Windows 8 HTML5/JavaScript Notification Hubs using Visual Studio 2012
Hi,
I'm not able to implement Microsoft Azure Notification Hubs using HTML5/JavaScript. Please help
Thanks
That is a Windows issue. Perhaps you should contact Microsoft about Windows issue not Visual Studio issue.
You say it fails to work. So I would imagine it downloaded and installed then you attempt to launch it and it fails to work. Or is it the download that fails to work?
Windows Compatibility Mode you can search for on the internet also.
Below is an image of an executables properties. One of the tabs (the one displayed) is for Compatibility. The issue with your system is not an issue for this forum. It's possible a setting displayed below for your executable or possibly your executables
shortcuts could be altered to correct the issue. Or not.
La vida loca
Similar Messages
-
I have VMware Fusion installed on my computer along with windows 7. I’m able to use Visual Studios 2012 & 2013; however, when I try to install SQL Server is says I don’t have a valid installation folder. So I guess my question is, can you install SQL Server to a MAC?
Thanks!Make sure you have the right version...
Camera Raw plug-in | Supported cameras
Camera Raw-compatible Adobe applications -
How create Windows Services in Azure using Visual Studio 2012
Hi,
I have a need to write a Windows Service (Batch Job), which would execute everyday at a specified time, say 4:00AM. This job will do some processing and will send out an email to predefined users. I am using Visual Studio 2012 for the development.
Based on some research, it looks like that Azure doesn't have a concept of Windows Service. Rather, we need to create WorkerRole to achieve the same.
I wrote the code to implement the WorkerRole. The problem, I am facing is that
1. How to prevent the continuous looping of the code below? I want the task to be executed only once a day at 4:00AM
2. How do I schedule this functionality in Azure?
Any help will be highly appreciated. I have provided the code sample below.
Thanks.
public class WorkerRole : RoleEntryPoint
public override void Run()
while (true)
SendNewsEmail();
Thread.Sleep(10000);
private void SendNewsEmail()
/*Email Logic Goes Here*/
public override bool OnStart()
// Set the maximum number of concurrent connections
ServicePointManager.DefaultConnectionLimit = 12;
return base.OnStart();HI
I think JuneT's answer is what you want.
However it's for Azure website.
If you still want to use a workerRole, you need much harder work.
You can use Timers Class to do such things:
http://stick2basic.wordpress.com/2013/02/22/how-to-schedule-a-c-windows-service-to-run-a-method-daily/
How do I schedule this functionality in Azure
I suggest you save the settings file in a cloud table, and notify your webrole using WCF service to let the service get the new settings when your changed it.
My Blog
Please use Make as Answer if my post solved your problem and use
Vote As Helpful if a post was useful. -
Sharepoint 2013 - Can I use Visual Studio 2012 express edition for web-parts and app parts?
I am new to sharepoint 2013. I want to develop the app and web parts using visual studio 2012 express edition. Can I use vs 2012 express edtion to create app and web parts for sharepoint 2013?
Unfortunately no, check this post:
http://sharepoint.stackexchange.com/questions/52338/sharepoint2013-development-with-vs2012-express
To build SharePoint 2013 webparts/apps you will need the 'Microsoft Office Developer Tools for Visual Studio 2012', which do not come as part of Visual Studio. The tools require Visual Studio 2012 Ultimate, Premium, or Professional.
The tools and prerequisites can be found here:
http://msdn.microsoft.com/en-us/office/apps/fp123627.aspx
Brandon Atkinson
Blog: http://brandonatkinson.blogspot.com -
Hi,
I am creating provider hosted app in visual studio 2012 using app scoped external content type having OData with Northwind url
App manifest start page url :
ODataNewAppWeb/Pages/Default.aspx
In XML it is:
<StartPage>~remoteAppUrl/Pages/Default.aspx</StartPage>
When i am deploying app pressing F5 the app gets deployed successfully....
Now i am changing my start page url in Appmanifest like this:
ODataNewApp/Lists/Employees
In XML it looks like:
StartPage>~appWebUrl/Lists/Employees</StartPage>
When i am deploying app pressing F5 the app..
Getting register SOD error.....
I have followed all the steps like:
1)Creating app domain
2)Starting all the required services
3)Creating root site collection
But still no success.. Please help me on this.... I am struggling with this from two weeks...Have you set up a wildcard DNS entry for the spapps.com domain?
Also if you're trying to connect from the server you might be hitting loop back check issues. -
How to put if condition by using visual studio 2012 for project server 2013 worflow
Hi,
If Project Data:Funding Required equals Yes
Go to s2- Lead Approval
Else
Go to End of Workflow
above condition is used it in sharepoint designer. I want same condition used in visual studio 2012.
Please help me how to get fields of project server in visual studio 2012.
