How to configure SNMP on all managed client using SCCM 2012 SP1

hi ,
do you know How to configure SNMP on all managed client using SCCM 2012 SP1?

As a side note, I made an interesting discovery last week: the SNMP Service is deprecated in Windows Server 2012. Why would you want to use SNMP on an actual Windows OS though? There are far better ways available to monitor Windows. I'm sure that lines
up with why they deprecated it.
Jason | http://blog.configmgrftw.com

Similar Messages

What best way to turn on all computers remotely using sccm 2012 sp 1

what best way to turn on all computers remotely using sccm 2012
and what the difference between wake on lan and out of band service point role

Hey!!! I am a 1E engineer and MVP... we started the power management movement with our very first software product, created around 12 or so years ago, called 1E WakeUp. The complete solution which manages power on (integrated with SCCM, or stand alone if
you are not an SCCM shop) and power off (under a tightly controlled process) is called
NightWatchman
Here is a
recent blog post I authored that was the last in a series documenting the entire wake-up process including how it integrates with SCCM or stood up standalone. It contains links to those earlier posts that explain our entire technology, so you will likely
want to read all of them in order for a full understanding of our technology. It works incredibly well, is the most mature solution in the industry, and is extremely simple to install with minimal resources.
If you have any questions, feel free to reach out to me privately
Ed Aldrich | 1E | Pre-Sales Solutions Engineer | ConfigManager MVP 2003-2012

For find activated lync client using SCCM 2012

Hi All,
In my current company we have in deployed lync client. But we are not sure how many clients are activated.
Is there any way to find which system got activated using SCCM 2012.
Please suggest and let me know any reference.
Thanks

I really don't know, but I would guess that a file or registry key would change once it's activated. Basically, I would simply compare an activated system with a not activated system and look for the difference. Once you've located that you can create
a compliance setting to see how many system are actived, or not.
My Blog: http://www.petervanderwoude.nl/
Follow me on twitter: pvanderwoude

