Widget Browser Issues...

I am a student at SCAD and downloaded the Adobe Creative Suite from the school. I am trying to launch my widget browser but always get an error message. I also noticed that I was unable to access any adobe site no matter what browser I used.I am having to use my moms PC to write this question. I read some threads and some mentioned the "host" may be an issue? Am I unable to access any adobe site and use my widgets because I am using a downloaded version from my school?

Are you using the same network to connect your computer which your mom PC have?
If so, then the problem is associated with just your PC and the Firewall or the security software could be one of the reasons.
Turn off firewall and the anti-virus if you have any for an hour or so to check if they are the cause.
Refer to the documents below for further help.
http://helpx.adobe.com/x-productkb/policy-pricing/activation-deactivation-products.html
http://helpx.adobe.com/creative-suite/kb/troubleshoot-activation-problems-creative-suite.h tml
http://helpx.adobe.com/x-productkb/policy-pricing/activation-network-issues.html
Thanks
Bhawna

Similar Messages

Adobe Widget Browser does not complete downloads

Hi,
i run Adobe Creative Suite CS5 in German for Windows on a Windows Vista PC.
I switched off all antivirus and firewalls.
I logged on and off and on again to the Widget Browser (v. 1.0 Built 543) and Adobe Exchange web-site.
I checked various folders underneath appData.
The result is always the same: No widget download is completed. They all terminate with Error#2032.
Reading the forum does not give me any result.
i am grateful for all sort of help.

Hi,
Thanks for your report issue to adobe and I'm sorry you're having problems with widget browser. Unfortunately you've reached the AIR forums. Do you mind reposting this question over on the Dreamweaver widget browser forum?
Thanks,Qingyan

Accordion widget browser panel height

I am using the accordion widget browser and would like to shorten the height of the
panels - how can I do this...

I found the solution!
Sample of before: www.muohio.edu/lll/studyabroadweek/index2.html
Sampe of after: www.muohio.edu/lll/studyabroadweek.
The solution was at: http://docs.jquery.com/UI/Accordion#options but was a bit difficult for me to figure out how to implement it... after a bit of experiment - I got it!
In your .html document, at the beginning of the widget look for the code in black. Code in bold red is what was needed to solve the issue.
$(function(){
                // Accordion
                $("#jQueryUIAccordion").accordion({ header: "h3",
                                            animated: "slide",
                                            event: "click",
                                            collapsible : "false",
                                            autoHeight: false

Proxy Authentication while Installing Dreamweaver Widget Browser (Mac)

Hi,
I have created the Adobe CS6 Web and Design Premium package using AAMEE 3.0. I have chosen to exclude adobe air and help. Exception folders have Adobe AIR Installer , Adobe Dreamweaver Widget browser and Adobe Help. ExceptionInfo.txt provides the list of commands to install the exceptions. While running the commands from the text file, Adobe AIR and Adobe Help works fine but Dreamweaver widget prompts for proxy authentication inspite of -slient parameter.
I am using the below command from ExceptionInfo.txt to install Widget Browser
Adobe AIR Installer.app/Contents/MacOS/Adobe AIR Installer -silent -eulaAccepted -programMenu WidgetBrowser.air
Does this a common issue or do I need to change something in the command line?
Regards,
Karthikeyan M

Hi Karthikeyan
I haven't had the opportunity to confirm this with CS6 recently, but depending on the callback the air application makes, I have seen examples where using the -revocationCheck never command line flag could potentially make a difference. It would be interesting to see if it does under these specific circumstances with the widgetbrowser.
See http://blogs.adobe.com/simplicity/2011/08/disabling-air-certificate-revocation-checks-duri ng-silent-install.html and http://helpx.adobe.com/creative-suite/kb/creative-suite-deployment-proxy-log.html for some background.
Kind regards
Henk

Widget browser problems {subject edited and truncated by moderator}

I'm having problem with adobe widget browser. When I try to log in it freezes. I access dreamweaver through the adobe creative cloud. I have uninstall/reinstalled this program to fix this issue but it didn't work. Any advice?

