Windows 2008 r2 Cluster not starting - "unable to create security manager worker queues"

Hello, following a power outage, we got a serious cluster error preventing the start of the cluster.
We are trying to interpret the only four lines the cluster.log generates :
00000330.000016cc::2014/09/26-10:44:06.348 ERR   [WTQ] bogus file creation failed, 2
00000330.000016cc::2014/09/26-10:44:06.348 ERR   [WTQ] bogus file creation failed, 2
00000330.000016cc::2014/09/26-10:44:06.348 ERR   [CS] Unable to create SecurityManager worker queues, 2
00000330.000016cc::2014/09/26-10:44:06.363 ERR   Error 6
AND if starting clussvc manually :
Got ERROR_FILE_NOT_FOUND(2)' because of 'Error while creating the Security Manag
er's Thread Pool' in
    000007fe:fd69940d( ERROR_MOD_NOT_FOUND(126) )
    00000000:001ff190( ERROR_MOD_NOT_FOUND(126) )
We suspect a DLL problem (because of mod not found), but we are unable to find the ones involved even with process monitor.
clusdb hive seems ok.
The situation is serious, can anybody help, please ?

Hi RodV,
This error usually caused by cluster service fails to open a
handle to the \NUL device, Device manager shows the device instance in error state.
Please check whether the following register value still exist, if not please backup your current registry then add the it.
HKEY_LOCAL_MACHINE\SYSTEM\CURRENTCONTROLSET\ENUM\ROOT\LEGACY_NULL\0000\CONTROL
ActiveService REG_SZ Null
I am glad to be of help to you!
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

Similar Messages

CrystalRas Not Starting "Unable to create the Corba OSCA factory and register it on the eBus" Error

Post Author: eric@labcorp
CA Forum: Deployment
The CrystalRas service on one of our two clustered servers is failing with a "Unable to create the Corba OSCA factory and register it on the eBus" error message. Has anyone seen this error before?

Post Author: Murad Akram
CA Forum: Deployment
I am running BO XI R1 on a Win2003 SP1 machine, everything was working fine until last night when I copied the "U2LJUL.DLL" file for JULIAN date conversion to the C:\Windows\System32 folder and rebooted my server. After the reboot the RAS server stopped working and every time I try starting it I get this same error message "Unable to create the Corba OSCA factory and register it on the eBus". in the event log. Apparently, it didn't like the U2LJUL.DLL file and screwed up some internal time functionality. The real issue I am facing now is that even after removing this dll and rebooting my server the problem doesn't go away.
Please advice if you have any idea as to how I can fix my issue.
FYI - This same U2LJUL.DLL file was copied on a windows 2000 server and it's working fine there.
Murad

New Windows 2008 guest will not start in OVM 3.0.3

First off - seems I can't open an SR on MetaLink as the Oracle VM product isn't listed (even in the 'All Products' list)... any thoughts on that one?
But here is the real problem I have...
We are trying to create a Win Svr 2008 guest in our OVM 3.0.3 environment.
On machine start, the job shows 'In Progress' and the server is shown as locked.
If we try to open a console window, VNC fails with 'Connection Closed'
I've tried setting "boot='d'" in the vm.cfg file however we still receive the same result.
The host is an IBM x3650 M4 currently hosting 3 other Linux guests.
The current vm.cfg contents are listed below.
And what is the usbdevice='tablet' about? That's a new one on me...
vm.cfg contents:
maxmem = 2048
uuid = '0004fb00-0006-0000-c4d3-dbe06afdbe9d'
vif = []
usbdevice = 'tablet'
OVM_description = 'My test'
guest_os_type = 'windows'
builder = 'hvm'
on_poweroff = 'destroy'
boot = 'd'
vfb = ['type=vnc,vncunused=1,vnclisten=127.0.0.1']
on_crash = 'restart'
on_reboot = 'restart'
vcpus = 2
cpu_weight = 27500
OVM_os_type = 'Microsoft Windows Server 2008'
memory = 2048
cpu_cap = 0
OVM_high_availability = False
disk = ['file:/OVS/Repositories/0004fb0000030000017f66f0f7830adb/VirtualDisks/0004fb00001200008b93d22050b6d019.img,xvda,w', 'file:/OVS/Repositories/0004fb0000030000017f66f0f7830adb/ISOs/0004fb0000150000b3fe1805e0fb692c.iso,xvdb:cdrom,r']
OVM_simple_name = 'WIN2008'
name = '0004fb0000060000c4d3dbe06afdbe9d'

