Will a 3" disk (containing an antenna driver) work in a MacBook internal disk drive?

Will a 3" disk (containing an antenna driver) work in a MacBook internal disk drive?

Slot loading machines can only handle 4.72" (120mm) standard CD disks. Any other size will simply get stuck in the drive and be really hard to get out. Your best bet is to find someone with a tray loading CD drive and have them copy the driver over to a USB thumb drive or a standard size CD.

Similar Messages

  • Will this hard-drive work in a MacBook?

    Will this hard-drive work in a MacBook?
    http://www.lambda-tek.com/componentshop/index.pl?prodID=1075517
    Thanks,
    Steve.

    Thanks for the quick replies...
    How about this one:
    http://www.misco.co.uk/productinformation/~Q966946~/SEAGATE%20MOMENTUS%202.5%201 00GB%207200RPM%20SATA%2F150%208MB.htm
    Is that the right one? How do I tell?
    Cheers,
    Steve.

  • I don't want to spend 60  pounds on a apple cd hard drive, so will any cd hard drive work with a macbook air?

    I don't want to spend 60  pounds on a apple cd hard drive, so will any cd hard drive work with a macbook air?

    As you quote the price in 'Pounds' I'm assuming you are in the UK!
    You might want to consider one of these from Amazon.  I have one on my MBA and it works well.

  • My os x is running in an external disk, how do i go back to using the internal disk

    my os x is running on my external disk and I want to reverse and use my internal disk instead. I also cant seem to push through to internet recovery if i remove my external disk and would want to reinstall os x through internet recovery. im only seeing the globe/earth revolving but loading status seems freezing. pls help plssssssss

    iwantchange wrote:
    my os x is running on my external disk and I want to reverse and use my internal disk instead. I also cant seem to push through to internet recovery if i remove my external disk and would want to reinstall os x through internet recovery. im only seeing the globe/earth revolving but loading status seems freezing. pls help plssssssss
    If you installed OS X Mountain Lion (per your signature) to your external drive, you should be able to restart your Mac Mini while pressing/holding the Option/Alt key and selecting the Recovery HD - 10.8.5 in the startup manager. This boots you into the external drive's Recovery System (different than Internet Recovery). From the OS X Utilities Menu, you can use Disk Utility to "clone" both your external Macintosh HD and its Recovery HD to your internal drive.
    First, back up your internal drive unless you don't need anything on it.
    Restart your Mac Mini into the Recovery System on the external drive using the Option/Alt key and selecting the external drive's Recovery HD.
    Select Disk Utility and erase your internal drive's Macintosh HD.
    Stay in Disk Utility and select your Macintosh HD on your external drive.
    Click the Restore tab. Your external drive's Macintosh HD should be displayed in the Source field.
    Click and drag your internal drive's Macintosh HD to the Destination field. Note: This partition needs to be the same size as or greater than the Source.
    Click the Restore button. This will block-copy the external drive to your internal drive.
    After the restore completes, both your internal and external drive will be labeled the same (e.g. Macintosh HD).
    Quit Disk Utility and at the OS X Utilities menu, click on the Apple logo (upper left corner) and select Startup Disk. Select your internal drive and Restart. This will restart your Mac Mini using your internal drive.
    Good luck

  • Can I directly back up my itunes files to an external hard drive? To save my internal hard drive.

    Can I directly back up my itunes files to an external hard drive? To save my internal hard drive.

    If your intent is to remove the songs from your computer's internal drive you don't want to manually move them because iTunes won't know where they are. The safe way to perform this move is to start iTunes, open iTunes Preferences, and select the advanced tab. Plug in the external drive if it isn't already.
    Using the picture above as a guide, (1) click on the Change button and select your external hard drive. (I created a Music folder on my external drive because I keep more than just music on it). 2) Click to put checkmarks in the boxes marked (2) and (3) and then click on the Ok button. This sets the stage for copying the music to your external drive and will make sure all your new music is put there as well.
    The last step is to select the File menu, choose Library, and then Consolidate Library. This actually moves the music. Depending on how large your music library is and the speed of your external drive this will take a few minutes to a few hours.

  • Can Time Machine back on one external hard drive (work files) to another external hard drive (back up)?

    Can Time Machine on a Mac Book Pro 10.5.8 back up an external hard drive (working files) to another external hard drive (WD dual backup)?

