Why the SCCM client always corrupts the WMI repository?

Hi All,
I have a Configuration Manager 2012 R2 CU2 installation with hundred of client/servers.
From the initial deploy of the SCCM client, we seen that many machines had a Windows slow logon process.
We searched online for a fix and many people had this problem, suggesting to enable a registry key called
HKLM\Software\Microsoft\CCM\Ccmeval\NotifyOnly.
From that date, we fixed the slow logon process problem, but still have problems with operating system's updates installed with SCCM.
In the most cases, when SCCM install updates, it corrupt the WMI database and at the OS reboot, the updates are rolled back.
On the same machines, if we install updates from Windows Updates, we have no problems.
Also, with SCCM installation, we see a lot of "DCOM" or "PerfLib" errors.
Usually, the remote management of a client with SCCM doesn't works because the WMI repository is corrupted, so each time we need to do uninstall the SCCM client and do this:
1. Disable and stop the WMI service.
     sc config winmgmt start= disabled
     net stop winmgmt
2. Run the following commands.
     Winmgmt /salvagerepository %windir%\System32\wbem      (I noticed that you have run this command, but I would suggest that you try it again)
     Winmgmt /resetrepository %windir%\System32\wbem
4. Re-enable the WMI service and then reboot the server to see how it goes.
     sc config winmgmt start= auto
This is very frustrating.
Why the SCCM client create all these problems and how to fix this?
Thanks for your support.

I think that my case is not isolate.
There are a lot of posts like this:
http://www.windows-noob.com/forums/index.php?/topic/8989-wmi-corruption-sccm-2012-win7-sp1/
http://trevorsullivan.net/2012/11/21/configmgr-2012-ccmeval-exe-causing-client-corruption/
The strange thing is that the WMI corruptions only happens on machine where the SCCM client is installed, even if the machines is without any additional software (fresh windows installation).
In the same time, I need to fix a ProfSvc bug (KB2617858) because the PC become unusable.
Also, why it starts a WMI rebuild if I deploy the client with the "NotifyOnly" option (the registry key is fine)?
So, basically, on a fresh windows machine, as it joins to the domain:
1) the SCCM client install itselfs
2) it starts to install several windows updates
3) at the first restart, it try to rebuild the WMI and the ProfSvc bug appears
May be that the problem is not the SCCM client itself, but a windows update deployed via SCCM client?

Similar Messages

Is WMI required SCCM client 2007 agent for working

A Quick Qustion
Is WMI required SCCM client agent for working
what is the neccesity for WMI on SCCM client agent 2007
How SCCM CLient affect if WMI corrupt
could any one explaine
Its not only a question I am facing sccm client agent corrupted
shinu

Yes, functional WMI is a requirement for the SCCM client to work. One sign of WMI being corrupt is that the client won't receive any policies from the MP.
Blog: www.danielclasson.com/blog |
LinkedIn:
Daniel Classon | Twitter: @danielclasson

WMI issues in VMware based Machine Windows 2008 R2 Servers affecting SCCM Clients

Dear
Brothers,<o:p></o:p>
I came to
an observation particularly in dealing with Windows 2008R2 Servers Vmware Based
Virtual Machines with SCCM Clients.<o:p></o:p>
Observation:<o:p></o:p>
1. Windows
2008R2 Virtual Machine with Vmware Tools installed (Also depending in the
entries of WMI, I supposed). <o:p></o:p>
When the SCCM Server Pushes the client on this Servers, I found out that the SCCM Client
seems to be installed perfectly but when I tried to perform a remote WMI Query
and the response is displayed below (The RPC Server is unavailable).<o:p></o:p>
Now, I know that this kind of issues is something to do about DCOM Configuration
for Remote Access right?
Well, sad to say the settings has been checked, trippled checked actually to make sure it is correct with the correct permissions required and proven correct up to the last settings.
I even compare the settings to those in some Windows Servers with Working WMI Remote Access.
=========
What I have observed is that when we make a VMware Systems and install the
VMware Tools (see picture below) first before installing the
SCCM Client and the issue regarding WMI Remote access issues happens (The RPC Server is unavailable).
I proved it by creating a new VM Machine, then conduct installation in this order
SCCM Client first and then the
VMware Tools by this way so far the WMI Remote access works perfectly.
Now the Question:
Since we have atleast 70 VM Servers in production with this issue, and I proven that the VMware Tools is something to do with this issue, somehow now I need to resolved this in a logical manner.
For some of us who can guide me to resolved the issue without uninstalling the VMware Tools and fixing the WMI settings and let the SCCM Client work.
Regards,

We also have this issue. Nearly all of our terminal servers. I have to run a script to fix the issue and then reboot. It works, but only for a few days and then it starts all over again...
::to fix "not found" wmi error
::to fix .net calls to wmi repository
::to fix "initialization failure" error
net stop winmgmt
c:
cd c:\windows\system32\wbem
rd /S /Q repository
regsvr32 /s %systemroot%\system32\scecli.dll
regsvr32 /s %systemroot%\system32\userenv.dll
mofcomp cimwin32.mof
mofcomp cimwin32.mfl
mofcomp rsop.mof
mofcomp rsop.mfl
for /f %%s in ('dir /b /s *.dll') do regsvr32 /s %%s
for /f %%s in ('dir /b *.mof') do mofcomp %%s
for /f %%s in ('dir /b *.mfl') do mofcomp %%s
mofcomp exwmi.mof
mofcomp -n:root\cimv2\applications\exchange wbemcons.mof
mofcomp -n:root\cimv2\applications\exchange smtpcons.mof
mofcomp exmgmt.mof
For the Update on this case Microsoft didn't find out direct connection of WMI issue to any contributors, however the clients
from Microsoft and and 3rd party application such as VMware is highly dependent on WMI for its total function.
Things that we have learned:
1. Your script is the primary solution as recommended as well by Microsoft, but this is to restore the WMI to its healthy State.
Is the error gone?
no definitely not.
Note: The WMIDiagnostic tool does not help to isolate at all, not even Microsoft is validating the credibility of its generated Logs from this tool.
2. You need to apply the Hotfixes recommended by Microsoft to eliminate the WMI repository to increase its capacity which contributes to the Service to stall. Deliver the Patches via SCCM or any means of your patch deployment.
3. Don't forget to reboot the Affected Server every Hotfix installation, this seems fix the issue. For 3 months now the usual system who got the WMI issue most of the time is no longer encountering the WMI errors. So far this is the solution, what causes
the issue? according to Microsoft the cause is the absence of the patches.

The MOF Compiler could not connect with the WMI server

I am trying to add node2 to SQL cluster (2008) However, I kept running into errors with the following error message:
"The MOF Compiler could not connect with the WMI Server. This is either because of a semantic error such as an incompatibility with the existing WMI repository or an actual error such as the failure of the WMI Server to start".
I checked on the WMI services, they are started and running.renamed the WMI repository. but nothing worked .
Any idea what settings I need to change in order to ensure a successful instalation and add node 2 to sql cluster.

Hi,
Did SQL Server failed during installation and you somehow brought services online. Or it failed and next time you executed it succeeded IMO this error pops up because of remnants of failed installation on Node 1. With cluster specially if Installation on
node 1 fails you should uninstall completely and remove all files related to SQL Server and then proceed.
Have a look at below connect,see workaround and information posted by MS
https://connect.microsoft.com/SQLServer/feedback/details/356258/the-mof-compiler-could-not-connect-with-the-wmi-server
If above still not helps please post complete setup log file
%Program files%\Microsoft sql server\100\Setup bootstrap\Log\ folder.
Please mark this reply as answer if it solved your issue or vote as helpful if it helped so that other forum members can benefit from it.
My TechNet Wiki Articles

SCCM Client on Windows 7 CcmSetObjectSecurityInit

Hi,
I have search through the forum and Google extensively but I am not able to get any useful solution, I have around 100 machines in my environment and out of those only one of the windows 7 machine is having issues installing sccm client, I have tried installing
manually but the same error appears. Any help would be highly appreciated.
MSI (s) (C8!DC) [10:48:46:241]: Closing MSIHANDLE (4977) of type 790531 for thread 7132
MSI (s) (C8!DC) [10:48:46:241]: Closing MSIHANDLE (4972) of type 790540 for thread 7132
MSI (s) (C8!DC) [10:48:46:241]: Creating MSIHANDLE (4978) of type 790531 for thread 7132
MSI (s) (C8!DC) [10:48:46:242]: Creating MSIHANDLE (4979) of type 790531 for thread 7132
Action start 10:48:46: CcmSetObjectSecurityInit.
MSI (s) (C8!DC) [10:48:46:242]: Closing MSIHANDLE (4979) of type 790531 for thread 7132
[10:48:46] @@ERR:25001
Error 25001. Setup failed due to unexpected circumstances
The error code is 80004005
MSI (s) (C8!DC) [10:48:46:243]: Product: Configuration Manager Client -- Error 25001. Setup failed due to unexpected circumstances
The error code is 80004005
MSI (s) (C8!DC) [10:48:46:244]: Closing MSIHANDLE (4971) of type 790531 for thread 7132
MSI (s) (C8!DC) [10:48:46:244]: Closing MSIHANDLE (4970) of type 790540 for thread 7132
MSI (s) (C8!DC) [10:48:46:244]: Closing MSIHANDLE (4978) of type 790531 for thread 7132
MSI (s) (C8!DC) [10:48:46:244]: Closing MSIHANDLE (4969) of type 790541 for thread 7132
MSI (s) (C8:20) [10:48:46:245]: Closing MSIHANDLE (4968) of type 790542 for thread 6432
CustomAction CcmSetObjectSecurityInit returned actual error code 1603 (note this may not be 100% accurate if translation happened inside sandbox)
MSI (s) (C8:20) [10:48:46:247]: Machine policy value 'DisableRollback' is 0
MSI (s) (C8:20) [10:48:46:247]: Note: 1: 1402 2: HKEY_LOCAL_MACHINE\Software\Microsoft\Windows\CurrentVersion\Installer\Rollback\Scripts 3: 2
Action ended 10:48:46: CcmSetObjectSecurityInit. Return value 3.
MSI (s) (C8:20) [10:48:46:247]: Note: 1: 1402 2: HKEY_LOCAL_MACHINE\Software\Microsoft\Windows\CurrentVersion\Installer\Rollback\Scripts 3: 2
MSI (s) (C8:20) [10:48:46:247]: No System Restore sequence number for this installation.
MSI (s) (C8:20) [10:48:46:247]: Unlocking Server
Action ended 10:48:46: INSTALL. Return value 3.
Property(S): UpgradeCode = {252DA259-82CA-4177-B8D0-49C78937BA3E}
Property(S): SourceDir = C:\Windows\ccmsetup\{4CD82FBB-0AFC-4864-A089-15364DF5F14B}\
Property(S): TARGETDIR = C:\Windows\SysWOW64\CCM\
Property(S): ALLUSERS = 1
Property(S): ErrorDialog = ErrorDialog
Property(S): ProductName = Configuration Manager Client
Property(S): ProductCode = {2609EDF1-34C4-4B03-B634-55F3B3BC4931}
Property(S): PackageCode = {4CD82FBB-0AFC-4864-A089-15364DF5F14B}
Property(S): Manufacturer = Microsoft Corporation
Property(S): ProductVersion = 4.00.6487.2000
Property(S): ProductLanguage = 1033
Property(S): SystemFolder = C:\Windows\SysWOW64\
Property(S): Redist.51D569E3_8A28_11D2_B962_006097C4DE24 = C:\Windows\SysWOW64\

