Windows 7 64 bit install issue - never get install pop up

I have pop ups turned off, no firewall, no antivirus installed at the moment
I have tried to install Adobe flash and reader. I get a flash of a pop up, then the site displays a "preparing installation" bar and then nothing...
I have tried the direct install as well. I am using IE9 and I have also tried Chrome.

nblaz wrote:
I have tried the direct install as well.
You mean the offline installers?
Flash Player for ActiveX (Internet Explorer)
Flash Player Plug-in (All other browsers)
http://get.adobe.com/reader/enterprise/

Similar Messages

I have Windows XP 32 bit and can not get Adobe flash player to load!!! Do not know what version I ha

I have
Windows XP, 32 bit and can not get the flash player to load
. Do not know what version I had to start with. When I
try to load the 10.3 version it gets to 50% then tells me
to close the Internet explorer and bartshel!
If i do this then there is nothing left to load.
I tried to save it to my desktop but then itt says no active thread foun
d. How do I load it without my Internet being open and a
dobe site up and running when it tells me to close them?

Thanks the address you gave me gave me what I needed but still had alot of trouble with the game. Come to find out it was my browser IE8 that was causing all the problem. So I changed to google chrome and loaded the regular version of Flash player and have been able to get on the game. Now i have trouble with my plugins can you send me a link to find Adobe flash player plugin 9.0.124.0?
Date: Tue, 6 Sep 2011 19:39:16 -0600
From: [email protected]
To: [email protected]
Subject: I have Windows XP 32 bit and can not get Adobe flash player to load!!! Do not know what version I ha
Hi,
Could you download the appropriate version of the installer from the following page?
http://forums.adobe.com/thread/889580?tstart=0
Once downloaded, please quit all of your browsers and launch the installer. If it still fails, please restart your system and try again. Let me know how it goes.
Thanks,
Chris
>

Hard drive died. Need to reinstall on new laptop with windows 7 64 bit system, Need to get activation code for CS3 Web Premium.

Hard drive died. Cannot uninstall CS3 to remove copy registration. Need to reinstall on new laptop with windows 7 64 bit system, Need to get activation code for CS3 Web Premium.

Thank you Bob.
Just to clarify - in terms of backing up one set of these, would that just be so I had it on disk and didn't need to re-download from Adobe if the installation got corrupted somehow? Or do I need a backup for some other reason?
Thanks

TS3212 running windows 7 64 bit home premium edition, getting installer error when attempting to download itunes

I'm running windows 7 64 bit home premium edition, getting installer error whenever I attempt to download iTunes. Cannot resolve despite every attempt known to man! Help!

I'm having the same problem and this is my error message:
what do I do?

Windows 7 64 bit Install Issues

Hello every one. I am trying to dual boot Windows 7 Home Premium 64 bit on my Mac Pro. I have used the Boot Camp Assistant to partition a whole hard drive for Windows 7, but when I try and install the software the computer restarts and I get a black screen with white text saying to "Select CD-Rom Boot Type", but I can't do anything from that screen. The drive is in FAT32 format, in port 2 and has a 500 GB capacity. I'm using Boot Camp Assistant version 3.0.4. Help would be much appreciated.

You guys missed the important parts
1. FAT is what BOOTCAMP is and does
2. OP has 'unsupported' Mac Pro
3. You can't boot from Win7 64-bit without reburning DVD after modifying it as an ISO
4. To use two processors you will want Windows 7 Pro or Ultimate;
to use more than 1.9GB RAM you need 64-bit
s and I get a black screen with white text saying to "Select CD-Rom Boot Type", but I cannot
http://jowie.com/blog/post/2008/02/24/Select-CD-ROM-Boot-Type-prompt-while-tryin g-to-boot-from-Vista-x64-DVD-burnt-from-iso-file.aspx
That is common, old, well-known issue.
I agree you don't need BCA and must pull other drives.
But this has nothing to do with not having NTFS, that comes later in the game.