DP Job queue manager not working- SCCM 2012 SP1

I am getting below error when trying to open DP job queue manager in sccm 2012 SP1
Please find the details information
see the end of this message for details on invoking
just-in-time (JIT) debugging instead of this dialog box.
************** Exception Text **************
Microsoft.ConfigurationManagement.ManagementProvider.WqlQueryEngine.WqlQueryException: The SMS Provider reported an error. ---> System.Management.ManagementException:
Invalid query
   at System.Management.ManagementException.ThrowWithExtendedInfo(ManagementStatus errorCode)
   at System.Management.ManagementObjectCollection.ManagementObjectEnumerator.MoveNext()
   at Microsoft.ConfigurationManagement.ManagementProvider.WqlQueryEngine.WqlQueryResultsObject.<GetEnumerator>d__0.MoveNext()
   --- End of inner exception stack trace ---
   at Microsoft.ConfigurationManagement.ManagementProvider.WqlQueryEngine.WqlQueryResultsObject.<GetEnumerator>d__0.MoveNext()
   at DPJobMgr.Form1.SummaryRefresh_Click_real(Object sender, EventArgs e)
   at DPJobMgr.Form1.SummaryRefresh_Click(Object sender, EventArgs e)
   at System.Windows.Forms.TabControl.OnSelectedIndexChanged(EventArgs e)
   at System.Windows.Forms.TabControl.WmSelChange()
   at System.Windows.Forms.TabControl.WndProc(Message&
m)
   at System.Windows.Forms.NativeWindow.Callback(IntPtr hWnd,
Int32 msg, IntPtr wparam, IntPtr lparam)
************** Loaded Assemblies **************
mscorlib
    Assembly Version: 4.0.0.0
    Win32 Version: 4.0.30319.1008 (RTMGDR.030319-1000)
    CodeBase: file:///C:/Windows/Microsoft.NET/Framework64/v4.0.30319/mscorlib.dll
DPJobMgr
    Assembly Version: 5.0.0.0
    Win32 Version: 5.0.7958.1000
    CodeBase: file:///C:/Program%20Files%20(x86)/ConfigMgr%202012%20Toolkit%20R2/ServerTools/DPJobMgr.exe
System.Windows.Forms
    Assembly Version: 4.0.0.0
    Win32 Version: 4.0.30319.1002 built by: RTMGDR
    CodeBase: file:///C:/Windows/Microsoft.Net/assembly/GAC_MSIL/System.Windows.Forms/v4.0_4.0.0.0__b77a5c561934e089/System.Windows.Forms.dll
System.Drawing
    Assembly Version: 4.0.0.0
    Win32 Version: 4.0.30319.1001 built by: RTMGDR
    CodeBase: file:///C:/Windows/Microsoft.Net/assembly/GAC_MSIL/System.Drawing/v4.0_4.0.0.0__b03f5f7f11d50a3a/System.Drawing.dll
System
    Assembly Version: 4.0.0.0
    Win32 Version: 4.0.30319.1001 built by: RTMGDR
    CodeBase: file:///C:/Windows/Microsoft.Net/assembly/GAC_MSIL/System/v4.0_4.0.0.0__b77a5c561934e089/System.dll
Microsoft.ConfigurationManagement.ManagementProvider
    Assembly Version: 5.0.0.0
    Win32 Version: 5.0.7958.1000
    CodeBase: file:///C:/Program%20Files%20(x86)/ConfigMgr%202012%20Toolkit%20R2/ServerTools/Microsoft.ConfigurationManagement.ManagementProvider.DLL
System.Core
    Assembly Version: 4.0.0.0
    Win32 Version: 4.0.30319.233 built by: RTMGDR
    CodeBase: file:///C:/Windows/Microsoft.Net/assembly/GAC_MSIL/System.Core/v4.0_4.0.0.0__b77a5c561934e089/System.Core.dll
System.Data.Linq
    Assembly Version: 4.0.0.0
    Win32 Version: 4.0.30319.1015
    CodeBase: file:///C:/Windows/Microsoft.Net/assembly/GAC_MSIL/System.Data.Linq/v4.0_4.0.0.0__b77a5c561934e089/System.Data.Linq.dll
System.Management
    Assembly Version: 4.0.0.0
    Win32 Version: 4.0.30319.1 (RTMRel.030319-0100)
    CodeBase: file:///C:/Windows/Microsoft.Net/assembly/GAC_MSIL/System.Management/v4.0_4.0.0.0__b03f5f7f11d50a3a/System.Management.dll
AdminUI.WqlQueryEngine
    Assembly Version: 5.0.0.0
    Win32 Version: 5.0.7958.1000
    CodeBase: file:///C:/Program%20Files%20(x86)/ConfigMgr%202012%20Toolkit%20R2/ServerTools/AdminUI.WqlQueryEngine.DLL
System.Configuration
    Assembly Version: 4.0.0.0
   Win32 Version: 4.0.30319.1015 (RTMGDR.030319-1000)
    CodeBase: file:///C:/Windows/Microsoft.Net/assembly/GAC_MSIL/System.Configuration/v4.0_4.0.0.0__b03f5f7f11d50a3a/System.Configuration.dll
System.Xml
    Assembly Version: 4.0.0.0
    Win32 Version: 4.0.30319.1015 built by: RTMGDR
    CodeBase: file:///C:/Windows/Microsoft.Net/assembly/GAC_MSIL/System.Xml/v4.0_4.0.0.0__b77a5c561934e089/System.Xml.dll
System.Data
    Assembly Version: 4.0.0.0
    Win32 Version: 4.0.30319.237 (RTMGDR.030319-2300)
    CodeBase: file:///C:/Windows/Microsoft.Net/assembly/GAC_64/System.Data/v4.0_4.0.0.0__b77a5c561934e089/System.Data.dll
************** JIT Debugging **************
To enable just-in-time (JIT) debugging, the .config file for this
application or computer (machine.config) must have the
jitDebugging value set in the system.windows.forms section.
The application must also be compiled with debugging
enabled.
For example:
<configuration>
    <system.windows.forms jitDebugging="true"
/>
</configuration>
When JIT debugging is enabled, any unhandled exception
will be sent to the JIT debugger registered on the computer
rather than be handled by this dialog box.

