 "${profilesDir}/Setup"
/usr/bin/touch "${profilesDir}/.profilesAreInstalled"
CopyEntriesFromFileToPath "${tempDir}/configProfiles.txt" "${profilesDir}/Setup" || return 1
# Enable MCX debugging
if [ 1 == 1 ]; then
if [ -e "${targetVol}/Library/Preferences/com.apple.MCXDebug.plist" ]; then
/usr/libexec/PlistBuddy -c "Delete :debugOutput" "${targetVol}/Library/Preferences/com.apple.MCXDebug.plist" > /dev/null 2>&1
/usr/libexec/PlistBuddy -c "Delete :collateLogs" "${targetVol}/Library/Preferences/com.apple.MCXDebug.plist" > /dev/null 2>&1
fi
/usr/libexec/PlistBuddy -c "Add :debugOutput string -2" "${targetVol}/Library/Preferences/com.apple.MCXDebug.plist" > /dev/null 2>&1
/usr/libexec/PlistBuddy -c "Add :collateLogs string 1" "${targetVol}/Library/Preferences/com.apple.MCXDebug.plist" > /dev/null 2>&1
fi
fi
# Converts a list of scripts (full paths contained in the file at $1) into packages in $3
InstallScriptsFromFile()
local tempDir="${1}"
local theFile="${2}"
local targetDir="${3}"
if [ "${scriptsDebugKey}" == "VERBOSE" -o "${scriptsDebugKey}" == "DEBUG" ]; then
echo "Converting scripts into install packages"
fi
while read FILE
do
if [ -e "${FILE}" ]; then
# make an installer package out of the script
CreateInstallPackageForScript "$tempDir" "${FILE}" || return 1
# copy the resulting package to the Packages directory
local leafName=`basename "${FILE}"`
/usr/bin/ditto $opt "${tempDir}/${leafName}.pkg" "${targetDir}/${leafName}.pkg" || return 1
# clean up
/bin/rm -r "${tempDir}/${leafName}.pkg"
fi
done < "${theFile}"
return 0
# Prepare the source by deleting stuff we don't want to copy if sourcing a volume
PostFlightDestination()
local tempDir="${1}"
local destDir="${2}"
local opt=""
if [ "${scriptsDebugKey}" == "VERBOSE" -o "${scriptsDebugKey}" == "DEBUG" ]; then
echo "Performing post install cleanup"
if [ "${scriptsDebugKey}" == "VERBOSE" -o "${scriptsDebugKey}" == "DEBUG" ] ; then
opt="-v"
fi
fi
# delete the DS indices to force reindexing...
if [ -e "${mountPoint}/var/db/dslocal/indices/Default/index" ]; then
/bin/rm $opt "${mountPoint}/var/db/dslocal/indices/Default/index"
fi
# detach the disk and remove the mount folder
DetachAndRemoveMount "${mountPoint}"
if [ $? != 0 ]; then
echo "Failed to detach and clean up the mount at '${mountPoint}'."
return 1
fi
echo "Correcting permissions. ${ownershipInfoKey} $destDir"
/usr/sbin/chown -R "${ownershipInfoKey}" "$destDir"
# Prepare the source by deleting stuff we don't want to copy if sourcing a volume
PreCleanSource()
local srcVol="$1"
local opt=""
if [ "${scriptsDebugKey}" == "VERBOSE" -o "${scriptsDebugKey}" == "DEBUG" ]; then
if [ "${scriptsDebugKey}" == "VERBOSE" -o "${scriptsDebugKey}" == "DEBUG" ] ; then
opt="-v"
fi
fi
if [ -e "$srcVol/private/var/vm/swapfile*" ]; then
if [ "${scriptsDebugKey}" == "VERBOSE" -o "${scriptsDebugKey}" == "DEBUG" ]; then
echo "Removing swapfiles on $1"
fi
/bin/rm $opt "$srcVol/private/var/vm/swapfile*"
fi
if [ -d "$srcVol/private/tmp" ]; then
if [ "${scriptsDebugKey}" == "VERBOSE" -o "${scriptsDebugKey}" == "DEBUG" ]; then
echo "Cleaning out /private/tmp on $1"
fi
/bin/rm -r $opt "$srcVol/private/tmp/*"
fi
if [ -d "$srcVol/private/var/tmp" ]; then
if [ "${scriptsDebugKey}" == "VERBOSE" -o "${scriptsDebugKey}" == "DEBUG" ]; then
echo "Cleaning out /private/var/tmp on $1"
fi
/bin/rm -r $opt "$srcVol/private/var/tmp/*"
fi
if [ "${scriptsDebugKey}" == "VERBOSE" -o "${scriptsDebugKey}" == "DEBUG" ]; then