You may refer the following article to rebuild WMI.
Rebuilding and reinstalling the WMI Repository
http://www.madanmohan.com/2010/10/rebuilding-wmi-repository.html
If it does not work, temporary disable the antivirus and firewall on that client and try again.
Important Note: Microsoft provides third-party contact information to help you find technical support. This contact information may change without notice. Microsoft does not guarantee the accuracy of this third-party contact information.
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread. ”

DFS replication stopped working and cannot be debugged because WMI repository cannot be accessed

Hello,
two days ago our DFS replication suddendly stopped working sometime around midnight local time. At least this is what our second domain controller is reporting. Event log is flooded with event id 5002 from DFSR. It is unclear what caused this sudden problem
and even worse, how to solve it. First thing I tried was to perform propagation tests. According to propagation report none of them was successful. Creating an integrity report brought me to another problem: It fails with two errors. First it is unable to
connect to the other DC. Second it is unable to access local WMI repository. This is true for both machines.
First I tried to find information on possible problems with WMI. WMIdiag provided a lot of information. However, opinions I found on the net largely disagree whether output from WMIdiag is useful or not. Yet I tried to re-compile .mof files and rebuild the
repository. So far, nothing changed. This is my output from WMIdiag:
34309 13:02:46 (0) ** WMIDiag v2.1 started on Donnerstag, 22. Mai 2014 at 12:49.
34310 13:02:46 (0) **
34311 13:02:46 (0) ** Copyright (c) Microsoft Corporation. All rights reserved - July 2007.
34312 13:02:46 (0) **
34313 13:02:46 (0) ** This script is not supported under any Microsoft standard support program or service.
34314 13:02:46 (0) ** The script is provided AS IS without warranty of any kind. Microsoft further disclaims all
34315 13:02:46 (0) ** implied warranties including, without limitation, any implied warranties of merchantability
34316 13:02:46 (0) ** or of fitness for a particular purpose. The entire risk arising out of the use or performance
34317 13:02:46 (0) ** of the scripts and documentation remains with you. In no event shall Microsoft, its authors,
34318 13:02:46 (0) ** or anyone else involved in the creation, production, or delivery of the script be liable for
34319 13:02:46 (0) ** any damages whatsoever (including, without limitation, damages for loss of business profits,
34320 13:02:46 (0) ** business interruption, loss of business information, or other pecuniary loss) arising out of
34321 13:02:46 (0) ** the use of or inability to use the script or documentation, even if Microsoft has been advised
34322 13:02:46 (0) ** of the possibility of such damages.
34323 13:02:46 (0) **
34324 13:02:46 (0) **
34325 13:02:46 (0) ** ----------------------------------------------------------------------------------------------------------------------------------
34326 13:02:46 (0) ** ----------------------------------------------------- WMI REPORT: BEGIN ----------------------------------------------------------
34327 13:02:46 (0) ** ----------------------------------------------------------------------------------------------------------------------------------
34328 13:02:46 (0) **
34329 13:02:46 (0) ** ----------------------------------------------------------------------------------------------------------------------------------
34330 13:02:46 (0) ** Windows Server 2008 R2 - Service pack 1 - 64-bit (7601) - User 'COM\ABCDEF' on computer 'DC2'.
34331 13:02:46 (0) ** ----------------------------------------------------------------------------------------------------------------------------------
34332 13:02:46 (0) ** INFO: Environment: .................................................................................................. 1 ITEM(S)!
34333 13:02:46 (0) ** INFO: => 1 possible incorrect shutdown(s) detected on:
34334 13:02:46 (0) ** - Shutdown on 01 April 2014 10:20:54 (GMT-0).
34335 13:02:46 (0) **
34336 13:02:46 (0) ** System drive: ....................................................................................................... C: (Datenträgernr. 0 Partitionsnr. 1).
34337 13:02:46 (0) ** Drive type: ......................................................................................................... SCSI (Adaptec Array SCSI Disk Device).
34338 13:02:46 (0) ** There are no missing WMI system files: .............................................................................. OK.
34339 13:02:46 (0) ** There are no missing WMI repository files: .......................................................................... OK.
34340 13:02:46 (0) ** WMI repository state: ............................................................................................... CONSISTENT.
34341 13:02:46 (0) ** AFTER running WMIDiag:
34342 13:02:46 (0) ** The WMI repository has a size of: ................................................................................... 26 MB.
34343 13:02:46 (0) ** - Disk free space on 'C:': .......................................................................................... 10665 MB.
34344 13:02:46 (0) ** - INDEX.BTR, 4276224 bytes, 22.05.2014 12:52:30
34345 13:02:46 (0) ** - MAPPING1.MAP, 67248 bytes, 22.05.2014 12:52:30
34346 13:02:46 (0) ** - MAPPING2.MAP, 67168 bytes, 22.05.2014 12:48:33
34347 13:02:46 (0) ** - OBJECTS.DATA, 23126016 bytes, 22.05.2014 12:52:30
34348 13:02:46 (0) ** ----------------------------------------------------------------------------------------------------------------------------------
34349 13:02:46 (0) ** INFO: Windows Firewall status: ...................................................................................... ENABLED.
34350 13:02:46 (0) ** Windows Firewall Profile: ........................................................................................... DOMAIN.
34351 13:02:46 (0) ** Inbound connections that do not match a rule BLOCKED: ............................................................... ENABLED.
34352 13:02:46 (0) ** => This will prevent any WMI remote connectivity to this computer except
34353 13:02:46 (0) ** if the following three inbound rules are ENABLED and non-BLOCKING:
34354 13:02:46 (0) ** - 'Windows Management Instrumentation (DCOM-In)'
34355 13:02:46 (0) ** - 'Windows Management Instrumentation (WMI-In)'
34356 13:02:46 (0) ** - 'Windows Management Instrumentation (ASync-In)'
34357 13:02:46 (0) ** Verify the reported status for each of these three inbound rules below.
34358 13:02:46 (0) **
34359 13:02:46 (0) ** Windows Firewall 'Windows Management Instrumentation (WMI)' group rule: ............................................. DISABLED.
34360 13:02:46 (0) ** => This will prevent any WMI remote connectivity to/from this machine.
34361 13:02:46 (0) ** - You can adjust the configuration by executing the following command:
34362 13:02:46 (0) ** i.e. 'NETSH.EXE ADVFIREWALL FIREWALL SET RULE GROUP="Windows Management Instrumentation (WMI)" NEW ENABLE=YES'
34363 13:02:46 (0) ** Note: With this command all inbound and outbound WMI rules are activated at once!
34364 13:02:46 (0) ** You can also enable each individual rule instead of activating the group rule.
34365 13:02:46 (0) **
34366 13:02:46 (0) ** ----------------------------------------------------------------------------------------------------------------------------------
34367 13:02:46 (0) ** DCOM Status: ........................................................................................................ OK.
34368 13:02:46 (0) ** WMI registry setup: ................................................................................................. OK.
34369 13:02:46 (0) ** INFO: WMI service has dependents: ................................................................................... 1 SERVICE(S)!
34370 13:02:46 (0) ** - Internet Connection Sharing (ICS) (SHAREDACCESS, StartMode='Disabled')
34371 13:02:46 (0) ** => If the WMI service is stopped, the listed service(s) will have to be stopped as well.
34372 13:02:46 (0) ** Note: If the service is marked with (*), it means that the service/application uses WMI but
34373 13:02:46 (0) ** there is no hard dependency on WMI. However, if the WMI service is stopped,
34374 13:02:46 (0) ** this can prevent the service/application to work as expected.
34375 13:02:46 (0) **
34376 13:02:46 (0) ** RPCSS service: ...................................................................................................... OK (Already started).
34377 13:02:46 (0) ** WINMGMT service: .................................................................................................... OK (Already started).
34378 13:02:46 (0) ** ----------------------------------------------------------------------------------------------------------------------------------
34379 13:02:46 (0) ** WMI service DCOM setup: ............................................................................................. OK.
34380 13:02:46 (0) ** WMI components DCOM registrations: .................................................................................. OK.
34381 13:02:46 (0) ** WMI ProgID registrations: ........................................................................................... OK.
34382 13:02:46 (0) ** WMI provider DCOM registrations: .................................................................................... OK.
34383 13:02:46 (0) ** WMI provider CIM registrations: ..................................................................................... OK.
34384 13:02:46 (0) ** WMI provider CLSIDs: ................................................................................................ OK.
34385 13:02:46 (2) !! WARNING: Some WMI providers EXE/DLL file(s) are missing: ............................................................ 1 WARNING(S)!
34386 13:02:46 (0) ** - ROOT/MICROSOFTACTIVEDIRECTORY, ReplProv1, replprov.dll
34387 13:02:46 (0) ** => This will make any operations related to the WMI class supported by the provider(s) to fail.
34388 13:02:46 (0) ** This can be due to:
34389 13:02:46 (0) ** - the de-installation of the software.
34390 13:02:46 (0) ** - the deletion of some files.
34391 13:02:46 (0) ** => If the software has been de-installed intentionally, then this information must be
34392 13:02:46 (0) ** removed from the WMI repository. You can use the 'WMIC.EXE' command to remove
34393 13:02:46 (0) ** the provider registration data.
34394 13:02:46 (0) ** i.e. 'WMIC.EXE /NAMESPACE:\\ROOT\MICROSOFTACTIVEDIRECTORY path __Win32Provider Where Name='ReplProv1' DELETE'
34395 13:02:46 (0) ** => If not, you must restore a copy of the missing provider EXE/DLL file(s) as indicated by the path.
