WIN - How to Connect to Informix Dynamic Server using Generic Connectivity

Hi All,
I have our Oracle running on Windows 2003 and our Informix 9x running on HP.
We have IBM Informix Client install in Wndows 2003 and connection ODBC setup and connected sucessfully.
The setup are as follows:
1) ODBC
System DSN name: capatibak (connected successfully)
2) C:\oracle\product\10.2.0\db_1\hs\admin
Copy the file inithsodbc.ora to initCAPATIBAK.ora and set the following
HS_FDS_CONNECT_INFO = capatibak
HS_FDS_TRACE_LEVEL = ON
3) Listener.ora setup
(SID_DESC =
(SID_NAME = capatibak)
(ORACLE_HOME = c:\oracle\product\10.2.0\db_1)
(PROGRAM = capatibak)
4) Tnsnames.ora setup
CAPATIBAK =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = TCP)(HOST = pendbdev1)(PORT = 1521))
(CONNECT_DATA =
(SID = CAPATIBAK)
(HS=OK)
5) Shutdown and restart Listener
6) Setup database link and perform connection test.
Return: ORA-12518: TNS:listener could not hand off client connection
Kindly advice if I miss any configuration. I am very new to this kind of setup.
Thanks
Steven

Problem solved by using the following documentation:
http://www.niall.litchfield.dial.pipex.com/WhitePapers/SettingUpGenericConnectivity.pdf

Similar Messages

How to connect to a FTP server using a proxy in a DMZ with XI file adapter?

Hello,
Want to connect to an ftp server using a proxy in the DMZ. I don't see any standard options in the XI file adapter to use a standard. Is there a workaround?
I already looked at https://www.sdn.sap.com/irj/sdn/wiki?path=/pages/viewpage.action?pageId=57137
But it didn't help me.
Regards,
Erik van Lisdonk

U can't use FTP over SSH i.e., SFTP. But u may use FTPS by enabling the SSL layer on J2EE of XI. See this
SFTP vs. FTPS in SAP PI
Regards,
Prateek

Unable to connect to the Exchange server using HTTP/HTTPS protocol.

hi,
i try to connect microsoft exchange server, but it give me
error
Unable to connect to the Exchange server using HTTP/HTTPS
protocol.
my code is pasted below............

<cfparam name="user1" default="uHRH">
<cfparam name="user2" default="uHRH">
<cfparam name="password" default="uHRH">
<cfparam name="exchangeServerIP" default="192.168.0.1">
<cftry>

<cfexchangeConnection
action="open"
username ="#user1#"
password="#password#"
server="#exchangeServerIP#"

connection="conn1">
<cfoutput>Connection to exchange server
"#exchangeServerIP#" established</cfoutput>

<CFExchangeConnection
action="close"
connection="conn1">
<cfoutput>Connection to exchange server
"#exchangeServerIP#" terminated</cfoutput>

<cfcatch type="any">
<cfoutput>#cfcatch.message#</cfoutput>
</cfcatch>
</cftry>
if any one know how to solve this error?

Hi,
The "<cfexchangeConnection>" tag supports both "HTTP"
and "HTTPS" connection.. So Please make sure the username has the
"Outlook Web Access".
Also try removing the 
comment which you placed inside the "<cfexchangeConnection>"
tag.

Can't connect to X11 window server using ':0.0'

