WIndows 7 and Audigy

WIndows 7 and AudigyX I can't seem to be able to find an answer to my problem. I seem to somehow have several different settings on my computer for my Audigy 2 sound card. When I boot the computer it seems to grab whichever setting it wants. In the Control Panel>Sound it might say 4-Creative SB Audigy one day and 7-Creative SB Audigy the next. There are a handfull of other settings with different numbers. When I check the drivers sometimes it lists the 2009 driver and sometimes it lists the 2006 driver. Sometimes it even appears to be downloading a new driver from the internet.
In any event, invariably I have to reset my TONE and LEVELS settings.
Does anybody know if this is a Windows issue or a Creative issue? Is there a settings file that can be edited or deleted? Registry hack?
John
Merrillville, IN

\ Best bet for getting Audigy 2 ZS working correctly under windows 7 is this driver pack:
<a rel="nofollow" target="_blank" href="http://forums.creative.com/t5/Sound-Blaster/SB-Audigy-Series-Support-Pack-3-6--09-2009/m-p/540934"]http://forums.creative.com/t5/Sound-Blaster/SB-Audigy-Series-Support-Pack-3-6--09-2009/m-p/540934[/url]

Similar Messages

Windows 7 and Audigy 2 ZS

Hey
I want to know the latest drivers and working solutions for the Audigy 2 ZS under Windows 7. Bioshock 2 doesnt seem to work with 7.
Thanks

\ Best bet for getting Audigy 2 ZS working correctly under windows 7 is this driver pack:
<a rel="nofollow" target="_blank" href="http://forums.creative.com/t5/Sound-Blaster/SB-Audigy-Series-Support-Pack-3-6--09-2009/m-p/540934"]http://forums.creative.com/t5/Sound-Blaster/SB-Audigy-Series-Support-Pack-3-6--09-2009/m-p/540934[/url]

CREATIVE And AudigY SE MadnessS!

CREATIVE And AudigY SE MadnessS!? Hi
WHich is the best driver verson for Audigy Se to use in Xp, I have full Driver Pack that comes with my Sound Card it's old,Drivers are of 2005 and Creative released Another set of drivers SBA_PCDRV_LB__04_006,Which is 2006 driver has not Microsoft WHQL Certified, and on 2007 another one SB24_VTDRV_LB__04_0077,Which is displaying my Audigy as SB Li've! 24bit under Sound & Audio Device properties,and the last 2007 version driver has so many problems When logon on to windows the logon sound is Automatically at High VOlume,It distorts,and all version of these Drivers lacks Treble,i should Pump up the treble In EQ to full get HIgh Frequencies Otherwise it's little bit Muddy,And 2007 Version has is faily Direct Sound Tests in Creative Diagonostic Utility.... There is some problems with Daniel_k Mod pack,even the latest support pack 2.6 , Sound is muddy in Games like Metro 2033,Nfs Most Wanted. PAX drivers are in Beta stage still Hope he will Fix the problem,So i'm Using CREATIVE Defalut Drivers, When Using Default one there is no Problem in games.... So Plz help me to decide Which CREATIVE driver Version IS best.... Plz reply..

Pookie,
I don't see any pink jack on that card. Are you using the same Audigy SE card as in this link? As far as I can see from the picture, there's only 4 jack(Blue, Green, Black & Orange).
Jason

Windows 7 and counter-strike source shuttering.

I have concluded this is caused by creatives driver by disabling the card in device manager the shuttering is gone. Is there a work in progress for this or some kind of work around until it is fixed?

Re: Windows 7 and counter-strike source shuttering. Found a simple work around until someone can fix this, found this over in the sevenforums.com
Hi there, I've recently had an extremely annoying issue regarding sound, games, multiplayer, and Windows 7. When I would start up a game (such as Counter-Strike Source or Heroes of Newerth) and connect to server, my fps and ping would be nominally ok, but the game would lag. In HoN this would be displayed by the heroes moving jerkily around the map, even though my fps and ping were good. In Counter Strike, this evidenced itself by glitchy nades that don't bounce smoothly, and whenever sounds are played, the ping spikes a bit. It's kind of like playing on a 33 tic server, for those of you familiar with the game. None of these issues occurred in single player games or in the aforementioned games with a local server.
Anyway, I searched and searched here and couldn't find anything, but finally I found something in Google:
Stop and disable the "Multimedia Class Scheduler" service<
Run regedit and go to "HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Servi ces\Audiosrv"<
Double click on the entry "DependOnService" and delete the line with "MMCSS" from the text box<
Reboot and enjoy lag free games<
This fixes issues with Realtek '97 (my motherboard uses nforce 4 chipset), and I'm guessing it will also fix issues with Creative Audigy 2 ZS, which I also have installed at the moment, but haven't tested.
I diagnosed the issue by realizing that by disabling audio devices in device manager, lag would disappear in-game. So glad I found this solution after installing 6 different audio drivers and generally being very frustrated. Just thought I'd leave this here as a reference for others with a similar issue.
Original solution by Mirkon. Thanks!