Thanks in Advance in helping us.
Thank you
VinayHi Vinay,
I can't help you for the code, but the IF THEN ELSE statement is pretty well documented in the article below:
http://msdn.microsoft.com/en-us/library/752y8abs.aspx
Hope this helps,
Guillaume Rouyre, MBA, MCP, MCTS | -
Visual studio 2012 stopping on windows 8
hi..
bootcamp use visual studio 2012 on windows 8
but it stop Every 5 - 10 minutes
help me.. please...Hi thisman,
This forum is to discuss problems of C# development. Your question is not related to the topic of this forum.
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey. -
How to create a three state approval workflow in SharePoint 2013 using visual studio 2013
Hi Everyone,
i have a requirement like 3 state to approve. Here is the details:- when the item added into the list it will go for reviewer. Once the reviewer review the item, he will assign the task to concern person/department(Parallel process more than two persons).
Once they will approve the request again it will come back to reviewer and he will assign the task to team member(parallel process). Once the team member accepted then workflow terminate.
i want develop this workflow using visual studio 2013 only, not using designer..
Thanks in Advance.....
MalleshHello,
you can find multiple sample on the web like those
http://www.splessons.com/2013/12/create-state-machine-workflow-in-sharepoint-2013-using-visual-studio-2012/
http://msdn.microsoft.com/en-us/library/ee231606.aspx
I don't think that's very different using VS2013 or VS2012
Best regards, Christopher.
Blog |
Mail
Please remember to click "Mark As Answer" if a post solves your problem or
"Vote As Helpful" if it was useful.
Why mark as answer? -
Project server online workflow using visual studio
hi sir,
I am working on project online 2013(office 365).I have create a workflow with sharepoint designer also.but i have need to create workfow in project online using visual studio.please suggest me.and deploy as it wsp file.
vijayHello,
you can start with SharePoint 2013 project and then add the Project server dlls. Then add the tabs to get the project server workflow history and tast list.
follow this blog
http://blogs.msdn.com/b/project_programmability/archive/2012/11/07/creating-project-workflows-using-visual-studio-2012.aspx
It will help you to get started. Hope it helps.
Please mark as answered if it helps. -
Using Visual Studio as an HTML editor with SharePoint's Design Manager
I'm building a master page using Design Manager. I've mapped a network drive so that I can access the MasterPage.html file with an HTML editor.
I'd like to use Visual Studio 2012 as my HTML editor. But, when I modify MasterPage.html in VS, it creates a MasterPage.html~RF9158aed.TMP file alongside the MasterPage.html and MasterPage.master files, which breaks the master page in SharePoint.
I can modify MasterPage.html successfully with NotePad. I can also modify an html file, that is not associated with a folder in SharePoint via a networked drive, with VS.
Can I use Visual Studio as an HTML editor in this scenario? If so, what am I doing wrong?
Your help would be much appreciated.
Thanking you in anticipation.
Roger
rogerwithnellThe TMP file is used by VS to save off changes in the file your working on, so you can perform Undos for instance. If you shut down VS it should clean those up for you. However, this can be a challenge if you're still working on the file.
I would just make a copy of the MasterPage and place it in a folder outside the mapped folder. Then you can simply copy and paste it back into the mapped folder.
FYI, don't do this with any OOTB MasterPages! Please make a copy and rename one that comes with SP, you don't want to change those in case you need to revert back.
Good luck!
Brandon Atkinson
Blog: http://sharepointbrandon.com -
How to create demand management workflow using visual studio
Hello all,
I need to create demand management workflow (Project server 2013) using visual studio 2012. I need to understand how we can write code in it. Any references??Hi Shanila,
Here are some of the articles you can use for designing workflows using Visual Studio.
Getting started Project Server 2013 Workflows :
http://msdn.microsoft.com/en-us/library/office/ee767694(v=office.15).aspx
Using workflow for Demand Management:
http://technet.microsoft.com/en-us/library/dn458861(v=office.15).aspx
Creating Project Workflows using Visual studio 2012:
http://blogs.msdn.com/b/project_programmability/archive/2012/11/07/creating-project-workflows-using-visual-studio-2012.aspx
Thanks,
Phani -
SharePoint 2013 State Machine Workflow Developped using Visual Studio 2013 Terminated
Hi all,
I developped a state machine workflow using Visual Studio 2013, and deplyed to SharePoint 2013, the workflow work fine for first task, and some times for second task.
after that the workflow become terminated with below error:
- System.Activities.Statements.WorkflowTerminatedException: The workflow instance exceeded the throttle of 10000 activities executed in a row and could not be unloaded because it was not persistable.
I spent many days to solve this issue but witout any result...