Hi,
I tested the Installation of XEN HVM, PV drivers with a WindowsXP, and the installation works like a charm, and the vm.cfg contains a line looks like:
OVM_domain_type = 'xen_hvm_pv'
So verify your configuration and the vm.cfg looks like (this is for Windows XP configuration ):
vif = ['mac=00:21:f6:00:01:01,bridge=1046c7a7a5']
OVM_simple_name = 'WindowsXP'
vnclisten = '127.0.0.1'
serial = 'pty'
disk = ['phy:/dev/mapper/1scsiid0007,xvda,w', 'file:/OVS/Repositories/0004fb00000300001c27e7a320d1a2cd/ISOs/0004fb00001500007f4025585e14db27.iso,xvdb:cdrom,r']
vncunused = 1
uuid = '0004fb00-0006-0000-26ac-be0bc7773494'
on_reboot = 'restart'
boot = 'dc'
name = '0004fb000006000026acbe0bc7773494'
cpu_weight = 27500
memory = 1024
cpu_cap = 0
maxvcpus = 1
OVM_high_availability = True
vnc = 1
OVM_description = ''
on_poweroff = 'destroy'
on_crash = 'restart'
guest_os_type = 'windows'
usbdevice = 'tablet'
builder = 'hvm'
vcpus = 1
keymap = 'en-us'
OVM_os_type = 'Other Microsoft Windows'
OVM_cpu_compat_group = ''
OVM_domain_type = 'xen_hvm_pv'
I hope this can help you
Best Ragards

SFC problem - "Windows Resource Protection could not start the repair service"

We are trying to attempt to fix a Windows 2008 start up problem. We boot the machine from a Windows 2008 CD and go to the repair tool - command prompt.
When we do the command sfc /scannow, we are getting
"Windows Resource Protection could not start the repair service"
We did some researches there someone suggested the trustedinstaller is not running so we tried to do a net start trustedinstaller.
But We are getting
"The windows modulers instaler service is starting
The windows modulers instaler service is starting could not be started
A system error has occured
System error 1067 has occured
The process terminated unexpectedly. "
Anyone can give us an idea to see why we can not run the sfc the first place. Thanks

SYMPTOMS:
All attempts to run command:
sfc /SCANNOW
keep returning the following message:
"Windows Resource Protection could not start the repair service"
SOLUTION:
If you are using any kind of boot image/disk to boot up, you will have to use the "offline" switches (OFFBOOTDIR & OFFWINDIR) along with the SFC /SCANNOW command in order to start repairing your instalation properly.
please remember to tripple-check for corret partition letters, because this is a crucial parameter for SFC to start working properly.
also make sure to confirm whether so called "recovery" partion exists in your specific scenario or not. If so, in most cases this will render the "recovery" partition being the one to be set as a boot partition (OFFBOOTDIR) within sfc command, while Windows
system folder (OFFWINDIR) will actually reside on a different partition.
My scenario is described exactly above and therefore in my case boot partition letter was C: and system partition was D: ...As of that - the proper command line to run SFC successfuly was:
sfc /SCANNOW /OFFBOOTDIR=c:\ /OFFWINDIR=d:\Windows
Successful scan for integrity of all protected system files and replacement of incorrect versions with correct Microsoft versions then looks like this:
X:\sources>sfc /SCANNOW /OFFBOOTDIR=c:\ /OFFWINDIR=d:\WindowsBeginning system scan. This process will take some time.Windows Resource Protection found corrupt files and successfully repaired them. Details are included in the CBS.logwindir\Logs\CBS\CBS.log. For example C:\Windows\Logs\CBS\CBS.log
Once SFC scan completed, I have run the Startup Repair from the repair dialogue menu prior rebooting the system. Remember to click "Cancel" on the prompt for using the System restore in this step. I am assuming you have tried this already time ago and confrmed
it did not resolve the problem, but most importantly - you really would not want to overwrite the files, which you have just repaired with any possibly corrupted ones ;)
After this I've unplugged bootable USB key with the My Windows Vista Enterprise 64bit setup disk image and restarted computer. System booted up properly on first attempt. No issues have been identified as a result of my post boot checks. This completely
resolved the issue in my case. Should you have questions, please let me know.
Pavel

