Will aperture auto advance to display each new image when shooting tethered?

I've tethered successfully with the Canon 6D using either Lightroom or Aperture. When using Lightroom, it will automatically load the new image for display on my external monitor. I cannot find a way to have the same result with Aperture and I would much prefer to use Aperture so the images can be imported directly into the Aperture library. Am I missing something or is this not possible? I like to work from the camera, not sitting at the computer. 

Short answer: Yes.
When you initiaite a thethered session, there is a checkbox in the tether HUD that turns auto-advance on or off. The default is on.
If you have tried it and it doesn't work, what are the symptoms?

Similar Messages

  • Captivate 7: slide with mouse will not auto advance after publishing

    After I export my Captivate video, any slide that has a mouse object on it does not auto advance. I suspected that maybe the clicking sound file default attached to the action may have become corrupted, so I opened the sound file attached to "single-click" from Captivate. In the VisualClicks folder, there were no sound files. So, I opened the ClickSounds folder and attached the Mouse.mp3 file to this action. After publishing the training, the slide still will not auto advance. The slides that do not have the mouse action advance automatically as they should. The sound file may not be the issue (going to try to uncheck all of the Mouse Click Sound check boxes and republish to see if that helps).
    Was hoping to find a solution for future videos.
    Each slide is basically a layer of audio > slide > png file > the occasional smart object and/or text > mouse. I have no quizzes or video.
    When publishing I use the following setup swf/html5 with swf + html5 checked and scalable HTML content checked. We use Google Chrome and I've had numerous people try my HTML link after I've uploaded all files and everyone has the same issue. 
    1- Do you happen to know why the mouse action would cause the slide to not auto advance, and if so please let me know a solution so the user doesn't have to click next. If the mouse itself isn't the culprit, any other suggestions on what could cause this?
    2- Is there a way to make changes to the audio or override the mouse properties on all slides? I tried right clicking and "use the current mouse pointer for all slides" but it didn't change any of the properties. Thankfully my video is only 110 slides or it would have been even more painful.
    Captivate 7
    Windows 8.1

    Of course! Here ya go
    For the record, I did create a new project with only two slides to try and duplicate the issue. I had the same problem. I unchecked the Mouse Click Sound check box, republished and the slide auto advanced. I'm wondering if a default sound file was somehow moved or deleted? I discussed uninstalling and reinstalling C7 onto my laptop, but that's a frustrating solution haha

  • How do you display a new image in  webdynpro view?

    How do you display a new image in  webdynpro view?
    Where is the image stored and how do we specify the image path?

    hi ,
    The UI element Image enables you to integrate graphics into the Web application in a format that is processed by the Web Server u2013 for example, GIF, JPG, and PNG format. Height and width of the graphic can be specified using the properties height and width. The graphic is displayed without borders.
    saveur image   as mime
    with Mime Objects u cn upload doc , jpeg, or giff files from our local system into the webdypnpro system .
    Right click on ur component->mime object->import
    In the transaction sicf/bc/webdynpro , u cn check your component name there you can view the mime objects created by you .
    also refer the SAP online help :
    http://help.sap.com/saphelp_crm50/helpdata/en/46/bb182fab4811d4968100a0c94260a5/content.htm
    to knw more abt mime repositories.
    http://help.sap.com/saphelp_nw04/helpdata/en/f3/1a61a9dc7f2e4199458e964e76b4ba/content.htm
    regards,
    amit

  • Turn off the Auto adjust when shooting tethered in aperture

    is there any way to turn off the auto adjust feature in aperture? When I shoot tethered it over corrects and ruins all the shots, then I have to adjust back for the client to get a good idea of the image.

    After the disaster of iTunes 11.1 that deleted nearly all my archived podcasts (recovered from backup thankfullly) I was shocked, but not altogether surprised, to see that the option to delete played episodes has been enabled/re-enabled by default.
    From the lower right of the Podcasts window click Settings then, if needed, click Defaults, then turn Delete Played Episodes to Off.
    Why set the destructive option as the default?
    I have many episodes that I want to keep that are no longer available at their feed so the last thing I want is any automatic delete process to be enabled.
    tt2

  • Display metadata on image when exporting?

