Wifi bars on but browser says no internet connection detected
I am on my school network and although when I log on, I get all bars on the wifi icon blacked in, my browsers all say that there is no internet connection detected. What should I do?
There my be an Acceptable Use Policy that you have to accept before using the network. Turn off your wifi, then turn it back on and reconnect. Then open your default web browser, to see if anything pops up.
Similar Messages
-
Help
WiFi only works close to router, DNS fail, Signal Bars present but Safari says no Internet, I've deleted and re-added through to reset and full reset, I had no problem with 4.3.2 only 4.3.3 both my iPhone4 and my iPad2. I am now beside router - no problem, but go 20 metres and WiFi becomes unstable. Only way to get either to work is disable WiFi either as a Hot Spot or turn it off and use the 3G connection. This worked with 4.3 & 4.3.2 what has gone wrong? I raised it at the Apple Store in Belfast as a problem but was told that there was no problem with Apple but I must have a faulty router - yeah - that's a lot of faulty routers, my home, my office, my holiday home, Starbucks, my friends house, my son's house. I've tried all the 'fixes'. I think it is a plan to force us to buy Apple RoutersTwo ways out, I added two more Belkin Access Points in my house in Spain so that I'm not more than 10Mtrs away, (Reinforced Concrete & solar glass 2010)
I bought 3 Apple Airports, 1 x Extreme and 2 x Express (1 as a hard wired AP, 1 as an extender) for my other house (Brick construction 1930's)
Everthing now works perfectly, as I said 'an apple plot', so either blast them with signal or visit your nearest apple store.
Early beta iOS5 (iPad) is also much inproved in Beta 3, I have not had any problem with 'Lion'
Happy hunting!
john -
Trying to restore ipod but itunes says no internet connection.
Trying to restore ipod but itunes says no internet connection. Uninstalled and re-installed itunes but still have same problem. Trying to restore because I uploaded songs from Yahoo music jukebox to ipod but they won't play. They are listed as "other" and I can not access them to delete or play. Tried to delete through music jukebox but now it say " error reading content" so I figure restoring ipod is the only way to fix problem.
Does this help?
http://docs.info.apple.com/article.html?artnum=304468 -
Network Diagnostics gives me all green, but Safari says no Internet connection
Whenever I awake my computer from sleep, it takes about a full minute or more (haven't timed it yet) before it will recognize my Internet connection. As soon as I open it, it automatically connects to my home network, but if I try to use the Internet in any way, I can't. Safari tells me I have no Internet connection. When I open Network Diagnostics as it suggests, I have all green lights. I can go all the way through Network Diagnostics, finish still with all green lights, and Safari still says no Internet connection. If I give it about a minute, I can reload the page, and everything will be fine…until I close the lid.
Any ideas? This is driving me crazy.
Other potentially helpful information:
I was away for the summer. Before I left, I did not have this problem. While I was away, I upgraded to Lion, but I didn't have this problem on any networks before or after the upgrade until I came back home. As far as I can tell, none of the other notebooks here (all Macs) have this problem. Weird, right? They are all running Snow Leopard or Leopard, though, come to think of it. So perhaps it is a combination of the network and Lion?I've had that problem before, but when that was the problem, the computer was still trying to connect to the network and I didn't have green lights from Network Diagnostics. In this case, my computer connects instantly, I get all green lights from ND, and I still can't use the Internet for about two minutes. Everything looks fine in the network settings, green light on Wi-Fi, gives me an IP address, etc.
Is there another program besides Network Diagnostics that could tell me exactly where I'm not getting through? -
Touch says I have Wifi connection, but Safari says no internet connection
My wifi had been working fine on my iPod Touch, but it all of a sudden stopped connecting to the internet 2 nights ago. I still have wifi internet connection on my laptop though...so it much be an ipod issue. I reset my modem/router and my network connection on my ipod...why isn't my ipod connecting to the wifi internet anymore? :[
Message was edited by: musicequalslife15Did you reset your network connections using Settings > General > Reset > Reset Network Connections?
Did you try to log back into your network using Settings > WiFi > Other Networks and re-entering your network name, security settings, and password?
Have you tried a general reset of your iPod? -
Why does my macbook say theres wifi but says no internet connection
can someone help me fix my wifi because it says no internet connection but shows full wifi bars. every other apple product is working
Change your router channel number. Most times this works & is all you have to do.
See KB Articles: http://support.apple.com/kb/HT1401 AirPort troubleshooting guide
http://support.apple.com/kb/HT2712 Using network locations in Mac OS X
Manually provided DNS server addresses are higher priority than DHCP's
http://support.apple.com/kb/HT1714 Solutions for connecting to the Internet, setting up a small network, and troubleshooting
============================
System Preferences>Network
Click the Assist Me button.
In the next window that pops up, click the Diagnostic button & do the necessary.
Also, run the Airport Utility app which is located inside the Utilities folder.
=====================
If using a Linksys router, contact LinkSys Customer Support and/or post in their forums.
If using Apple's Airport, please re-post over in one of the AirPort Forums. -
My PowerBook G4 says that it's connected to wifi, but it still no internet connection. The connection will work for a while, and then I'll have to run diagnostics and it will work again for a few minutes and then stop working again. What's going on??
Basic troubleshooting techniques for any problem
Restart the computer = joy?
Reset the router = joy?