Just installed Firefox 3.6. Firefox will not start and Firefox safemode does not start either. Using Task manager I do not see if started either. If I create a new profile and start from that window, Firefox starts up. I see no error windows/messages. I d

Just installed Firefox 3.6. Firefox will not start and Firefox safemode does not start either. Using Task manager I do not see if started either. If I create a new profile and start from that window, Firefox starts up. I see no error windows/messages. I do have it listed in my Firewall as an exception program with Permit All. What is happening?
== This happened ==
Every time Firefox opened
== After removing Firefox and Reinstalling it. ==
== User Agent ==
Mozilla/4.0 (compatible; MSIE 7.0; Windows NT 5.1; GTB6.4; .NET CLR 1.1.4322; .NET CLR 2.0.50727; .NET CLR 3.0.04506.30; .NET CLR 3.0.04506.648; MS-RTC LM 8)

If that new profile works then you can transfer some files from the old profile to that new profile (be careful not to copy corrupted files)
See http://kb.mozillazine.org/Transferring_data_to_a_new_profile_-_Firefox
See also [[Basic Troubleshooting|#Make_a_new_profile|Basic Troubleshooting: Make a new profile]]

I have a version Adobe pro 7, my old computer hard drive failed tried to install on my Windows 8.1, will not start up error message

I have a version Adobe pro 7.1, my old computer hard drive failed, tried to install on my Windows 8.1, will not start up get error message? any solutions? It worked perfectly fine on my old computer which was windows 7.0

Hey,
I am sorry but Acrobat 7 is not at all compatible with Windows 8. For this, you will need to upgrade your Adobe Acrobat version.
For better understanding, please refer this kb file:
Compatible web browsers and PDFMaker applications
Regards,
Anubha

Windows 2008 R2 does not work on Sunfire X4170

Hi, I recently bought a used X4170 server and have a weird problem. Windows 2008 R2 does not work, but 2012 does. I tried RTM version and a version with SP1. The problem is this:
After installing, I set the password and windows just displays a blank desktop, sometimes it boots but freezes soon after - the mouse cursor moved but nothing else works.
Booting in Safe Mode works and Windows do not freeze. The Event Log contains lots and lots (about 20 per second) of these entries:
Log Name:
System
Source:
Microsoft-Windows-WHEA-Logger
Date:
6/21/2014 12:24:59 AM
Event ID:
17
Task Category: None
Level:
Warning
Keywords:
User:
LOCAL SERVICE
Computer:
WIN-SOGS2TPM334
Description:
A corrected hardware error has occurred.
Component: PCI Express Root Port
Error Source: Advanced Error Reporting (PCI Express)
Bus:Device:Function: 0x0:0x0:0x0
Vendor ID:Device ID: 0x8086:0x3406
Class Code: 0x30000
I have tried updating the driver for this device (downloaded from Intel), no difference. Is there a way to make Windows 2008 R2 work on this server?

Hello
Thank you for the update.
Please refer the below Knowledge document related to this issue:
Windows BSOD WHEA_UNCORRECTABLE_ERROR(124) & correctable WHEA events when disabling network ports on X4170M2/X4270M2 (Doc ID 1576683.1)
However above document talks about X4170M2, I would suggest you to follow and if issue persist, please open Service Request with Oracle to diagnose further.
Best Regards
Bhavyesh

Task scheduler in windows 2008 R2 cluster.

