Window OS deployment through SCCM 2012 R2

Hi all. I am trying to deploy Window OS by using SCCM2012 R2. Here is our server setup: SCCM2012 R2 server is in our data center, running SCCM2012 R2 (no other role on this server) in a different subnet, VLAN; while client PC is in our office,
also in its own subnet and VLAN. We've got 2 DHCP server and domain controller, both role installed on one server; one located in the datacenter where SCCM2012R2 server is located, and another one located in the office. I've done the following:
The OS image has been captured
Operating system package has been created
A task sequence has been created
A collection created
All necessary deployments have been completed
Network account has been created
However, during the PXE boot on the client PC, it respond with the error:
PXE-E53: No boot filename received
PXE-M0F: Exiting PXE ROM.
If the SCCM2012 server is located in the same subnet and location, then I guess this should work (with DHCP option 60, etc.). However, since the server and the client were in different location, VLAN, and subnet, I am wondering what else I need to
configure to successfully deploy OS through SCCM2012 R2. In our layer 3 switch, I can see it have the "ip helper-address" entry pointing to our DHCP server at the data center, I am wondering if I add another "ip helper-address" that
points to the SCCM2012 R2 server would make any differences. Any suggestion is welcomed. Thank you.

Ok, I can confirmed I need to add my SCCM2012 server IP address as a ip helper IP to our layer 3 switch configuration, which act as the default gateway in our office. I haven't try out the DHCP option, so not sure if that work, but ip helper is what
I need to solve my PXE boot issue. Once I done the ip helper command, I am able to complete the PXE boot on the client machine, and enter the task sequence. Now I am having a different problem. After the WIM file had been downloaded and installed,
task sequence now responded with error "0x80000045" and auto restarted the machine. More oddly, Windows start up fine and I am able to login, but I am pretty sure rest of the task sequence haven't been completed, because it should join the machine to
the domain, which it haven't done so. I will open another question for this issue. Thanks guys for pointing me to the correct direction.

Similar Messages

MS Office Pro 2013 Deployment through SCCM 2012 R2

Hi Friends,
I have deployed MS Office Pro 2013 through SCCM 2012. But from Windows 7 Client Machines It's not Installing. Noticed following error in Software Center.
I'm testing two deployments before bring into production.
Test Machine 1 : Purpose = Available
From Software Center I have found Test Machine 1 is Status failed.
Test Machine 2 : Purpose = Required
From Software Center I have found Test Machine 2 is Status post due-will be retried
The following Error code is same for both Machines.
====================================================
The software change returned error code 0x87D00607(-2016410105).
====================================================
Any idea please .
Regards,Ali

Hi,
Check out this great guide from Ronni on how to deploy Office 2013 using Configuration Manager 2012, a good read.https://gallery.technet.microsoft.com/office/How-to-Deploying-Office-0f954e7f
Are the content succefully deployed to all DPs?
Regards,
Jörgen
-- My System Center blog ccmexec.com -- Twitter
@ccmexec

CRM2013 Silent deployment through SCCM 2012 R2

Hello.
First of all im sorry, if im posting in the wrong Forum - but this seemed as the correct one.
I want to deploy CRM 2013 Outlook Client, through Software center - but i cant seem to get it working.
I cant seem to find a way, to disable / accept the License Agreement automatically, so that our Domain Users can enjoy a completely silent CRM deployment.
I have tried several guides, and i have also tried with SetupClient.exe /A - and the "guide" completes, but theCrmClient_32.msi dosent work.
I would really appreciate, if some of you guys would help me out :)
We are using SCCM 2012 R2
Datatechnician

Looks like you need the /Q switch for this
http://msdn.microsoft.com/en-us/library/hh699665.aspx
/Q
Quiet mode installation. This parameter requires a configuration file in XML format. The /i parameter contains the name of the XML configuration file. No dialog boxes or error messages will appear on the display screen. To capture error message information,
include the log file parameter (/L or /LV).
Gerry Hampson | Blog:
www.gerryhampsoncm.blogspot.ie | LinkedIn:
Gerry Hampson | Twitter:
@gerryhampson
Hello.
Ive found the solution my self :)
SetupClient.exe /quiet /passive /norestart
I didnt thought that you could have a /q and /p at the same time
Datatechnician