    I have a client who would like to see a date & time stamp displayed in a corner of all the images when I export them from RAW files. Is this possible in LR 3.4, and if so, can someone please tell me how/where to look? I've been all over it, can't find it.
    Thanks
    Andy

    Jim Wilde wrote:
    There's a limited capability in the Print module (i.e. using the Print to Jpeg option), though not sure it will allow both date and time. A much more flexible option, which would allow you to do exactly what you want, is the export plug-in LR/Mogrify2.
    Don't think LR/Mogrify 2 works in LR5.6. I can't get it to put anything on the image when exporting.

  • Auto Rotate problems when shooting tethered overhead

    I am shooting with a Canon 5d mark 2.  When I shoot product into the auto rotate works properly and the image appears rotated properly. Although when I shoot overhead or down on product it seems to get confused. If I rotate the camera twords the horizon and fire it figures out which way it should be the I can reframe my overhead shot.  But if the camera is moved at all it will show up rotated the wrong way and I have to slightly move the camera away from its directly overhead framing again so it can figure out wich way it should be rotating. I have tried all three rotate modes with the camera with similar inconsitant results. What is the best setting on the camera to get consistant results. Or ii I turn auto rotate off is there a way to tell lightrroom to rotate it properly on import like it does for all other settings like white balance.

    This isn't a function of tethering, I wouldn't think. Many cameras have a sensor that determines the orientation of images so auto-rotate works. The problem is that these sensors generally only work along one axis, using the force of gravity to tell them where down is. When you orient the camera such that the lens is pointing down most sensors no longer are able to determine whether you are in portrait or landscape, because there is no down -- it ends up being somewhat random.
    I've seen this on many different cameras, and all without tethering. It has to do when the sensor is read when composing the short.
    Your best bet is to set the camera to ignore the sensor when taking pics like this, and rotate the image by hand that are need to be in portrait. If there is no rotation in the image metadata, Lr will not rotate it. It will have to be done by hand. It won't be that hard to select a number of images and bulk rotate them.

  • Auto Chapter Markers at each new clip

    I have hundreds of video clips that I am going to be putting into a number of different FCP projects.
    They don't need much editing, but some do need a bit. However, they all need a chapter marker at the very beginning (i.e. before clip 1) and further chapter marks between each clip. Obviously the end of the last clip doesn't need a mark. I am hoping there is a way to get FCP to do this very quickly?
    Regards

    Basically there are about 25 "events", with there respective video files in folders on an external. I am going to import each folder into its own sequence in FCP, add all the clips to the timeline, make any adjustments, add chapter marks between each clip and export the file. I don't mind when I add the chapter marks, be it when adding to the timeline or when editing or exporting etc. There is only one event with more than 100 clips (208). The final files won't be that long, and I will add each file into DVDSP and make each one a track with individual chapters. So if the limit is 99 chapters per track, it doesn't really matter except for the one event, which I don't mind splitting up.
    The piece in bold is what I am wondering about now, and I would like it to be as automatic as possible. The rest is just background info.
    Regards

  • I am getting a new laptop, will my photo stream delete itself once I delete iTunes from my computer? And will it automatically come up on my new laptop when I download iTunes and sign in?

    I am getting a new laptop and need help!

    The following user tip is worth checking through:
    Recovering your iTunes library from your iPod or iOS device

  • My PSE 5.0 Organizer catalog now won't display any new image from the Editor

    Every attempt to Save As from the Editor gets the message, "There was a problem acessing the Organizer catalog.  It may be in use by another process, or a disc error occurred." 
    Then when I attempt to get the same image using the FIle menu and Get Photos ...From Files and Folders,  even though the newly saved file is correcly in there as shown by the thumbnail, I get this message:
    The ODBC data source reported the following error: "[Microsoft][ODBC Microsoft Acess Driver] Cannot open database 'I'.  It may not be a database that your application recognizes, or the file may be corrupt."
    I have repeatedly shut down the programs and the whole computer, and although this problem occasionally occurred in the past, now that's all I get.
    How can I get my Catalog to show these images?

    Thanks for your suggestion - Recover did it!  (That may have seemed obvious to you, but not being much of a computer expert, I didn't know enough to even ask the right question.)  I'm so glad to have my Organizer back!

