I have a new Panasonic TV with wireless capabilities.  When I connect via my AirPort Extreme to Netflix connection is lost after about 5 minutes.  How to rectify.

I have a new Panasonic TV with wireless capabilities.  When I connect via my AirPort Extreme and access  Netflix the connection is lost after about 5 minutes.  I have moved the AirPort, shut down all other computers that use AirPort for wireless connection.  How to rectify?

Andrea Z. wrote:
I have lost my iPhone on August 27, 2013 at 6:15 a.m. when I posizioned it on the strip for the scanner objet of Linate Airport.
After about 10 minutes when I was already on the plane my friend tried to call my number but the phone was already off.
By searching with the "Find my iPhone" system, the device is OFFLINE and does not appear on the map.
I have already written to the lost property office of the Linate Airport but at the moment they do noto have yet responded.
I have already forwarded the complaint to the police.
How can I find out it if my iPhone 5 is offline?
Thanks in advance for the answer.
Andrea Z.
29/08/2013

Similar Messages

  • Phone call becomes garbled to other person after about a minute into call, but I can hear them clearly.  I stood by a tower with full signal and was still hung up on because I couldn't be heard after about a minute.  Please help.

    This is a recent occurrence.  I either initiate or receive calls, and about a minute into them, the person cannot hear me because it becomes so garbled to them, but I can hear them clearly.  I was able to make one call that was completely clear, and that was tonight, but it was one only.  I've done a master reset, but I have not deleted all data, as I'm afraid to do so and lose pictures.  The only other option I supposedly have is to replace the phone.  Please help.  What could this be?

    This is a recent occurrence.  I either initiate or receive calls, and about a minute into them, the person cannot hear me because it becomes so garbled to them, but I can hear them clearly.  I was able to make one call that was completely clear, and that was tonight, but it was one only.  I've done a master reset, but I have not deleted all data, as I'm afraid to do so and lose pictures.  The only other option I supposedly have is to replace the phone.  Please help.  What could this be?

  • Optimal Setup for New Time Capsule with Wireless AC

    I'm curious to see what the hypotehtical optimal setup for my Time Capsule.  I understand that wireless speeds depend on a ton of factors and that part of getting the best connection is just trying different options.  I have a new Time Capsule that's connected to the following devices: iPhone 5S; new MacBook Air with wireless AC; old iMac from 2007; old AirPort Express that only supports b/g and a newish Apple TV that supports wireless N, I believe.  I was connecting to the network (which was not designated with the 5ghz) and I recently chose the option to label the 5ghz.  I'm using that now to stream music with the new iPhone and the Apple TV with no problems, but I have no longer have the option of using the old Airport express because it's an old one.  I'm thinking of just getting a new Airport Express and leaving it at that, but wanted to know if anyone has some thoughts on this.  I'm sure there's a more concise and direct way to ask this question, but my knowledge is pretty limited here.  Thanks in advance.

    The Time Capsule is already set up for optimal performance when you open up the box.
    You can assign a separate name to the 5 GHz network and point devices that are capable to that network. This works well if the device is located close to the Time Capsule.
    But, 5 GHz signals are much weaker than 2.4 GHz signals, so once you move a room or two away, or the signal has to pass through several walls, the 2.4 GHz will be stronger.....and probably faster as well.
    But...your device will try to stay locked on the 5 GHz network since you set it up that way.
    This type of setup may or may not work best for you.  For most users, it is simpler and more effective to use the default settings on the Time Capsule to have both bands use the same network name.
    Then, your wireless devices will automatically connect to the signal with the best quality. Best quality may not be the fastest signal since there are lot of factors involved with signal quality. But, if you think about it a bit more, don't you want to have your wireless device connect to the signal with the best quality?
    Some users swear by assigning a separate name to the 5 GHz band. I'm not one of them, but If it works well for them and they are happy, then there is no reason to change.
    An older AirPort on your network is going to drag down the speeds. You need the new AirPort Express, or better yet an AirPort Extreme if you want to be able to extend the new 802.11ac signal.

