Unable to connect to the Exchange server using HTTP/HTTPS protocol.
hi,
i try to connect microsoft exchange server, but it give me
error
Unable to connect to the Exchange server using HTTP/HTTPS
protocol.
my code is pasted below............
<!--- connection parameters --->
<cfparam name="user1" default="uHRH">
<cfparam name="user2" default="uHRH">
<cfparam name="password" default="uHRH">
<cfparam name="exchangeServerIP" default="192.168.0.1">
<cftry>
<!--- Open a connection to the exchange server by
specifying the required user credentials --->
<cfexchangeConnection
action="open"
username ="#user1#"
password="#password#"
server="#exchangeServerIP#"
<!--- protocol = "http"--->
connection="conn1">
<cfoutput>Connection to exchange server
"#exchangeServerIP#" established</cfoutput>
<!--- Close connection to exchange server --->
<CFExchangeConnection
action="close"
connection="conn1">
<cfoutput>Connection to exchange server
"#exchangeServerIP#" terminated</cfoutput>
<!--- Error Information --->
<cfcatch type="any">
<cfoutput>#cfcatch.message#</cfoutput>
</cfcatch>
</cftry>
if any one know how to solve this error?
Hi,
The "<cfexchangeConnection>" tag supports both "HTTP"
and "HTTPS" connection.. So Please make sure the username has the
"Outlook Web Access".
Also try removing the <!--- protocol = "http"--->
comment which you placed inside the "<cfexchangeConnection>"
tag.
Similar Messages
-
We are using the Azure server for our web services. Server is generating an error "Unable to connect to the remote server". What is this error means
Hello,
Did you means that you use the Windows Azure Virtual Machine DNS name as the server name in the Reporting Server Web Services URL?
For example:
Report server:http://uebi.cloudapp.net/reportserver
Report manager:http://uebi.cloudapp.net/reports
If you want to connect to Report Manager on the virtual machine from a remote computer, you should create a virtual machine TCP Endpoint and open the port in the virtual machine’s firewall. By default, the report server listens for HTTP requests
on port 80.
Reference:http://msdn.microsoft.com/en-us/library/jj992719.aspx#bkmk_ssrs_connect_2_remote_RM
Regards,
Fanny Liu
Fanny Liu
TechNet Community Support -
Hi all,
From time to time (at least once a day), the following message pops up on the user's screen:
"There is a problem with the proxy server's security certificate. Outlook is unable to connect to the proxy server . Error Code 80000000)."
If we click "OK" it goes away and everything continues to work although sometimes Outlook disconnects. It is quite annoying...
Any ideas?
Thank you in advanceHi,
For the security alert issue, I'd like to recommend you check the name in the alert windows, and confirm if the name is in your certificate.
Additionally, to narrow down the cause, when the Outlook client cannot connect again, I recommand you firstly check the connectivity by using Test E-mail AutoConfiguration. For more information, you can refe to the following article:
http://social.technet.microsoft.com/Forums/en-US/54bc6b17-9b60-46a4-9dad-584836d15a02/troubleshooting-and-introduction-for-exchange-20072010-autodiscover-details-about-test-email?forum=exchangesvrgeneral
Thanks,
Angela Shi
TechNet Community Support -
Outlook is unable to connect to the proxy server.(Error Code 10)
Hi,
I had problems with RPC proxy, I was trying to setup cutover migration.
So I read somewhere that i need to change the certprincipalname with Set-Outlookprovider.
But after this change my outlook was not working anymore
The settings before the change were:
Name Server CertPrincipalName TTL
EXCH
1
EXPR
1
WEB
1
So I set this back to the original (above) but this didn't helped...
Outlook 2013 and Exchange 2013
There is a problem with the proxy server's security certificate. The name on the security certificate is invalid or does not match the name of the target site mail.abc-company.com.
Outlook is unable to connect to the proxy server.(Error Code 10)Hi,
Please make sure the mail.abc-company.com is included in your Exchange certificate which has been assigned with IIS service.
If possible, please run the following command for double check:
Get-ExchangeCertificate | FL
For Autodiscover service, please run
Test E-mail AutoConfiguration to check if the connection is successful in Log tab and confirm the other services URL can use proper namespace in Results tab for request access.