    I have Mountain Lion here ready to upgrade, but I'm scared of what will happen - there's always something when you upgrade, but I guess that's for a different post!
    Yes, it's a different post, but let's make a comment any way.
    Your power pc apps will not work when you upgrade to Mountain Lion. You will have to replace all the apps you use.

  • My 2008 Macbook Pro logic board failed...am I still able to copy that hard drive onto my 2011 Macbook Pro hard drive?

    My 2008 Macbook Pro logic board failed...am I still able to copy that hard drive onto my 2011 Macbook Pro hard drive?

    What you can do is to extract the hard drive from your old computer, put it in an enclosure and connect it to your newer computer, so you can restore your data.
    It's not too difficult to do it yourself, but if you think you will do something wrong, take it to a store where you can get your data restored

  • Time machine will not backup to empty external hard drive after replacing Mac's internal hard drive and restoring

    First - I live in a tiny fishing village in Belize, so getting support here is virtually non-existent. There is no one else in my village who even uses a Mac. Recently, my hard drive in my 2012 Macbook Pro 13" went bad (said it suffered a "shock"?) and I was traveling to Cozumel, Mexico, so had it replaced there. We used an external hard drive backup to restore the data to it's last time machine backup (October of 2014). Everything was working fine, until I returned home, added some pictures, and wanted to do a fresh backup. Now, time machine will start the backup, but gets about 113,000 of 181,000 done, and it locks up. I can do nothing - everything freezes, and I have to eventually power down the computer. I even tried deleting the old backup from the external hard drive, erasing it completely, and reformatting the external hard drive using disk utility. Still locking up. It is a 5 GB external hard drive, so space shouldn't be an issue, and it was backed up to the same external hard drive previously with no issues. I'm still running Mavericks, and don't want to try to upgrade to Yosemite until I can be sure I have a backup of my old data and pictures. I am a writer, and use that to make my meager living LOL
    I'm stumped. I've looked through the files endlessly but can't find anything similar to my issue. Any suggestions? I know just enough to be dangerous, and don't want to lose everything we worked so hard to retrieve when my hard drive crashed last month.
    Thanks!

    SMH5206 - I tried letting it sit and crank overnight twice. First time I thought it was my error causing it to lock up. Now I know better. I haven't changed any of my time machine settings - and actually never used time machine regularly. Only reason I had a fresh backup from last Oct was because I did one before I upgraded to mavericks. Everything worked fine then - and we used that to restore when the hard drive crashed and was replaced. I have actually deleted hundreds of pictures off my hard drive and one entire user, so it should actually be a much smaller backup - so if it did it before on the same external hard disk, I don't understand why it won't now.  I'm really confused.
    Kahjot - the external hard drive is the same one I backed up to previously - and I have completely erased it and reformatted, and the information I'm backing up now is less, so there should be no reason why it doesn't have enough room now, when there is actually less information on my current hard drive (see my reply to SMH5206). When I plug it in, it says it is a 500.07 GB WD "My Passport"
    I've even tried to have time machine only backup certain files, and not the whole thing. Still locking up.
    I'm sure it's my error somewhere, - I just don't know how or where

  • Will this hard drive work with my macbook?

    I have a late 2006 Core Duo Macbook. I was wondering if I could use this hard drive with my macbook, it's a 7200 rpm 200 gig hard drive. Btw I mean internal not external. Does the macbook have a limit on how big of a hard drive you can use? Would this hard drive work at 7200 rpm in the macbook?
    http://www.newegg.com/Product/Product.aspx?Item=N82E16822145160

    Hi.
    The drive will work perfectly in your macbook. Two weeks ago i was also thinking about buying the Hitachi Travelstar 7k200.
    But afterwards i bought this one:
    http://www.newegg.com/Product/Product.aspx?Item=N82E16822136123
    The WD Scorpio 250GB. Off course it´s not as fast as the Travelstar. But for me three things we´re quiet nice about this harddrive: the noise (it doesn´t make anyone) and the price (got it for 150 euro) and it consumes way less power (means better battery life).
    http://www.storagereview.com/WD2500BEVS.sr?page=0%2C7
    BTW: It really doesn´t make any noise.
    So just in case you´re still unsure whether to buy the Hitachi or anything else. But if you want the fastest notebook HD you can get today, buy the Hitachi.
    Have a nice day and fun with your new HD!
    Message was edited by: dahack

