Why the scatter graph doesnt show data?

Hi,
I would like to ask something..i use the latest version of bean with size 1.74 MB and i download it from the oracle site but SCATTER GRAPH didn't work with it.. it doesn't show anything from the data that have been sent to it..
I saw in the sample code that comes with the bean (graph90 file) that the scatter type is new supported one..so does this version of bean support the scatter graph in oracle 10g forms? if yes what do you think that the problem might be ?
Does anyone know what the problem might be and how i can fix it?
Thanks alot
Eyad Basheer

Grant SELECT or DEBUG on scott.emp to trainee3, or else give trainee3 some global SELECT ANY privilege.

Similar Messages

  • Can you look at my code and give me any idea why the pie garph doesnt show?

    Hi..
    i use beans to create an pie graph and i dont know how i can add data to it,i mean what data must be pass to it.. as u know in column and line graph there is an x-axis and y-axis and in pie there no x or y axis..i need 2 categories and one value to put on it.
    and the code is :
    CURSOR C_DETAIL IS
    SELECT REF_TYPE ,
    REF_YEAR ,
    REF_NUM ,
    ACT_DATE ,
    UNREL_PROF_LOSS , ----------------->(value)
    TO_CHAR(ACT_DATE , 'DD/ MM/ YYYY') ,----------->(Category1)
    LPAD(TO_CHAR(REF_TYPE),2,'0')||'/'||
    LPAD(TO_CHAR(REF_YEAR),2,'0')||'/'||
    LPAD(TO_CHAR(REF_NUM),6,'0') "DEAL_NUM"--------->(Category2)
    FROM BOND_ACT
    WHERE ISSUE_NUM = :KEY.ISSUE_NUM AND
    ISSUE_NUM_ABB = :KEY.ISSUE_NUM_ABB AND
    ISSUER_ID = TO_NUMBER(:KEY.ISSUER_ID ) AND
    ACT_DATE >= TO_DATE(:KEY.FROM_DATE,'J') AND
    ACT_DATE <= TO_DATE(:KEY.TO_DATE,'J') AND
    ACT_TYPE = 6
    ORDER BY REF_TYPE , REF_YEAR , REF_NUM , ACT_DATE;
    BEGIN
    set_custom_property('CHART_DISP.SIMPLEGRAPH',1,'CLEAR_GRAPH','');
    SET_CUSTOM_PROPERTY('CHART_DISP.SIMPLEGRAPH',1,'DEBUG','TRUE');
    VD := ',';
    COUNTER := 0;
    OPEN C_DETAIL;
    FETCH C_DETAIL INTO var1,var2,var3,var4,value,Category1,Category2;
    while (C_DETAIL%FOUND) LOOP
    CDATA := X||VD||'PIE GRAPH'||VD||X;                    
    set_custom_property ('CHART_DISP.SIMPLEGRAPH',1,'ADD_ROWDATA',CDATA);
    COUNTER := COUNTER +1;
    FETCH C_DETAIL INTO var1,var2,var3,var4,value,Category1,Category2;
                   END LOOP;
                             SET_CUSTOM_PROPERTY('CHART_DISP.SIMPLEGRAPH',1,'GRAPHTYPE','PIE_GRAPH');
                             SET_CUSTOM_PROPERTY('CHART_DISP.SIMPLEGRAPH',1,'COLUMNCOUNT','');
    set_custom_property('CHART_DISP.SIMPLEGRAPH',1,'ADD_DATA_TO_GRAPH','');
    CLOSE C_DETAIL;
    set_custom_property('CHART_DISP.SIMPLEGRAPH',1,'SHOW_GRAPH','');
    EXCEPTION
         WHEN OTHERS THEN
         MESSAGE('SQLCODE='||SQLCODE||SQLERRM);
         MESSAGE('SQLCODE='||SQLCODE||SQLERRM);
    end;

    Hi,
    please see the html help file (graph90.html) that comes with the Graph bean sample. The debug option is enabled with a call to set_custom_poperty('blockname.beanarea',1,'DEBUG', true)
    The messages are written to teh JInitiator console (see right bottom corner of windows to open)
    Frank

  • Why doesn't the scatter graph display properly??

    Hi,
    I've already posted a thread regarding scatter graph
    but nobody (not even from Macromedia!) has been able to give me
    an answer and I've been trying on my own since then, but to no
    avail!
    I refer to WhazzInAName said on Dec 31, 2004 at 9:51 AM on
    Cfchart
    Livedocs
    I copied only the scatter graph part, pasted it in a CFM page
    and run it. It displayed fine.
    However, if I try to add more than 1 value for a particular
    chartdata item, e..g.
    <cfchartdata item="25" value="99.357">
    <cfchartdata item="25" value="90">
    <cfchartdata item="25" value="65">
    The graph only displays the value 65, but not the other 2!
    I tried plotting the same values in an Excel chart and there
    was no problem at all. All points displayed correctly!!!
    What's wrong with this cfchart?? Why isn't it displaying the
    other 2 values???
    Also, there is no possibility with the chart in Report
    Builder to specify sortxaxis="yes" xaxistype="scale"
    yaxistype="scale", or is it available somewhere?
    Thanks and regards,
    Yogesh Mahadnac