We have clustered server and there's two nodes - Active(A1)/Active(A2).
Ordinary client can connect A1, but A1 is failed then connect A2 by windows 2008 R2 cluster.
We have a task scheduler exe module created by .net framework in each node.
When A1 server is operated, we wanna just A1 job scheduler active.
And A2 server is operated, just only A2 job scheduler acitve.
Can We contoller this situation in exe module or Failover Cluster Manager?
parky

If you upgrade to Win2012 or higher you can. Here's a blog on it:
http://blogs.msdn.com/b/clustering/archive/2012/05/31/10312527.aspx
Thanks!
Elden

I can't download the Adobe Premiere Elements 13. Akamai Download pop up only the download window but downloading do not start. Alternate download Method will start but downloading will stopped always after 655 Megabytes. I have tried with different browse

I can't download the Adobe Premiere Elements 13. Akamai Download pop up only the download window but downloading do not start. Alternate download Method will start but downloading will stopped always after 655 Megabytes. I have tried with different browsers, fire wall and virus protection off and also to download the trial of Adobe Premiere Elements 13 but result is every time same.

if you follow all 7 steps you can directly download a trial here: http://prodesigntools.com/photoshop-elements-13-direct-download-links-premiere.html
and activate with your serial number.
if you have a problem starting the download, you didn't follow all 7 steps, or your browser does not accept cookies.
the most common problem is caused by failing to meticulously follow steps 1,2 and/or 3 (which adds a cookie to your system enabling you to download the correct version from adobe.com).
failure to obtain that cookie results in an error page being displayed after clicking a link on prodesigntools.com or initiates the download of an incorrect (eg, current) version.

Is there any way to enable eventlog replication between two nodes in windows 2008 failover cluster.

Is there any way to enable eventlog replication between two nodes in windows 2008 failover cluster.
Thanks Azam When you see answers please Mark as Answer if Helpful..vote as helpful.

Hi,
As far as I know there don’t have the log replica function between failover cluster node, if you want to have the Unified log management you can refer the following related
KB:
Configure Computers to Forward and Collect Events
http://technet.microsoft.com/en-us/library/cc748890.aspx
Hope this helps.
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

Oracle Fulfillment server does not start and also my concurrent manager is

The oracle Fulfillment server does not start and also my concurrent manager is down, when ever iam trying to start them i getting error.
even i restarted my laptop many times
Iam using WINXP on my laptop.
Pls help someone
hsawwan
Posts: 11,859
Registered: 03/13/06
Re: oracle Fulfillment server and concurrent manager problem
Posted: Oct 13, 2008 9:26 AM in response to: user578071 Reply
What is the error?
What does CM log file say?
Please run cmclean.sql and try to start the CM then.
Note: 134007.1 - CMCLEAN.SQL - Non Destructive Script to Clean Concurrent Manager Tables
https://metalink.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=134007.1
where should i run in apps schema or some other schema, where can i find the log
as iam using r12

Duplicate thread ..
oracle Fulfillment server and concurrent manager problem
Re: oracle Fulfillment server and concurrent manager problem

HT201412 I have forgotten my Security password, My iPad not starting, how to reset security password

I have forgotten my security code, Ipad not starting , how to reset security code

If you cannot remember the passcode, you will need to restore your device using the computer with which you last synced it. This allows you to reset your passcode and resync the data from the device (or restore from a backup).
If you restore on a different computer that was never synced with the device, you will be able to unlock the device for use and remove the passcode, but your data will not be present.
You may have to force iPad/iPod into Recovery Mode
http://support.apple.com/kb/ht4097