34396 13:02:46 (0) ** You can retrieve the missing file from:
34397 13:02:46 (0) ** - A backup.
34398 13:02:46 (0) ** - The Windows CD.
34399 13:02:46 (0) ** - Another Windows installation using the same version and service pack level of the examined system.
34400 13:02:46 (0) ** - The original CD or software package installing this WMI provider.
34401 13:02:46 (0) **
34402 13:02:46 (0) ** ----------------------------------------------------------------------------------------------------------------------------------
34403 13:02:46 (0) ** INFO: User Account Control (UAC): ................................................................................... DISABLED.
34404 13:02:46 (0) ** INFO: Local Account Filtering: ...................................................................................... ENABLED.
34405 13:02:46 (0) ** => WMI tasks remotely accessing WMI information on this computer and requiring Administrative
34406 13:02:46 (0) ** privileges MUST use a DOMAIN account part of the Local Administrators group of this computer
34407 13:02:46 (0) ** to ensure that administrative privileges are granted. If a Local User account is used for remote
34408 13:02:46 (0) ** accesses, it will be reduced to a plain user (filtered token), even if it is part of the Local Administrators group.
34409 13:02:46 (0) **
34410 13:02:46 (0) ** DCOM security for 'My Computer' (Access Permissions/Edit Limits): ................................................... MODIFIED.
34411 13:02:46 (1) !! ERROR: Default trustee 'NT AUTHORITY\ANONYMOUS LOGON' has been REMOVED!
34412 13:02:46 (0) ** - REMOVED ACE:
34413 13:02:46 (0) ** ACEType: &h0
34414 13:02:46 (0) ** ACCESS_ALLOWED_ACE_TYPE
34415 13:02:46 (0) ** ACEFlags: &h0
34416 13:02:46 (0) ** ACEMask: &h7
34417 13:02:46 (0) ** DCOM_RIGHT_EXECUTE
34418 13:02:46 (0) ** DCOM_RIGHT_ACCESS_LOCAL
34419 13:02:46 (0) ** DCOM_RIGHT_ACCESS_REMOTE
34420 13:02:46 (0) **
34421 13:02:46 (0) ** => The REMOVED ACE was part of the DEFAULT setup for the trustee.
34422 13:02:46 (0) ** Removing default security will cause some operations to fail!
34423 13:02:46 (0) ** It is possible to fix this issue by editing the security descriptor and adding the ACE.
34424 13:02:46 (0) ** For DCOM objects, this can be done with 'DCOMCNFG.EXE'.
34425 13:02:46 (0) **
34426 13:02:46 (0) ** DCOM security for 'My Computer' (Access Permissions/Edit Limits): ................................................... MODIFIED.
34427 13:02:46 (1) !! ERROR: Default trustee 'BUILTIN\PERFORMANCE LOG USERS' has been REMOVED!
34428 13:02:46 (0) ** - REMOVED ACE:
34429 13:02:46 (0) ** ACEType: &h0
34430 13:02:46 (0) ** ACCESS_ALLOWED_ACE_TYPE
34431 13:02:46 (0) ** ACEFlags: &h0
34432 13:02:46 (0) ** ACEMask: &h7
34433 13:02:46 (0) ** DCOM_RIGHT_EXECUTE
34434 13:02:46 (0) ** DCOM_RIGHT_ACCESS_LOCAL
34435 13:02:46 (0) ** DCOM_RIGHT_ACCESS_REMOTE
34436 13:02:46 (0) **
34437 13:02:46 (0) ** => The REMOVED ACE was part of the DEFAULT setup for the trustee.
34438 13:02:46 (0) ** Removing default security will cause some operations to fail!
34439 13:02:46 (0) ** It is possible to fix this issue by editing the security descriptor and adding the ACE.
34440 13:02:46 (0) ** For DCOM objects, this can be done with 'DCOMCNFG.EXE'.
34441 13:02:46 (0) **
34442 13:02:46 (0) ** DCOM security for 'My Computer' (Access Permissions/Edit Limits): ................................................... MODIFIED.
34443 13:02:46 (1) !! ERROR: Default trustee 'EVERYONE' has been REMOVED!
34444 13:02:46 (0) ** - REMOVED ACE:
34445 13:02:46 (0) ** ACEType: &h0
34446 13:02:46 (0) ** ACCESS_ALLOWED_ACE_TYPE
34447 13:02:46 (0) ** ACEFlags: &h0
34448 13:02:46 (0) ** ACEMask: &h7
34449 13:02:46 (0) ** DCOM_RIGHT_EXECUTE
34450 13:02:46 (0) ** DCOM_RIGHT_ACCESS_LOCAL
34451 13:02:46 (0) ** DCOM_RIGHT_ACCESS_REMOTE
34452 13:02:46 (0) **
34453 13:02:46 (0) ** => The REMOVED ACE was part of the DEFAULT setup for the trustee.
34454 13:02:46 (0) ** Removing default security will cause some operations to fail!
34455 13:02:46 (0) ** It is possible to fix this issue by editing the security descriptor and adding the ACE.
34456 13:02:46 (0) ** For DCOM objects, this can be done with 'DCOMCNFG.EXE'.
34457 13:02:46 (0) **
34458 13:02:46 (0) ** DCOM security for 'My Computer' (Launch & Activation Permissions/Edit Default): ..................................... MODIFIED.
34459 13:02:46 (1) !! ERROR: Default trustee 'BUILTIN\ADMINISTRATORS' has been REMOVED!
34460 13:02:46 (0) ** - REMOVED ACE:
34461 13:02:46 (0) ** ACEType: &h0
34462 13:02:46 (0) ** ACCESS_ALLOWED_ACE_TYPE
34463 13:02:46 (0) ** ACEFlags: &h0
34464 13:02:46 (0) ** ACEMask: &h1F
34465 13:02:46 (0) ** DCOM_RIGHT_EXECUTE
34466 13:02:46 (0) ** DCOM_RIGHT_LAUNCH_LOCAL
34467 13:02:46 (0) ** DCOM_RIGHT_LAUNCH_REMOTE
34468 13:02:46 (0) ** DCOM_RIGHT_ACTIVATE_LOCAL
34469 13:02:46 (0) ** DCOM_RIGHT_ACTIVATE_REMOTE
34470 13:02:46 (0) **
34471 13:02:46 (0) ** => The REMOVED ACE was part of the DEFAULT setup for the trustee.
34472 13:02:46 (0) ** Removing default security will cause some operations to fail!
34473 13:02:46 (0) ** It is possible to fix this issue by editing the security descriptor and adding the ACE.
34474 13:02:46 (0) ** For DCOM objects, this can be done with 'DCOMCNFG.EXE'.
34475 13:02:46 (0) **
34476 13:02:46 (0) ** DCOM security for 'My Computer' (Launch & Activation Permissions/Edit Default): ..................................... MODIFIED.
34477 13:02:46 (1) !! ERROR: Default trustee 'NT AUTHORITY\INTERACTIVE' has been REMOVED!
34478 13:02:46 (0) ** - REMOVED ACE:
34479 13:02:46 (0) ** ACEType: &h0
34480 13:02:46 (0) ** ACCESS_ALLOWED_ACE_TYPE
34481 13:02:46 (0) ** ACEFlags: &h0
34482 13:02:46 (0) ** ACEMask: &h1F
34483 13:02:46 (0) ** DCOM_RIGHT_EXECUTE
34484 13:02:46 (0) ** DCOM_RIGHT_LAUNCH_LOCAL
34485 13:02:46 (0) ** DCOM_RIGHT_LAUNCH_REMOTE
34486 13:02:46 (0) ** DCOM_RIGHT_ACTIVATE_LOCAL
34487 13:02:46 (0) ** DCOM_RIGHT_ACTIVATE_REMOTE
34488 13:02:46 (0) **
34489 13:02:46 (0) ** => The REMOVED ACE was part of the DEFAULT setup for the trustee.
34490 13:02:46 (0) ** Removing default security will cause some operations to fail!
34491 13:02:46 (0) ** It is possible to fix this issue by editing the security descriptor and adding the ACE.
34492 13:02:46 (0) ** For DCOM objects, this can be done with 'DCOMCNFG.EXE'.
34493 13:02:46 (0) **
34494 13:02:46 (0) ** DCOM security for 'My Computer' (Launch & Activation Permissions/Edit Default): ..................................... MODIFIED.
34495 13:02:46 (1) !! ERROR: Default trustee 'NT AUTHORITY\SYSTEM' has been REMOVED!
34496 13:02:46 (0) ** - REMOVED ACE:
34497 13:02:46 (0) ** ACEType: &h0
34498 13:02:46 (0) ** ACCESS_ALLOWED_ACE_TYPE
34499 13:02:46 (0) ** ACEFlags: &h0
34500 13:02:46 (0) ** ACEMask: &h1F
34501 13:02:46 (0) ** DCOM_RIGHT_EXECUTE
34502 13:02:46 (0) ** DCOM_RIGHT_LAUNCH_LOCAL
34503 13:02:46 (0) ** DCOM_RIGHT_LAUNCH_REMOTE
34504 13:02:46 (0) ** DCOM_RIGHT_ACTIVATE_LOCAL
34505 13:02:46 (0) ** DCOM_RIGHT_ACTIVATE_REMOTE
34506 13:02:46 (0) **
34507 13:02:46 (0) ** => The REMOVED ACE was part of the DEFAULT setup for the trustee.
34508 13:02:46 (0) ** Removing default security will cause some operations to fail!
34509 13:02:46 (0) ** It is possible to fix this issue by editing the security descriptor and adding the ACE.
34510 13:02:46 (0) ** For DCOM objects, this can be done with 'DCOMCNFG.EXE'.
34511 13:02:46 (0) **
34512 13:02:46 (0) ** DCOM security for 'My Computer' (Launch & Activation Permissions/Edit Limits): ...................................... MODIFIED.
34513 13:02:46 (1) !! ERROR: Default trustee 'BUILTIN\ADMINISTRATORS' has been REMOVED!
34514 13:02:46 (0) ** - REMOVED ACE:
34515 13:02:46 (0) ** ACEType: &h0
34516 13:02:46 (0) ** ACCESS_ALLOWED_ACE_TYPE
34517 13:02:46 (0) ** ACEFlags: &h0
34518 13:02:46 (0) ** ACEMask: &h1F
34519 13:02:46 (0) ** DCOM_RIGHT_EXECUTE
34520 13:02:46 (0) ** DCOM_RIGHT_LAUNCH_LOCAL
34521 13:02:46 (0) ** DCOM_RIGHT_LAUNCH_REMOTE
34522 13:02:46 (0) ** DCOM_RIGHT_ACTIVATE_LOCAL
34523 13:02:46 (0) ** DCOM_RIGHT_ACTIVATE_REMOTE
34524 13:02:46 (0) **
34525 13:02:46 (0) ** => The REMOVED ACE was part of the DEFAULT setup for the trustee.
34526 13:02:46 (0) ** Removing default security will cause some operations to fail!
34527 13:02:46 (0) ** It is possible to fix this issue by editing the security descriptor and adding the ACE.
34528 13:02:46 (0) ** For DCOM objects, this can be done with 'DCOMCNFG.EXE'.
34529 13:02:46 (0) **
34530 13:02:46 (0) ** DCOM security for 'My Computer' (Launch & Activation Permissions/Edit Limits): ...................................... MODIFIED.
34531 13:02:46 (1) !! ERROR: Default trustee 'BUILTIN\PERFORMANCE LOG USERS' has been REMOVED!
34532 13:02:46 (0) ** - REMOVED ACE:
34533 13:02:46 (0) ** ACEType: &h0
34534 13:02:46 (0) ** ACCESS_ALLOWED_ACE_TYPE
34535 13:02:46 (0) ** ACEFlags: &h0
34536 13:02:46 (0) ** ACEMask: &h1F
34537 13:02:46 (0) ** DCOM_RIGHT_EXECUTE
34538 13:02:46 (0) ** DCOM_RIGHT_LAUNCH_LOCAL
34539 13:02:46 (0) ** DCOM_RIGHT_LAUNCH_REMOTE
34540 13:02:46 (0) ** DCOM_RIGHT_ACTIVATE_LOCAL
34541 13:02:46 (0) ** DCOM_RIGHT_ACTIVATE_REMOTE
34542 13:02:46 (0) **
34543 13:02:46 (0) ** => The REMOVED ACE was part of the DEFAULT setup for the trustee.
34544 13:02:46 (0) ** Removing default security will cause some operations to fail!
34545 13:02:46 (0) ** It is possible to fix this issue by editing the security descriptor and adding the ACE.
34546 13:02:46 (0) ** For DCOM objects, this can be done with 'DCOMCNFG.EXE'.
34547 13:02:46 (0) **
34548 13:02:46 (0) ** DCOM security for 'My Computer' (Launch & Activation Permissions/Edit Limits): ...................................... MODIFIED.
34549 13:02:46 (1) !! ERROR: Default trustee 'EVERYONE' has been REMOVED!
34550 13:02:46 (0) ** - REMOVED ACE:
34551 13:02:46 (0) ** ACEType: &h0
34552 13:02:46 (0) ** ACCESS_ALLOWED_ACE_TYPE
34553 13:02:46 (0) ** ACEFlags: &h0
34554 13:02:46 (0) ** ACEMask: &hB
34555 13:02:46 (0) ** DCOM_RIGHT_EXECUTE
34556 13:02:46 (0) ** DCOM_RIGHT_LAUNCH_LOCAL
34557 13:02:46 (0) ** DCOM_RIGHT_ACTIVATE_LOCAL
34558 13:02:46 (0) **
34559 13:02:46 (0) ** => The REMOVED ACE was part of the DEFAULT setup for the trustee.
34560 13:02:46 (0) ** Removing default security will cause some operations to fail!
34561 13:02:46 (0) ** It is possible to fix this issue by editing the security descriptor and adding the ACE.
34562 13:02:46 (0) ** For DCOM objects, this can be done with 'DCOMCNFG.EXE'.
34563 13:02:46 (0) **
34564 13:02:46 (0) ** DCOM security for 'Microsoft WMI Provider Subsystem Host' (Launch & Activation Permissions): ........................ MODIFIED.
34565 13:02:46 (1) !! ERROR: Default trustee 'BUILTIN\ADMINISTRATORS' has been REMOVED!
34566 13:02:46 (0) ** - REMOVED ACE:
34567 13:02:46 (0) ** ACEType: &h0
