Allowing user to click check boxes in any order

Hi,
I'm using Captivate 5.5 to create a training session with our software. On a particular page, our trainer wants me to instruct the user to click every check box on a page. Since there are 10 check boxes, I would like to let the user click all the check boxes in any order, as opposed to clicking them in the same order that I did using the normal training recording.
I've been trying to insert click boxes and assign variables, but then I run into the problem of not being able to show the checkmark when the check box is clicked.
Has anyone run into this problem or tried to created a page where the user can click multiple object in no particular order?
Thanks!

Hello,
This is perfectly possible with the checkboxes widget, and will be a lot less work than messing with images and click boxes. The big advantage of the checkboxes widget is that it is static, so you do not need to worry about rewinding the playhead which would be the case if you are working with interactive objects. However if you want to offer a 'reset' to the user, or perhaps to return to the slide with the widget, I warmly recommend to download the free enhanced checkboxes widget created by Jim Leichliter, because it allows you to control the variables associated with the widget.
I will not explain extensively how to use it, bit in a hurry because I have to teach in a couple of minutes. But here are some links: first a link to Jim's widget, than to a blog post where I explain the use of the Default Checkboxes widget, and third the explanation of the enhanced version.
Checkboxes Enhanced
Widgets and Custom Questions - part 1
Extended widgets ...
Just one last warning: I did not check the maximum checkboxes supported by the widget (you need 10), if necessary however you can insert the widget twice. However never duplicate a widget, nor have them in the same space on the stage.
Lilybiri

Similar Messages

FCH6-allow user to chng.check info for manual check-n not for auto chekf110

Hi Gurus....
T'Code FCH6 will allow user to change check info if the check is created manually. But it will not allow check info to be changed if the check is generated from F110. Is there any mean to protect check info from being changed no matter it is manual or auto check (F110)?
FCH6 is used for bank reconcilation. user need to key in encashment date but not to allow to modify other details e.g. amount, name,....but found for manual check, it allows users to do it so...
Is there any way to restrict the above....
Thanks n Regards
N Sathish Kumar

HI,
The way to restrict the users from changeing the data or restricted access to certain screens or fields or t-codes can be done through Authorization Objects. Approach your Basis guy to create one for you and you assign this Auth. Object in the user roles. Provide the Basis guy with the fields that you want to restrict. I think this is the only way to restrict the access to certain fields in a screen.
uset this link to understand more on Aurth. Objects
http://help.sap.com/erp2005_ehp_02/helpdata/en/95/1632e5ba9511d29e310000e839cd96/frameset.htm
Thanks
VK

Image mapping - capability to allow users to click on to open diff reports

Hi,
I want to display an image with the capability to allow users to click on it to open different reports... e.g, let's say I have an image with one section showing year 2012 and another section showing 2013. now if user click on 2012 then it should show report for 2012 and when user click on 2013 then it should show report for 2013.
can you please guide me as how can I accomplish it
Thanks

Hi,
>
<img src="#WORKSPACE_IMAGES#Image.gif" border="0" width="1167" height="468" alt="" usemap="#reportsmap">
<map name="reportsmap">
<area shape="rect" coords="146,292,252,342" href="f?p=&APP_ID.:&APP_PAGE_ID.:&APP_SESSION.:">
<area shape="rect" coords="312,251,403,296" href="f?p=&APP_ID.:&APP_PAGE_ID.:&APP_SESSION.:">
</map>
3) created report based on a parameter P2_YEAR
Step 4 Require Assistance: may I know how to set P2_YEAR to 2011 when 2011 section is clicked and set 2012 when 2012 section is clicked.
>
you can fill the page item using the URL syntax http://docs.oracle.com/cd/E37097_01/doc/doc.42/e35125/concept_url.htm#BEIJCIAG
<img src="#WORKSPACE_IMAGES#Image.gif" border="0" width="1167" height="468" alt="" usemap="#reportsmap">
<map name="reportsmap">
<area shape="rect" coords="146,292,252,342" href="f?p=&APP_ID.:&APP_PAGE_ID.:&APP_SESSION.::::P2_YEAR:2011">
<area shape="rect" coords="312,251,403,296" href="f?p=&APP_ID.:&APP_PAGE_ID.:&APP_SESSION.::::P2_YEAR:2012">
</map>regards,
Erik-jan