Windows 7 Deployment using SCCM 2012

I am installing Windows 7 Enterprise 64bit on HP Desktops and Laptops using SCCM 2012 task sequence. I captured an image from the reference computer using capture media. The image works fine on Hp Desktops but when I install the same image on HP laptops,
I get an error message right at the end "Windows Setup could not configure Windows to run on this computer's hardware". I captured another image with plain Windows 7 Enterprise without SP1, updates and drivers. it works perfectly fine on all desktops
and laptops both. Below is the setupact and setuperr error logs. Much appreciated.
SETUPACT.LOG
capisp.dll::CryptoSysPrep_Specialize: assigned CAPI machine guid "d01b5e9b-0af5-4b3c-a712-70977e79a177"
2014-08-26 21:19:04, Info capisp.dll::SamConnect failed: c00000dc
2014-08-26 21:19:04, Info capisp.dll::CryptoSysPrep_Specialize: DisableAdministratorIfApplicable failed
2014-08-26 21:19:04, Info capisp.dll::CryptoSysPrep_Specialize: returning 65b
2014-08-26 21:19:04, Error [0x0f0082] SYSPRP LaunchDll:Failure occurred while executing 'C:\Windows\system32\capisp.dll,CryptoSysPrep_Specialize', returned error code 1627[gle=0x000003e5]
2014-08-26 21:19:04, Info IBS Callback_Specialize: Internal Providers Specialized Failed. System can't proceed to handle Internal Providers
2014-08-26 21:19:04, Info IBS Callback_Specialize: Specialize return: [1627]
2014-08-26 21:19:04, Error [0x060435] IBS Callback_Specialize: An error occurred while either deciding if we need to specialize or while specializing; dwRet = 0x65b
2014-08-26 21:19:04, Info [0x0640ae] IBSLIB PublishMessage: Publishing message [Windows Setup could not configure Windows to run on this computer's hardware.]
SETUPERR.LOG
2014-08-26 21:16:24, Error SYSPRP SPPNP: Error 0x25 (CONFIGRET) occurred while determining the buffer size needed to hold the list of devices that are using service usbhub20.
2014-08-26 21:16:24, Error SYSPRP SPPNP: Error 0x424 occurred while opening a handle to the service usbhub20.[gle=0x00000424]
2014-08-26 21:19:04, Error [0x0f0082] SYSPRP LaunchDll:Failure occurred while executing 'C:\Windows\system32\capisp.dll,CryptoSysPrep_Specialize', returned error code 1627[gle=0x000003e5]
2014-08-26 21:19:04, Error [0x060435] IBS Callback_Specialize: An error occurred while either deciding if we need to specialize or while specializing; dwRet = 0x65b

Hi,
From your error log, we could see the root is the incorrect driver.
How did you get the driver in your first image? If you enable "PersistAllDeviceInstalls" configuration when you capture the image, all Plug and Play devices in reference computer are uninstalled during the generalize pass and then reinstalled
during the specialize pass.
However, it‘s not always applied to your laptop.
Thus I suggest you download the proper driver or change the BIOS hard disk drive setting to IDE to check the result.
Warning: This procedure may involve changing your hard disk drive settings in the BIOS. Incorrect changes to the BIOS of your computer can result in serious problems. Microsoft cannot guarantee that problems that result from changes to the
BIOS can be resolved. Change the BIOS settings at your own risk. Incorrect or corrupted BIOS settings can cause startup problems or shutdown problems.
In addition, you could refer to the article below:
“Windows Setup could not configure Windows on this computer’s hardware” installation error on a Windows 7-based or a Windows Server 2008 R2-based computer
http://support.microsoft.com/kb/2466753/en-us
Karen Hu
TechNet Community Support

How to repackage "jre-7u72-windows-i586.exe" application and deploy through SCCM 2012

Hi,
Along with IE 11 we are planning to deploy "jre-7u72-windows-i586.exe"
Created transform file for "jre-7u72-windows-i586.exe" by using Adminstudio Installshield.
Identified vendor .MSI file at
%AppData%\LocalLow\Sun\Java\jre1.7.0_72\jre1.7.0_72.msi"
%AppData%\LocalLow\Sun\Java\jre1.7.0_72\Data1.cab
Created Transform file
Created transform file for "jre-7u72-windows-i586.exe" by using Adminstudio Installshield with the Tuner feature
My queries:
Do we have any best practices while repackaging “jre-7u72-windows-i586.exe?” by Adminstudio
How to deploy the jre-7u72-windows-i586.exe application assuming with parallel deployment of IE
11.
Do we uninstall lower versions of Java when installing any newer versions like jre-7u72-windows-i586.exe?
if yes then how to handle
Do we install jre-7u72-windows-i586.exe application without uninstallations of any lower version of JAVA , if yes then how to handle
Looking for best practices / Customizations ?
Thanks, appreciate your help.
Han,
Gc.Hanumareddy

