Windows 8 networking issue, restart to connect

I have windows 8 64bit, every time i enter a different network with my laptop, i
cannot get internet access until i restart my computer. for example: when i get to school from my house, i have to restart to connect to our student wireless. when i leave school and go home, i have to restart to connect to my router. when
i leave home and go to my buddy's house, i have to restart to connect to his router.... etc.
Things ive tried to resolve the issue:
windows updates
use a registry cleaner (yes i performed a backup)
ccleaner
defraggler
virus scans
from the cmd prompt:
ipconfig /release
ipconfig /renew (says this action cannot be performed while the interface has it's media disconnected)
ipconfig /flushdns
Whatever you can help me out with will be greatly appreciated.

Microsoft Windows [Version 6.2.9200]
(c) 2012 Microsoft Corporation. All rights reserved.
C:\Users\Robert>ipconfig /all
Windows IP Configuration
Host Name . . . . . . . . . . . . : TheBlackMalice2
Primary Dns Suffix . . . . . . . :
Node Type . . . . . . . . . . . . : Hybrid
IP Routing Enabled. . . . . . . . : No
WINS Proxy Enabled. . . . . . . . : No
DNS Suffix Search List. . . . . . : hsd1.wa.comcast.net.
Ethernet adapter Ethernet:
Media State . . . . . . . . . . . : Media disconnected
Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : Qualcomm Atheros AR8151 PCI-E Gigabit Eth
ernet Controller (NDIS 6.30)
Physical Address. . . . . . . . . : 08-60-6E-09-BC-AD
DHCP Enabled. . . . . . . . . . . : Yes
Autoconfiguration Enabled . . . . : Yes
Wireless LAN adapter Local Area Connection* 11:
Media State . . . . . . . . . . . : Media disconnected
Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : Microsoft Wi-Fi Direct Virtual Adapter
Physical Address. . . . . . . . . : 6E-71-D9-4A-88-A7
DHCP Enabled. . . . . . . . . . . : Yes
Autoconfiguration Enabled . . . . : Yes
Wireless LAN adapter Wi-Fi:
Connection-specific DNS Suffix . : hsd1.wa.comcast.net.
Description . . . . . . . . . . . : Broadcom 802.11ac Network Adapter
Physical Address. . . . . . . . . : 6C-71-D9-4A-88-A7
DHCP Enabled. . . . . . . . . . . : Yes
Autoconfiguration Enabled . . . . : Yes
Link-local IPv6 Address . . . . . : fe80::1d:8e7f:b2c:e8eb%12(Preferred)
IPv4 Address. . . . . . . . . . . : 192.168.1.143(Preferred)
Subnet Mask . . . . . . . . . . . : 255.255.255.0
Lease Obtained. . . . . . . . . . : Monday, April 8, 2013 8:37:35 PM
Lease Expires . . . . . . . . . . : Tuesday, April 9, 2013 8:37:39 PM
Default Gateway . . . . . . . . . : 192.168.1.1
DHCP Server . . . . . . . . . . . : 192.168.1.1
DHCPv6 IAID . . . . . . . . . . . : 325874137
DHCPv6 Client DUID. . . . . . . . : 00-01-00-01-18-47-B2-82-08-60-6E-09-BC-AD
DNS Servers . . . . . . . . . . . : 75.75.75.75
75.75.76.76
NetBIOS over Tcpip. . . . . . . . : Enabled
Ethernet adapter Hamachi:
Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : Hamachi Network Interface
Physical Address. . . . . . . . . : 7A-79-19-2D-59-09
DHCP Enabled. . . . . . . . . . . : Yes
Autoconfiguration Enabled . . . . : Yes
IPv6 Address. . . . . . . . . . . : 2620:9b::192d:5909(Preferred)
Link-local IPv6 Address . . . . . : fe80::f9cf:d3b9:4660:300%20(Preferred)
IPv4 Address. . . . . . . . . . . : 25.45.89.9(Preferred)
Subnet Mask . . . . . . . . . . . : 255.0.0.0
Lease Obtained. . . . . . . . . . : Monday, April 8, 2013 8:37:26 PM
Lease Expires . . . . . . . . . . : Tuesday, April 8, 2014 8:39:32 PM
Default Gateway . . . . . . . . . : 2620:9b::1900:1
25.0.0.1
DHCP Server . . . . . . . . . . . : 25.0.0.1
DHCPv6 IAID . . . . . . . . . . . : 612006241
DHCPv6 Client DUID. . . . . . . . : 00-01-00-01-18-47-B2-82-08-60-6E-09-BC-AD
DNS Servers . . . . . . . . . . . : fec0:0:0:ffff::1%1
fec0:0:0:ffff::2%1
fec0:0:0:ffff::3%1
NetBIOS over Tcpip. . . . . . . . : Enabled
Tunnel adapter isatap.hsd1.wa.comcast.net.:
Media State . . . . . . . . . . . : Media disconnected
Connection-specific DNS Suffix . : hsd1.wa.comcast.net.
Description . . . . . . . . . . . : Microsoft ISATAP Adapter
Physical Address. . . . . . . . . : 00-00-00-00-00-00-00-E0
DHCP Enabled. . . . . . . . . . . : No
Autoconfiguration Enabled . . . . : Yes
Tunnel adapter Teredo Tunneling Pseudo-Interface:
Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : Teredo Tunneling Pseudo-Interface
Physical Address. . . . . . . . . : 00-00-00-00-00-00-00-E0
DHCP Enabled. . . . . . . . . . . : No
Autoconfiguration Enabled . . . . : Yes
IPv6 Address. . . . . . . . . . . : 2001:0:9d38:6ab8:2822:27a7:3f57:fe70(Pref
erred)
Link-local IPv6 Address . . . . . : fe80::2822:27a7:3f57:fe70%17(Preferred)
Default Gateway . . . . . . . . . :
NetBIOS over Tcpip. . . . . . . . : Disabled
Tunnel adapter isatap.{81D34855-7407-4DA1-A677-891B4B9201EF}:
Media State . . . . . . . . . . . : Media disconnected
Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : Microsoft ISATAP Adapter #3
Physical Address. . . . . . . . . : 00-00-00-00-00-00-00-E0
DHCP Enabled. . . . . . . . . . . : No
Autoconfiguration Enabled . . . . : Yes
C:\Users\Robert>
C:\Users\Robert>