  • I have a new MacBook Pro with iPhoto installed.  I edit photos, mainly photo orientation via rotating, but when I go back to run a slideshow the changes weren't saved and the photo is back to vertical...please help...thanks

    I have a new MacBook Pro with Iphoto installed when purchased.  When editing a photo, primarily orientation changes, the slideshow initially displays the photos in proper orientation.  However, after leaving Iphoto and shutting down the computer, and then going back to run a slideshow the photo displays back to its' original orientation, that is, the edit-change was not saved.  Please help...the program information says all edit-changes are automatically save and therefore there is no save command, but my changes are not being saved...thank you for any suggestions...HM

    what version of iPhoto and of the OS?
    Back up your iPhoto library, Depress and hold the option (alt) and command keys and launch iPhoto - rebuild your iPhoto library database
    LN

  • Have new iMac OSx10.8.2, and when I connected my Epson Stylus pro3880, loaded printer drivers, and tried to print, the printer utility opens, then crashes. Any ideas? (it worked fine on my last iMac)

    Have a new imac OSx10.8.2, and when I connected my Epson Stylus pro 3880, loaded print drivers, and tried to print, the printer utility opened and then crashed; happened several times. Any ideas? (it worked fine on my older imac)

    I believe so. the driver version I have is 8.64
    The person gave me the instructions to reset the printing system and I followed it. That's what corrected the printing drop down windows.
    I am also having trouble finding the downloaded icc profiles for the papers I use. I see them in the Color Sync Utility, but not in the drop down window for Color Management. There is a thread on this forum relating to that, but I don't understand how to "copy" the profiles and put them elsewhere.

  • Has anyone successfully connected an AEBS to the new Panasonic TVs with built-in WiFi?  If so, please describe the requirements and process.  Thanks.

    Has anyone successfully connected an AEBS to the new Panasonic TVs with built-in WiFi?  If so, please describe the requirements and process.  (TV subscription is through DirecTV and ISP is TWC.)  Thanks.

    If you wish to use the cellular capabilities of a device, you will need a SIM (unless the carrier uses CDMA which doesn't use SIMs) and you will have to pay a cell carrier. No cell company provides service for free. The only way you will get free Internet is via WiFi to a free and open WiFi access point, as sometimes is offered in public buildings or by some businesses.
    Regards.

  • I have a new MacBook Air with a USB super drive. I put in the DVD and I get nothing. No icon on the desk top and DVD player is no help.  How do I play a DVD or eject the one in now?

    I have a new MacBook Air with a USB super drive. I put in a DVD and I get nothing.  No Icon on the desk top, no help from DVD player. How do I get it to play and how to eject it now that it's in?

    There's a defect. The computer is in warranty so take it in for repair.

  • I know many have this issue but i can't find a solution to the problem. i get message saying insuffisiant disk space in the volume iPhoto library and i have plenty of space available. i have the new macbook pro with retina display.

    I know many have this issue but i can't find a solution to the problem. i get message saying insuffisiant disk space in the volume iPhoto library and i have plenty of space available. i have the new macbook pro with retina display. i have never seen this message before and i have 2 other macbooks and have had many other also. i am assuming this is a problem with the new macbook retina. does anyone know the exact fix to this issue? i have seen many sugestions to try to fix this issue but none have solved the issue for anyone that i can find in the Apple Support Community. thank for looking into this in advance.
    ******A true apple fan********

    Actually your suggestions are the ones that i have tried. i have seen that you have tried to help others with this issue and the only one that i could find that said they found the problem said that it was an ilife update issue and it fixed it and i have no available updates. i know it has to do with something in photo stream because it happens when i create a new library and it is loading the photos but i get the message before i reach the maximum 1000 photos. so i've tried updating, new library(first backing up photos and then deleting them from iPhoto), reinstalling OSX many times, running disc utilities. I called Apple the first day i had this issue and i was the first person to call them for support with the retina display and i actually had it escalated to a senior advisor and we thought we fixed the problem but we did not. i am pretty fluent in dealing with troubleshooting these type of issues and this is the first time i'm reaching out to the community. i figured now that the retina has been out some time now that there would be an obvious answer to this issue. thanks for the quick reply.
    Bebers5

  • Hi everyone, I was wondering if someone can help me.  I recently got my first ever Ipod.  It's the new Ipod Nano 7th Generation.  I have tried to synchronise it with Itunes but it says "Connected, Eject before Disconnecting" but nothing happens.

