Wifi doesn't work hands fare with Toyota car sterio or Bose speaker. What is wrong with the wifi on the 4S? Does apple have a fix?

iPhone 4s doesn't work? Help

Same issue here... iphone5S 64GB. It's intermittent. Sometimes the rotation works fine, sometimes it doesn't, but most of the time it doesn't work.
The first time I figured out it wasn't working was when all newly-taken photos and videos were showing up in portrait mode though I always hold in landscape mode when photographing.
Rotation lock is disabled (tried toggling it on and off). Tried recalibrating the compass on a whim, no effect (although my compass seems to always require calibration when it's launched now).
This issue only started happening after upgrading to iOS8. I did a reset/restore through iTunes rather than an OTA upgrade.
UPDATE - power-cycling the phone seems to fix it temporarily.

Similar Messages

My iphone 4 speakers stopped giving me sounds when i play audio or video even while gaming. It works fine when ringing tunes of for voice mails. What is wrong with it?

My iphone 4 speakers stopped giving me sounds when i play audio or video even while gaming. It works fine when ringing tunes of for voice mails, even works fine with headsets. What is wrong with it?

well i'd seriosly say point a hot hair drier at the speakers as water has entered the phone most commonly via the home button but avoid getting it too hot let it cool every 3 minutes after constant drying. Don't worry I have honestly dont this with my iPhone 4 GSM 16GB. For future reference avoid letting it get wet.

TA21328 every time I use Safari I receive a message that says Safari is no longer responding because of a script problem with the website and I must press "continue" for the page to continue. This happens with every website I go to. What is wrong with my

When using Safari I have begun to notice this box appearing as I try to reach any website: "Safari is no longer responding because of a script on the webpage and then it lists what ever web page I have tried to reach. It then asks me if I want to "stop" the script or allow it to continue. I must "continue" it in order to reach my web page/ If I press "stop" it just keeps coming back and back and I can't continue. What is wrong with my computer or Sarari or both?

chick --
Does it mention "Slow Script?

What's wrong with my sintax?

The code:
var arraySections = ["section_Btn_nosContigo", "section_Btn_nosSomos", "section_Btn_nosAoVivo", "section_Btn_nosTemos", "section_Btn_nosVivemos"];
var sectionActive = sym.getPosition(arraySections);
if (sectionActive > 2499) {
sym.getSymbol(sectionActive).playReverse("mouseout");
I think it's self-explanatory, but it doesn't work...

Okay, from this description it's clearer what you're going to achieve. The code should be in a click handler for each button.
When all button are on the same level which is good them you search for them as:
var buttons = sym.getParentSymbol().getChildSymbols();
Otherwise you'll need to go recursively through your composition:
function contains(name, array) {
   for (var i = 0; i < array.length; i++) {
      if (array[i] === name) {
         return true;
   return false;
    function findButtons(symbol, array) {
        var children = [];
        var childSymbols = symbol.getChildSymbols();
        for (var i = 0; i < childSymbols.length; i++) {
            if (contains(childSymbol.getSymbolTypeName(), array)) {
                children.push(childSymbols[i]);
            } else {
                var innerResult = findButtons(childSymbols[i], array);
                for (var j = 0; j < innerResult.length; j++) {
                    children.push(innerResult[j]);
        return children;
var buttons = findButtons(sym.getComposition.getStage(), ["section_Btn_nosContigo", "section_Btn_nosAoVivo", "section_Btn_nosTem os", "section_Btn_nosVivemos"])
And finally you traverse through buttons found and play either section_enter or section_exit
buttons.forEach(function(button) {
          if (button === sym) {
                    button.play('section_enter');
          } else {
                    button.play(''section_exit);

My I pad 3 constantly loses my wi fi signal. Does apple have any plans to correct this or should I return it. This was not an issue at all with the original one.

My new iPad 3 constantly loses the wi fi signal. Does Apple have any plans to correct this issue or should I return it. I had no problem with my original I pad. Both are in the exact same location in my house. I'm finding this very annoying and disappointing and am being forced to us my 4 g data plan

You may already have tried this, but before you completely give up, I'd check your home router software and also reset the router. I haven't seen this particular issue arise on these forums with new iPad devices, so perhaps it has to do with outdated software or configuration on the router not playing well with the new device....

My Wifi doesn´t work. The Wifi icon on top menu bar states there is no hardware connected. How can I resolve this as previously Wifi connection worked perfectly. Is this something that to do with the computer hardware? Please advise.

