Will B2B Adapter receive operation with default triggers the SOA Composite

Hi,
Can any one provide me answers to this questions?
*1. Will B2B Adapter receive operation having default protocol will trigger SOA Composite? if so how can we achieve it?*
*2. will Listening channel with JMS protocol do EDI------XML translation? if so what are the configuration that need to be done?*
*3. Will B2B Adapter receive operation listens messages from other protocols like File ,FTP ? if so what need to be done ?*

1. Will B2B Adapter receive operation having default protocol will trigger SOA Composite? if so how can we achieve it?Yes, it can trigger SOA composite. First deploy the inbound B2B agreement with no channels selected under Host TP channels dropdown and then deploy your SOA composite which is referring to the deployed doc-def. Run an inbound test and you should be good to go.
2. will Listening channel with JMS protocol do EDI------XML translation? if so what are the configuration that need to be done?Yes, you may translate native EDI to XML with JMS listening channel as well. Make sure that listening channel is not marked as internal and an inbound EDI agreement is deployed for corresponding EDI doc. Following custom JMS headers must be set so that B2B can identify the partner -
FROM_PARTY
TO_PARTY
3. Will B2B Adapter receive operation listens messages from other protocols like File ,FTP ? if so what need to be done ?No. B2B adapter supports only three modes - JMS/AQ/Default (fabric), however you may use file/ftp adapter to receive files from B2B over file/ftp respectively.
Regards,
Anuj

Similar Messages

Will B2B Adapter in SOA Composite receives fault when validation fails ?

Hi Guys,
Can any one clarify the following questions on B2B ?
1. Can B2B Adapter receive exception whenever validation fails on b2b console after data sent from SOA Composite? if not how can we implement fault to soa composite in case of fault in b2b console?
2. How can SOA Composite having b2b adapter configured with send operation know about fault happened in b2b console due agreement fail or validation fails or configuration fails?
3. How can we handle faults in case of inbound scenario?

Exception is handled in oracle b2b.
All the execeptions are sent to IP_IN_QUEUE( in case of AQ) and B2B_IN_QUEUE( in case of JMS) with the consumer as "b2berror".
You can configure your B2B adapter to pull out the exception messages in your soa composite.

TS2755 Why I can't send and receive MMS with Redpocket on the 4s,iOS 5.1.1?

Why I can't send and receive MMS with Redpocket on the 4s,iOS 5.1.1?

Check Settings>Messages>MMS Messaging and make sure it's set to on. Contact Redpocket and make sure your account is provisioned correctly. However, if Redpocket is not a supported carrier, it is possible that not all functions of the iPhone will work or work as expected.

I'm moving to Japan and will be bringing my iPad, will FaceTime work to communicate with friends in the USA?

I'm moving to Japan and will be bringing my iPad, will FaceTime work to communicate with friends in the USA?

As long as you both have Wi-Fi.

How to use the b2b to send and recieve HL& message without SOA Composite

Hi Guru's
We are doing HL7 transactions at our end. We have following use case
Inbound partner gets the HL7(ADT) message and then without any transformation we wan't to send the message to another partner ( set up in the same b2B). I understand I can do this way
b2b--> SOA Composite--> B2B
but we don't want to use the SOA composite here as it is simple passthrough ( i.e no transformation of data is done).
I understand B2B when it gets the message puts in IP_IN_QUEUE
Can b2b( remote tp) read directly from IP_QUeue and send it.
I mean it has this strcuture
Inbound tP--> HOST--> Outbound TP
by doing this we will have no need to create the SOA composite. I hope this should be possible. I tried using the listening channel but outbound TP did'd got any message. Can you please guide me in all the steps I need to follow in order to set this up?
Any pointers will be highly appreciated as this will eliminate the SOA composite from the picture.
Regards
Sahil

Hi Sahil,
Yes, it can be done using HUB mode implementation. Please refer -
http://blogs.oracle.com/oracleb2bgurus/entry/implementing_oracle_b2b_11g_as
A sample configuration is also provided there (for HL7 itself).
Regards,
Anuj

