Win dvr wont install

When I go to install the Win DVR software i get an error
" Setup Failed To Run Installation "
" The Remote Procedure Failed "
I tried to download the latest software and get the same error.

Hello;
I also had trouble installing iTunes on Windows 7, but 32 bit.
It looks like maybe you are trying to install iTunes 64 bit on 32 bit machine or version of Windows, as it is looking for a valid Win32 app?
You might want to verify the version of Windows you are running, and whether your machine is correctly configured for 64 bit.
Here is an account of my trouble, and my suggestions for installing iTunes on any Windows 7 machine:
First, I found that the setup would freeze when it was almost done. The last screen, the progress bar would freeze about 3/4 of the way through.
I found that, after stopping the process in Task Manager, that iTunes was installed, and ran properly. So, it was only the install program that had frozen, after it had completely installed iTunes.
I did run the setup in compatibility mode for Vista SP2, and ticked the run as admin box.
I think that there are issues with iTunes (32 and 64 bit) on Windows 7 (32 and 64 bit) but Apple doesn't seem to want to address this. I have yet to see an acknowledgment from Apple on this problem.
What I recommend, is this:
Before attempting to install iTunes, create a system image (not just a restore point) so that you can restore your system if and when iTunes messes up your system.
Make sure you are logged into your computer as admin or a user that has admin privs.
Run the iTunes setup program with the "run this program as administrator" box ticked.
Try running with compatibility for Vista SP2.

Similar Messages

ITunes on Win 7 wont install

Hi guys.
I downloaded the latest iTunes and it wont install.
Im running Win 7 Ultimate 64bit. When i downloaded the 64bit version i got a msg saying that its not a valid win32 app????
I then downloaded it again with the same issue.
When i installed a earlier version that i used on my 32bit system it worked but i cant rip my cd's.
Ayn ideas??

Hello;
I also had trouble installing iTunes on Windows 7, but 32 bit.
It looks like maybe you are trying to install iTunes 64 bit on 32 bit machine or version of Windows, as it is looking for a valid Win32 app?
You might want to verify the version of Windows you are running, and whether your machine is correctly configured for 64 bit.
Here is an account of my trouble, and my suggestions for installing iTunes on any Windows 7 machine:
First, I found that the setup would freeze when it was almost done. The last screen, the progress bar would freeze about 3/4 of the way through.
I found that, after stopping the process in Task Manager, that iTunes was installed, and ran properly. So, it was only the install program that had frozen, after it had completely installed iTunes.
I did run the setup in compatibility mode for Vista SP2, and ticked the run as admin box.
I think that there are issues with iTunes (32 and 64 bit) on Windows 7 (32 and 64 bit) but Apple doesn't seem to want to address this. I have yet to see an acknowledgment from Apple on this problem.
What I recommend, is this:
Before attempting to install iTunes, create a system image (not just a restore point) so that you can restore your system if and when iTunes messes up your system.
Make sure you are logged into your computer as admin or a user that has admin privs.
Run the iTunes setup program with the "run this program as administrator" box ticked.
Try running with compatibility for Vista SP2.

Labview app developed in Win XP wont install properly on win 7

I developed an app which had hard coded path filenames and built the installer to install them in those specific directories. I.E. : c:\Program Files\app\myfile.txt. I ran this installer on a win 7 machine and it put the files in the directory C:\Program Files x86\app\myfile.txt. As a result, the program does not work because it is looking for the file in the original directory where it isnt.
How do I get around this problem and allow my app to be installed in either Win XP or Win 7?

That second example you linked to has nothing to do with project build or installation directories. It is an example that is related to this: Why Does My Executable Not Work When Using the Current VI's Path Constant?
id wrote:
Since this new Get System Dir.VI has many more selctions, have these features been incorporated into the project build tool?
What exactly are you asking here? The building of the installer uses symbolic names for where the files should be placed (ie., "Program Files" to indicate whatever folder is specified as the installation directory). Thus, a user can select to install the application onto some other drive, such as "E:\YourApp", instead of "C:\Program Files" (or "C:\program Files (x86)" on a 64-bit system). There should be no reason for you to set these paths in the installer specification. This simply moves the path hard-coding from the code to the installer. How is this any better?
Your code should use the Get System Directory VI to get the paths programmatically.
You should also keep in mind that Windows 7 has further restrictions on the "C:\Program Files" and other folders (such as the root drive). This has come up before, so you can search for these posts. If you want to save something programmatically, under XP it was not an issue, but under Windows 7 it will be an issue if your target is the "C:\Program Files" directory, if that's where the application was installed. Microsoft created the "C:\Program Data" folder for post-installation, run-time saving of files by the application.

