Wifi connectivity is lost after 12 hours on 32RL938

Hi all,
I'm experiencing a very strange and annoying issues on my 32RL938 regarind wifi connection.
I set up the TV and connect it to my home wifi network and everything is just fine four about 12-15 hours.
After leaving the TV in standby mode for some time (lets say during the night) when I start It again I realize that although my tv says its connected to my local WIFI theres no access to Toshiba Places or Network DLNA player.
Also the Network connection test fails.
If I check on the router the TV has a valid IP and looks connected, but any ping test to its ip fails.
The only workaround I managed to identify to this issue is to reboot the router.
After reboot the TV connects fine to my network and I can access Internet on it.
What is very strange is that in my home I have 6 other wi-fi devices (laptop, android phone, printer, tablet etc) that work perfectly fine while my TV shows it has no connection.
Because the ruter is not in my room its quite hard to reboot it every day.
Please let me know If you experience this kind of behavior and what could I do to fix it. I also tried with static and dynamic ip for the TV but the behavior is the same.

Hi Tony,
Thanks for reply.
This is what I also suspected. So I connected the TV to another WIFI. I live in a campus so I have plenty of wifi networks available from my neighbors. I asked the pass from one of the neighbors and connected the TV.
The TV worked OK last night but this morning it doesnt even connect to the WIFI network although the WIFI signal is fine, so I think it might be something wrong with the TVs embedded WIFI interface.
Unfortunately Toshiba doesnt have a firmware upgrade for this model yet. This is a Tv marketed in the second half of 2012 and they dont have any firmware update.
After comparing this TV with others from my friends I tend to believe that Toshiba tv firmware is full of bugs and ages behind the other manufacturers.

Similar Messages

  • HT1595 Why does my wifi connection is lost in apple TV after a few minutes?

    I have tried giving apple tv a static ip but the connection is lost after a few minutes and does not come back. I have tried re-booting the router as well as ATV!

    I have this same problem, and apple said that it has to do with the router closing the ports so you have to call whoever makes your router and have them help you port forward. I did this and it helped for a couple months, then back to the same ol' same ol'.

  • TS1398 Since upgrading to ios6, all apple devices (new ipad, 2 iphone4 & itouch) are having difficulty reconnecting to the home hub wifi network. I.e, every time the lock screen comes on, the wifi connection is lost when you reopen the device. It's an ios

    Since upgrading to ios6, all the family's apple devices (new ipad, 2 iphone4 & itouch) are having difficulty reconnecting to the home hub wifi network. I.e, every time the lock screen comes on, the wifi connection is lost when you reopen the device and we have to reconnect through settings. This appears to be an ios6 software issue.
    Is there a solution to this wifi connection issue or do we wait for a software fix?
    I'd hate to think Apple is going down the Microsoft path, of passing untested software onto the user. What ever happened to Regression Testing, to ensure the existing functionality remains intact?
    I bought into the Apple dream, because it was intuitive, reliable & enjoyable to use, all the things that Microsoft windows isn't.
    Other issues we are experiencing are, Games are stuttering and the kids really miss the old YouTube app.
    Please Mr Browett, sort these issues out.

