Will CF9 cfexchangecalendar access public calendars in Exchange Server 2007?

We need to create something in CF9 that will allow us to access public calendars in Exchange Server 2007. I've Googled it but only come up with dead ends. Any help would be appreciated.

I ran into the same situation recently, and found out that you need to make sure InternalClientsRequireSSL is set to false.
To verify: Run Get-OutlookAnywhere | fl Identity, *ssl
If it is true, try setting it to false.
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread

Similar Messages

Mail / Calendar with Exchange Server 2007

Hi all,
We have a problem with Apple Mail and Calendar (Mountain Lion) connected to an Exchange Server 2007.
Apple Mail for no reason doesn't show the available data on the server. At first all goes right but after a few hours the data get corrupt. Folders disappear, mails aren't shown, ... The folders and mails are there in the server. I can check that with Outlook for Mac or on a collegues machine on Windows.
I tried:
- deleting the mail cache and mail data and restart
- removing the accounts and setting them up again
- creating a new user and trying mail in that user
None of those solved my problem.
Apple Calendar doesn't sync its data correctly. Example:
I create an event in calendar A. From that event I onvite calendar B to join the event. So far, so good. Everything just syncs fine. Then for some reason I delete the event from calendar A. In the server the event is still there. I checked in Outlook. This error is reproducable.
I tried:
- naming the user to <WORKGROUP>\<user>
- deleting the calendar cache and calendar data
None of those solved my problem.
Can anybody help me with this?

Hi and Welcome to the Forums!
The configuration I think you have is MS Exchange on the back end fronted (to the Internet) by Outlook Web Access (OWA). As such, Blackberry Internet Service is the interface between OWA and the BB...there is no direct interaction between the BB and the Exchange server. As such, only email will reconcile wirelessly in this configuration. Calendar, contacts, and other items must be reconciled via USB/BT tether.
Now, that said, there is a free solution to do what you desire -- it's called BES Express. BES is BlackBerry Enterprise Solution and provides OTA sync of email, calendar, contacts, etc. Full BES is not free. But BES-X is. If you truly require full reconciliation of all things from Exchange, I recommend you research BES-X.
Good luck!
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

My new Airport Extreme will not allow access to a Microsoft Exchange server

I just installed a new Airport Extreme at home and now I cannot access my work e-mail which is on a Microsoft Exchange Server. If I go back to my old wi-fi Access Point my work e-mail comes in and out with no problems, but when I hook the Airport Extreme it keep saying the connection is bad and to check the e-mail username and password.

If you setup the AE wrongly, as a router when you already have a router, then you must bridge the AE. Apple nowadays reckon they should be top dog and force the AE to router mode.. unfortunately this is wrong on at least 50% of the setups and their support says double NAT doesn't matter.. well it does matter.
You can do a simple test.. traceroute 8.8.8.8 from terminal or network utility.
If you find two separate private IP addresses the AE is setup wrongly and it must go to bridge mode.
Eg.. here is mine.. you will note there is hop 1, the main router.. 192.168.2.254 and the next hop is internet IP.
What you want to avoid is 10.0.1.1 and then 192.168.1.1 or any other combo of private IP addresses.
If the AE is setup correctly and there is only a single private IP in the traceroute then you have a different issue.
The AE is blocking the ports required for you to access your mail.
You will need to setup manual port forwarding to get this working. There is no firmware fix as this issue is in every firmware for the AC version AFAIK, but certainly if you are trying on previous firmware check for upgrade.
Port forwarding check what ports are required..
https://support.microsoft.com/kb/176466/EN-US
And folllow the instructions to open them.
https://discussions.apple.com/docs/DOC-3415

Migrating Public Folders on Exchange Server 2007 SP1 to Exchange Online\Office 365

Hello,
Our company is looking to migrate from Exchange 2007 on premises to Exchange Online/Office 365. We have a number of public folders on our exchange server that function similarly to how the new shared mailboxes work in Exchange Online. That is to say that
we have many outside users (customers and wholesale dealers) emailing this public folder ([email protected]) and our end users are given permission to view and respond as themselves ([email protected]). I've been looking all over but haven't found a clean
way to migrate the current public folders directly into shared mailboxes. I'd just start from scratch, but we want to keep the records of the emails we've received at these public folders for customer support reasons. Can anyone help?

