Windows 7 Deployment using SCCM 2012

I am installing Windows 7 Enterprise 64bit on HP Desktops and Laptops using SCCM 2012 task sequence. I captured an image from the reference computer using capture media. The image works fine on Hp Desktops but when I install the same image on HP laptops,
I get an error message right at the end "Windows Setup could not configure Windows to run on this computer's hardware". I captured another image with plain Windows 7 Enterprise without SP1, updates and drivers. it works perfectly fine on all desktops
and laptops both. Below is the setupact and setuperr error logs. Much appreciated.
SETUPACT.LOG
capisp.dll::CryptoSysPrep_Specialize: assigned CAPI machine guid "d01b5e9b-0af5-4b3c-a712-70977e79a177"
2014-08-26 21:19:04, Info capisp.dll::SamConnect failed: c00000dc
2014-08-26 21:19:04, Info capisp.dll::CryptoSysPrep_Specialize: DisableAdministratorIfApplicable failed
2014-08-26 21:19:04, Info capisp.dll::CryptoSysPrep_Specialize: returning 65b
2014-08-26 21:19:04, Error [0x0f0082] SYSPRP LaunchDll:Failure occurred while executing 'C:\Windows\system32\capisp.dll,CryptoSysPrep_Specialize', returned error code 1627[gle=0x000003e5]
2014-08-26 21:19:04, Info IBS Callback_Specialize: Internal Providers Specialized Failed. System can't proceed to handle Internal Providers
2014-08-26 21:19:04, Info IBS Callback_Specialize: Specialize return: [1627]
2014-08-26 21:19:04, Error [0x060435] IBS Callback_Specialize: An error occurred while either deciding if we need to specialize or while specializing; dwRet = 0x65b
2014-08-26 21:19:04, Info [0x0640ae] IBSLIB PublishMessage: Publishing message [Windows Setup could not configure Windows to run on this computer's hardware.]
SETUPERR.LOG
2014-08-26 21:16:24, Error SYSPRP SPPNP: Error 0x25 (CONFIGRET) occurred while determining the buffer size needed to hold the list of devices that are using service usbhub20.
2014-08-26 21:16:24, Error SYSPRP SPPNP: Error 0x424 occurred while opening a handle to the service usbhub20.[gle=0x00000424]
2014-08-26 21:19:04, Error [0x0f0082] SYSPRP LaunchDll:Failure occurred while executing 'C:\Windows\system32\capisp.dll,CryptoSysPrep_Specialize', returned error code 1627[gle=0x000003e5]
2014-08-26 21:19:04, Error [0x060435] IBS Callback_Specialize: An error occurred while either deciding if we need to specialize or while specializing; dwRet = 0x65b

Hi,
From your error log, we could see the root is the incorrect driver.
How did you get the driver in your first image? If you enable "PersistAllDeviceInstalls" configuration when you capture the image, all Plug and Play devices in reference computer are uninstalled during the generalize pass and then reinstalled
during the specialize pass.
However, it‘s not always applied to your laptop.
Thus I suggest you download the proper driver or change the BIOS hard disk drive setting to IDE to check the result.
Warning: This procedure may involve changing your hard disk drive settings in the BIOS. Incorrect changes to the BIOS of your computer can result in serious problems. Microsoft cannot guarantee that problems that result from changes to the
BIOS can be resolved. Change the BIOS settings at your own risk. Incorrect or corrupted BIOS settings can cause startup problems or shutdown problems.
In addition, you could refer to the article below:
“Windows Setup could not configure Windows on this computer’s hardware” installation error on a Windows 7-based or a Windows Server 2008 R2-based computer
http://support.microsoft.com/kb/2466753/en-us
Karen Hu
TechNet Community Support

Similar Messages

Windows 7 deployment using SCCM 2007 SP2

Hi,
We planning to do Windows 7 deployment using SCCM 2007 SP2 so we have some queries regarding same.
Is it possible to take entire HDD backup & restore using SCCM 2007 SP2? Also is it recommended to do so?
What will be the effective method to deploy OS at remote branches?
If we want to save the network bandwidth then what will way to send image to distribution point and client as well.
Is it mandatory to have PXE boot enable in bios & set as first boot preference on each client machine for PXE initiated windows 7 deployment? If so then is there any option to enable PXE boot & set as first preference on client machine
remotely?
Is it possible to deploy OS in other than C drive i.e D or E to have dual boot option?
Which we will be best method to have zero touch deployment without any end user intervention and why?
Please help to clarify.

