WI_ID parameter in Application Parameter in webdynpro component using class

Hi All,
I want to use WI_ID parameter in Application Parameter in my webdynpro component.
And i am using class instead of BOR.
I used this with BOR earlier, but can any one let me know that how to do the same if i am using class.
Currently i created one parameter as WI_ID in my application parameter, and try to read that in my HANDLEDEFAULT method of windows, i created importing parameter as WI_ID also in HANDLEDEFAULT method.
but still not getting any value in this parameter.
How to set this parameter.
Thanks,
Amar.

Hi,
What is actually your question? Are you trying to get the WD application to work with UWL?
If this is the case, then just make sure first that the wd application parameter works without the UWL. This should work just like you are doing - importing parameters of the handle default method. Make sure that the parameter works. Test it with launching the WD application with browser <application_url>&wd_id=12345. If you are not getting this working, u should ask it from the WDA forum.
Then if the question is about how to configure the parameter with UWL, you need to configure it a bit differently with BOR. But maybe you should post your XML here to see what is wrong.
Regards,
Karri

Similar Messages

Parameter Passing from UWL to WebDynpro Component

Hi Everyone,
I m having a small problem in parameter passing from the UWL to the Webdynpro component(EP6 SP16).
The UWL shows a list of shopping carts and I ve configured it such that the Shopping carts open in the webdynpro application. Now the requirement is that I want to pass the shopping cart number from the workitem container and retrieve it in the webdynpro component.
The only thing that i m able to retrieve is the work-item ID. I ve followed the documentation on help.sap.com but I m not able to figure out how to move ahead with this.The code which i m using to retrive the dynamic parameter is
String text = WDWebContextAdapter.getWebContextAdapter().getRequestParameter("DynamicParameter");
Can somebody please help me with this..
Regards,
Prathamesh

Have you looked at this weblog by Ginger Gatling?
Create new UI's for existing workflow tasks with ABAP Web Dynpro and Universal Worklist!
Hope this helps.
Sudha

Use of multiple Applications for single webdynpro component in ABAP WEB DYNPRO

I am working on a object which have multiple webdynpro applications for single webdynnpro component.How to assign a different functionality to each application bcoz when we right click on webdynnpro component and select create webdynpro applications ,it just creates a application how so we assign diff functionality to each of them .Also in the parameter tab of the webdynpro applications ,there is a diff config id mentioned for each application.what is its relavance

Hi Sam,
Different functionalities for a single webdynpro component can be achieved by many ways. Among them is the use of multiple applications. Say for example if you want different views/windows to be displayed at the start up, you can achieve it by specifying at the default window, for each every webdynpro application.
And if you want control the fields, say for example you want to display input fields as editable for one application and read only for other application, you can achieve it through application parameters. Based on parameters, in HANDLEDEFAULT method of window controller , you can specify the type of behaviour , whether it has to editable or not based on parameters and same can be used at context binding of UI properties.
Application configuration can be used for personalization.Web Dynpro ABAP Application Configuration. This tutorial would help you understanding the concept much better. There can be multiple application configurations for a single application.
Regards,
Harsha

Calling a potal application method in webdynpro component(class)

Hi All,
I have a requirement where i need to call a method created in a portal application(.par) in a webdynpro component.
Any Pointers??
Regards
Radhika Kuthiala

hi radhika,
You need to create a portal service to call that method from webdynpro.
I am providing u a url, hope it will help you.
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/b0446f5c-fcb9-2910-e082-88becbe3ddc9
Regards,
Ravi Shankar