Item Partners Check box in Sales Order

Hi all,
What is the functionality and configuration settings of Item Partners Check box in sales order, partner function tab line item level?
When i find the check box marking then it allows me changes by double clicking of the partner and changing the address, but when the same check box is not marked then it is in dispaly mode when i double click it.
So please suggest me how to control its features.
Thanks in Advance,
Cheers,
Anil.

Hello,
If this indicator is activated, the partner is validated at item level.
It may happen that in a business transaction the partner in the document header does not apply to all items, for example, if specific goods for a customer are normally delivered to another ship-to party.
In sales documents and billing documents you can enter one of the deviating partners from the document header at item level.
When creating a document , the system copies the document header partners to the items. If you want to define another partner than the one in the document header at item level, overwrite the proposal from the item partner screen.
Prase

Check box to Work Order to identify that they were generated from PM,Ins,Pr

Hello,
Would it be possible to add a check box to Work Order to identify that they were generated from PM, inspection or Predictive Maintenance?
How can we configure this and how can we set up to report on this.
Thanks.

There are many option to identify that order was from PM (which is planned) & corrective work orders.
Set up order types & train user to use specific order types when they build maintenance plan / Item to create work order.
Configure order type 'Define Default Value for Planning Indicator for Each Order Type' so that system knows what is planned & unplanned.
SAP note for the config:
(Define Default Value for Planning Indicator for Each Order T
In this section, you can define a default value for each order type for the order planning indicator.
The order planning indicator is used for selection and statistical analyses in the Plant Maintenance and Customer Service Information System.
Three order planning indicators are predefined by SAP:
Planned order. You should use this indicator for order types, for which tasks can be anticipated.
Unplanned order. You should use this indicator for order types, for which the task cannot be anticipated, but also need not be performed immediately.
Immediate order. You should use this indicator for order types, for which the necessity of the task cannot be anticipated, but where the task must be performed immediately.)
Hope this is helpful.
Ravi

Subcontracting Check Box in Maintenance Order

Hello
Help me to know if we are able to create the PR via control keys PM02 & PM03 then what the use or funcationality of subcontracting check box in maintenance order.
Regards
Kapil

Dear Abhishek,
The same error message refers to one of the following material provision indicators getting to me also:
"S" - an entry within table T417 is missing where KZBRS (A&D-Specific Material Provision) is not set
"X" - an entry within table T417 is missing where KZBLF (Rework Material from Subcontractor) is not set
"F" - an entry within table T417 is missing where field ADSUB_DEFDLV (Deferred Delivery) is not set
also, i Insert a row with S and keep MPCust and MPVend blank and Check the A&D MP box
getting following error "
Op. 0010 must have exactly one component as 'Rework Material to Subcontr.'"
Can u tell me the config for MPI??

Is there a way to automatically add a page to my current form when the user marks the check box?

I have an existing expense report form that I created using Adobe Pro's Form Tools. The user enters all the appropriate information (ie, vendor, amount, business justification, etc.) and then it calculates all the expenses at the bottom.
I have added a box next to each line item to be checked by the user in the case that they have an expense with a missing receipt.
Is there a way to have a pre-existing missing receipt form, be added at the end of the expense report, each time the user marks one of these missing receipt check boxes?
If so, is there a way to have all the expense line item data automatically fill in the information on the added missing receipt form?
I am using Adobe Pro's Form tool rather than Livecycle because it is compatible with my IPAD.
Thanks,

One word: Templates
For more information, see: page: http://livedocs.adobe.com/acrobat_sdk/9.1/Acrobat9_1_HTMLHelp/JS_Dev_Templates.80.1.html
Unfortunately, templates don't work with Reader either, unless the document is Reader-enabled with LiveCycle Reader Extensions.