I tried to deploy a sampel BIBean application (JSP+BIBean) to standalone OC4J( install on AIX).
When I launch the jsp from windows browser,I got the following error message.
And I export DISPLAY=IP address:0.0 and bounce the OC4J, the IP address is the machine which I launch the browser and JSP. The I can lanuch the BIBean sample application successfuly (I can see the crosstab, grap...).
But this means that only my machine's browser can access application, not others.. Is ther anything wrong with my configurations.. Please help!!!
500 Internal Server Error
java.lang.InternalError: Can't connect to X11 window server using ':0.0' as the value of the DISPLAY variable. at sun.awt.X11GraphicsEnvironment.initDisplay(Native Method) at sun.awt.X11GraphicsEnvironment.<clinit>(X11GraphicsEnvironment.java:77) at java.lang.Class.forName1(Native Method) at java.lang.Class.forName(Class.java:142) at java.awt.GraphicsEnvironment.getLocalGraphicsEnvironment(GraphicsEnvironment.java:72) at java.awt.Font.initializeFont(Font.java:285) at java.awt.Font.<init>(Font.java:319) at oracle.dss.dataView.managers.ViewStyle.<clinit>(ViewStyle.java:6600) at oracle.dss.thin.beans.dataView.BaseTitle.<init>(BaseTitle.java:50) at oracle.dss.thin.beans.dataView.Title.<init>(Title.java:31) at oracle.dss.thin.beans.dataView.Title.<init>(Title.java:42) at oracle.dss.thin.beans.dataView.ThinDataview.<init>(ThinDataview.java:131) at oracle.dss.thin.beans.gridView.ThinGridView.<init>(ThinGridView.java:123) at oracle.dss.thin.beans.crosstab.ThinCrosstab.<init>(ThinCrosstab.java:216) at java.lang.Class.newInstance0(Native Method) at java.lang.Class.newInstance(Class.java:262) at oracle.dss.persistence.persistencemanager.client.DefaultObjectFactory.getObjectInstance(DefaultObjectFactory.java:199) at oracle.dss.persistence.persistencemanager.client.DefaultStateHandler.recreatePersistableFromStateAgent(DefaultStateHandler.java:357) at oracle.dss.metadataManager.client.handlers.persistence.PersistenceMetadataHandler.getObjectInstance(PersistenceMetadataHandler.java:242) at oracle.dss.metadataManager.client.MetadataManager.getUserObject(MetadataManager.java:3168) at oracle.dss.metadataManager.common.MDFolder.lookup(MDFolder.java:355) at oracle.dss.metadataManager.common.MDFolder.lookup(MDFolder.java:539) at oracle.dss.addins.thin.common.BaseThinSession.loadView(BaseThinSession.java:110) at oracle.dss.addins.thin.common.BasePresentationHandler.createBIThinObject(BasePresentationHandler.java:806) at oracle.dss.addins.jspTags.PresentationTag.createThinObject(PresentationTag.java:102) at oracle.dss.addins.jspTags.BIBaseTag.getThinObject(BIBaseTag.java:72) at oracle.dss.addins.jspTags.PresentationTag.doStartTag(PresentationTag.java:162) at viewerJSP.jspService(_viewerJSP.java:84) [SRC:/viewerJSP.jsp:7] at com.orionserver[Oracle9iAS (9.0.3.0.0) Containers for J2EE].http.OrionHttpJspPage.service(OrionHttpJspPage.java:56) at oracle.jsp.runtimev2.JspPageTable.service(JspPageTable.java:317) at oracle.jsp.runtimev2.JspServlet.internalService(JspServlet.java:465) at oracle.jsp.runtimev2.JspServlet.service(JspServlet.java:379) at javax.servlet.http.HttpServlet.service(HttpServlet.java:853) at com.evermind[Oracle9iAS (9.0.3.0.0) Containers for J2EE].server.http.ServletRequestDispatcher.invoke(ServletRequestDispatcher.java(Compiled Code)) at com.evermind[Oracle9iAS (9.0.3.0.0) Containers for J2EE].server.http.ServletRequestDispatcher.forwardInternal(ServletRequestDispatcher.java(Compiled Code)) at com.evermind[Oracle9iAS (9.0.3.0.0) Containers for J2EE].server.http.HttpRequestHandler.processRequest(HttpRequestHandler.java(Compiled Code)) at com.evermind[Oracle9iAS (9.0.3.0.0) Containers for J2EE].server.http.HttpRequestHandler.run(HttpRequestHandler.java(Compiled Code)) at com.evermind[Oracle9iAS (9.0.3.0.0) Containers for J2EE].server.http.HttpRequestHandler.run(HttpRequestHandler.java:106) at EDU.oswego.cs.dl.util.concurrent.PooledExecutor$Worker.run(PooledExecutor.java:797) at java.lang.Thread.run(Thread.java:512)

