Windows 7 - TCP Parameter TcpMaxConnectRetransmissions and TcpInitialRTT

(this is a dummy post, for an issue which has been resolved under the partner area after i raised a break fix ticket with Microsoft, but not available to the wider audience)
We have a redundant NIC situation where we want the swap on failure to be fast, i.e. we want the default TcpMaxConnectRetransmissions to be 0 or 1, not 2. The resulting default no connection time is 21s
Research has shown posts like
http://go4answers.webhost4life.com/Example/window-registy-14268.aspx which implies this has been dropped in Windows 7 and you can no longer control a range of settings. Also see
http://blogs.technet.com/b/netro/archive/2010/08/30/tcp-ip-stack-hardening-in-operating-systems-starting-with-windows-vista.aspx
There is also TcpInitialRTT but neither work. However their is a KB
http://support.microsoft.com/kb/170359 which imply they should work. Someone is tell porkies ?
>> Is this true, we can't adjust the timeout for a connection in Windows 7, or is there still a backdoor to this functionality ?
Thanks

Hi,
I’m glad to hear your issue has been resolved. Hope your experience will help other community members facing similar problems.
Regards,
Leo
Huang
TechNet Subscriber Support
If you are
TechNet Subscription user and have any feedback on our support quality, please send your feedback
here.
Leo Huang
TechNet Community Support

Similar Messages

How to hide the window of Runtime Parameter Form?

I have a form and I call a report from this form.I have passed some parameters to this report.Before the browser of reports appear the window of Runtime Parameter Form.I want to hide this window of Runtime Parameter Form but I don't know how.
Please help me!

When calling the report, set the property PARAMFORM to NO. IF you using parameter list to pass values to report you can do as follows:
ADD_PARAMETER(pl_id,'PARAMFORM',TEXT_PARAMETER,'NO');

Need help with parameter fields and report selection.

Hi all:
I hope some one can help me with the problem I am having with my parameter field and record selection.
First, can anyone explain to me why my parameter field CustStart, which is dynamic and is based on the field Customer in the table CustMaster. There are over 1800 records in the CustMaster table but the drop down list only shows maybe about half of them and there is no way to scroll down to the last customer record. What am I doing wrong?
Second, is there any way to base a parameter field on a formula field on my report? On my report I have created a field Cust that is the customer name and number joined together in one field. I would very much llike to use this formula in my record selection and in my parameter field. Can it be done?
All help is greatly appreciated
Thanks,
FatMan

Hi,
You can use the following for changin increasing the LOV.
Crystal Reports XI BusinessObjects Enterprise XI
For performance reasons, in Crystal Reports XI Release 1 and Release 2 the maximum number of values that are returned for a list of values is set to 1000. If you have a cascading List of Values (for example Country > Region > City), the lowest level (in this case City) will only display a maximum of 1000 values. This means that the higher-level prompts may display far fewer values than you expect. The list of values provides the data for the dynamic parameter list.
How can you modify the maximum number of values available in a dynamic parameter list?
Resolution
To increase the maximum number of values available in a dynamic parameter list, you must add a registry key.
CAUTION     The following resolution involves editing the registry. Using the Registry Editor incorrectly can cause serious problems that may require you to reinstall the Microsoft Windows operating system. Use the Registry Editor at your own risk. For information on how to edit the registry key, view the 'Changing Keys and Values' online Help topic in the Registry Editor (Regedit.exe).
It is strongly recommended that you make a backup copy of the registry files (System.dat and User.dat on Win9x computers) before you edit the registry.
Crystal Reports XI Release 1
1.     Create a registry key HKEY_LOCAL_MACHINE\SOFTWARE\Business Objects\Suite 11.0\Crystal Reports\DatabaseOptions\LOV.
NOTE     Alternatively, you can create the registry key HKEY_CURRENT_USER\SOFTWARE\Business Objects\Suite 11.0\Crystal Reports\DatabaseOptions\LOV and that key will override the settings of the HKEY_LOCAL_MACHINE\SOFTWARE\Business Objects\Suite 11.0\Crystal Reports\DatabaseOptions\LOV key.
2.     Add a string value "MaxRowsetRecords" and set the value to the maximum number of values that you desire for your report. For example, a value of 2000 will return up to 2000 values in the lowest level of a cascading parameter. NOTE: The value 0 (Unlimited) will not work with BusinessObjects Enterprise XI or Crystal Reports Server XI, you must specify another value.
NOTE     The higher the number of values is, the longer it will take the Enter Values dialog box to populate with values.
3.      After making changes to the registry, restart the affected service or application as required.
Crystal Reports XI Release 2
1.     Create a registry key HKEY_LOCAL_MACHINE\SOFTWARE\Business Objects\Suite 11.5\Crystal Reports\DatabaseOptions\LOV.
NOTE     Alternatively, you can create the registry key HKEY_CURRENT_USER\SOFTWARE\Business Objects\Suite 11.5\Crystal Reports\DatabaseOptions\LOV and that key will override the settings of the HKEY_LOCAL_MACHINE\SOFTWARE\Business Objects\Suite 11.5\Crystal Reports\DatabaseOptions\LOV key.
2.     Add a string value "MaxRowsetRecords" and set the value to the maximum number of values that you desire for your report. For example, a value of 2000 will return up to 2000 values in the lowest level of a cascading parameter.
NOTE     The value 0 (Unlimited) will not work with BusinessObjects Enterprise XI or Crystal Reports Server XI, you must specify another value.
3.     After making changes to the registry, restart the affected service or application as required.
I hope this helps you.
Regards,
Prashant