  • One page displays as negative image when saving PDF to reduced size in Preview

    Imac Intel Mid 2007
    OS X 10.5.8
    Preview v4.2
    I have a multi-page PDF I'm trying to save to a reduced size.
    The document was constructed of separate pages, some of which were created as Photoshop PDFs in Photoshop CS4 and others were saved as PDF's from Word.  After moving over the individual PDF's to the side bar, the document saves fine in Preview at full size. When I use the quartz filter to "Save As"  "Reduced File Size" one page saves as a negative image and the others are all fine.
    One suggestion I saw in a similar thread was that the mode in PS might be CMYK, however it is not and it is RGB.
    Any help as to solving this would be greatly appreciated.

    n.gilbert wrote:
    If I select all pages 'save as' will only save out one page and not all.
    JPEG is single-page.
    If I print and choose 'pdf to jpeg'
    Elaborate, please.
    Is there a way to save to pages out in one go to jpeg where I can adjust the dpi setting?
    Yes. Build an Automator workflow using the PDFs > Render PDF Pages as Images action.
    Once I have the reduced jpegs it's easy enough to reimport into preview and save as a pdf.
    If the desired final output is multi-page PDF, no need to go through all that. You can do the task in Acrobat Pro (PDF Optimizer), or in Preview (Save as > PDF > Quartz Filter). If the current Reduce File Size filter doesn't provide satisfactory quality, use ColorSync Utility to duplicate it (or make a new filter from scratch) and adjust it to fit your needs.

  • Design Studio - Display a dummy image when searched photo does not exist

    hello,
    I would like to display an employee photo, which should be searched on the server folder with URL.
    Each photo name in my folder is : "employeeId.png".
    But some employees do not have a photo, and in this case I try to display a dummy photo, which I have in the same folder with employee id 00000000.
    My variables are :
    - URLlink variable is global variable type URL, which gives a path to my folder with employees photos
    - empnb variable is filled with employee id through getSelectedMember on cross table
    - filename variable to search a photo on the server
    - filename0 variable for those employees for which photo does not existe
    I tried to test the existence of an employee photo with getHeigh() method or getImage() method, to check if a photo filename set in Image1 is a real
    one. Cause if a photo does not exist, the Design studio put by default a small black cube inside Image.
    Unfortunatelly these tests are not working .
    My script:
    var filename =  URLlink + empnb + ".png";    // existing employee photo
    var filename0 = URLlink + "00000000" + ".png";  // dummy profile photo
    IMAGE_1.setImage(filename); //Try to put a photo found on the server 
    var height = IMAGE_1.getHeight(); 
    if (height == -1)
    { IMAGE_1.setImage(filename0);   }
    else   {IMAGE_1.setImage(filename);}
    Does anyone have other idea how to test if a photo exist or not in my folder.
    Many thanks!
    Bea

    I do not think it is possible today (at least not via checking of the image size). Such function would require
    * code extension in image component -> boolean IMAGE.exists()
    or
    * could be made by custom image implementation via design studio SDK. This custom image would send a request via Ajax and check response status. in case not existing some dummy images would be placed.
    for both options there are no plans as of today.
    the only option I see today is to generate in the folder "dummy" images for all employes who do not have any real image.

  • Aperture freezing up when shooting Tethered

    Hi
    I was shooting a job for a client yesterday with a Canon 1DS MkII and doing so tethered to my Macbook Pro. Everything was working fine but on 3 occasions during the shoot, Aperture froze up.
    I had to "Force Quit" and restart the App but then it did not recognize the camera. The only way to go was to reboot the machine. and then it worked but having to reboot 3 times in one afternoon session with a client was e embarrassing.
    Does the camera / laptop buffer cause the machine to seize up? Am I missing something? Should I be shooting slower or not writing files in a quick succession.
    I really like the tether option and so do my clients. Am I doing something wrong?
    Thanks n advance
    C

    Have the tech move the photo upon which they are working into the Quick Collection [ B ]. As long as he is in the QC, the photo won't advance while you continue to shoot.