    Hi Ted,
    Thanks for replying.
    Too bad CF Report Builder can't handle such issues.
    Hope it's going to be
    MUCH BETTER with CF8?
    Thanks and regards,
    Yogesh Mahadnac

  • Convert a scatter graph with multiple data series into individual graphs

    I am trying to convert a scatter graph with multiple data series into individual graphs, with the series having the same formatting as in the graph when all series are together.
    Normally, if I delete any series, the color scheme for all the other series vanishes. I can then waste more time in having to re-adjust the  color and shape of the series, but this is tedious. This, I do not want. Is there an automated way to do this?
    Ideally, of course, all series would appear in little subsections in the space of the former one graph, all with individual axes, but I can't have all, so I'll settle with having several individual new graphs, each with just one series, and with the original
    formatting.
    Thx.

    How about creating a copy of the chart, and then setting all series except one to be transparent (no line, no marker)? Repeat for each series.
    Regards, Hans Vogelaar (http://www.eileenslounge.com)

  • When i open a link in a new window the web address doesnt show.

    when i open a link in a new window the web address doesnt show. What have i done wrong? it used to work, and it works if i open link in a new tab, trouble is i hate using tabs prefer a new window every time.. help!!

    Start Firefox in <u>[[Safe Mode]]</u> to check if one of the extensions or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > Appearance/Themes).
    *Don't make any changes on the Safe mode start window.
    *https://support.mozilla.org/kb/Safe+Mode
    *https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes

  • Why the iPhone dose not show the witting in case if the other person have a call and I'm on witting?

    Why the iPhone dose not show the witting in case if the other person have a call and I'm on witting? really I'm dissappointed with this point Why we do not have this service?

    That is not a feature of the iPhone (or of any phone I've ever had so apparently it's far from universal). Apple has not said why they have no such feature.
    You can request such a feature here:
    http://www.apple.com/feedback
    Either the person you're calling will answer you or they won't. What difference does it make why?

  • Do anyone know why the desktops do not show? Is this a bug?

    Do anyone know why the desktops do not show?

    See:
    * http://kb.mozillazine.org/Images_or_animations_do_not_load
    Start Firefox in [[Safe Mode]] to check if one of the add-ons is causing the problem (switch to the DEFAULT theme: Tools > Add-ons > Themes).
    * Don't make any changes on the Safe mode start window.
    See:
    * [[Troubleshooting extensions and themes]]

  • Can U look at my code and give me any idea why the scatter garph didnt work

    Hi,
    i use this code to create a scatter graph using bean in oracle 10g forms and it didnt show the points.. it only show an empty graph although the cursor return data..Please if anyone know whats the problem i would be so thankful.
    And here is the code:
    DECLARE
    cursor c is
    SELECT
    FRA_YEAR, -----> X
    TOTAL_AMT_IN_BASE -----------> Y
    FROM TMP_GRPH
    ORDER BY FRA_YEAR;
    cdata varchar2(2000);
    vd varchar2(2);
    X NUMBER;
    Y NUMBER;
    COUNTER NUMBER;
    cdata varchar2(2000);
    vd varchar2(2);
    X NUMBER;
    Y NUMBER;
    COUNTER NUMBER;
    BEGIN
    set_custom_property('CHART.SIMPLEGRAPH',1,'CLEAR_GRAPH','');
    SET_CUSTOM_PROPERTY('CHART.SIMPLEGRAPH',1,'DEBUG','TRUE');
    VD := ',';
    COUNTER := 0;
    OPEN C;
    FETCH C INTO X,Y;
    while (C%FOUND) LOOP
    CDATA := X||VD||X||VD||Y||VD||Y;
    set_custom_property('CHART.SIMPLEGRAPH',1,'ADD_ROWDATA',CDATA);
    FETCH C INTO X,Y;
    END LOOP;
    set_custom_property('CHART.SIMPLEGRAPH',1,'GRAPHTYPE','SCATTER_GRAPH');
    set_custom_property('CHART.SIMPLEGRAPH',1,'ADD_DATA_TO_GRAPH','');
    CLOSE C;
    set_custom_property('CHART.SIMPLEGRAPH',1,'SHOW_GRAPH','');
    EXCEPTION
    WHEN OTHERS THEN
    MESSAGE('SQLCODE='||SQLCODE||SQLERRM);
    MESSAGE('SQLCODE='||SQLCODE||SQLERRM);
    end;
    note:
    FRA_YEAR is the X-axis
    TOTAL_AMT_IN_BASE is the Y-axis
    Thanks alot
    Eyad Basheer

    Hi,
    please see the html help file (graph90.html) that comes with the Graph bean sample. The debug option is enabled with a call to set_custom_poperty('blockname.beanarea',1,'DEBUG', true)
    The messages are written to teh JInitiator console (see right bottom corner of windows to open)
    Frank

  • Why the Image is not showing on Report at runtime?