Hi,
That is as expected, the new tools require Configuration Manager 2012 R2 to work. From the download page of Configuration Manager 2012 R2 toolkit.
"Note: Items with an * are new in the R2 Toolkit and require Microsoft System Center 2012 R2 Configuration Manager for full functionality.
Server Based Tools
* DP Job Manager - A tool that helps troubleshoot and manage ongoing content distribution jobs to Configuration Manager distribution points.
* Collection Evaluation Viewer - A tool that assists in troubleshooting collection evaluation related issues by viewing collection evaluation details.
* Content Library Explorer - A tool that assists in troubleshooting issues with and viewing the contents of the content library"
So you need to upgrade to R2 before you can use the new tools.
Regards,
Jörgen
-- My System Center blog ccmexec.com -- Twitter
@ccmexec

How to Deploy exe application using SCCM 2012 SP1

Hi,
While creating deployment type wizard (for exe application deployment) , i am not able to see the "Windows Installer (native)" option in the drop down menu. Kindly refer snapshot. If i select "script installer" , deployment is not working.
I am taking it for adobe reader 9.1 exe application. Can anyone please suggest which option should i take.
Regards
Manish

I believe the thinking was that most people wrap their .exe in an .msi anyway, so that would have been way more common.
Really?
That seems bizarre to me. I guess, if this thinking occurred, it might have been based on the idea that lots of people are using Group Policy Software Installation (Intellimirror), since GPSI does a less-horrible job when you use MSI.
But, a lot of software I've seen, uses a setup.exe bootstrapper to launch one or more MSI's.
So, MSI wraps EXE wraps MSI would be the outcome of this thinking.
Which is why I chose the word... bizarre.
Don
(Please take a moment to "Vote as Helpful" and/or "Mark as Answer", where applicable.
This helps the community, keeps the forums tidy, and recognises useful contributions. Thanks!)

Lync 2013 x64 silent client deployment via SCCM 2012 SP1

Greetings everyone!
I ran into a problem with Lync 2013 x64 silent deployment.
I need to provide every workstation with Lync 2013 client, so i decided to use deployment via SCCM 2012 sp1.
I created 2 msp files with OCT, one based on x86 Office 2013 Proplus, and other based on x64 Office 2013 Proplus.
Added them as applications to sccm software library.
Deployment of Lync 2013 x86 application was a success with over than 80% compliance.
But all Lync 2013 x64 automatic installations finish with different errors.
I created special device collection for workstations with office 2010 x64 and 2013 x64, because i can't install other architecture products once it has x64 product installed.
My membership query-rules for this collection:
Office 2013 x64
select SMS_R_SYSTEM.ResourceID,SMS_R_SYSTEM.ResourceType,SMS_R_SYSTEM.Name,SMS_R_SYSTEM.SMSUniqueIdentifier,SMS_R_SYSTEM.ResourceDomainORWorkgroup,SMS_R_SYSTEM.Client from SMS_R_System inner join SMS_G_System_INSTALLED_SOFTWARE on SMS_G_System_INSTALLED_SOFTWARE.ResourceId
= SMS_R_System.ResourceId where UPPER(SMS_G_System_INSTALLED_SOFTWARE.SoftwareCode) = "{90150000-0011-0000-1000-0000000FF1CE}"
Office 2010 x64
select SMS_R_SYSTEM.ResourceID,SMS_R_SYSTEM.ResourceType,SMS_R_SYSTEM.Name,SMS_R_SYSTEM.SMSUniqueIdentifier,SMS_R_SYSTEM.ResourceDomainORWorkgroup,SMS_R_SYSTEM.Client from SMS_R_System inner join SMS_G_System_INSTALLED_SOFTWARE on SMS_G_System_INSTALLED_SOFTWARE.ResourceId
= SMS_R_System.ResourceId where UPPER(SMS_G_System_INSTALLED_SOFTWARE.SoftwareCode) = "{90140000-0011-0000-1000-0000000FF1CE}"
My application deployment type points to setup.exe in office 2013 x64 installation folder, where i created msp file in updates folder via OCT and edited config.xml file in proplus.ww folder.
So my installation program looks like this setup.exe /adminfile updates\1lync.msp /config proplus.ww\config.xml
The same configuration works with Lync 2013 x86 deployment, except other setup folders.
When i try running installation program setup.exe with /adminfile and /config parameters locally, it installs successfully without errors or warnings.
I'm trying to find out problem source, does anyone have ideas what I am doing wrong?
Also i'm trying to reduce office 2013 installation folder size, what subfolders are necessary for Office 2013 proplus installation (still installing only lync with common files and tools)? Because now 3.5 GB package is quite hard to distribute to sccm secondary
sites with deployment point.
Thanks in advance.