    Hi everyone, I was wondering if someone can help me.  I recently got my first ever Ipod.  It's the new Ipod Nano 7th Generation.  I have tried to synchronise it with Itunes but it says "Connected, Eject before Disconnecting" but nothing happens.  I have tried uninstalling & re-installing Itunes but this didnt help. 
    Does anyone have any ideas? 
    Thanks for your help.

    I think the problem is that the iPod got set to Manually manage music and videos.  It needs to be set up for automatic syncing again.  Just unchecking that Manually manage music and videos setting does not do it.
    In iTunes 12, select the iPod in iTunes (using the device button), so that you see the iPod's "management" screen.  In the sidebar (along left side of screen), there are two headings (Settings and On My Device).  Under Settings, click on Music.  To the right, you see the iPod's Music screen, where you tell iTunes how to sync songs to the iPod.
    Check the box at the top for Sync Music.  That turns ON automatic syncing for music.  Below that, choose the option to sync Entire music library (assuming your music library fits completely on your iPod).  Otherwise, you can choose the option to sync Selected playlists, artists, albums, and genres and make your selections below.  Then click Apply.

  • I have an iPod nano v4 or 5 and when I connect it to my Hyundai Santa Fe I get an iPod loading error message.  The cable came with the car when I purchased it and the dealer was able to get it to work with his newer ipod.  Please advise.

    I have an iPod Nano v4 or 5 and when I connect it to my Hyundai Santa Fe I get an iPod Loading error message.  The cable works with the dealer's iPod which is a newer model.  The cable came with the car when I purchased it.  Please advise.  Thanks.

    Hi Bander Bunny!
    I have a couple of articles that should be able to help you troubleshoot this issue a little further. You may want to try uninstalling and reinstalling iTunes first. This has to be done in a specific manner, and this article can help you do that:
    Removing and reinstalling iTunes, QuickTime, and other software components for Windows Vista or Windows 7
    http://support.apple.com/kb/ht1923
    Another option is that you may want to try syncing your iPod nano manually. Here's is an article that pertains to manually managing the content of your iPod nano:
    Managing content manually on iPhone, iPad, and iPod
    http://support.apple.com/kb/ht1535
    It's also possible that this issue resides with your iPod nano. Here is a website that will help you troubleshoot the iPod nano:
    Apple - Support - iPod Troubleshooting Assistants
    http://www.apple.com/support/ipod/five_rs/
    Thanks for using the Apple Support Communities. Have a good one!
    -Braden

  • I wiped my ipod classic and then my computer crashed, so i no longer have the songs i purchsed from itunes on my ipod or computer! I have a new computer now with itunes installed, can I get the songs purchased previously from itunes somehow?

    I wiped my ipod classic and then my computer crashed, so i no longer have the songs i purchsed from itunes on my ipod or computer! I have a new computer now with itunes installed, can I get the songs purchased previously from itunes somehow?

    Yes, you can!(:
    STEP 1: Open iTunes
    STEP 2: Navigate to the "iTunes Store". It can be found under the "STORE" tab.
    STEP 3: On the right side of the store there should be a "Quick Links" Section. Click on the "Purchased" link.
    STEP 4: Navigate to the "Music" tab and click on "All Songs". Then at the bottom of the screen there will be a button that says "Download All". Click the button and your songs will be begin downloading!
    NOTE: This will only work with songs that you bought from the iTunes store, if you imported them from a CD, you will have to do it again.
    NOTE: You can also do this with Apps, Movies, TV Shows, and Books.
    NOTE: You may have to sign in with your Apple ID to verify the download.
    Hope this helped! Enjoy your music!(:

  • I have a new PC laptop with Windows 7 and Office 2010. I have an Airport Extreme, and installed Bonjour on my laptop. Bonjour "sees" my printer. When I try to print, the printer lights up -- but doesn't print. anyone have an idea? Thanks Gregg

