Why the reason to use unseriallized update mode in inventory data source?

Hi,
clarify my doubt regarding using unserialized in inventory why not use queqe delta mode & direct delta mode .
regards
venkat

HI,
In the LIS information systems, updating of statistical data can take place in three ways:
As a synchronous update (U1)
(Immediate start, that is when an event takes place that triggers an update)
As an asynchronous update (U2)
(Delayed start, i.e., updating is slightly delayed after an event that triggers an update).
As collective update (V3)
(Start delayed that means the update is done at done at any point after the event that triggers the update ).
With Collective updates the update of the statistic data can take place anytime after the document update. The update of the statistics data can also be done outside of the dialog times.
You can specify the type of updating for each information structure in Customizing. You need to make the appropriate settings in Customizing for the Logistics Information System. You can find detailed information in the Implementation Guide for the Logistics Information System.
Regards,
Amol

Similar Messages

In BAPI's why the structures are used in table parameters?

Hello sir,
what is BAPI sir? In BAPI's why the structures are used in table parameters? table parameters they are using structures but not using any customized tables ?
regards
rachu.

Hello Rachu
BAPIs provide RFC-enabled interfaces to SAP business objects (e.g. like customer, sales order, purchase order, etc.).
A BAPI does basically the same like you would need to do calling the corresponding transaction (e.g. BAPI_SALESORDER_CREATE -> VA01).
Since they are RFC-enabled they can be called from external systems.
BAPIs represent an external interface for the outside world. Very often you will find within the BAPI that there is a mapping done to the (SAP-)internal structures at the beginning of the coding and vice versa at the end of the coding. Thus, you will (almost) never find any DB table name used as type of a BAPI TABLES parameter.
Regards
Uwe

How to capture the change in the update mode (for Inventory) in a transport

Hi all,
I recently changed the update mode for Inventory Controlling from Unserialized V3 Update to Queued delta in R/3 DEV environment. When I was doing the change it did not prompt for a transport request. Now I have to somehow capture this in a transport and move it to R/3 Quality environment. How do I capture this change in a transport.
Thanks in advance,
Ram Kumar.

there are 2 options
1) try changing back and forth and see if it prompts for a request
2) Create a customizing request and add the following entry into the request
Program ID - R3TR; Object type - TABU; Object name - TMCEXUPD
and make the entry ...How ?? Click on the key that you see under the column 'Function'
client/application component.. if client is 100 and application component is 11
then the table entry should be 10011
Assign points if it helps
P.S:if you check the table TMCEXUPD shows you the update mode
Edited by: KK on May 28, 2008 1:52 PM

How to set the router and play the Command & Conquer using direct IP mode?

My router is WRT54GFirmware Version: v3.03.1
How to set the router and play the Command & Conquer using direct IP mode with other computer?

Hi, when you say direct IP mode, what do you mean ? do you wanna play the game online or on the LAN ??
can you give a few more details.

Marker update for Inventory data sources

Hi all,
why we use marker update in Cube manage for inventory data sources at the time of loading?
i heard that to avoid the keyfigures cumulation we do check that option ,is that correct/
please clear my doubt
thx

HI
(2LIS_03_BF Goods Movement From Inventory Management-------Unckeck the no marker update tab)
(2LIS_03_BX Stock Initialization for Inventory Management--
---select the no marker update check box)
2LIS_03_UM Revaluations -
Unckeck the no marker update tab)
in the infopackege of "collaps"
Cheers

Crystal Report using a Web Service as a data source?

I am trying to figure out how to use a Web Service as a data source in Crystal Reports. When I use the report wizard, I do not see an option to select Web Service as a new connection. We are currently using Crystal Reports 2008 v12.1.0.892. Could it be that my version does not support this? Is there an update that contains this feature? Please help.

Thanks for your response. Unfortunately I do not see a radio button for Web Services. I've read that it should be there too. Could it be a missing plug-in or patch?
Here are screen shots of what I see when trying to connect to an XML. Any thoughts?
[http://s26.photobucket.com/albums/c120/hpolit/?action=view&current=wizard1.jpg]
[http://s26.photobucket.com/albums/c120/hpolit/?action=view&current=wizard2.jpg]

Using ConnBean and CursorBean with a Data Source

Hi all,
I',m making a web app. using the Jdev (RUP4) with OA Extension. I looked in the help menu under "About Data-Access JavaBeans and Tags". Here I found the following example, but for some stange reason I cannot get the setProperty to work.
Example: Using ConnBean and CursorBean with a Data Source This following is a sample JSP page that uses ConnBean with a data source to open a connection, then uses CursorBean to execute a query.
<%@ page import="java.sql.*, oracle.jsp.dbutil.*" %>
<jsp:useBean id="cbean" class="oracle.jsp.dbutil.ConnBean" scope="session">
<jsp:setProperty name="cbean" property="dataSource"
value="<%=request.getParameter("datasource")%>"/>
</jsp:useBean>
<% try {
cbean.connect();
String sql="SELECT ename, sal FROM scott.emp ORDER BY ename";
CursorBean cb = cbean.getCursorBean (CursorBean.PREP_STMT, sql);
out.println(cb.getResultAsHTMLTable());
cb.close();
cbean.close();
} catch (SQLException e) {
out.println("<P>" + "There was an error doing the query:");
out.println("<PRE>" + e + "</PRE>\n<P>"); }
%>
Does anyone know how to set the "Property" to a datasource and make it work?
Best regards,
MHCI

There is no point-and-click (Import Data Source Metadata) way to use an LDAP server as a datasource. You have to use the Java Function provided on dev2dev. If you need help with it, please post here.
- Mike

Can Informatica use Oracle 7.3 as a data source?