Gigaworks and audigy 2 zs platinum lip sync is

Can smeone form creative please help me with this issue.
I have loads of external dvd players, a pacific, an xbox, 4 yamadas, accoustic solutions, scanvision, etc etc.
This is what is happenning, i am connecting the pacific dvd players optical out (or coaxial) It makes no difference as they both do it.
Press play to watch dvd, and start watching movie, the longer the movie plays and even in the first 5 minutes of playback the lip sync starts to go out, this is with the use installed decoder checked on soundcard and doly digital decode slected instead of default, spdif byass.
If i stop or pause the dvd and press play the lip sysnc comes back in, then it gradually goes out again.
Now it is not the dvd player. as it does this with the xbox as well, and the yamada, etc etc, this is on a clean installation of win xp pro, the only things that are in are chipset drivers, gfx card driver and the full installation of the audigy 2 zs platinum driver disc.
I connect the optical out or the coaxial ut to the optical in on aud 2 zs plat li've bay, and the same with the coaxial in on aud 2 zs plat li've bay, but only one at a time.
Can someone tell me why this is doing this, i am 98% certain i do not get this from using aux 2 in.
Also it always says unknown or invalid spdif signal in the decoder options.
Also it fails to initialize the dolby digital decoding when inserting the coaxial cable sometimes or rather 8 times out of ten, i have to either restart dvd player, or restart computer to get sound back.
I am not happy with either the s750 speakers whilst playing dvds or the audigy 2 zs card, the speakers are not very loud whilst playing most dvds and teh lip sync is not acceptable, i have used a dtt2200 and sb li've 5. witht the same dvd players and i never had this issue, granted this was on another computer, so i wil be try the s750 with the new computers onboard 7. sound chip to see if i get same issues, then i will be moving the sound card into another pci slot but i should not have to do this, as creative should have already tried this card in all available pci slots in all manufacturers motherboards to test the compatibility, if this issue remains can someone at creative tell me if they will give me a refund for the hardware of gigaworks s750 and audigy 2 zs platinum as www.dabs.co.uk will not give me a refund for these the speakers have only been in use for at most 2 weeks but are 3 weeks old and aud 2 card is about 0 weeks old but have only just been tested on my new computer as of at most 4 days as thats went i got all the other hardware to build up computer and i am most unhappy that dabs tell me they only do a refund or replacement upto 28 days, so creative it looks like the refunding of my money will fall to your company, but then after all it is your hardware, so you maybe can force dabs into giving me a refund , as after all it is your hardware and you will be able to reimburse dabs .