Window title -using parameter

i am wondering how i can change the window title using the parameters that i pass to this particular form.
I would like for my window title be something like:
Edit Site: :parameter.fac for :parameter.date
~Vannette

It is not clear on which Operating system you are running your forms. If it is Windows then if you are trying to set 'TITLE' for the main window (In windows forms run inside MDI Application Window)
Then use
Set_Window_Property(FORMS_MDI_WINDOW,TITLE, Edit Site: ||:parameter.fac|| for ||:parameter.date );
And it should work.

Windows 2012 R2 License Server and Firewall Ports

Hi,
I have setup a Windows Server 2012 R2 as a RDS license server, and I have installed the necessary CALS. This server is on the domain and in AD. We have a separate VLAN that is isolated but can join domain for authentication purposes only,
but it is behind a firewall. What ports do I need to open on the firewall in order for the Windows 2012 Servers to aquire a license from the 2012 R2 server in the domain?
Thanks,
Mike

Hi Mike,
Thank you for posting in Windows Server Forum.
Remote Desktop License Server
o RD License Server Port RPC
o TCP 443: Communication over the internet to the Microsoft Clearing House
o TCP 5985: WMI and PowerShell Remoting for administration
o From a proxy standpoint, the regkey HKLM\Software\Microsoft\TermServLicensing\lrwiz\Params shows the Microsoft service that the RD LS communicates with. e.g. clearinghouse.one.microsoft.com
More information.
Which ports are used by a RDS 2012 deployment?
http://social.technet.microsoft.com/wiki/contents/articles/16164.which-ports-are-used-by-a-rds-2012-deployment.aspx
Hope it helps!
Thanks.
Dharmesh Solanki

Sockets, multicast/broadcast, UDP, TCP, SO_REUSEADDR, SO_REUSEPORT and SO_EXCLUSIVEADDRUSE

