Will not get pass set up

when I turn on My nano it will not let me select lanage. or move pass that

Been through these?
The Five Rs.

Similar Messages

T/X will not get pass the palm screen

TX froze,
tried to reset, however it keep going from the orange palm screen to the gray palm screen.
i can not get it to reset.
Post relates to: Palm TX

I would recommend checking to see if you're performing the reset correctly. But, in regards to your particular issue, I would suggest that you perform a hard reset(performing a hard reset will erase all data thats currently stored on the device). If you would like to do a hard reset please click or paste the following URL into your browser: http://kb.palm.com/SRVS/NUA/launchKB.asp?c=42094
Post relates to: Treo 800w (Sprint)

HP Mini110-1192EO will not get passed F9/F10 boot screen

This problem relates to an HP MINI110-1192EO purchased in Sweden little over a year ago and is therefore out of store warranty.
1) The HDD crashed and has been replaced.
2) Installation by recovery from HP Partition is thuis impossible and installing Windows 7 Starter from install media fails.
3) Windows XP Retail install fails with BSD (Blue Screean of D.)
4) Installing Linux Ubuntu 11.04 LTS 32 bit worked, then failed on language install hanging on boot screen as described above AGAIN.
5) Replaced and checked disk, and now I cannot select F9 to boot from CD/DVD or USB
6) Nor can I select F10 to enter bios.
7) Unplugged battery to CMOS / BIOS and reset the whole thing. Got the time reset and now it still hangs on boot screen showing F9/F10 all the time without the 5 sec. timer ever coming up.
Had to unplugg battery pack and run ONLY on main power cord to be able to get this far even.
Before this it only showed the HP circular logo and not even F9 / F10 option.
So is this now nothing more than a piece of gloryfied plastic sinker or is there a recovery for the machine at all in sight?

Its a hardware issue, possibly memory but may be a bad motherboard.

I have updated my iphone 5s to iOS8 but it has my old icloud account, how can i change the icloud email address as i can not get passed this page?? please help :-(

i have updated my iphone 5s to iOS8 but it has my old icloud account, how can i change the icloud email address as i can not get passed this page??
I do not know the log in details and no longer have that icloud email address !!
please help :-(

That's Activation Lock. You will need to remember the Apple ID and password you used to set up the phone.
If you can't remember them, you can go to iforgot.apple.com to try to recover the information.
If you are the original owner of the phone & have proof of purchase, you can try calling Apple to see if they can assist also.
~Lyssa

HT201407 Can not get passed the screen where it asks me for Apple ID and password

Dear Apple,
My father and I recently switched our phones because he needed a better phone for business. I now restored the phone and i can not get passed the screen where i need his Apple ID and Passcode. The problem with this is that it would be easy if i knew the Apple ID and password, but my father does not remember any sort of info about his Apple ID or password! Please help me ASAP! Thank you so much for taking the time out of your day for me.
Sincerely, Paresh
<Personal Information Removed by Host>

Do not post your personal information on a public thread - not a good idea.
If your father does not remember his Apple ID that he set up iCloud and Find My iPhone with, have him go to: FORGOT APPLE ID to retrieve the Apple ID.
Then follow the prompts to reset the password.
If he doesn't remember the answers to the Security Questions, contact Apple Support to have them reset:
ACCOUNT SECURITY CONTACT NUMBERS
Once you know the Apple ID and the password, you will be able to proceed.
Cheers,
GB

Filters not getting passed in MDX query while using SAP BW with OBIEE

Hello,
I've been working on OBIEE with SAP BW as back-end. I've created some reports & those are working fine when there is less amount of data. But when I try to run a report with 3 dimensions & 1 fact it throws an error saying "No more storage space available for extending an internal table". When I checked MDX query, I found that the filters that I had applied to request & also selected from prompts are not getting passed in that query. So, I tried running a simple request using a simple filter in Answers. Although this request returns results but I can't see filter conditions in query. MDX query always show crossjoin but I can't see filter conditions anywhere.
Is it the normal OBIEE behaviour OR am I doing something wrong in there? Can you please help me out with this?
Thanks,
Rocky