echo "Cleaning out devices and volumes on $1"
fi
if [ -d "$srcVol/Volumes" ]; then
/bin/rm -r $opt "$srcVol/Volumes/*"
fi
if [ -d "$srcVol/dev" ]; then
/bin/rm $opt "$srcVol/dev/*"
fi
if [ -d "$srcVol/private/var/run" ]; then
/bin/rm -r $opt "$srcVol/private/var/run/*"
fi
# Copy kernel and build the kext cache on the boot image
PrepareKernelAndKextCache()
local srcDir="$1"
local destDir="$2"
local opt=""
if [ "${scriptsDebugKey}" == "VERBOSE" -o "${scriptsDebugKey}" == "DEBUG" ]; then
echo "Preparing the kernel and kext cache for t /bin/rmdir "${theMount}" || return 1
return 0
# If the pieces exist, enable remote access for the shell image
EnableRemoteAccess()
local srcVol="${1}"
local opt=""
if [ -e "${srcVol}/usr/lib/pam/pam_serialnumber.so.2" ]; then
if [ "${scriptsDebugKey}" == "VERBOSE" -o "${scriptsDebugKey}" == "DEBUG" ]; then
echo "Enabling shell image remote access support"
if [ "${scriptsDebugKey}" == "VERBOSE" -o "${scriptsDebugKey}" == "DEBUG" ]; then
opt="-v"
fi
fi
# install some things (again which aren't part of BaseSystem) needed for remote ASR installs
/usr/bin/ditto $opt "${srcVol}/usr/lib/pam/pam_serialnumber.so.2" "${mountPoint}/usr/lib/pam/pam_serialnumber.so.2" || return 1
if [ -e "${srcVol}/usr/sbin/installer" ]; then
/usr/bin/ditto $opt "${srcVol}/usr/sbin/installer" "${mountPoint}/usr/sbin/installer" || return 1
fi
# copy the sshd config and add our keys to the end of it
if [ -e "${srcVol}/etc/sshd_config" ]; then
/bin/cat "${srcVol}/etc/sshd_config" - > "${mountPoint}/etc/sshd_config" << END
HostKey /private/var/tmp/ssh_host_key
HostKey /private/var/tmp/ssh_host_rsa_key
HostKey /private/var/tmp/ssh_host_dsa_key
END
fi
fi
return 0
# If it exists, install the sharing names and/or directory binding support to the install image
HandleNetBootClientHelper()
local tempDir="${1}"
local targetVol="${2}"
local opt=""
if [ "${scriptsDebugKey}" == "VERBOSE" -o "${scriptsDebugKey}" == "DEBUG" ]; then
opt="-v"
fi
if [ -e "${tempDir}/bindingNames.plist" ]; then
if [ "${scriptsDebugKey}" == "VERBOSE" -o "${scriptsDebugKey}" == "DEBUG" ]; then
echo "Installing Directory Service binding information"
fi
/usr/bin/ditto $opt "${tempDir}/bindingNames.plist" "${targetVol}/etc/bindingNames.plist" || return 1
/usr/sbin/chown root:wheel "${targetVol}/etc/bindingNames.plist"
/bin/chmod 644 "${targetVol}/etc/bindingNames.plist"
fi
if [ -e "${tempDir}/sharingNames.plist" ]; then
if [ "${scriptsDebugKey}" == "VERBOSE" -o "${scriptsDebugKey}" == "DEBUG" ]; then
echo "Installing Sharing Names support"
fi
/usr/bin/ditto $opt "${tempDir}/sharingNames.plist" "${targetVol}/etc/sharingNames.plist" || return 1
/usr/sbin/chown root:wheel "${targetVol}/etc/sharingNames.plist"
/bin/chmod 644 "${targetVol}/etc/sharingNames.plist"
fi
if [ -e "${tempDir}/NetBootClientHelper" ]; then
/usr/bin/ditto $opt "${tempDir}/NetBootClientHelper" "${targetVol}/usr/sbin/NetBootClientHelper" || return 1
/usr/sbin/chown root:wheel "${targetVol}/usr/sbin/NetBootClientHelper"
/bin/chmod 555 "${targetVol}/usr/sbin/NetBootClientHelper"
/usr/bin/ditto $opt "${tempDir}/com.apple.NetBootClientHelper.plist" "${targetVol}/System/Library/LaunchDaemons/com.apple.NetBootClientHelper.plist" || return 1
/usr/sbin/chown root:wheel "${targetVol}/System/Library/LaunchDaemons/com.apple.NetBootClientHelper.plist"
/bin/chmod 644 "${targetVol}/System/Library/LaunchDaemons/com.apple.NetBootClientHelper.plist"