    I have a new PC laptop with Windows 7 and Office 2010. I have an Airport Extreme, and installed Bonjour on my laptop. Bonjour "sees" my printer. When I try to print, the printer lights up -- but doesn't print. anyone have an idea? Thanks Gregg

    Hi Kelly,
    As someone who has to print from my Mac to a networked printer at home all the time, I can certainly understand how frustrating it must be to have that fail to perform as expected. Let's see if we can get you up and running.
    I would suggest that you troubleshoot using the steps in this article -
    OS X Yosemite: Printing troubleshooting
    Start with the section titled Check the network.
    Thanks for using Apple Support Communities.
    Sincerely,
    Brett L 

  • Have a new PC desktop with 4 hard drives, new c, d and old c, d, My ipad library is in old c, how to get my itune open the right drive, it keeps on open in new c drive.

    Have a new PC desktop with 4 hard drives, new c, d and old c, d, My ipad library is in old c, how to get my itune open the right drive, it keeps on open in new c drive. It said my computer is not authorized. I want to move all the old c to the new c drive, or get the itune to open my old c drive when I log in.

    might be some help on one of these links.
    Windows - Change iPad default backup location
    http://apple-ipad-tablet-help.blogspot.com/2010/07/change-ipad-default-backup-lo cation.html
    Windows - Changing IPhone and iPad backup location
    http://goodstuff2share.wordpress.com/2011/05/22/changing-iphone-and-ipad-backup- location/
    Sync Your iOS Device with a New Computer Without Losing Data
    http://www.howtogeek.com/104298/sync-your-ios-device-with-a-new-computer-without -losing-data/
    Syncing to a "New" Computer or replacing a "crashed" Hard Drive
    https://discussions.apple.com/docs/DOC-3141
     Cheers, Tom

  • I have a new Mac Mini with Lion. I am entitled to a free copy of  Mountain Lion. Where do i download it from?

    I have a new Mac Mini with Lion. I am entitled to a free copy of  Mountain Lion. Where do i download it from?

    http://www.apple.com/osx/uptodate/

  • HT2499 I have a new MacBook Pro with OS X Lion 10.7.4. The DVD player does not have a feature to store film clips. Why? This is useful for my work and I had it on my older computer? Why the loss of capacity?

    I have a new MacBook Pro with OS X Lion 10.7.4. The DVD player does not have a feature to store film clips. Why? This is useful for my work and I had it on my older computer? Why the loss of capacity?

    I cannot recall the DVD player ever being a place to "store" videos - it is simply an app to play videos.
    If your machine is new, then iMovie should be included as the "shrunk" version of iLife is included with Lion (iMovie, Garageband, and iPhoto). However, iMovie is not a place to store videos either - it is a video editor. You import your clips and edit them in order to then burn to a DVD or share via a social media site.
    Have you considered simply dragging the clips to your folder "Movies"? That would be a great place to just store them (please be aware that videos are usually large files, so keep your hard drive space in mind so you keep a minimum free and available for the OS to operate properly):

Maybe you are looking for

  • Cannot open bridge or photoshop

    Followed all instructions to install Photoshop. When I opened the program and went to Bridge, I receive the error message "Could not complete your request because it is not the right kind of document." I have to install CS2 and Photoshop online becau

  • Labrary shows tutorials

    I have been using iTunes for many years, and I have been upgrading numerous times. I just downloaded and installed the latest iTunes, version 10.6.1 for Microsoft Windows 7 x64. Now iTunes will no longer show me my library of music.Instead, it insist

  • Extract date from time stamp

    hi , how to extract DATE from timestamp column thanks

  • LocalConnection and BitmabData

    Hi. I have a promlem with transferring BitmapData from one swf to another by using LocalConnection: //1st swf sending_lc.send("lc_name", "functionName", 1, "2", myBitmapData); //2nd swf receiving_lc.functionName = function(a,b,c){ trace(a);// output

  • Filling Multiple Rows With Text

    I'd like to fill down 10 rows with the text FS1000. This I can do, but then how would I increase the value after the FS by 1 for another ten rows and so on until reaching FS2000. FS1000 FS1000 FS1000 FS1000 FS1000 FS1000 FS1000 FS1000 FS1000 FS1000 F