If the Autodiscover service fails, please create a SRV record with mail.abc-company.com for Autodiscover service to have a try:
http://support2.microsoft.com/kb/940881/en-us
Regards,
Winnie Liang
TechNet Community Support -
Outlook is unable to connect to the proxy server. (Error code 0)
Hello,
I have just commenced a Exchange 2007 SP3 to Exchange 2013 SP1 migration following the following guide: http://blogs.technet.com/b/meamcs/archive/2013/07/25/part-1-step-by-step-exchange-2007-to-2013-migration.aspx
As per the above guide, my 2007 environment is now known as legacy.company.com and my 2013, webmail.company.com.
I'm using the same certificate on both boxes and it has the names autodiscover.company.com, webmail.company.com and legacy.company.com. All that seems to be working fine.
OWA is functioning perfectly, hitting https://webmail.company.com will pass the user off to https://legacy.company.com if the mailbox is on 2007. Alongside this, Outlook also has no issues connecting to 2007 mailboxes with the client proxy settings
being reconfigured to https://legacy.company.com automatically.
My problem comes when a mailbox is migrated to 2013. OWA functions fine and presents the mailbox but Outlook is unable to connect, presenting the error:
There is a problem with the proxy server's security certificate.
The name on the security certificate is invalid or does not match the name of the target site webmail.company.com.
Outlook is unable to connect to the proxy server. (Error Code 0)
If I modify the Outlook client's settings and disable "Only connect to proxy servers that have this principal name in their certificate: msstd:webmail.company.com", Outlook connects and functions fine.
I'm at a loss and have tried everything I can think and find on google. Any suggestions would be greatly appreciated.Hi,
Please refer to the following article :
http://support.microsoft.com/kb/923575
Cause:
This issue may occur if one or more of the following conditions are true:
The connection to the server requires a certification authority (CA).
You have not trusted the certification authority at the root.
The certificate may be invalid or revoked.
The certificate does not match the name of the site.
A third-party add-in is preventing access.
Solution:
To examine the certificate, follow these steps:
In Microsoft Internet Explorer, connect to the RPC server or to the secure server. For example, type
https://www.<var>server_name</var>.com/rpc in the Address bar of the Web browser, and then press ENTER.
Note The <var>server_name</var> placeholder references the RPC server name or the secure server name.
Double-click the padlock icon that is located in the lower-right corner of the Web browser.
Click the Details tab.
Note the information in the following fields:
Valid to
The Valid to field indicates the date until which the certificate is valid.
Subject
The data in the Subject field should match the site name.
Hope this helps!
Thanks.
Niko Cheng
TechNet Community Support -
Hi All
Exchange Server - 2013 CU2 (Windows 2012 Standard)
AD Server - 2003 R2 SP2
exchange-svr01.domain.com - internal name
mail.company.net - external name
When users opened Outlook 2010, they will encountered
"There is a problem with the proxy server's security certificate. The name on the security certificate is invalid or does not match the name of the target site exchange-svr01.domain.com.
Outlook is unable to connect to the proxy server.(Error Code 10)"
I also used the Microsoft Remote Connectivity Analyzer to test RPC/HTTP connectivity.
The RPC/HTTP test completed successfully.
Validating the certificate name.
Certificate name validation failed.
Host name company.net doesn't match any name found on the server certificate CN=AMAZONA-U59HG9G.
Testing SSL mutual authentication with the RPC proxy server.
The test passed with some warnings encountered.
The certificate common name company.net doesn't match the mutual authentication string provided mail.company.net; however, a match was found in the subject alternative name extension.
