Will hard case fit inside incase leather pouch?

After getting a few scratches on my ipod, I've ordered Ice Creme to clean them off and Martin Fields to protect against further damage. Right now, I have an incase leather pouch, but I'd like a hard plastic case that completely covers the ipod all the time (I think I've gotten a lot of scratches just from sliding the ipod in and out of the case). I've read a lot on the forums and am torn between Agent 18, iskin, and PodsPlus. Does anyone know if any of these would fit inside the incase pouch? I like clipping the incase to my belt while listening to the ipod, but want something for screen protection while I'm watching.
I really have done my research on the forums, but I'm still torn. If none of these three will fit inside the incase, which do you think offers the best overall protection (from scratches and dropping)?
Thanks!

please take note in this post. I have had experience with all 3 types of cases.
I mention my experiences with these vasrious cases from owning 3 ipods previously. I have used a leather case,a iskin case, and lastly a aluminum case. Out of all 3 the hands down best is the aluminum case. why? well my last ipod (photo) was covered in a alumium case and in my experiences it was the best of all. I had the misfortune of dropping it 4 feet to the asphalt and i was very worried but i noticed that the ipod was perfectly safe and fine. nothing was wrong with it. the aluminum case only sufered minor scratches from the drop. the other perfection in this especially the podplus case which i use for my ipod video is the screen protection that is built into the case its not seperate liek the iskin but is fixed to the case. the interior of the podplus case includes neoprene. this allows a snug fit and doesnt alow for any scratches because the neoprene is non abrasive. removing the ipod is simply just opening the top lid that is snugly latched to the case.
the iskin case is good but i noticed flaws in it i didnt like for the price i payed. the silicone case attracts dirts easily and needs to be cleaned. The silicone also wears easily and after awhile shows signs of tearing in areas like the dock connector opening. As well the protective shield moves around on top of the screen of the ipod therefore scratching it....not good. I as well droped the ipod in the iskin case only 2 feet and the case absorbed the drop easily and my ipod was perfectly fine ..I still didnt like this case overall because of the signs of wear and the bad screen protection it offered. the beilt clip is also a joke on the iskin case too. removing the ipod from the iskin case is cumbersome becasue you can only remove it from the center clickwheel opening (very annoying).
the leather case was good, aesthically pleasing to the eye but i still noticed i removed the ipod from the case often to sync it to my computer and to access it to. To much work for getting to your ipod when you want to use it and protect it as well.
Overall i would recommend the podplus case over any other alternative specifically for the drop factor adn the overall design it has over the leather case or the iskin silicone case. Also the podplus case is only $29.99 no tax no shipping fees.I would also suggest getting a clear film to protect the front face of the ipod. the links below show what i have for my ipod now.
http://www.podsplus.com/index.cfm?fuseaction=product.display&Product_ID=157
http://www.podsplus.com/index.cfm?fuseaction=product.display&Product_ID=160
hope this helps
GFF

Similar Messages

  • Will any Macbook Pro 13" hard case fit my regular Macbook that is aluminum also?

    I am trying to find a hard case that fits my aluminum 13" macbook. It is not a pro and Apple doesn't make them anymore. Will the Macbook pro 13" fit my Macbook 13"

    No, there's a different port arrangement.
    MacBook
    MacBook Pro (With a FireWire800 port and an SD card slot)

  • Do unibody hard cases fit pre-aluminum macbooks?

    I have an Incase hard shell for my 13" black macbook.  I bought my computer in November 2008, right after the aluminum laptops were introduced, so as to save money.  My hard case has held up nicely, but I just noticed that some of the holders (the things that hook to the top cover of the computer) have broken off so it's getting loose.  I am having a hard time finding any cases that are for this particular model (like...no luck at all).  Do the unibody cases fit my model?  Or does anybody know where I can get a good hard cover (preferably blue) for it?  I appreciate any help you can give me.  Thanks!