Alternatively, why not actually reference Oracle official documentation or post in their forums (because as Torsten said, this really has nothing to do with ConfigMgr or Microsoft even).
http://java.com/en/download/help/msi_install.xml looks to be a great place to start.
Jason | http://blog.configmgrftw.com | @jasonsandys

How to deploy .msp files through SCCM 2012

Team,
Can you please help me to deploy .msp files through SCCM 2012?
Regards,
Mahadev Nitture

I tried to search and got few things but didn't understand to proceed with.
Please help me with this.
Regards,
Mahadev Nitture
You can use a typical/standard application deployment method (just a minor change because of MSPfile).
Here are some guides, for typical application deployment:
http://technet.microsoft.com/en-us/library/gg682159.aspx
http://www.gerryhampsoncm.blogspot.ie/2013/03/sccm-2012-sp1-step-by-step-guide-part_7075.html
Familiarise yourself with these methods, then return to the example suggested by Torsten for specific steps for MSP:
https://social.technet.microsoft.com/Forums/en-US/3dac27fd-ce4f-4d3d-946b-d08d4c7f5af5/best-way-to-deploy-an-msp?forum=configmanagerapps
Don
(Please take a moment to "Vote as Helpful" and/or "Mark as Answer", where applicable.
This helps the community, keeps the forums tidy, and recognises useful contributions. Thanks!)

SP1 does not get installed when the machine is set to Japanese Language, software push through sccm 2012

Hi,
Please help me with the below issue, iam trying to deploy Service pack 1 on Windows 7 , 32 Bit OS
SP1 does not get installed when the machine is set to Japanese Language, software push through sccm 2012 , it does gets installed of installed manually, by remoting into the machine
also it gets installed through sccm when the machine is set to english language,
Thank you
Tanoj
OSLM ENGINEER - SCCM 2007 & 2012

Hi Friends,
we are deploying the SP1 via SCCM 2012 , and the success rate is around 50 %, its a Light touch installation where user will initiate the installation via Software Center ( Web based )
i was able to gather few errors , and this are the errors which failed during SP1 Installation 0x800f0828,
some errors which sccm reports display are
11171
10008
10021-
17031 -
1602 - User Cancelled installation
113 - No more internal file identifiers available
10070 - File handle reference is no longer available
10050 - A socket operation encountered a dead network
11170 - The task sequence manager could not successfully complete execution of the task sequence
i could not find the reason for some of the errors, also i am looking for a fix/woraround if any
Also i have noticed that in few computers the task seq failed at a place where after the sp1 installation a reboot happens and then PGP BYPASS utility is uninstalled, it did not start the PGP bypass uninstall after reboot
is there a way to cut short the Task seq and keep it simple ?
right now its like this
1. checking for prerequisite : checks for OS Name and OS version
2. installs PGP Bootgaurd Bypass
3. System Restart
4. Installing Windows 7 Service Pack 1
5. Final Restart
6. uninstall PGP Bootgaurd Bypass
Regards
Tanoj
OSLM ENGINEER - SCCM 2007 & 2012

Windows 7 deployment using SCCM 2007 SP2

Hi,
We planning to do Windows 7 deployment using SCCM 2007 SP2 so we have some queries regarding same.
Is it possible to take entire HDD backup & restore using SCCM 2007 SP2? Also is it recommended to do so?
What will be the effective method to deploy OS at remote branches?
If we want to save the network bandwidth then what will way to send image to distribution point and client as well.
Is it mandatory to have PXE boot enable in bios & set as first boot preference on each client machine for PXE initiated windows 7 deployment? If so then is there any option to enable PXE boot & set as first preference on client machine
remotely?
Is it possible to deploy OS in other than C drive i.e D or E to have dual boot option?
Which we will be best method to have zero touch deployment without any end user intervention and why?
Please help to clarify.