    Post Author: azharrahi
    CA Forum: .NET
    I am working on a web site which was developed in ASP.Net 1.1. This web site also contains Crystal Reports version 9.
    Now I have loaded the web site in Visual Studio.net 2005 and hence in ASP.Net 2.0. Still the Crystal reports version is 9.
    Everything is ok and Crystal reports are showing data properly.
    But one thing is very strange and annoyable.i.e. When I insert image on Crystal Reports through right click-> Insert->Picture, the image is shown in the design time preview of report, but when I load the Crystal Report on .Net control CrystalReportViewer and run the application, the Image is not displayed. The problem becomes more strange when I Export the Crystal Report to PDF file and MS Excel. Strangely the Image is also exported there and is displayed. Whats the problem? Why Image is not displayed on the CrystalreportViewer of the form on run time and why on exporting to PDF file and MS Excel, it is displayed? Can any body tell me whats the problem behind of not displaying image on runtime?
    At least it means that Image is embeded and loaded on runtime. Only now viewing. Only a blank Picture box displayed.

    Post Author: Argan
    CA Forum: .NET
    A couple things can cause this.
    Right click on the red x to find out the name of the png file.  Search the web server for that png and make sure that the asp worker has access to it.
    The other is a image handler issue.  Search the kbase for Red X NET 2005 and you will find a kbase or two that addresses this.

  • Why the 3D graph control shortcut menu is disabled?And how to set 3D graph to default view when running?

    1).Controls have shortcut  menu,but the 3d graph's shortcut menu cannt be able. why? how to make it able?
    2).3D graph can be rotated free by dragging, and when it is not running,right click ,select default view, the graph go back to initial view. But when the VI run, the shortmenu is disabled, how to make it to defaul tview. the property node and method seem have none about default view

    The 3D Graph control is actually an ActiveX control (in Windows), so it's not a "standard" LabVIEW control with the "standard" run-time popup menu. Consequently, to access most of the properties and actions you actually have to use the Property Node and Invoke Node functions in the Application Control palette:
    Message Edited by smercurio_fc on 05-30-2008 09:55 AM
    Attachments:
    Example_VI_BD6.png ‏1 KB

  • HT5569 what do you do if you put in the correct password but the sign still doesnt show

    what do i do if when i put in the correct wifi password but it still doesnt show the wifi sign?

    Does the iOS device connect to other networks?
    Do other devices now connect?
    Did the iOS device connect before?
    Try the following to rule out a software problem:                 
    - Reset the iOS device. Nothing will be lost
    Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Power off and then back on your router
    .- Reset network settings: Settings>General>Reset>Reset Network Settings
    - iOS: Troubleshooting Wi-Fi networks and connections
    - Wi-Fi: Unable to connect to an 802.11n Wi-Fi network
    - iOS: Recommended settings for Wi-Fi routers and access points
    - Restore from backup. See:
    iOS: How to back up
    - Restore to factory settings/new iOS device.
    If still problem make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
    Apple Retail Store - Genius Bar

  • I am trying to restore  info from a 3g to a 3gs when I plug in the 3gs it shows that i have it backed up but when i plug in the 3g it doesnt show my name on there at all

    I need help restoring from my computer

    My 3gs randomly shuts off so I went to apple they said it was battery.  I replaced battery and it would not boot back up. So put old battery back.  So now I am trying to use my old phone 3g.  When I plug in 3gs and back up it shows that I did. So I eject and plug in 3g phone , when I click restore from backup it doesnt show my other phone 3gs and my name at all.???  can you help

  • Why the Itune is not showing my iphone in it???

    I m using Iphone 5s and i want to copy songs and some other stuff from my pc to my iphone. I searched for it on google and read some discussion on the official site of APPLE, acc. to them i need Itune to do so. I downloaded it from the apple site but when i connect my Iphone to my pc then The Itune  does not show my IPhone anywhere... plz help

    Hey nrathi,
    Thanks for using Apple Support Communities.
    Follow this article since the iPhone does not appear under Devices in iTunes.
    iOS: Device not recognized in iTunes for Windows
    http://support.apple.com/kb/ts1538
    Have a nice day,
    Mario

  • What do i do if the share tab doesnt show up in the side menu

    I am on a windows 7 computer and have turned home sharing on but the shared menu doesnt appear in the side bar

    Start here:
    iPhone, iPad, iPod touch: Device not recognized in iTunes for Mac OS X
    or
    iPhone, iPad, or iPod touch: Device not recognized in iTunes for Windows

  • Itouch 4g 32GB shows up in itunes, but when i click on it, nothing opens. The summary screen doesnt show up? HELP PLEASE :D

    When i i try to click on my ipod in itunes, nothing happens. and the sync icon is spinning next to it. but when i click on it, the summary screen doesnt pop up, ever? help

    Make sure "Put hard disks to sleep..." is NOT checked in Energy Saver system preference.

Maybe you are looking for