H67A-G43 (B3) - Windows 7 64-bit Install issues with Video Card(s)

Specs
Case - CoolerMaster CMP 350 w/500 Watt PSU
Motherboard - MSI H67A-G43 (B3)
Processor - Intel i7-2600
Memory - 16GB (4x4GB) DDR3 1333
Hard Drive - Western Digital Caviar Green 1TB SATA 2
Video - *multiple cards tested
Issue
OS Installation
Video Card - ASUS HD 7850 DirectCUII - Computer POSTs, begins to load Windows 7 setup, freezes on the Windows 7 installer background.
Video Card - GeForce 9300 GE - Computer POSTs, begins to load Windows 7 setup, freezes on the Windows 7 installer background.
Video Card - MSI N430 GT - Computer does not POST.
Video Card - Integrated - Computer boots and completes install of Windows 7 64-bit. Install all drivers, update BIOS to current version. Attempt to boot with video cards listed above with new BIOS, same issues. (First two hang on Windows logo, 3rd no POST.)
Attempted Resolutions
As stated, I have tried 3 different video cards, as well as 2 motherboards, both of them MSI H67A-G43(B3).
We have ordered 2 other new motherboards (one ASUS, one Gigabyte) because we need to get this built for the customer ASAP. However, we have previously used the H67A-G43 boards with no issues. We would like to be able to use these motherboards on future builds. What possible solutions are there for these issues?

Quote from: HU16E on 20-April-12, 03:32:27
Tried a battery removed CMOS clear and reset after the UEFI/BIOS update? Tested with another PSU? Tried with just one RAM stick in the primary dimm slot, or with just two sticks?
Results
1 Stick DDR3 - Freezes in "Starting Windows" screen when video card (HD 7850) installed. Still works correctly with Integrated.
1 Stick DDR3 + swapping out CoolerMaster 500 Watt PSU for "Power" 500 Watt PSU - Freezes in "Starting Windows" screen with video card. Using Integrated video, works correctly.
This is on an unflashed H67A-G43 (B3) new out of the box.

Windows 7 64-bit instal error on new ST9750420AS Momentus HD in HP Envy 15

windows 7 64-bit installation error on brand new ST9750420AS Momentus 3Gb/s 750-GB Hard Drive in HP Envy 15
I installed a brand new ST9750420AS Momentus 3Gb/s 750-GB Hard Drive in my HP Envy 15 laptop, and I was getting an error in the last installation step of Windows 7, 64-bit, ultimate, indicating that Windows could not support or be installed on the computer hardware. It turns out that the drivers for the new internal hard drive, need to be installed/loaded during the initial windows install.
the drivers that ended up working are available from intel at:
RST Driver Files v.10.1, 64-bit
the steps that are requires are:
1) download the f6flpy-x64.zip file above, and unzip to a usb pen-drive
2) when installing windows 7, in the configure option of the volumes, even if windows appears to recognize the drive, it is recommended to delete all existing volumes (Advanced options), and then LOAD DRIVER, and BROWSE to the usb pen-drive, while indicating to only list drivers that are compatible with the hardeware. here is quick list of similar steps with diagrams.
3) in this case the compatible driver name is "INTEL MOBILE EXPRESS CHIPSET SATA RAID CONTROLLER¨
4) continue to configure volumes, and installing windows 7,
5) everything should work fine.

Hi Srizzle, I have done some research for you and I have found a updated driver that is designed to resolve the issue of No sound from head phones or from external speakers. Please click on the link to get to the driver down load page.
http://h10025.www1.hp.com/ewfrf/wc/softwareCategory?os=4063&lc=en&cc=us&dlc=en&sw_lang=&product=3970...
If this does NOT resolve the issue, please write back and I will be happy to do more research on this issue for you.
Thanks in advance
Click the “Kudos Thumbs Up" at the bottom of this post to say “Thanks” for helping!
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
W a t e r b o y 71
I work on behalf of HP