As Jason said, these are the configurations that requires some high level skills to configure it, the answers are the same as said by Arnav... below links would give you a good heads up for the OSD in SCCM if you still want to try it on your own...
http://download.microsoft.com/download/7/C/9/7C9A54AC-9661-48CA-9A7C-E3D2B5B23CF2/SystemCenterConfigurationManager2007OperatingSystemDeploymentGuide.pdf
http://blogs.technet.com/b/configurationmgr/archive/2009/07/27/a-step-by-step-for-using-osd-through-system-center-configuration-manager-2007.aspx
https://blogs.technet.com/b/birojitn/archive/2010/01/20/windows-7-deployment-using-sccm-2007-sp2.aspx
bluerail

How to manage Work group Computer through SCCM 2012 R2

Hello..Experts,
We have to manage the Workgroup Computers both Linux and windows Environment through SCCM 2012 R2.
what are limitation associated with managing Workgroup computer both with Linux and windows Computers through SCCM.
Please help us how to achieve this.

Windows devices that are Workgroup members have the same features for management as domain joined devices except that it is slightly more difficult to get the client installed on these 'unmanaged' devices.
The Linux computers have only basic support for Inventory, Application Management, and Compliance.
I hope that helps,
Nash
Nash Pherson, Senior Systems Consultant
Now Micro -
My Blog Posts
If you've found a bug or want the product worked differently,
share your feedback.
<-- If this post was helpful, please click "Vote as Helpful".

Lync 2013 x64 silent client deployment via SCCM 2012 SP1

Greetings everyone!
I ran into a problem with Lync 2013 x64 silent deployment.
I need to provide every workstation with Lync 2013 client, so i decided to use deployment via SCCM 2012 sp1.
I created 2 msp files with OCT, one based on x86 Office 2013 Proplus, and other based on x64 Office 2013 Proplus.
Added them as applications to sccm software library.
Deployment of Lync 2013 x86 application was a success with over than 80% compliance.
But all Lync 2013 x64 automatic installations finish with different errors.
I created special device collection for workstations with office 2010 x64 and 2013 x64, because i can't install other architecture products once it has x64 product installed.
My membership query-rules for this collection:
Office 2013 x64
select SMS_R_SYSTEM.ResourceID,SMS_R_SYSTEM.ResourceType,SMS_R_SYSTEM.Name,SMS_R_SYSTEM.SMSUniqueIdentifier,SMS_R_SYSTEM.ResourceDomainORWorkgroup,SMS_R_SYSTEM.Client from SMS_R_System inner join SMS_G_System_INSTALLED_SOFTWARE on SMS_G_System_INSTALLED_SOFTWARE.ResourceId
= SMS_R_System.ResourceId where UPPER(SMS_G_System_INSTALLED_SOFTWARE.SoftwareCode) = "{90150000-0011-0000-1000-0000000FF1CE}"
Office 2010 x64
select SMS_R_SYSTEM.ResourceID,SMS_R_SYSTEM.ResourceType,SMS_R_SYSTEM.Name,SMS_R_SYSTEM.SMSUniqueIdentifier,SMS_R_SYSTEM.ResourceDomainORWorkgroup,SMS_R_SYSTEM.Client from SMS_R_System inner join SMS_G_System_INSTALLED_SOFTWARE on SMS_G_System_INSTALLED_SOFTWARE.ResourceId
= SMS_R_System.ResourceId where UPPER(SMS_G_System_INSTALLED_SOFTWARE.SoftwareCode) = "{90140000-0011-0000-1000-0000000FF1CE}"
My application deployment type points to setup.exe in office 2013 x64 installation folder, where i created msp file in updates folder via OCT and edited config.xml file in proplus.ww folder.
So my installation program looks like this setup.exe /adminfile updates\1lync.msp /config proplus.ww\config.xml
The same configuration works with Lync 2013 x86 deployment, except other setup folders.
When i try running installation program setup.exe with /adminfile and /config parameters locally, it installs successfully without errors or warnings.
I'm trying to find out problem source, does anyone have ideas what I am doing wrong?
Also i'm trying to reduce office 2013 installation folder size, what subfolders are necessary for Office 2013 proplus installation (still installing only lync with common files and tools)? Because now 3.5 GB package is quite hard to distribute to sccm secondary
sites with deployment point.
Thanks in advance.

Hi,
Here are some tips and tricks for your reference.
Tips and Tricks: Deploying Lync 2013 client using SCCM 2012 | Lync 2013 Client Customization for SCCM 2012 Deployment Package
http://zahirshahblog.com/2014/01/08/tips-and-tricks-deploying-lync-2013-client-using-sccm-2012-lync-2013-client-customization-for-sccm-2012-deployment-package/
Note: Microsoft provides third-party contact information to help you find technical support. This contact information may change without notice. Microsoft does not guarantee the accuracy of this third-party contact information.
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

How do i get an .msi for my Adobe x std/pro versions so I can deploy through SCCM?