Similar Messages

Network issue with initial connections on Hyper-V

This is the opposite of all the other networking issues I have seen with Hyper-V- anyone run into this?
I am running Hyper-V on a Server Core installation, and have had the same issue when I used Server 2012R2 as when I used Server 2008R2 on the same server as a virtual host. The server is an HP ProLiant DL360 Gen8 with 2x 8-core processors, 32 GB RAM. The
VM is sized and configured to stay within 1 NUMA node. It uses a single port of the 4-port HP/Broadcom 331 NIC, with all the TCP LSO settings disable at the switch, host, and guest, same with the power management settings. We have ProxyARP on the network,
so I have set the ArpRetryCount key to 0.
I have seen it happening with and without SR-IOV enabled. The guest OS is an RDS server, so for the sake of our CAL's it has to stay at Server 2008R2. I have set up a HOSTS file to mitigate this problem, as it seems to be a DNS issue- Here's what happens:
The first time I visit a resource, the server will timeout. An example not in our HOSTS file does this consistently: If I go to https://mail.mydomain.com/OutlookWebAccess, it spins for a couple of minutes before timing out. I hit refresh and the page loads
immediately. This server is colocated in-house, as is the mailserver. I'd say it is a DNS issue at some level, but I'd like to know what level it is- Is it just timing out trying to cache the DNS request, or is there a performance issue with a DNS server on
the network? (All of our DNS is AD-integrated running on DC's).
Here is where I'm seeing this:
Internet Explorer- described above
Salient Interactive Miner- at the login screen, it searches for a database and times out. If I go to the setup and enter the IP address, it still times out. It will not find the database server until I quit and restart the program. If this is the same issue,
it would obviously not be a DNS problem.
I DON'T see it in GP9 connecting to a datasource
Prior to setting up the HOSTS file, I saw this in Windows Explorer connecting to network shares on the same LAN segment.
This appears to only happen to the Hyper-V guest OS. As a best practice, whenever Windows Update runs, I update the Integration Components.
I have the bindings properly ordered on the guest VM, with the network adapter the goes to the physical NIC first, and IPv4 ordered before IPv6.
All updates are isntalled, and the firmware is at it's latest revision.
Any ideas?