I tried it into all available pci slots on a fresh clean install of windows xp even the exclusi've pci slot was used, and even ehen it was in the other pci slots, it was not sharing an irq with anything anyways, it still does it whilst decodint the Dolby Digital Stream.
Have tried the driver updates for the card and it still does it.
I have the audigy 2 zs platinum witht the li've dri've I/O .
I have taken this card out and put my soundblaster 5. platinum card in, and the li've dri've IR that came with that card, and using the optical in or the coaxial in the same way as the Audigy 2 zs plat li've dri've ,and it decodes the 5. with perfect lip sync, however this is not true dolby digital decdong on the sb 5. card as you have to use the CMSS feature anyways on this card, so even though the ac-3 decode is ticked, it aint true Dolby Digital Decoding anyways.
So i took that card out, and put in my older audigy Platinum 5. card, and teh li've dri've that came with that card, and formatted windows, etc, then after xp went back in installed the audigy drivers etc, then connected the coaxial cable from external dvd player and This also plays the 5. with perfect lip sync, but again however this is not true dolby digital decoding on the audgy card, even tehough the option is selected ac-3 spdif decode in audio hq, You still have to use the CMSS feature to get kind of 5..
I know this to be true as when the 7. Audigy 2 zs plat card is in, when you play dvd from external dvd and use the optical or the coaxial to the fron of the li've dri've that came with audigy 2 zs plat, you get the Dolby Digital Logo appearring on the monitor screen to tell you that it is decoding etc, and teh Quality is very good and you can hear that it is a Dolby Digital 5. stream, APART FROM THE FACT THAT THE AUDIO GOES OUT OF SYNC WITH THE PICTURE.
So I know it has to be down to the actual hardware of the audigy 2 zs plat soundcard or the hardware in the Li've dri've that came with the audigy 2 zs plat soundcard. Its a shame that a lot more people that have bought this pruduct ie the audigy 2 zs platinum version, would not test there li've dri've soundcards dolby digital decoding using an external dvd player, so as we could get a better idea of the problem, AS there are only a couple of other users on this forum that have this harware and they have the same problem, so is it because these cards are faulty, or is it inherint in the hardware that cannot be fixed, cos it aint in the software, but how can we find out when no one seems to be able to tell for sure that a driver update will fix it.
Also Does the Audigy 2 zs platinum Pro suffer from this same lip sync issue whilst using the external dvd players optical out to the optical in to decode dolby digital 5. streams.
Saying as i spent over ?400 on the s750 gigaworks speakers and the Audigy 2 zs platinum soundcard, and that they are only 3-4 months old, and have just been installed into my computer (ie just opened within the last 2 weeks) i am really shocked to learn that nothing can be done and i have wasted a lot of money to get something that cannot do what it is advertised to do, And www.dabs .co.uk are reluctant to refund me my money on the basis that they only do refunds upto 28 days, so in my situation although i purchased the goods 3-4 months ago, i have only just got round to teseting the goods, as i needed the other bits to build computer up , like the case mnotherboard etc etc.
Come on creative, whats the score with this hardware.

I install window 8 and Unfortunatly all drive format. And all drive mix, now i have only 1 DRIVE C. I want Bit locker Drive's data Back

Last sunday i install a window 8 and this window format my all drive & make it 1 drive (DRIVE C). Before all of this i have 5 drive in different size with 1 Bitlocker protect drive.
So i try data recovery software to recover my data. i got back all my data without that ( bitlocker ) protected drive.
so please guys help me how can i get back data from bitlocker protected drives.
please please help me.

Hi,
I sorry for your experience, but there is no way to recovery the data encryped by BitLocker untill now.
BitLocker is designed to make the encrypted drive unrecoverable without the required authentication. When in recovery mode, the user needs the recovery password or recovery key to unlock the encrypted drive. Therefore, we highly recommend
that you store the recovery information in AD DS or in another safe location.
Please refer to the link below for the statement:
http://technet.microsoft.com/de-de/library/ee449438(v=ws.10).aspx#BKMK_RecoveryInfo
Roger Lu
TechNet Community Support

A hardy ghost of Firefox is apparently running in my computer and I am unable to open Firefox, even after Window restarts and an uninstall/re-install. How do I find and fix this problem?

What happened first is Firefox was revving and using most of my CPU, ultimately "not responding" too easily and for too long, so I closed it in order to reopen it, but Firefox remained running in background (Task Mgr, Processes) after closing, continuing to use almost all my CPU, so I ended the process in Task Mgr.
When I went to re-open it, window opened and told me Firefox could not be opened because another "instance"(?) was still running, to close it or restart Windows. I couldn't close it because I already closed it AND ended the process, so I restarted Windows.
When I tried to open Firefox, I got the same pop-up. I think I restarted Windows one more time, and then uninstalled Firefox, except for my personal settings (in order to save the bookmarks, which I couldn't find in the Firefox folder in Program Files (only Favorites, which were not my bookmarks; I later wondered if they were part of the Firefox add-on "Add This" --??).
I then uninstalled Firefox and re-installed it. When I tried to start the newly re-installed program, I had the same pop-up telling me Firefox was already running and to close it or restart Windows.
I searched my computer folders for anything that might help, did a Search of the computer for "Firefox", and was given some Firefox folders and if they weren't from the new re-install, I deleted them. One thing I noticed was that the program folder did NOT have the program (Firefox.exe) icon to start Firefox.
I uninstalled Firefox and had to resort to using Internet Explorer, which I do NOT like. My rich library of bookmarks are who knows where.
I don't know if this is related, but in searching my computer's Administrative Services and Component Tools (and the like) hoping to find something that would help me fix Firefox, I inadvertently learned that "MMC could not create the snap-in. The snap-in might not have been installed correctly. Name: .NET Framework 1.1 Config."
Please help me get Firefox back and figure out what is going on in my computer that led to this. I am a basic user and not techno-computer saavy, so if anyone can help me with this, please give me step-by-step bonehead instructions.
Thank you so much for any help you can offer!