Hi,
Here are some tips and tricks for your reference.
Tips and Tricks: Deploying Lync 2013 client using SCCM 2012 | Lync 2013 Client Customization for SCCM 2012 Deployment Package
http://zahirshahblog.com/2014/01/08/tips-and-tricks-deploying-lync-2013-client-using-sccm-2012-lync-2013-client-customization-for-sccm-2012-deployment-package/
Note: Microsoft provides third-party contact information to help you find technical support. This contact information may change without notice. Microsoft does not guarantee the accuracy of this third-party contact information.
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

SCCM 2012 SP1 - How many servers do I need?

I'm planning a SCCM test environment using SCCM 2012 SP1 with the goal of using DCIP 3.1. DCIP 3.1 only supports up to SCCM 2012 SP1. I'm new to SCCM and I'm planning to follow Kevin Holman's ConfigMgr 2012 SP1 -QuickStart deployment Guide (Sorry, I can't
post links on the forum yet.)
I'm using a virtual environment to build this out so I can create more machines as needed.
In the guide two systems are used, DB3 and CM1 each with designated services. Could those services be safely installed on one machine instead of two? Why choose to split the SQL and Database Services, from the Primary Site Server, Management Server, and Web
Console Server?
Thank you!

For a lab and most small(ish) production sites you can get away with 1 server.
John Marcum | http://myitforum.com/myitforumwp/author/johnmarcum/

How to reduce configuration cache file Quota size located in ( C:\Windows\ccmcache ) for all client from SCCM 2012 server

How to reduce configuration cache file Quota size located in ( C:\Windows\ccmcache ) for all client from SCCM 2012 server
Thanks in Advance
NTRao

Hi,
There are numerous ways to change the cache size.
You could deploy a vbscript to a collection of the devices.
On Error Resume Next
Dim UIResManager
Dim Cache
Dim CacheSize
CacheSize=20000
Set UIResManager = createobject("UIResource.UIResourceMgr")
Set Cache=UIResManager.GetCacheInfo()
Cache.TotalSize=CacheSize
Or you could use a configuration item.
http://blog.coretech.dk/heh/configuration-items-and-baselines-using-scripts-powershell-example/
You can also use the right click tools by Now Micro on a collection, if all the servers are on this would be the easiest / quickest way.
http://www.nowmicro.com/recast/right-click-tools/
http://www.david-obrien.net/2013/02/how-to-configure-the-configmgr-client/
select SMS_R_SYSTEM.ResourceID, SMS_R_SYSTEM.ResourceType, SMS_R_SYSTEM.Name, SMS_R_SYSTEM.SMSUniqueIdentifier, SMS_R_SYSTEM.ResourceDomainORWorkgroup, SMS_R_SYSTEM.Client from SMS_R_System where SMS_R_System.OperatingSystemNameandVersion like '%6.2%'
https://msdn.microsoft.com/en-us/library/windows/desktop/ms724832%28v=vs.85%29.aspx?f=255&MSPPError=-2147217396