Hi Daniel,
" This appears to only happen to the Hyper-V guest OS. "
Do you mean that any other hosts can access the network resource normally except these VMs ?
If yes , my suggestion is to disable the VMQ on the physical NIC for the VMs , then try test again .
Best Regards
Elton Ji
If it is not the answer please unmark it to continue
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

Windows 7 network issues accessing shared/mapped drives.

I have three Thinkpads running on my home wireless network. Two are running XP. One - a new W520 is on Windows 7-64. I have no issues with the XP machines. The Win7 machine is having problems with the wireless network connection. It's not that I lose the network - the status is connected with a good signal. The problem is when retrieving or saving files from my server (running XP with shared/mapped drives) I get errors reading and writing files. Just opening the shared drive in My Computer on occasion displays nothing, as if it knows the drive is there, but can't read it. Sometimes it displays the folders but then will take an extremely long time if I try to open a folder. Another issue is if I try to print, the job rarely completely sends to the printer. If I plug in directly to the printer via USB, the file prints.
This has to be an issue with Windows 7 and something in the wireless setup, doesn't it?
I've searched for solutions all over the network. It seems this is a common Win7 problem with no well defined solution. I've had the issue since the very first day, but today, I'm just about ready to backrev to XP after losing 2 hours of work on a Photoshop file!
To date (over the last month) this is what I've done:
Disabled the IP6 stack.
Turned off power management to shutdown the wireless card.
Updated to the latest Intel drivers for the Ultimate-N 6300 AGN adapter (direct from Intel.)
Today, I ran this, netsh interface tcp set global rss=disabled but still have the network drive issue plus am having issues browsing web pages. It's getting worse instead of better.
Anyone familiar with this issue on a Thinkpad with known solutions or recommendations?
Thank you!

Hi
Thanks for Your Post
You may need to Disable UAC On Windows 7 . Please refer Below Link for more Details
http://support.microsoft.com/kb/937624
Hope This Helps
Cheers!!!

Windows Vista Network Issues when updating Podcasts

Hi there,
Since upgrading to VISTA i am experiencing countless problems with my internet connection when using iTunes. Using iTunes normally does not cause a problem however as soon as iTunes store downloads updated podcasts, my network connection disconnects. The podcasts only download partially and then fail as a result of my network issues. I am unable to repair my wireless network connection at this point and it appears that my wireless card disables completely. I have to reboot to resolve the issue.
Has anyone else experienced this? I am using the latest version of iTunes.
Are there any fixes?
Many thanks,

Try turning off firewalls, pop-up blockers, software accelerators, and security software.
Can you connect with everything temporarily turned off?