Hello Sainath,
We tried those things. But it is still giving same error.
State: HY00. Code: 10058. [NQODBC][SQL_STATE:HY000][nQSError: 10058] A general error has occurred. XML/A error returned from the server: Fault code: "XMLAnalysisError.0X80000005". Fault string: "The XML for Analysis provider encountered an error: MDX result contains too many cells (more than 1 million)". (HY000)
The problem here, I think, is the filter parameters are not getting passed in the MDX query. Any idea why would that happen? Is there any setting to do so?
Thanks in advance for help.
Regards,
Rocky

Dual Ethernet will not connect if set to share Single IP address

The subject says it all. My trusty old Dual Ethernet will not connect if set to share Single IP address.
I cannot get anything but a self assigned IP address with it set to share a single IP address.
Before about Tuesday of last week I had connected to it a Mac mini, iMac, Dell Desktop, Dell Laptop, and PS3 all working fine. I think Comcast or Apple updated their system or Airport software and now the old dual Ethernet will not share a single IP address.

So far as I know, there has been no recent change in Apple's software affecting the Snow (a/k/a Dual Ethernet) base station. About 2-1/2 weeks ago, Apple distributed an update to AirPort software for Intel Macs running Tiger, but it would not have affected the base station.
Your topic implies that when the Snow is not set to share a single IP address (i.e., presumably, when "Distribute IP addresses" is unchecked in the Network pane of AirPort Admin Utility for Graphite and Snow), one of the computers is connecting to the Internet through the base station. I also imagine that the self assigned IP address you mention is the IP address of that computer, rather than of the base station, and that that computer obtains an IP address from Comcast when the Snow is not distributing IP addresses.
Assuming that that computer is connecting wirelessly, then whatever settings that computer is using for TCP/IP and PPPoE in the AirPort part of System Preferences, while the computer connects to the Internet, should be the ones used for the base station, in the Internet pane of AirPort Admin Utility for Graphite and Snow. (Most likely, it is simply "Using DHCP.") The IP address obtained from Comcast should be received by the base station, when it is set to distribute IP addresses in the Network pane, and the IP address should show up in the Internet pane. (When the Snow is distributing IP addresses, it has two IP addresses itself, a WAN IP address obtained from Comcast and a LAN IP address, 10.0.1.1, visible only to devices in your network.)
Even when the settings are correct, the Snow might not be able to obtain an IP address if your cable modem remembers the computer, which had been receiving the IP address previously. You'll probably need to shut down the computers and unplug power to the base station and cable modem. After waiting 5 minutes, restore power to the modem, then after another 5 minutes, restore power to the base station, then after another 5 minutes, start up a computer.

Value in a EIT segment(From Update Page)not getting passed to the Next Page

Hi
We have a extended CO to populate an EIT field as per the calculation in CO, on a custom button click.
Calculated value is stored/displayed in the EIT Update Page.
On clicking Apply, value is not getting passed to the next page, EIT Main Page and further to store the calcualted value in the EIT table.
Anyone have faced such problem ?
Thanks
Arun

Hi Gaurav
Facing problems with put/getSessionValue.
For the first time in a session, we do not have any issues.
For next transaction in the same session,
Variable has the same value even if we go for a next EIT transaction, and replaces this value for the field, without pressing the custom button.
Thanks
Arun

Urgent help req : work item id not getting passed in the method

Hi ,
I have created a subtype zcats of business object CATS and delegated it .
I have created a new method Approve1 ( with attributes SYNCRONUS & DIALOG ) in zcats which is similar in coding to Approve method of CATS ( DIALOG) .
I have include the method Approve1 of business object zcats in a standard task .
The problem is that when the eorkflow gets triggered , the workitem id is not getting passed in the method APProve1 of zcats.
Can someone please help me with this .
Points would surely be awarded .