Make sure that Firefox is set as the default browser.
*http://kb.mozillazine.org/Default_browser
*https://support.mozilla.org/kb/How+to+make+Firefox+the+default+browser
*https://support.mozilla.org/kb/Setting+Firefox+as+the+default+browser+does+not+work

I am on windows 7 and I upgraded to 10.0.2 and now it will not open. I have removed firefox completely and uploaded it again and that did not work. So my latest attempt I removed firefox 10 again and uploaded the beta version and once again nothing.

I am on windows 7 and I upgraded to the newest verison of firefox and now it will not open. I have removed firefox completely and uploaded it again and that did not work. I then made sure it could get through my firewall and that did not work. So my latest attempt I removed firefox 10 again and uploaded the beta version hoping that would do it and once again nothing. It will not open at all. Please help - is there a live chat or a number to talk to someone at Firefox?

I think when uninstalling you may also have to choose (tick) to delete the preferences and other personal data like the bookmarks, stored passwords etc. to erase completely. If you are installing afresh, please try right-clicking on the file and '''Run as administrator''' to install. And when uninstalling, please also make sure choose to delete all data and also manually delete any '''Mozilla''', '''Mozilla Firefox''' or '''Firefox''' from %appdata%, %localappdata% and %programfiles%. You can open a location by typing for eg. %appdata% in the '''Run''' box (Windows key + R). You may also have to check the '''VirtualStore''' folder in %localappdata%. Files in the VirtualStore can be problematic. I think a clean installation may help.
[https://www.mozilla.org/en-US/firefox/new/ Firefox]
[http://kb.mozillazine.org/Installation_directory Installation Folder]
[http://kb.mozillazine.org/Profile_folder Profile Folder]
Please note that using system restore would usually damage the Firefox installation.

I brought my itunes library onto a mac from a windows machine and now i have two separate libraries. How can I merge them?

I moved to Mac from a Windows machine where I had downloaded all of my CDs into iTunes. When I got my Mac it only put my purchased items into my library. So I merged my windows library and it created a whole new user account with that on it. I now have two libraries and can only sync music with one account or I lose all of my imported CDs. Help! How do I merge them.

The easiest way is to get both computers on your home network and copy the files over the network. It's easier than you think
Check this earlier thread:
[How do I move my itunes library to new computer|http://discussions.apple.com/thread.jspa?messageID=7937172&#7937172]
That thread mentions Target Disk Mode, which won't help moving from a PC to a Mac. But you can use file sharing to copy the files.
As the articles all say: don't forget to de-authorize your PC before you get rid of it.

Blue screen and restart / ThinkPad T40 2373-94G Windows 7 and 32MB ATI Radeon 9000

Hello !
I'm having a lot of trouble with video driver for windows 7 for ati radeon 9000.
There is no driver for windows 7 and I tryed with driver for winXP, ... etc and didnt find any solution .
Actually driver for windows xp actually works on windows 7, but as soon as I tried to open any application or game I got blue screen with error and computer reboots...
Thank you for any information or solution !
My computer is :
Product: ThinkPad T40 2373-94G [change]
Operating system: Windows 7 [change]
Original description: P M 1.6GHz, 512MB RAM, 80GB 4200rpm HDD, 14.1 SXGA+(1400x1050) TFT LCD, 32MB ATI Radeon 9000, 16x10x24x/8x CD-RW/DVD(slim), Bluetooth/Modem, 1Gb Ether, Intel 802.11b , Sec Chip, UltraNav, 9 cell Batt, WinXP Pro

Welcome to the forum!
As I'm sure you know by know, your GPU is not supported in W7.
That being said, take a look at this thread:
http://forum.thinkpads.com/viewtopic.php?f=57&t=77964
Good luck.
Cheers,
George
In daily use: R60F, R500F, T61, T410
Collecting dust: T60
Enjoying retirement: A31p, T42p,
Non-ThinkPads: Panasonic CF-31 & CF-52, HP 8760W
Starting Thursday, 08/14/2014 I'll be away from the forums until further notice. Please do NOT send private messages since I won't be able to read them. Thank you.

My new 8th gen iPod nano is 'not recognized' by my computer. My computer runs on Windows 7, and I've installed and updated the latest versions of itunes etc, but still to no avail! I've tried different usb ports, troubleshooting...