SQL Express 2008 R2 will not start on Windows 7 Home

Ok, This used to work, and then over night my system rebooted and now I cannot start SQL Express 2008 R2 after I have unistalled, and re-installed.   Cleared out the folders and the certificates, changed the Named Pipes configuration and all to
no avail.   Here is my log file.
-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=
2014-06-14 08:45:18.18 Server      Microsoft SQL Server 2008 R2 (SP1) - 10.50.2500.0 (X64)
   Jun 17 2011 00:54:03
   Copyright (c) Microsoft Corporation
   Express Edition (64-bit) on Windows NT 6.1 <X64> (Build 7601: Service Pack 1)
2014-06-14 08:45:18.18 Server      (c) Microsoft Corporation.
2014-06-14 08:45:18.18 Server      All rights reserved.
2014-06-14 08:45:18.18 Server      Server process ID is 8924.
2014-06-14 08:45:18.18 Server      System Manufacturer: 'SAMSUNG ELECTRONICS CO., LTD.', System Model: '700Z3A/700Z4A/700Z5A/700Z5B'.
2014-06-14 08:45:18.18 Server      Authentication mode is MIXED.
2014-06-14 08:45:18.18 Server      Logging SQL Server messages in file 'C:\Program Files\Microsoft SQL Server\MSSQL10_50.ACT7\MSSQL\Log\ERRORLOG'.
2014-06-14 08:45:18.18 Server      This instance of SQL Server last reported using a process ID of 2820 at 6/14/2014 8:32:55 AM (local) 6/14/2014 1:32:55 PM (UTC). This is an informational message only; no user action is required.
2014-06-14 08:45:18.18 Server      Registry startup parameters:
   -d C:\Program Files\Microsoft SQL Server\MSSQL10_50.ACT7\MSSQL\DATA\master.mdf
   -e C:\Program Files\Microsoft SQL Server\MSSQL10_50.ACT7\MSSQL\Log\ERRORLOG
   -l C:\Program Files\Microsoft SQL Server\MSSQL10_50.ACT7\MSSQL\DATA\mastlog.ldf
2014-06-14 08:45:18.18 Server      SQL Server is starting at normal priority base (=7). This is an informational message only. No user action is required.
2014-06-14 08:45:18.18 Server      Detected 8 CPUs. This is an informational message; no user action is required.
2014-06-14 08:45:18.21 Server      Using dynamic lock allocation. Initial allocation of 2500 Lock blocks and 5000 Lock Owner blocks per node. This is an informational message only. No user action is required.
2014-06-14 08:45:18.23 Server      Node configuration: node 0: CPU mask: 0x00000000000000ff:0 Active CPU mask: 0x00000000000000ff:0. This message provides a description of the NUMA configuration for this computer. This is an informational
message only. No user action is required.
2014-06-14 08:45:18.25 spid7s      Starting up database 'master'.
2014-06-14 08:45:18.28 spid7s      FILESTREAM: effective level = 0, configured level = 0, file system access share name = 'ACT7'.
2014-06-14 08:45:18.29 spid7s      SQL Trace ID 1 was started by login "sa".
2014-06-14 08:45:18.29 spid7s      Starting up database 'mssqlsystemresource'.
2014-06-14 08:45:18.30 spid7s      The resource database build version is 10.50.2500. This is an informational message only. No user action is required.
2014-06-14 08:45:18.32 spid7s      Server name is 'MARTINDAHL-PC\ACT7'. This is an informational message only. No user action is required.
2014-06-14 08:45:18.32 spid10s     Starting up database 'model'.
2014-06-14 08:45:18.32 spid7s      Informational: No full-text supported languages found.
2014-06-14 08:45:18.32 spid7s      Starting up database 'msdb'.
2014-06-14 08:45:18.33 Server      Error: 17190, Severity: 16, State: 1.
2014-06-14 08:45:18.33 Server      Initializing the FallBack certificate failed with error code: 1, state: 1, error number: -2146893802.
2014-06-14 08:45:18.33 Server      Unable to initialize SSL encryption because a valid certificate could not be found, and it is not possible to create a self-signed certificate.
2014-06-14 08:45:18.33 Server      Error: 17182, Severity: 16, State: 1.
2014-06-14 08:45:18.33 Server      TDSSNIClient initialization failed with error 0x80092004, status code 0x80. Reason: Unable to initialize SSL support. Cannot find object or property.
2014-06-14 08:45:18.33 Server      Error: 17182, Severity: 16, State: 1.
2014-06-14 08:45:18.33 Server      TDSSNIClient initialization failed with error 0x80092004, status code 0x1. Reason: Initialization failed with an infrastructure error. Check for previous errors. Cannot find object or property.
2014-06-14 08:45:18.33 Server      Error: 17826, Severity: 18, State: 3.
2014-06-14 08:45:18.33 Server      Could not start the network library because of an internal error in the network library. To determine the cause, review the errors immediately preceding this one in the error log.
2014-06-14 08:45:18.33 Server      Error: 17120, Severity: 16, State: 1.
2014-06-14 08:45:18.33 Server      SQL Server could not spawn FRunCM thread. Check the SQL Server error log and the Windows event logs for information about possible related problems.
-=-=-=-=-=-=-=-=-=-=
I am logged into either the Administrator Account or my Account in which I am in the Adminstrator Group or an Admin.   My OS is Windows 7 Home Premium Edition, so I cannot clear out the MSSQL groups and things I have seen online. Since this
is Express, there is limited capabilities with the config tool.
I have tried to change the log in as in the SQL Configuration tool and every item I check, Local Service, Local System, Network Service all give the same error,
"Cannot Find Object or Property. [0x80042004]
SInce I have Home Premium, MMC will not load the snap in for Local Users and groups to check out these items.
A check of the net user shows only the Administrator, Guest and my local login in Admin Account. net localgroups show these items.
*Administrators
*Distributed COM Users
*Event Log Readers
*Guests
*HomeUsers
*IIS_IUSRS
*IIS_WPG
*Performance Log Users
*Performance Monitor Users
*SQLServer2005SQLBrowserUser$MARTINDAHL-PC
*SQLServerFDHostUser$MartinDahl-PC$ACT7
*SQLServerMSSQLServerADHelperUser$MARTINDAHL-PC
*SQLServerMSSQLUser$MartinDahl-PC$ACT7
*SQLServerSQLAgentUser$MARTINDAHL-PC$ACT7
*Users
The command completed successfully.
I checked the SSL and Force Encryption is set to no and the certificates have been cleared.
I am not sure how to solve this problem.   Please help.   Thanks, in advance.

