Why to replicate the data for GTS? (we are on the same client)

Hi Folks,
We have a GTS installed on the same machine as ERP, so GTS and SAP ERP are on the same client.
As I understand the implementation guide we have to transfer all the master data like vendor/clients to GTS.
That would mean we replicate all the vendors and clients.
What is the sense of that? Why do we have to replicate all the data, We are on the same client?
Does GTS cannot use the normal vendor master?
Thx for help
Dieter

Hi,
GTS has its own Database for Business Partners and Material Master, that is why you have to transfer it, even if its on the same client.
For Developpement you can have both on one machine, but for Testing and aspecially for Production SAP recommends to have 2 seperate machines. This for 2 Reasons:
1. GTS Runs some jobs (depending on what you implemented) that are very CPU consuming and you take the risk of putting your CPU to 100%
2. But more important, you will have to patch up GTS many times to cope with new legal regulations, if you have it on the Same machine you have to touch the ERP, wich most companies do not want...
Regards,
Marc

Similar Messages

Calls listing, why repetition of the same contact for each call ?

Calls listing, why repetition of the same contact for each call ?

jasonnPOS,
you seam to have had the exat same problem I am having now. Have you solved it?
The link you send in your post :
http://support.apple.com/kb/TS2326
As I think you already noticed doesn't solve the problem it merly duplicates the numbers in each contact. One with +and country code and one without that...
There has to be another solution...

HR Authorisation Management for different companies in the same client

Hi,
Could anyone please help in this....
My client has two companies. They want to restrict the authorisation to both the companies so that no one can see each other companies data and at the same time access tha data.
For Eg, there are two payroll officers, each in both the companies, If i give authorisation to run Payroll driver(PC00_M40_CALC), anyone of them can run payroll for any of the companies. (though,their Payroll area is different). There are many restrictions to be maintained like Maintance of Master data, Maintanance of OM structure as assignement of position, running Payroll, viewing the payslip etc...
How can this all be restricted so that, the respective companies can view and access their own data without interfering in to the other company.
I could only find object P_PYEVRUN which helps me restrict to view the created documents of posting for other company code.
Can anyone put light on how i should proceed further... I heard we can restrict HR master data, but what all i know is we can restrict at infotype level. My problem is, two persons should access PA30(each from different companies), but should not be able to edit other companies data.
Thanks
--Pranitha

Hi ,
If you are creating the another company undar the same client . then you can not use different no. range.
or if you are going different client for different compnay code then you can use different number range for material master.
SAM

Extract data of a company within the same client.

Hi gurus. If I have more than one company configured in the same client in the ERP, Is there any way to extract data of only one of those companys in order to transfer or copy this information in other ERP?.
I've listened about TDMS but I'm looking for any procedure or tool that ensure that only the data of one company of multiples is extracted.
Thanks a lot!. Greetings from Colombia.

Hi,
Could you please clarify what all data you want to extract. Is it master data ?
Incase you want to extract master data to any external system you can you SAP standard IDOCs using ALE.
Also you can put a filter in the distribution model to filter the extract data only to relvant company codes.
Thanks
Neel

How to upload data from flat to ztables with in the same client by idocs

Hi Experts,
I have a requirement in IDOCS, I need to create a custom IDOC .I am working on IDES 4.6c. The reqirement is , there are ztables with header and item data. say for example Authors and Books. I need to upload data from flat file which is available in presentation server of the same client, which will updated in ztables by using idocs. For this i need to do ale settings also. The client is 800. There is no other client available. With in the same client i need to do the above stuff.
For this requirement how to approach (step by step) to accomplish.
Thanks in Advance.
Regards
J.S.Varma

Hi,
This is the procedure.
create segments using we31. don't forget to relaese it
create idoc using above segments using we30 don't forget to relaese it
create message type using we81
create function module to upload data using se37
maintain process code using we42
create partner profiles we20.
In the fm module itself write the code for downloading the data from presentation server by GUI_DOWNLOAD.
Then update the database tables directly by insrt through other internal table in the same client itself.
Thanks
Manju

EWA" Dates for this session are overdue "

Dear All,
Im now configuring EWA report but i always got Red Flag for the satillite system said that "Dates for this session are overdue" and there is no two bottle apear. please help me..
Thanks so much.