There have been a ton of questions about this lately.
As far as I've heard (I never used it), the Widget Browser has been disabled.
The replacement is the Adobe Add-Ons section under Window > Browse Add Ons in DWCC 2014

Widget Browser kaput

OK, I've looked around for answers and the ones I found don't address my situation.
I installed the Adobe Widget Browser and it doesn't work. That means the stan-alone application launches but there's no app window.
I cannot sign in, there's nothing but the application menus.
Dreamweaver keeps telling me it's not installed and sends me to the website to get it installed.
I updated AIR (to 2.7.0.19480), uninstalled, reinstalled AWB and nothing (installed from Adobe site and by downloading the installer file). Still no window.
Dreamweaver works, Extensions Manager works, Exchange RSS in browser works, I don't see any firewall issues, etc.
A ":Users:username:Library:Application Support:WidgetBrowser" is absent, let alone the configuration file.
What's supposed to happen? How does DW know where WB is installed? Why does the app launch and there's no window? Is there an xml or configuration file that I can edit to make things work?
Please don't ask me to uninstall/reinstall CS5. That's too Dilbert for me.
Thanks.
Adobe Creative Suite 5, Mac OS 10.6.7

1. In the Widget Browser you got 2 windows, "Adobe Exchange" with all widgets and "My widgets" that is empty when you start.
2. In "Adobe exchange" you choose the widget you want to download, it downloads automatic.
3. Then in the bottom of that screen you choose "+ add to my widgets".
4. Go back to Widget Browser and choose "My widgets" and the new widget should be there.
5. In DW open a program, choose -Insert- -Widget- and a small window open where you can choose Widget and Preset.
6. To make your own presets, go to Widget Browser, choose "My Widgets" and click on one of the widgets and there you can create your own presets.
I just learned all of thi yesterday evening and it works fine for me.
Good luck!
Sven

Widget Browser attempts to reinstall AIR

Hello all!
I'm experiencing an issue where, when I try to open the Widget Browser, it attempts to automaticall reinstall AIR. The install window comes up and hangs with no change in status. I have previously installed AIR. I have uninstalled and reinstalled both programs, and I've also tried adjusting permissions to no avail. I would really appreciate any assistance. I'd like to note that I am a beginner Mac and Dreamweaver user, so... be gentle.
Thanks!
-JAK

That is odd. What version of the OS are you running? Are you able to run other AIR applications? Try launching the Dreamweaver Help system by pressing F1 in Dreamweaver or selecting Help, Dreamweaver Help. Can you try installing this AIR app that just returns the version # of air installed and see if that works and report what version of AIR you have installed.
http://forums.adobe.com/servlet/JiveServlet/download/2413583-28129/version.air.zip
The latest version is 2.0.2 and can be installed from this location:
http://get.adobe.com/air/
-Scott Richards
Dreamweaver Team

Welcome to the Widget Browser Forum

Hi,
Thanks for visiting the Adobe Widget Browser forum.
We hope you like the product so far!
Post any questions or feedback you have here.
As this forum begins, I just want to describe how the Widget Browser works so you can direct questions appropriately.
The Widget Browser works by reading zip files and XML to generate the widget and it's editable properties.
There are 3 parts to think of when looking at issues.
--The Widget Browsr itself: The actual AIR app.
--The zip and the OAM file. All the assets are delivered to the Widget Browser in a zip file. With this zip has an xml file (and the rest of the assets) that describes all the properties of the widget. We call this the OAM file (after Open Ajax Metadata, which is the spec we use to build the file.)
--The widget itsetlf. The js, css and any assets needed to actual create the widget.
Since widgets are free, usually with MIT or GPL licenses, and the OAM format is public, the person that wrote the OAM and packaged the file might not be the same person that wrote the actual widget.
--If there is a problem with the WB itself, that is an Adobe issue.
--If there is something wrong with how the properties in the Configuration Panel are working or assets are missing or incorrect, that is an issue with the OAM/zip file.
--If something is not working correctly with the widget in the web browser, that could be an issue with the actual widget code. This might be the result of the Widget Browser generating bad code due to an error in the OAM or it just might be a bug in the widget itself.
So now that we know a little bit about the behind-the-scenes, we can be more accurate when describing issues within the Widget Browser.
And let me say a bit about the generated HTML code.
Most widgets have js files, CSS files and maybe some image assets.
When you Save Widget Files or insert the widget with Dreamweaver CS5, you will note perhaps a lot of CSS in the head of the document, depending on the widget.
All the rules added to the <head> are rules that can be changed in the Configuration Panel. CSS rules are written to the <head> so that we don't edit the original CSS file that comes with the widget. The <head> rules are the rules for the specific instance of the widget and use the cascade to trump the external rules.
This allows for multiple widgets on a page or site with differing styles.
Once they are on the page, you can move/delete them as you like, following all the usual rules of order and cascade, like any other web page.
Another note about code.
These have been designed so when you Save Widget Files from the WB, it will write out a HTML copy of the widget with the dependent files in a folder next to it. Paths are written out document relative so it will work correctly.
When inserting in Dreamweaver CS 5, the asset folders are added to the root of the site, no matter where you page is, and paths are written with site root relative paths so the assets will work from any location.
We can generate a FAQ as we begin to get actual FAQs.
Please provide feedback on the Widget Browser. We would love to know what you think.
Thanks,
Donald Booth
Adobe Web Frameworks Team