please help.Hi PS CL
[PS] C:\Windows\system32>Get-OutlookAnywhere
RunspaceId : c457e8aa-a0f3-4a0f-aa02-9eff24d02821
ServerName : exchange-svr01
SSLOffloading : True
ExternalHostname : mail.company.net
InternalHostname : exchange-svr01.domain.com
ExternalClientAuthenticationMethod : Negotiate
InternalClientAuthenticationMethod : Ntlm
IISAuthenticationMethods : {Basic, Ntlm, Negotiate}
XropUrl :
ExternalClientsRequireSsl : True
InternalClientsRequireSsl : True
MetabasePath : IIS://exchange-svr01.domain.COM/W3SVC/1/ROOT/Rpc
Path : C:\Program Files\Microsoft\Exchange Server\V15\FrontEnd\HttpProxy\rpc
ExtendedProtectionTokenChecking : None
ExtendedProtectionFlags : {}
ExtendedProtectionSPNList : {}
AdminDisplayVersion : Version 15.0 (Build 712.22)
Server : exchange-svr01
AdminDisplayName :
ExchangeVersion : 0.20 (15.0.0.0)
Name : Rpc (Default Web Site)
DistinguishedName : CN=Rpc (Default Web
Site),CN=HTTP,CN=Protocols,CN=exchange-svr01,CN=Servers,CN=Exchange
Administrative
Group (FYDIBOHF23SPDLT),CN=Administrative
Groups,CN=domain,CN=Microsoft
Exchange,CN=Services,CN=Configuration,DC=domain,DC=COM
Identity : exchange-svr01\Rpc (Default Web Site)
Guid : 33c3cb74-e490-487d-844c-4072334089a1
ObjectCategory : domain.COM/Configuration/Schema/ms-Exch-Rpc-Http-Virtual-Directory
ObjectClass : {top, msExchVirtualDirectory, msExchRpcHttpVirtualDirectory}
WhenChanged : 8/17/2013 10:14:55 AM
WhenCreated : 6/25/2013 1:47:50 PM
WhenChangedUTC : 8/17/2013 2:14:55 AM
WhenCreatedUTC : 6/25/2013 5:47:50 AM
OrganizationId :
OriginatingServer : ADserver.domain.COM
IsValid : True
ObjectState : Changed -
I have windows 7 and Itunes 10. I the the error of Unable to connect to the CDDB server when I try to get tune names. I can still connect to iTunes store and I can still summit track names to the CDDB server. I just cant recive the names from the CD's. I read this problem on the community and I've checked that the proxy server from Lan is unchecked. I use a verizon wireless card for my internet if that matters.
Perhaps try the iTunes Store loads partially or returns "Error 306" or "Error 10054" section in the Specific Conditions and Alert Messages: (Mac OS X / Windows) section of the following document:
iTunes: Advanced iTunes Store troubleshooting -
I have installed a new server for WSUS on Server 2k8, This is a stand alone server on Internet No client system is connected on this server as I have to copy these updates to my LAN which never connects to internet. (Previously I was using server 2k3. for
online & server 2008 on my LAN , now I have changed the server for Online)
Wsus has finished the synchronization & downloaded updates of around 67GB & its downloading more updates. The server shows me some updates are waiting to approved. but when I click the link for those updates I get following error message.
error code is as follows -
The WSUS administration console was unable to connect to the WSUS Server via the remote API.
Verify that the Update Services service, IIS and SQL are running on the server. If the problem persists, try restarting IIS, SQL, and the Update Services Service.
System.Net.WebException -- The operation has timed out
Source
System.Web.Services
Stack Trace:
at System.Web.Services.Protocols.WebClientProtocol.GetWebResponse(WebRequest request)
at System.Web.Services.Protocols.HttpWebClientProtocol.GetWebResponse(WebRequest request)
at Microsoft.UpdateServices.Internal.DatabaseAccess.ApiRemotingCompressionProxy.GetWebResponse(WebRequest webRequest)
at System.Web.Services.Protocols.SoapHttpClientProtocol.Invoke(String methodName, Object[] parameters)
at Microsoft.UpdateServices.Internal.ApiRemoting.ExecuteSPSearchUpdates(String updateScopeXml, String preferredCulture, Int32 publicationState)
at Microsoft.UpdateServices.Internal.DatabaseAccess.AdminDataAccessProxy.ExecuteSPSearchUpdates(String updateScopeXml, String preferredCulture, ExtendedPublicationState publicationState)
at Microsoft.UpdateServices.Internal.BaseApi.Update.SearchUpdates(UpdateScope searchScope, ExtendedPublicationState publicationState, UpdateServer updateServer)
at Microsoft.UpdateServices.Internal.BaseApi.UpdateServer.GetUpdates(UpdateScope searchScope)
at Microsoft.UpdateServices.UI.AdminApiAccess.UpdateManager.GetUpdates(ExtendedUpdateScope filter)
at Microsoft.UpdateServices.UI.AdminApiAccess.BulkUpdatePropertiesCache.GetAndCacheUpdates(ExtendedUpdateScope updateScope, ComputerTargetScope computerTargetScope)
at Microsoft.UpdateServices.UI.SnapIn.Pages.UpdatesListPage.GetListRows()
I Have tried desabling the firewall,disabling the antivirus protection. Tried by changing the default rule Please Help.Hi Sagar,
First, please check if the RAM is exhausted. When there is not enough RAM, this issue may occurs.