Can't update JDeveloper 11.1.1.6.0 with the SOA Composite Editor

Greetings,
I've installed the Jdeveloper 11.1.1.6.0 and want now to update it with the SOA Composite Editor. After having gone to Help->Check for updates, selected "Search update centers" and checked "Oracle Fusion Middleware Products" and "Official Oracle Extensions and Updates", I don't have in the proposed list of products anything concerning the SOA Composite Editor.
My topology is such that I have installed Oracle Fusion Middleware on a server and, given that three WebLogic servers are required for run it, the AdminServer, the soa_server1 and the bam_server1, I cannot run on the same machine JDeveloper, so I installed it on a different one. Does this have anythin,g to do with the fact that I can't update the JDeveloper installation with the SOA Composite Editor ?
Many thanks in advance,
Nicolas

Can you please go to Help --> About in your Jdeveloper install, and provide the full version number that is listed there.
That will help us understand why the SOA extension may not be visible to you.
Thanks,
--jb

Business Event not triggering the SOA BPEL Process with OA Adapter

Hello Gurus,
I am working on Business event "oracle.apps.per.api.employee.create_employee" and the event is getting triggered when creating an employee from EBS.
The message has come till WF_BPEL_QTAB(I could seeit) and in "READY" status.We have a SOA BPEL Process that is subscribed to the event "oracle.apps.per.api.employee.create_employee" using OA Adapter.
The issue is that the SOA BPEL process is not getting triggered and it is not dequeing the message from WF_BPEL_Q.
Please let me know if I have missed any steps on SOA BPEL side.
Note: Agent Listener is up and running.
Thanks,
Sunil

Ofcourse, I subscribed to the business event using BPEL. Ideally the instances should be created and I should be able to receive the standard payload.
Yes the JNDIs are correct. We have other business events working in the same fashion and we are using same JNDI.

Issue with default install of SOA suite under Windows

Hello,
I installed SOA Suite without error, using the defaults of the Basic Installation.
When I start the SOA Suite, it starts up without error, but reports that ASG is Status=Down
When I try to create an Integration Server in JDeveloper, and test it, everything works, with the exception of the ESB Server:Fail, which in the details is listed as:
ESB Connection, Not Run
Can anyone explain these behaviors (ASG Status=Down and ESB Connection = Not Run)? Are these normal based on not installing products from the Advanced options? I'm in the process of an evaluation and I don't want to go too far down a path if my system is already somewhat broken.
Thanks.
--T
Thank you very much.

The ASG down is normal - it is not causing the other issue you have.
The JDev integration server connection error (ESB not run) is unfamiliar to me. Make sure you have created the Application Server connection properly (choose standalone). The Test Connection button for the Integration Server connection shows you status for the Application Server, the BPEL Server, and the ESB Server - what does it say for each of these?
Heidi.

Does the AS2 adpater is included by default in the SOA suite 11g or BAM

Hi,
I wanted to know that does the AS2 adpater comes by default with the SOA Suite 11g package or with BAM or we do need to have a seperate licensing for the adapter.
Thanks in Advance,
Jignesh

Hello Jignesh,
Oracle B2B (part of Oracle SOA suite 11g) supports AS2 exchange protocol. I don't think you need a separate license for that but still it would be better to confirm it once with your local Oracle Sales representative.
For Oracle B2B related info, please refer -
http://www.oracle.com/technetwork/middleware/b2b-integrations/overview/index.html
Regards,
Anuj

Database Adapter insert operation with return value

Hi All,
I have a table with auto generate parimary key in DB2 database. I need to have an insert operation ont this table which should return current value of primary key after insert.
For this , I have created an insert operation in DB Adapter. But this insert operation in oneway operation.
Is there any way I can create an Insert operation in DB2 adapter which returns the primary key value?
Thanks
--Sree

Hi Sree,
With insert operation it is not possible. You may use stored procedure/function to perform insert and return the required value, and call this SP/function using DB Adapter.
Regards,
Anuj

Synchronous JDBC adapter(receiver side) with stored procedure

Hi experts,
Can some database processing logic be included in receiver JDBC (synchronous) adapter...to put it simply
I have synchronous JDBC adapter in the receiver side..Using this JDBC adapter I want to get some response back from the table..
The requirement is not a simple fetch from the table..It involves some processing in the database side which I guess will be done by stored procedure..After this database processing , this output will be picked up by the JDBC adapter and will send to PI.
How can this be achived ..Any Blog..
Thanks
Ayan

Yes u can use stroed procedure and send back the response,
refer this link for stored procedure structure.
http://help.sap.com/saphelp_nw04/helpdata/en/64/ce4e886334ec4ea7c2712e11cc567c/frameset.htm
chirag.