EDIT: the topic was moved to https://social.msdn.microsoft.com/Forums/vstudio/en-US/6b0fbcbc-1139-4d7a-a62a-a5b16a6e0229/sockets-multicastbroadcast-udp-tcp-soreuseaddr-soreuseport-and-soexclusiveaddruse?forum=wcf .
Hello,
in the project Dao (https://github.com/daokoder/dao) we got stuck upon a problem with a wrapper interface for bind(), which should be multiplatform (work on all Windows versions from XP higher and also on BSDs and also other POSIX systems) and offer the
following two options:
1) A safe bind of one socket, one address (specific or wildcard) and one port such that no other process (disregarding the user the process runs under and disregarding user privileges) could be successful with a call to bind() on the same socket with the
same address and the same port.
2) A bind with allowing multicast/broadcast, reuse of address, port and all these disregarding the state of the socket (e.g. TIME_WAIT) and disregarding the type of connection (UDP, TCP). In other words, the behavior should be the same a the behavior of
BSD sockets in all cases and under all conditions.
The main differences between BSD and Windows are conveniently described on http://stackoverflow.com/questions/14388706/socket-options-so-reuseaddr-and-so-reuseport-how-do-they-differ-do-they-mean-t . According to that, one would say that a solution:
1) For BSD "0" and for Windows "SO_EXCLUSIVEADDRUSE"
2) For BSD "SO_REUSEPORT | SO_REUSEADDR" and for Windows "SO_REUSEADDR"
is enough. But it's not true. For example due to Enhanced Socket Security and their behavior described in the table http://msdn.microsoft.com/en-us/library/windows/desktop/ms740621(v=vs.85).aspx (after first call to bind() with wildcard address and SO_REUSEADDR
set, a second call to bind() with non-wildcard address and SO_REUSEADDR set will fail with error WSAEACCES).
A solution might be to gather all the needed information (like user id, if there are any processes using that particular socket and if a call to connect() was already issued in case of TCP) and according to this information use the right mix of options SO_REUSEADDR,
SO_EXCLUSIVEADDRUSE and others if needed. We didn't find though enough documentation about where to get all the needed information. Note that this solution would need an atomic query on socket (for all the information) in conjunction with a call to bind().
Another solution could be to call bind() with different flags and decide upon the return error codes. This is though a nasty hack we would like to avoid.
The question for you is, if you happen to know about any better solution than the ones mentioned above. There is a public discussion about this problem starting with comment https://github.com/daokoder/dao/issues/243#issuecomment-60434078 .
Thank you in advance!

Hi dao_lang_rulezz,
Thanks for posting in the TechNet Forum.
As my point of viewer, this requirement is related to program developing issue.
This forum is related to Windows 8.1 Client.
To receive better support, it is recommend to ask in corresponding developing forum.
Best regards，
Fangzhou CHEN
Fangzhou CHEN
TechNet Community Support

Lenovo Yoga 2 13, Kali Linux 1.0.7, Ubuntu 14.04, Windows 8.1 install, config, and wifi fix.