Hi psh8989,
According to your description, I know that you want to migrate public folder from Exchange 2007 to Office 365.
Since Office 365 is different from Exchange On-Premises, I suggest ask Office 365 Forum for help so that you can get more professional suggestions. For your convenience:
http://community.office365.com/en-us/default.aspx
However, I can also share some information for your reference : )
Based on my knowledge, Exchange supports moving your public folders to Office 365 and Exchange Online from Exchange 2007 SP3 RU10 or later. I notice that your Exchange server version is SP1, please upgrade to SP3 RU10 first and perform migration.
More detailed information to see:
Migrate legacy public folders to Office 365 and Exchange Online
http://technet.microsoft.com/en-us/library/jj983799(v=exchg.150).aspx
Thanks
Mavis Huang
TechNet Community Support

Is there a way to sync Pre-MS Exchange Server 2007 (Service Pack 1) Calendar?

Hello all,
I think my company must be using Pre-Microsoft Exchange Server 2007 with Service Pack 1 for our exchange server, because
I can only set up company Exchange account on MS Entourage, not the new Outlook
I can only set up the same exchange account only on iPad and iPhone (able to view in Mail, Calendar, Contacts & Reminders)
But
I am unable to use Lion's Mail, iCal and Address Book to see my Exchange account
For the moment, I am not really concern about mail and addresses,
but can I see my Exchange calendar on my desktop iCal? How do I set it up?
I guess the most obvious and straight forward way, for now, is to view on my iPad :-) But it is really funny that the iDevices are backward compatible but yet Lion OS cannot...
Thanks and cheers.

Hi,
Yes it will work, it says enterprise because it works there as well.
Thanks
Bifocals
Click Accept as Solution for posts that have solved your issue(s)!
Be sure to click Like! for those who have helped you.
Install BlackBerry Protect it's a free application designed to help find your lost BlackBerry smartphone, and keep the information on it secure.

Cannot Access EAC/ECP on exchange server 2013 after installation

Hi,
I can not Cannot Access EAC/ECP on exchange server 2013 after installation . Error 404.4 code 0x80070002
Help!
Thanks,

Hi Florin
Did you try accessing EAC by using below link
https://<Exchange_2013_CAS_FQDN>/ecp?ExchClientVer=15
Please access EAC via Internal URL: https://<CASServerName>/ecp
Finally ensure that you have logged in as administrator as well as this might be problem as well
Remember to mark as helpful if you find my contribution useful or as an answer if it does answer your question.That will encourage me - and others - to take time out to help you Check out my latest blog posts on http://exchangequery.com

Public Folder in exchange server 2013

We are using an legacy application developed in Classic ASP. In this application we are rendering the message items in the public folder on the exchange server 2003.
Now we are going to migrate our exchange server 2003 to exchange server 2013.
Do exchange server 2013 have public folder? Is this migration have impact on the public folders usage.
Please let me know for any clarifications.

There will be no co-existence support for Exchange Server 2003. In your scenario, you will have to migrate twice, once from Exchange 2003 to Exchange 2007 or 2010, then again to Exchange 2013 or another option you have to proceed that by using any third-party
migration tool to accomplish this task in one go. When you preparing to migrate mailbox, you can have a look at
exchange server deployment assistant to see the current recommended steps for your configuration. A good resource for swing migration direct from exchange 2003 to 2013 can be explored at
here.
In the same way, You cannot migrate public folders directly from Exchange 2003. You will have to move all public folder databases and replicas to Exchange 2007 SP3 RU10 or later. No public folder replicas can remain on Exchange 2003.
I would like to refer on couple of links mentioned below. It will help you better to clarify the scenario further :
Understanding the public folder architecture
Public folder migration

Mail receives OK but will not send for smtp account. Exchange server receives/sends OK

mail receives OK but will not send for smtp account. Exchange server receives/sends OK I'm away from home, using a family-member's wireless network that has always worked OK in the past. Today, the same problem occured while waiting in a hospital waiting lounge. Any ideas?

The outgoing mail server may be rejecting mail from your network address. Typically that happens when your mail service provider is also your ISP, and you connect to it from another network. The SMTP server will allow connections without a password from anywhere, but it will only relay mail from within the ISP's network. It could also be that your account on the server has expired or been suspended.
If you need to send mail from outside your ISP's network, use an independent mail service provider. I don't have a specific recommendation.

Securely Access Exchange Server 2007 through ASA 5510 using Outlook

Is there any way to access a MS Exchange Server 2007 on Windows server 2008 through an ASA 5510 running 8.4 with a full MS Outlook client (not using OWA - web browser)? OWA is currently working fine but I was wondering if access via the full Outlook client is possible and more importantly...is it opening up too many ports on my 5510? Any help is much appreciated!
~John

Hi John,
For that scenario, a remote access VPN is probably the best way to go (either the traditional IPSec client or SSL VPN/AnyConnect). This config guide lists your options on the ASA:
http://www.cisco.com/en/US/docs/security/asa/asa84/configuration/guide/vpn_ike.html
-Mike

Does anyone know if OS X Lion will support Exchange Server 2007?