Restart the computer in Safe Mode = joy?
ask yourself "What changed immediately preceding the onset of the problem?" = Anything... hardware, software, cabling, environment (interference source)
ÇÇÇ -
i connect my iphone to my pc and i tunes open automatically,then i press dowload and update but itunes say am not connected to the internet while my pc is connected to the internet what isi the problem?
If you are the only user on your computer you probably don't have multiple user accounts set up and can disregard that. If you are using iTunes 11 go to View>Show Sidebar. Now see if your iPad appears under Devices on the left side when you connect it. If it does, click on the name of your iPad on the left side and your iTunes sync settings options will appear in folders with tabbed headings to the right.
If it doesn't appear on the left side, follow the troubleshooting steps shown in this article: http://support.apple.com/kb/TS1538. -
My IPOD and Macbook Pro both will not connect to the Itunes store through Itunes says no internet connection, but I can connect through safari and I have a internet connection
As I mentioned above, I am not very tech savvy so I have no idea why a wireless protocol would be showing up there, I'm just listing everything I see in hopes that someone might know something I can try. This is why I am asking for help here - I'm not sure what has happened that has made me unable to connect, especially since it seemingly occured while nobody was using the computer.
I guess I should clarify that I'm not a total hillbilly- normally my firewall is set to 'on', but I set it to 'off' to try and troubleshoot the issues here as I was told that sometimes it can interfere with the computer's ability to connect to the internet. If this is not the case and firewall does not affect anything, I will turn it back on while I try to fix this.
I have tried the method you mentioned above a few times - I actually contacted my ISP earlier this week and they recommended resetting the router like that. They didn't mention any known network issues. -
I've lost my iPod and I'm trying to find it on the Find iPhone app, my router says its connected to my iPod but iCloud says 'No Internet'. What should I do? I've tried searching for it everywhere but I can't see it.
You can't track it if:
1. It' not turned on and connected to internet
2. It's wiped -
LTE 3G being weird says no internet connection
I have an iPhone 5 32GB and it says that is is running LTE or 3G and then my apps say no internet connection, cannot connect to the internet, app must have an internet connection. I try and connect to Wifi and it is a little bit better but it still happens... Any Suggestions? Went to apple and they replaced it and the new one is still doing the same thing?
same issue from modesto ca. We currently cant even connect to the internet on our devices over 3g or lte
-
facetime stops working after installing mavericks. After login it says: check internet connection and try again. My internet connections are ok, I have both wifi and lan.
Please describe in detail what happened when you took all the applicable steps in the support article. That's the starting point for any further efforts to solve the problem.
-
I was lately downlaoding a 700mb file, but i lost the internet connection and only 635mb was downloaded and i have the .part file but the download menu says that download failed so i cant click resume, is their any way that i can continue dowlaoding the file without the need redownloading from the beginning?
I do not know if your file can be recovered. But I may be able help you to recreate it with ease. If you will settle for a composite where all image are re-sized for a particular tile size and virtually cropped to its aspect ratio. However all source image need be gathered into a folder to use my script process. Paste Image Roll Script and Picture Package Support Link http://www.mouseprints.net/old/dpr/PasteImageRoll.jsx
-
My "Shop Local" app won't open, says; Checking internet connection
I downloaded the app; "Shop Local" and it all went fine, but when I tap "ok" it says "checking internet connection". All of my other apps work, fine no problem. How can I get this to work??
I tried deleting it but it reloads from the cloud and I guess I can't start from fresh.Is this the app? https://itunes.apple.com/us/app/shop-local/id475372575?mt8
I notice that it was released in Nov. of 2011 and has never been updated (appears to have been designed for iOS 3), plus has a fair number of negative reveiws. The support site appears to be a dead end. If this is the app, I'd recommend deleting it and finding another one. -
Trouble registering says no internet connection
Why am i having trouble registering my cs6 I keep getting a message saying "no internet connection but my internet is working fine
Sign in, activation, or connection errors | CS5.5 and later, Acrobat DC
Mylenium
Maybe you are looking for
-
RAM upgrade for a Satellite A100-847
I would like to upgrade the RAM for my A100-847 from my current 512 MB by adding another module for 512 MB but i face a compatibility problem because looking at the manual the only compatible modules are the following: 256 MB: PA3389U-1M25 512 MB: PA
-
How can I convert 400 data points from a spreadsheet file to an array?
The spreadsheet file contains over 5000 data points (in one column) of which I only want the first 400 and want to convert them to an array in Labview. I tried to use the 'readfromspreadsheet' vi but it wasn't much help. Please tell me how i should a
-
Phone won't go into sleep mode
I have the new OS but after downloading the new iTunes. My screen stays on all the time now. Actually have to press the power button on top to turn the screen off. I turned the Auto Lock on and Off and adjusted the time from 1-5 minutes. Screen still
-
Dll (sender) to SAP(reciever ) Scenario
Hi, I have a query regarding the dll to SAP scenario . which adapter can be used to call the dll (The application is a knd of a solver that is used to optimize the scarce resources ).I need to integrate this application that is a dll (Name is LP_Solv
-
hello, i want to understand why for testing video signal like RGB,Y/C.. we connect directly a video signal in a ni pxi 5122 but for yuv signal we must use an external card who has a trigger connected to a trigger of ni pxi 5122 ??