# finally, make sure it isn't disabled...
/usr/libexmountPoint=`mktemp -d "/tmp/mnt.XXXXXXXX"`
errExit()
echo "Execution of '`basename ${0}`' failed. Cleaning up."
# detach the disk and remove the mount folder
DetachAndRemoveMount "${mountPoint}"
/bin/rm -r "${destPath}"
exit 1
# Set up for script debugging
debug_opt=""
if [ "${scriptsDebugKey}" == "VERBOSE" -o "${scriptsDebugKey}" == "DEBUG" ] ; then
debug_opt="-v"
fi
# Prepare the destination
CreateOrValidatePath "$destPath" || errExit
# update progress information
echo "${progressPrefix}_creatingImage_"
if [ -e "${installSource}/BaseSystem.dmg" ]; then
size=$2
if [ "${scriptsDebugKey}" == "VERBOSE" -o "${scriptsDebugKey}" == "DEBUG" ] ; then
echo "Creating disk image (Size: $size MB)"
fi
/usr/bin/hdiutil create "$destPath/$dmgTarget" -megabytes $size -volname "${dmgVolName}" -uid 0 -gid 80 -mode 1775 -layout "SPUD" -fs "$destVolFSType" -stretch 500g -ov -puppetstrings || errExit
echo "${progressPrefix}_copyingSource_"
if [ "${scriptsDebugKey}" == "VERBOSE" -o "${scriptsDebugKey}" == "DEBUG" ] ; then
echo "Attaching disk image"
fi
/usr/bin/hdiutil attach "${destPath}/${dmgTarget}.dmg" -owners on -nobrowse -noautoopen -mountpoint "${mountPoint}" -quiet || errExit
# Copy source Volume base system to
/usr/bin/ditto $debug_opt "${installSource}" "${mountPoint}" || errExit
else
echo "This does not appear to be a Mac OS X Install DVD."
errExit
fi
# If adding any additional packages or scripts
if [ -e "${1}/OSInstall.collection" ]; then
/usr/bin/ditto $debug_opt "${1}/OSInstall.collection" "${mountPoint}/Packages/OSInstall.collection" || errExit
/usr/sbin/chown root:wheel "${mountPoint}/Packages/OSInstall.collection"
# If adding any additional packages
if [ -e "${1}/additionalPackages.txt" ]; then
CopyPackagesWithDestinationsFromFile "${1}/additionalPackages.txt" || errExit
fi
# If adding any scripts
if [ -e "${1}/additionalScripts.txt" ]; then
InstallScriptsFromFile "${1}" "${1}/additionalScripts.txt" "${mountPoint}/Packages" || errExit
fi
fi
# If it exists, install the partition data onto the install image
ProcessAutoPartition "${1}" || errExit
# If it exists, install minstallconfig.xml (AutoInstall data) onto the install image
ProcessMinInstall "${1}" || errExit
# update progress information
echo "${progressPrefix}_buildingBooter_"
# Copy kernel and boot loader
if [ "${scriptsDebugKey}" == "VERBOSE" -o "${scriptsDebugKey}" == "DEBUG" ]; then
echo "Preparing the kernel and boot loader for the boot image"
fi
# make sure this doesn't exist
if [ -e "${destPath}/i386" ]; then
/bin/rm -rf "${destPath}/i386"
fi
/bin/mkdir -p $debug_opt "${destPath}/i386/x86_64" || errExit
# copy these directly off the install media
/usr/bin/ditto $debug_opt "${installSource}/boot.efi" "${destPath}/i386/booter" || errExit
/usr/bin/chflags nohidden "${destPath}/i386/booter"
# Grab the relevant portion of the com.apple.Boot.plist
kernelFlags=`/usr/libexec/PlistBuddy -c "print :'Kernel Flags'" "${installSource}/Library/Preferences/SystemConfiguration/com.apple.Boot.plist"`
/usr/libexec/PlistBuddy -c "add :'Kernel Flags' string ${kernelFlags}" "${destPath}/i386/com.apple.Boot.plist" > /dev/null 2>&1
/usr/bin/ditto $debug_opt "${installSource}/System/Library/CoreServices/PlatformSupport.plist" "${destPath}/i386/PlatformSupport.plist" || errExit
# extract the kernel & kernelcache for the boot shell
/usr/bin/lipo -extract i386 "${mountPoint}/kernelcache" -output "${destPath}/i386/kernelcache" || errExit
/usr/bin/lipo -extract x86_64 "${mountPoint}/kernelcache" -output "${destPath}/i386/x86_64/kernelcache" || errExit
# Apply choice changes, if any
if [ -e "${1}/MacOSXInstaller.choiceChanges" ]; then
echo "Copy over package choice selection."