I'm trying to find out if OS X Lion will support exchange server 2007. I cannot find any information regarding this on the web so I'm trying here. The only information I can find is that Lion supports exchange 2010 but nothing about 2007. I hope someone can help.
PS. I had to post here as there isn't a OS X Lion community yet. Sorry if this isn't appropriate.

Nobody knows that could tell you. Exchange server has some support under Snow Leopard's built-in Mail client, as well Microsoft Outlook (part of Microsoft Office 2011 for the Mac), as well webmail support through several web browsers for the Mac. Any Intel Mac, which Lion runs can also run Windows in virtualization. See my FAQ* on those options if none of the options above work in Lion:
http://www.macmaps.com/macosxnative.html#WINTEL
I'm sure by the end of July there will be a more definitive answer, assuming Apple keeps to its set date.

MimeMessage.reply() issue with MS Exchange Server 2007 Emails

I have an application that retrieves emails from an MS Exchange Server 2003 mailbox. The data from each message is read, validated and conditionally loaded to a table. If the message doesn't pass validation, a rejection email is sent back to the sender with an error message and a copy of the email. (We're using Java 1.5. However, I test with both 1.5 and 1.6.)
Also, if the message passes validation, positive notification is sent back to the sender.
Both processes use the method: javax.mail.Message.reply()It's coded as:
MimeMessage reply = (MimeMessage) message.reply(false);My organization is in the process of migrating to MS Exchange Server 2007. We've found that the reply() method no longer finds the sender method, thus unable to create a reply message. The error message we receive is:
javax.mail.SendFailedException: No recipient addresses
     at javax.mail.Transport.send0(Transport.java:110)
     at javax.mail.Transport.send(Transport.java:80)
     at org.ccci.gms.datacollector.DataCollector.sendReply(DataCollector.java:514)
     at org.ccci.gms.datacollector.DataCollector.processMessages(DataCollector.java:162)
     at org.ccci.gms.datacollector.DataCollector.main(DataCollector.java:101)After creating the MimeMessage object from the reply() method, I printed out the email header detail from both 2003 and 2007 messages. You'll note from below that the "To" or recipient address is missing from Server 2007.
MS Exchange 2003 works fine
From: [email protected]
To: [email protected]
Subject: Re: Report
In-Reply-To: <[email protected]>MS Exchange 2007 no longer works
From: [email protected]
Subject: Re: Reports
In-Reply-To: <[email protected]>I know I could just use the "addRecipient()" method to get around this problem. I wanted to know if anyone has encountered this issue. Please share the resolution. Any suggestions will be greatly appreciated.
Thanks,
LaelW

When the original message is accessed using IMAP, the reply method uses the information in the
IMAP ENVELOPE to determine where to send the reply. It first looks for the Reply-To address
in the ENVELOPE, then the From address.
Interestingly, when not using IMAP, the getFrom method returns the Sender header if the From
header is empty. The IMAP-specific code doesn't do that, although perhaps it should.
It would be interesting to compare the ENVELOPE data from the protocol trace in the two cases.
The ENVELOPE data will follow this syntax:
envelope     = "(" env-date SP env-subject SP env-from SP
          env-sender SP env-reply-to SP env-to SP env-cc SP
          env-bcc SP env-in-reply-to SP env-message-id ")"
So it's the first three address fields after the Subject that are relevant. If the From and Reply-To
fields are NIL, but the Sender field has a valid address, let me know. I should probably fix the
IMAP provider to fall back to the Sender field if the From field is missing.