Hi, Kelly
Thanks for your kind response.
The X-server should work, when I export DISPLY to a remote X-server.
How about ImageServlet.. It seems that the ImageServlet has more advantages than X-server or XVBF
I tried to configure OC4J using ImageServlet follow UIX developer's guide. But I was not able to force OC4J to use ImageSevlet. But OC4J is stll try to find X-sever..
I modified the web.xml file for the sample application I deployed.
Is this a right configuration? What is the different
<servlet>^M
<servlet-name>uix</servlet-name>^M
<servlet-class>oracle.cabo.servlet.UIXServlet</servlet-class>^M
<init-param>^M
<servlet-name>uix</servlet-name>^M
<servlet-class>oracle.cabo.image.servlet.ImageServlet</servlet-class>^M

Java.lang.InternalError: Can't connect to X11 window server using ':0.0'

Hi all,
I am getting the following error while running the JSP program.
Actually we are running our applications in REMOTE LINUX SERVER (Redhat 7.0).
Installed Softwares : jdk1.3.1_02 & Resin-2.1.0
500 Servlet Exception
java.lang.InternalError: Can't connect to X11 window server using ':0.0'
as the value of the DISPLAY variable.
     at sun.awt.X11GraphicsEnvironment.initDisplay(Native Method)
     at sun.awt.X11GraphicsEnvironment.<clinit>(X11GraphicsEnvironment.java:59)
     at java.lang.Class.forName0(Native Method)
     at java.lang.Class.forName(Class.java:120)
     at java.awt.GraphicsEnvironment.getLocalGraphicsEnvironment(GraphicsEnvironment.java:58)
     at java.awt.Font.initializeFont(Font.java:264)
     at java.awt.Font.<init>(Font.java:298)
     at CreateImage.create(CreateImage.java:22)
     at send2trinity_jsp._jspService(/sms/send2trinity.jsp:136)
     at com.caucho.jsp.JavaPage.service(JavaPage.java:74)
     at com.caucho.jsp.Page.subservice(Page.java:485)
     at com.caucho.server.http.FilterChainPage.doFilter(FilterChainPage.java:181)
     at com.caucho.server.http.Invocation.service(Invocation.java:291)
     at com.caucho.server.http.CacheInvocation.service(CacheInvocation.java:132)
     at com.caucho.server.http.RunnerRequest.handleRequest(RunnerRequest.java:341)
     at com.caucho.server.http.RunnerRequest.handleConnection(RunnerRequest.java:271)
     at com.caucho.server.TcpConnection.run(TcpConnection.java:136)
     at java.lang.Thread.run(Thread.java:484)
After getting this error i have logged in from local and set the DISPLAY varible as ':0.0'.
But there is no improvemnt and getting the error like,
java.lang.NoClassDefFoundError
     at java.lang.Class.forName0(Native Method)
     at java.lang.Class.forName(Class.java:120)
     at java.awt.GraphicsEnvironment.getLocalGraphicsEnvironment(GraphicsEnvironment.java:58)
     at java.awt.Font.initializeFont(Font.java:264)
     at java.awt.Font.<init>(Font.java:298)
     at CreateImage.create(CreateImage.java:22)
     at send2trinity_jsp._jspService(/sms/send2trinity.jsp:136)
     at com.caucho.jsp.JavaPage.service(JavaPage.java:74)
     at com.caucho.jsp.Page.subservice(Page.java:485)
     at com.caucho.server.http.FilterChainPage.doFilter(FilterChainPage.java:181)
     at com.caucho.server.http.Invocation.service(Invocation.java:291)
     at com.caucho.server.http.CacheInvocation.service(CacheInvocation.java:132)
     at com.caucho.server.http.RunnerRequest.handleRequest(RunnerRequest.java:341)
     at com.caucho.server.http.RunnerRequest.handleConnection(RunnerRequest.java:271)
     at com.caucho.server.TcpConnection.run(TcpConnection.java:136)
     at java.lang.Thread.run(Thread.java:484)
How should i solve this problem? Have anybody faced the same problem ?
Please help.
Thanks in advance.
Bye.