As Jason said, these are the configurations that requires some high level skills to configure it, the answers are the same as said by Arnav... below links would give you a good heads up for the OSD in SCCM if you still want to try it on your own...
http://download.microsoft.com/download/7/C/9/7C9A54AC-9661-48CA-9A7C-E3D2B5B23CF2/SystemCenterConfigurationManager2007OperatingSystemDeploymentGuide.pdf
http://blogs.technet.com/b/configurationmgr/archive/2009/07/27/a-step-by-step-for-using-osd-through-system-center-configuration-manager-2007.aspx
https://blogs.technet.com/b/birojitn/archive/2010/01/20/windows-7-deployment-using-sccm-2007-sp2.aspx
bluerail

Error while deploying Windows 2008 R2 using SCCM 2012 R2

I am trying to deploy Window 2008 R2 image (captured from a reference machine) using SCCM 2012 R2. I have integrated MDT 2013 with SCCM 2012 R2 and created an MDT task sequence. During deployment, towards the end of Applying image.wim, it gives me
an error that task sequence failed with the error code 0x80070002. And then the system reboots. After reboot, I am able to login to the Windows Server. It seems to work fine, but there are no applications etc installed. Also the _SMSTS log folder is still
present in the C drive. And in the smsts.log file, i can see errors like failed to copy unattend.xml file. Please help me.

Hi,
Error code 0x80070002, it means the system cannot find file specified.
For more information, please review the link below:
Task Sequence Failed with the Error Code 0x80070002
http://prajwaldesai.com/task-sequence-failed-error-code-0x80070002/
Note: Microsoft provides third-party contact information to help you find technical support. This contact information may change without notice. Microsoft does not guarantee the accuracy of this third-party contact information.
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

Window OS deployment through SCCM 2012 R2

Hi all. I am trying to deploy Window OS by using SCCM2012 R2. Here is our server setup: SCCM2012 R2 server is in our data center, running SCCM2012 R2 (no other role on this server) in a different subnet, VLAN; while client PC is in our office,
also in its own subnet and VLAN. We've got 2 DHCP server and domain controller, both role installed on one server; one located in the datacenter where SCCM2012R2 server is located, and another one located in the office. I've done the following:
The OS image has been captured
Operating system package has been created
A task sequence has been created
A collection created
All necessary deployments have been completed
Network account has been created
However, during the PXE boot on the client PC, it respond with the error:
PXE-E53: No boot filename received
PXE-M0F: Exiting PXE ROM.
If the SCCM2012 server is located in the same subnet and location, then I guess this should work (with DHCP option 60, etc.). However, since the server and the client were in different location, VLAN, and subnet, I am wondering what else I need to
configure to successfully deploy OS through SCCM2012 R2. In our layer 3 switch, I can see it have the "ip helper-address" entry pointing to our DHCP server at the data center, I am wondering if I add another "ip helper-address" that
points to the SCCM2012 R2 server would make any differences. Any suggestion is welcomed. Thank you.

Ok, I can confirmed I need to add my SCCM2012 server IP address as a ip helper IP to our layer 3 switch configuration, which act as the default gateway in our office. I haven't try out the DHCP option, so not sure if that work, but ip helper is what
I need to solve my PXE boot issue. Once I done the ip helper command, I am able to complete the PXE boot on the client machine, and enter the task sequence. Now I am having a different problem. After the WIM file had been downloaded and installed,
task sequence now responded with error "0x80000045" and auto restarted the machine. More oddly, Windows start up fine and I am able to login, but I am pretty sure rest of the task sequence haven't been completed, because it should join the machine to
the domain, which it haven't done so. I will open another question for this issue. Thanks guys for pointing me to the correct direction.