    iOS 6 Wifi Problems/Fixes
    Fix For iOS 6 WiFi Problems?
    http://tabletcrunch.com/2012/09/27/fix-ios-6-wifi-problems/
    Did iOS 6 Screw Your Wi-Fi? Here’s How to Fix It
    http://gizmodo.com/5944761/does-ios-6-have-a-wi+fi-bug
    How To Fix Wi-Fi Connectivity Issue After Upgrading To iOS 6
    http://www.iphonehacks.com/2012/09/fix-wi-fi-connectivity-issue-after-upgrading- to-ios-6.html
    iOS 6 iPad 3 wi-fi "connection fix" for netgear router
    http://www.youtube.com/watch?v=XsWS4ha-dn0
    Apple's iOS 6 Wi-Fi problems
    http://www.zdnet.com/apples-ios-6-wi-fi-problems-linger-on-7000004799/
    ~~~~~~~~~~~~~~~~~~~~~~~
    Look at iOS Troubleshooting Wi-Fi networks and connections  http://support.apple.com/kb/TS1398
    iPad: Issues connecting to Wi-Fi networks  http://support.apple.com/kb/ts3304
    WiFi Connecting/Troubleshooting
    http://www.apple.com/support/ipad/wifi/
    How to Fix: My iPad Won't Connect to WiFi
    http://ipad.about.com/od/iPad_Troubleshooting/ss/How-To-Fix-My-Ipad-Wont-Connect -To-Wi-Fi.htm
    iOS: Connecting to the Internet
    http://support.apple.com/kb/HT1695
    iOS: Recommended settings for Wi-Fi routers and access points  http://support.apple.com/kb/HT4199
    Additional things to try.
    Try this first. Turn Off your iPad. Then turn Off (disconnect power cord for 30 seconds or longer) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
    Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
    Change the channel on your wireless router (Auto or Channel 6 is best). Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
    Another thing to try - Go into your router security settings and change from WEP to WPA with AES.
    How to Quickly Fix iPad 3 Wi-Fi Reception Problems
    http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
    If none of the above suggestions work, look at this link.
    iPad Wi-Fi Problems: Comprehensive List of Fixes
    http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
    Fix iPad Wifi Connection and Signal Issues  http://www.youtube.com/watch?v=uwWtIG5jUxE
    Fix Slow WiFi Issue https://discussions.apple.com/thread/2398063?start=60&tstart=0
    Unable to Connect After iOS Update - saw this solution on another post.
    https://discussions.apple.com/thread/4010130
    Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
    ~~~~~~~~~~~~~~~
    If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
    ~~~~~~~~~~~~~~~~
    YouTube is not now part of iOS 6.
    However, you can go to the App Store and do a search using YouTube. You can download several YouTube apps: YouTube (for the iPhone, a IPad app is in work), several users  like Jasmine and YouPlayer.
     Cheers, Tom

  • HT1365 Hi I have Imac 5 processor and I guess installed Lion I am having difficulty with Wifi connection. Sometimes after shut down number of times still does not access wifi or if it does I can see wifi bar on iMac but can't open any webpage. Please help

    Hi everybody,
    I have Imac 5 processor and I guess installed Lion I am having difficulty with Wifi connection. Sometimes after shut down number of times still does not access wifi or if it does I can see wifi bar on iMac but can't open any webpage. Please help
    Thanks

    Hello:
    There was an OS X 10.7 update released a month or so ago that fixed this problem.  Run software update.
    Barry

  • I have a new Panasonic TV with wireless capabilities.  When I connect via my AirPort Extreme to Netflix connection is lost after about 5 minutes.  How to rectify.

    I have a new Panasonic TV with wireless capabilities.  When I connect via my AirPort Extreme and access  Netflix the connection is lost after about 5 minutes.  I have moved the AirPort, shut down all other computers that use AirPort for wireless connection.  How to rectify?

    Andrea Z. wrote:
    I have lost my iPhone on August 27, 2013 at 6:15 a.m. when I posizioned it on the strip for the scanner objet of Linate Airport.
    After about 10 minutes when I was already on the plane my friend tried to call my number but the phone was already off.
    By searching with the "Find my iPhone" system, the device is OFFLINE and does not appear on the map.
    I have already written to the lost property office of the Linate Airport but at the moment they do noto have yet responded.
    I have already forwarded the complaint to the police.
    How can I find out it if my iPhone 5 is offline?
    Thanks in advance for the answer.
    Andrea Z.
    29/08/2013

  • Network connection is lost after a few hours

    Hi Everyone.
    I'm new to the Mac world.
    I have two issues.
    1. Is there a way I can always map my network drive on my mac to see my windows PC? I always have to manually connect to it.
    2. I notice when I put the mac to sleep and I come back after a few hours I do not have connection to my network drive on my windows PC? It says that connection is lost or not available. It then takes another 3 minutes for it to recognize (beach ball thinking) and then I can proceed with my work.
    Please help.
    Thanks,
    Dragan

    I commented on that already in this thread in which someone did the same suggestion:
    http://discussions.apple.com/thread.jspa?threadID=816760&tstart=15
    I will copy and paste it:
    switching to 802.11b isn't really the solution…
    with 802.11b you're restricted to 11MBit/Sec and it switches quite fast to 5.5 MBit/Sec.
    I have a card in my iMac that supports 802.11g (and even n - but for that I would need a new router…and the driver…an airport extreme base station is not really an option for me) and I want to use it. I want to be able to stream video in my home-network between the computers. With 802.11b it's not really possible. In addition I want a "fast" data transfer per WLAN - even though 11g isn't as fast as copper, it's definitly faster then 11b.
    Apple should do something on that problem. Right now I'm on 11g only and that doesn't help…