I created a new Administrator account on the machine, mdahl.   I then started the SQL Configuration Tool and changed the log on to this new account. Same problem.   Here is the SQL Log.
2014-06-14 11:24:15.83 Server      Microsoft SQL Server 2008 R2 (SP1) - 10.50.2500.0 (X64)
   Jun 17 2011 00:54:03
   Copyright (c) Microsoft Corporation
   Express Edition (64-bit) on Windows NT 6.1 <X64> (Build 7601: Service Pack 1)
2014-06-14 11:24:15.83 Server      (c) Microsoft Corporation.
2014-06-14 11:24:15.83 Server      All rights reserved.
2014-06-14 11:24:15.83 Server      Server process ID is 11448.
2014-06-14 11:24:15.83 Server      System Manufacturer: 'SAMSUNG ELECTRONICS CO., LTD.', System Model: '700Z3A/700Z4A/700Z5A/700Z5B'.
2014-06-14 11:24:15.83 Server      Authentication mode is MIXED.
2014-06-14 11:24:15.83 Server      Logging SQL Server messages in file 'C:\Program Files\Microsoft SQL Server\MSSQL10_50.ACT7\MSSQL\Log\ERRORLOG'.
2014-06-14 11:24:15.83 Server      This instance of SQL Server last reported using a process ID of 5952 at 6/14/2014 11:21:35 AM (local) 6/14/2014 4:21:35 PM (UTC). This is an informational message only; no user action is required.
2014-06-14 11:24:15.83 Server      Registry startup parameters:
   -d C:\Program Files\Microsoft SQL Server\MSSQL10_50.ACT7\MSSQL\DATA\master.mdf
   -e C:\Program Files\Microsoft SQL Server\MSSQL10_50.ACT7\MSSQL\Log\ERRORLOG
   -l C:\Program Files\Microsoft SQL Server\MSSQL10_50.ACT7\MSSQL\DATA\mastlog.ldf
2014-06-14 11:24:15.83 Server      SQL Server is starting at normal priority base (=7). This is an informational message only. No user action is required.
2014-06-14 11:24:15.83 Server      Detected 8 CPUs. This is an informational message; no user action is required.
2014-06-14 11:24:15.87 Server      Using dynamic lock allocation. Initial allocation of 2500 Lock blocks and 5000 Lock Owner blocks per node. This is an informational message only. No user action is required.
2014-06-14 11:24:15.88 Server      Node configuration: node 0: CPU mask: 0x00000000000000ff:0 Active CPU mask: 0x00000000000000ff:0. This message provides a description of the NUMA configuration for this computer. This is an informational
message only. No user action is required.
2014-06-14 11:24:15.90 spid7s      Starting up database 'master'.
2014-06-14 11:24:15.91 spid7s      1 transactions rolled forward in database 'master' (1). This is an informational message only. No user action is required.
2014-06-14 11:24:15.91 spid7s      0 transactions rolled back in database 'master' (1). This is an informational message only. No user action is required.
2014-06-14 11:24:15.91 spid7s      Recovery is writing a checkpoint in database 'master' (1). This is an informational message only. No user action is required.
2014-06-14 11:24:15.92 spid7s      FILESTREAM: effective level = 0, configured level = 0, file system access share name = 'ACT7'.
2014-06-14 11:24:15.93 spid7s      SQL Trace ID 1 was started by login "sa".
2014-06-14 11:24:15.93 spid7s      Starting up database 'mssqlsystemresource'.
2014-06-14 11:24:15.93 spid7s      The resource database build version is 10.50.2500. This is an informational message only. No user action is required.