Lenovo Yoga 2 13, Kali Linux 1.0.7, Ubuntu 14.04, Windows 8.1 install, config, and wifi fix.
I wanted to share an experience with everyone I hope will help others avoid what I have gone through the past 3 days. I bought a Yoga 11s that I loved but had some issues with the wireless, Lenovo being awesome replaced it with a Yoga 2 13. I love this laptop but ran into some issues with Linux install/wireless, which I wanted to show how to resolve in one place. Hopefully this will help someone else get through this quicker
I am going to try and write this for someone with little Linux experience, if I miss the mark please let me know and I will clarify the best I can.
For work I need Windows 8.1 and Kali Linux, while for home I prefer Ubuntu.
My Yoga 2 13:
I5 1.6 ghz
8 GB ram
256 GB SSD
ORANGE!
My requirements:
I need Windows
I need Kali Linux (livecd, even with persistent mode was not an option as it would not save the wireless fix or system updates) – I would also like this on a USB drive and not the internal SSD
I would like Ubuntu
Needed to do this:
1. 2 USB thumb drives (at least 8gb in size each) I used 2 Leef Supra 32GB drives. They are my favorite right now and are only about $27 at amazon.
2. Phone that can USB Tether or a USB Ethernet card (External USB wireless will show as "Hardware Locked"). Again you can pick one up for sub $10 if you need the USB Ethernet route. I used my Galaxy S5, you will need to download 200-300 mb of items through this so make sure you have the data if you go that route.
3. You may be able to get a USB wifi card to work if you do the following after boot. This only worked once for me.
                a.Type ‘sudo rmmod iwlmvm’
b.Type ‘sudo rmmod iwlwifi’
4. ISOs of Ubuntu and Kali Linux (I used Ubuntu 14.04 and Kali Linux 1.0.7)
5. Software to unzip the ISOs. I recommend 7-ZIP and will be referencing this in this guide.
6. I will include the EFI boot files and the WiFi fix files if I can attach. Otherwise I will provide a link to them.
   Link: https://www.dropbox.com/s/puxnnoft3gn2b6l/WiFiFix.zip
Recommended (these are just in case you corrupt something making your system not see any OS
1. I would call Lenovo beforehand and get a set of recover disks (this will take 2-3 days)
2. In the meantime a USB Windows 8.1 or 8 ISO (the repair feature may save you)
*Note: At many points in this guide I detail steps and commands. Please double check that you understand the step before proceeding. There are multiple points where a mistyped command or clicking the wrong option will cause your entire system to fail and you will need to reformat the entire drive and start over. This also will make One Touch recovery not work. Proceed with caution.*
I did not need to disable ‘secure boot’ to do this, but keep in mind that you may need to.
Steps:
First let’s go through the installs, and then we will go through grub config and wireless fix
1. In Windows scroll to computer and right click, select manage.
2. Go to “Disk Management”
3. Select the main HDD (notice Lenovo puts a stupid number of partitions on here)
a. I deleted the D: drive on here, if you do this make sure to copy the drives over to your main C: drive. You will want to run each of the installers and repair the drivers after.
4. I used the space from the D: drive and pulled a little more creating a 50 GB partition for Ubuntu and my swap file
a. You can also add more space by right clicking your C drive and selecting shrink
b. Do not format the partitioned data as this will make identifying it later much easier.
5. Open a command line
                a. Swipe from the right of the screen and select search
                b. Type ‘cmd’
                c. right click and select ‘run as admin’
6. For Ubuntu: Type ‘diskpart’ into the command line
                a. type ‘list disk’
i. You should see 2-3 disks depending on if you have one or both usb drives in the laptop at the time. I would suggest only doing 1 at a time so you don’t lose track.
                b. type ‘select disk $’ (Replace the $ with the number of the drive)
c. ***** Before proceeding make sure you have the correct drive selected or you can ruin your Windows install and Lenovo one touch recovery will not fix it since we have changed the partitions *****
d. type ‘clean’
e. type ‘create partition primary’
f. type ‘active’
g. type ‘format fs=fat32 quick’
h. type ‘assign’
i. type ‘exit’
6. For Kali Linux: Type ‘diskpart’ into the command line
                a. type ‘list disk’
i. You should see 2-3 disks depending on if you have one or both usb drives in the laptop at the time. I would suggest only doing 1 at a time so you don’t lose track.
                b. type ‘select disk $’ (Replace the $ with the number of the drive)
c. ***** Before proceeding make sure you have the correct drive selected or you can ruin your Windows install and Lenovo one touch recovery will not fix it since we have changed the partitions *****
d. type ‘clean’
e. type ‘create partition primary size= 3272
f. type ‘active’
g. type ‘format fs=fat32 quick’
h. type ‘assign’
i. type ‘exit’
j. By doing this we can maintain a portion of this drive as the install CD and still have linux install/ liveCD if we need to run it on another machine.
7. At this point the drive is ready to have the contents of the ISO copied over.
8. Right click the ISO and select 7-zip then ‘zip to /’ This should unzip the ISO to the location of the ISO into a folder named exactly the same as the ISO.
9. Once this is done for Ubuntu ISO it is done
10. Kali requires a little bit more to be ready
                a. Kali will need some files added for EFI boot. --$--
                               i. Thanks to: https://forums.kali.org/showthread.php?271-How-to-EFI-install-Kali-Linux
                               ii. EFI files are located within the wifi fix folder https://www.dropbox.com/s/puxnnoft3gn2b6l/WiFiFix.zip
11. Now let’s start with Ubuntu
Ubuntu install
1.     Place USB drive into the laptop and press the “Lenovo boot” button next to the power button
2.     Select ‘Boot Menu’
3.     Select ‘EFI USB Device (Name of drive)’ Mine stated Leef Supra
4.     Select ‘install Ubuntu’
5.     Go through the Ubuntu install until you get to select the install drive
6.     Once you get to the install portion it will ask you to select from one of 4 options. Select ‘Manually select partition’
7.     Select the “Free Space” where we opened up some of the drive
8.     You will need to create 2 partitions, I usually create the swap partition at the end of the drive
a.     First I create the swap
                                          i.    Set at the end of the drive
                                         ii.    Set size to 1024 mb
                                        iii.    Set type to ‘swap’
b.     Second create the ext 4 partition
                                          i.    Set to beginning of drive
                                         ii.    Set to remainder of the space
                                        iii.    Set type to ext4
                                        iv.    Set mount point to /
9.     Finish the install and boot into Ubuntu
10.   You will notice that your wireless is ‘disabled by hardware’ This is fine for the time being and we will worry about this after the kali install. If we fix it now for some reason after installing kali we get the error again and would just need to fix it again.
Kali Linux install
1.     Place USB drive into the laptop and press the “Lenovo boot” button next to the power button
2.     Select ‘Boot Menu’
3.     Select ‘EFI USB Device (Name of drive)’ Mine stated Leef Supra
4.     From the grub menu select ‘install kali linux’ both graphical and text work. I much prefer text install
5.     You will get a few errors through the install but that is fine
6.     The first we see is about network hardware and ‘load missing firmware from removable media?’ – Select ‘no’
7.     Then select no ethernet card
8.     It will have you name your machine then it will ask you for the root password
a.     If you want to just use root *not recommended* place the password here
b.     If you wish to use a non-root account then leave these blank and it will ask you for a name, username, and password of the new machine *Very Recommended* - this will also add this user to the sudoers file
9.     It will then ask you to ‘partition disks’
10.   Select manual
11.   Now here is where it can get a little confusing so read twice click once
12.   Select the USB drive from this list
13.   Mine shows up under (sdb) – Leef Supra
a.     It could be sdc, sdd, sde, etc… depending on how many drives you have plugged in.
14.   You should see one primary drive that is 3gb or so that is formatted as FAT32. – DO NOT TOUCH THIS PARTITION!
15.   You should see the remainder of this drive as ‘FREE SPACE’ select that
16.   Create a partition at the end at size 1024mb and swap
17.   Then create another one for the remainder of the drive and set it to ext4 with mountpoint of /
18.   Continue through the install after you should see an error warning you that ‘you may not be able to boot’ that is fine, select continue
19.   Then select from the menu of all the options ‘continue without bootloader’
20.   It should finish up then reboot on its own.