My Wifi doesn´t work. The Wifi icon on top menu bar states there is no hardware connected. How can I resolve this as previously Wifi connection worked perfectly. Is this something that to do with the computer hardware? Please advise.

SkyDaughter29 wrote:
My current situation: I have soooo many texts on my iphone and I haven't deleted many because I need the information contained in them for future reference and for legal purposes. I would really like to find a means and way to save them other than on the phone itself. I've done searches for various apps yet I'm not finding what I think I would need. It appears Apple does not sync the texts between the iphone and my MacBook Pro.
Try the computer apps PhoneView (Mac) or TouchCopy (Mac & PC):
http://www.ecamm.com/mac/phoneview/
http://www.wideanglesoftware.com/touchcopy/index.php
Best of luck.

Wifi doesn't work with OSX 10.8

wifi doesn't work any more with OSX 10.8

Hi, this has worked for a few...
Make a New Location, Using network locations in Mac OS X ...
http://support.apple.com/kb/HT2712
old... http://docs.info.apple.com/article.html?artnum=106653
Make a New Location, Using network locations in Mac OS X ...
http://support.apple.com/kb/HT2712
10.7…
System Preferences>Network, top of window>Locations>Edit Locations, little plus icon, give it a name.
10.5.x/10.6.x/10.7.x instructions...
System Preferences>Network, click on the little gear at the bottom next to the + & - icons, (unlock lock first if locked), choose Set Service Order.
The interface that connects to the Internet should be dragged to the top of the list.
Instead of joining your Network from the list, click the WiFi icon at the top, and click join other network. Fill in everything as needed.
For 10.5/10.6, System Preferences>Network, unlock the lock if need be, highlight the Interface you use to connect to Internet, click on the advanced button, click on the DNS tab, click on the little plus icon, then add these numbers...
208.67.222.222
208.67.220.220
Click OK.
Also, turn off IPv6:
System Preferences » Network » AirPort » TCP/IP tab » Configure IPv6
Or whatever Interface you use.

Wifi doesn't work with IOS 7

Hi, I installed on my iphone IOS 7 but now wifi doesn't work. It doesn't find any wifi connections around me. Please help me! What can I do?

My wifi had no problem connecting to our home wifi prior to the IOS 7 update, but since updating this morning it's not working. My phone will try to connect to wifi, but then I get the "Unable to join the network" message. I tried resetting network settings, but that did not solve it. I tried @bam11's suggestion of being in airplane mode first, but still no luck. I've had my phone open to the Wi-Fi page, and saw it connect a couple times for the slightest second, but it disconnected just as fast. My son as the exact same phone (4s) and he's connecting just fine! Any other suggestions? I'm afraid to hard reset my phone.

Since update extended wifi doesn't work

I updated my express extreme as required. Since my airport express that I use to extend my wifi doesn't work anymore. I did a reset and when I try to configuration it keeps telling me that an error has occurred and that I should try again.

I reset modem and router. Still have the same issue. I have a laptop connected to the network as well as a PS3. Both are working great. Did a Speedtest app test on iphone. With 3g it was working good. When i switched to wifi, it was trying to get the ping test accomplished, and could not. it was stuck in the ping test at 0% for a long time and never progress.