/usr/bin/ditto $debug_opt "${1}/MacOSXInstaller.choiceChanges" "${mountPoint}/Packages/Extras/MacOSXInstaller.choiceChanges"
fi
# update progress information
echo "${progressPrefix}_finishingUp_"
# perform the final cleanup
PostFlightDestination "${1}" "$destPath" || errExit
errExit
Vol/private/tmp" ]; then
if [ "${scriptsDebugKey}" == "VERBOSE" -o "${scriptsDebugKey}" == "DEBUG" ]; then
echo "Cleaning out /private/tmp on $1"
fi
/bin/rm -r $opt "$srcVol/private/tmp/*"
fi
if [ -d "$srcVol/private/var/tmp" ]; then
if [ "${scriptsDebugKey}" == "VERBOSE" -o "${scriptsDebugKey}" == "DEBUG" ]; then
echo "Cleaning out /private/var/tmp on $1"
fi
/bin/rm -r $opt "$srcVol/private/var/tmp/*"
fi
if [ "${scriptsDebugKey}" == "VERBOSE" -o "${scriptsDebugKey}" == "DEBUG" ]; then
echo "Cleaning out devices and volumes on $1"
fi
if [ -d "$srcVol/Volumes" ]; then
/bin/rm -r $opt "$srcVol/Volumes/*"
fi
if [ -d "$srcVol/dev" ]; then
/bin/rm $opt "$srcVol/dev/*"
fi
if [ -d "$srcVol/private/var/run" ]; then
/bin/rm -r $opt "$srcVol/private/var/run/*"
fi
# Copy kernel and build the kext cache on the boot image
PrepareKernelAndKextCache()
local srcDir="$1"
local destDir="$2"
local opt=""
if [ "${scriptsDebugKey}" == "VERBOSE" -o "${scriptsDebugKey}" == "DEBUG" ]; then
echo "Preparing the kernel and kext cache for tPERCENT:0.000000
PERCENT:4.332841
PERCENT:8.985722
PERCENT:12.358444
PERCENT:14.524864
PERCENT:16.617430
PERCENT:19.522402
PERCENT:21.614967
PERCENT:23.535204
PERCENT:26.070902
PERCENT:29.271296
PERCENT:33.111767
PERCENT:38.847858
PERCENT:42.343674
PERCENT:44.707043
PERCENT:46.578041
PERCENT:49.138355
PERCENT:51.772526
PERCENT:55.563763
PERCENT:58.567207
PERCENT:62.210735
PERCENT:64.795670
PERCENT:69.719353
PERCENT:74.741508
PERCENT:77.055641
PERCENT:79.591331
PERCENT:83.013290
PERCENT:85.548988
PERCENT:88.010834
PERCENT:91.728210
PERCENT:97.710487
PERCENT:100.000000
PERCENT:-1.000000
Finalizing disk image.