Qosmio X300 64 bit vista ultimate upgraded to windows 7 64 bit ultimate - issues

Hi there,
Hoping you can help me, any help would be greatly appreciated. I cannot find my laptop amongst the given models - first issue.
Second issue: given gratis CD voucher for upgrade to windows 7 ultimate with purchase of laptop, whihc i have redeemed and loaded to laptop. below are my laptop specs. And below that the consequent issues awaiting resolve PLEASE HELP!!!!!
OS Name Microsoft Windows 7 Ultimate
Version 6.1.7600 Build 7600
Other OS Description Not Available
OS Manufacturer Microsoft Corporation
System Name SUZIQQOSMIO
System Manufacturer TOSHIBA
System Model Qosmio X300
System Type x64-based PC
Processor Intel(R) Core(TM)2 Extreme CPU Q9300 @ 2.53GHz, 2534 Mhz, 4 Core(s), 4 Logical Processor(s)
BIOS Version/Date TOSHIBA V1.50, 23/12/2008
SMBIOS Version 2.5
Windows Directory C:\Windows
System Directory C:\Windows\system32
Boot Device \Device\HarddiskVolume2
Locale Australia
Hardware Abstraction Layer Version = "6.1.7600.16385"
User Name SuziQQosmio\Suzanne
Time Zone Cen. Australia Standard Time
Installed Physical Memory (RAM) 4.00 GB
Total Physical Memory 3.75 GB
Available Physical Memory 2.10 GB
Total Virtual Memory 8.63 GB
Available Virtual Memory 6.48 GB
Page File Space 4.88 GB
Page File C:\pagefile.sys
Hi there,
Specs: as per Qosmio X 300. SSD 110GB, pentium core 4 extreme, 4 Gb RAM, plenty free storage on SSD (29GB), NVidia drivers with primary being GE Force 9800 M GTS, Direct X10. there is also a note down the bottom saying that if i have linked graphic cards (whihc i do i believe there are three), that i can expect better perfomrance with some software.
Ok I aplogise from the outset, i am a layman and not that techie. K. So the issue that I upgraded recently (last week) from vista ultimate 64 bit to windows 7 64 bit. ultimate. For the main, I am reasonably happy with the outcome in most areas - except gaming that is. I have increased speed and agility and the processor is now rated at 7.2. WEI. overall the laptop is rated at 5.8. however, getting back to teh reason for writing, I have nothing negative to say about windows 7 (as compared to its predecessor) apart from wishing to resolve my game crash issue. which usually occurs about 15 mins - 20 mins into a game and comes in the form of a shutdown ? BSOD from whence the laptop reboots when prompted at on/off and wants to know if to start normally or in various safe modes. I have noticed that the laptop does become very hot at the back (around the fans) prior to teh shutdown, and i am wondering if this is an overheating issue, and how to resolve if this is the case. the only other thing i have noticed that seems untoward is that i have apparently lost a wireless jump start driver from the upgrading process which i cannot find anywherre, and may be totally unrelated to this issue anyway.
All i want to do is play the games i could play on windows vista ultimate 64 bit. these include: Sims 3, sims 3 world adventures, sims 3 ambitions, highloft end stuff, and Bioshock. Oddly enough, i have played sid meyers civillisations revolutions IV (the latest one) with no crashes, and i havent tried ANNO 1404, but fear a similar fate may await this game as some of the others.
Addditional information:
everything is as i described it above, however the screen does not go blue but black,and the laptop shuts itself down, laptop acts as if hibernating mode? (these are guesses) or some mechanism geared at preventing over heating - the back becomes very hot. the machine can be rebooted from normal mode but comes up firstly with a screen suggesting that the laptop was incorrectly shutdown, and offers options as to safe mode, normal etc. i have been starting normally with no adverse effects. This is scenario one.
scenario two ends up similarly at teh reboot stage, but gets there differently. i play the game and the screen freezes, unable to move touchpad curser, unalbe to use ctrl alt del to get up task manager. end up having to crash to reboot.
I am quite frustrated and very reluctant to mess around with things that i dont understand (dont want to make the problem worse!). I am happy to attemtpt to follow your good explicit advice.
the only other negative thing i am expereinceing is screen flicker on internet. I have changed my power mode from high performance to balanced to try to nullify the overheating issue but i now am noticing this screen flicker which is irriating and appears on keystroke, or cursor movement.
Please note well: I am a layman, not a technician! Please explain in easy to (dummy) terms! Thanks!
kind regards
S
(Im Game)

Hi there,
I would recommend taking a look at the troubleshooting steps found in the article below.
Trouble installing iTunes or QuickTime for Windows
http://support.apple.com/kb/HT1926
-Griff W.

Links in Windows (7, 64-bit) doesn't open, getting error:" [link] Can't find the program", help!?

Everytime I click a link that's not in the actual browser window, could be from a word doc, pdf-file or just plain info link in windows gadgets, I get an error:
[Clicked link]
Can't find the program
I have:
Windows 7 64-bit
Firefox 4 RC 1
Firefox is standard browser and installed at default location.
please help, it's getting really annoying!!