Adobe Creative Cloud Enterprise Deployment Issues using SCCM 2012 R2

Hi,
I have been trying to deploy Adobe Creative Cloud Enterprise to Windows 8.1 machines that are identical, using SCCM 2012 R2.
The Adobe package seems fine, because it seems to deploy successfully to some machines. And SCCM 2012 R2 has been configured correctly, as I can deploy other software using it, and again, it deploys Adobe CC successfully to some of the machines.
I have tried comparing the package that is downloaded on the test machine/client machine, with the original package on the distribution point, using Beyond Compare, and there are no differences.
I have contacted Adobe Enterprise Support, and they asked me to send to them log files from Event Viewer, the msi installer, and other Adobe logs, from the machine that failed the deployment. However, after Adobe studying them, they told me that they could not identify any problems... Strange, because I could have sworn that I saw error 1603 pop up over 20 times on different machines indicating that the 'Set-up.dat' file had a problem with it.
After all the testing on over 20 identical machines (same hardware/same software), using different configurations on SCCM 2012 R2 and the client machines, I still can't seem to have a reliable solution to deploying Adobe CC.
The fact that it deploys successfully on one machine and fails on another, or sometimes deploy to two machines and fail on another (simultaneously), is something that I don't understand.
Another thing is that, if I retry the deployment 10-15 times after it failed the first time, it might go through...
Adobe Enterprise Support asked me if they could remote into a machine that failed the deployment to have a look at it and I agreed to that option, but it seems like my issue has been ignored because they never got back to me.
Has anyone had this kind of problem or anything similar before?
I need to be able to deploy this remotely to 100+ machines. So installing manually is not an option.
Any help is appreciated.
This was posted in the wrong section a few days ago. I'm hoping I can get some help here.
Case Number: 1862659812
UPDATE: I spoke to Adobe Customer Support and after 1.5 hours on the phone with a remote session going on, problem was still not solved or identified. Additional log files have been sent and now I'm waiting for a call back.

Hi Robert,
We seem to be having a very similar issue. Our installs would randomly fail with error code 1603 and an error message about a fault in Set-up.dat. Failure rate was near 95% on our 900 machines. Adobe Support and Karl having been looking into our issues but so far no solution has been found.
Having done a lot of investigating we've managed to deploy our package using a schedule task running as a domain admin. This is a nasty solution and we don't intend on using this permanently, but we needed to get the package out.
Are you seeing any of the following:
Entries in PDApp.log:
[FATAL] | | ASU | DeploymentManager | DeploymentManager | | | 2900 | The Bootstrapper Process is (5).Stopping the installation process.
[FATAL] | | ASU | DeploymentManager | DeploymentManager | | | 2900 | The return code from the Adobe Installer Process is (33).Stopping the uninstallation process.
[WARN] | | ASU | DeploymentManager | DeploymentManager | | | 2900 | Failed to find the pdb database.
[WARN] | | ASU | DeploymentManager | DeploymentManager | | | 2900 | Failed to get the local payload database handle.
Event Log:
Faulting application name: Set-up.dat, version: 2.9.1.474, time stamp: 0x54e11f94
Faulting module name: Set-up.dat, version: 2.9.1.474, time stamp: 0x54e11f94
Exception code: 0xc0000005
Fault offset: 0x000d7c52
Faulting process id: 0xb40
Faulting application start time: 0x01d072a073861622
Faulting application path: \\server.name.path\Adobe CC\FullPackage\Build\ASU\Set-up.dat
Faulting module path: \\server.name.path\Adobe CC\FullPackage\Build\ASU\Set-up.dat
Report Id: c86d9216-de93-11e4-8284-782bcb99e284
Faulting package full name:
Faulting package-relative application ID:
Installer Log
Indicates it can't find the Media_db. We noticed that the folder C:\Program Files (x86)\Common Files\Adobe\caps doesn't get created on the machines were the install fails, so error message is correct in that there isn't a Media_db.db. Sysinterals Process Monitor seems to show that the setup tried to create the folder/files but they don't actually get created. Copying a Media_db into the folder from another machine seems to allow the installation to almost finish, but unsurprisingly you end up with problems later on.