2014-06-14 11:24:16.03 spid7s      Server name is 'MARTINDAHL-PC\ACT7'. This is an informational message only. No user action is required.
2014-06-14 11:24:16.03 spid10s     Starting up database 'model'.
2014-06-14 11:24:16.03 spid7s      Informational: No full-text supported languages found.
2014-06-14 11:24:16.03 spid7s      Starting up database 'msdb'.
2014-06-14 11:24:16.03 Server      Error: 17190, Severity: 16, State: 1.
2014-06-14 11:24:16.03 Server      Initializing the FallBack certificate failed with error code: 1, state: 1, error number: -2146893802.
2014-06-14 11:24:16.03 Server      Unable to initialize SSL encryption because a valid certificate could not be found, and it is not possible to create a self-signed certificate.
2014-06-14 11:24:16.03 Server      Error: 17182, Severity: 16, State: 1.
2014-06-14 11:24:16.03 Server      TDSSNIClient initialization failed with error 0x80092004, status code 0x80. Reason: Unable to initialize SSL support. Cannot find object or property.
2014-06-14 11:24:16.03 Server      Error: 17182, Severity: 16, State: 1.
2014-06-14 11:24:16.03 Server      TDSSNIClient initialization failed with error 0x80092004, status code 0x1. Reason: Initialization failed with an infrastructure error. Check for previous errors. Cannot find object or property.
2014-06-14 11:24:16.03 Server      Error: 17826, Severity: 18, State: 3.
2014-06-14 11:24:16.03 Server      Could not start the network library because of an internal error in the network library. To determine the cause, review the errors immediately preceding this one in the error log.
2014-06-14 11:24:16.03 Server      Error: 17120, Severity: 16, State: 1.
2014-06-14 11:24:16.03 Server      SQL Server could not spawn FRunCM thread. Check the SQL Server error log and the Windows event logs for information about possible related problems.
Also, the link you provided is to Windows Vista, not Windows 7 Home Premium. However, I did look at the registry setting they said to look at in the link.
Locate the following registry subkey:
HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows NT\CurrentVersion\ProfileList
Under the ProfileList subkey, delete the subkey that is named <var>SID</var>.bak.
Note <var>SID</var> is a placeholder for the security identifier (SID) of the user account that is experiencing the problem. The <var>SID</var>.bak subkey should contain a ProfileImagePath registry entry that points to the original profile
folder of the user account that is experiencing the problem.
Exit Registry Editor.
Looking into my registry for my ProfilesList as mentioned. I have these items.
S-1-5-19 Folder with Default (Value not set), Flags (REG_DWORD) 0x0000000, ProfileImagePath (REG_EXPANDS_SZ) C:Windows\ServiceProfiles\LocalService, State (REG_DWORD) 0x0000000
S-1-5-20 Folder with Default (Value not set), Flags (REG_DWORD) 0x0000000, ProfileImagePath (REG_EXPANDS_SZ) C:Windows\ServiceProfiles\NetworkService, State (REG_DWORD) 0x0000000
Then I have an item for each of my three accounts, Administrator, Martin Dahl, and mdahl, All admin Accounts, which has no sid.bak, but a Sid, so not sure how this link helps me either.   Still looking for assistance. Still not starting.