My computer runs on Windows 7, and I've installed and updated the latest versions of itunes etc, but still to no avail! I've tried different usb ports, troubleshooting, etc... But it still says "One of the USB decuces arrached to this omputer has malfunctioned and windows does not recognize it".
The iPod is brand new, sent to me by Apple as part of the 1st gen replacement programme. I've been using the cable that came with the 1st gen iPod (I bought the first gen second hand) It always worked on my computer with the 1st gen iPod. So I was wondering, do you think I need to replace my cable in order for my PC to recognize my iPod or is it something else?
Thanks

Try a different cable. And are you connecting directly to your computer or through a USB hub?

Ipod not recognized by windows, itunes, and will not charge with pc.

yesterday, when i went to sync some new music onto my 1gen nano, it did not work (duh). i plugged it in 3 times:
-1st, it displayed the "do not connect screen" for one second, and itunes flashed the screen it shows when your ipod is connected, but then the ipod disconnected itself after that one second.
-2nd, windows gave me a message saying the hardware could not be recognized.
-3rd, nothing at all happened, as has been happening each time i try to plug it in since then.
i've done the 5 R's .. and i've tried all the suggestions shown on posts that sound like mine, including these: Windows XP cannot detect an iPod.
USB drivers are not installed properly or are out of date.
iTunes 7 doesn't recognize the iPod.
my ipod will charge when plugged into a wall charger, and it plays normally. also, my brother's ipod (2nd gen nano) is recognized by windows/itunes.

Hello
I have been having nearly the same problem as Crashcup for the past month. Differences being I am operating with Windows Vista and my iPod is a 160GB Classic. I have gone through all the steps in the troubleshooting documents to no result. I attach my iPod and it is not recognized by Windows, iTunes or even in Device Manager. Not even as an "Unknown Device".
I know there is nothing wrong with the USB ports as two different external hard drives and a video game controller work perfectly fine through them. Same goes with the iPod itself; it continues to play and function normally, and is recognized by a charging device completely separate from my laptop. Just when attached to the computer there is no sign of it.
I am very frustrated that there is no further instruction with regard to what to do with an iPod Classic (as referred to by Crashcup: "...it says to take a photo with an iPhone, or a screenshot with an iPod touch or iPad. WHAT ABOUT THE IPOD CLASSIC????)
Any help would be much appreciated.l=

I upgraded to 10.5.0.142 on windows 7 and I can no longer add any music to my libraries

I upgraded to 10.5.0.142 on windows 7 and I can no longer add any music to my libaries.
It makes a notification sound, but there is no message, and it just doesn't do anything.
How frustrating. Considering apple make excellent products, iTunes is terrible.

I find a way to add music.
Make sure iTunes is closed.
Go to the song file on your computer. If the file has the little black musical iTunes symbol as its icon, just double click the file. It should open up in iTunes and stay in you library.
If the little black musical iTunes symbol isn't next to the file, right click the file and go to "Open With" and then click on "iTunes". It should open up in iTunes and stay in your library.
Yeaaa its the long way but that's the only way for now, unfortunately.

Windows 7 and Windows 8 Driver Availability Chart for Creative's products

Hello Everyone,
There is a Knowledge base article that contains the Windows 7 and 8 Driver Availability Chart for Creative's products.
Thank you.
Mod Notes: Updated the link and include Windows 8.

For Windows 7
To run the Hardware and Devices troubleshooter in Windows 7, follow these steps:
Open the Hardware and Devices troubleshooter by clicking the Start button , and then clicking Control Panel.
In the search box, enter troubleshooter, and then click Troubleshooting.
Under Hardware and Sound, click Configure a device.

Windows 7 and Windows 8 in the same computer

I have HP Pavilion HDX9300 with two hard discs. I have installed Windows 7 in och of them and Windows 8 in the other. Both W7 and W8 works when the disc is placed in one of the discplaces but not in the other.
If I want to change from W7 to W8 I thus have to change place for the hard disc. My desire is to change from W7 to W8 without changing places for the harddiscs. Is it possible? If so, how do I do?

I believe the second hard drive bay in the HDX9300 is not bootable. You need to load Windows 8 on the same hard drive as Windows 7 as a dual boot.
http://www.extremetech.com/computing/143380-how-to-dual-boot-windows-8-and-windows-7
You could then use the second drive as storage accessible to both operating systems.

WIndows 7 and Audigy

Similar Messages

Maybe you are looking for