First setup/boot/fix grub
1.     You should be able to boot up into GRUB2 menu now.
2.     You may not see kali linux in this menu (make sure you have your towel and don’t panic!)
3.     Boot into Ubuntu
4.     Once you log in you should see that you still cannot use wireless due to being locked by hardware
5.     This is expected
6.     Let’s fix grub then we will come back to fixing wireless
7.     Plug in your device to connect to the internet (USB Tethering or USB Ethernet)
8.     Once you verify that you now have an internet connection run the following from terminal
a.     ‘sudo add-apt-repository ppa:danielrichter2007/grub-customizer’
b.     ‘sudo apt-get update’
c.     ‘sudo apt-get install grub-customizer’
9.     You can also edit the grub.cfg manually if you know what you are doing… I did not
10.   Open grub customizer
11.   It should auto populate and you should see ‘debian (kali linux)’ somewhere in the list
12.   It should be mounted to /dev/sdb2 or /dev/sdc2 depending on how many devices you have
13.   At this point go ahead and save
14.   Reboot and test that you can get into each OS
15.   This is where my inexperience got me. I spent 2 of my days so I am including this error: If when you boot into Kali you get an error somewhere that says ‘/bin/sh: can’t access tty: job control turned off’ look above it for an error that looks similar to ‘ALERT! /dev/sdc2 does not exist. Dropping to a shell!!’
a.     That error is due to the mount point being incorrect in grub, reboot and from within grub highlight the kali boot. Press ‘e’ then towards the bottom you should see ‘root=/dev/sdc2’ change this to ‘root=/dev/sdb2’ again the number doesn’t matter just make sure it stays the same.
b.     Press F10
c.     If this boots fine then you will need to go back and fix the grub.cfg or load into Ubuntu and open grub customizer again, it should fix this
16.   Now you have 3 working OS on the machine with one being on a USB! Congrats!
17.   You can remove the USB with no worry of screwing up your install, but you will not be able to boot into Kali Linux until you replace it. I would suggest only removing it and replacing it while the machine is powered off, but that’s just me.
Fix Wireless
Now is the time to do what probably ¾ of you came here for. FIX THE DANG WIRELESS. This is a huge problem from Lenovo’s side that I hope they realize how important Linux is and will fix. I won’t hold my breath though.
Log into Ubuntu : This is well documented in the following forum post on page 3 by user Haohe:
http://ubuntuforums.org/showthread.php?t=2215044&page=3
His has you download quite a large file, mine should be much smaller.
https://www.dropbox.com/s/puxnnoft3gn2b6l/WiFiFix.zip
1.     Download the attached package with the fix.
2.     Connect your USB internet device (tether or ethernet)
3.     Place the packages somewhere easy to access, in this example I will place them under ~/Desktop/WiFiFix
4.     Type ‘cd ~/Desktop/WiFiFix/’
5.     Now we need to prep the tools we need.
6.     Type ‘sudo apt-get update’ – we did this before, but you know, just in case
7.     Type ‘sudo apt-get install linux-headers-`uname –r`’   Note around uname-r they are the ` symbol not the ‘ this is located just above the tab on the same key as ~.
8.     Type ‘make’
9.     Type ‘sudo cp /lib/modules/3.13.0-24-generic/kernel/drivers/platform/x86/ideapad-laptop.ko ~/ideapad-laptop.ko.backup’
10.   Type ‘sudo cp ~/Desktop/WiFiFix/ideapad-laptop.ko /lib/modules/3.13.0-24-generic/kernel/drivers/platform/x86/’
11.   Type ‘sudo modprobe -r ideapad-laptop’
12.   Type ‘sudo modprobe ideapad-laptop’
13.   Type ‘sudo rfkill unblock all’
14.   Type ‘sudo modprobe -r ideapad-laptop’
15.   Type ‘sudo mv ~/ideapad-laptop.ko.backup /lib/modules/3.13.0-24-generic/kernel/drivers/platform/x86/ideapad-laptop.ko’
16.   Next we need to blacklist the ideapad module
17.   Type ‘sudo echo 'blacklist ideapad-laptop' > /etc/modprobe.d/blacklist-ideapad.conf’
a.     The first time I tried this it wouldn’t work. So I did the following
b.     ‘sudo touch /etc/modprobe.d/blacklist-ideapad.conf’
c.     ‘sudo vim /etc/modprobe.d/blacklist-ideapad.conf’
d.     Enter     blacklist ideapad-laptop
e.     Exit and save
18.   Reboot your Yoga 2 13
19.   Boot into kali and see if you have wireless, if you do then you are done. If not we will need to repeat this process with one small little change.
Kali Wifi Fix
1.     Copy the sources.list from the package provided
2.     Replace /etc/apt/sources.list with the included
3.     Some of the file path changes but the process remains the same from here.
Congratulations you now have 3 OSes one portable to other machines and working wifi!
Thank you
SirGed