34568 13:02:46 (0) ** ACCESS_ALLOWED_ACE_TYPE
34569 13:02:46 (0) ** ACEFlags: &h0
34570 13:02:46 (0) ** ACEMask: &h1F
34571 13:02:46 (0) ** DCOM_RIGHT_EXECUTE
34572 13:02:46 (0) ** DCOM_RIGHT_LAUNCH_LOCAL
34573 13:02:46 (0) ** DCOM_RIGHT_LAUNCH_REMOTE
34574 13:02:46 (0) ** DCOM_RIGHT_ACTIVATE_LOCAL
34575 13:02:46 (0) ** DCOM_RIGHT_ACTIVATE_REMOTE
34576 13:02:46 (0) **
34577 13:02:46 (0) ** => The REMOVED ACE was part of the DEFAULT setup for the trustee.
34578 13:02:46 (0) ** Removing default security will cause some operations to fail!
34579 13:02:46 (0) ** It is possible to fix this issue by editing the security descriptor and adding the ACE.
34580 13:02:46 (0) ** For DCOM objects, this can be done with 'DCOMCNFG.EXE'.
34581 13:02:46 (0) **
34582 13:02:46 (0) ** DCOM security for 'Microsoft WMI Provider Subsystem Host' (Launch & Activation Permissions): ........................ MODIFIED.
34583 13:02:46 (1) !! ERROR: Default trustee 'NT AUTHORITY\INTERACTIVE' has been REMOVED!
34584 13:02:46 (0) ** - REMOVED ACE:
34585 13:02:46 (0) ** ACEType: &h0
34586 13:02:46 (0) ** ACCESS_ALLOWED_ACE_TYPE
34587 13:02:46 (0) ** ACEFlags: &h0
34588 13:02:46 (0) ** ACEMask: &h1F
34589 13:02:46 (0) ** DCOM_RIGHT_EXECUTE
34590 13:02:46 (0) ** DCOM_RIGHT_LAUNCH_LOCAL
34591 13:02:46 (0) ** DCOM_RIGHT_LAUNCH_REMOTE
34592 13:02:46 (0) ** DCOM_RIGHT_ACTIVATE_LOCAL
34593 13:02:46 (0) ** DCOM_RIGHT_ACTIVATE_REMOTE
34594 13:02:46 (0) **
34595 13:02:46 (0) ** => The REMOVED ACE was part of the DEFAULT setup for the trustee.
34596 13:02:46 (0) ** Removing default security will cause some operations to fail!
34597 13:02:46 (0) ** It is possible to fix this issue by editing the security descriptor and adding the ACE.
34598 13:02:46 (0) ** For DCOM objects, this can be done with 'DCOMCNFG.EXE'.
34599 13:02:46 (0) **
34600 13:02:46 (0) ** DCOM security for 'Microsoft WMI Provider Subsystem Host' (Launch & Activation Permissions): ........................ MODIFIED.
34601 13:02:46 (1) !! ERROR: Default trustee 'NT AUTHORITY\SYSTEM' has been REMOVED!
34602 13:02:46 (0) ** - REMOVED ACE:
34603 13:02:46 (0) ** ACEType: &h0
34604 13:02:46 (0) ** ACCESS_ALLOWED_ACE_TYPE
34605 13:02:46 (0) ** ACEFlags: &h0
34606 13:02:46 (0) ** ACEMask: &h1F
34607 13:02:46 (0) ** DCOM_RIGHT_EXECUTE
34608 13:02:46 (0) ** DCOM_RIGHT_LAUNCH_LOCAL
34609 13:02:46 (0) ** DCOM_RIGHT_LAUNCH_REMOTE
34610 13:02:46 (0) ** DCOM_RIGHT_ACTIVATE_LOCAL
34611 13:02:46 (0) ** DCOM_RIGHT_ACTIVATE_REMOTE
34612 13:02:46 (0) **
34613 13:02:46 (0) ** => The REMOVED ACE was part of the DEFAULT setup for the trustee.
34614 13:02:46 (0) ** Removing default security will cause some operations to fail!
34615 13:02:46 (0) ** It is possible to fix this issue by editing the security descriptor and adding the ACE.
34616 13:02:46 (0) ** For DCOM objects, this can be done with 'DCOMCNFG.EXE'.
34617 13:02:46 (0) **
34618 13:02:46 (0) ** DCOM security for 'Microsoft WMI Provider Subsystem Host' (Launch & Activation Permissions): ........................ MODIFIED.
34619 13:02:46 (1) !! ERROR: Default trustee 'NT AUTHORITY\NETWORK SERVICE' has been REMOVED!
34620 13:02:46 (0) ** - REMOVED ACE:
34621 13:02:46 (0) ** ACEType: &h0
34622 13:02:46 (0) ** ACCESS_ALLOWED_ACE_TYPE
34623 13:02:46 (0) ** ACEFlags: &h0
34624 13:02:46 (0) ** ACEMask: &h1F
34625 13:02:46 (0) ** DCOM_RIGHT_EXECUTE
34626 13:02:46 (0) ** DCOM_RIGHT_LAUNCH_LOCAL
34627 13:02:46 (0) ** DCOM_RIGHT_LAUNCH_REMOTE
34628 13:02:46 (0) ** DCOM_RIGHT_ACTIVATE_LOCAL
34629 13:02:46 (0) ** DCOM_RIGHT_ACTIVATE_REMOTE
34630 13:02:46 (0) **
34631 13:02:46 (0) ** => The REMOVED ACE was part of the DEFAULT setup for the trustee.
34632 13:02:46 (0) ** Removing default security will cause some operations to fail!
34633 13:02:46 (0) ** It is possible to fix this issue by editing the security descriptor and adding the ACE.
34634 13:02:46 (0) ** For DCOM objects, this can be done with 'DCOMCNFG.EXE'.
34635 13:02:46 (0) **
34636 13:02:46 (0) ** DCOM security for 'Microsoft WMI Provider Subsystem Host' (Launch & Activation Permissions): ........................ MODIFIED.
34637 13:02:46 (1) !! ERROR: Default trustee 'NT AUTHORITY\LOCAL SERVICE' has been REMOVED!
34638 13:02:46 (0) ** - REMOVED ACE:
34639 13:02:46 (0) ** ACEType: &h0
34640 13:02:46 (0) ** ACCESS_ALLOWED_ACE_TYPE
34641 13:02:46 (0) ** ACEFlags: &h0
34642 13:02:46 (0) ** ACEMask: &h1F
34643 13:02:46 (0) ** DCOM_RIGHT_EXECUTE
34644 13:02:46 (0) ** DCOM_RIGHT_LAUNCH_LOCAL
34645 13:02:46 (0) ** DCOM_RIGHT_LAUNCH_REMOTE
34646 13:02:46 (0) ** DCOM_RIGHT_ACTIVATE_LOCAL
34647 13:02:46 (0) ** DCOM_RIGHT_ACTIVATE_REMOTE
34648 13:02:46 (0) **
34649 13:02:46 (0) ** => The REMOVED ACE was part of the DEFAULT setup for the trustee.
34650 13:02:46 (0) ** Removing default security will cause some operations to fail!
34651 13:02:46 (0) ** It is possible to fix this issue by editing the security descriptor and adding the ACE.
34652 13:02:46 (0) ** For DCOM objects, this can be done with 'DCOMCNFG.EXE'.
34653 13:02:46 (0) **
34654 13:02:46 (0) **
34655 13:02:46 (0) ** DCOM security warning(s) detected: .................................................................................. 0.
34656 13:02:46 (0) ** DCOM security error(s) detected: .................................................................................... 14.
34657 13:02:46 (0) ** WMI security warning(s) detected: ................................................................................... 0.
34658 13:02:46 (0) ** WMI security error(s) detected: ..................................................................................... 0.
34659 13:02:46 (0) **
34660 13:02:46 (1) !! ERROR: Overall DCOM security status: ................................................................................ ERROR!
34661 13:02:46 (0) ** Overall WMI security status: ........................................................................................ OK.
34662 13:02:46 (0) ** - Started at 'Root' --------------------------------------------------------------------------------------------------------------
34663 13:02:46 (0) ** INFO: WMI permanent SUBSCRIPTION(S): ................................................................................ 1.
34664 13:02:46 (0) ** - ROOT/SUBSCRIPTION, NTEventLogEventConsumer.Name="SCM Event Log Consumer".
34665 13:02:46 (0) ** 'select * from MSFT_SCMEventLogEvent'
34666 13:02:46 (0) **
34667 13:02:46 (0) ** WMI TIMER instruction(s): ........................................................................................... NONE.
34668 13:02:46 (0) ** INFO: WMI namespace(s) requiring PACKET PRIVACY: .................................................................... 3 NAMESPACE(S)!
34669 13:02:46 (0) ** - ROOT/CIMV2/SECURITY/MICROSOFTTPM.
34670 13:02:46 (0) ** - ROOT/CIMV2/TERMINALSERVICES.
34671 13:02:46 (0) ** - ROOT/SERVICEMODEL.
34672 13:02:46 (0) ** => When remotely connecting, the namespace(s) listed require(s) the WMI client to
34673 13:02:46 (0) ** use an encrypted connection by specifying the PACKET PRIVACY authentication level.
34674 13:02:46 (0) ** (RPC_C_AUTHN_LEVEL_PKT_PRIVACY or PktPrivacy flags)
34675 13:02:46 (0) ** i.e. 'WMIC.EXE /NODE:"ISWDC2" /AUTHLEVEL:Pktprivacy /NAMESPACE:\\ROOT\SERVICEMODEL Class __SystemSecurity'
34676 13:02:46 (0) **
34677 13:02:46 (0) ** WMI MONIKER CONNECTIONS: ............................................................................................ OK.
34678 13:02:46 (0) ** WMI CONNECTIONS: .................................................................................................... OK.
34679 13:02:46 (1) !! ERROR: WMI GET operation errors reported: ........................................................................... 32 ERROR(S)!
34680 13:02:46 (0) ** - Root/CIMV2, MSFT_NetInvalidDriverDependency, 0x80041002 - (WBEM_E_NOT_FOUND) Object cannot be found.
34681 13:02:46 (0) ** MOF Registration: ''
34682 13:02:46 (0) ** - Root/CIMV2, Win32_OsBaselineProvider, 0x80041002 - (WBEM_E_NOT_FOUND) Object cannot be found.
34683 13:02:46 (0) ** MOF Registration: ''
34684 13:02:46 (0) ** - Root/CIMV2, Win32_OsBaseline, 0x80041002 - (WBEM_E_NOT_FOUND) Object cannot be found.
34685 13:02:46 (0) ** MOF Registration: ''
34686 13:02:46 (0) ** - Root/CIMV2, Win32_DriverVXD, 0x80041002 - (WBEM_E_NOT_FOUND) Object cannot be found.
34687 13:02:46 (0) ** MOF Registration: ''
34688 13:02:46 (0) ** - Root/CIMV2, Win32_PerfFormattedData_BITS_BITSNetUtilization, 0x80041002 - (WBEM_E_NOT_FOUND) Object cannot be found.
34689 13:02:46 (0) ** MOF Registration: ''
34690 13:02:46 (0) ** - Root/CIMV2, Win32_PerfRawData_BITS_BITSNetUtilization, 0x80041002 - (WBEM_E_NOT_FOUND) Object cannot be found.
34691 13:02:46 (0) ** MOF Registration: ''
34692 13:02:46 (0) ** - Root/CIMV2, Win32_PerfFormattedData_Counters_GenericIKEandAuthIP, 0x80041002 - (WBEM_E_NOT_FOUND) Object cannot be found.
34693 13:02:46 (0) ** MOF Registration: ''
34694 13:02:46 (0) ** - Root/CIMV2, Win32_PerfRawData_Counters_GenericIKEandAuthIP, 0x80041002 - (WBEM_E_NOT_FOUND) Object cannot be found.
34695 13:02:46 (0) ** MOF Registration: ''
34696 13:02:46 (0) ** - Root/CIMV2, Win32_PerfFormattedData_Counters_IPsecAuthIPv4, 0x80041002 - (WBEM_E_NOT_FOUND) Object cannot be found.
34697 13:02:46 (0) ** MOF Registration: ''
34698 13:02:46 (0) ** - Root/CIMV2, Win32_PerfRawData_Counters_IPsecAuthIPv4, 0x80041002 - (WBEM_E_NOT_FOUND) Object cannot be found.
34699 13:02:46 (0) ** MOF Registration: ''
34700 13:02:46 (0) ** - Root/CIMV2, Win32_PerfFormattedData_Counters_IPsecAuthIPv6, 0x80041002 - (WBEM_E_NOT_FOUND) Object cannot be found.
34701 13:02:46 (0) ** MOF Registration: ''
34702 13:02:46 (0) ** - Root/CIMV2, Win32_PerfRawData_Counters_IPsecAuthIPv6, 0x80041002 - (WBEM_E_NOT_FOUND) Object cannot be found.
34703 13:02:46 (0) ** MOF Registration: ''
34704 13:02:46 (0) ** - Root/CIMV2, Win32_PerfFormattedData_Counters_IPsecIKEv4, 0x80041002 - (WBEM_E_NOT_FOUND) Object cannot be found.
34705 13:02:46 (0) ** MOF Registration: ''
34706 13:02:46 (0) ** - Root/CIMV2, Win32_PerfRawData_Counters_IPsecIKEv4, 0x80041002 - (WBEM_E_NOT_FOUND) Object cannot be found.
34707 13:02:46 (0) ** MOF Registration: ''
34708 13:02:46 (0) ** - Root/CIMV2, Win32_PerfFormattedData_Counters_IPsecIKEv6, 0x80041002 - (WBEM_E_NOT_FOUND) Object cannot be found.
34709 13:02:46 (0) ** MOF Registration: ''
34710 13:02:46 (0) ** - Root/CIMV2, Win32_PerfRawData_Counters_IPsecIKEv6, 0x80041002 - (WBEM_E_NOT_FOUND) Object cannot be found.
34711 13:02:46 (0) ** MOF Registration: ''
34712 13:02:46 (0) ** - Root/CIMV2, Win32_PerfFormattedData_TermService_TerminalServices, 0x80041002 - (WBEM_E_NOT_FOUND) Object cannot be found.
34713 13:02:46 (0) ** MOF Registration: ''
34714 13:02:46 (0) ** - Root/CIMV2, Win32_PerfRawData_TermService_TerminalServices, 0x80041002 - (WBEM_E_NOT_FOUND) Object cannot be found.