Hi all,
Thanks a lot for ur reply. It worked me atlast.I have installed JDK1.4 and try to run my program.But it was creating some junk value instaed of creating picture. Actullay my programme needs some third party fonts , it was not loading after i have upgraded. But what i did is , copied the fonts file in to <Java_home>/jre/lib/fonts/ directory. Now it's working fine.
I have done another thing .I am using resin-2.1.0 to serve my JSp pages . So i have added $JAVA_ARGS="-Djava.awt.headless=true"; in wrapper.pl . If u will not add this line then iot will not work for you.
Thank u once again.
Bye.

Error: Can't connect to X11 window server using '172.16.1.254:0.0'

Dear all,
i am installing sap4.7 in hp-ux, after installing CI, i start DI, in 17 th step it asking to install oracle by executing RUNINSTALLER.....just i open new termenal (xshell) with orasid user i executed RUNINSTALLER but after some time it will show like this---- 172.16.1.254 is my local machine 80.0.0.151 is server
/oracle/stage/920_64/Disk1/SAP/SVRCUSTOM.RSP --> /tmp/.orainst_rsp.8848: Done
Initializing Java Virtual Machine from ../../stage/Components/oracle.swd.jre/1.3.1.0.0a/1/DataFiles/Expanded/bin/java. Please wait...
$ Exception in thread "main" java.lang.InternalError: Can't connect to X11 window server using '172.16.1.254:0.0' as the value of the DISPLAY variable.
     at sun.awt.X11GraphicsEnvironment.initDisplay(Native Method)
     at sun.awt.X11GraphicsEnvironment.<clinit>(X11GraphicsEnvironment.java:58)
     at java.lang.Class.forName0(Native Method)
     at java.lang.Class.forName(Unknown Source)
     at java.awt.GraphicsEnvironment.getLocalGraphicsEnvironment(GraphicsEnvironment.java:53)
     at java.awt.Window.<init>(Window.java:183)
     at java.awt.Frame.<init>(Frame.java:310)
     at java.awt.Frame.<init>(Frame.java:289)
     at oracle.ewt.popup.PopupFrame.<init>(Unknown Source)
     at oracle.ewt.lwAWT.BufferedFrame.<init>(Unknown Source)
     at oracle.sysman.oii.oiif.oiifm.OiifmMainFrame.<init>(OiifmMainFrame.java:296)
     at oracle.sysman.oii.oiic.OiicInstaller.<init>(OiicInstaller.java:231)
     at oracle.sysman.oii.oiic.OiicInstaller.main(OiicInstaller.java:599)
How to resolve this issue, what is the problem.
Regards,
satish-k

If you logon to the console with a user, only that user is permitted to "send" the display to the screen. If you do an "su - ora<sid>" that user must be enable to do so too.
- logon as root
- open a terminal windows (a new one)
- execute "xhost +"
- use another terminal window
- execute "su - ora<sid>"
- execute "setenv DISPLAY <ip>:<port>"
- then execute ./RUNINSTALLER in the SAP subdirectory of Disk1 (NOT runInstaller)
Markus

Can't connect to X11 window server using '127.0.0.1:0.0'

Oracle 9i R2 on Redhat Fedora Core 2
In the terminal on Xwindow enviroment
# xhost +
# su - oracle
$ export DISPLAY=127.0.0.1:0.0
$./runInstaller
It display error messege below
Exception in thread "main" java.lang.InternalError: Can't connect to X11 window server using '127.0.0.1:0.0' as the value of the DISPLAY variable.
Why can't connect to X11 window server? Can you tell me how to solve that problem? Thanks