  • Code Problems. New Image When Refreshed

    (First Im sorry if Iv done this wrong)
    Iv made a code that allows my main banner to change everytime the page is refreshed. it works well but I cant seem to get it linked from my .html to the .js.
    There are the codes Im using.
    <html>
    <script type="text/javascript">
    var imagesA=new Array();
    imagesA[0]="images/1.jpg";
    imagesA[1]="images/2.jpg";
    imagesA[2]="images/3.jpg";
    imagesA[3]="images/4.jpg";
    imagesA[4]="images/5.jpg";
    imagesA[5]="images/6.jpg";
    imagesA[6]="images/7.jpg";
    imagesA[7]="images/8.jpg";
    function randomimage() {
    var i=Math.floor(Math.random()*imagesA.length);
    document.getElementById("randomA").src=imagesA[i]; }
    onload=randomimage;
    </script>
    </head>
    <body>
    <img id="randomA" />
    </body>
    -------and
    <script src="url.js" type="text/javascript"></script>.
    if anyone could point out my mistakes it would be most helpful, Cheers

    no, images is the folder name where they are held, but i tried it anyways but same problem. cheers though
    edit---
    My code takes over the whole web page when I put the code in, in the html page, so there is only the background and the banner are showing, but if you view it online then it shows everything. What i wont to do it make it so I am able to edit the site without having to 1st delete the code then enter the code at the end everytime.
    I have now found out that if I put my banner at the bottom, everything is still there. so my main banners now have to be the footers.

  • Is there a way to disable auto advance permanently?

    Is there a way to disable auto advance permanently?
    I know how to disable auto advance by clicking photo tab and unchecking auto advance, however I would like to have this feature permanently disabled. It really messes up my workflow!
    It’s getting very frustrating to have to remind myself with each project to disable the function prior to commencing work. Any suggestions?
    Thank you,

    The auto advance setting should be remembered between Lightroom sessions.  It does on my system  Lr5.5 OSX 10.8.5.   The shortcut for autoadvance is CapLock and if you have the CapLock key turned on when you open Lr it will turn auto advance on.  Turn CapLock off and make sure auto advance is off in the menu and then exit and reload Lr.  It should then be off.  If this doesn't work I would delete the Preferences file and rebuild it.  Maybe something is stuck.  I think READING the CapLock key on startup instead of reading the Preferences on startup is a bad design or maybe this is a random glitch/bug.  Don't leave my CapLock on so my testing was minimal.  Hopefully someone else will chime in.

  • Stopping pdf slideshows from auto-advancing.

    Is it possible to stop the PDF slideshow exports from LR from automatically advancing? I want it to remain on the slides until I hit the cursor button (like I can do from within LR.) My pdf slideshows, however, keep auto-advancing. I can get it to advance FASTER in either direction by hitting the cursor buttons, but I can't "stop" it from auto-advancing completely, which is what I want.
    The LR slideshow export page says that "Adobe Acrobat transitions use a fixed speed," but I thought that this meant that you couldn't change the speed of the transition itself. Can you also not change the "rate of advancing" to the next slide? As I said, I want to make it NEVER advance until I tell it to, but I can't figure out how to do this.
    Thanks,
    Larry

    >Here is the trick (Adobe Reader 8, Macintosh). Go to Preferences, Full Screen. Make sure the "Advance every xxx seconds" box is checked, and that xxx is set to a number of seconds equal to or greater than the slide duration you specified in Lightroom. (If greater than, the Lightroom setting will prevail.)
    >
    >If it is unchecked, no auto advance whatsoever.
    Forgive me, but this is really confusing me. You said to make sure the "Advance every xxx seconds" box in Reader is checked, but then you said that if it's UNchecked, there will no auto advance. The way I'm reading this, these two statements contradict each other. Which way do you set it to stop the auto advance?
    You also said to make sure the xxx number in Reader is set to a number of seconds equal or greater to the LR setting, but than you said that if it's "greater than," LR's setting will prevail. If the LR setting prevails, how is this preventing auto advance? By saying to set it to "equal or greater than" the LR value, it seems like you're saying that you'll get a certain behavior for BOTH cases (i.e. both 'equal' AND 'greater than' will result in a certain behavior.) What specific aspect of the behavior are you referring to when you say to set it "equal or greater than" the LR value?
    Thanks for clarification on this,
    Larry

Maybe you are looking for