Windows XP Pro (32-bit) and Vista Ultimate (64-bit) on the same Mac Pro HD?

Has anyone been able to install both Windows XP Pro (32-bit) and Windows Vista Ultimate (64-bit) on the same dedicated Windows hard drive? I have four HD in my Mac Pro, and one of them is dedicated for Windows (and bootable via Boot Camp). I found the following technical articles about installing Windows XP & Vista on the same hard drive (using two separate partitions) using a VMWare machine as the test system:
http://apcmag.com/howto_dual_boot_vista_and_xp_with_vista_installed_first__the_stepbystepguide.htm
http://apcmag.com/howto_dualboot_vista_with_xp__stepbystep_guide_withscreenshots.htm
Has anyone successfully installed Windows XP (32-bit) and Vista 64-bit) on the same NTFS partition?
I already have Windows XP Pro (32-bit) SP3 installed on my single NTFS hard drive. I am looking for the best way to add the Vista 64-bit installation on the same hard drive.
Any thoughts and advise are appreciated.

Windows has its own list of boot OSs, and default, from msconfig. It will sit and wait for xx-seconds on startup in Windows if you want to boot from an alternate.
As to whether Apple's OS Switcher (aka startup disk bootcamp control panel or tray icon) sees both, I had Windows Home Premium and Ultimate 64, and pretty sure OS X saw both. That was pre-Leopard and before there were 64-bit Apple drivers.
I can't think of any scenerio of wanting to mix 32-bit and 64-bit on the same paritition, you realize you can't install the one over the other and must do a clean install.
When I added a partition out of main partition (I wanted to put search index and page file on their own partition) those partitions aren't seen - are hidden - to Leopard.