Deploy Internet explorer 11 with latest updates using SCCM 2012

Hello,
I'd like deploy IE11 with the latest updates included. The reason is that I want the IE 11 enterprise mode to be available as soon as IE11 gets installed.
I don't want to wait an update scan cycle to trigger the installation of the updates.
What is the best way to achieve that using SCCM 2012 ?
Regards,
Michel

Hi,
You have to capture the installation package with latest update by using IEAK 11 on the computer which has the IE11 with this feature.
GP to enable this feature:
Administrative Templates\Windows Components\Internet Explorer\Let users turn on and use Enterprise Mode from the Tools menu
This is only for Windows 7 computer.
As I mentioned above, for Windows 8.1, we can only deploy Windows 8.1 update 1 to add this feature to IE11, since there is no separated update can be installed for IE11 on Windows 8.1 to implement this.
Windows 8.1
Update (32-bit version)
Windows 8.1
Update (64-bit version)
Kate Li
TechNet Community Support

Deploy Java Updates using SCCM 2012 SP1 and SCUP 2011

What is the best way to deploy Java updates using sccm 2012 SP1 and SCUP 2011?

I didn´t find Kent´s blog useful when talking about Java. I can deploy Adobe products fine, but I have to import Java manually because not having Shavlik certificate. So with that said, I have the fallowing problem;
I have full offline installer unpacked, .msi file and Data1.cab. When I´m importing these binaries to SCUP, I only can point to .msi. Doing that, installation fails in client side fails because of lack of data1.cab fine, which is the main file.
Should I use some other downloaded files of Java? I couldn´t find any Java-update-file only type of files to download.

Pre deploy applications sccm 2012

Hey Everyone,
I have a question regarding deployment of software. Current layout is as follows : 2200 machines ranging from always on desktops to about 400 only laptop users. We use SCCM 2012 to deploy applications etc. I am currently updating java and Imprivata
Single Sign On. Regardless the process is to remove the old versions of JAVA , install a newer one , once that is complete lay down a newer version of Single Sign-On which requires a reboot. Since one depends on a another we decided that this is the best opportunity
to update both. Anyway I push the software out to to machine collections as all machines need this regardless of users.
I cant get the laptops that go home for the day , since I can't deploy during the day the machines are not getting this update. There is a setting within SCCM that allows a deployment to be " predeployed" to the users machine. Is there anyway
I can utilize that to apply to the machines so that even when a laptop is offline the content is already pre-deployed to the machine so all that needs to happen is ; a deadline to be set
and the clients to be configured to automatically install required software after business hours ? I can push a script that would copy the installation files to the machines and kick of a script or a scheduled task to install the updates ,
or many other ways. But I really wanted to use SCCM and since I noticed that check box for pre deplyment of content to the users machine seems like what I want. But since it targets users primary device and I am deploying to a device collection targeting machines
not users it doesn't seem to be working. Any ideas ? Is this possible ?

I have looked at Powershell deployment toolkit as it offers users the ability to snooze installs etc. But I don't have the time to adjust my deployment to this format as my deadline is coming up. But going back to your comment about packages having the ability
to pre download content , wow that is awesome - huge limitation on application types in my opinion. Let me walk you through my mind set to see if I got the logic down please.
1) I set the Scheduling on a deployment to a set deadline of 11/5/2014.
2) On the User Experience tab I set the following 2 check boxes : When the installation deadline is reached , allow the following activities to be performed :
a) Install Software
b) System restart if required to complete the installation - ( Do I need to set this if my deployment type : User Experience tab has the setting set of " Configuration manager client will force a mandatory device restart "
3) With regards to Maintenance Window and Work Hours do I need to worry about anything here ? I know that if the deadline is set to a time where the maintenance window doesn't match it will be applied at the next maintenance window. But do I need to set
anything else here to have this automatically get apply ?
4 And last on the client side within the software center - options tab - computer maintenance " automatically install or uninstall required software and restart the computer only outside of the specified business hours " do I need to set this check
box ? And do I need to specify logon hours to match up with the maintenance windows to have the software try and deploy prior to deadline but still offline ?
What I am trying to achieve is to get the software pre downloaded to the machines and then automatically get deployed during off hours but hopefully prior to the deadline. Meaning is there anyway using any of the mentioned steps above to have the system
try and install the packages everyday between certain hours and once the deadline is reached to just install ?