File adapter PUT operation with header row.

i have schema generated in the below format.
<xsd:schema xmlns:xsd="http://www.w3.org/2001/XMLSchema"
            xmlns:nxsd="http://xmlns.oracle.com/pcbpel/nxsd"
            xmlns:tns="http://TargetNamespace.com/InboundService"
            targetNamespace="http://TargetNamespace.com/InboundService"
            elementFormDefault="qualified"
            attributeFormDefault="unqualified"
            nxsd:version="NXSD"
            nxsd:stream="chars"
            nxsd:encoding="US-ASCII"
            nxsd:hasHeader="true"
            nxsd:headerLines="1"
            nxsd:headerLinesTerminatedBy="${eol}"
>
<xsd:element name="Root-Element">
    <xsd:complexType>
      <xsd:sequence>
        <xsd:element name="Record" minOccurs="1" maxOccurs="unbounded">
          <xsd:complexType>
            <xsd:sequence>
              <xsd:element name="typdoc" type="xsd:string" nxsd:style="terminated" nxsd:terminatedBy="~" />
              <xsd:element name="datdoc" type="xsd:string" nxsd:style="terminated" nxsd:terminatedBy="~" />
              <xsd:element name="nomdoc" type="xsd:string" nxsd:style="terminated" nxsd:terminatedBy="~" />
but the above schema do not write the header line in the FTP file.
Each of the element name should work as header row.
Below is the JCA configuration of the FTP
<adapter-config name="Payment_Details_FTP" adapter="FTP Adapter" wsdlLocation="Payment_Details_FTP.wsdl" xmlns="http://platform.integration.oracle/blocks/adapter/fw/metadata">
<connection-factory location="outbound/ftp/test1"/>
<endpoint-interaction portType="Put_ptt" operation="Put">
    <interaction-spec className="oracle.tip.adapter.ftp.outbound.FTPInteractionSpec">
      <property name="PhysicalDirectory" value="Test"/>
      <property name="FileType" value="ascii"/>
      <property name="Append" value="false"/>
      <property name="FileNamingConvention" value="1C_Extract.out%yyMMddHHmmss%"/>
    </interaction-spec>
</endpoint-interaction>
</adapter-config>
Please let me know if i'm missing some configuration here.
Regards
sujan

Remove "header" related attributes from the "schema" tag.
===================================
nxsd:hasHeader="true"
            nxsd:headerLines="1"
            nxsd:headerLinesTerminatedBy="${eol}"
===================================
And then, define another element like "Record" to read the header data.
http://docs.oracle.com/cd/E15523_01/integration.1111/e10231/nfb.htm#CHDBECJI

Many website will not open pdf files with firefox yet the same pages work fine with internet explorer default app

Typically, I have to use the default android internet app to view pdf files on my android. The last page I tried was my progressive website to view my policy documents. Firefox just does nothing when I click on a pdf file. When I go to the download folder, the file is there but has 0kb size (or empty). The default android app goes right to download and shows up in the top android status menu showing it is downloading.
This problem has been around for a long time now and is still not resolved.

Here is one I just tried. It works on my ipad2. When using my android, the file shows up in the download folder, but as usual it is an empty file. Even when the pop for "view file in cloud viewer" is choosen, it loads a blank page.
http://www.carlsalter.com/harley-service-manuals.asp
then choose the 2nd file in the list, file named "harley_davidson_flh electra glide 1970 owners manual v2_2"