M3800 Developer Edition: wifi doesn't work after sleep

I have an M3800 Developer Edition (2015 model). Ubuntu is factory-installed 14.04, with hardware enablement stack installed. Recently (past 1-2 weeks) wifi doesn't work after sleep (lid closed or open doesn't matter), and only rebooting gets in back. Tried rmmod and modprobe with no success. Has anyone else seen this, and/or are you aware of any open bug(s) for this?
Relevant ouput:
lsmod when problem exists:
iwlmvm                217725 0
mac80211              652718 1 iwlmvm
iwlwifi               179412 1 iwlmvm
cfg80211              494362 3 iwlwifi,mac80211,iwlmvm
rfkill list when problem exists:
1: phy0: Wireless LAN
        Soft blocked: no
        Hard blocked: no
3: hci0: Bluetooth
        Soft blocked: no
        Hard blocked: no
rmmod the above, then modprobe iwlwifi. Does not fix problem, only rebooting does:
May 4 08:23:14 jonathan-m3800 kernel: [69089.189614] cfg80211: Calling CRDA to update world regulatory domain
May 4 08:23:14 jonathan-m3800 kernel: [69089.192181] cfg80211: World regulatory domain updated:
May 4 08:23:14 jonathan-m3800 kernel: [69089.192184] cfg80211: DFS Master region: unset
May 4 08:23:14 jonathan-m3800 kernel: [69089.192185] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
May 4 08:23:14 jonathan-m3800 kernel: [69089.192187] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
May 4 08:23:14 jonathan-m3800 kernel: [69089.192188] cfg80211:   (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
May 4 08:23:14 jonathan-m3800 kernel: [69089.192189] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm), (N/A)
May 4 08:23:14 jonathan-m3800 kernel: [69089.192190] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
May 4 08:23:14 jonathan-m3800 kernel: [69089.192191] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
May 4 08:23:14 jonathan-m3800 kernel: [69089.204141] Intel(R) Wireless WiFi driver for Linux, in-tree:
May 4 08:23:14 jonathan-m3800 kernel: [69089.204143] Copyright(c) 2003- 2014 Intel Corporation
May 4 08:23:14 jonathan-m3800 kernel: [69089.204414] iwlwifi 0000:06:00.0: irq 48 for MSI/MSI-X
May 4 08:23:14 jonathan-m3800 kernel: [69089.204904] iwlwifi 0000:06:00.0: loaded firmware version 25.228.9.0 op_mode iwlmvm
May 4 08:23:14 jonathan-m3800 kernel: [69089.207709] iwlwifi 0000:06:00.0: Detected Intel(R) Dual Band Wireless AC 7260, REV=0x144
May 4 08:23:14 jonathan-m3800 kernel: [69089.207790] iwlwifi 0000:06:00.0: L1 Enabled - LTR Enabled
May 4 08:23:14 jonathan-m3800 kernel: [69089.208150] iwlwifi 0000:06:00.0: L1 Enabled - LTR Enabled
May 4 08:23:14 jonathan-m3800 kernel: [69089.392408] ieee80211 phy0: Selected rate control algorithm 'iwl-mvm-rs'
May 4 08:23:14 jonathan-m3800 NetworkManager[901]:    SCPlugin-Ifupdown: devices added (path: /sys/devices/pci0000:00/0000:00:1c.2/0000:06:00.0/net/wlan0, iface: wlan0)
May 4 08:23:14 jonathan-m3800 NetworkManager[901]:    SCPlugin-Ifupdown: device added (path: /sys/devices/pci0000:00/0000:00:1c.2/0000:06:00.0/net/wlan0, iface: wlan0): no ifupdown configuration found.
May 4 08:23:14 jonathan-m3800 NetworkManager[901]: <info> (wlan0): using nl80211 for WiFi device control
May 4 08:23:14 jonathan-m3800 NetworkManager[901]: <info> (wlan0): driver supports Access Point (AP) mode
May 4 08:23:14 jonathan-m3800 NetworkManager[901]: <info> (wlan0): new 802.11 WiFi device (driver: 'iwlwifi' ifindex: 4)
May 4 08:23:14 jonathan-m3800 NetworkManager[901]: <info> (wlan0): exported as /org/freedesktop/NetworkManager/Devices/2
May 4 08:23:14 jonathan-m3800 NetworkManager[901]: <info> rfkill5: found WiFi radio killswitch (at /sys/devices/pci0000:00/0000:00:1c.2/0000:06:00.0/ieee80211/phy0/rfkill5) (driver iwlwifi)
May 4 08:23:16 jonathan-m3800 ModemManager[852]: <warn> Couldn't find support for device at '/sys/devices/pci0000:00/0000:00:1c.2/0000:06:00.0': not supported by any plugin
lspci:
06:00.0 Network controller: Intel Corporation Wireless 7260 (rev 6b)
After reboot:
lsmod |grep -i iwl:
iwlmvm                217725 0
mac80211              652718 1 iwlmvm
iwlwifi               179412 1 iwlmvm
cfg80211              494362 3 iwlwifi,mac80211,iwlmvm
rfkill list after reboot:
0: nfc0: NFC
        Soft blocked: no
        Hard blocked: no
1: phy0: Wireless LAN
        Soft blocked: no
        Hard blocked: no
2: hci0: Bluetooth
        Soft blocked: no
        Hard blocked: no

Wi-Fi still not reconnecting after sleep
http://forums.macrumors.com/showthread.php?t=1229591

Why the wifi doesn't work after the upgrade to iOS 5?

The problem is that after the upgrade to iOS 5 the wifi doesn't work. I mean, iPad is connected to the wifi but not to the internet and also the connection on the other device doesn't work. So I had to turn off the router and then turn it on.