Please try to run iisreset on the WSUS server, then try to reconnect.
Also, please try to run the server cleanup wizard to remove the unused update.
Best Regards.
Steven Lee Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact [email protected] -
Unable to connect to the report server
I have a problem with run_report_object to call a report within a form. I am using 9ias Rel 2 and report server on the same machine. The test.rdf report can be executed using the URL in the browser.
I get the "Unable to connect to the report server" when I use the run_report_object in a form. Is it a configuration problem or is the code incorrrect?
My code is as follows:
Declare
repid report_object;
report_job_id VARCHAR2(200);
PL_ID PARAMLIST;
rep_status varchar2(100);
Begin
repid := FIND_REPORT_OBJECT('OP201P');
SET_REPORT_OBJECT_PROPERTY(repid, REPORT_EXECUTION_MODE, BATCH);
SET_REPORT_OBJECT_PROPERTY(repid, REPORT_COMM_MODE, SYNCHRONOUS);
SET_REPORT_OBJECT_PROPERTY(repid, REPORT_DESTYPE, CACHE);
SET_REPORT_OBJECT_PROPERTY(repid, REPORT_DESFORMAT,'pdf');
SET_REPORT_OBJECT_PROPERTY(repid, REPORT_SERVER,'repsrv');
PL_ID := CREATE_PARAMETER_LIST('TEMP');
ADD_PARAMETER(pl_id, 'p_ref1', TEXT_PARAMETER,:toolbar.ref1 );
ADD_PARAMETER(pl_id, 'p_ref2', TEXT_PARAMETER,:toolbar.ref2 );
ADD_PARAMETER(pl_id, 'p_sort', TEXT_PARAMETER,:toolbar.p_sort );
report_job_id := RUN_REPORT_OBJECT(repid, pl_id);
rep_status := REPORT_OBJECT_STATUS(report_job_id);
WHILE rep_status in ('RUNNING','OPENING_REPORT','ENQUEUED')LOOP
rep_status := REPORT_OBJECT_STATUS(report_job_id);
END LOOP;
IF rep_status = 'FINISHED' THEN
Web.show_document('http://portal.domain_name.com:7778/getjobid='||
substr(report_job_id,9) || '?server=repsrv', '_blank');
ELSE
message('Report failed with error message '|| rep_status);
END IF;
end;
For the show_document, I have tried both ' .. getjobid='|| substr(report_job_id,9)' and
' .. getjobid'|| substr(report_job_id,9)' .
Any help would be greatly appreciated.
Thank You.
Rgds
EdwinHi ,
Did you check if TCP/IP is enabled for the SQL Server service.
If Disable you may need to enable it.
To resolve this error, you can either modify the connection string to use the server name or you can enable TCP/IP for the service. Follow these steps to enable TCP/IP:
1) Start SQL Server Configuration Manager.
2) Expand SQL Server Network Configuration.
3) Select Protocols for MSSQLSERVER.
4) Right-click TCP/IP, and select Enable.
5) Select SQL Server Services.
6) Right-click SQL Server (MSSQLSERVER), and select Restart.
Also Check the below link.
Hi ,
Did you check if TCP/IP is enabled for the SQL Server service.
If Disable you may need to enable it.
To resolve this error, you can either modify the connection string to use the server name or you can enable TCP/IP for the service. Follow these steps to enable TCP/IP:
1) Start SQL Server Configuration Manager.
2) Expand SQL Server Network Configuration.
3) Select Protocols for MSSQLSERVER.
4) Right-click TCP/IP, and select Enable.
5) Select SQL Server Services.
6) Right-click SQL Server (MSSQLSERVER), and select Restart.
Also Check the below link if doesn't work from above.
http://msdn.microsoft.com/en-us/library/ms365170.aspx
Regards, PS -
Unable to connect to the Essbase server from Admin console
Hi,
I have installed Essbase Server 9.3, Client 9.3 and Administration Server 9.3 in my laptop.