Error Parameter WI_ID contains an invalid value in webdynpro abap

Hi Experts,
i am working with webdynpro abap and using work flow in my component , here i am getting error and the error is
Parameter WI_ID contains an invalid value .
its showing the error in windows parameter : wi_id and the wi_id is type sww_wiid
and the same parameter i am using in application parameter .
can u suggest me how to use this parameter wi_id in window parameter and application parameter and what the type should be for wi_id parameter.and what the value should be for application parameter wi_id.
her i am giving the complete error details.
please give me the requried information if u porvided screen that will be very useful
The following error text was processed in the system RD1 : Parameter WI_ID contains an invalid value .
The error occurred on the application server S0164SAPDEV2_RD1_00 and in the work process 0 .
The termination type was: RABAX_STATE
The ABAP call stack was:
Method: HANDLESTART of program /1BCWDY/BP6P95H8W6B71I7VVRPR==CP
Method: IF_WDR_VIEW_DELEGATE~WD_INVOKE_EVENT_HANDLER of program /1BCWDY/BP6P95H8W6B71I7VVRPR==CP
Method: INVOKE_EVENTHANDLER of program CL_WDR_DELEGATING_IF_VIEW=====CP
Method: DISPLAY_TOPLEVEL_COMPONENT of program CL_WDR_CLIENT_COMPONENT=======CP
Method: INIT of program CL_WDR_CLIENT_APPLICATION=====CP
Method: IF_WDR_RUNTIME~CREATE of program CL_WDR_MAIN_TASK==============CP
Method: HANDLE_REQUEST of program CL_WDR_CLIENT_ABSTRACT_HTTP===CP
Method: IF_HTTP_EXTENSION~HANDLE_REQUEST of program CL_WDR_MAIN_TASK==============CP
Method: EXECUTE_REQUEST_FROM_MEMORY of program CL_HTTP_SERVER================CP
Function: HTTP_DISPATCH_REQUEST of program SAPLHTTP_RUNTIME
Thanks & Regards.
khanna

Hi Nawal Kishor Mittal,
thanks for the reply,
i have given the application parameter wi_id with type string also but in 120 client (development) is working fine. when i test in 130 client( testing) its going to dump.
what should be given to application value i given parameter wi_id and what the value should be there.
waiting for reply.
Thanks & Regards.
Khanna.

How to set application parameter in web dynpro abap?

Hi experts,
Is there any way we can set up our own application parameter (for ex. mode ) of our application. And based on that parameter we can visible/invisible certain elements of view . so by having only one webdypro application component, and making multiple applications and assigning paramter to each , we can make our application userfriendly.
Thanks,
Saurin Shah.

Hi Saurin,
For this you will have to use the concept of Component and Application Configuration in WebDynpro. Go through [this tutorial|https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/b52e13c3-0901-0010-8fa6-d11a51821b7c] to get an idea of how you can go ahead to meet your requirements.
Regards,
Uday

Multiple webdynpro applications for single webdynnpro component

I am working on a object which have multiple webdynpro applications for single webdynnpro component.How to assign a different functionality to each application bcoz when we right click on webdynnpro component and select create webdynpro applications ,it just creates a application how so we assign diff functionality to each of them .Also in the parameter tab of the webdynpro applications ,there is a diff config id mentioned for each application.what is its relavance .
Rgds,
Praveen

Hi Saravanan,
I need to modify it from the portal end, not at the application level.
I need some configuration steps which specifies how to modify the Detail Navigation in PPM. Using SPRO we can do some configuration, i wanted to know whether its possible from portal end as well.
Regards
Shivas Bhan

Possible to get application parameter in value help

Hello colleagues,
we developed a value help for business partner to use it in an wda-component . in this value help only those business partner should get supplied where the user has a relationship to . to make it really difficult we can not use the backend user (crm) but the portal user . in the component which uses the value help we achieve to get the user via application parameter from the containing iview but as soon as the user calls the value help this context is lost and we can no longer use the application parameter (which is in fact "out" of the iview) to retrieve the user of the application and therefore get a dump.
Is there a possibility who to get application parameter of a component in a value help called by this component ?
Thanks in advance
Michael

Hi,
PLease refer to this link
http://help.sap.com/saphelp_nw70/helpdata/en/88/266a3e54a2e946e10000000a114084/frameset.htm
You can enter parameter values for certain screen fields for displaying a SAP transaction here.
This field is optional.
The parameter values are specified with the following syntax:
<Screen_field1>=<Parameter1>
&<Screen_field2>=<Parameter2>
Thanks
Pankaj

How to define the application parameter 'sap.xss.BaseConfigurationID'

Hello All,
I am developing a webdynpro ESS custom self service application. I have completed the development of the DC. But at the end when I am creating the application for the DC, I am not able to figure it out how to define the application parameter 'sap.xss.BaseConfigurationID' for the application. I have defined remaining all the parameters as specified in the following link.
[http://help.sap.com/erp2005_ehp_03/helpdata/EN/43/3b95dab4ab1800e10000000a1553f6/content.htm]
Could any one please detail the process to define the parameter 'sap.xss.BaseConfigurationID' ?
Thanks a lot.
Regards,
Seshu.