created: /Users/vm/Desktop/NetInstall of Install Mac OS X Lion/NetInstall.dmg
/bin/rmdir "${theMount}" || return 1
return 0
# If the pieces exist, enable remote access for the shell image
EnableRemoteAccess()
local srcVol="${1}"
local opt=""
if [ -e "${srcVol}/usr/lib/pam/pam_serialnumber.so.2" ]; then
if [ "${scriptsDebugKey}" == "VERBOSE" -o "${scriptsDebugKey}" == "DEBUG" ]; then
echo "Enabling shell image remote access support"
if [ "${scriptsDebugKey}" == "VERBOSE" -o "${scriptsDebugKey}" == "DEBUG" ]; then
opt="-v"
fi
fi
# install some things (again which aren't part of BaseSystem) needed for remote ASR installs
/usr/bin/ditto $opt "${srcVol}/usr/lib/pam/pam_serialnumber.so.2" "${mountPoint}/usr/lib/pam/pam_serialnumber.so.2" || return 1
if [ -e "${srcVol}/usr/sbin/installer" ]; then
/usr/bin/ditto $opt "${srcVol}/usr/sbin/installer" "${mountPoint}/usr/sbin/installer" || return 1
fi
# copy the sshd config and add our keys to the end of it
if [ -e "${srcVol}/etc/sshd_config" ]; then
/bin/cat "${srcVol}/etc/sshd_config" - > Creating working path at /Users/vm/Desktop/NetInstall of Install Mac OS X Lion
Creating disk image (Size: 4062 MB)
/tmp/ssh_host_dsa_key
END
fi
fi
return 0
# If it exists, install the sharing names and/or directory binding support to the install image
HandleNetBootClientHelper()
local tempDir="${1}"
local targetVol="${2}"
local opt=""
if [ "${scriptsDebugKey}" == "VERBOSE" -o "${scriptsDebugKey}" == "DEBUG" ]; then
opt="-v"
fi
if [ -e "${tempDir}/bindingNames.plist" ]; then
if [ "${scriptsDebugKey}" == "VERBOSE" -o "${scriptsDebugKey}" == "DEBUG" ]; then
echo "Installing Directory Service binding information"
fi
/usr/bin/ditto $opt "${tempDir}/bindingNames.plist" "${targetVol}/etc/bindingNames.plist" || return 1
/usr/sbin/chown root:wheel "${targetVol}/etc/bindingNames.plist"
/bin/chmod 644 "${targetVol}/etc/bindingNames.plist"
fi
if [ -e "${tempDir}/sharingNames.plist" ]; then
if [ "${scriptsDebugKey}" == "VERBOSE" -o "${scriptsDebugKey}" == "DEBUG" ]; then
echo "Installing Sharing Names support"
fi
/usr/bin/ditto $opt "${tempDir}/sharingNames.plist" "${targetVol}/etc/sharingNames.plist" || return 1
/usr/sbin/chown root:wheel "${targetVol}/etc/sharingNames.plist"
/bin/chmod 644 "${targetVol}/etc/sharingNames.plist"
fi
if [ -e "${tempDir}/NetBootClientHelper" ]; then
/usr/bin/ditto $opt "${tempDir}/NetBootClientHelper" "${targetVol}/usr/sbin/NetBootClientHelper" || return 1
/usr/sbin/chown root:wheel "${targetVol}/usr/sbin/NetBootClientHelper"
/bin/chmod 555 "${targetVol}/usr/sbin/NetBootClientHelper"
/usr/bin/ditto $opt "${tempDir}/com.apple.NetBootClientHelper.plist" "${targetVol}/System/Library/LaunchDaemons/com.apple.NetBootClientHelper.plist" || return 1
/usr/sbin/chown root:wheel "${targetVol}/System/Library/LaunchDaemons/com.apple.NetBootClientHelper.plist"
/bin/chmod 644 "${targetVol}/System/Library/LaunchDaemons/com.apple.NetBootClientHelper.plist"
# finally, make sure it isn't disabled...
/usr/libex
# update progress information
echo "${progressPrefix}_creatingImage_"
if [ -e "${installSource}/BaseSystem.dmg" ]; then
size=$2
if [ "${scriptsDebugKey}" == "VERBOSE" -o "${scriptsDebugKey}" == "DEBUG" ] ; then
echo "Creating disk image (Size: $size MB)"
fi
/usr/bin/hdiutil create "$destPath/$dmgTarget" -megabytes $size -volname "${dmgVolName}" -uid 0 -gid 80 -mode 1775 -layout "SPUD" -fs "$destVolFSType" -stretch 500g -ov -puppetstrings || errExit
echo "${progressPrefix}_copyingSource_"
if [ "${scriptsDebugKey}" == "VERBOSE" -o "${scriptsDebugKey}" == "DEBUG" ] ; then
echo "Attaching disk image"
fi
/usr/bin/hdiutil attach "${destPath}/${dmgTarget}.dmg" -owners on -nobrowse -noautoopen -mountpoint "${mountPoint}" -quiet || errExit
# Copy source Volume base system to
/usr/bin/ditto $debug_opt "${installSource}" "${mountPoint}" || errExit
else
echo "This does not appear to be a Mac OS X Install DVD."