BEGIN_METHOD APPROVE1 CHANGING CONTAINER.
DATA: WORKITEMID_IMP LIKE OBJECT-KEY-ITEMID.
DATA: WI_CHCKWI LIKE SWWWIHEAD-WI_ID.
DATA: WORKITEM TYPE SWC_OBJECT.
   <u> WORKITEMID_IMP = OBJECT-KEY-ITEMID</u>.
    SWC_GET_ELEMENT CONTAINER '_WORKITEM' WORKITEM.
    SWC_GET_PROPERTY WORKITEM 'WorkitemReference' WI_CHCKWI.
    IF SY-SUBRC EQ 0 AND NOT WI_CHCKWI IS INITIAL.
      WORKITEMID_IMP = WI_CHCKWI.
    ENDIF.
    CALL FUNCTION 'CATS_WF_APPROVAL'
      EXPORTING
        WORKITEMID_IMP = WORKITEMID_IMP
      TABLES
        CONT_IMP = CONTAINER.
END_METHOD.
hi ,
the above is the code in the method .
At the first step of execution underlined above , the work item id is appearing blank .
I think that the value is not passed to the container , but i am not sure og how to pass data to this conatiner

Pages 2.0 will not get past the "getting started" screen

i just updated pages to 2.0 on ipad 2 retina (ios 7.0.2) and now i cannot open pages, it will not get past the "getting started" screen
has anyone else experienced something similar?

Had the same problem. This sovled it for me:
Just let it load.
In Keynote, I didn't have so many documents, so the freeze didn't take too long- that's how I noticed it's just a freeze while loading.
For pages it took much longer. You can also turn off iCloud in settings for Pages, Keynote, etc. open it, re-enable iCloud in settings app again and quick switch back to pages (double-click home button). It will freeze up again, but after a while after all documents have been pulled from iCloud, it will be back to normal.

I'm trying to downgrade my icloud storage; however, my MAC book will not upgrade pass 10.6.8 and I don't have my iphone anymore. If there another way for me to do this?

I'm trying to downgrade my icloud storage; however, my MAC book will not upgrade pass 10.6.8 and I don't have my iphone anymore. If there another way for me to do this? I've tried everything I can find online and of course my coverage has expired and can't call the support team.

Hello Lara,
have you already called Apple and explained your current situation, because I don't see a way to downgrade your storage plan with a Mac only running Snow Leopard and without a iOS device running at least iOS 5.
Best regards.

My 4th Gen Ipod touch will not get past the apple logo

My 4th Gen Ipod touch will not get past the apple logo (unless the battery is dead, Then it tell me to charge it). Once it gave me the connect to itunes screen. I clicked restore in itunes but the ipod went back to the apple logo before the update download finished. I tried calling apple but my over the phone technical support just expired. PLEASE HELP!

This can be a corrupted software/firmware on your iPod touch. If the recovery mode you did was not forced, then try to force it into recovery mode. This is how:
1. Force it to shut down (note: this sort of shut down should not be preformed unless you are in a situation like this because it is a hardware shutdown and will not attempt to unload software, save unsaved files, safely stop system processes, etc.) to do this, hold down the power/sleep button and home button for about 7 or 10 secs. Also I might be incorrect but I heard that you can just hold down the sleep and home button until the screen goes blank and then immediately let go.
2. Have iTunes running. Hold down the home button and plug the USB cable that came with your iPod into it. Keep on holding on the home button until a picture of a USB cable going into the iTunes logo appears. You are now in a forced recovery mode. (In case your not so tech-savvy forced recovery is the same as a normal recovery mode that an iPod might do if it knows an update or restore failed.)
3. iTunes should have shown a pop-up message about it found a iPod in recovery mode. Click OK, click your iPod from the sidebar and click restore. The iPod will show the apple logo for a while and iTunes will say "preparing iPod for restore" and then "waiting for iPod" this was the longest part of updates for me.
4. iPod will reboot when restore is completed. When I update my iPod it one time showed the apple logo for one whole sync until it showed the slide to unlock screen, so do not worry. P.S if that does not work do a DFU mode restore ( I've been told DFU mode stands for device firmware update mode) I'm running out of room, so google it. Hope this helped ;)