Pick a representative file.
Get info. (Command-i)
There you will see a place "Open with" where you can select the application for that file.
Hit the "Change all..." button to do this for all files of this type.
charlie

Application parameter to be passed to view

Hi, in ECC6.0 I've created an application that has a parameter. This parameter is passed to a window which is unique to the application. The window has only 1 imbedded view. So now the problem. The window receives the parameter correctly from the application. However, the view does not receive the parameter from the window. I've tried creating plugs with parameters and linking them but this doesn't seem to work, the main reason being that no plugs are fired as there is only one view in the window. So how do I receive the parameter from the window into the view? I need to use the passed parameter in the WDDOINIT method of the view, so please don't suggest placing it in the context.
Thanks much,
Kevin

Hi Baskaran, this looks good, like exactly what I want but it still isn't working. I created a global public variable in the attribute tab of the component(i.e. gv_my_global_variable ). I set the global component variable in the HANDLEDEFAULT method of the window. I checked with a breakpoint and the parameter is being passed to the global component variable:
wd_comp_controller->gv_my_global_variable = my_parameter.
I then try to read this variable in the WDDOINIT method of the default view
lv_my_local_variable = wd_comp_controller->gv_my_global_variable.
However, checking with a breakpoint is showing the gv_my_global_variable as blank.
Any ideas?
Thanks,
Kevin

Reading Application Parameter

Dear Experts
How can I read the application parameter that is avaliable in url in a webdynpro java application pleas help me out in this issue
Regards
Noel

Hi Noel,
You can use the following code to get parameters from an URL
IWDProtocolAdapter protocolAdapter = WDProtocolAdapter.getProtocolAdapter();
IWDRequest request = protocolAdapter.getRequestObject();
String paramValue1 = request.getParameter("urlparamname");
urlparamname is the name of parameter in the URL.
Thanks n Regards,
Jhansi Miryala

Error while passing Application Parameter in Transaction iView editor

Dear all
I am trying to pass some application parameters to one of the transaction iViews. Without passing any parameter in 'Application Parameters' field of the iView editor the iView can be previewed/displayed fine. But when I am trying to pass the parameters as follows <Screen_Parameter1>=<ABC>&<...>=<...> the preview is coming up with a Portal runtime error saying that the <Screen_Parameter1> is an invalid terminal property of the root context_
Can anybody help me out with this?
MAQ

In any application parameter field u need pass screen_field
u need to find the screen_field value first .
login to backend ECC server , give u r required Tcode .
click in required field , press f1 -> click on Technical setting icon on top .
in that screen , screen_field is the last field .
copy this screen_field value
place ths screen _field value in application parameter field .
example : rs38-programm=ztest
here re38-programm is the screen field
ztest is it's value .
& this is used for the separator between 2 values

Difference between component configuration and application configuration in webdynpro

what is the difference between component configuration and application configuration in webdynpro?

Hi Rohit,
With the component configuration, you can control the behavior of each individual component within a Web Dynpro application or the user interface of individual views. For each component, several records of configuration data can be created.
Using the application configuration, it is now possible to assign the configuration required in the current application to all the components used.
In short : Component Config belongs to WDP Component and Appl'n Config. belongs to WDP Appl'n.
Check this document for more information.
Web Dynpro for ABAP - Component and Application Configuration
Thanks
KH

IView Property: application parameter

Hello,
I have a question regarding the iView property "application parameter": how can I set several application parameters?
For example: first parameter useractionid=UAUSER; second parameter application=V01 - how can I seperate these parameters? with blank, with comma and blank or only comma, semicolon and blank or only semicolon, or anything else?
Thanks
Steffi Gründemann

Hi Steffi,
In the application URL, you can add the required parameters. First parameter followed by '?' question mark then '&' (only AND symbol). See the example below:
http://host:port/testApplication?useractionid=UAUSER&application=V01
Regards,
Satya
[Pls reward points if helpful]

Activating explanation function with application parameter

Hello,
I found in documentation that it's possible to activate explanation function (mouse over) with url parameter sap-explanation=X. Is it also possible to activate explanations with application parameter, application configuration or GLOBAL_SETTINGS?
Thanks and regards
Marc

I remember that JSF provides no support for accessing the indexed values as I right understand you.

WI_ID parameter in Application Parameter in webdynpro component using class

Similar Messages

Maybe you are looking for