This is what I get when opening a link from Outlook 2010.
Windows 7 64bit
Firefox 4 RC
Firefox 4 is set as the default browser
Links won't open in FF4 from any external programs (tweetdeck, outlook, word, etc.)

Hp officejet pro l7590 windows 7 32-bit install fails

I have downloaded the HP Officejet Pro Full Feature Software and Driver for windows 7 (32-bit) for my Officejet Pro L7590 connected by USB cable to my computer. I right-click on the downloaded software and select "Run as Administrator". The installation hangs at step 7 of 8 and then shows me that the L7590 printer driver failed to install. When I look in my "Printers And Devices" I see the HP L7590, but right-clicking on it only shows scanner functions (no printer options). And no option to remove printer.
I have tried uninstalling the HP Software and reinstalling the HP Officejet Pro Full Feature Software and Driver as well I have tried installing the HP Officejet Pro Basic Print and Scan Driver from HP, all with the same failed results.
The only way I am able to use the printer is to uninstall all HP software and simply plug the USB cable to my computer. Then a printer driver is loaded and I can print. The problem is that I do not get the "Solution Center" functionality which I need for scanning.
Any help is greatly appreciated!
Thanks,
Lou

Just so we get off on the right foot, I am going to have you run through the un-instillation and re-installation of the printer again, but in a thorough and managed way. I would like to ask for information's sake if the PC you are using is a HP computer or another manufacturer. This may be useful in future steps if they are necessary. We will want to remove the PnP drivers (the ones that automatically loaded) as well.
First if you use a USB cord, make sure to remove it. Do not plug it back in until the software directs you to. Then go through the Devices and Printers, Programs and Features and Device Manager folders and insure that all copies, files, and programs related to the printer are removed. Then as directed, restart the computer.
In the START menu type "%temp%" and press ENTER. Here I want you to press Ctrl+A and hit DELETE. Some of the files will not allow you to delete them, skip those files and delete the majority that allows it.
Then follow this link to download the full feature software and drivers for the printer:
http://h10025.www1.hp.com/ewfrf/wc/softwareCategory?os=4063&lc=en&cc=us&dlc=en&sw_lang=&product=3643...
Install that and let me know the result!
Have a great day!

Windows 7 64 bit installed as 32 bit?

I installed iTunes on a Windows 7 64 bit system. I used the link to the 64 bit installer. However, when iTunes installed, it put the program in the x86 directory and in the Task Manager, it is shown as running in 32 bit mode.
Also, I pinned the application to the task bar. But when I launch iTunes, it creates a second instance in the task bar for the version that is running.
Is this how it is supposed to behave or is there a way to fix this?

I also have these issues/problems. The first being that the iTunes 7 64-bit installation doesn't install a 64-bit program, and secondly that iTunes doesn't properly 'stack' a running instance of iTunes onto the pinned iTunes launcher. (when a pinned program is running, the icon is supposed to change appearance. but iTunes puts another icon beside the launcher instead.)
I was able to fix the second problem. In my setup, I have iTunes pinned to the taskbar. I opened iTunes so that the two icons appear beside each other like they're not supposed to. I right-clicked the icon that was newly opened and chose "pin this program to the taskbar" or something similar. I then right-clicked the older of the two icons and chose "unpin this program from the taskbar". I now have just the one, fully functional icon on the taskbar.

HP Pavilon G6 (Windows 8) 64-BIT Startup Issue

HP Pavilon G6 Windows 8 64-BIT
PRODUCT: C4M16EA#ABU
MODEL: g6-2241sa
When starting up my laptop I get the either the message 'Starting/Loading Windows' or 'Preparing Automatic Repair'.
It will always stay as such indefinatly.
My keyboard is also unresponsive meaning I can't access any screens that may help, although for some reason 'ctrl + alt + del' seems to work before the HP Logo loads, but just causes the laptop to reboot.
I have tried turning my laptop off, removing the power lead and battery pack, holding the power button for 15+ seconds, plugging the power lead in while leaving the battery pack out and pressing the power button to turn it on, but nothing.
Now, this problem seemed to occor after the battery pack fell out, I guess it was improperly held in with the clips.
but even before the pack fell out, the laptop began to freeze, for the first time since I bought it, unfortunaty the battery pack fell out as it was frozen, probably adding more to the laptops struggle each startup.
as I am only a teen and still in education I'm not found to be flexible meaning I don't have a income whatsoever.
So if I do have to replace my laptop or any components of such, please suggest the cheapest you possable can...
thank you.
This question was solved.
View Solution.