HT201413 itunes wont install, runtime error R6034 also 'apple mobile device' wont start! help!

itunes wont install, runtime error R6034 also 'apple mobile device' wont start! help!

Go to Control Panel > Add or Remove Programs (Win XP) or Programs and Features (later)
Remove all of these items in the following order:
iTunes
Apple Software Update
Apple Mobile Device Support (if this won't uninstall move on to the next item)
Bonjour
Apple Application Support
Reboot, download iTunes, then reinstall, either using an account with administrative rights, or right-clicking the downloaded installer and selecting Run as Administrator.
The uninstall and reinstall process will preserve your iTunes library and settings, but ideally you would back up the library and your other important personal documents and data on a regular basis. See this user tip for a suggested technique.
Please note:
Some users may need to follow all the steps in whichever of the following support documents applies to their system. These include some additional manual file and folder deletions not mentioned above.
HT1925: Removing and Reinstalling iTunes for Windows XP
HT1923: Removing and reinstalling iTunes for Windows Vista, Windows 7, or Windows 8
tt2

CS4 Master Collection wont install on Vista Ultimate 64-bit.

Im using my friends cs4 disc's wich he doesent use any more (switched from windows to mac) and it wont install
full quality image atached if you cant read this one.

This is a very close friend we've been working together since high school. but other than that dont you have any ideas whatsoever?
or is there any way to skip the system profile check, cause i'm prity sure my system is more than adiquate to run cs4
3.16ghz duo core, 4gb ram, 1gb ati radeon his hd4670.

I wanted to update my itunes and it didn't update and now it wont open so i had to uninstall it and it wont install now at all can you please help?

Hi
I turned on my laptop this evening to import a new cd but it asked me if i wanted to download the new version of itunes so i went ahead to update it but it failed to update then it failed to open at all, and and runtime error keeps popping up but when i uninstalled it to reinstall it it wont install now and i cant use my ipod or ipad with my laptop without itunes and i never had this problem at all. can you please help?

Hey maryncomiskey,
Thanks for the question. I understand you are experiencing issues with the latest iTunes update. The following resource may help to resolve your issue:
Issues installing iTunes or QuickTime for Windows
http://support.apple.com/kb/HT1926
Additional Information:
How to restart the Apple Mobile Device Service (AMDS) on Windows
http://support.apple.com/kb/TS1567
Thanks,
Matt M.

Hi i am trying to install itunes and it wont install due to error code 2349 how do i fix this issue

i have tryed on numerous occasions to install itunes and it sometimes installs but then i cant use it due to error code 2349, so i uninstall and try again and wont install it at all due to error code 2349 please help i really eant to use my ipod

Refer to this thread:
https://discussions.apple.com/thread/3174150?start=0&tstart=0

TS5376 iTunes wont install. It says " The program can't start because MediaAccessibility.dll is missing from your computer. Try reinstalling the program to fix this problem." I have uninstalled iTunes 5 times and reinstalled it, and nothing has worked.

iTunes wont install. It says "The program can't start because MediaAccessibility.dll is missing from your computer. Try reinstalling the program to fix this problem." I have uninstalled iTunes 5 times and reinstalled it, and nothing has worked. Help!!!!

Click here and follow the instructions. You may need to completely remove and reinstall iTunes and all related components, or run the process multiple times; this won't normally affect its library, but that should be backed up anyway.
(99683)

Hi im having huge problems trying to install flash for my mac 10.5 imac, iv gone through the internet and tried all of the solutions, everytime i try to install flash it says cant read the download file, or it just wont install, anybody plz help!

hi im having huge problems trying to install flash for my mac 10.5 imac, iv gone through the internet and tried all of the solutions, everytime i try to install flash it says cant read the download file, or it just wont install, anybody plz help!
iv unistalled flash, iv checked plug ins it just wont work,