  • Unable to clone hard drive from early 2008 macbook using disk utility, error 254

    Attempting to upgrade my early 2008 Macbook hardrive, currently 160gb to a 250gb drive.  Using Mac Disk Utility to restore from drive in computer to the 250 gb drive currently attached via usb.  Receiving error, Could not validate source, error 254.  I know this process works as I recently upgraded our MacbookPro to 1 TB.  The 250gb drive I am attempting to clone to is from that computer.  I have formated the 250gb drive, mac osx extended journaled, guid.  Not sure how to proceed.  Suggestions?

    To transfer your current hard drive I like the free application Carbon Copy Cloner. It makes a bootable copy of everything on your hard drive http://www.bombich.com/index.html You'll need a cheap SATA external hard drive case. Put the new drive in the case then format and partition the new drive and clone your old drive to the new one. Check that it's set up right by booting up from the external drive. Then replace your old hard drive with the new one and put your old one in the external case.

  • Will this Hitachi internal hard drive work with my macbook?

    I have a Hitachi 250Gb SATA 3.0Gb/s internal hard drive left over from my PC. the info for the drive is here:
    http://www.hitachigst.com/tech/techlib.nsf/products/Deskstar_T7K250
    It is an older drive, but it says it is compatible with Mac OSX 10.3 and the Power Mac G4. If I get one of those internal hard drive enclosures that use USB cable to connect to computers, will it show up on my macbook and be useable? If so, which should I use, firewire or USB?

    I think you've misunderstood, I know it's not a hard drive to put into the computer; I want to use it as an external drive using something like this with the 3.5" SATA hard drive:
    http://www.circuitcity.com/ssm/AcomData-Samba-Enclosure-Obsidian-SMBXXXU2E-BLK/s em/rpsm/oid/206485/catOid/-18021/rpem/ccd/productDetail.do
    and using a USB cable to connect to my macbook

  • I downloaded all into a new external hard drive because my internal hard drive was failing. then got internal hard drive replaced by Apple Store. Now when I try to sync IPAD or IPhone to IMAC, photos will not transfer. Why? What shall I do?

    Trying to download photos from IPHONE, IPAD to IPHOTO in IMAC after installing new hard drive. Before getting new Hard drive, I downloaded all into external hard drive. photos did not download!

    Trying to download photos from IPHONE, IPAD to IPHOTO in IMAC after installing new hard drive.
    How did you import the photos to iPad and iPhone?
    If the photos have been synced to the iPhone and iPad using iTunes, you cannot sync them back.
    See this document:  http://support.apple.com/kb/HT4236
    You can't reimport pictures synced from your computer to your device back to your computer. You can only import pictures in the Camera Roll or Saved Photos from your device to your computer. If you need to retrieve synced photos from your device:
    If your photos are not in the Camera Roll on your devices, save them to the Camera Roll, share them to the Photo Stream, mail the photos, or, if you have iPhoto on the devices, use iTunes Photo Sharing.
    http://help.apple.com/iphoto/iphone/2.0/?handbuch#blnkee26bc1
    Save photos to your computer using iTunes
    Connect your iOS device to your computer.
    Tap a photo, album, event, web journal, or slideshow and tap Share> iTunes.
    Tap Selected, or change the photos you want to save (if you are saving a slideshow skip to step 4):
    Select different photos: Tap Choose Photos, tap one or more photos, and tap Next.
    Select a range of photos: Tap Choose Photos, tap Range, tap the first and last photos in the range, and tap Next.
    Select all the photos in an album or event: Tap All.
    In iTunes, click the button for your device and click Apps at the top of the window.
    Below File Sharing, select iPhoto (in Apps).
    Select the Shared Photos folder under iPhoto Documents.
    Click Save To and select the location on your computer where you want to save the items.
    To view your photos, go to the Finder and look in the location you selected above.

  • Incredibly slow MacBook, Internal Hard Drive issues...