Generate DP BOM check box without any description - /SAPAPO/CURTO_GEN_DP

I am using APO 5.1. In transaction /SAPAPO/CURTO_GEN_DP, there is a checkbox that is blank right below the "Expl. Quantity" field. I am trying to determine the purpose of that check box. Just recently since support stack 12, I am finding that if it is not checked some of the input components will be missing. When checked all the input components are created correctly from the SNP PDS.
Thanks for any insight,
Brian Houston

Hi Brian,
Stanimir is right. The label should have the text "Do not consider Transportation lanes to other locations". You can check note 1448356 which describes the problem and provides you with a manual solution.
Hope it helps!
Cheers!
Stefan

Return Item and Free goods check box in purchase order

Hi Guru:
I just got the question regarding the return item and free goods check box,my question is that if I check the free good check box,then the price of the matieral will be charged to zero,however,if I want to issue the return purchase order to the vendor,does I need to check the return box first and then issue the return order to the vendor? Then go to MIGO transaction to select the movement type 122 to return the goods,what's the whole precedure for returning the goods to the vendor,can anybody tell me,very appriated!

Hi,
Retun to vendor through have two types....
One is you have Po created, vendor send the item in that few items have rejected so you need to return the item to vendor......
here in MIGo chose returrn to vendor selce the PO numbere.... system automaticaly take the movent type 122....
sencond type is Retun PO..... In Po while creting the PO tick the return indication..
If you do the GR system will pick 161mopvent type.. ( GR returns)...
REgards
anand

"S" check box in sales order

Hi:
When I am entering the material in the item of sales order,the S check box(beside order quantity column) automatically checked,and there is no delivery data/material available data/loading data popped up in the line item,but the mrp setting of the material looks good,what's happening?

Dear Allen,
The 'S' check box is marked in following two cases:
1. If there are more than 1 Schedule Lines for the item
2. If the Confirmed quantity is less than Order Quantity.
As in your case there is no Delivery data in Lilne Item, it means the entire Quantity is not Confirmed. Kindly check whether there are adequate stock in the system & MRP settings.
Hope this helps. .
Thanks,
Jignesh Mehta.

How to activate the Check box in Purchase Order after Goods Receipt

Hi All,
How to activate the check box after Goods receipt of Purchase order in Item view (Goods Receipt is completed).
Where t make the settings in SPRO.
Regards,
Shailendra Hadkar

Hi
SPRO - SAP IMG- Material management - Inventory management and physical inventory - Goods receipt - create purchase order automatically - activate auto Po creation for movement type.
Then activate the auto PO creation in Vendor master - Purchasing view
Check it out.
Regards,
raman

User exit for checking creation of prod. order reference to sales order?

Hi all,
What are user exit suitable for checking creation of prod. order reference to sales order to have the same plant. If plant not the same, an error message should appear.
thanks.

Hi,
user exits:
PPCO0003 Check exit for order changes from sales order
PPCO0007 Exit when saving production order
Regards,
Vivek

Using Cap6, need to create menu screen that allows user to click a button, branch to other screens, and return to main menu. When returning to the main screen the button that was clicked will be grayed out or inactive. How do I do this? I created image

I am trying to emulate a piece of equipment. I need the user to be able to click on specific buttons that will take the user to another screen(s). After viewing those screens the user will be directed back to the main screen where the user would know which buttons had been pressed and which still needed to be pressed. I create image buttons with the 3 states - that worked except when the user returns the slide is reset and so the user does not see the 3rd state of the button. How can I get that 3rd state to stay after user returns to the main screen?