  • Qosmio X500: Lan/Internet connection get lost after period of time

    Hi all,.
    I got the qosmio x500 for about half a year now...
    I got this problem where after about 5 hours or less the lan/internet connection get lost.
    I disabled the wireless connection and is using only the wired connnection now.
    When it get disconnected... all devices seems to work seemlessly, no problem can be found. I checked the win7 network adaptor --and it seems to be connected properly.
    I haven't got a slightest idea how to fix that.... Only a reset of the system and reloading the os results with a valid connection.
    It is even stranger,. When using it for a piriod of time (listeding to audio streams from the web)... when getting back to the machine the audio connection seems to work properly.... but when trying to access other sites, or other machines in the homegroup, or network (under explorer). It result faulty.
    Please guide me somehow how to fix the issue, it is bugging me a lot (all these resets to the machine probably doesn't do it any good as well).
    thanks in advance,.

    Hi,
    It could be the energy saving feature of your network card.
    Right click Network Icon on the status bar, choose 'Open Network Center and Sharing', Click on 'Connection', Click on 'Properties' (low left button), you'll see the tab with your Network Properties. Click 'Configure' (Upper right button), choose 'Power Management' (last right tab).
    Uncheck 'Allow computer to shut down this device to save energy'. Probably your problem will now be solved.
    If the names I write aren't exactly right, I'm on a French language computer so my translations can be slightly wrong.
    Bye,
    Ton
    Message was edited by: Tonio78370

  • Drop off wifi connection more frequently after update to iOS 5.1

    After the system updated to iOS 5.1, the wifi connection on my iPhone 4S drops off more freqently than before. For example, when I updated Galaxy on Fire 2,  the wifi lost connection about 5 times. But the connection on my Android tablet and laptop is completely fine.
    Did anyone experience the same ?

    Check again your list of activated keyboards and make sure only English is there.  Then tap the English item once and make sure that it is set to qwerty and not qwertz or azerty under the Software category.
    If you have a "globe" key on your keyboard, you have NOT gotten rid of the non-English ones from your setting.

  • Exchange 2007 - unable to connect to smtp after severall hours

    Hi,
    We have a Windows SBS 2008 server with Exchange 2007 SP3. After severall hours we are unable to connect to the server with telnet on port 25 from outside. Sometimes a local telnet on the server still works but not always.
    The only solution is to restart the server. The transport service can not be stopped.
    Even after a fresh reboot the telnet session does not alway show the smtp banner.

    Hi Joost,
    Is there any related error message left on Exchange server?
    I have found a similar thread for your reference:
    https://social.technet.microsoft.com/Forums/en-US/5e2b3320-7c97-4b33-bd8e-e27768f51ec0/hub-transport-service-wont-start-and-keep-running-sbs-2008-exchange-2007
    More detailed error message without sensitive informaiton is helpful for the further troubleshooting.
    Also, SBS 2008 is different from Exchange 2007 on Windows Server, I suggest ask SBS Forum to double confirm this issue.
    Thanks
    Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact [email protected]
    Mavis Huang
    TechNet Community Support

  • Wifi connection alway disconnect after update to iOS6

    After update to iOS6 for a month, I found the wifi connection alway disconnect and need to reconnect severaly times. Plese help to suggest for setting up.

    Hello there cyldevil,
    I would recommend using this article if the Wifi is grayed out in settings.
    iOS: Wi-Fi settings grayed out or dim
    http://support.apple.com/kb/ts1559
    Here is also some additional info on troubleshooting wifi in general on your device from iOS: Troubleshooting Wi-Fi networks and connections http://support.apple.com/kb/ts1398
    Be sure that you are in range of your Wi-Fi router (access point).
    Tap Settings > Wi-Fi and turn Wi-Fi off and then on again.If unable to do so, see this article.
    Confirm that your Wi-Fi router and Cable or DSL modem are connected to power, turned on, and indicate that they are connected to the Internet.If not, refer to your network administrator or ISP for assistance.
    Restart your iOS device.
    Tap Settings > Wi-Fi and locate the Wi-Fi network to which you are connected. Then tap > and Forget this Network. Try to connect to your desired Wi-Fi network again.
    Note: You will need to enter your Wi-Fi password again if your desired network requires one.
    Turn your Wi-Fi router off and then on again2. If your ISP also provides cable or phone service, check with them before attempting this step to avoid interruption of service.
    Update your device to the latest version of software.
    Update your Wi-Fi router to the latest firmware2.For AirPort Base Stations, see this article for information about firmware updates.
    All the best,
    Sterling

  • I just installed IOS6 and wifi connection get lost

    After installation of ios6 wifi connection is not stable pop up the alogin page to apple.com with an error message of wrong address. This happen on my ipad 3 and iphone 4s both devices.