How to configure snmp on loopback interface, on vrf TEST, in ASR 9000 series

Hi there!
How to configure snmp v2, with community string, for ASR 9000 series, in interface loopback 1, that has vrf TEST
Regards!

oh that is somewhat vague, but let me try...
in order to enable snmp access to an interface in a vrf you need to enable MPP (management plane protection) in that vrf.
Something like this:
control-plane
management-plane
inband
interface Loopback100
allow all
if you have this and it doesn't work, a config snippet and some debugs (like debug snmp packet) will help to define what to do next.
regards
xander

How to convert Unmanaged SCEP clients to Managed in SCCM 2012 SP1

We recently started installing SCEP clients from the .exe and a preconfigured .xml file to client machines in a domain setting. This was done from a USB drive, going from machine to machine, with a .bat file.
This was a stop-gap until we were able to install and configure SCCM 2012 SP1.
PCs that already had the SCEP client (prior to SCCM coming into production) are showing up as unmanaged. PCs that have had SCCM install SCEP all are listed as managed.
I've searched, but have yet to find a definitive answer as to how get the manually installed SCEP clients to register as managed in SCCM.
AD Domain with WIN 2008 R2 DC, SQL 2012 Standard, SCCM 2012 SP1

Also, make sure the Endpoint Protection Point is installed properly on SCCM and the Client Setting for SCEP is enabled.
Juke Chou
TechNet Community Support

How to configure SNMP on SG300 using CLI

Hi,
Does anyone know how to configure SNMP on the Cisco SG300 switches? I have the SG300-10P. I am not fully familiar with the new command line interface on this device, it was easy on the IOS but finding it a nightmare on this one.
I put the following command in but it didnt work.
snmp-server view Interfaces interfaces included
snmp-server community ACB123 ro 10.x.x.x view default
I tried to follow the guidelines on the cisco website but thats all Web interface based, i can only access the switch remotely via CLI.
Thanks

Hi Rafik, here is a basic snmp v1/v2 configuration
snmp-server server
snmp-server community test1234 rw view DefaultSuper
This is basically wide open to anyone who knows the password. This should be enough to get you started then you can tweak additional options as you go. Give this a test, see if you can do what you're trying to do then modify this sample to work for your security needs.
-Tom
Please mark answered for helpful posts

How to configure snmp host in IPM?

Hi!!! I have CiscoWorks 2000 Rwan with IPM. I installed and configure IPM to send snmp traps when the treshold is excedeed. I can see on the graph that it is exceeded but I can not verify that it sending snmp traps.Where to view these traps and how to configure snmp reciver host?
Can I use CW2k syslog analyzer automated action to generate mail when get this trap?
THANKS FOR ANY HELP!!!!
Regards
Enes

Hi,
As you've discovered, IPM can help configure
these traps:
http://www.cisco.com/univercd/cc/td/doc/product/rtrmgmt/ipmcw2k/cipm25/ug/ipmfaq.htm#62205
But, you'll need to specify a dedicated NMS
server to receive these traps. The following
documentation should prove to be useful:
http://www.cisco.com/en/US/tech/tk648/tk362/technologies_tech_note09186a0080094aa5.shtml
http://www.cisco.com/en/US/tech/tk648/tk362/technologies_tech_note09186a0080094a05.shtml
You can use the appropriate "debug" command on
the router to confirm that traps are, in fact,
being sent.
The traps themselves are defined in the
CISCO-RTTMON-MIB.my and cannot interact
with the CW2000 syslog analyzer automated
action.
Thanks,
Roger

How to force site code discovery on all the clients, Migration SCCM 2007 to SCCM 2012

HI,
I migrated SCCM 2007 to SCCM 2012 SP1, but the clients does not update the New Site Code Automatically, if I click on Discovery option the client find the new site, but I need do this automatically because are too many clients.
This registry key does not exist on client computers.
HKLM\Software\Microsoft\SMS\MobileClient\GPRequestedSiteAssignmentCode
HKLM\Software\Microsoft\SMS\MobileClient\GPSiteAssignmentRetryInterval(Min)
HKLM\Software\Microsoft\SMS\MobileClient\GPSiteAssignmentRetryDuration(Hour)
Any Help?
Thanks.