Hi,
That error is because your managed system is not sending the required EWA data to your SolMan for processing.
Please check the following to make sure all steps are correct for EWA processing:
Check RFCs in Solution Manager to your system that the EWA is for.
Also check the Back RFC to SolMan in the managed system.
Also check in the managed system, transaction SDCCN and make sure the maintenance package is running and scheduled periodically!
Finally ensure the Task Processor is active and scheduled in SolMan via transaction SDCCN > Goto > Settings > Task Processor.
Lastly check in the managed system that the RFC for the maintenance package is set to your SolMan via transaction SDCCN > Goto > Settings > Task Specific > icon next to RFC Destinations > Settings. Ensure the Back RFC to SolMan is set as the master.
To do this, go to SMSY in SolMan > Environment > SolMan Operations > Administration SDCCN and ensure your managed system is there and SolMan is the master.
You may even have outstanding jobs for this system in SDCCN of SolMan which you can run to process the EWA data if you do not have a periodic Maintenance Package correctly running in SolMan.
All of these checks will solve your issue and make sure EWA is working.
If you find the answer, please post what the mistake was, I am curious
Regards,
-Rohan
Edited by: Rohan Parikh on Dec 9, 2009 4:42 PM

How to create a cube/ods/infoobjects etc..and also why to create the same

Dear Friends
how to create a cube/ods/infoobjects etc..and also why to create the same objects.
thanks & Regards
Ramana

Hi Friend,
Creating Infoobjects
1. Go to RSA1 -> Modelling tab.
2. Click on Infobjects.
3. Create a new Infoarea.
4. Now create Infoobject Catalog for Characterstics and Key Figures.
5. Now create Char Infoobject under Char Catalog and Key figure Infoobject under Key Figure catalog.
Creating Cubes:
1. Right click the info area and choose create info cube.
2. Select the type of cube you wish to create and comnfirm your selections.
3. The next screen is where you actually define the cube.
4. Now you will notice the difference.
5. Place your cursur on key fig and right click and chose infio object direct input; chose your key fig for the cube.
6. Similarly for the dimension; right click the dimension and chose inbfo object direct input, chose your chars and out them in dimension.
7. Activate the cube.
Creating a ODS is also the same.(in step 1 choose create ODS)
Creating Multicube/Multiprovider
1. Right click the info area - chose create multi provider.
2. select the cubes , DSOs, info objects that you need for the multi provider.
3. On the right side of the screen, you will see all the objects that you selected and open the key fig and dimension and drag the ones you need to define the multi provider.
4. Identify the chars and key figs.
5. Acvitate the mullti provider.
Why we create them ?
Infobjects : They are fields in R/3. As we require fields in R/3 tables we require infoobjects in BI.
ODS : This actually is like a table in R/3.
Cube : This contain the Key figures.(e.g Sales quantity, Amount etc)
Hope it helps.
Regards
Hemant Khemani

How to replicate the same bookmarks on a new/recurring report?

Hi, I am using Acrobat Pro 9.
I need to generate a new report every month with the same number of pages and bookmark destinations. Is there a way to "copy" or replicate the same bookmarks I have created in this month's report to any new subsequent ones?
Thanks in advance!
GC

Try using 'Replace Pages'.
Be well...

Can v use the same Client for setting the ALE ??

Can i use the same client like 080 for my ALE configuaration ?