Issue with FTP Adapter ListFiles files with spaces in the filename

Hi
I have an FTP adapter that does a ListFiles of all the files in a directory. It comes back and everything works fine however it removes all spaces from the filename meaning when I do the GET afterwards this fails as it is a different filename.
The filename is a0eQ0000000wJVdIAM~1~ technote316.TIF note the space between ~ and technote.
When a ListFiles is done I get the following request response in BPEL execution:
<messages>
<InvokeGetFilenames_FileListing_InputVariable><part name="Empty" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"><empty xmlns="http://xmlns.oracle.com/pcbpel/adapter/ftp/CommonServices/SalesforceNotifcationServices/GetFileNameFromFTPServer"/></part></InvokeGetFilenames_FileListing_InputVariable>
<InvokeGetFilenames_FileListing_OutputVariable><part name="filelist" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"><filelist size="1" xmlns="http://xmlns.oracle.com/pcbpel/adapter/ftp/CommonServices/SalesforceNotifcationServices/GetFileNameFromFTPServer"><file><directory>/salesforce/006Q0000007yKcd</directory><filename>a0eQ0000000wJVdIAM~1~technote316.TIF</filename><lastModifiedTime>1305507120000</lastModifiedTime><creationTime>0</creationTime><size>1906643</size></file></filelist></part></InvokeGetFilenames_FileListing_OutputVariable></messages>
This then follows with a GET that fails:
<messages><input>
<InvokeGETfile_SynchRead_InputVariable><part name="Empty" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"><empty xmlns="http://xmlns.oracle.com/pcbpel/adapter/opaque/"/></part></InvokeGETfile_SynchRead_InputVariable></input><fault>
<bpelFault><faultType>0</faultType><remoteFault xmlns="http://schemas.oracle.com/bpel/extension"><part name="summary"><summary>Exception occured when binding was invoked.
Exception occured during invocation of JCA binding: "JCA Binding execute of Reference operation 'SynchRead' failed due to: No Data to process.
No Data to process.
File /salesforce/006Q0000007yKcd/a0eQ0000000wJVdIAM~1~technote316.TIF to be processed was not found or not available or has no content
The invoked JCA adapter raised a resource exception.
Please examine the above error message carefully to determine a resolution.
</summary></part><part name="detail"><detail>550 /salesforce/006Q0000007yKcd/a0eQ0000000wJVdIAM~1~technote316.TIF: No such file or directory</detail></part><part name="code"><code>550</code></part></remoteFault></bpelFault></fault><faultType>
<message>0</message></faultType></messages>
I'm guessing its some use of the jca.message.encoding I can't find anything that really explains this though. Just the http://download.oracle.com/docs/cd/E12839_01/integration.1111/e10231/adptr_propertys.htm link.
Any help would be greatly appreciated.
Thanks

Hi PG,
Is your private file in the form of Java Keystore (.jks)? I had used .ppk file and it was a success.
If it is .jks in your case, try using the same password for private key as of keystore file (.jks). I hope you're not supplying any PASSWORD in the Adapter properties.
Regards,
Neeraj Sehgal

How to access a url in file receiver CC with space in the folder name?

Hi
PI 7.11 sp4:
In a file receiver channel I would like to send the message to this folder:
de-prod.dk\bu\something\something\PTI eventstanden\archive\"
But I get this error message:
"Target directory 'F:\usr\sap\XP7\DVEBMGS02\j2ee\cluster\server0\"\de-prod.dk\bu\something\something\PTI eventstanden\archive"' does not exist"
My question is: where the f.... does it get the 'F:\usr\sap\XP7\DVEBMGS02\j2ee\cluster\server0\ from, and how can I fix it?
One issue is the space in the folder name. I have tried to replace the space with %20 and then remove the "" s around the whole url, but without any luck.
When I log on the server on which Pi is running I can access the folder using the mentioned url including the ""s.
All suggestions would be highly appreciated!
MIkael

> But I get this error message:
>
> "Target directory 'F:\usr\sap\XP7\DVEBMGS02\j2ee\cluster\server0\"\de-prod.dk\bu\something\something\PTI eventstanden\archive"' does not exist"
>
> My question is: where the f.... does it get the 'F:\usr\sap\XP7\DVEBMGS02\j2ee\cluster\server0\ from, and how can I fix it?
It comes from the "
Anything else but \ is treated as local folder under working directory of PI
> One issue is the space in the folder name. I have tried to replace the space with %20 and then remove the "" s around the whole url, but without any luck.
It works for me just to copy the folder from Windows explorer into channel config. With space and without ".

Will B2B Adapter receive operation with default triggers the SOA Composite

Similar Messages

Maybe you are looking for