Hello ICH-CR,
Thanks for writing to the SysCtr ConfigMgr forums.
I think there are multiple solutions to this issue and you can choose whatever fits best to your scenario.
1. While upgrading the clients from SCCM 2007 to 2012 you can assign the clients to your ConfigMgr 2012 site.
http://technet.microsoft.com/en-us/library/gg682060.aspx#BKMK_AutomaticAssignment
You just need to ensure that you have a boundary group and boundaries. More details on
http://technet.microsoft.com/en-us/library/13694ac5-8f3b-42a9-8040-b23f21c79637#BMBK_CreateBoundaryGrp
I would suggest the first method because if you create another child site, you shouldn't have to reassign the clients back again. If that is unlikely then use the following script which is method no 2
2.
http://gallery.technet.microsoft.com/scriptcenter/Change-sccm-configmgr-cf6e0327
This is a VBSCRIPT and can be ran from a network location using the PSEXC
3. Here is a smaller script
'Replace with your Site Code sSiteCode = "EnterNewSiteCode"
sMachine
= "."
set oCCMNamespace
= GetObject("winmgmts://"
& sMachine & "/root/ccm")
Set oInstance
= oCCMNamespace.Get("SMS_Client")
set oParams
= oInstance.Methods_("SetAssignedSite").inParameters.SpawnInstance_()
oParams.sSiteCode
= sSiteCode
oCCMNamespace.ExecMethod
"SMS_Client",
"SetAssignedSite",
oParams
You can use this script as a logon script .
Anurag
Microsoft Certified Professional| Microsoft Certified Technology Specialist (ConfigMgr)
This posting is provided 'AS IS' with no warranties or guarantees, and confers no rights.
My Blog
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread.

How to configure Oracle 10g Advanced Security to use SSL concurrently with

How to configure Oracle 10g Advanced Security to use SSL concurrently with database User names and passwords
In Oracle Advanced Security Documentation it is mentioned that i can use SSL concurrently with DB user names and passwords. But when i configure the client certificate on the client my DB connection is getting authenticated using the certificate, which out passing user id or password.
We want to connect to Oracle DB over SSL channel so that the data packets are not in clear text. Also we want the user to make a connection using user id and password.
Basically we want SSL with out authentication.
Need your expert advice

Read the documentation (I have given following links assuming you are running a 32 bit architecture)
Server installations:
http://www.oracle.com/pls/db102/to_toc?pathname=install.102%2Fb14316%2Ftoc.htm&remark=portal+%28Books%29
Client installations:
http://www.oracle.com/pls/db102/to_toc?pathname=install.102%2Fb14312%2Ftoc.htm&remark=portal+%28Books%29
You can find the required books (if not using 32 bit architecture) from
http://www.oracle.com/pls/db102/portal.portal_db?selected=3

How to recover deleted systems in "All Systems" collection in SCCM 2012

Hi Everyone,
how to recover deleted systems in "All Systems" collection in SCCM 2012 and also I had one system which is by accidentally deleted, I know the system name, but I cannot able to add the system manually to Device Collections, is
there any solution for this...
I had discovered many systems using discovery, I recovered some systems but not all the systems..
Please suggest...
saikumar CH

just a follow up on Torstens reply. You will see the discovery records show up in the console without having the client installed. That will be corrected when clients perform a hardware inventory re-sync. It all happens automatically, no panic and don't
reinstall the clients.
Kent Agerlund | My blogs: blog.coretech.dk/kea and
SCUG.dk/ | Twitter:
@Agerlund | Linkedin: Kent Agerlund |
Mastering ConfigMgr 2012 The Fundamentals

How to configure SNMP on all managed client using SCCM 2012 SP1

Similar Messages

Maybe you are looking for