34715 13:02:46 (0) ** MOF Registration: ''
34716 13:02:46 (0) ** - Root/WMI, ReserveDisjoinThread, 0x80041002 - (WBEM_E_NOT_FOUND) Object cannot be found.
34717 13:02:46 (0) ** MOF Registration: ''
34718 13:02:46 (0) ** - Root/WMI, ReserveLateCount, 0x80041002 - (WBEM_E_NOT_FOUND) Object cannot be found.
34719 13:02:46 (0) ** MOF Registration: ''
34720 13:02:46 (0) ** - Root/WMI, ReserveJoinThread, 0x80041002 - (WBEM_E_NOT_FOUND) Object cannot be found.
34721 13:02:46 (0) ** MOF Registration: ''
34722 13:02:46 (0) ** - Root/WMI, ReserveDelete, 0x80041002 - (WBEM_E_NOT_FOUND) Object cannot be found.
34723 13:02:46 (0) ** MOF Registration: ''
34724 13:02:46 (0) ** - Root/WMI, ReserveBandwidth, 0x80041002 - (WBEM_E_NOT_FOUND) Object cannot be found.
34725 13:02:46 (0) ** MOF Registration: ''
34726 13:02:46 (0) ** - Root/WMI, ReserveCreate, 0x80041002 - (WBEM_E_NOT_FOUND) Object cannot be found.
34727 13:02:46 (0) ** MOF Registration: ''
34728 13:02:46 (0) ** - Root/WMI, SystemConfig_PhyDisk, 0x80041002 - (WBEM_E_NOT_FOUND) Object cannot be found.
34729 13:02:46 (0) ** MOF Registration: ''
34730 13:02:46 (0) ** - Root/WMI, SystemConfig_Video, 0x80041002 - (WBEM_E_NOT_FOUND) Object cannot be found.
34731 13:02:46 (0) ** MOF Registration: ''
34732 13:02:46 (0) ** - Root/WMI, SystemConfig_IDEChannel, 0x80041002 - (WBEM_E_NOT_FOUND) Object cannot be found.
34733 13:02:46 (0) ** MOF Registration: ''
34734 13:02:46 (0) ** - Root/WMI, SystemConfig_NIC, 0x80041002 - (WBEM_E_NOT_FOUND) Object cannot be found.
34735 13:02:46 (0) ** MOF Registration: ''
34736 13:02:46 (0) ** - Root/WMI, SystemConfig_Network, 0x80041002 - (WBEM_E_NOT_FOUND) Object cannot be found.
34737 13:02:46 (0) ** MOF Registration: ''
34738 13:02:46 (0) ** - Root/WMI, SystemConfig_CPU, 0x80041002 - (WBEM_E_NOT_FOUND) Object cannot be found.
34739 13:02:46 (0) ** MOF Registration: ''
34740 13:02:46 (0) ** - Root/WMI, SystemConfig_LogDisk, 0x80041002 - (WBEM_E_NOT_FOUND) Object cannot be found.
34741 13:02:46 (0) ** MOF Registration: ''
34742 13:02:46 (0) ** - Root/WMI, SystemConfig_Power, 0x80041002 - (WBEM_E_NOT_FOUND) Object cannot be found.
34743 13:02:46 (0) ** MOF Registration: ''
34744 13:02:46 (0) ** => When a WMI performance class is missing (i.e. 'Win32_PerfRawData_TermService_TerminalServices'), it is generally due to
34745 13:02:46 (0) ** a lack of buffer refresh of the WMI class provider exposing the WMI performance counters.
34746 13:02:46 (0) ** You can refresh the WMI class provider buffer with the following command:
34747 13:02:46 (0) **
34748 13:02:46 (0) ** i.e. 'WINMGMT.EXE /SYNCPERF'
34749 13:02:46 (0) **
34750 13:02:46 (0) ** WMI MOF representations: ............................................................................................ OK.
34751 13:02:46 (0) ** WMI QUALIFIER access operations: .................................................................................... OK.
34752 13:02:46 (0) ** WMI ENUMERATION operations: ......................................................................................... OK.
34753 13:02:46 (0) ** WMI EXECQUERY operations: ........................................................................................... OK.
34754 13:02:46 (2) !! WARNING: WMI GET VALUE operation errors reported: ................................................................... 5 WARNING(S)!
34755 13:02:46 (0) ** - Root, Instance: __EventConsumerProviderCacheControl=@, Property: ClearAfter='00000000000030.000000:000' (Expected default='00000000000500.000000:000').
34756 13:02:46 (0) ** - Root, Instance: __EventProviderCacheControl=@, Property: ClearAfter='00000000000030.000000:000' (Expected default='00000000000500.000000:000').
34757 13:02:46 (0) ** - Root, Instance: __EventSinkCacheControl=@, Property: ClearAfter='00000000000015.000000:000' (Expected default='00000000000230.000000:000').
34758 13:02:46 (0) ** - Root, Instance: __ObjectProviderCacheControl=@, Property: ClearAfter='00000000000030.000000:000' (Expected default='00000000000500.000000:000').
34759 13:02:46 (0) ** - Root, Instance: __PropertyProviderCacheControl=@, Property: ClearAfter='00000000000030.000000:000' (Expected default='00000000000500.000000:000').
34760 13:02:46 (0) **
34761 13:02:46 (0) ** WMI WRITE operations: ............................................................................................... NOT TESTED.
34762 13:02:46 (0) ** WMI PUT operations: ................................................................................................. NOT TESTED.
34763 13:02:46 (0) ** WMI DELETE operations: .............................................................................................. NOT TESTED.
34764 13:02:46 (0) ** WMI static instances retrieved: ..................................................................................... 1822.
34765 13:02:46 (0) ** WMI dynamic instances retrieved: .................................................................................... 0.
34766 13:02:46 (0) ** WMI instance request cancellations (to limit performance impact): ................................................... 1.
34767 13:02:46 (0) ** ----------------------------------------------------------------------------------------------------------------------------------
34768 13:02:46 (0) ** # of Event Log events BEFORE WMIDiag execution since the last 20 day(s):
34769 13:02:46 (0) ** DCOM: ............................................................................................................. 0.
34770 13:02:46 (0) ** WINMGMT: .......................................................................................................... 0.
34771 13:02:46 (0) ** WMIADAPTER: ....................................................................................................... 0.
34772 13:02:46 (0) **
34773 13:02:46 (0) ** # of additional Event Log events AFTER WMIDiag execution:
34774 13:02:46 (0) ** DCOM: ............................................................................................................. 0.
34775 13:02:46 (0) ** WINMGMT: .......................................................................................................... 0.
34776 13:02:46 (0) ** WMIADAPTER: ....................................................................................................... 0.
34777 13:02:46 (0) **
34778 13:02:46 (0) ** 32 error(s) 0x80041002 - (WBEM_E_NOT_FOUND) Object cannot be found
34779 13:02:46 (0) ** => This error is typically a WMI error. This WMI error is due to:
34780 13:02:46 (0) ** - a missing WMI class definition or object.
34781 13:02:46 (0) ** (See any GET, ENUMERATION, EXECQUERY and GET VALUE operation failures).
34782 13:02:46 (0) ** You can correct the missing class definitions by:
34783 13:02:46 (0) ** - Manually recompiling the MOF file(s) with the 'MOFCOMP <FileName.MOF>' command.
34784 13:02:46 (0) ** Note: You can build a list of classes in relation with their WMI provider and MOF file with WMIDiag.
34785 13:02:46 (0) ** (This list can be built on a similar and working WMI Windows installation)
34786 13:02:46 (0) ** The following command line must be used:
34787 13:02:46 (0) ** i.e. 'WMIDiag CorrelateClassAndProvider'
34788 13:02:46 (0) ** Note: When a WMI performance class is missing, you can manually resynchronize performance counters
34789 13:02:46 (0) ** with WMI by starting the ADAP process.
34790 13:02:46 (0) ** - a WMI repository corruption.
34791 13:02:46 (0) ** In such a case, you must rerun WMIDiag with 'WriteInRepository' parameter
34792 13:02:46 (0) ** to validate the WMI repository operations.
34793 13:02:46 (0) ** Note: ENSURE you are an administrator with FULL access to WMI EVERY namespaces of the computer before
34794 13:02:46 (0) ** executing the WriteInRepository command. To write temporary data from the Root namespace, use:
34795 13:02:46 (0) ** i.e. 'WMIDiag WriteInRepository=Root'
34796 13:02:46 (0) ** - If the WriteInRepository command fails, while being an Administrator with ALL accesses to ALL namespaces
34797 13:02:46 (0) ** the WMI repository must be reconstructed.
34798 13:02:46 (0) ** Note: The WMI repository reconstruction requires to locate all MOF files needed to rebuild the repository,
34799 13:02:46 (0) ** otherwise some applications may fail after the reconstruction.
34800 13:02:46 (0) ** This can be achieved with the following command:
34801 13:02:46 (0) ** i.e. 'WMIDiag ShowMOFErrors'
34802 13:02:46 (0) ** Note: The repository reconstruction must be a LAST RESORT solution and ONLY after executing
34803 13:02:46 (0) ** ALL fixes previously mentioned.
34804 13:02:46 (2) !! WARNING: Static information stored by external applications in the repository will be LOST! (i.e. SMS Inventory)
34805 13:02:46 (0) **
34806 13:02:46 (0) ** ----------------------------------------------------------------------------------------------------------------------------------
34807 13:02:46 (0) ** WMI Registry key setup: ............................................................................................. OK.
34808 13:02:46 (0) ** ----------------------------------------------------------------------------------------------------------------------------------
34809 13:02:46 (0) ** ----------------------------------------------------------------------------------------------------------------------------------
34810 13:02:46 (0) ** ----------------------------------------------------------------------------------------------------------------------------------
34811 13:02:46 (0) ** ----------------------------------------------------------------------------------------------------------------------------------
34812 13:02:46 (0) **
34813 13:02:46 (0) ** ----------------------------------------------------------------------------------------------------------------------------------
34814 13:02:46 (0) ** ------------------------------------------------------ WMI REPORT: END -----------------------------------------------------------
34815 13:02:46 (0) ** ----------------------------------------------------------------------------------------------------------------------------------
34816 13:02:46 (0) **
34817 13:02:46 (0) ** ERROR: WMIDiag detected issues that could prevent WMI to work properly!. Check 'C:\USERS\ABCDEF\APPDATA\LOCAL\TEMP\WMIDIAG-V2.1_2K8R2.SRV.SP1.64_ISWDC2_2014.05.22_12.49.13.LOG' for details.
34818 13:02:46 (0) **
34819 13:02:46 (0) ** WMIDiag v2.1 ended on Donnerstag, 22. Mai 2014 at 13:02 (W:89 E:52 S:1).
There are a lot of error in the report and I don't know, whether they are relevant or how to solve them. To my current knowledge, I need to solve at least some of them so that I can access the local WMI repository again and get replication back working.
But after hours of research I am stuck. Any hints are greatly appreciated.
Regards,
Oliver