Slow start up of iTunes 10.6 on Windows 7 & Network issues connecting iPhone via WiFi

Ever since I updated to iTunes 10.6 and iOS 5.1 both my computer don't want to open iTunes quickly and my Phone doesn't get noticed on iTunes via WiFi on my network. When I go to start iTunes from the icon on my desktop it doesn't pop up on screen right away like it did on the version before 10.6 and on iOS 5.0.1 my phone would sync and connect on to iTunes to update apps just fine now all that has changed. Doesn't want to connect to update apps on my network via WiFi and I have tried a few different things to see if I could correct the issue but nothing has worked. I tried what another person posted to try and it did not work, I also uninstalled, rebooted computer and reinstalled iTunes but that did not work either. Nothing I have tried seems to work, it must be a Apple glitch in the software for Windows 7 to have iTunes 10.6 and iOS 5.1 not to work properly like it should as it once did without fail. Before on the versions before this everything worked just fine no issues. Apple get with the program and fix these issues we are having please. Thanks and hope they get it fixed and straightened out quick!!!

Well, here is the results of my Diagnostic Test of the phone when plugged into the computer. Maybe with this someone would be able to see something that might need looking into, if so please let me know. Thanks so much in advance. I have not tried going back to a older version of iTunes as I am just gonna wait and see if Apple can correct it, hopefully they can. It seems as if on update they left something out to make iTunes, and Syncing not working properly.
Microsoft Windows 7 x64 Ultimate Edition Service Pack 1 (Build 7601)
System manufacturer System Product Name
iTunes 10.6.1.7
QuickTime not available
FairPlay 1.14.37
Apple Application Support 2.1.7
iPod Updater Library 10.0d2
CD Driver 2.2.2.0
CD Driver DLL 2.1.3.0
Apple Mobile Device 5.1.1.4
Apple Mobile Device Driver 1.59.0.0
Bonjour 3.0.0.10 (333.10)
Gracenote SDK 1.9.5.502
Gracenote MusicID 1.9.5.115
Gracenote Submit 1.9.5.143
Gracenote DSP 1.9.5.45
iTunes Serial Number 0037AA9C0E1D0A58
Current user is an administrator.
The current local date and time is 2012-04-02 10:38:23.
iTunes is not running in safe mode.
WebKit accelerated compositing is enabled.
HDCP is not supported.
Core Media is supported.
Video Display Information
ATI Technologies Inc., ATI Radeon HD 3300 Graphics
**** External Plug-ins Information ****
No external plug-ins installed.
**** Network Connectivity Tests ****
Network Adapter Information
Adapter Name:    Removed by me
Description:    Removed by me
IP Address:    Removed by me
Subnet Mask: Removed by me
Default Gateway: Removed by me
DHCP Enabled:    Removed by me
DHCP Server:    Removed by me
Lease Obtained:   Removed by me
Lease Expires:    Removed by me
DNS Servers:    Removed by me
Active Connection:    LAN Connection
Connected:    Yes
Online:        Yes
Using Modem:    No
Using LAN:    Yes
Using Proxy:    No
Firewall Information
Connection attempt to Apple web site was successful.
Connection attempt to browsing iTunes Store was successful.
Connection attempt to purchasing from iTunes Store was successful.
Connection attempt to iPhone activation server was successful.
Connection attempt to firmware update server was successful.
Connection attempt to Gracenote server was successful.
Last successful iTunes Store access was 2012-04-02 10:37:10.
**** CD/DVD Drive Tests ****
No drivers in LowerFilters.
UpperFilters: GEARAspiWDM (2.2.2.0),
D: ATAPI iHAS422   8, Rev 4L11
Drive is empty. Did not have CD/DVD in it for the test of it.
**** Device Connectivity Tests ****
iPodService 10.6.1.7 (x64) is currently running.
iTunesHelper 10.6.1.7 is currently running.
Apple Mobile Device service 3.3.0.0 is currently running.
Universal Serial Bus Controllers:
Standard Enhanced PCI to USB Host Controller. Device is working properly.
Standard OpenHCD USB Host Controller. Device is working properly.
Standard OpenHCD USB Host Controller. Device is working properly.
Standard OpenHCD USB Host Controller. Device is working properly.
FireWire (IEEE 1394) Host Controllers:
LSI 1394 OHCI Compliant Host Controller. Device is working properly.
Connected Device Information:
Joey’s iPhone, iPhone 4S running firmware version 5.1
Serial Number:    Removed by me
**** Device Sync Tests ****
Sync tests completed successfully.