Windows 8.1 will not get Forefront Client Updates from WSUS

Recently I noticed that my Windows 8.1 clients were not getting updates from WSUS 3.2. After some searching I found it was an issue with HTTPS and the solution was to disable HTTPS or enable TLS. So I enabled TLS on the Server 2008 R2 WSUS server
and that fixed the issue with my 8.1 clients not getting updates except for Forefront Endpoint Protection 2010. My SCCM server deploys the client fine but it is version 2.1 and normally the client and definition updates come from WSUS with the
latest client version being 4.5. However, my Windows 8.1 machines will not get the client updates even though they are automatically approved for all machines.
I am just wondering what else I can check or change to make sure my Windows 8.1 clients get the Forefront client updates as they should?? I am wondering if I manually install the 4.1 client update if it will take the client updates after that.
I only have about eight Windows 8.1 machines so if I have to do that by hand for now then I will and I think my organization will be moving to Server 2012 and SCCM 2012 this summer sometime.

I reread your post and have another suggestion. If your SCCM 2007 server is still deploying the old 2.1 FEP client version, then you should install the latest anti-malware platform update for the SCCM server so you can deploy it from there instead of WSUS:
http://support.microsoft.com/kb/2952678
http://blogs.msdn.com/b/minfangl/archive/2013/08/15/guidance-on-install-anti-malware-platform-updates-for-fep-2010-su1-and-scep-2012-sp1.aspx
Also, you may be affected by this:
"Anti-malware platform updates on MU will use special detection logic and applicability rules to make the anti-malware platform updates available only on computers with previous N-2 anti-malware platforms installed. For example, on April 8<sup>th</sup>,
anti-malware platform of version 4.5.x will be released on MU, and it will only be offered to computers where anti-malware platform version 4.3.x or 4.4.x is available. If a computer has FEP or SCEP client with version 4.1.x, it has to be upgraded to version
4.3.x first, then to the latest version (4.5.x). If a computer has FEP or SCEP client with version older than 4.1.x, because of the same N-2 rule, it has to be upgraded to 4.1.x first, then to 4.3.x, and then to the latest version (4.5.x). Required updates
will be kept on MU to ensure that this upgrade process is available for computers running older versions of the Microsoft anti-malware platform."
http://blogs.technet.com/b/configmgrteam/archive/2014/03/27/anti-malware-platform-updates-for-endpoint-protection-will-be-released-to-mu.aspx

IMac will not get past chime & white screen

iMac will not get past chime & white screen. I have tried all the start up key combinations I can think of (d or c etc) with a start up disc, but no joy. The disc drives seems ok - you can hear it working & it will eject OK.
Any other start up ideas, please?

Have you tried a safe boot? If not, hears how (it's straight from Mac Help):
To start up into Safe Mode (to "Safe Boot"), do this:
Be sure the computer is shut down.
Press the power button.
Immediately after you hear the startup tone, press and hold the Shift key.
Tip: The Shift key should be held as soon as possible after the startup tone but not before.
Release the Shift key when you see the gray Apple and progress indicator (looks like a spinning gear).
During the startup in Mac OS X 10.2 through 10.3.9, you will see "Safe Boot" on the Mac OS X startup screen.
During the startup in Mac OS X 10.4 or later, you will see "Safe Boot" on the login window, which appears even if you normally log in automatically.
To leave Safe Mode in any version of Mac OS X, restart the computer normally, without holding any keys during startup.
To learn more about Safe Boot check this page:
http://docs.info.apple.com/article.html?artnum=107392
Intel iMac (Early 2006) Mac OS X (10.4.8) 2.0 Ghz, 1 MB

HT2173 my iMac will not get past the start screen, after i restarted it after it not being able to upload my photos from my iPhone 4S to iPhoto app on my iMac bc a visa vas about 3:15 min

my iMac will not get past the start screen, after i restarted it after it not being able to upload my photos from my iPhone 4S to iPhoto app on my iMac bc a visa vas about 3:15 min. What should I do to get my imac past this?

According to your posted Profile here you are running a PPC based iMac. This Forum is only for "Intel iMac's", and so to get the expert and correct help you need you should repost your question in the "PPC iMac Forum".
Hope this helps

Will not get pass set up

Similar Messages

Maybe you are looking for