Hi Elizabeth,
Since I just did this morning what you are currently attempting to do, I thought I'd share my method. I must provide a disclaimer and tell you that I am not an expert in Captivate advanced actions--like you, I am still figuring them out. However, I am happy to share here anything I have learned thus far.
First, here is what my initial slide looks like (see interaction slide below). I created all of the icons (including the 'grayed out' icon on the second screenshot) in a few minutes using Adobe Illustrator. The icons have been imported as custom multi-state buttons so that I could have the desired effect when the user hovers over the image--the yellow 'explore' flag appears only when the mouse is over the icon. When the learner click either image, they are sent to the corresponding slide. Once both slides are viewed, a 'continue' button will appear at the base of the screen (something I've not figured out--I sent an email to Lieve begging for some guidance).
The initial slide (interaction slide):
Second, here is a depiction of what happens when the learner returns to the interactive slide from the content slide (see image below): Once the learner visits the 'Battery Content' slide and then returns to the interaction slide, the images have changed. The multi-state button is hidden (through the advanced action), the replacement image (the image with the completed banner over it) is shown, and a hidden click box to allow the user to return to the previously visited page (just in case they desire to do that) is "shown" to allow navigation since the button is no longer there (because it is magically hidden).
Content Slide 1:
Remember, there may be an easier way to do this in Captivate. I am using Cp6 for this module.
1. I created two user variables as follows
Name: v_batteryExplore
Value: 0
Name: v_fuelExplore
Value: 0
2. I created an advanced action for each as shown below (showing only one--duplicate the first and change the names to match the content):
Credit: I learned these steps from @Lilibiri and Dr. Pooja Jaisingh!
I have also noticed that it matters where the buttons are located on the timeline. It seems best to have buttons above all other content. Not sure why, but I have had images not appear when I have not done this.
And the last step you do not want to forget; you need to remember to tell Captivate to use the action.
As a final note, remember that the elements you do not want to appear on the initial screen must not be initially visible. Make sure to set them to invisible by removing the checkmark in the 'Visible in output' box located next to the button name. In my case, the image of the completed battery and the invisible button to allow a revisit of content was initially hidden. Here is a final screenshot of my timeline for this interaction. I hope this information helps you!

Set user inherit permissions check box using powershell

Hi All,
How can I set the the "include inherit permissions from this objects parent" propertiy in Active Directory user object to a list of users using powershell.
This option is not checked for some of my users and I'll like to set it using a powershell script.
Thanks
Simon
MCSA, MCSE, MCITP:SA, MCITP:EA, MCITP:Enterprise Messaging Administrator 2010, CCNA

download Quest Active Directory:
Get-QADUser -SizeLimit 0 | ? {$_.DirectoryEntry.ObjectSecurity.AreAccessRulesProtected} | Set-QADObjectSecurity -UnLockInheritance
or
Get-QADUser -SizeLimit 0 | ? {$_.security.PermissionInheritanceLocked} | Set-QADObjectSecurity -UnlockInheritance
or
$user = [ADSI]"LDAP://cn=kazun,ou=test,dc=contoso,dc=com"
$acl = $ouser.objectSecurity
$isProtected = $false # allows inheritance
$preserveInheritance = $true # preserve inherited rules
$acl.SetAccessRuleProtection($isProtected, $preserveInheritance)
$user.commitchanges()
I had this issue and using both of Kazun's methods worked. A mod should mark this as the answer.Paul Frankovich