Please advice...Hi,
According to your description, there seems an endless loop in your workflow which makes the workflow exceed the throttle.
A suggestion is that you can create a new clean sample state machine workflow firstly, when it works without error, then adding other activities with custom logic
gradually.
By doing this, it would be easier to find out what might cause the error in this workflow.
A demo about Create State machine Workflow In SharePoint 2013 for your reference:
http://www.splessons.com/2013/12/create-state-machine-workflow-in-sharepoint-2013-using-visual-studio-2012/
Best regards,
Patrick
Patrick Liang
TechNet Community Support -
Has any one worked on sharepoint 2013 workflows using visual studio.
Has any one worked with sharepoint 3013 workflows using visual studio.
Hi,
To develop SharePoint 2013 workflow using Visual Studio, you can refer to:
Develop SharePoint 2013 workflows using Visual Studio
Create a SharePoint workflow app using Visual Studio 2012
Get started with workflows in SharePoint 2013
Thanks,
Linda Li
Forum Support
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
[email protected]
Linda Li
TechNet Community Support -
Getting Dynamic Context Sensitive Help API to work with Visual Studio 2012 and 64 bit?
We have RH 9.
Our developers are working on implementing RH's dynamic CSH API inside of our software product:
http://help.adobe.com/en_US/robohelp/robohtml/WSa7dd8288c271d662-26f4398e12b0c229082-8000. html
The instructions our developer found say:
Call your Help projects with the function RH_ShowHelp. The source code for this function is contained in the support files which you import into your development project. Languages supported are Visual Basic, C/C++, JavaScript, and Java. The files are in C:\Program Files\Adobe\Adobe RoboHelp [version]\CSH API. The files are:
CSH API\RoboHelp_CSH.cpp (C/C++, dependent on the .h)
CSH API\RoboHelp_CSH.h (C/C++, dependent on the .cpp)
I zipped up the CSH API from my RH 9 version and sent it to the developer. We're using Visual Studio 2012.
But now the dev is asking, "Is there a newer version? This one doesn't compile in win32 without me making some tweaks, and doesn't work at all in x64..." and "Is RoboHelp10 an option? 9 doesn't seem VS2012 compatible or x64 compatible."
Does anyone know if there are there is a later version of the API available that works for 64-bit / VS 2012?Hi,
The RoboHelp 10 API should work for WebHelp created with RoboHelp 9. Since the RH10 API will now support Multiscreen HTML5 (introduced with RoboHelp 10), I imagine it will work with VS 2012. But I’ve not tried that. You can try the RH10 API, but Adobe won’t support it
Alternatively: A colleague of mine created a custom C# API some time ago. That might work for you: http://www.wvanweelden.eu/blog/2012/08/03/custom-webhelp-apis
Greet,
Willam -
Visual studio 2012 the name "initializeControl" does not exist in the namespace in visual WebPart
Hi All,
I'm trying to create a visual webpart in SharePoint 2013 using Visual Studio 2012 and I am seeing that the file ascx.g.cs
is missing and i have this error in file ascx.cs : the name "initializeControl" does not exist in the namespace.
And like i said i use VS2012 Ultimate
Can anyone Help me please!!!
thanks.In most scenarios this is caused by some error in code preventing Visual Studio from generating the designer file. You could try to undo the latest changes and see whether the item is being generated or not. Additionally you could try checking if the custom
tool is still associated with the Visual Web Part SPI in the Properties Window.
w: http://blog.mastykarz.nl | t:
@waldekm | c: http://mavention.codeplex.com | c:
http://mavention.nl
Maybe you are looking for
-
hi to everyone this is my coding and i want you to make a slight adjustment to print in a format which i required.. DECLARE department_no emp.empno%TYPE; CURSOR cur IS SELECT * FROM emp order by deptno; BEGIN
-
How do I limit the amount of emails in my inbox
We have a mail server at our business, I receive my mail on my PC, laptop,iPad and iPhone. The iPhone and iPad fetch my mail and as soon as I read my mail on my iPhone or iPad it loads old mail from the server. This did not happen before our last upd
-
Will iPod Touch4 now require WiFi in order to go camping and listen to my library?
Let me get this straight....i did the itunes match....it seems to work fine on my ipodtouch4...if I am out of WiFi range Ican't get music...is there a work around on this..if not...how do I get my library back on my ipod touch? Thanks!
-
Mac mini now won't even turn on
A series of problems started going on with my mac mini intel when I was attempting to burn a DVD: -I opened disk utility and attempted to burn a DVD (something I've done many times before), only to find the "burn" button was greyed out and it wouldn'
-
When adjusting the audio volume in a selected region, why does it give me a curved line as a transition instead of straight, and why cant I change the fade shape like i can with a fade in our out? When I slide thet volume all the way down it makes a