Configuring is a Cross-Client(Client Independent) activity.
Check whether you have necessary access/authorizations to Configure.
This should be always done in Development client.
Hope this helps.
Regards
Vinayak

MM-SUS and EBP-SUS in the same client

Hi experts
I have a doubt about implementationMM-SUS and EBP-SUS in the same client, If I send a PO from MM to SUS and after send a PO from EBP to SUS to the same vendor, the vendor will be able to see 2 POs with just one logon?
As I know when I replicate a vendor from MM to SUS a Business partner is created and when I replicate a the same vendor from EBP to SUS a new Business partner is created and are diferent BP so a user and pass diferent .
Thanks
Nilson

Hi Nilson,
If i understand your scenario, you'll replicate an existing R/3 vendor to EBP. The vendor will be a direct vendor in R/3 while the same would be used as for Indirects in EBP.
Well, when you replicate the R/3 vendor to EBP, the vendor has the R/3 link in the form of Backend Logical systen name in EBP.
So when you replicate the vendor from R/3 or EBP, there will be ideally only one entry for the vendor with references to R/3 and EBP systems.
Hope this clarifies your question.
Cheers,
Akash

Cant login multiple network accounts on the same client?

Setup:
I have created a simple Lion Server on a new i7 Mac Mini. I have configured Open Directory in Master mode and have setup 4 user accounts. I have enabled the File Sharing service and checked the "Make available for home directories" option on the "Users" file share. I have configured each of the 4 user accounts to use this location as the home folder. I have connected my client machines (all OSX Lion) to the Network Account Server.
Problem:
I can log one user into the client machine, but when using "Fast User Switching" and logging on as the second user I get the following error:
"You are unable to log in to the user account "guestaccount" at this time. Loggin to the account failed because an error occured"
In the console if I search for that user account the related error message is:
11-07-31 12:30:54.993 PM authorizationhost: ERROR | -[HomeDirMounter mountNetworkHomeWithURL:attributes:dirPath:username:] | PremountHomeDirectoryWithAuthentication( url=afp://inntaserver01.local/Users, homedir=/Network/Servers/inntaserver01.local/Users/guestaccount, name=guestaccount ) returned 16
Any thoughts as to why the Home Folder "mounter" failed in this scenario?

Historically you have never been allowed to use Fast User Switching to log in multiple network logins on the same client machine. This certainly applied with Tiger, Leopard, and Snow Leopard. I have not yet personally tried this with Lion.
I believe that the underlying reason for this not being allowed is down to how AFP volumes are mounted. The AFP mount becomes 'owned' by the user that triggers the login. With a network login the first user becomes the owner and this means subsequent attempted network logins are denied access to that share and hence cannot access their home directories.
With Tiger, Leopard, and Snow Leopard servers, one could configure network home directories to be shared via NFS instead of AFP. NFS gets treated a lot different in terms of mounting, and is done more at a system level than a user level. While again I have not personally tried Fast User Switching with NFS shared home directories, this approach is specifically recommended by the authors of AquaConnect (a Macintosh Terminal Server solution) in order to allow multiple logins on the same Terminal Server. This seems to be for the same underlying reason. Using NFS does certainly work for use with AquaConnect and also works for the competing iRAPP Terminal Server product as well.
Unfortunately, Lion Server while it can be made to run an NFS server, will not let you configure using NFS for sharing home directories. I have actually reported this as a 'bug' in Lion server.
Neither the authors of AquaConnect or iRAPP have actually tested this scenario with Lion server yet, but AquaConnect do plan to investigate it. It could make it considerably more difficult to use their products.
So in summary, using NFS to share network home directories in theory would avoid the problem and can be done with a Tiger/Leopard/Snow Leopard server, but cannot be done with a Lion server. It is possible however to mix Lion with older server versions. This might for some people be a possible workaround.
PS. A bonus side-effect of using NFS shared home directories was that this allowed badly written software like Adobe's applications which are otherwise notorious for having major issues with network logins and home directories to work without errors. As an example Adobe Acrobat Pro introduced a bug in version 7.0 which prevented it being able to print-to-PDF (one of the major reasons to buy Acrobat Pro). It tooks two years for them to eventually fix this in Acrobat Pro 8.1 (I know because I spent that two years nagging them to fix it and was a beta tester). Unfortunately they then reintroduced the bug in Acrobat Pro 9.0. Fortunately I discovered this side-effect got round the issue although a clunkier workaround was also possible for Snow Leopard clients by redirecting certain folder paths.