I love Flash Catalyst! I have always wondered why Adobe does not embed Spell check in any of their products to my knowledge ? Also, I am building a site and I need to import word doc formatted text into the text box in Catalyst. Is their away to maintain the word formatting in Catalyst, if so, how? I am using a Mac. I would prefer not having to convert to text to a pic or vector format so the text can easily be updated in the future.
Thanks

System reboot while installing Adobe Widget Browser.

Hello ,
While proceeding though the installation of DW CS5 Trial , Everything is ok till it goes to install Adobe Widget Browser. My system unexpectedly restarts without any warning. Same happens when I try to install it individually.
My system specs :
1 GB Ram
512 mb video memory
120 GB HDD

When your computer reboots, it is usually a sign of hardware-related issues, possibly something wrong with the hardware, or some kind of driver conflict.
What version of Windows are you running?
If it's XP, have you updated to Service Pack 3 (SP3)?
How much space do you have free on the hard drive you mention?

Using a Mac, Firefox does not allow me to use the vertical scroll bar real-time in Godaddy webmail. It lags and jumps. Godaddy says it is a browser issue. Does not happen in Safari with Mac OS 10.4.11 or on PC w/windows vista.

The problem is not my server (Comcast) as it does not happen on Safari when trying different websites as well as Godaddy.com or my Godaddy webmail. The problem is only when using my Mac OS X 10.4.11 (not my Windows Vista PC) in Firefox. I only began noticing this recently. Godaddy says this is a browser issue with my Mac as they cannot replicate it.
== URL of affected sites ==
https://login.secureserver.net/index.php?app=wbe&clearcookies=1

The problem is not my server (Comcast) as it does not happen on Safari when trying different websites as well as Godaddy.com or my Godaddy webmail. The problem is only when using my Mac OS X 10.4.11 (not my Windows Vista PC) in Firefox. I only began noticing this recently. Godaddy says this is a browser issue with my Mac as they cannot replicate it.
== URL of affected sites ==
https://login.secureserver.net/index.php?app=wbe&clearcookies=1

Can't log in or access widget browser from within Dreamweaver

I can't sign in to my Adobe account through Dreamweaver or connect to the Widget Browser
“Unable to load WSDL. If currently online, please verify the URI and/or format of the WSDL (http://www.adobe.com/cfusion/exchange/exchangedwwidgetsfacade.cfc?wsdl)”)
Seem s like a lot of other people have had this problem and most seem to have fixed it by emptying their browser cache
Not working for me.
I've also reinstalled Dreamweaver from scratch but still get the same error
Any other ideas?

Are we talking about the same product here?
I assume so, you are the only one that can be certain. I supplied a link to the supplier as in Comments Inserter Widget for Facebook™ so that you can verify same.
I bought it through Adobe as a Dreamweaver add-on and so I would expect there to be some means of delivery offered so that I can integrate it with Dreamweaver.
You purchased it from the supplier after having seen it on the page that Adobe has offered as a market place for the addons. Adobe has even supplied a link to contact the supplier Contact Us / Support

Nokia 500 and Belle Refresh: browser issues.