hello
I am trying to install Oracle 10g in Sun Solaris 10 all the while I ahve the following error. Please help to install oracle in sun solaris environment.
I have tried all the step of installation
Starting Oracle Universal Installer...
Checking installer requirements...
Checking operating system version: must be 5.6, 5.7, 5.8 or 5.9. Actual 5.10 Failed <<<<
Ignoring required pre-requisite failures. Continuing...Preparing to launch Oracle Universal Installer from /tmp/OraInstall2005-08-07_10-51-43AM. Please wait ...$ Oracle Universal Installer, Version 10.1.0.3.0 Production
Copyright (C) 1999, 2004, Oracle. All rights reserved.
Xlib: connection to ":0.0" refused by server
Xlib: No protocol specified
Can't connect to X11 window server using ':0' as the value of the DISPLAY variable.
:0
:0
Unable to start an interactive install session because of the following error:Can't connect to X11 window server using ':0' as the value of the DISPLAY variable. The DISPLAY environment variable should be set to <hostname or IP address>:<screen>, where the <screen> is usually '0.0'.
Depending on the Unix Shell, you can use one of the following commands as examples to set the DISPLAY environment variable:
- For csh: % setenv DISPLAY 192.168.1.128:0.0
- For sh, ksh and bash: $ DISPLAY=192.168.1.128:0.0; export DISPLAY
Use the following command to see what shell is being used:
echo $SHELL
Use the following command to view the current DISPLAY environment variable setting:
echo $DISPLAY
- Make sure that client users are authorized to connect to the X Server.
To enable client users to access the X Server, open an xterm, dtterm or xconsole as the user that started the session and type the following command:
% xhost +
To test that the DISPLAY environment variable is set correctly, run a X11 basedprogram that comes with the native operating system such as 'xclock':
% <full path to xclock... see below>
If you are not able to run xclock successfully, please refer to your PC-X Server or OS vendor for further assistance.
Typical path for 'xclock': ''

Installation error : Can't connect to X11 window server using ':0.0

Xlib: connection to ":0.0" refused by server
Xlib: No protocol specified
WHILE INSTALLING ORACLE10g ON FC1 GETING THIS ERROR
Can't connect to X11 window server using ':0.0' as the value of the DISPLAY variable.
:0.0
:0.0
Unable to start an interactive install session because of the following error:Can't connect to X11 window server using ':0.0' as the value of the DISPLAY variable. The DISPLAY environment variable should be set to <hostname or IP address>:<screen>, where the <screen> is usually '0.0'.
Depending on the Unix Shell, you can use one of the following commands as examples to set the DISPLAY environment variable:
- For csh: % setenv DISPLAY 192.168.1.128:0.0
- For sh, ksh and bash: $ DISPLAY=192.168.1.128:0.0; export DISPLAY
HOW SHOULD I MAKE THE REQUIRED CHANGES

Check this thread:
Re: Can't connect to X11 window server using 'localhost:0.0'

I keep getting notified that there is an important update to Firefox that I need to install but when I click on the icon all that happens is a message that I am connecting to the update server but a connection never happens

I keep getting a message stating that it is critical that I update my Firefox. I click on the update icon and a software update box shows up and tells me I am connecting to the update server but the connection never happens. I have left it running for hours but no connection ever occurs. Should I ignore this or do I need to go to your website and download from there? I don't want to lose my current settings.

In the Task Manager, make sure to check both the Applications tab and the Processes tab. On the Processes tab, Firefox may have two different components running: firefox.exe and plugin-container.exe. Well, in 3.5.11, it would be only the first one.

How to upload a file into server using j2ee jsp and servlet with bean?

How to upload a file into server using j2ee jsp and servlet with bean? Please give me the reference or url about how to do that. If related to struts is more suitable.
Anyone help me please!

u don't need j2ee and struts to do file uploading. An example is as such
in JSP. u use the <input> file tag like
<input type="file"....>You need a bean to capture the file contents like
class FileUploadObj {
    private FormFile srcFile;
    private byte[] fileContent;
    // all the getter and setter methods
}Then in the servlet, you process the file for uploading
    * The following loads the uploaded binary data into a byte Array.
    FileUploadObj form = new FileUploadObj();
    byte[] byteArr = null;
    if (form.signFile != null) {
        int filesize = form.srcFile.getFileSize();
        byteArr = new byte[filesize];
        ByteArrayInputStream bytein = new ByteArrayInputStream (form.srcFile.getFileData());
        bytein.read(byteArr);
        bytein.close();
        form.setFileContent(byteArr);
    // Write file content using Writer class into the destination file in the server.
    ...