Networking issues with bridged connection

So in my network I have a netgear C6300 with a Motorola surfboard(modem/router also with dhcp turned off) connected via Ethernet to provide a separate wifi network on the other side of the house. I've been having frequent connection drops that last for about
10 seconds. I figured out my wireless adapter(netgear a6210) is bridged to the Motorola(see screenshot) and I'm wondering how to disable this bridge because I think it might be causing the connection issues. But when I try to remove the bridge is says gives
an error. If I disable the Network bridge my adapter stops working. Any ideas?
Note: before it was saying Motorola... under the enabled, bridged.
Edit:
This: I also noticed it switched from Motorola like the picture below to NETGEAR58-5G(like above)

Hi slycoder127,
If yo uare currently running Windows 10 build 10049, then you should take a look at the thread below:
No access to Internet Protocol (v4 or v6) in 10049
Which might cause some of the adapter function not working at the current build.
Best regards
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact [email protected]

Windows 10 network issue

I've installed Windows 10 yesterday and my network options are all gone. I have no wifi symbol or even wifi options and using a lan cable doesn't work either. I've installed all the latest drivers from the Acer website and according to device manager they're functioning correctly.
However, when I install the latest Ethernet Controller from Realtek (Lan_Realtek_10.1.505.2015_W10x64A) I do get an error message (The Realtek Network Controller was not found. If deep sleep mode is enabled please plug the cable). The installation stops there. When I try adjust adaptersettings through the regular configurationscreen I only get an empty folder. When I try to connect to internet, I get the message that Windows can't find any networkhardware.
The windows 10 installation has probably turned off my networkhardware, but I don't know how to turn it back on. I never had this problem before.
Here are my laptops specifications:
Acer Aspire e5-771g-73k2
Network Adapters:
Qualcomm Atheros AR956X Wireless Network Adapter
Realtek PCle GBE Family Controller
If anyone has ideas on how to fix it, please let me know!

It's related indeed, but probably because there is no network the Devices autosetup has no reason to run and closes itself.
I did find this:
http://www.tenforums.com/network-sharing/5906-no-network-adapter-detected.html
Maybe this could be the solution, as the problem seems to be the same. I'll be going back to Windows 8.1 and check the registry again. If it's al fine I'll reinstall Windows 10 again and hope it works.

Window Azure Cloud issues on SQL Connections.

Hello,
I am having a real hard time establishing SQL connection between servers in Microsoft Azure Cloud network.
My configurations are three (3)Window Server 2012 R2 in Microsoft Azure Cloud as follow:
Server One-àAD-SVR-01
Active Directory
Window Server 2012 R2
Domain Controller
Public IP Address: 23.zzz.xxx.76
Internal IP Address: 10.x.x.4
Server Two-à SQL-01
Microsoft SQL Server 2012
Public IP: 23.zzz.xxx.21
Internal IP Address: 10.x.x.6
Server Three à APP-01
Application Server
Public IP : 23.zzz.xxx.187
Internal IP Address: 10.x.x.5
All servers are on the same azure network, affinity group, domain.
All servers connected to the domain and have IP’s.
Both SQL-01 and APP-01 joined the Domain and became member servers.
Both SQL-01 and APP-01 can ping each other.
I disable the firewall rules.
However, APP-01 cannot establish connection to SQL-01 databases.
Would someone please help?
Thank you.
Edwin

Hi,
Do you get any error messages ?
Azure SQL Database works exclusively and only on TCP port 1433.It only support SQL Server Authentication,
Please make sure the VM is not blocking TCP port 1433.
More information :
http://msdn.microsoft.com/library/azure/ee336282.aspx
http://azure.microsoft.com/en-us/documentation/articles/sql-database-dotnet-how-to-use/
Regards,
Mekh.