How do i get an .msi for my Adobe x std/pro versions so I can deploy through SCCM?

It should be on the media you purchased or ESD download.
Ben

Removing IE 11 from 500+ machines through SCCM 2012

We have installed Windows Update yesterday through SCCM which include IE11.
Now there are few applications not compatible with IE11 and need to roll back (only IE 11, not the entire Windows update)
Kindly suggest a quick way forward.
Thanks a lot.

Great.. Thanks a lot Jorgen
I am trying this, right now.
best regards,
some alternative options (in case Jörgen's suggestion doesn't work for you)
http://blogs.msdn.com/b/askie/archive/2014/03/28/command-line-options-available-to-uninstall-internet-explorer.aspx
http://blogs.msdn.com/b/how_to_uninstall_ie11/archive/2014/02/22/how-to-uninstall-internet-explorer-11.aspx
Don
(Please take a moment to "Vote as Helpful" and/or "Mark as Answer", where applicable.
This helps the community, keeps the forums tidy, and recognises useful contributions. Thanks!)

Is MDT must have for OS deployment in SCCM 2012

I know that existing MDT could be integrated to a new SCCM.
Is MDT must have for OS deployment in SCCM 2012 or SCCM has its own engine for OS deployment?
--- When you hit a wrong note its the next note that makes it good or bad. --- Miles Davis

Thanks for the answers.
one more question...
I am going to start SCCM deployment in test environment.
For OS deployment part:
if MDT is planned for integration with SCCM should I configure OS deployment in SCCM before adding MDT.
Or in this scenario OS deployment in SCCM could not be touched.
After all previous answers I understand that OS deployment module is part of SCCM installation and is independent from MDT.
--- When you hit a wrong note its the next note that makes it good or bad. --- Miles Davis

How to find who modified Software Update deployment in sccm 2012

Hi,
How to find who modified(Date & Time) software update deployment in SCCM 2012 ?

In the Console :
Monitoring / System Status / Status Message Query
Right Click : "Deployments Created, Modified, or Deleted" - Show Message and select your period.
You'll have your information there.
Benoit Lecours | Blog: System Center Dudes

Windows 8.1 clients are not detecting updates deployed to them through SCCM 2012 R2

Hello,
We are using SCCM 2012 R2 to deploy software updates.
On Windows 8.1 SCCM does not show certain updates as being needed and isn't deploying them to the clients even though Windows Update will show them as high importance. These same updates are being detected and deployed to Windows 8 clients successfully.
I believe that the update catalog that WSUS uses may have some incorrect detection rules for the following updates:
2917933
2913320
2913270
2913152
2909569
2904440
2904266
2903939
2899189
2893984
2893294
2892074
2916626
2898785
My automatic deployment rules include Windows 8.1 in the product category. I have even created a standalone rule for Windows 8.1 that builds a new package and the behavior is the same.
We only have a handful of Windows 8+ clients so this hasn't been a big issue but others may want to keep an eye out.

I am also running into this issue. After "checking online for updates" on one of my machines in office I found that there were 21 important updates for my 8.1 box. When I cross reference them in SCCM under All Software Updates, it appears these
8.1 updates are not listed. They are however listed for all other OS.
10 seconds after typing this, I went in to verify my WSUS -> Products and Classifications settings and come to find 8.1 and 2012 R2 weren't selected, even though it's an option in SCCM. Go figure! This wasn't the end though. After
running a Synchronization, my issue still wasn't resolved. Went back to check my settings and they again were changed back to having these OS unchecked. Finally, a solution! I found that in SCCM, under Administration tab, Site Configuration
> Sites > ABC - Mysitename, right click and scroll down to "Configure Site Components" > Software Update Point. This setting (although the same as is in WSUS) takes precedence, thus was rolling my settings back to the original configuration
in WSUS.
So long story short, even though my automatic deployment rules stated approve all windows 7/8/8.1 criticals/importants, 8.1 was getting skipped for the most part because my WSUS server wasn't syncing with Microsoft for all of the updates I required. I
did have a couple of updates that squeezed through because they were categorized as "Security Updates for Windows 8, 8.1".
Not sure if this is the solution you were looking for, but your thread got me started in the right direction, hopefully this response helps in the same way!
Thanks!

Window OS deployment through SCCM 2012 R2

Similar Messages

Maybe you are looking for