Connection to Oracle BI server using BRIO

Hi,
I read in the administrator manual that it's possible to connect to Oracle BI Server with third-party tools over ODBC. The instructions say to configure a DSN on the remote machine using the Oracle BI Server driver. Does this mean that I need to install this driver or perhaps a client this driver is packaged with in order to complete this connection?
Is there some other way to connect to Oracle BI server using Brio?
Any help appreciated.
Thank you!
Some background:
We have Oracle BIEE 101320 installed with connections established to our warehouse. We have Oracle Answers (Siebel Analytics) configured and have dashboards running off the BI server.
There are a lot of folks here who use Brio. We'd like to get them to connect to the Oracle BI server rather than to the data warehouse.
--Josh
Message was edited by:
user598511

Hi
We are a Hyperion partner and have just started looking at Oracle BI Enterprise Edition. When I installed it it automatically creates an ODBC DSN on the server called AnalyticsWeb. I am working directly on the server and I can then connect using Hyperion Interactive Reporting Studio using an oce which points to the DSN. So Brio Explorer/Designer would be the same. Working on a separate client machine I guess you would need a DSN on that machine. Not sure you would do this but if you do a custom install on the client of the client tools, you should see Oracle BI Server as a data source.
BUT...
I imported the Hyperion Sample database into the Oracle metadata repository using the Admin tool, and then connect to it using Hyperion IR studio. While I can see the tables in the catalog, when I drag them into the Datamodel, they just disappear. I would be interested to see what you get.
Cheers
Bob Pentney
Indigo NZ

How to Starting and Stopping OC4J Server using Ant

How to Starting and Stopping OC4J Server using Ant
In the ant task definitions for ant-oracle-classes.jar (see antlib.xml) there are two tasks called
     name="restartServer" classname="oracle.ant.taskdefs.deploy.JSR88StartServer"
     name="shutdownServer" classname="oracle.ant.taskdefs.deploy.JSR88ShutdownServer"
I thought that these would shutdown and start the OC4J server. I guessed the parameters as – (Does anyone know where 50 ant targets are documented?)
<oracle:restartServer
userid="${oc4j.admin.user}"
     password="${oc4j.admin.password}"
     deployeruri="${deployer.uri}"
/>
<oracle:shutdownServer
     userid="${oc4j.admin.user}"
     password="${oc4j.admin.password}"
     deployeruri="${deployer.uri}"
/>
This, however does not start and stop the SOA suite. To do that I've hacked this solution together -
<path id="oc4j.console">
     <pathelement location="${oracle.home}/config"/>
     <pathelement location="${oracle.home}/jlib/startupconsole.jar"/>
     <pathelement location="${oracle.home}/opmn/lib/optic.jar"/>
     <pathelement location="${oracle.home}/lib/xmlparserv2.jar"/>
</path>
<target name="stop" description="stop oc4j server" depends="init">
     <java classname="oracle.appserver.startupconsole.view.Runner">
          <classpath refid="oc4j.console"/>
          <sysproperty key="ORACLE_HOME" path="${oracle.home}"/>
          <arg value="stop"/>
     </java>
</target>
<target name="start" description="restart oc4j server" depends="init">
     <java classname="oracle.appserver.startupconsole.view.Runner">
          <classpath refid="oc4j.console"/>
          <sysproperty key="ORACLE_HOME" path="${oracle.home}"/>
          <arg value="start"/>
     </java>
</target>
This sort of works – except when the SOA suite doesn't stop cleanly – and needs user interaction to press a Close button. This isn't very useful when doing a continous integration build and deploy.
So, does anyone have any suggestions or alternative methods to do this?
- frank

Actually if the server throws exceptions when it stops (which it always has since we applied patch 10.1.3.3) this technique will pause until a user responds to pop-up ... So a better way (I think) is -
<target name="start" description="start oc4j server" depends="init">
<java classname="oracle.appserver.startupconsole.view.Runner">
<classpath refid="oc4j.console"/>
<sysproperty key="ORACLE_HOME" path="${oracle.home}"/>
<arg value="start"/>
</java>
</target>
<target name="stop" description="stop oc4j server" depends="init">
<echo message="We expect OC4J *NOT* to stop cleanly, so we will timeout after 3 minutes ..."/>
<java classname="oracle.appserver.startupconsole.view.Runner" fork="true" timeout="180000">
<classpath refid="oc4j.console"/>
<sysproperty key="ORACLE_HOME" path="${oracle.home}"/>
<arg value="stop"/>
</java>
</target>
<target name="restart" description="restart oc4j server">
<antcall target="stop"/>