Using Photoshop CC 2014 on a Windows Tablet without a keyboard and mouse

Using Photoshop CC 2014 on a Windows Tablet without a keyboard and mouse can be quite a challenge. Even if you use the experimental 2x UI. You can not use your fingers or to quickly change tools and change settings. You have no shortcut without popping up Windows touch keyboard or leave it up taking a great deal of screen space. If you're using the 2x UI Photoshop uses the screen at half resolution so it displays 1/4 the amount of pixels it could.
Fortunately I found a little touchkey utility on the web the lets you design your own touch keyboards. The can be transparent and you can even paint under them as long as you start the stroke outside the keyboard area. The keyboards can be toggles on and off so you can actually use Photoshop. The utility is small and requires not installation can be run form anywhere. I purchased a Surface Pro 3 a week ago. Its a full fledge PC. Through the home group I can access all machines in my house and using network shares I can access all files on my machines and the network drive on my router, I can print on my Epson 4800 printer. I can show slideshow on my HDTV via Bluetooth using a Microsoft wireless display adapter. I can plug in my Wacom Intuos Pro wireless receiver into the USB 3 port and use my Wacom tablet. Have a very touchy machine. Touch on the keyboard touch pad touch on the Display display and on the Wacom tablet. Could have touch on a mouse but I prefer the Microsoft comfort bluetooth mouse that has six buttons and a four way wheel.
As a tablet its under two pounds. Its quite impressive cost why mor the an iPad but worth the cost to me for with windows I can get at the file system. If you have a Surface Pro 3 you should check out "Touchkey" its handy.

Do a screen screen capture and post it here so we can see what you stating about a white layout...

I have a Windows 2003 Server 64-Bit, and when I upgraded to Firefox 4.0.1 now it won't run, it keeps saying to restart to complete the installation, but I've restarted theserver 4 times, and I still can't use it.

I have a Windows 2003 Server 64-Bit, and when I upgraded to Firefox 4.0.1 now it won't run, it keeps saying to restart the computer to complete the installation, but I've restarted theserver 4 times, and I still can't use it.

I ended up putting it in DFU mode. It's kinda hard to tell it was in DFU mode because nothing showed on the screen, it was just black, but the sounds from the computer helped to tell me it was connected.
Itunes still didn't recognize the device for whatever reason.
So I used redsn0w. I don't know if I can say that on these forums, but considering itunes was worthless at this point I am going to give credit where credit is due.
Now I am giving itunes a second chance to upgrade to 5.1, if it doesn't work, well, back to redsnow and maybe I will even jailbreak it this time rather than just using the fecovery fix found under extras.

Having a problem with wireless connection. On my Windows XP 32 bit system and a 6510 printer, initi

On my Dell Latitude D620, Windows XP 32 bit system and my 6510 printer wireless connection (Linksys EA4500) , everything works fine after the computer is booted. After a period of time (usually overnight), I lose connection to the printer (the scanner icon with a red x is shown on my Windows task bar and I can't print. Ran Windows Fix and the HP fix programs. The only thing that solves it is to reboot the computer. A second symptom is that my IE8 stops connecting to the internet at the same time (gives a 'waiting for' response that never changes). Firefox still connects OK when this is happening. So I suspect the problem isn't with the printer, but with my Windows set up. It is a fresh XP SP3 install (hard drive crashed, but it happened before also). I reset IE, checked my proxy, no malware, happens with or without firewalls and security programs.
Hoping that someone else has run into this problem. Been all over Google, and the IE doesn't work / Firefox works is fairly common, but none of the fixes helps.

If you want you can reload Firefox 4.0 or the last "old" version is 3.6.16 and is available here:
http://www.mozilla.com/en-US/firefox/all-older.html
Just reinstall your choice of FF. The bookmarks are in a different directory and are NOT overwritten. Some of the Add-ons that worked in 3.6 DO NOT work with 4.0, pay attention and head any warnings when you start 4.0.
I had to disable extensions: Flashblock and WOT
Firefox SafeMode? - A troubleshooting mode.
1.You can open the Firefox 4.0 SafeMode by holding the Shft key when you use the Firefox desktop or Start menu shortcut.
To exit the Firefox Safe Mode, just close Firefox and wait a few seconds before using the Firefox shortcut to open it again.
For more help, see this: http://support.mozilla.com/en-US/kb/troubleshooting+extensions+and+themes
Hope this helps you out.
Feedback is appreciated especially if this helps you out.

I have iTunes 11.4 and Windows 7. Using iTunes on Windows 7, I get message that iTunes has stopped working and Windows will close the program and notify me if a solution is available. Same message for last two days. Anyone else getting this?