You have a 1 year warranty with HP. If you are still within the year I would phone HP Support for warranty service. Worldwide contact info can be accessed by clicking here>>Contact HP
******Clicking the Thumbs-Up button is a way to say -Thanks!.******
**Click Accept as Solution on a Reply that solves your issue to help others**

Xw4300 Windows 7 64-bit install

Hello everyone,
We are trying to put Win 7 64 bit version on the xw4300 workstation. Everything goes great until the installtion is finalizing and the drivers are installing, then the system halts with a parity error.
Just wondering if anyone has successfully done this install and, if so, what, if anything did you do to get this to work.
Thank you,
Keegan
This question was solved.
View Solution.

I had the same problem. I installed Windows 7 and after installation I checked the Device Manager under the control panel system. I saw that the USB hub was fine so I installed a USB WIFI adapter and was able to connect to the internet over my local network. I then went to the Control panel and activated the UPDATE for Windows 7. When connected to the UPDATE site select the custom option. It will take a while but 158 updates were found. Hardware, software and security files were selected and after several hours, all the updates were installed. I then checked the Device manager again and all hardware drivers were installed except the Realtech audio driver. It seems that Windows 7 will automatically install the drivers for Broadcom, ATI, Nvidia etc. After that I went to Realtech and installed the audio driver. All was well and everything functioned as intended.
Bill

If I download Firefox on Windows 7 64 bit, how do I get it to run in 32 bit mode?

I have noticed if I'm on a 64 bit PC ( I am remote support for a product that needs 32 bit browser/32 bit java to work correctly), and they have upgraded to Firefox 8.0 it seems to install and run natively in 64 bit mode, and will not recognize Java 6 29 32 bit plugin.

If there was not a problem, I would not have asked the question. I have encountered this on 9 different pcs this week alone, all of them Windows 7 64 bit and had to swap them to a different browser for Java 6 29 to work.

(SOLVED) Can't Connect Wiimote after Windows 7 64-bit install (T61p)

Hello. I have a T61p that originally had Vista 32-bit on it. I used to use my Wiimote as a gamepad, I'd just have to press the sync button and it would work with the computer. Since I installed Windows 7 64-bit though, it won't. I've turned the Bluetooth adapter on and off with Fn-F5 several times.
I tried BlueSoliel and it worked yesterday but not today. Also it is an evaluation copy, and I do not plan on buying the full product.
edit: okay I uninstalled BlueSoliel and installed the 64 bit Vista driver and I can connect the Wiimote to the computer, however, it won't register any buttons being pressed, and when I go the the Game Controller Test screen it is empty.
edit2: I forgot you need to use GlovePIE. Seems to be working fine now. Sorry for wasting anyone's time.

No problem, thanks for posting your fix.
Dave
T430u, x301, x200T, x61T, x61, x32, x41T, x40, U160, ThinkPad Tablet 1838-22R, Z500 touch, Yoga Tab 2 Windows 8.1, Yoga Tablet 3 Pro
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"!
If someone helped you today, pay it forward. Help Someone Else!
English Community Deutsche Community Comunidad en Español Русскоязычное Сообщество

A665-S5170 WiFi Not Working After Windows 7 32 Bit Install

I had to put a new hard drive in my A665-S5170. Since there were drivers listed for Windows 7 32 bit for this computer, I installed a copy of Windows 7 Ultimate 32 bit that I owned. After installing every driver listed, I have no wifi. Another forum I was reading suggested it was because someone with the identical problem had not installed a driver for their chipset, and there is no chipset driver listed, but there is one for the 64 bit version.
When I look at Device Manager, I see the "!" by "network controller."
Any suggestions?

Satellite A665-S5170
Downloads here.
It was apparently not intended to run 32-bit Windows on that model. But probably this driver works.
   Intel WiMax/WiFi for Windows 7 (32), 14.1.1.3.1
   wlan-intel-win7-32-141131.zip
..and there is no chipset driver listed
The chipset software is here.
   Intel Turbo Boost Technology Driver
-Jerry

Windows 7 64 bit install issue - never get install pop up

Similar Messages

Maybe you are looking for