How can I connect my macbook pro to printers on my windows wireless network, How can I connect my macbook pro to printers on my windows wireless network

My Macbook Pro running lion 10.7.2 is connected to my wifi network, which also has a PC, an hp photosmart and an hp laserjet connected to a server.
I have been able to set up printing from my mac to the photosmart by entering the ip address, although it can be tempremental.
The problem is that I cannot even find the HP Laserjet on the network at all and cannot link up to it to print.
Any ideas??

Look in the printer manual for instructions.

Can I add my mac book pro onto my Windows based network?

Hi everyone! I just got my Mac Book Pro a couple of weeks ago and let me say, its my first mac computer ever. I love it! I have a windows wireless network, and I can connect to it wireless with no problem. The only thing I can figure out is how to use my printer connected to my windows machine. I dont know if you can add a network printer on a mac like you can on a pc. Can someone help me out?
Thanks in advance.
2face

If your priter is a network printer then it should be connected via ethernet or wifi to your network with an ip address....yes mac computers can print using network printers..
now you said your printer is attached to your computer which means you do no have it on the network... you may have it shared to your workgroup.
mac's are able to connect to xp workgroups (not sure about vista).. i will attach the link to how to attach a mac to your windows workgroup..(its pretty much attaching yourself to the network with user name and pw)
http://articles.techrepublic.com.com/5100-10878_11-6103719.html
hope this all makes sence and helps you out...

Setup router to router VPN connecting 2 windows domain networks via 2 RV042 routers

I am using 2 RV042 routers. I have created a point to point VPN with Remote Security Group Type= Subnet, using the default IPSec settings.
Under advanced settings- Aggressive Mode, Keep Alive enabled.
Location A- SBS 2011 standard, Servername=SBSServer, Domainname = Smallbusiness.Local, IP address 10.1.10.50
DHCP range 10.1.10.100 to 10.1.10.175. DNS and Print services. No WINS.
Location B- Server 2008 R2, Sername=SBSServer, Domain name=Smallbusiness.Local, IP address 192.168.10.50
DHCP range 192.168.10.100 to 192.168.10.175, DNS, Print Services and Remote Desktop Services. No WINS
I am wondering 2 things. Can I setup the VPN tunnel to route traffice between the 2 networks without changing the server names. Leaving the servernames the same. I have it setup that way but also had netbios broadcast enable. If I disable netbios broadcast will that be enough for these networks to be independent of each other. I was hoping not to have to rename the domain and there are advantages to having the same user and domain name when mapping drives between networks. I have not needed to authenticate those drives or provide credititals for printing either.
2) Should I change the domain name so that each network has a unique domain name or, if I change the servername of the 2008 R2 server will that essentially solve my network issues, the primary issue being that location b has clients that occasionally can not find the 2008 R2 domain controller. After a restart the usually resolve to the correct domain controller.
Essentially what I am asking is what are the best practices to connect 2 separate Windows domain networks via a VPN and have those networks capable of file sharing to the each others domain server and printing to the network printers at both loations.
Should I have separate domain names-
Should I have separate server and computer names-

"reserved not zero on payload" generally means your pre-shared keys don't match. Try removing the "crypto isakmp key ...." line and retyping it in again on both sides. In particular DON'T cut/paste it from one router config into another, this quite often puts a space character onto the end of the key, which the router interprets as part of the key and they therefore don't match.