<waitfor maxwait="2" maxwaitunit="minute">
<not><http url="http://${oc4j.http.hostname}:${oc4j.http.port}"/></not>
</waitfor>
<antcall target="start"/>
</target>

Not able to connect to Lotus Domino server using java/corba

Hi
I am new to Lotus Domino server and Java.
I have INstalled Lotus Domino server5 on 1 machine and was successful in installing the Lotus client on another machine.
Throught the lotus client i am able to connect to the server and send and receive the mails.
Now I want to connect to the domino server using the Lotus Domino Tolkit for Java/Corba.
In this Toolkit they have given the sample code program ..
if I run the code I am getting the error
java.io.FileNotFoundException: http://<IPADDRESS>/diiop_ior.txtjava.io.FileNotFoundException: http://<IPADDRESS>/diiop_ior.txt
at sun.net.www.protocol.http.HttpURLConnection.getInputStream(HttpURLCon
nection.java:691)
at java.net.URL.openStream(URL.java:942)
at lotus.domino.NotesFactory.getIOR(NotesFactory.java:314)
at lotus.domino.NotesFactory.createSession(NotesFactory.java:66)
at IntroCorbaApp.run(IntroCorbaApp.java:65)
at java.lang.Thread.run(Thread.java:539)
lotus.domino.NotesException: Could not get IOR from HTTP Server
lotus.domino.NotesException
at lotus.domino.NotesFactory.getIOR(NotesFactory.java:344)
at lotus.domino.NotesFactory.createSession(NotesFactory.java:66)
at IntroCorbaApp.run(IntroCorbaApp.java:65)
at java.lang.Thread.run(Thread.java:539)
I also tried to find this file in the Domino server directory.
The file exists in drive:\LotusServer\Domino\Data\Domino\HTML directory..
I am not getting what exactly is the Problem
Plz any one help me in this regard..
thanks in advance

You should be able to access the diiop_ior.txt file from browser without authentication,only then it will work. This file should not
be protected.

[Servlet Error]-[Can't connect to X11 window server using ':0.0&#39

i m using repot engin to disply report its running in windows well in my local machine but whn i deployeed it to test server (AIX) it gave me this error server is websphere
E SRVE0026E: [Servlet Error]-[Can't connect to X11 window server using ':0.0' as the value of the DISPLAY variable.]: java.lang.InternalError: Can't connect to X11 window server using ':0.0' as the value of the DISPLAY variable.
     at sun.awt.X11GraphicsEnvironment.initDisplay(Native Method)
     at sun.awt.X11GraphicsEnvironment.<clinit>(X11GraphicsEnvironment.java:175)
     at java.lang.Class.forName1(Native Method)
     at java.lang.Class.forName(Class.java(Compiled Code))
     at java.awt.GraphicsEnvironment.getLocalGraphicsEnvironment(GraphicsEnvironment.java:91)
     at java.awt.Font.initializeFont(Font.java:333)
     at java.awt.Font.<init>(Font.java:368)
     at com.actuate.ereport.engine.templateio.TmplReader.getFont(Unknown Source)
     at com.actuate.ereport.engine.templateio.TmplReader.getFont(Unknown Source)
     at com.actuate.ereport.engine.templateio.XMLTmplReader.handleFont(Unknown Source)
     at com.actuate.ereport.engine.templateio.XMLTmplReader.closeObjects(Unknown Source)
     at com.actuate.ereport.engine.templateio.XMLTmplReader.endElement(Unknown Source)
     at com.actuate.ereport.engine.templateio.XMLTmplReader.startParsing(Unknown Source)
     at com.actuate.ereport.engine.templateio.XMLTmplReader.readTemplate(Unknown Source)
     at com.actuate.ereport.engine.templateio.TmplReader.ReadTemplateFromBytes(Unknown Source)
     at com.actuate.ereport.engine.templateio.TmplReader.readTemplate(Unknown Source)
     at com.actuate.ereport.engine.ACJEngine.readTemplate(Unknown Source)
     at com.actuate.ereport.engine.ACJEngine.readTemplate(Unknown Source)
     at com.actuate.ereport.eapi.factory.DesignFactoryImpl.load(Unknown Source)
     at com.actuate.ereport.eapi.factory.DesignFactoryImpl.load(Unknown Source)
     at ccrmsweb.actions.PrintRpts.execute(PrintRpts.java:129)
Please tell me wht exactly i have to do, i men exactly its very urgent