    Good morning everybody! I'm apologize if this post is extremely wordy...
    I am extremely baffled by a particular issue with a MacBook 2.0GHz C2D which belongs to a friend of mine. The warranty is expired.
    _Brief history:_
    Several months ago, this MacBook could not find a bootable volume. The drive would not mount when booting from an external FireWire hard drive. It would not mount when the MacBook was put in Target Disk Mode and connected to another Mac. When booting from an external USB hard drive or with my MacBook Pro connected to the MacBook via Target Disk Mode, the MacBook booted up quickly. I came to the conclusion that the internal hard drive must have failed and needed to be replaced. Ultimately, the data was not recoverable from this drive.
    I then proceeded to swap out the defective Apple OEM Seagate hard drive with a known working Apple OEM Fujitsu hard drive. When booting from the Leopard Install DVD, the MacBook would boot incredibly slow, but would finally reach the Installer Language screen. When proceeding to install Leopard, the drive would take a very long time to have data written to it, and ultimately the install failed. I removed the new hard drive from the MacBook and placed it in an external USB enclosure, attached it to the MacBook and booted from the Leopard Install DVD. Leopard would install successfully. I removed the hard drive from the enclosure and reinstalled it the MacBook. When booting from the freshly installed OS, the MacBook would take a very long time to boot. The MacBook is extremely slow!!!
    I checked the Activity Monitor to ensure CPU & System Memory Usage was not going crazy. All Processes where normal with adequate CPU & Memory headroom.
    I took the MacBook apart thinking that the SATA Controller Cable might be loose. No, it was firmly in place. I reassembled the MacBook and booted it up again. Still incredibly slow!
    Finally, after several reboot attempts, the MacBook would book up quickly and operation was perfect. I applied all updates and continued testing the MacBook with great success. Gave my friend his MacBook back and he was grateful.
    _Now for the kicker..._
    My friend brought me his MacBook a week ago complaining that the MacBook was operating extremely slow (much like when I was initially testing it before). I verified the MacBook was slow when I tried using it. I tried several reboots and then it would get stuck on the gray Apple with spinning gear.
    I tried booting into Single User Mode, but it gets stuck on "Waiting for root device"
    I put the MacBook in Target Disk Mode and connected it to my G5 2.0GHz Dual Core. The hard drive would mount quickly on the G5 and I used Disk Utility to create a Restore Image. The disk operation would perform normally and the image would be created successfully.
    I then partitioned the MacBook's hard drive when connected to the G5, ejected and proceeded to attempt OS reinstall. No dice! The hard drive is not even detected by the Disk Utility on the Leopard Install DVD.
    Finally after several reattempts, the hard drive is recognized, but is extremely slow when trying to reinstall...and again, ultimately install fails. Using Disk Utility from Leopard Install DVD, the hard drive fails to unmount when I try formatting.
    I don't have Apple Hardware Test disc for the MacBook or Apple Service Diagnostics disc for this model. Running TechTool Pro shows hardware to be okay, disk controller onboard the Fujitsu drive is okay, but running SMART & Surface Scan takes a long, long time (which I'm certain will ultimately error out). Running Drive Genius takes a long, long time as well.
    Conclusion:
    I think the SATA Controller Cable is defective. I can't think of anything else that would cause disk errors or performance issues like this. Your input is truly appreciated!

    Even though no one responded to my post, I thought I'd share the resolution with the entire Apple community. I hope this information will be helpful to some of you with MacBooks or MacBook Pros that may be running painfully slow or may be exhibiting hard drive issues because your machine won't recognize the boot drive or fails to properly boot on a perfectly healthy S.M.A.R.T. verified hard drive. It just might be the hard drive connector/cable. Here it goes...
    I visited my local Apple Retail Store and asked a "Genius" at the Genius Bar about this issue and told him my thoughts about a possible failed hard drive connector/cable. First, he didn't even know what a hard drive connector was! Then, he arrogantly stated that he never heard of such a thing and that these cables never fail. Finally, he blatantly dispelled this as a possibility.
    On the contrary with my experience, I have had many failed PATA controller cables that required replacement when supporting the desktop PC's at work. I have personally owned and supported many Apple manufactured laptops and desktops and have never encountered this issue on a Mac...until this MacBook!
    So, after looking at the Service Manual for the MacBook, I went over to my local Apple Authorized Service Provider and purchased the Hard Drive Connector Apple Part #922-7579. I replaced the original cable, reassembled and proceeded to boot the MacBook with the Leopard DVD installer. The Fujitsu drive was immediately recognized and was able to be formatted and Leopard installed without incident. The MacBook boots off the internal hard drive as normal again and works nice and fast again.
    Thank you all for your time!
    :D