I don't know why, but soon after posting this, I found a solution to the problem. The WMI part was solved in this thread:
http://social.technet.microsoft.com/Forums/windowsserver/en-US/953be9ef-e9e3-4885-a5c4-47fc475ba562/dfs-is-not-working-anymore?forum=winserverfiles
The relevant portion is this:
Open a CMD prompt in %windir%\system32\wbem
mofcomp dfsrprovs.mof
net stop winmgmt
net start winmgmt
net start iphlpsvc
net stop dfsr
net start dfsr
I don't know why recompiling of all mof did not solve the problem, but the solution above did. Restarting the DCs solved the communication issue. I don't know why the primary DC forgot about the WMI DFS provider or why communication failed. However, it is
working again, it seems.

SCCM Client Push Installation Wizard does not install the client. CCMSetup folder - not created

Hello,
I have tried running the Client Push wizard for a single computer or a pilot collection of 8 computers, the result is always
the same - no SCCM client is installed on any computer.
The computers are running 32-bit Windows XP SP2.
The Windows firewall is disabled.
The client push installation account is setup and have domain admin and local admin privileges. Client Push automatic method
is not enabled.
The domain is AD WIndows 2000.
The SCCM server is running Windows 2003 R2 SP2 64bit Standard.
The AD schema has been extended.
MP, and SLP are installed and published. (MP is published in DNS as well.)
FSP is installed.
MP, SLP and FSP are running on the same server.
SQL 2005 server is running locally.
System management container is created and all rights and permissions delegated.
With the Push installation account I can access C$ share on the client computer from the SCCM server.
RPC, Remote registry, WMI services are running on the client machines.
All prerequisites are installed from the client folder on SCCM server- latest BITS 2.5, Windows installer 3.1 and MSXML6.
All computers are in the same IP subnet which is listed in the boundaries.
Yet, the client is not being installed.
No CCMSetup folder is created on the client machines in Windows\System32 folder, so it is really difficult to troubleshoot
what the is the issue. I do not see anything helpful in the ccm.log on the server.
I have tried running the CCMSetup.exe manually on one of the workstations and that was successful and reported back to the
SCCM server / console.
What else I should check / try? I really want to push agents via the wizard.
Thank you,
Peter

