Will a MacBook Pro a1278 top case fit on a a1280

hello I have a macbook pro a1280 (late 2008) and my top case is pretty dented on the sides and stuff and I wanted to replace it now when I'm looking on google I don't find a top case for the a1280 I see one for a a1278 now I noticed that the a1278 case looks like the a1280 and it has the battery compartment like mine does now I just need a new blank case no mother bored no parts just a blank case all I want to know is if I buy it and put my mother bored and parts  from the a1280 case and put it in a1278 case will it fit and work?

The problem I face with your query, there is no a1280 Macbook Pro that I can find.  The a1278 are 13" models from 2009 through 2012.
Go to the iFixit.com and powerbookmedic.com web sites and check the parts they have listed.  You may find your answer there.
Ciao.

Similar Messages

  • Will any Macbook Pro 13" hard case fit my regular Macbook that is aluminum also?

    I am trying to find a hard case that fits my aluminum 13" macbook. It is not a pro and Apple doesn't make them anymore. Will the Macbook pro 13" fit my Macbook 13"

    No, there's a different port arrangement.
    MacBook
    MacBook Pro (With a FireWire800 port and an SD card slot)

  • Will a macbook pro 2011 charger end fit a 2011 macbook air

    qill a macbook 2011  pro charger fit the macbook air 2011

    Early and Late 2011 MacBooks Pro and the Mid 2011 MacBook Air use the same MagSafe port, so you can use the MacBook Pro charger with your MacBook Air

  • What is the largest hard drive I can upgrade to for MacBook Pro A1278 Early '11

    What is the largest hard drive I can upgrade to for macbook pro A1278 Early 2011?  I have seen 750GB on some websites, but I would like a 1TB  I am looking for SATA 6.0GB, 1TB 7200.  Is this dependant on the physical size of the hard drive? I have seen a height of 15mm and 9.5 mm.  How do I know what will fit??

    I have not seen any 7200 rpm 1 TB HDDs.  They all are 5400 rpm.  I would say that this HDD comes closest to your requirements.  Tomorrow, there may be others.
    http://www.newegg.com/Product/Product.aspx?Item=N82E16822145584
    Ciao.

  • Will a Macbook pro early 2011 installation disc work on a 2007 or 2008 Macbook pro 15

    My collegue's 2007 or 2008 Macbook pro 15 inch keeps getting stuck on the apple load up screen everytime he hits the power button. He doesnt know what version it is and I forgot to write down the model number of it(Ill update May 16 at 10am PST). I tried safe mode, it worked but after the loading bar gets close to 1/2 it freezes up. He can not find his installation disc that came with the computer. I have mine but its for Model # A1278 I think its snow leopard. Will the installation disc and application disc run successfully on my collegue's 2007 or 2008 Macbook pro?
    I apologize if there's a similar thread out there, I couldnt find one. -

    Will a MacBook Pro Early 2011 installation disc work on a 2007 or 2008 MacBook Pro 15?
    No it will not.
    Machine specific gray/back disks are for one model of Mac only as they only contain hardware drivers for that model, not previous ones.
    The 10.6.3 white Snow Leopard retail disk will work and it's available from Apple online for a small charge.
    My collegue's 2007 or 2008 Macbook pro 15 inch keeps getting stuck on the apple load up screen everytime he hits the power button.
    I tried safe mode, it worked but after the loading bar gets close to 1/2 it freezes up.
    This is indicative of a problem with the boot drive and the file structure retaining data on the drive.
    The progress bar progressing and stopping means the fsck drive repair is failing, likley the drive incurred head shock damage at that point.
    The boot drive itself is likely fine and the problem can be resolved but the disks are going to be required if it's running Snow Leopard.
    First get the disks, then attempt Disk Utility > Repair Disk and check the SMART status if the drive is still good.
    If there is no backup of data, get that off the machine using a external boot drive.
    To fix that problem of a bad sectors, unfortutly the entire drive will need to be Zero Erased (security option > zero all data) using Disk Uility while c or option/alt key booted from the 10.6 disks (using a wired or built in keyboard), it's the only way.
    This means all programs, files (remaining) and OS X will be removed in the process. You could replace the drive also.
    Step by Step to fix your Mac
    Create a data recovery/undelete external boot drive
    How to erase and install Snow Leopard 10.6
    Install/upgrade RAM or storage drive in Mac's
    https://discussions.apple.com/community/notebooks/macbook_pro?view=documents#/?p er_page=50