We have a client with a legacy system in Oracle 7.3.
They want to know if they can use Informatica 8.1.1 and access their legacy data using Informatica.
The Informatica documentation is silent on the versions of Oracle that are supported as a data source.
Thanks for any insight!
Gene

I think connecting with informatice is not the issue...
But the issue will be if you want to use BIA.
Because you don't have adapters for this source...
Or perhaps you can take an older version of BIA?
But is this system legacy because they have a new system, which they using with BIA and they want to report on this old eBS as well?

What are the steps need to be taken care for MM data sources while extrac

what are the steps need to be taken care for MM data sources while extracting from R/3 tables
and please provide the Steps involved in R/3 side
thnaks
Racha

Hi,
For Inventory Management, you can have a look at the following link.
[https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/f83be790-0201-0010-4fb0-98bd7c01e328]

Regarding calling the fuctional module Using 'in update task'

Hi ,
I want to call a Functional module Z-PS_VK11_FRC using the statement IN UPDATE TASK .
What is procedure to work with . can anybodt tell me how to proceed or give me some sample program .
Regards,
Shilpa Talluri

Function modules that run in update task can not return any values because your program has no longer control over the function module (the update task has).
UPDATE TASK fm mostly used to update database tables.
You don't any special coding other than calling fm UPDATE TASK
And in the attributes of function module you need to tick the Update mode and "Coll Run" so that it can be used to run individually in the V2 update process can be grouped together and run collectively.
a®

Any way to see the sql code used to update DataTableModel?

Hi,
I'm getting an sql syntax error when I do an update on a table model.
Is there a way to see the SQL command that Creator is using to update the database?
Thanks!
Rick

This is an easy one. In your code before you do the .execute put in the following line: String tempString = tableRowSet.getCommand(). Set a break point on the line after. Start the program in debug mode. When the program hits the break point look at the value of tempString. check your sql statment.

Is there a way to get the result of using multiple blending modes in one object?

Hello,
I wonder if there's a way to merge multiple objects with blending modes to one object. Here is the example:
On the left rhere are three objects with the same appearence but different blending modes(color dodge, normal, overlay), on the right they are overlapped, which are still three object. I'm looking for the way to have the same result as the right overlapped one, but as one object. Having the same multiple objects only for the result of color blending mode uses too much memory for my computer.
Thank you for your help in advance.

create one object: then in your appearance panel, duplicate the fill twice. Select the top fill and expand the sub menu, click on opacity, choose blending mode. repeat.
G

Why the iPhone 3G do no update up to 4.2.1

Why the iPhone 3G is stil to 4.2.1 and not update to other iOS?

4.2.1 is the iOS Firmware Apple decided to stop at. No further support from Apple is expected for iPhone 3G.

BW Entire scnerio where can i use all update modes?

Hi ,
Can any 1 give me an example or scenario where i can entire update modes of the IP. i mean full update ..
delta ..
initi without DT.
init with DT.
early delta .
Iam lilltle confused now .
Regards ,
Pavan
My id is [email protected]

Hi,
Full Update-To load Historical Data.
Init-This is done to enable the Delta Upload.
Delta will be done only if the Init has happened
Initilialize with out data transfer:
this means Delta gets initialized ie datasource will get in to RSA7 for delta updation, but in this updation data wont get transferred.
initilialize with data transfer.
Once the data source getin we can transfer data from source sysem to BW through this connection. here data can transfered based on our input condition.
early delta initlization
With early delta initialization, the data is written into the delta queue /tables for the application during the initialization request, in the source system.
This way you can initialise the delta process without having to stop the posting of new data in the source system, as opposed to simple initialising the delta process (wihtout Early Init)
Early delta initialization is only available if the DataSource extractor in the source system supports this process.
Initiliazw with out data transfer--> we go for when we run full load first time and second time we need delta so for delta enable we have to run init so we go for initilize with out data transfer so with this step delta is enable.but when we run intiliaze with out data transfer data is not transfer it is run for delta enable purpose only
Check this link,
http://help.sap.com/saphelp_nw2004s/helpdata/en/80/1a65dce07211d2acb80000e829fbfe/frameset.htm
Hareesh

Using InfoPath and the Web service GetUserProfileByName-An error occurred accessing a data source

Hi, Everyone,
I want to realize the function that when user fills out the infopath form the form can automatically get current users' name and I've searched that I can use the Web service GetUserProfileByName method. When I preview the form it is all right, however, when
I fill the form online, it occurs this error as folllowing. Anyone knows why and how to solve this problem?
Thanks forward!
Warning
An error occurred querying a data source.
Click OK to resume filling out the form. You may want to check your form data for errors.
Hide error details
An error occurred while trying to connect to a Web service.
An entry has been added to the Windows event log of the server.
Log ID:5566
Correlation ID:9c23d39c-18fa-1025-c7ec-600a1582a54a

Hi,
According to your post, my understanding is that you get error when using the Web service GetUserProfileByName in InfoPath.
Have the InfoPath form template call web service in code? If yes, please see following KB and check if it is the cause.
http://support.microsoft.com/kb/981684
You can also
follow the steps in the article to resolve this error in InfoPath. Please refer to:
Auto Populate User Information in InfoPath with Claims Based Authentication in SharePoint – Part 2 of 3
In addition, you need to disable the Loopback check.
Here is a similar thread for your reference:
https://social.technet.microsoft.com/Forums/en-US/d6d20308-a5d0-45fa-881d-0626c68c4e73/infopath-an-entry-has-been-added-to-the-windows-event-log-of-the-server-logid-5566?forum=sharepointcustomizationprevious
Best Regards,
Linda Li
Linda Li
TechNet Community Support

Why the reason to use unseriallized update mode in inventory data source?

Similar Messages

Maybe you are looking for