Hi Wally,
I have changed 2 things:
1. Enabed automatic push installation (so I am not usign the wizard any more)
2. Changed the IP subnet to IP ranges in the site boundairies.
After runnignt the discovery, I was able to see some activities in the ccm.log. A ccmsetup folder is now created but the agent is still not instaleld. Here is the ccmsetup.log
==================================
<![LOG[==========[ ccmsetup started in process 3140 ]==========]LOG]!><time="09:45:07.045+240" date="12-06-2007" component="ccmsetup" context="" type="1" thread="3108" file="ccmsetup.cpp:8853">
<![LOG[Version: 4.0.5931.0000]LOG]!><time="09:45:07.045+240" date="12-06-2007" component="ccmsetup" context="" type="1" thread="3108" file="ccmsetup.cpp:1913">
<![LOG[Command line parameters for ccmsetup have been specified. No registry lookup for command line parameters is required.]LOG]!><time="09:45:07.045+240" date="12-06-2007" component="ccmsetup" context="" type="1" thread="3108" file="ccmsetup.cpp:3937">
<![LOG[Command line: "C:\WINDOWS\system32\ccmsetup\ccmsetup.exe" /runservice /config:MobileClient.tcf]LOG]!><time="09:45:07.045+240" date="12-06-2007" component="ccmsetup" context="" type="1" thread="3108" file="ccmsetup.cpp:3946">
<![LOG[CCMHTTPPORT:    80]LOG]!><time="09:45:07.045+240" date="12-06-2007" component="ccmsetup" context="" type="1" thread="3108" file="ccmsetup.cpp:7851">
<![LOG[CCMHTTPSPORT:    443]LOG]!><time="09:45:07.045+240" date="12-06-2007" component="ccmsetup" context="" type="1" thread="3108" file="ccmsetup.cpp:7866">
<![LOG[CCMHTTPSSTATE:    0]LOG]!><time="09:45:07.045+240" date="12-06-2007" component="ccmsetup" context="" type="1" thread="3108" file="ccmsetup.cpp:7884">
<![LOG[CCMHTTPSCERTNAME:    ]LOG]!><time="09:45:07.045+240" date="12-06-2007" component="ccmsetup" context="" type="1" thread="3108" file="ccmsetup.cpp:7912">
<![LOG[FSP:    HFXDBSSOM.CORP.EASTLINK.CA]LOG]!><time="09:45:07.045+240" date="12-06-2007" component="ccmsetup" context="" type="1" thread="3108" file="ccmsetup.cpp:7927">
<![LOG[CCMFIRSTCERT:    0]LOG]!><time="09:45:07.061+240" date="12-06-2007" component="ccmsetup" context="" type="1" thread="3108" file="ccmsetup.cpp:7969">
<![LOG[Config file:      C:\WINDOWS\system32\ccmsetup\MobileClient.tcf]LOG]!><time="09:45:07.061+240" date="12-06-2007" component="ccmsetup" context="" type="1" thread="3108" file="ccmsetup.cpp:4341">
<![LOG[Retry time:       10 minute(s)]LOG]!><time="09:45:07.061+240" date="12-06-2007" component="ccmsetup" context="" type="1" thread="3108" file="ccmsetup.cpp:4342">
<![LOG[MSI log file:     ]LOG]!><time="09:45:07.061+240" date="12-06-2007" component="ccmsetup" context="" type="1" thread="3108" file="ccmsetup.cpp:4343">
<![LOG[MSI properties:    INSTALL="ALL" SMSSITECODE="PHX" CCMHTTPPORT="80" CCMHTTPSPORT="443" CCMHTTPSSTATE="0" FSP="HFXDBSSOM.CORP.EASTLINK.CA" CCMFIRSTCERT="0"]LOG]!><time="09:45:07.061+240" date="12-06-2007" component="ccmsetup" context="" type="1" thread="3108" file="ccmsetup.cpp:4344">
<![LOG[Source List:]LOG]!><time="09:45:07.061+240" date="12-06-2007" component="ccmsetup" context="" type="1" thread="3108" file="ccmsetup.cpp:4352">
<![LOG[                  \\HFXDBSSOM.corp.eastlink.ca\SMSClient]LOG]!><time="09:45:07.061+240" date="12-06-2007" component="ccmsetup" context="" type="1" thread="3108" file="ccmsetup.cpp:4359">
<![LOG[                  \\HFXDBSSOM\SMSClient]LOG]!><time="09:45:07.061+240" date="12-06-2007" component="ccmsetup" context="" type="1" thread="3108" file="ccmsetup.cpp:4368">
<![LOG[MPs:]LOG]!><time="09:45:07.061+240" date="12-06-2007" component="ccmsetup" context="" type="1" thread="3108" file="ccmsetup.cpp:4371">
<![LOG[                  HFXDBSSOM.corp.eastlink.ca]LOG]!><time="09:45:07.061+240" date="12-06-2007" component="ccmsetup" context="" type="1" thread="3108" file="ccmsetup.cpp:4386">
<![LOG[Updated security on object C:\WINDOWS\system32\ccmsetup\.]LOG]!><time="09:45:07.076+240" date="12-06-2007" component="ccmsetup" context="" type="0" thread="3108" file="ccmsetup.cpp:8692">
<![LOG[Sending Fallback Status Point message, STATEID='100'.]LOG]!><time="09:45:07.076+240" date="12-06-2007" component="ccmsetup" context="" type="1" thread="3108" file="ccmsetup.cpp:9169">
<![LOG[State message with TopicType 800 and TopicId {A450B407-619B-4777-B77E-C3352753B58A} has been sent to the FSP]LOG]!><time="09:45:07.326+240" date="12-06-2007" component="FSPStateMessage" context="" type="1" thread="3108" file="fsputillib.cpp:730">
<![LOG[Running as user "SYSTEM"]LOG]!><time="09:45:07.326+240" date="12-06-2007" component="ccmsetup" context="" type="1" thread="2600" file="ccmsetup.cpp:2534">
<![LOG[Detected 24292 MB free disk space on system drive.]LOG]!><time="09:45:07.326+240" date="12-06-2007" component="ccmsetup" context="" type="1" thread="2600" file="ccmsetup.cpp:465">
<![LOG[DetectWindowsEmbeddedFBWF() Detecting OS Version]LOG]!><time="09:45:07.342+240" date="12-06-2007" component="ccmsetup" context="" type="1" thread="2600" file="ccmsetup.cpp:511">
<![LOG[Client OS is not Windows XP Embedded]LOG]!><time="09:45:07.342+240" date="12-06-2007" component="ccmsetup" context="" type="1" thread="2600" file="ccmsetup.cpp:548">
<![LOG[Successfully ran BITS check.]LOG]!><time="09:45:08.745+240" date="12-06-2007" component="ccmsetup" context="" type="1" thread="2600" file="ccmsetup.cpp:6948">
<![LOG[Failed to successfully complete HTTP request. (StatusCode at WinHttpQueryHeaders: 401)]LOG]!><time="09:45:08.745+240" date="12-06-2007" component="ccmsetup" context="" type="3" thread="2600" file="ccmsetup.cpp:5813">
<![LOG[Sending Fallback Status Point message, STATEID='308'.]LOG]!><time="09:45:08.760+240" date="12-06-2007" component="ccmsetup" context="" type="1" thread="2600" file="ccmsetup.cpp:9169">
<![LOG[State message with TopicType 800 and TopicId {3BFABF82-FB74-43FB-8A4A-6DFDEAEAC25C} has been sent to the FSP]LOG]!><time="09:45:08.776+240" date="12-06-2007" component="FSPStateMessage" context="" type="1" thread="2600" file="fsputillib.cpp:730">
==============================================================
There are two red errors I am concerned about:
"Failed to successfully complete HTTP request. (StatusCode at WinHttpQueryHeaders: 401)
and
"Failed to download 'WindwosXP-KB923845-x86-ENU.exe' from http://HFXDBSSOM.corp.eastlink.ca/CCM_Client/i386/BITS25 with error code 0x80004005).
What should I do to resolve these errors?
Thanks,
Peter