Zero touch deployment using SCCM

Hi,
As SCCM is called as zero touch deployment method for operating system deployment. So please help me to clear my below doubts –
How SCCM take care of backup & restore of entire HDD, if SCCM does not take care of backup & restore of entire HDD then how we can say it is zero touch deployment method?

we can use USMT tool with SCCM to decide what we need to backup. I think good planned infrastructure will always have users data on file servers rather than on user's local system. please refer below few URLs for more information:
http://technet.microsoft.com/en-us/magazine/jj127984.aspx
http://technet.microsoft.com/en-us/library/dd560793(v=ws.10).aspx
http://technet.microsoft.com/en-us/library/hh397289.aspx
http://blogs.technet.com/b/meacoex/archive/2013/02/19/migrate-windows-xp-to-windows-7-using-sccm-2012.aspx
Prashant Patil

How to configure SNMP on all managed client using SCCM 2012 SP1

hi ,
do you know How to configure SNMP on all managed client using SCCM 2012 SP1?

As a side note, I made an interesting discovery last week: the SNMP Service is deprecated in Windows Server 2012. Why would you want to use SNMP on an actual Windows OS though? There are far better ways available to monitor Windows. I'm sure that lines
up with why they deprecated it.
Jason | http://blog.configmgrftw.com

Lync 2013 x64 silent client deployment via SCCM 2012 SP1

Greetings everyone!
I ran into a problem with Lync 2013 x64 silent deployment.
I need to provide every workstation with Lync 2013 client, so i decided to use deployment via SCCM 2012 sp1.
I created 2 msp files with OCT, one based on x86 Office 2013 Proplus, and other based on x64 Office 2013 Proplus.
Added them as applications to sccm software library.
Deployment of Lync 2013 x86 application was a success with over than 80% compliance.
But all Lync 2013 x64 automatic installations finish with different errors.
I created special device collection for workstations with office 2010 x64 and 2013 x64, because i can't install other architecture products once it has x64 product installed.
My membership query-rules for this collection:
Office 2013 x64
select SMS_R_SYSTEM.ResourceID,SMS_R_SYSTEM.ResourceType,SMS_R_SYSTEM.Name,SMS_R_SYSTEM.SMSUniqueIdentifier,SMS_R_SYSTEM.ResourceDomainORWorkgroup,SMS_R_SYSTEM.Client from SMS_R_System inner join SMS_G_System_INSTALLED_SOFTWARE on SMS_G_System_INSTALLED_SOFTWARE.ResourceId
= SMS_R_System.ResourceId where UPPER(SMS_G_System_INSTALLED_SOFTWARE.SoftwareCode) = "{90150000-0011-0000-1000-0000000FF1CE}"
Office 2010 x64
select SMS_R_SYSTEM.ResourceID,SMS_R_SYSTEM.ResourceType,SMS_R_SYSTEM.Name,SMS_R_SYSTEM.SMSUniqueIdentifier,SMS_R_SYSTEM.ResourceDomainORWorkgroup,SMS_R_SYSTEM.Client from SMS_R_System inner join SMS_G_System_INSTALLED_SOFTWARE on SMS_G_System_INSTALLED_SOFTWARE.ResourceId
= SMS_R_System.ResourceId where UPPER(SMS_G_System_INSTALLED_SOFTWARE.SoftwareCode) = "{90140000-0011-0000-1000-0000000FF1CE}"
My application deployment type points to setup.exe in office 2013 x64 installation folder, where i created msp file in updates folder via OCT and edited config.xml file in proplus.ww folder.
So my installation program looks like this setup.exe /adminfile updates\1lync.msp /config proplus.ww\config.xml
The same configuration works with Lync 2013 x86 deployment, except other setup folders.
When i try running installation program setup.exe with /adminfile and /config parameters locally, it installs successfully without errors or warnings.
I'm trying to find out problem source, does anyone have ideas what I am doing wrong?
Also i'm trying to reduce office 2013 installation folder size, what subfolders are necessary for Office 2013 proplus installation (still installing only lync with common files and tools)? Because now 3.5 GB package is quite hard to distribute to sccm secondary
sites with deployment point.
Thanks in advance.