I have iPad 2, iPhone 5s, both with iOS 7.1.2. I use PC with Windows 7 and hard wire internet service and iTunes to update apple products; no wi-fi. I updated iTunes to v11.4 on 09/11/14. I ran Windows update on 09/10/14. I did not try to open iTunes on my PC until yesterday 09/16/14. I got the message: "iTunes has stopped working. A problem caused the program to stop working correctly. Windows will close the program and notify you if a solution is available." I got the same message today. Does anyone know if this is a Windows problem and if a solution is coming or an iTunes problem? I can get iTunes on iPad and iPhone. All other programs PC are working correctly. I use Norton Internet Service on PC. I ran virus scans and repair/reinstall iTunes yesterday on PC.

Hello notime4,
The article linked below details some useful troubleshooting steps that can help stabilize iTunes on your computer.
iTunes for Windows Vista, Windows 7, or Windows 8: Fix unexpected quits or launch issues
http://support.apple.com/kb/TS1717
Cheers,
Allen

I am trying to resize disk space on parallels 6 for windows XP under configure Hardrive and I get the error resizing failed unable to resize last volume the file system of this volume might be damaged or not supported? I am on a Mac using Parallels 6

I have been trying to increase my disk space for windows xp on my Imac and I am running parallels 6. before opening windows I go into configure in parallels and open the hard drive and try to move the allotted disk space from 32 gig to 64 or any other increased gig and then apply and I get the error message: resizing failed unable to resize last volume. The file system of this volume might be damaged or not supported. How do I increase the size?? I just also did a disk repair utility with Apple on the Apple side of my IMAC. Please Help!! I had uninstalled SQL server on the windows side and needed to uncompress files to install this and then I ran short on disk space.

This sounds to me that your Parallels XP file system is corrupted and not the OSX file system.
Have you checked the XP file system while running the Parallels XP yet ?
However, it would be better to ask such question in the Parallels Forum http://forum.parallels.com/
Stefan

Trying to install iTunes 12.1 for Windows 8.1 (64-bit) and get Itunes error HRESULT: 0x800736B3

Hello,
I am Trying to install iTunes 12.1 for Windows 8.1 (64-bit) and I get an Itunes window with an error that says:
An error occurred during the installation of assembly 'Microsoft.VC80.CRT,type="win32",version'8.0.50727.6195",publicKeyToken="1fc8b3 b9a1e18e3b"processorArchitecture="amd64". Please refer to help and Support for more information.HRESULT: 0x800736B3
I already:
- Uninstalled all old Itunes versions.
- Tried a clean reboot to install the new version,
- Installed the security update’ Microsoft Visual C++ 2005 Service Pack 1 Redistributable Package ATL Security Update’
But I still get the same error.
Can someone help?
Thanks!

For general advice see Troubleshooting issues with iTunes for Windows updates.
The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down the page in case one of them applies.
Your library should be unaffected by these steps but there is backup and recovery advice elsewhere in the user tip.
If you still have trouble you might consider installing the alternate version iTunes 12.1 for Windows (64-bit — for older video cards) where you can download a 64-bit installer for the 32-bit version of iTunes that works with older video cards. This version may also be useful for anyone who is unable to get the 64-bit version of Apple Application Support to install when using the itunes6464setup file, or has trouble with playback of certain video files despite having QuickTime installed.
tt2

I am trying to move a pdf file onto my iPad2, and it says that the device is not connected or has stopped working. But Windows 7 recognizes the device and I can see my pictures. Same thing happens when I try to put music onto the iPad.

I am trying to move a pdf file onto my iPad2, and it says that the device is not connected or has stopped working. But Windows 7 recognizes the device and I can see my pictures. Same thing happens when I try to put music onto the iPad.

When in iTunes on the computer,my our ipadmshould show under devices.
Click on your ipadmunder devices then go to music at top center of the iTunes window, check what you want to sync for music. You need to set it to a folder if I remember which would have your music in it you want synced.
Same with PDF files.....there should be an option for data or even PDF files at the top center area of iTunes when the iPad is clicked under devices.
If your iPad does not show or you cannot click on it under devices which is in the leftane of iTunes, the iPad is not being seen by the computer.
Try unplugging the USB cord from the laptop then give it a few and see if the computer picks it up.

Windows 7 - TCP Parameter TcpMaxConnectRetransmissions and TcpInitialRTT

Similar Messages

Maybe you are looking for