What's the WMI class name to get Client Approval status

What's the WMI class name to get Client Approval status.
Unfortunately the below example with class "SMS_R_System" does not have the approval status
Get-WmiObject -Namespace "root\sms\site_LAB" -Class SMS_R_System | fl *
I listed all the available classes and... yeah It's going to take along time to go though all the possibilities.
Note: I'm running this in powershell on the primary first
If anyone knows it... I'd appreciate your help

This is all still in the testing phase so I'm not sure this is the best solution... but here's my problem and idea to resolve it.
Currently in our environment OSD can only be run against unknown computers and approved clients.
I currently automatically approve all clients in a trusted domain. So all systems that succeed OSD and auto join the domain are approved and I can always run OSD against those machines in the future.
Problem is with the systems that fail OSD for any reason and therefore do not automatically join the domain. They end up getting a SCCM record by the name of "Unknown" and therefore cannot run OSD again until the "Unknown" record
is deleted. "Unknown" records happen too frequently to manually delete and I'm not too comfortable with just deleting ALL of them on a scheduled basis.
Additionally there are way too many OU's in my environment to automatically join our OSD'd systems to the domain. So I have a script that checks using a prestart command to see if the system is already in AD, and if so then OSD continues and simply
joins the machine to the domain in it's current OU. If not the tech is given a nasty error message telling them to add the computer object in AD in the proper OU first.
I intend to check , with a Prestart Command if the current system already has a record in SCCM and delete it if found AND is not approved yet. This should resolve the "There are no task sequences available" error I get with
systems that have an "Unknown" SCCM record.
In this way the system will be essentially approved if the system was already prestaged in AD manually by a technician and any "unknown" record for that system will simply be deleted at the point of OSD.
Note: Although I can easily use the new SCCM Powershell cmdlettts and get the "Approved" status, I need to do all of this in WinPE without the cmdletts. If this property is not available via WMI, then I'm guessing this will not work.

SCCM Right Click tools , cannot connect to the WMI namespace

Hi All,
I think you all know the right click tools for SCCM, there's a strange problem at my SCCM environment, when I use right click tool to push user policy it said "cannot connect to the WMI namespace on PC01.." , but other
policy like machine it works fine. If I manually initiate from PC01 it works also.
Already uninstall and install the right click tools, restart the server, but still no luck, any ideas ?
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread.

Remote user policy request; I don't use the right-click tools, so I don't know what the code inside looks like. But from past experience, getting the remote user policy refresh to work right was tricky.
First question though: do you actually need to remote user policy refresh? Do you currently deploy advertisements to collections, where the collection membership is either a bunch of usernames, or is a single entry of a domain usergroup? If you
don't currently deploy to users or users in a usergroup, you really don't need to trigger a remote user policy refresh. There's nothing to find anyway, from the client to the management point.
If you do deploy to users or users in a usergroup; you might want to get a copy of Roger Zanders' Client Center, and see if that remote trigger for user policy works.
Standardize. Simplify. Automate.

Script to install the SCCM client remotely

Hi everyone,
My customer wants me to realize a script that reads
from a computers.txt list containing all the company computers and that do the following steps:
1. Verify that the sccm client is not installed
2. If not present, install remotely the client
3. Verify that the WMI stack is healthy
Any help will be appreciate :-)
Thank you

If you're looking for a startup script Jason Sandys has written the best one
http://blog.configmgrftw.com/configmgr-client-startup-script/
As for reading the computers from a text file, that's ridiculous. You will find that nobody has ever done that. ConfigMgr is designed to manage tens (and hundreds) of thousands of devices in the simplest way possible. Compiling and maintaining a text file
of computer names is high maintenance and quite frankly crazy.
Gerry Hampson | Blog:
www.gerryhampsoncm.blogspot.ie | LinkedIn:
Gerry Hampson | Twitter:
@gerryhampson

Why the sapscript called as client dependent? y smartform not?

why the sapscript called as client dependent? y smartform not?

Few more reasons why....? Please read below:
SAPscript technology is based on a mainframe product from the 1980s,
while Smart Forms have only been around since (roughly) 2001. With that sort of time gap,
there are bound to be significant differences between the two tools. As you have noted correctly, client dependence is a fundamental one.
Although SAPscript has had some incremental improvements over time,
its forms have always been -- under the hood -- relatively passive objects, with minimal embedded logic.
These forms were designed to be driven and controlled by ABAP programs,
much in the way ABAP programs read in database tables to produce reports;
if you ever download a SAPscript form (e.g., via utility program RSTXSCRP),
and look at the portable text file it produces you'll see what I mean.
Many text objects (e.g., invoice header texts) are bound directly to documents which are client-dependent, so it makes sense for these text objects to also be client-dependent. From a complexity standpoint, SAPscript forms are close enough to these text objects where I can see how it made sense at the time to make them client-dependent too.
Conversely, a Smart Form is significantly more robust and complex. For instance, it can contain program nodes and nested tables with patterns. When a Smart Form is compiled, it generates an ABAP function module and these are always client-independent. This is appropriate, given that this form has more in common with an ABAP program than its predecessor. For instance, when a print program calls a Smart Form, the form itself takes over to produce output, without any further direction from the print program. In fact, the join is so seamless that I often find myself using a Smart Form's Initialization section for logic to handle any data gathering not handled by the print program. I would never even think to attempt this with SAPscript.
Several factors figured into SAP's decision to make Smart Forms client-independent, including customer feedback. There are significant advantages to client-independence. For instance, a change made in one development client happens immediately across all development clients. Among other things, this means we don't have to waste time figuring which client contains the most recent version -- they all do! In addition, transporting Smart Forms is easier, since we can safely bundle them together in the same transport as their client-independent print programs (no worry about mixing client-dependent and independent objects).
Thanks,
Santosh

Why does apple tv always connect to itunes even when I own the movie and it is on my computer?

So I have my entire itunes library on a HD that I bring with my laptop back and forth. My problem is not at my house where I have an internet connection, but it is at my cabin in the woods where I do not have an internet connection. Why is my apple tv always trying to connect to the itunes store whenever the movie I am trying to play is on my computer and on the network? I have an airport express setup creating my network, but like I said I do not have an internet connection. I am just using the AX to give me a wifi network. It is constantly looking for the itunes store. Is there a way to bypass this, or is this a Apple security feature? Thanks

I understand that point. They are mostly bought from iTunes. But, I can watch on my laptop, iPad, iPhone on an airplane or wherever without an Internet connection. So why the hang up on my apple tv, should it not just be an extension of my laptop?

SCCM client uninstall from the SCCM console

Hi All,
Would it be possible to uninstall the SCCM client already installed on a workstation via the SCCM console?
Or the only method would be via ccmsetup /uninstall ?
Thanks.

Hi,
You cannot uninstall the client from the console "out of the box". But if you modify the console you can add the feature. You can get the feature from the right click tools - http://www.myitforum.com/myITWiki/SCCMTools.ashx or from the Config Mgr Client Center - http://sourceforge.net/projects/smsclictr
Kent Agerlund

Command line to run the SCCM client installation

SCCM Client package have been distributed to all servers. It will be available in \\servername\smspkgf$\GS2002B2
Do we need a command line to run the SCCM client installation manually?

More info:
About Client Installation Properties in Configuration Manager
http://technet.microsoft.com/en-us/library/gg699356.aspx
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

What is the process that SCCM clients access content from Distribution Points?

I already know that the (Network Access Account) NAA is one method, and that it also has to have the
Access this computer from the net network right configured on the Distribution Point (Default server settings allow this). I am trying to understand what happens when the connection to the Distribution Point fails when using the NAA. Does the
client use the computer account (computername$) of the SCCM client or is the SCCM Site Server account (SCCMSiteServer$) instead. After reading
this and
this, I am not sure now. Hopefully someone can help clear this up.
--Tony

The first link also states: When Configuration Manager tries to use the computername$
account to download the content and it fails, it automatically tries the Network Access Account again, even if it has previously tried and failed.
The way this reads to me is that the Network Access Account is first attempted since it is tried again after the computername$ is
attempted. Peter, I am I just misunderstanding what it is trying to say? Also, is computername$ referring to the client machine and not
the SCCM site server? Is the SCCM site server ever used which is referenced in Gerry's blog?
Just to make sure I completely understand the process goes:
Local Computer account (ComputerName$)
Network Access Account (NAA)
No use of SCCM Site Server\s
--Tony

Why the SCCM client always corrupts the WMI repository?

Similar Messages

Maybe you are looking for