Greetings.
The Belle Refresh was indeed a welcome refresh for this low-to-midrange phone. However, there is a serious issue with the browser.
With the update to Qt 4.8, you inherited QtWebKit, an amazing browser I know very well. In a desktop, it's fast, although it eats more memory than Firefox. However, in a cell phone like the 500, with limited amounts of RAM, this browser freezes the phone, due to the lack of memory. I'm also sure this browser can and will break phones with more memory and Belle FPx, since I've made QtWebKit use more than 1 GB of RAM in a computer running KDE.
There is a way to avoid this, called "user agent". Opera Mobile avoids this scenario by telling pages through user agent "hey, don't be hard on me, I'm browsing this from a cell phone", and pages adjust themselves to that scenario. However, you didn't tweak the user agent in your browser.
If you add no user agent tweaking, full HTML5 support, Flash Lite support (the much higher specced iPhone 4S doesn't support Flash), and low memory, you get a nightmare scenario.
1. The webpages send their complete, full featured DESKTOP versions to my Nokia 500.
2. QtWebKit supports everything, so, it makes a faithful attempt to properly render the page, even with Flash apps.
3. Nokia 500 has only 70-80 MB of RAM free for apps to use.
4. Boom.
Can you release a hotfix for Belle Refresh, changing the user agent of Nokia Browser to something that can trigger the mobile version of web pages? In that scenario, QtWebKit will eat much less memory and everyone will be happy. And please, can you do this for everyone using Belle Refresh?

I can confirm serious browser issues with the Belle refresh on a C6-01 device. The crash is so severe that only taking out the battery helps. It typically occurs when scrolling larger, feature-rich (and image-rich) webpages, so far I've seen this only on mobile connections (Edge, Umts), but that may be due to lack of testing with WLAN. (Where I've got WLAN I've usually a more powerful device as well..

IWeb pages reverting to older version- not a browser issue, deleting prefs/caches no help

Hi everyone, forgive me if this is a newb question but I've scoured the internet for answers and all of them I've already tried with no luck. I'm using iWeb and encountering a problem that has me completely stumped. I'm trying to publish changes to my site, (I do not use mobileme, I publish to disk and upload files via Fetch) and for some reason something is changing my html files when I try to upload them. The html files are correct on my hard drive when I publish them, and yet when I upload them, they revert to the older version. This is not a browser issue, as I've cleared my cache, refreshed and tried using Safari, Firefox and Chrome with no luck. I've also tried 're-setting' iWeb by deleting iWeb preferences/cache, and tried moving the domain file from application support, creating a new website, deleting it and then re-loading the old site. Nothing, still the old site. It's new in iWeb, new when I open the html files on my drive, and old as soon as I upload.
I seem to remember having this problem before, and what I found was iWeb's cache kept replacing my new pages with the old ones every time I wanted to upload them. 'Re-setting' iWeb did the trick then, but it's not doing it now. Any ideas on what is going on? It's a little disconcerting seeing a file correct on the disk and then change itself, while uploading, into an incorrect version.
Using:
iWeb 3.0.3
Mac OS 10.6.7
Mac Pro 2.66 Dual core

If you make changes to a page there are files in the Scripts folder that get updated and must be uploaded also. Depending on what you're using to up load the files it can be setup to upload just those new or modified files.
Cyberduck is a free FTP client that works very well and if used in conjunction with this tutorial will upload only those new or modified files: #2 - Uploading only those new or newly edited and published files when using a 3rd party FTP client
OT