  • Can i use seagate goflex 3tb external hard drive for 2010 27" imac internal hard drive replacment if i take it out of the goflex case.do i need to format it before installation due to it allready having goflex software on it from manufacturer.

    i have 3tb seagate goflex external hard drive.its brand new in package.i took it out of case and deleted partitions that were created by manufacturer.so now i have 2800 gigs.its formatted ntfs.will it work for late 2010 27" imac internal hard drive replacement.i found a apple repair place that will charge me 50$ to swap drives for me assuming i have the drive.i will have to install leopard myself at this price.i dont want to have to pay for anything other than the swap.will this hard drive work with this format or do i need to format it differently.

    Hello
    formatted ntfs
    NTFS format not work on mac system , need to be formatted as Extended Mac os Journaled format and partition table need to be GUID
    how to do that in video
    HTH
    Pierre

  • Can I back up an external hard drive as well as my internal hard drive?

    Hi,
    I have an Intel Core Duo iMac with a 320GB internal hard drive. I have a 500GB Digital Western external hard drive attached via firewire where I store my iTunes library and iPhoto library. I also use this drive for Time Machine to back everything up, this drive is unpartitioned.
    Being stupid, I have only just realised that my Time Machine is not backing up the iTunes and iPhoto libraries as they are on the same drive as my Time Machine back ups. I do however keep a copy of the iTunes and iPhoto Libraries on another external hard drive (WD My Passport 320GB) just in case.
    To back everything up, (Both internal and external hard drives) I intend to buy another external hard drive as my sole hard drive for Time Machine backups.
    My question is, am I going about this in the right way? What size drive should I get? I was thinking 1TB but at the moment money is tight so 500GB might be all I can afford, will this be enough to back everything up? considering not all the drives are full.
    Thanks.

    Given you have 640gb total space, and the default TM backup mode is "Full" probably would not take too long to completely fill a 500.
    I just bought an (internal) 1tb on Amazon gold box for under 80$.
    Not sure what deals OWC is currently offering.
    Given many of the 500gb externals on amazon are running around 100$, for as little as 17$ more, you can go to 1tb.
    add another 20 to that, and get 1-1/2tb external.
    1tb external for 117:
    http://www.amazon.com/Western-Digital-Essential-External-WDH1U10000N/dp/B000VZCE UI/ref=pdbbs6?ie=UTF8&s=electronics&qid=1239974063&sr=8-6
    1tb external for 125.
    http://www.amazon.com/Seagate-FreeAgent-External-ST310005FDA2E1-RK-Silver/dp/B00 1FWEETK/ref=pdbbs_sr2?ie=UTF8&s=electronics&qid=1239974063&sr=8-2
    or a 1-1/2 tb for 140:
    http://www.amazon.com/Seagate-FreeAgent-External-Drive-Silver-ST315005FDA2E1-RK/ dp/B001FWCB7C/ref=pdbbs10?ie=UTF8&s=electronics&qid=1239974063&sr=8-10

Maybe you are looking for

  • Allowing user to click check boxes in any order

    Hi, I'm using Captivate 5.5 to create a training session with our software. On a particular page, our trainer wants me to instruct the user to click every check box on a page. Since there are 10 check boxes, I would like to let the user click all the

  • How to using variable in log file name on ODI 10.1.3.5?

    Hi, how can i put a my variable into my log file name? now I use this syntax --> ExRate_<%=odiRef.getSysDate("MMddyyHHmm")%>.log. But I have a variable for example #server, the value = "oracleProd" and i want to put the variable value into my log fil

  • IDVD and External DVD burner

    I'm currently working on a DVD for a wedding scheduled for Saturday. The DVD works great on the Mac and PC, however, when attempt to play it in a DVD player playing to a TV the music is choppy during the transitions (dropplet). By the way, my superdr

  • Allocation Base report.

    Dear Team, I have to fect a report based on Internal order/cost center/Cost sheet wise. The  required logic will be like below: the report should show the Pool, Target, and Total amount% Through which will come to know the total all balances have bee

  • Using numbers, how do I tell what formulas a cell is used in?

    Using numbers, how do I tell what formulas a cell is used in?