  • Macbook Pro A1278 2010 very very slow

    Hi, Guys
    I got a macbook pro a1278 mid 2010. It's becoming extremly slow.  I have tried some solutions, nothing works.
    1, Start from a known good hard drive ( newly installed OS, smart test okay)
    2, reset smc
    3, reset pram
    I've spent a couple of days on it. Any ideas about this situation will be appreciated.
    Thanks

    OS X version?
    Start up in Safe Mode.
    http://support.apple.com/kb/PH4373
    Repairing disk and reinstalling OS X may help.
    Best.

  • MacBook pro a1278 mid 2012 is connected to wifi but no internet

    hello guys, i have a MacBook pro A1278 with OS X mavericks, my issue is that The computer is always connected to my wor connection, but out of the blue the internet goes off, like i tried to download a file, 100 mb, it was working property for like 5 minutes and then the download stopped and all the internet connection failed, although the MacBook was still connected to the wifi and the wifi icon was at it's maximum, then after a few minutes it was working again for like another 5 minutes and then it stopped again, i also have a windows pc and it was working property all the time.
    is there a way that u can fix this?
    thanks

    Even though the iPod shows as been connected, it might not have actually received a valid IP address via DHCP from your Wi-Fi access point or router.  Head to Settings -> Wi-Fi and tap the > next to the network you are connected. If 169.xxx.xxx.xxx is listed for an IP Address, then your iPod did not receive a valid IP address.  To correct this you can reboot your router by unplugging it from power for about 30 seconds.
    It wouldn't hurt to also reset your iPod.  To do this, press and hold both the Sleep/Wake and Home buttons together long enough for the Apple logo to appear.
    Perhaps this article would be worth at as there may be a configuration on your mother's router/modem that is preventing access.  This will require you to have admin access to the router/modem's configuration interface that is usually accessible via a web browser. 
    iOS: Recommended settings for Wi-Fi routers and access points
    B-rock

  • MacBook Pro A1278 won't turn on.

    Yesterday I connected my iPhone 5 to my MacBook Pro A1278 to install the new iOS 8.1. My MacBook died and I haven't been able to turn it on since, even though it's been fully charged. Is there anything I can do myself other than take it to the Apple Store and spend all my savings?
    I don't know whether it's relevant, but I believe my operating system was Yosemite.

    Intel-Based Apple Portables: Troubleshooting a computer that will not power on
    MacBook Pro: Distorted video or no video issues

  • Hard drive dies if you put a MacBook Pro on top of a white MacBook

    Myself and one other have had this same problem. Sleep a white macbook and start using your 2006 MacBook pro on top of it. After a few mins it freezes and only the mouse pointer works with mostly the beach ball. Hard reboot and then you just get clicking noises from the hard drive (stuck on grey screen sometimes with the spinner or question mark or sometimes blank)and it has mechanical failure. Just coincidence or a real problem?
    Post here if you have had this same problem thanks.

    I was originally using it on my knee then when moving it to a table I just happened to place it on top of another MacBook instead of clearing space, I didn't think it would be a problem.
    Nop the hard drive no longer works. It spins up but makes a clicking sound like the heads are damaged. If you tap the case then it sounds like it starts reading and the apple and spinner appear on the grey screen but it eventually just spins down.
    Its possible the magnet in the Macbook case done it, although wouldn't that cause problems with the Macbooks own drive all the time?

  • Is Recovery Disk Needed for Early 2011 MacBook Pro (A1278)

    Early 2011 MacBook Pro (A1278)
    I'm planning on putting in a new hard-drive (SSD) after a little scare with my factory hard-drive and the mounting bracket coming loose.
    The plan was to open it up, install the hard drive, restart with Command-R held down, enter OS X Recovery, and finally restore from my Time Machine back-up.
    However... I've heard that my model may not have the ability to enter OS X Recovery without a DVD that was shipped with the hardware. First, is this true? When I had issues with the current hard drive, I was able to use Command-R to enter OS X Recovery. It even appeared to have me connect to the internet and looked like it downloaded the application. Does that indicate that I should be able to do that again? Or did that get pulled from the hard-drive somehow? Second, if I need a disk - I did NOT get a disk from Apple when I purchased my device from the store. I do NOT throw things away (I have all the little inserts and everything still in the box, even the receipt). Can I obtain this disk from Apple for free?