Networking Issues after Upgrading to Windows 8.1

I have a Windows 8 desktop PC that is working fine with my network. I can browse the Internet fine using all major browsers etc. After upgrading to Windows 8.1 through the Windows Store I noticed that my wired networking was not working correctly.
The status of the network does not change (i.e. it doesn't change to Limited Connectivity) however browsing to sites in Chrome, IE or Firefox doesn't work as well as Windows 8.
IE11 gives me the error "This page can't be displayed, make sure the web address is correct" and other browsers give a similar error. I normally have to refresh 2-3 times to get a new page to load, sometimes even more. Everything works
fine from a laptop connected at the same time so it isn't an network issue with my provider.
I thought this might be a driver issue with the two on-board Marvell wired network adapters. I wasn't able to rollback the driver to older versions I found on the Internet. I then purchased another network card, Intel Desktop gigabit and the
issue still persists with that adapter. I then tried a USB wireless adapter and the issue still persists using wifi with the wired adapters disabled. I tried a new network cable and no luck either. I also tried resetting the IP stack using
the various netsh commands.
After that I thought I might try reset the Windows 8.1 PC, however that didn't work as I didn't have the restore image available as I upgraded from the Windows Store. I then tried installing Windows 8.1 fresh using a ISO with my Windows 8 key using
some of the recent guides that are available. That all worked but it didn't fix the networking issues.
I re-installed Windows 8.0 and the networking is now fixed and back to working normal again. I'd like to try again but I think I will have the same problems. I can't imagine why this would be a driver issue as I tried 3 different network adapters
and two installs of Windows 8.1. Any ideas what would be the cause of the Windows 8.1 issue?

HI,
Since this issue only occurred in the your desktop PC, and many network adapters you tried, failed, thus I think maybe we should focus on the model of your desktop PC, I suggest you update the BIOS and chipset from the manufacture to improve
the performance of win8.1.
Please also test this issue in safe mode with networking.
Please refer to:
Windows Startup Settings (including safe mode)
http://windows.microsoft.com/en-in/windows-8/windows-startup-settings-including-safe-mode
I’d like to share the following article with you:
Wired and wireless network problems
http://windows.microsoft.com/en-IN/windows/network-connection-problem-help#network-problems=windows-81&v1h=win81tab1&v2h=win7tab1&v3h=winvistatab1&v4h=winxptab1
Regards,
Yolanda
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.
The issue occurs in safe mode as well under Windows 8.1. The motherboard is an Asus P5B Premium, however it works on Windows 8. How would I update the chipset when booted into Windows 8.1? In Device Manager it wasn't allowing me to update
the network drivers as they were newer versions already installed.
Edit: I also installed at Intel Chipset Device software dated 8/8/2013 with version 9.4.0.1026 and the issue still occurs. I am also running the latest BIOS that is available.

Windows 10 Build 9926 - Can't connect to this network in certain networks

I have been asked to ask this question here. The original thread can be found at:
http://answers.microsoft.com/en-us/insider/forum/insider_wintp-insider_web/windows-10-build-9926-cant-connect-to-this-network/e9196f95-5570-4a92-8fae-d29d7d1416b2?msgId=b2246cb5-1038-40dc-98b6-249e8734eb7f
Hello
I have a Samsung 700T tablet.
Since I got the latest update 9926 I am having issues with my corporate network access. I have to type in my user name and password on the wireless connection. When I do I get "Can't connect to this network" message.
I have tried multiple drivers for the network card a "Intel(R) Centrino(R) Advanced-N 6235". I am currently using latest.
I am able to connect fine with my home Wifi.
On the "System" event log I get the following error message when I attempt to login no the WiFi.
"A fatal alert was received from the remote endpoint. The TLS protocol defined fatal alert code is 42"
Any ideas?
I have checked and my card is set to use DHCP.
God bless,
Bruno
--- got this answer ----
Have you tried talking to your system administrator? We had a fun bug in our Cisco wireless access points and wireless controller that would
kick Win 8+ machines from even trying to connect. A very long firmware and software update process fixed it.
--- answered back ----
Hello DatAsian,
Thank you for your response.
This is a very large wireless network, and as far that I know I am the only one having this issue. My other devices on the same cube work fine. The only difference is of course Windows 10. The other machines are Windows 8.1 and Windows 7.
In the past this was caused by a driver, but I have gotten about 6 different version of my wireless driver and they all have this issue.
I read on the troubleshoot about entering the wireless configuration manually by using the "Hidden network" screen. The instructions go:
2. Tax or click to connect to a network
3. Tap or click Hidden network tap or click Connect and then enter the network info.
I cannot find this "Hidden network" text on the "Connect to a network" screen. Am I missing something? Do I need to check something that allows me to connect to Hidden network?
One thing that I forgot to mention. I need to enter my user name and password when I enter this wireless network, since this is Employee Own device network.
Any other ideas?
God bless,
Bruno
When I use an android device I had to do the following changes to the way the device connected to wireless:
EAP Method: TTLS
Phase 2 Authentication: PAP
Then I have to use my user name and password.
Is there a way to set windows to the same type of authentication?
Please let me know.
God bless,
Bruno