errExit
fi
# If adding any additional packages or scripts
if [ -e "${1}/OSInstall.collection" ]; then
/usr/bin/ditto $debug_opt "${1}/OSInstall.collection" "${mountPoint}/Packages/OSInstall.collection" || errExit
/usr/sbin/chown root:wheel "${mountPoint}/Packages/OSInstall.collection"
# If adding any additional packages
if [ -e "${1}/additionalPackages.txt" ]; then
CopyPackagesWithDestinationsFromFile "${1}/additionalPackages.txt" || errExit
fi
# If adding any scripts
if [ -e "${1}/additionalScripts.txt" ]; then
InstallScriptsFromFile "${1}" "${1}/additionalScripts.txt" "${mountPoint}/Packages" || errExit
fi
fi
# If it exists, install the partition data onto the install image
ProcessAutoPartition "${1}" || errExit
# If it exists, install minstallconfig.xml (AutoInstall data) onto the install image
ProcessMinInstall "${1}" || errExit
# update progress information
echo "${progressPrefix}_buildingBooter_"
# Copy kernel and boot loader
if [ "${scriptsDebugKey}" == "VERBOSE" -o "${scriptsDebugKey}" == "DEBUG" ]; then
echo "Preparing the kernel and boot loader for the boot image"
fi
# make sure this doesn't exist
if [ -e "${destPath}/i386" ]; then
/bin/rm -rf "${destPath}/i386"
fi
/bin/mkdir -p $debug_opt "${destPath}/i386/x86_64" || errExit
# copy these directly off the install media
/usr/bin/ditto $debug_opt "${installSource}/boot.efi" "${destPath}/i386/booter" || errExit
/usr/bin/chflags nohidden "${destPath}/i386/booter"
# Grab the relevant portion of the com.apple.Boot.plist
kernelFlags=`/usr/libexec/PlistBuddy -c "print :'Kernel Flags'" "${installSource}/Library/Preferences/SystemConfiguration/com.apple.Boot.plist"`
/usr/libexec/PlistBuddy -c "add :'Kernel Flags' string ${kernelFlags}" "${destPath}/i386/com.apple.Boot.plist" > /dev/null 2>&1
/usr/bin/ditto $debug_opt "${installSource}/System/Library/CoreServices/PlatformSupport.plist" "${destPath}/i386/PlatformSupport.plist" || errExit
# extract the kernel & kernelcache for the boot shell
/usr/bin/lipo -extract i386 "${mountPoint}/kernelcache" -output "${destPath}/i386/kernelcache" || errExit
/usr/bin/lipo -extract x86_64 "${mountPoint}/kernelcache" -output "${destPath}/i386/x86_64/kernelcache" || errExit
# Apply choice changes, if any
if [ -e "${1}/MacOSXInstaller.choiceChanges" ]; then
echo "Copy over package choice selection."
/usr/bin/ditto $debug_opt "${1}/MacOSXInstaller.choiceChanges" "${mountPoint}/Packages/Extras/MacOSXInstaller.choiceChanges"
fi
# update progress information
echo "${progressPrefix}_finishingUp_"
# perform the final cleanup
PostFlightDestination "${1}" "$destPath" || errExit
rrExit
# Apply choice changes, if any
if [ -e "${1}/MacOSXInstaller.choiceChanges" ]; then
echo "Copy over package choice selection."