Unable to Install KB 3001652, 2961149. and 2796590 (Windows 2008 R2 Systems Not Connected to the Internet)

To Anyone That Can Help,
I'm on a set of WSUS enabled Windows 2008 R2 servers with no network access to the Internet and I am unable to install the following:
Update for Microsoft Visual Studio 2010 Tools for Office Runtime
KB's 300162, KB 2961149. and KB 2796590
Equally as painful, I am unable to find anything that helps.
Any ideas...???
Roderick Lyons

The above from Don Pick pointed me to the answer!!!!
1) obtained the actual update files (KB2796590,KB2961149,and KB3001652) from my Infrastructure Team WSUS Administrators (download is also available from Internet)
2)
Ran the update, which of course blew an error
3) Clicked the error log file which gave me the following:
Summary:Failed with error 0x800B010A (A certificate chain could not be built to a trusted root authority)
file signature could not be verified
4)https://support.microsoft.com/en-us/kb/2746268
5)https://gallery.technet.microsoft.com/Configuring-Trusted-Roots-281be43a#content
For all supported x64-based versions of Windows Server 2008 R2
(The file was actually already installed)
6) Executed the repair from step 4
7) All updates (KB2796590,KB2961149,and KB3001652) installed without incident!!!
Thanks All!!!
Roderick Lyons

Sapjup cannot find correct shares on Windows 2008 R2 cluster

Hello Guru's,
I have succesfully installed CRM 5 Abap+Java on Windows 2008 R2 based hardware. This is a HA setup.
I am now in the process of upgrading to CRM 7.01. Unfortunately, the java upgrade program SAPjup runs into an error (share
Host_A\sapmnt does not exist) I cannot solve up to now.
This is my setup:
I have two application servers: Host_A and Host_B. Both servers form a Microsoft Failover Cluster. The shared disk for the abap and java central services is the F:\ drive, the cluster name is Cluster_X.
The Central Instance is installed on the local disk G:\ of Host_A; The Dialog instance on local disk G:\ of Host_B.
As instructed in the manual, I have moved the SAP cluster to Host_A and started the the upgrade process on G:\ drive of the same host.
During the phase PREPARE/INIT/INPUT_SAPSERVICESID_PWD_HA, the SAPjup program is trying to map the
Host_A\sapmnt share to a drive letter ('net use' command). This step results in an error.
I can explain this error since the proper share in my opinion should be
Cluster_X\sapmnt instead of
Host_A\sapmnt.
In Windows 2003 this was not a problem, because
Cluster_X\sapmnt and
Host_A\sapmnt can both be accessed and refers to the same disk location when the cluster group is active on Host_A. However, in Windows 2008 R2 this is not the case anymore and
Host_A\sapmnt is not a valid share.
Has any one of you run into this same problem or have suggestions how to solve?
Rob Veenman
SAP Technology.

I owe you an answer for the issue we had.
I opened a message with SAP, and got acklowledge that this is indeed a bug in SAPJup. SAP is working on a solution.
The work around (which was succesful) was as follows:
1. I moved the SAP Cluster group to Host_B (the DI host).
2. I created g:\sapmnt on Host_A and copied content from the shared drive
Cluster_X\sapmnt
to this local drive.
3. I shared diretory g:\sapmnt with share name sapmnt on Host_A and gave
SAP_<SID>_GlobalAdmin Read/write access.
Now SAPJup can continue. At the next interrup, you can remove the local directory g:\sapmnt and move the cluster disk back to Host_A.
I will give an update and close this thread as soon as I get a definitive solution from SAP AG for this issue.
Rob Veenman
SAP Technical Consultant.

Windows 2008 r2 Cluster not starting - "unable to create security manager worker queues"

Similar Messages

Maybe you are looking for