    In my opinion, you should get a unibody MacBook or a pre-owned MacBook Pro. But if you are only considering a MacBook (and not a Pro/Air), I would say that, even though the latest MacBook model might be a polycarbonate one, the unibody is way more durable and looks a lot better. Regarding performance, you could always upgrade the hard disk and the RAM so that it's faster. I would reccomend upgrading to a 1 TB hard disk (from Samsung; theirs is really good) and 4 GB of RAM (from Strontium/Hynix/Samsung). That way, you would get a cheap MacBook that looks awesome and has good performance. Just check that there are no dents/scratches on your pre-owned MacBook. Good luck!

  • Will iPad3 cases fit the new iPad4 (besides the obviously smaller lightning connector)?

    Just wondering if there are any physical differences between the devices (size, thickness, button/jack/speaker placement, etc.) that would prevent me from using an iPad 3 case on a new iPad 4 (aside from the smaller lightening connector)?
    Thank you for your replies and assistance :-)

    Yes, the iPad 3 case will fit the iPad 4.

  • Will an ipad mini when fitted with a speck smartshell case-still fit inside a incase neoprene pro sleeve

    will an ipad mini when fitted with a speck smartshell case still fit inside an incase neoprene pro sleeve

    Probably not. I tried with a seck case and a Maccase sleeve. Don't fit.

  • I need a case for the X-fi, does it fit inside the zen plastic ca

    Just bought the 8gb one and I need a case for it(was wondering if it fits inside the ZEN plastic case and would all the holes and buttons be available?). I want to carry it a strap around my neck but I could propably get used to keeping it in my pocket if it doesnt fit inside the zen case :P. And one final question. Does the silicone case for the x-fi protect the screen? If it doesnt and if it doesnt fit inside the zen case then the only case that I should get is the leather case for x-fi?
    Thanks in advance!

    no, you can't put your Zen X-Fi into the case fpr Zen.
    because of the buttons' location and player's depth.
    therefore you need to buy a new one.
    i have a silicon casefor X-Fi.
    it doesn't protect the screen actually.
    i think it can protect the player from fingerprint or scratch.
    however, it makes the nine buttons harder to press.
    i don't have a leather case so i have no idea about it.
    hope it helps.

  • Will iPhone 3Gs fit into iPhone 3G cases?  Any difference in size/Controls?

    Will the iPhone 3Gs fit into iPhone 3G cases? Any difference in size/Controls?

    I purchased an incase slider before my 32 GB 3GS arrived. When I put the phone in it today, it was so incredibly tight that I almost couldn't get the phone back out of it. I called the incase company and they said that despite Apple's claims that the phones are identical it is possible that the 32 GB phone is slightly thicker and is causing problems with certain slider cases. Incase is nice enough to send me a replacement (even though I bought from apple store online) when they have verified that their cases fit the new phones. My previous iPhone was a 2G so I could not tell if the new case would have fit the 3G. I guess, try before you buy.

  • Can you save your itunes and songs onto an external hard drive so that incase your computer crashes you will still have all your music?

    Can you save your itunes and songs onto an external hard drive so that incase your computer crashes you will still have all your music?

    The procedures below are for "moving" your library but as long as you don't delete it from your internal drive you are basically backing up.
    iTunes: How to move your music to a new computer [or another drive] - http://support.apple.com/kb/HT4527
    Simple answer:  Copy your whole iTunes folder to the external drive.  For subsequent backups you might want to learn about cloning and using a tool that only does incremental backups of recently changed items rather than copying all your files each time.

  • Will the ipad 3 case fit the ipad 4

    I am trying to find a folio/hard case for my new ipad 4 and can only find ipad 3 cases.  Will these work.

    Thank you,

  • Will the iPhone 5 cases fit the iPod Touch 5?

    Will an iPhone 5 case fit the iPod Touch 5?