Hidden Contact Subfolders are visible on iPhone after sync with Exchange Server 2007

Hello,
We have encountered an issue where synchronizing the iPhone with Contacts from an Exchange Server 2007 mailbox, causes hidden contact subfolders (from Outlook) to be visible and appear in the Groups list in the Contacts App on the iPhone. This does not occur with Exchange Server 2010 mailboxes.
We have a 3rd party application that creates hidden subfolders in the default Contacts folder on Exchange Server 2007 mailboxes. The hidden folders do not display in the Outlook client, Blackberry or on an Android phone. We did see that they were showing up in Outlook Web Access until we applied this Microsoft Exchange Server 2007 Service Pack 3 Rollup 2 patch unto the Exchange server:
http://support.microsoft.com/kb/2210042 - A sub contact folder is still visible after you set the "PR_ATTR_HIDDEN" attribute to "True" in an Exchange Server 2007 environment.
After the patch was applied, the hidden contacts do not show up anywhere else. However, when we synced the mailbox to an iPhone and synced existing contacts, all of the hidden folders appear in the Contact Groups list. Is there a way to hide the hidden sub contact folders on the iPhone and prevent them from appearing in the Contact Group lists?
Any help provided would be most appreciated.
Thanks and Best Regards

Hi SBuchan,
I have an open case with Microsoft about it. It is an issue with ActiveSync in Exchange 2007 that sends the hidden objects. Microsoft tried to resolve this in Exchange 2010 by sending a delete message after sending the hidden objects to remove them from the device. Am awaiting to see if they will approve a design change to Exchange 2007 ActiveSync to prevent the synching of hidden objects.

Exchange Server 2007 Transport Agent Issue

This is the first time i am working on Exchange Server Development. Below is a simple Transport Agent that i am using, this agent should simply update the email Subjects
as shown below in the code.
using System;
using System.Collections.Generic;
using System.Text;
using Microsoft.Exchange.Data.Transport;
using Microsoft.Exchange.Data.Transport.Smtp;
namespace MyAgents
public sealed class MyAgentFactory : SmtpReceiveAgentFactory
public override SmtpReceiveAgent CreateAgent(SmtpServer server)
return new MyAgent();
public class MyAgent : SmtpReceiveAgent
public MyAgent()
this.OnEndOfData += new EndOfDataEventHandler(MyEndOfDataHandler);
private void MyEndOfDataHandler(ReceiveMessageEventSource source, EndOfDataEventArgs e)
e.MailItem.Message.Subject = "This message passed through my agent: " + e.MailItem.Message.Subject;
Below is the Powershell script i am using to install the Agent.
Net Stop MSExchangeTransport
Install-TransportAgent -Name MyAgent -AssemblyPath EmailLogger.dll -TransportAgentFactory MyAgents.MyAgentFactory
Enable-TransportAgent -Identity MyAgent
Net Start MSExchangeTransport
Agent installed successfully using Exchange Management Shell.
Now when i send/receive emails in exchange, Email subjects are not modified. Emails have their original subjects. I don't know why?
I also performed the steps mentioned in below links to debug the Agent but breakpoints are not being hit by Visual Studio Debugger.
sf-tools.net/Messaging/tabid/55/EntryId/163/Exchange-2010-Transport-Agent.aspx
stackoverflow.com/questions/12347123/debugging-ms-exchange-2007-transport-agent
omarjames.com/blog/index.php/debugging-exchange-transport-agent/
My System Configuration
I am using the Exchange Server 2007 Virtual Machine provided by Microsoft from link below
microsoft.com/en-pk/download/details.aspx?id=14901
I also installed the Visual Studio 2008 on the VM for debugging.
Please help me in resolving the issue?

How are you testing this ? a SmtpReceiveAgent will only fire when the server receives email over SMTP. So if your just logging on and sending an Internal Email (eg mailbox to mailbox) or sending Email externally then the
SmtpReceiveAgent wont fire. For a single server if you want to capture all email you need to use a router agent see
http://blogs.technet.com/b/postwoman/archive/2010/09/14/step-by-step-how-to-create-a-routing-agent.aspx
. If you want to test what you have try sending an email to mailbox over SMTP using an SMTP client or Telnet
http://exchange.mvps.org/smtp_frames.htm
Cheers
Glen