It would have been a great help to know precisely what Mac you have, so some of the following may not apply:
You can check here: http://www.adobe.com/products/flash/about/ to see which version you should install for your Mac and OS. Note that version 10,1,102,64 is the last version available to PPC Mac users*. The latest version,10.3.183.23 or later, is for Intel Macs only running Tiger or Leopard, as Adobe no longer support the PPC platform. Version 11.4.402.265 or later is for Snow Leopard onwards.
(If you are running Mavericks: After years of fighting malware and exploits facilitated through Adobe's Flash Player, the company is taking advantage of Apple's new App Sandbox feature to restrict malicious code from running outside of Safari in OS X Mavericks.)
* Unhelpfully, if you want the last version for PPC (G4 or G5) Macs, you need to go here: http://kb2.adobe.com/cps/142/tn_14266.html and scroll down to 'Archived Versions/Older Archives'. Flash Player 10.1.102.64 is the one you download. More information here: http://kb2.adobe.com/cps/838/cpsid_83808.html
You should first uninstall any previous version of Flash Player, using the uninstaller from here (make sure you use the correct one!):
http://kb2.adobe.com/cps/909/cpsid_90906.html
and also that you follow the instructions closely, such as closing ALL applications (including Safari) first before installing. You must also carry out a permission repair after installing anything from Adobe.
After installing, reboot your Mac and relaunch Safari, then in Safari Preferences/Security enable ‘Allow Plugins’. If you are running 10.6.8 or later:
When you have installed the latest version of Flash, relaunch Safari and test.
If you're getting a "blocked plug-in" error, then in System Preferences… ▹ Flash Player ▹ Advanced
click Check Now. Quit and relaunch your browser.
You can also try these illustrated instructions from C F McBlob to perform a full "clean install", which will resolve the "Blocked Plug-in" message when trying to update via the GUI updater from Adobe.
Use the FULL installer for 12.0.0.44: Flash Player 12 (Mac OS X)
And the instructons are here: Snow Leopard Clean Install.pdf
(If you are running a PPC Mac with Flash Player 10.1.102.64 and are having problems with watching videos on FaceBook or other sites, try the following solution which fools the site into thinking that you are running the version 11.5.502.55:)
Download this http://scriptogr.am/nordkril/post/adobe-flash-11.5-for-powerpc to your desktop, unzip it, and replace the current Flash Player plug-in which is in your main/Library/Internet Plug-Ins folder, (not the user Library). Save the old one just in case this one doesn't work.

How to remove win 8 and install win 7 in bootcamp

I want to completely remove win 8 and install win 7 in bootcamp. I followed the steps in bootcamp assistant and it appears to remove the win 8 partition. However when starting a new win 7 bootcamp partition and installation setup still thinks win 8 is being used. how do I get it to recognize the win 7 now being installed from the usb drive? This is on an iMac 27 late 2012 with OS x 10.10.1

Hi Janesdf,
Welcome to Lenovo Community!
As per the query we understood that you are looking for Windows downgrade on your Ideapad N580.
Before doing any changes in the system HDD partition or with Windows OS, I suggest you to create the system recovery media and then you can downgrade the OS. But you require Windows 7 recovery media.
Hope this helps.
Best regards,
Hemanth Kumar
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
Follow @LenovoForums on Twitter!

Satellite Pro P100 (PSPA4E) - No Sound Following Win 7 Clean Install

Hello, A European friend really struggling and looking for help.
I have just clean installed Win 7 Home Premium (64 bit) on a Satellite Pro P100 (PSPA4E) which was purchased in November 2006. It was previously running XP and I never installed Vista though the laptop is badged Vista Capable) I followed the Win 7 bios/driver/software install order but I now have no sound at all. Everything that I have tried so far has failed to fix it.
The laptop has a Conexant based audio solution with harman kardon speakers. Win 7 has installed the following driver which reports the following info.
High Definition Audio Device (Microsoft Driver version 6.1.7601.17514 dated 11/19/2010) and Device status: This device cannot start. (Code 10)
Hardware IDs:
HDAUDIO\FUNC_01&VEN_14F1&DEV_5047&SUBSYS_1179FF31&REV_1000 HDAUDIO\FUNC_01&VEN_14F1&DEV_5047&SUBSYS_1179FF31
There is a second exclamation mark in Device Manager for a further unknown device / uninstalled driver (showing code 28) for a device with a Hardware ID of ACPI\SMCB000 but I do not know what this device is!
Does anyone have any suggestions on a fix for my sound issue?
Thanks!
Martyn