/usr/bin/ditto $debug_opt "${1}/MacOSXInstaller.choiceChanges" "${mountPoint}/Packages/Extras/MacOSXInstaller.choiceChanges"
fi
# update progress information
echo "${progressPrefix}_finishingUp_"
# perform the final cleanup
PostFlightDestination "${1}" "$destPath" || errExit
tDestination "${1}" "$destPath" || errExit
errExit
Vol/private/tmp" ]; then
if [ "${scriptsDebugKey}" == "VERBOSE" -o "${scriptsDebugKey}" == "DEBUG" ]; then
echo "Cleaning out /private/tmp on $1"
fi
/bin/rm -r $opt "$srcVol/private/tmp/*"
fi
if [ -d "$srcVol/private/var/tmp" ]; then
if [ "${scriptsDebugKey}" == "VERBOSE" -o "${scriptsDebugKey}" == "DEBUG" ]; then
echo "Cleaning out /private/var/tmp on $1"
fi
/bin/rm -r $opt "$srcVol/private/var/tmp/*"
fi
if [ "${scriptsDebugKey}" == "VERBOSE" -o "${scriptsDebugKey}" == "DEBUG" ]; then
echo "Cleaning out devices and volumes on $1"
fi
if [ -d "$srcVol/Volumes" ]; then
/bin/rm -r $opt "$srcVol/Volumes/*"
fi
if [ -d "$srcVol/dev" ]; then
/bin/rm $opt "$srcVol/dev/*"
fi
if [ -d "$srcVol/private/var/run" ]; then
/bin/rm -r $opt "$srcVol/private/var/run/*"
fi
# Copy kernel and build the kext cache on the boot image
PrepareKernelAndKextCache()
local srcDir="$1"
local destDir="$2"
local opt=""
if [ "${scriptsDebugKey}" == "VERBOSE" -o "${scriptsDebugKey}" == "DEBUG" ]; then
Stopping image creation.
Terminating script!
Image creation failed. -
Hi,
I would like to use a system variable in a query in the where clause. How can i use it?
Thanks in advance:
BiancaHi,
840275 wrote:
Several scripts need to use the same value so i have created a system variable for it.
(some of these scripts are in oracle, some in Talend)
select...
from myTable
where myColumn = mySystemVariable:
Tha question is how can i reference a system variable from a query?
Depending on exactly what you mean, the code you posted will work; just fill in the columns you want in place of "...".
If I don't know where you're starting from, and I don't know where you want to go, then I can't give you very precise directions.
Explain what you're trying to do. Remember, the people who want to help you don't know what environment you're working in (e.g., SQL*Plus, PL/SQL, Apex, ...), they don't know anything about your application, and they don't exactly what you want. The more you help them, the more they can help you.
Why not post a question that really explains what you need to do? For example: "I have a table like scott.emp, that has multiple departments. Users will always be interested in only 1 departement at a time. I would like them to run standard, fixed queries, such as ... but have the results only apply to the department they are interested in, as if they had executed ... Several users may be on the system at the same time, and they won't necessarily be interested in the same department. I'm doing this in SQL*Plus now, but I may want to do something similar in Apex. My Orace version is ...". -
Why system prompting me twise for transport when I added a Z message?
Hi Experts,
I added a custom message to a custom message class in SE91, but, on saving, I noticed that systm is asking Transport request twise (anyways am always assigning/giving the same transport request), pls let me know that Why system is asking transport request twise? unlike any other change in any other custom request!
Thank youHello ...
double click on the transport request and see included objects in it ..then you will know.
regards
Prabuu -
How can system ensure to always make replenish qty to Max level?
Hello,
I have following query related to posting change in WM
MAX qty --- 100
Min qty--- 50
How should I make the stock to Max 100 always when available stock falls below 50? For ex- if available stock is 49 or 30, or 2 or anything below 50 then system should always replenish it to 100 from Replenishment bin
I believe when replenished qty in material master is 50 and stock is below 50 then system will replenish 50 qty. How can system ensure to always make replenish qty to Max level?
Thanks,
MMCHi,
Keep the replinish qty as zero in WM2 view of MMR.
Go to LP21 and see if the requetsed qty is now 100.
If you keep some qty as replinish qty, the same qty is always proposed as requested qty (TR qty)
regards
Shashidhar -
Why is my security always invalid? I haven't been able to download any apps!
Why is my security always invalid? I haven't been able to download any apps!
Contact iTunes store support: http://www.apple.com/emea/support/itunes/contact.html
-
Why can't I access the balance in my iTunes account? Why does the process always end up on the credit card page instead of accessing my balance?
Alice Vanderlund wrote:
Why can't I buy more international songs in the U.S. iTunes store??
Because the owners of the songs have not licensed them for sale in the U.S.
Apple doesn't have any say in the matter. it's up to the owner of the distribution rights for the music. -
ADDING SOURCE SYSTEM FIELD IN MY QUERY
HI ALL,
i WANT TO DEVELOP A CUSTOM REPORT WITH SOURCE SYSTEM FIELD IN MY QUERY WHICH THE FIELD IS NOT COMING FROM THE CUBE . PLEASE COULD SOMEONE HELP ME IN THIS REGARD.