Try a hard reset first to see if that does any good. To do this, press and hold both the Sleep/Wake and Home buttons together long enough for the Apple logo to appear.
If no luck with that, you'll need to manually connect your iPod to your iTUnes library in recovery mode using the instructions in the Apple support document below. Doing so will allow you to bypass the passcode and restore the iPod.
iOS: Unable to update or restore
B-rock

WiFi doesn't work after repair

Hi,
Today I received my iMac 27" back from repair. It had the screen and the optical drive replaced since both were defect.
According to the papers, nothing else has been replaced, but WiFi doesn't work now. I can't connect to my own network (Time Capsule), and only very few networks show up in the list -- quite often, mine is not there, and sometimes there are none at all. Checking with a laptop right next to the iMac, I can see plenty of networks (and my own network works fine).
Could the Apple guys accidentally have screwed up something? I thought about looking at the antenna connectors on the AirPort card (a guide is available on iFixIt), but it seems quite complicated (and I don't have the necessary screwdrivers).
Thanks,
Michael

And if it under warranty you do not want to open it up and void your warranty.
When the authorized tech installed new memory modules in my 09 Mac mini, he shorted out my wireless card and they had to order a new one and install it. I would take it back and have them figure out what is wrong.

WIFI doesn't work on startup

When I turn on my dad's iMac (Mid July 2010, iMac) the WIFI doesn't work. When I click the WIFI icon on the menu bar is says somthing to the effect of you don't have WIFI installed. When I restart it works. this happens every time.
What do you think is wrong? do I need to take the iMac in to an Apple store?

Hi,
First, my wlan card was unknown by w7 (unknown device and I had install all the others drviers). So, because I don't know what card was in the L630, I downloaded the Atheros and the Broadcom wlan drivers.
When I refresh in the device manager, I tell w7 to automatically find the driver (in drivers folder and in its subdirectory).
w7 find a Broadcom card, install the driver (with the error message : file not found without any name of file) and shows in the network section of the device manager a Broadcom 802.11n card, but didn't shows the model (I think its a 43xx). Thre isn't any other unknown device in the device manager, all seems right.
I also try to install it with the Grand Administrator account : same result !!!!!!!!!
I have try with the Atheros drivers (just in case) but w7 tells me that there isn't any drivers found for my card (so I think its a broadcom)
When I press Fn + F8 key nothing happens (the led of the wifi stay orange) and the hotkey bar doesn't drop down.
Thats why I wish to rinstall the hotkey utility, but It doesn't exist for other OS than XP....
I try to install it (the XP hotkey utility) but its make an error : common module not found
I try to install common module then the hotkey utility, but I get the same error : common module not found
I'm agree with you xver, install a fresh w7 64 bits then all the drivers shoud not be such problematic, I do this fort one Tecra A7 and One Aspire One 751, they works perfectly, but they where all of them under XP ......
Next step :
I must confirm (to my self too) if the F8 key work properly (by trying to start w7 into safe mode),
remove any trace of the common module and the hotkey utility from the registry,
remove the broadcom and atheros wlan driver and delette any trace in the registry,
go in a church and light a candle for miracle ?

My wifi doesn't work if I keep my data services off

Hey. My wifi doesn't work ( i cant surf) with data services off. and if i keep data services on that is if my blackberry services..and surf the webpages ..my balance gets decducted..but i have unlimited blackberry plan. and on the first place my balance shouldnt be deducted because i am using my wifi ( in case my page gets open through wifif not blackberry services) and if i am using my balckberry internet either way my balances shouldnt get decducted. i have torch 9800 and my service provider is VODAFONE INDIA please help me out cus i cant use my wifi..without bbm services..

knottyrope wrote:
What device and OS are you using?
With my torch 9860 on OS 7.1.0.402 i can still have BBM and surf with data services off and wifi on.
Yes, this is something [NEW]... we know that.
(**Edit, sorry I left out the word new earlier.)
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!
3. Install free BlackBerry Protect today for backups of contacts and data.
4. Guide to Unlocking your BlackBerry & Unlock Codes
Join our BBM Channels (Beta)
BlackBerry Support Forums Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

Wifi doesn't work very well since ios6 download. Worked fine before update, help please

wifi doesn't work very well since ios6 download. Worked fine before update, help please

I reset modem and router. Still have the same issue. I have a laptop connected to the network as well as a PS3. Both are working great. Did a Speedtest app test on iphone. With 3g it was working good. When i switched to wifi, it was trying to get the ping test accomplished, and could not. it was stuck in the ping test at 0% for a long time and never progress.

Wifi doesn't work hands fare with Toyota car sterio or Bose speaker. What is wrong with the wifi on the 4S? Does apple have a fix?

Similar Messages

Maybe you are looking for