Check this thread:
Re: Can't connect to X11 window server using 'localhost:0.0'

Can't connect to X11 window server using ':0.0' as the value of the DISPLAY variable.

Hi,
I'm running WebLogic 5.1 sp10 on a Solaris box and I get the
following error:
java.rmi.RemoteException: java.lang.InternalError: Can't connect to
X11 window server using ':0.0' as the value of the DISPLAY variable.
     at sun.awt.X11GraphicsEnvironment.initDisplay(Native Method)
     at sun.awt.X11GraphicsEnvironment.(X11GraphicsEnvironment.java:59)
     at java.lang.Class.forName0(Native Method)
     at java.lang.Class.forName(Class.java:120)
     at java.awt.GraphicsEnvironment.getLocalGraphicsEnvironment(GraphicsEnvironment.java:58)
     at java.awt.Font.initializeFont(Font.java:264)
     at java.awt.Font.(Font.java:298)
     at com.hrw.xls.EmailXLSThread.getCellWidth(EmailXLSThread.java:162)
caused by the following code fragment:
Font f = new Font(fontName, fontStyle, fontHeight);
FontMetrics fm = (new Panel()).getFontMetrics(f);
Have I just forgotten to set an environment variable? I would prefer
not to install bulky pieces of software, but if that's what it takes
to get over this error, so be it.
Thanks, Dave A.

A Java AWT, X11 problem posted in the weblogic ejb newsgroup. I haven't been in here for long, but
that has to be a first.
If you have the DISPLAY env variable set to :0.0, you have to be at the console on a Solaris box
running the XServer. 'xdm' I think is the code that has to be running. Also, I think the format is
<hostname:0.0> or better <hostname:0> unless you are on a multi-headed workstation. Something like:
export DISPLAY=hostname:0
where hostname is the name of the host running an XServer and the .xhosts file allows access to the
XServer from the display client.
Apparently, you are not at the console?
Anyway, I don't think there is a newsgroup here that I could even recommend to cross-post this to as
it is not a WebLogic question. I think I would try the Discussion Forums at http://java.sun.com.
Bill
"D. Alvarado" wrote:
Hi,
I'm running WebLogic 5.1 sp10 on a Solaris box and I get the
following error:
java.rmi.RemoteException: java.lang.InternalError: Can't connect to
X11 window server using ':0.0' as the value of the DISPLAY variable.
at sun.awt.X11GraphicsEnvironment.initDisplay(Native Method)
at sun.awt.X11GraphicsEnvironment.(X11GraphicsEnvironment.java:59)
at java.lang.Class.forName0(Native Method)
at java.lang.Class.forName(Class.java:120)
at java.awt.GraphicsEnvironment.getLocalGraphicsEnvironment(GraphicsEnvironment.java:58)
at java.awt.Font.initializeFont(Font.java:264)
at java.awt.Font.(Font.java:298)
at com.hrw.xls.EmailXLSThread.getCellWidth(EmailXLSThread.java:162)
caused by the following code fragment:
Font f = new Font(fontName, fontStyle, fontHeight);
FontMetrics fm = (new Panel()).getFontMetrics(f);
Have I just forgotten to set an environment variable? I would prefer
not to install bulky pieces of software, but if that's what it takes
to get over this error, so be it.
Thanks, Dave A.

WIN - How to Connect to Informix Dynamic Server using Generic Connectivity

Similar Messages

Maybe you are looking for