Widget Browser funktioniert nicht

Guten Tag, ich arbeite mit Dreamweaver CS6 auf Windows 7. Wenn ich den Widget-Browser öffne, erhalte ich die folgende Meldung: "Fehler beim Abrufen des Widget-Feed." Angefügt zwei Links:
Neu laden --> ergibt keinerlei Reaktion.
Weitere Informationen anzeigen. Beim Anklicken erscheint die folgende Meldung: Widget-Feed-Fehler. Fehler beim Abrufen des Widget-Feed. Vergewissern Sie sich, dass eine Verbindung mit dem Internet hergestellt ist. Unbekannter Fehler.
Die Verbindung zum Internet besteht.
Bei der Suche nach einer Lösung bin ich auch aufgefordert worden, eine App von CreativeCloud herunterzuladen, was ich gemacht habe - ohne Erfolg, die Fehlermeldung kommt nach wie vor.
Beim Anklicken des Hilfe-Buttons im Widget-Browser kommt "Fehler 404" - auch nicht gerade hilfreich...
Wenn ich den "Anmelden"-Button im Widget-Browser anklicke, kommt die folgende Meldung: Unable to load WSDL. If currently online, please verify the URI and/or format of the WSDL (http://www.adobe.com/cfusion/exchange/exchangedwwidgetsfacade.cfc?wsdl). Nachgedoppelt wird mit einer Meldung in Deutsch Fehler bei der Anmeldung.
Natürlich habe ich mich in vielen Foren umgesehen, aber eine Lösung dieses Problem habe ich nicht gefunden, nur Hinweise, dass es andere Möglichkeiten gibt. Da staunt der Laie - schliesslich wurde das ja mitgeliefert im Paket und ich habe nie eine offizielle Information erhalten, dass dies jetzt nicht mehr funktioniere. Vielmehr zeigen diverse - übrigens sehr gut gemachte - Lernvideos, was man alles mit dem Widget-Browser machen kann. Wirkt attraktiv, darum ist die Fehlermeldung erst recht ärgerlich.

https://forums.adobe.com/thread/1499188

Return to Widget Browser for editing a customized Menu Bar?

How to edit a Spry Menu 2.0 _after_ customizing with the Adobe Widget Browser and inserting the menu and further structural customizing via DW CS5?
Yes, the new Browser and the new Menu 2.0 are a large step forward - thanks! But no resources (searched high and low ...) show how to return to the Widget Browser, and all its wonderful configuration tools, once a menu is inserted.
The Widget Browser apparently does not allow setting up correct button labels, levels, etc.; instead the Widget Browser is where all the 'style' configuration is done. So, we use the Widget Browser to configure / style a Spry Menu 2.0 and then insert it into a page with DW CS5. Of course, then the menu has to get the correct button labels, levels, etc. So further structural customization, in DW.
Now, we decide we want to try out some alternative styling, to compare and contrast options. Of course, that means we want to return to the Widget Browser again and use it. That CSS is hard in a widget such as this, and the whole point of the Widget Browser is to make that styling accessible.
How to do that, to return to the Widget Browser - and at the same time not lose all the structural customization done in DW?
What are we missing? Your help is most greatly appreciated. David Allen

Yes, of course! Add an ID to each main menu bar item (customize...) and in the CSS, make descendant selectors that include the ID and indicate the background color for that section.
For this set of menu items:
<li id="food"><a class="MenuBarItemSubmenu" href="#">Food</a>
    <ul>
      <li><a href="#">Item 1.1</a></li>
      <li><a href="#">Item 1.2</a></li>
      <li><a href="#">Item 1.3</a></li>
    </ul>
</li>
these selectors:
ul.MenuBarHorizontal li#food a.MenuBarItemHover,
ul.MenuBarHorizontal li#food a.MenuBarItemSubmenuHover,
ul.MenuBarHorizontal li#food a.MenuBarSubmenuVisible
    background-color: green;
will add the background-color 'green' to all hovered menu list items (and submenu list items) of the list item with the id="food".
If you want yet another color for the submenus, do it this way:
ul.MenuBarHorizontal li#food a.MenuBarItemHover
    background-color: green;
and
ul.MenuBarHorizontal li#food a.MenuBarItemSubmenuHover,
ul.MenuBarHorizontal li#food a.MenuBarSubmenuVisible
    background-color: lightgreen;
this latter will catch all the submenus's hover background-color.
Beth

Widget Browser Issues...

Similar Messages

Maybe you are looking for