Connect 2 BW to the same client in R3?

Hi,
Is it possible to connect 2 BW to the same client of R/3 as a source system? Will this mess up the delta queue like in RSA7? Or, the R3 system has separate queue for each BW? Please advise.
Thanks,
Jeff

Hello Roberto,
Could you please give me the step to step procedure of doing it? I really appreciate your help and full points will be awarded
Experts,
I have two BW clients with same naming convention (BWP400).. Can I connect 2 BW systems with same logical name to one R/3 system. If not how can I change the logical name of one of the system with out affecting any data or settings it .
One of the prod box is new one and yet to load data.
All inputs are highly appreciated
Thanks and Regards,
Harish

Can assign some Enhancement Framework to the same client????

Hello experts, I would like to know that it is possible have some Enhancement Set Framework to the same client.
In transaction sm30 with table "BSPWDV_EHSET_ASG" .I would like to assig different Enhancement Set to the same Client. It is possible?? I think that this is not possible because when I try to assing more than one Enhancement set for the same client. The second is not save in table "BSPWDV_EHSET_ASG".
Thanks in advance.
Regards

Hi Javier,
You are right, we can't have more than one enhancement set per client.If you want to maintain different enhancement sets based on logged in user or some business role, you can implement a BADI-COMPONENT_LOADING with interface IF_BSP_WD_CMP_LOADING_BADI and do something like this inside the method GET_ACTIVE_ENHANCEMENT_SET:
data: LS_USER_ROLE type STRING.
data: LS_ASSIGMENT type STRING.
data: LR_PROFILE_INSTANCE type ref to
IF_CRM_UI_PROFILE.
LR_PROFILE_INSTANCE = CL_CRM_UI_PROFILE=>GET_INSTANCE( ).
LR_PROFILE_INSTANCE->GET_PROFILE( receiving RV_RESULT = LS_USER_ROLE ).
if LS_USER_ROLE = 'SALESPRO'.
      RV_RESULT = 'YOUR ENHANCEMENT SET'.
    else.
      if CL_BSP_WD_ENHANCEMENT_API=>INHOUSE_USE = ABAP_FALSE.
        data: LS_DEF_ASSIGMENT type BSPWD_EHSET_ASGN.
        select single * from BSPWD_EHSET_ASGN into LS_DEF_ASSIGMENT where CLIENT = SY-MANDT.
        if SY-SUBRC = 0.
          RV_RESULT = LS_DEF_ASSIGMENT-ENHANCEMENT_SET.
        endif.
      endif.
Hope this helps!
Thanks and Regards,
Rohit

IDOC sender reciever as the same client !

Hi,
If I am using the same client as the sender and the receiver then shall i create the segment types and idoc types
and ztable again in the same client......?
Can i use same configuaration created for the rfc in SM59 for both sender and receiver ?
Please give me idea regarding this when it is to create the idoc with in one client... thnks

Hi,
Check this document for your reference:
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/d4ce58df-0901-0010-a4be-9ae9eda61107
cheers
Aveek

SLD: Pointing two business systems to the same client...

Hi Guys,
Is there anyway to make two business systems point to the same client(on the same r/3 technical system)? how about a work around?
Thanks,
Harsh

Harsh,
>>Finally all collapse to one client in production.
Even though you will have multiple Business Systems in every envrionment, the final transport will happen from only one environment.
DEV --> QA --> PROD. In this case, objects are moved from dev to qa and then from QA to prod and so, all you will need is the trasnport target created in the QA business systems pointing to the Prod busines system and do the transport.
>While transporting to a new SLD(quality to prod) can I choose one transport target for multiple source business systems?
Take a look at this document for multiple SLD transports. Should answer all doubts,
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/9e76e511-0d01-0010-5c9d-9f768d644808
Regards,
Bhavesh

Why to replicate the data for GTS? (we are on the same client)

Similar Messages

Maybe you are looking for