Any one have any thoughts on this issue?
I have failed to locate a working / compatible Windows 7 x64 driver for Conexant HD Audio!
Perhaps there isn't one?
Perhaps I need to try harder?!?
Perhaps the on board sound solution featuring Conexant HD Audio is simply ****** as on www.conexant.com they say manufacturers have TOLD them NOT to make drivers available (... to poor unfortunate users)!!!
I think that manufacturers need to step up to the plate and support / help their customers. I own 4 Satellite Pro laptops running Vista x32 and Windows 7 x64. This one cost me well over £1,200 so I don't want to hear or conclude that it is simply scrap! That would represent truly poor value for money - the kind of business case that would undermine my belief that Toshiba laptops are the best in the business.
Ditto Microsoft - the Windows 7 x64 Upgrade Advisor tool gave me the all clear to upgrade this system. All generally appears fine EXCEPT the lack of sound.
Having now been exposed to the experience of many other laptop owners set out in various forums etc, covering both Toshiba laptops and some other major brands, I have to conclude that the Windows 7 Upgrade Advisor is flawed and that a successful upgrade is somewhat hit and miss affair. Beware!
That said, still hopeful that someone out there will be able to help me fix this issue?
Regards
Martyn
P.S. I can be reached by any Toshiba or Microsoft technical support guru looking to make a difference and help me out.

ITunes will download but wont install on windows 7 64-bit computer.

I got this computer a few weeks ago and first thing i tried to install was iTunes off of the apple site and it wont install.
i can download the setup file to my computer and save to my documents but when i right click and click run as administrator, a loading sign will appear for two seconds then disappear... i need iTunes on this computer since it wouldnt install on my old laptop. i've even tried installing on safe mode and nothing. i just want iTunes on my computer.. any help?

Same issue here and unfortanetly no one yet has an answer...

I have downloaded an app on my phone. My husband tried to download the app on his hone but he used the same apple id as me and it said the app was already installed on another phone and wont install even using a new apple id on his phone.

I have downloaded an app on my phone. My husband tried to download the same app on his phone but he used the same apple id as me and it said the app was already installed on another phone and wont install even using a new apple id on his phone. HOw do we get this app onto his phone?

You got the new iphone????? I have same problem. I transferred audiobooks to device to find no audiobooks on device (despite it being in iTunes as if it was). Have you found a solution????? I even tried to change import settings on format transfer but hasn't worked.

HELP!! Itunes wont install on Windows 7. I get an error msg. there is a problem with this windows installer package. A program required to install to complete could not be run. Contact your support personnel or package vendor. WHAT NOW?

HELP!! Itunes wont install on Windows 7. I get an error msg. there is a problem with this windows installer package. A program required to install to complete could not be run. Contact your support personnel or package vendor. WHAT NOW?

Ok, Below is what worked for me somewhat.
Okay ... try downloading and saving a copy of the iTunesSetup.exe to your PC from the Apple website:
http://www.apple.com/itunes/download/
Now download a trial version of WinRAR:
http://www.rarlab.com/download.php
Open the iTunesSetup.exe with WinRAR, and try to run the standalone install of Apple Application Support from the AppleApplicationSupport.msi you find in there.
It works now BUT there are still problems. It is not allowing or recognizing my Cd/DVD player and i CANT burn. Looking still for this fix.

Trying to get Win 7 64 installed, not working

I am trying to get Win 7 64 installed. I have my dvd (downloaded a authorized version from Microsoft partners group, legal copy, we use it for other installs all the time). I imaged it to a dvd, should be all set.
Both Mac and Win side see the DVD. I go to my bootcamp utility, and go through that process. I am setting it up on my solid state drive that I just put into my CD slot. The DVD drive is now in an external housing hooked up VIA USB.
I then tell it to continue to format my new HD, and start the instal. It restarts, my DVD drive spins up and starts running. Then a gray screen comes up with the Apple in the middle. It then flashes, every now and then.
Can any of you give me some ideas? I have spent hours on this so far.
Thanks,
John

If you use Apple Disk Utility to burn the ISO, it won't work properly unless burned at reduced slowest speed 2x. Common and what I would consider "well known" but not documented, not put in the PDF guide in writing.
Sometimes it even boots and installs but bad install and fails. So in a way you were lucky it wouldn't start.

Win dvr wont install

Similar Messages

Maybe you are looking for