MAX PTS GIVEN
REGARDS,
AXELHi Axel...
if yo want ot jump from a query to some R/3 report, pgm, transaction...you can use the report-report interface (RRI)...but if you want to add a field on the same screen of your query, you can go for a virtual char/KF: it's enough to add it in your cube, let it empty and fill it runtime with some ABAP lines with an RFC link to the table field you need...
pay attention to performance issues and to the consideration that this field will be empty if your RFC fails (foe unavailability of R/3 system, for example...)
Otherwise try to use a virtual cube !
Hope it helps!
Bye,
Roberto -
says apple mobile device failed to start. verify you have sufficient priveledges to start system services. its always updated before.
See section 5 of TS1538: iOS: Device not recognized in iTunes for Windows or alternatively this uninstall & reinstall iTunes post.
tt2 -
Why is the itunes always show my ID is disabled as I download the APP
Why is the itunes always show my ID is disabled as I download the APP
If it works on your computer's iTunes but not your phone then try logging out of your account on the phone by tapping on your id in Settings > Store (Settings > iTunes & App Stores on iOS 6) and then log back in and see if that 'refreshes' the account on it
If it doesn't work on your computer nor iPhone then depending on why it's been disabled you might be able to re-enable it via this page : http://appleid.apple.com, then 'reset your password'
Or you might need to contact Apple : http://www.apple.com/support/itunes/contact/ - click on Contact iTunes Store Support on the right-hand side of the page -
When entering an address, I am always queried to allow forwarding or not. Does that mean I have a key-logger attached to my searches? The message says Firefox prohibited redirection to another page, even when I open my home page. Please advise.
I would recommend posting in the iTunes forum: https://discussions.apple.com/community/itunes/itunes_for_mac
-
Display Current/System date in the Query
Hi,
Can any one tell me how i can display the current date or system date in Bex Query/report. I tried to use "0DAT" SAP exit as the key date in the "General Properties"... this helps me to execute query based on a Key date, but does not display the date. Can any one tell me, how I can use the current date in my query for some calculations and how I can display the current date.
ThanksHi Tanu
If you want to see the query run date along witn query properties in the report output ( after you execute the report).. then go to "Layout".. (please check for Icons) >display text elements> all. ( This is if you are in BW 3.5).. if you are in BI 7.0, then simplay click on information and you will see all the details
I see you are asking for some calcuation's also.. for that you should see what date fields you have in the backend cube/dsou2026
Hope this helps
Thanks
Kalyan -
Why system disk status shows blank in VM Manager
Quick question
Why system disk status is blank, shows none in VM Manager for VM guest. I mean it should say Active/Inactive.... where as other attched disks shows proper status.What version of Oracle VM Server?
What version of Oracle VM Manager?
What version of ovs-agent? -
Why System.out.println() is ok but System.out.print(); ?
why System.out.println() is ok but System.out.print();?
if i leave empty between parantheses in print .compiler gives error but println() doesnt?gimbal2 wrote:
Think about it for a moment. What would System.out.print() do without any parameters? What CAN it do?That's easy: print() COULD behave like println() without writing a newline at the end ;)
But I agree with Kayaman and Ram: javadoc is very nice, you simply have to read it.
Maybe you are looking for
-
Satellite T230 and Windows 8 compatibility
Hello, My Satellite T230 (PST4AE) is not listed on Windows 8 compatibility's page. Is it not compatible at all?
-
Hi all, I am using Weblogic 10.3.3. I have some confusion regarding authentication and web applications. I have two test web applications deployed on the same managed server (NO cluster). One web application's login-config is set for form based and t
-
I have a mac. I have been attaching photos by dragging and dropping. It seems to work but then all say "failed." And if it looks like a few are okay, they aren't able to be opened or people (including mac users) say "I can't open" or "nothing there."
-
Missing movies in project since iOS 8 and iCloud Photo Library
Hi, I've been to Europe this summer and created a movie in iMovie for iOS. That was when iOS 7.1.2 was the most current release. Today, I wanted to finish up my project. I'm currently running on iPad air, iOS 8.0.2, latest release of iMovie and iClou
-
Hi, When I try bmpx I get; ** (beep-media-player-2:15110): CRITICAL **: DBus Error: (org.freedesktop.DBus.Error.Spawn.ChildExited): Process /usr/libexec/beep-media-player-2-bin exited with status 127 dbus is running as a echo $DBUS_SESSION_BUS_ADDRES