How to stored data after clicking check box save in data base table

TABLES:mseg,mard,mkpf.
TYPE-POOLS:slis.
SELECTION-SCREEN BEGIN OF BLOCK b1 WITH FRAME TITLE text-001.
SELECT-OPTIONS:smblnr FOR mseg-mblnr MODIF ID m1,
               smatnr FOR mseg-matnr MODIF ID m2,
               swerks FOR mard-werks MODIF ID m3,
               slgort FOR mard-lgort MODIF ID m4,
               slgpbe FOR mard-lgpbe MODIF ID m5,
               scharg FOR mseg-charg MODIF ID m6,
               sbwart FOR mseg-bwart MODIF ID m7,
               skostl FOR mseg-kostl MODIF ID m8,
               saufnr FOR mseg-aufnr MODIF ID m9,
               srsnum FOR mseg-rsnum MODIF ID m10.
SELECTION-SCREEN END OF BLOCK b1.
SELECTION-SCREEN BEGIN OF BLOCK b2 WITH FRAME TITLE text-002.
PARAMETERS:pre RADIOBUTTON GROUP radi USER-COMMAND ucomm DEFAULT 'X',
           pse RADIOBUTTON GROUP radi,
           bps RADIOBUTTON GROUP radi.
SELECTION-SCREEN END OF BLOCK b2.
SELECTION-SCREEN BEGIN OF BLOCK b3 WITH FRAME TITLE text-003.
PARAMETER:layout TYPE i.
SELECTION-SCREEN END OF BLOCK b3.
DATA:BEGIN OF itab OCCURS 0,
     mblnr LIKE mseg-mblnr,
     matnr LIKE mseg-matnr,
     werks LIKE mard-werks,
     lgort LIKE mard-lgort,
     lgpbe LIKE mard-lgpbe,
     charg LIKE mseg-charg,
     bwart LIKE mseg-bwart,
     budat LIKE mkpf-budat,
     menge LIKE mseg-menge,
     meins LIKE mseg-meins,
     kostl LIKE mseg-kostl,
     aufnr LIKE mseg-aufnr,
     rsnum LIKE mseg-rsnum,
     checkbox TYPE c,
     END OF itab.
DATA: gt_fieldcat TYPE slis_t_fieldcat_alv,
       gw_fieldcat TYPE slis_fieldcat_alv,
       gt_layout TYPE slis_layout_alv.
START-OF-SELECTION.
SELECT msegmblnr msegmatnr mardwerks mardlgort mardlgpbe msegcharg msegbwart mkpfbudat
    msegmenge msegmeins msegkostl msegaufnr mseg~rsnum
INTO TABLE itab FROM
          mseg JOIN mard ON mardmatnr EQ msegmatnr
               JOIN mkpf ON msegmblnr EQ mkpfmblnr
               WHERE mseg~matnr IN smatnr.
IF sy-subrc EQ 0.
    SORT itab BY matnr.
    PERFORM display_alv_output.
ENDIF.
*&      Form display_alv_output
      text
--> p1        text
<-- p2        text
FORM display_alv_output.
REFRESH gt_fieldcat.
gw_fieldcat-fieldname = 'MBLNR'.
gw_fieldcat-tabname = 'itab'.
gw_fieldcat-col_pos = 1.
gw_fieldcat-seltext_m = 'material document'.
gw_fieldcat-key = 'x'.
APPEND gw_fieldcat TO gt_fieldcat.
CLEAR gw_fieldcat.
gw_fieldcat-fieldname = 'MATNR'.
gw_fieldcat-tabname = 'itab'.
gw_fieldcat-col_pos = 2.
gw_fieldcat-seltext_m = 'material'.
gw_fieldcat-key = ' '.
APPEND gw_fieldcat TO gt_fieldcat.
CLEAR gw_fieldcat.
gw_fieldcat-fieldname = 'WERKS'.
gw_fieldcat-tabname = 'itab'.
gw_fieldcat-col_pos = 3.
gw_fieldcat-seltext_m = 'plant'.
gw_fieldcat-key = ' '.
APPEND gw_fieldcat TO gt_fieldcat.
CLEAR gw_fieldcat.
gw_fieldcat-fieldname = 'LGORT'.
gw_fieldcat-tabname = 'itab'.
gw_fieldcat-col_pos = 4.
gw_fieldcat-seltext_m = 'storage location'.