    Yes, Actually it fit really well and the dimension difference is technical not physical so the iPhone case hugs the iPod comfortably and there is not rattle or movement whatsoever.
    I " don't think so" like others.. I've done this and own one!

  • Will the new iPad cases fit on an IPad 2

    Will the new iPad cases fit on an IPad 2?

    It appears that it only fits the new iPad. Here is the description page. Go down to the lower left corner where it talks about compatibility.
    http://www.targus.com/US/productdetail.aspx?regionId=7&sku=THZ15601US&PageName=T argus%20Versavu%20%7C%20Targus%20USA&productCategoryId=5&bucketTypeId=0&searched Terms=Targus%20Versavu&navlevel1=&cp=&bannertxt=Search%20Results%20Targus%20Vers avu
    This one fits the iPad2 and it is a VersaVu
    http://www.targus.com/US/productdetail.aspx?regionId=7&sku=THZ045US&PageName=Tar gus%20Versavu%20%7C%20Targus%20USA&productCategoryId=5&bucketTypeId=0&searchedTe rms=Targus%20Versavu&navlevel1=&cp=&bannertxt=Search%20Results%20Targus%20Versav u

  • Will iPad 3 case fit an iPad 4

    I am giving an ipad 4 for Christmas. Will an ipad 3 case fit an ipad 4?

    Yes!  I use one.
    Note the dock connectors are different sizes, with the iPad 4 being smaller than the iPad 3.  So if your case has some special provision for the dock connector, that may be a factor.
    But the devices are the same size.

  • Will an iPad mini 2 case fit the new iPad mini 3?

    will an iPad mini 2 case fit an iPad mini 3?

    Yes, the dimensions of the iPad Mini 2 and iPad Mini 3 are identical.

  • Will the case mate tough extreme case for the iPhone 5 fit the 5c phone

    I am having trouble finding a case tht will fit the 5c. Will the Case Mate Tough Extreme fir the 5c

    No it won't. The dimensions are different.

  • Will this Solid State Hard Drive Fit in a Desktop Computer?

    Will this Solid State Hard Drive Fit in a Desktop Computer?
    http://www.newegg.com/Product/Product.a … 6820208315
    Any info is greatly appreciated; thanks!

    I think you'll need two adapters as well. One to mount a 2.5" drive in a 3.5" bay, and one to convert the smaller 2.5" IDE connector to the bigger type found in desktop PCs and a separate power plug.
    Here's two examples. I'm not recommending either of these products, they're just the first ones I found!
    http://www.newegg.com/Product/Product.a … 6812116211
    http://www.newegg.com/Product/Product.a … 6817984006

Maybe you are looking for

  • EBP SUS NO PO RESPONSE and Invoice XML MESSAGE CREATED

    Hi All, We have configured EBP - SUS on SRM 7 server with extended classic scenario.PO's are transfering fine from EBP to SUS and are visible in SUS also expected follow on documents are PO response,Confirmation,Invoice.But wen we process the po and

  • Slow Motion Sequence is Stroby

    I just edited together a slow mo sequence, with all of the images at 50%. Frame blending is on but I still get a stroby appearance - not noticible on the computer screen but very apparent on my NTSC monitor. I've created slow mo before (with the same

  • Error 8010 with itunes & ipad

    I am currently on yosemite on my mac mini. I have an Ipad with ios 8 in it. My itunes is updated to 12.0.1. When i sync my ipad, it gets synced but when i try to update apps through itunes it gives me an error : An unknown error occurred 8010. Tried

  • Catching errors in Web Dynpro for Java when thrown from RFC Raise Exception

    Hello Developers, I'm looking for information that explains how a Web Dynpro for Java application responds and processes errors that are thrown from a Raise Exception event within an RFC. The Exceptions do not appear to be part of the Model and I can

  • Accruals in Tax Procedure

    Hi Experts, Can any body through some light on Accruals in Tax Procedure and configuration steps for the same.  Thanks in advance