Exchange server 2007 Service Pack problems SBS 2008

I am Running Exchange server 2007 on Small Business server 2008 (SBS 2008). I tried to install SP2 but it fails both windows update and manually. Can anyone first advise me what version I'm currently running?
Help / about form Exchange Management Console displays:
Version 08.01.0436.000
And running repair on Exchange server from programs and features displays 2007 SP1 setup. So I believe SP2 to be next I have also ran SP3 but this fails.
Here is the end lines from a log:
[03/05/2014 08:54:13] [0] Setup will run the task 'uninstall-msipackage'
[03/05/2014 08:54:13] [1] Setup launched task 'uninstall-msipackage -logfile 'C:\ExchangeSetupLogs\ExchangeSetup.msilog' -ProductCode '24b2c164-de66-44fe-b468-a46d9d5e6b31' -PropertyValues 'BYPASS_CONFIGURED_CHECK=1 DEFAULTLANGUAGENAME=ENU''
[03/05/2014 08:54:13] [1] Beginning processing.
[03/05/2014 08:54:13] [1] Property 'PackageName' is 'EXCHANGESERVER.msi'.
[03/05/2014 08:54:13] [1] Removing MSI package with code '24b2c164-de66-44fe-b468-a46d9d5e6b31'.
[03/05/2014 09:09:01] [1] [ERROR] Unexpected Error
[03/05/2014 09:09:01] [1] [ERROR] Unable to remove product with code 24b2c164-de66-44fe-b468-a46d9d5e6b31. Fatal error during installation. Error code is 1603. Last error reported by the .msi package is 'Could not open key: UNKNOWN\Components\7ABFE44842C12B390AF18C3B9B1A1EE8\461C2B4266EDEF444B864AD6D9E5B613.
Verify that you have sufficient access to that key, or contact your support personnel. '.
[03/05/2014 09:09:01] [1] [ERROR] Fatal error during installation
[03/05/2014 09:09:01] [1] Ending processing.
[07/05/2014 19:45:17] [0] End of Setup
There is a registry key to match this and The administrator account used for setup has access to it i believe??? What does this log mean?

Hi,
This error indicated that your account missed registry permissions on: HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Installer\UserData\S-1-5-18\Components\ 7ABFE44842C12B390AF18C3B9B1A1EE8\461C2B4266EDEF444B864AD6D9E5B613
Please check whether you have permission. You can also check whether the key have permissions inherited from the Parent Key or not.
After changing the permission, please run the setup again.
Best Regards.

After upgrading Exchange Server 2007 to SP3 with update rollup 13, OWA not working

Hi,
We have just installed Service Pack 3 and update rollup 13 on our Exchange Server 2007, but unfortunately our OWA has gone inaccessible.
PROBLEM- The following error comes up when we try to access OWA :
Exception
Exception type: Microsoft.Exchange.Clients.Owa.Core.OwaInvalidConfigurationException
Exception message: Object reference not set to an instance
of an object.
Call stack
Microsoft.Exchange.Clients.Owa.Core.OwaConfigurationManager.CreateAndLoadConfigurationManager()
Microsoft.Exchange.Clients.Owa.Core.Globals.InitializeApplication()
Microsoft.Exchange.Clients.Owa.Core.Global.ExecuteApplicationStart(Object sender, EventArgs e)
Inner Exception
Exception type: System.NullReferenceException
Exception message: Object reference not set to an instance
of an object.
Call stack
Microsoft.Exchange.Clients.Owa.Core.Configuration.CheckPublicFolders(ADSystemConfigurationSession session, ADObjectId[] pfdbIds, Boolean& allLegacy, Boolean& allLater)
Microsoft.Exchange.Clients.Owa.Core.Configuration..ctor(ADSystemConfigurationSession session, String virtualDirectory, String webSiteName, ADObjectId distinguishedName, Boolean isPhoneticSupportEnabled)
Microsoft.Exchange.Clients.Owa.Core.OwaConfigurationManager.LoadConfiguration()
Microsoft.Exchange.Clients.Owa.Core.OwaConfigurationManager.CreateAndLoadConfigurationManager()
ACTION TAKEN SO FAR :
1. Removed OWA virtual directories and recreated them again.
2. IIS has been reset.
3. Restarted the HUB/CAS server.
4. Created public folder database.
Even after doing all these activities, owa is still inaccessible. Please help.
Regards,
Ankur

Hi Ankur,
From your description, you can't access to OWA after upgrading Exchange server 2007 to SP3 rollup 13. Firstly, please locate to C:\ExchangeSetupLogs and make sure that it is a successful installation. If not, this issue often occurs.
If it is a successful upgrading, please follow the steps below for troubleshooting.
1. Open IIS Manager, click Default Web Site -> Authentication, make sure that Anonymous Authentication and Windows Authentication are enabled.
2. Click Default Web Site -> SSL Settings, check "Require SSL" and click Ignore.
3. Click Default Web Site -> HTTP Redirect, check Redirect (enter your
https://URL), check "Only redirect" box and Status code Found 302.
4. Expand Server Configuration -> Client Access ->double click owa ->Authentication tab. Check the Basic Authentication and check the Use forms-based authentication button Logon Format: Domain\user name.
Hope it helps.
Best regards,
Amy Wang
TechNet Community Support

Will CF9 cfexchangecalendar access public calendars in Exchange Server 2007?

Similar Messages

Maybe you are looking for