gw_fieldcat-key = ' '.
APPEND gw_fieldcat TO gt_fieldcat.
CLEAR gw_fieldcat.
gw_fieldcat-fieldname = 'LGPBE'.
gw_fieldcat-tabname = 'itab'.
gw_fieldcat-col_pos = 5.
gw_fieldcat-seltext_m = 'storage bin'.
gw_fieldcat-key = ' '.
APPEND gw_fieldcat TO gt_fieldcat.
CLEAR gw_fieldcat.
gw_fieldcat-fieldname = 'CHARG'.
gw_fieldcat-tabname = 'itab'.
gw_fieldcat-col_pos = 6.
gw_fieldcat-seltext_m = 'Batch number'.
gw_fieldcat-key = ' '.
APPEND gw_fieldcat TO gt_fieldcat.
CLEAR gw_fieldcat.
gw_fieldcat-fieldname = 'BWART'.
gw_fieldcat-tabname = 'itab'.
gw_fieldcat-col_pos = 7.
gw_fieldcat-seltext_m = 'Movement Type (Inventory Management)'.
gw_fieldcat-key = ' '.
APPEND gw_fieldcat TO gt_fieldcat.
CLEAR gw_fieldcat.
gw_fieldcat-fieldname = 'BUDAT'.
gw_fieldcat-tabname = 'itab'.
gw_fieldcat-col_pos = 8.
gw_fieldcat-seltext_m = 'Posting Date in the Document'.
gw_fieldcat-key = ' '.
APPEND gw_fieldcat TO gt_fieldcat.
CLEAR gw_fieldcat.
gw_fieldcat-fieldname = 'MENGE'.
gw_fieldcat-tabname = 'itab'.
gw_fieldcat-col_pos = 9.
gw_fieldcat-seltext_m = 'QUANTITY'.
gw_fieldcat-key = ' '.
APPEND gw_fieldcat TO gt_fieldcat.
CLEAR gw_fieldcat.
gw_fieldcat-fieldname = 'MEINS'.
gw_fieldcat-tabname = 'itab'.
gw_fieldcat-col_pos = 10.
gw_fieldcat-seltext_m = 'Basic unit of measure'.
gw_fieldcat-key = ' '.
APPEND gw_fieldcat TO gt_fieldcat.
CLEAR gw_fieldcat.
gw_fieldcat-fieldname = 'KOSTL'.
gw_fieldcat-tabname = 'itab'.
gw_fieldcat-col_pos = 11.
gw_fieldcat-seltext_m = 'Cost center'.
gw_fieldcat-key = ' '.
APPEND gw_fieldcat TO gt_fieldcat.
CLEAR gw_fieldcat.
gw_fieldcat-fieldname = 'AUFNR'.
gw_fieldcat-tabname = 'itab'.
gw_fieldcat-col_pos = 12.
gw_fieldcat-seltext_m = 'Order Number'.
gw_fieldcat-key = ' '.
APPEND gw_fieldcat TO gt_fieldcat.
CLEAR gw_fieldcat.
gw_fieldcat-fieldname = 'RSNUM'.
gw_fieldcat-tabname = 'itab'.
gw_fieldcat-col_pos = 13.
gw_fieldcat-seltext_m = 'Number of Reservation / Depe'.
gw_fieldcat-key = ' '.
APPEND gw_fieldcat TO gt_fieldcat.
CLEAR gw_fieldcat.
gw_fieldcat-col_pos = 14.
gw_fieldcat-fieldname = 'CHECKBOX'.
gw_fieldcat-seltext_m = 'Compltd'.
gw_fieldcat-checkbox = 'X'.
gw_fieldcat-edit = 'X'.
APPEND gw_fieldcat TO gt_fieldcat.
CLEAR gw_fieldcat.
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
EXPORTING
    I_CALLBACK_PROGRAM                = 'ZREPORT'
    IS_LAYOUT                         = gt_layout
    IT_FIELDCAT                       = gt_fieldcat
   TABLES
     t_outtab                          = itab
EXCEPTIONS
    PROGRAM_ERROR                     = 1
    OTHERS                            = 2.
ENDFORM.                    " display_alv_output
this is mycode .
send me replay.

Hi Lakshmi,
       Can u explain briefly what is ur requirement. U mean to say that after clicking the checkbox in data base table or Screen?
Regards,
Jayaram...

Allowing user to click check boxes in any order

Similar Messages

Maybe you are looking for