The Essbase server is working fine. I am able to see all the sample applications from Excel add in. (This mean client is also working fine).
But, the problem is when i try to connect to the Essbase server, its not allowing me by producing an error:
"Unable to connect to the Essbase server please check the user name & password"
username: admin
password; password.
i tried several times...but its not working.
Please advise me.
FYI, The admin server service is started already.Hi Subrahmanyam,
Here , there are 2 things
1. Check, your essbase server is up and running ,and your admin service is up. Now , when you open the 'essbase admin console ' , provide user name and password as
admin
password
2. After you are connected to the console i.e admin console .
You see
enterprise view -> essbase analytic server -> under this , you might see your host name ( i.e of your laptop).
This host is your essbase server , and if you want to connect to it .Provide 'username' and 'password' ,which you have give after your essbase installation
So, conclusively, here we are dealing with 2 different sets of 'username' and 'passwords'
In step 1-> to connect to console , use 'admin' 'password'
In step 2-> to connect ot essbase server, use the credentials wchih you had given after installation of essbase server
Hope this clarifies you, as this is a lil confusion to many
Sandeep Reddy Enti
HCC
http://analytiks.blogspot.com -
I originally had the issue where it would not connect at all but got that fixed.
Now I am experiencing the issue when trying update the ipad ios to version 5
The process finished backing up the ipad then it says unable to connect to the backup server try again later
Any idea what I need to do now?
thanks for any helpSee
iOS 5: Updating your device to iOS 5
http://support.apple.com/kb/HT4972
iOS: How to update your iPhone, iPad, or iPod touch
http://support.apple.com/kb/HT4623
If you are currently running an iOS lower than 5.0, connect to your computer & click on the "Update your device using iTunes".
Tip - You may need to disable your firewall and anitvirus software temporarily. Then download and install the iOS update. After you update to iOS 5.x, the next update can be installed via wifi (i.e., not connected to your computer).
Cheers, Tom -
Unable to connect to the analysis server the server name was not found
Hi,
One of the user is trying to run reports from PWA 2010 and gets the below error.
Unable to connect to the analysis server the server name was not found.Please verify the name you entered is correct and then try again.
Errors in the ole db provider.An error occurred while loading the connection dialog boxcomponent for prompting.
Please advice why?Dear Project Help,
Please help the community with more information.
Which kind of reports are you running? Excel using OLAP?
If so, check out on your Excel sheet connection information to see if it's using the SSS Authentication mode:
I'm asking this because if the failure happens with a single user, the authentication method is wrong and you should set up Secure Store Service properly.
Let me know if you need any help on this.
Cheers -
Power Query online search: Unable to connect to the remote server
This is the error I get after I click add to worksheet. I see th preview of the data. I am in an enterprise behind a proxy if that helps.
[DataSource.Error] OData: Request failed (ConnectFailure): Unable to connect to the remote server
StephenOData is a web service and so long as you can access it from your current network context, it'll work. Home, Internet Café, Hotel, Airplane -- doesn't matter. If the data source is private and is on a restricted network (like some sort of private data analysis
source internal to your company), then you will need to VPN into that network before you attempt to refresh your data.
I have noted some basic steps in my blog that might help you setup the basics and verify with a known publically available OData source.
http://bariseris.wordpress.com/2014/10/27/using-excel-power-query-to-track-your-citys-progress/ -
The client timed out waiting to connect to the Essbase Server using TCP/IP
Hi,All
When I deploy the HPCM application to essbase, i received the following message below in the log file hpm.log
2009-02-20 13:34:50,389 [Thread-115] ERROR com.hyperion.profitability.business.mdb.deployment.cubegeneration.CubeGenerator: error setting measures dimension member properties
com.hyperion.profitability.data.mdb.essbase.MDBException: Error setting member property share option to store_data for member: D0900SB
at com.hyperion.profitability.data.mdb.essbase.MDBMember.setShareOption(MDBMember.java:413)
at com.hyperion.profitability.business.mdb.deployment.cubegeneration.CubeGenerator.setMemberProperties(CubeGenerator.java:1232)
Caused by: com.essbase.api.base.EssException: (1290001): Network Error [10061]: Unable To Connect To [hypeion:32776]. The client timed out waiting to connect to the Essbase Server using TCP/IP. Check your network connections. Also please make sure that Server and Port values are correct
at com.essbase.server.framework.EssOrbPluginDirect.ex_olap(Unknown Source)
at com.essbase.server.framework.EssOlapMetaDataService.ex_olap(Unknown Source)
And the Essbase service is up.