    The Early 2011 MacBook Pro supports 16 GB of RAM, although Apple says it only supports 8 GB of RAM.
    You can buy more RAM at OWC or Crucial > http://eshop.macsales.com/shop/memory/Apple_MacBook_MacBook_Pro/Upgrade/DDR3_133 3MHz_SDRAM You can find memory compatible with Macs in other sites, but I recommend those two sites because you can be sure that the RAM will be compatible.
    If you need help installing memory > http://support.apple.com/kb/ht1270

  • How can i change macbook pro a1278 keyboard ?

    how can i change macbook pro a1278 keyboard ?

    Yes. It will be very simple.
    Power down your mac. Hold down the option key on startup.
    You will see disk utility. Go in disk utility and click the erase button for your HDD data.
    Then go into install OS X and install the operating system.
    It will be a completely fresh install ready for selling.

  • Will my MacBook Pro from 2008 work with the Thunderbolt Display? Or will I need an adapter?

    Will my MacBook Pro from 2008 work with the Thunderbolt Display? Or will I need an adapter? I like to have two monitors and currently using an Cinema Display from 2005. Thanks

    If your computer does not have Thunderbolt you cannot use a Thunderbolt display.  There are no adapters that will help.

  • Found Apple Macbook Pro 13" Rubber Case with extras - $37.99

    I was browsing for a case for my macbook pro 13" and a rubber type of exterior casing that includes a keyboard / track pad protector + lcd protector for $37.99. I hope this is a good deal since the Apple Store sells it for $49.99 for just the case it self... Hope this helps any one who is in the market for a case. thanks.
    http://caselogic.ecrater.com/p/7806365/apple-macbook-pro-13-rubber-case-w

    sorry price is $34.99 not $37.99....

  • Macbook pro a1278 magsafe

    I have a mid 2010 Macbook Pro a1278. When I plug in the magsafe it is green and then changes to orange and charges the battery. As soon as I hit the power button the light goes to green for about 10s and then back to orange. The macbook does not start up, no fans spin and no signs of life.

    So is your problem that the MBP doesn't start or you have an problem with your charger? There may be a short in the charging circuit and the battery is dead and the charger doesn't work. Take it in for a look see at an Apple store or AASP.

  • I have macbook pro A1278 serial number **************  need ping code to unlock

    i have macbook pro A1278 serial number *******************
    need ping code to unlock Please Find Attached file About This

    sounds like a stolen computer that's been locked by the owner.

Maybe you are looking for

  • FRM-47023: No such parameter named G_QUERY_FIND

    Hi All: I am getting following Error when i am opening my form from apps(11.5.10.2) FRM-47023: No such parameter named G_QUERY_FIND exists in form XXEMP FRM-40105 : Unable to resolve reference to item PARAMETER.G_QUERY_FIND i am using apps11.5.10.2 (

  • Help with Photoshop Elements 3.0

    I had Elements 3.0 installed on my home computer. My computer crashed and everything had to be re-installed. I can not put my hands on the disc for 3.0 but I do have my serial number. I downloaded PSE 10.0 and every time I try to use it, it shuts dow

  • How to save the data in form before submit to sap backend

    Hi experts,              i have to create one form . In this form i have to save the data and that form should sent to another person  to submit it in to sap back end. is there any possiblities to create form like this... Please any one help me...

  • Staging area and target area

    hi..friends. should staging area and target area be same or different??? if same what are the advantages and dis-advantages??? and if not same what are the advantages and dis-advantages???? I want your help.. Thanks.

  • Quick Office in C6-00

    Hi Could you please tell us why Quick Office software which is pre installed in Nokia C6-00 is only trail version.. but you guys were already given full version for Eseries and Nseries mobile and even it was installed full version of quick office for