Hi,
Here are some tips and tricks for your reference.
Tips and Tricks: Deploying Lync 2013 client using SCCM 2012 | Lync 2013 Client Customization for SCCM 2012 Deployment Package
http://zahirshahblog.com/2014/01/08/tips-and-tricks-deploying-lync-2013-client-using-sccm-2012-lync-2013-client-customization-for-sccm-2012-deployment-package/
Note: Microsoft provides third-party contact information to help you find technical support. This contact information may change without notice. Microsoft does not guarantee the accuracy of this third-party contact information.
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

For find activated lync client using SCCM 2012

Hi All,
In my current company we have in deployed lync client. But we are not sure how many clients are activated.
Is there any way to find which system got activated using SCCM 2012.
Please suggest and let me know any reference.
Thanks

I really don't know, but I would guess that a file or registry key would change once it's activated. Basically, I would simply compare an activated system with a not activated system and look for the difference. Once you've located that you can create
a compliance setting to see how many system are actived, or not.
My Blog: http://www.petervanderwoude.nl/
Follow me on twitter: pvanderwoude

Import certificate in to Firefox certificate store using SCCM 2012 R2

Hello,
I'm trying to figure out how to import a certificate in to the Firefox certificate store using SCCM 2012 R2 to push out to 8,000 computers. The only answer I have found was to import the certificate manually on my computer and copy the "cert8.db" file out of my "appdata\Roaming\Mozilla\Firefox\Profiles\******.default\" folder and use this file to copy to all profiles on each computer. I have not tried this since I believe this is not a standard practice. Is there a Firefox certificate scripting tool that I can use to accomplish this or a recommended way?
Thanks,
Matt

Hi,
It is listed here:http://technet.microsoft.com/en-us/library/gg712298.aspx
There are a number of limitations to supporting workgroup computers:
Workgroup clients cannot locate management points from Active Directory Domain Services, and instead must use DNS, WINS, or another management point.
Global roaming is not supported, because clients cannot query Active Directory Domain Services for site information.
Active Directory discovery methods cannot discover computers in workgroups.
You cannot deploy software to users of workgroup computers.
You cannot use the client push installation method to install the client on workgroup computers.
Workgroup clients cannot use Kerberos for authentication and so might require manual approval.
A workgroup client cannot be configured as a distribution point. System Center 2012 Configuration Manager requires that distribution point computers be members of a domain.
Regards,
Jörgen
-- My System Center blog ccmexec.com -- Twitter
@ccmexec

How to update Office 365 using SCCM 2012 R2?

Hi,
I am using SCCM 2012 R2 and Office 365 ProPlus.
At products list (Software Update Point Components Properties) there is not Office 365.
Office 365 automatically updates from Internet.
I need to know the following:
How to disable Internet automatic updates at Office 365
How to deploy updates for Office 365 from SCCM.
Thanks in advance!

Funny thing you can't deploy those updates via WSUS and/ or ConfigMgr. See for more information:
http://blogs.technet.com/b/office_resource_kit/archive/2014/01/21/managing-updates-for-office-365-proplus-part-1.aspx
Also, make sure to read part 2 as it provides dome guidance on controlled testing of those updates.
My Blog: http://www.petervanderwoude.nl/
Follow me on twitter: pvanderwoude

Office 365 ProPlus deployment from SCCM 2012

hi, I am trying to deploy office 365 proplus using sccm 2012 , everything seems to good, setup.exe run with /configure (path for file). but it is only running nothing installed on systems.
I used for reference
http://www.youtube.com/watch?v=-PNTdap9hwU
https://sccmguru.wordpress.com/tag/office-365-proplus/
please help .
manish yadav

Hi,
Please refer to the links below:
Using Office 365 ProPlus with the Office Deployment Tool
http://www.petri.com/using-office-365-proplus-with-office-deployment-tool.htm
How to deploy Office 365 with Click-to-Run and ConfigMgr
http://www.configmgr.no/2013/06/09/how-to-deploy-office-365-with-click-to-run-and-configmgr/
Getting started guide for deploying Office 365 ProPlus
http://technet.microsoft.com/en-us/library/jj839718(v=office.15).aspx
Note: Microsoft provides third-party contact information to help you find technical support. This contact information may change without notice. Microsoft does not guarantee the accuracy of this third-party contact information.
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

Windows 7 Deployment using SCCM 2012

Similar Messages

Maybe you are looking for