Pls help!
Shen.If you are installing on Windows, there is a limitation in the default configuration of TCPIP. I wrote about it, and included the steps to fix it, on my blog at http://timtows-hyperion-blog.blogspot.com/2007/12/essbase-api-error-fix-geeky.html.
Note the error number you reported is slightly different than what I write about in the blog, but I believe I have seen this error fixed by the blog steps..
Tim Tow
Applied OLAP, Inc -
Unable to connect to the Linux server - getting a message - username and pa
Hello,
I am unable to connect to the Linux server - getting a message - incorrect username or password . I have used this number of times and I am sure I am using the correct username and password.However, I tried to log in this time after few months to the Enterprise linux server and got this message. I have the VMware version 2.5.0 build-122581. I am using the Enterprise Linux 2.6.9-89.0.0.0.1.Esmp OS to use the Oracle EBS R12 off it. When I click the console in the VMware it starts the Linux. While it is at the 'Network starting, stage it shows 'Determining IP information : Failed' and few lines down the line 'starting smartd': Failed as well, while others are ok. I suspect these are cause of the message 'Incorrect username or password'.
What may be the issue? How do I resolve it?
Any urgent help would be highly appreciated.
Arunasish SircarHello Hussein,
I cannot copy paste as I already mentioned. However I am just typing it from the text that I see - bottom few lines.
Root Services Enabled
Root Service Oracle Process Manager for PROD_linux adopmnctl.sh started
Web Entry Point Services Enabled
Web Entry Point Services Oracle HTTP_Server PROD_linux adalnctl.sh started
Web Entry Point Services Oracle HTTP_Server PROD_linux adalnctl.sh started
Web Entry Point Services Oracle OracleTNSListenerAPPS PROD_linux adapcctl.sh failed
Web application Services Enabled
Web application Services OACORE OC4J Instance PROD_linux adoacorectl.sh failed
Web application Services FORMS OC4J Instance PROD_linux adfomsctl.sh failed
Web application Services OAFM OC4J Instance PROD_linux adoafmctl.sh failed
Batch Processing Services Enabled
Batch Processing Services OracleConcMgrPROD_linux
adcmctl.sh started
Batch Processing services Oracle fulfillment server PROD_linux jtffmctl.sh started
Other Services Disabled
Other Services OracleFormsServer-Forms PROD_linux
adformsrvctl.sh disabled
Other Services Oracle Metrics Client PROD_linux
adfmcctl.sh disabled
Other Services Oracle Metrics Sever PROD_linux
adfmsctl.sh disabled
Other Services Oracle MWA Service PROD_linux
mwctlwrpr.sh disabled
Service Control is exiting with status 4
I hope you can let me know how to resolve it.
Thanks,
AS
Maybe you are looking for
-
Frm-47023 no such parameter named query_only exist
Hi Everyone, I am creating a simple form, I just put a textbox on the canvas throug layout editor. and run the form,it gives the error frm-47023:no such parameter QUERY_ONLY exists in form moudle1. I click the ok button of alert box , it gives - frm-
-
Hello everyone. My iPhone has two computers in (iTunes wifi sync) how can I remove one of them without using that computer? because that PC stopped working so I had to recover it. Now everything is gone on that PC. Also I bought a new computer (MacBo
-
Apple Id / Itunes Password / Bad Customer Support
Please help me if you can. My daughter last purchased on her iphone on Thursday and I got a bill for it sent to her email which is her apple id as well. When she went to log in Friday it said her password was incorrect. We have tried everything ..
-
How do I get my "save and quit" back after updating to the latest version of Firefox on a PC?
How do I get my "save and quit" back I do not like having to close all my tabs and loose all that every time I close out of firefox. When I got the latest version of firefox I lost the ability for firefox to save my tabs when I close out of it. I hav
-
How to put information in the different tabs of same excel sheet
Hi all, How to download information in the different tabs of same excel sheet. EG data.xls is the excel sheet name and sheet1 , sheet2 , sheet3 are different tabs of it. Is there any standad function module for this . If somebody is having idea abt i