    Try going to settings-general-reset and then reset all settings. You can also try to reboot your phone/ipad hold the power and home button together for ten seconds until the Apple logo shows up on screen.

  • My wifi connection is broken after upgrading to iOS 7.0.4, I'm using iPhone 4s. Anyone can suggest me some solution to fix this problem?

    I've updated my iPhone 4s to iOS 7.0.4 and my wifi connection is runied. I've tried restore the network connection and restoring my phone for many times. Other devices in my home can connect to my home wifi and I've no problem with iOS 7.0.3. Anyone can help me out?

    My phone has just done this for the second time, the first time it was in warranty and apple replaced it for free. It has now happened again and as the warranty is finished  I'm being told it will cost £115 to fix (replace again) I've given up and I'm now getting a new phone.

  • Will wifi connectivity be lost in power nap mode?

    Tried switching to power nap mode while updating software...but it looses wifi connectivity.
    Does it work only with ethernet connenctions?

    You should be able to download updates from the Mac App Store via Ethernet or Wi-Fi.
    Check out this article >  Mountain Lion: About Power Nap

  • After recent update to airport on iMac, the wifi connection is lost when it goes to sleep and requires turning off wifi and turning it on to reestablish contact.

    After recent update to OS on iMac, communication to airport is lost when computer goes to sleep.  To reestablish connection, I need to turn wifi off then on. 

    same problem here.
    i have a time capsule.
    symptoms:
    excessively searching for network
    but more often than not, it cant find the correct netowrk that is correctly stored in keychain
    if i try network assistant opened through safari not finding its page, then it can find the right network after i enter in the password again.  it connects. but only for a few seconds then it loses the connection again.
    the only fool proof workaround for me is:
    1/ shut down time capsule. restart time capsule.
    2/ restart mac with airport turned off.
    3/ after restart manually select the network from the wireless icon in the menu bar
    airport utility is a complete waste of time
    old airport utility is still better.

  • Hp 620 connection randomly lost,after restart sometimes comes back then goes again

    Randomly wireless connection goes away.And says not connected and no connection available.Wireless button stays always white and doesnt respond . After restart sometimes connection comes but then goes again after 1-2 minute.Network adapter looks like works fine.there is no sign on that.but i cant connect to the internet via wifi. I dont know what to do . Please help me to solve this problem

    @ayazgurbanov 
    ‎Thank you for using HP Support Forum. I have brought your issue to the appropriate team within HP. They will likely request information from you in order to look up your case details or product serial number. Please look for a private message from an identified HP contact. Additionally, keep in mind not to publicly post ( serial numbers and case details).
    If you are unfamiliar with the Forum's private messaging please click here to learn more.
    Thank you,
    Omar
    I Work for HP

Maybe you are looking for

  • Open library from AFP share - Unsupported File System - Aperture 3

    Testing Aperture 3 - Exported a project as a library to an AFP (10.5) share. I then tried to reopen the library and got an error Unsupported File System ? Is there possibly a network file system that will support Aperture 3 libraries ?

  • Segment clearing A.c showin the Balances in Trial Balance

    Hi gurus in my client Segment clearing Account is shwoing the balances at company code level and segment leverl trial balances what could be reasons and how do i rectify that early response will be appreciated Thanks

  • Busy cursor on Web

    We are currently moving our application to the Web and find that the Busy cursor style remains an arrow - how can we change this?

  • Radio button question

    I want achieve like this in UI Showing two radio button and grouping then is simple. But what I need is between those radiobuttons (in page direction), I would like to have some other components which makes sense for each selected radio. Radio1      

  • Error while configuring owb respository

    i have oracle 9i v. 9.2.0.1.0 at server side and i have installed client for this at one cleint now whie i have tried to install owb 10g cleint at cleint pc and configure repository at client then it gives error after 94 % like the warehouse builder