Hi Alex,
I have the similar problem with Bruno, using the
certificate network.
The Event View show message of the Wired-AutoConfig as below:
Information 1:
Network authentication attempts have been resumed on this network adapter.
Network Adapter: Intel(R) 82579LM Gigabit Network Connection
Interface GUID: {************************}
Information 2:
Wired 802.1X Authentication was started.
Network Adapter: Intel(R) 82579LM Gigabit Network Connection
Interface GUID: {********************}
Connection ID: 0x2
Error:
Wired 802.1X Authentication failed.
Network Adapter: Intel(R) 82579LM Gigabit Network Connection
Interface GUID: {******************************}
Peer Address: ************
Local Address: ************
Connection ID: 0x2
Identity: -
User: -
Domain: -
Reason: 0x70006
Reason Text: The network does not support authentication and 802.1X is enforced in the profile
Error Code: 0x0
Information 3:
Network authentication attempts have been temporarily suspended on this network adapter.
Network Adapter: Intel(R) 82579LM Gigabit Network Connection
Interface GUID: {*************************}
Reason Code: The network does not support authentication and 802.1X is enforced in the profile
Length of block timer (seconds): 1200
everything find with Windows 7 and 8.1
days searching the internet but nothing makes sense.
looking forward to your help
Thanks!

Issue with LDAP Connection becuase of Network issue

Hello All,
We have some network issues going on which is causing the NIC (Network interface card) to failover to another NIC. Due to this failover SUN access manager's LDAP connection pool fills up and we see errors in logs "Directory is down". We have to restart the Access manager to resolve this issue which refresh the connection pool of LDAP.
Now we have set the setting as recommended in admin guide/tuning guide. Like
1. Set event connection idle timeout to less that firewall or loadbalancer idle timeout value.
2. event connection retry count and interval on perticular error code.
Despite of above settings its not working out. Is there other way to get all the stale connections back to the LDAP pool without restarting the server?
Or something which handles the network failover or failback?
Regards
Chetan Kulshrestha

The user search name is the value you should be looking at in the LDAP attributes, that's the one that it will send to LDAP on a logon attempt. If you changed this value after mapping a group, I'm not sure but you may have to remap the group to get the change.
So on the LDAP side verify the user search attribute = the username you expect to login with (i.e. cn, samaccountname, uid, etc)
Regards,
Tim

How can i fix my iphone 3gs when i have network issues after updating to IOS 6.1.3 and avoid the connect to ITunes screen?

Im an owner of an Iphone 3gs.
When I updated my software to IOS 6.1.3 I started having network issues such as my phone would go on searching, it would search for signal and then No service after few minutes it would restart and when its on again it would show me Connect To Itunes screen, I tried connecting but nothing happens and if I just leave it as it is it will just keep on restarting and showing the same screen sometimes I might get lucky and the phone will start working again but No Service and if I turn on my 3G for the times Im outdoors it will just restart again so 3G is also another problem I have got. Today I decided to take it to an Apple Store, the guy restored it and now what happens is that it switches on and is showing me the connect to Itunes message but with black backround and i cant do anything it keeps on restarting and showing the same thing. Please if there is anyone that would like to spend some time with me to help me out, he would be more than Welcome.
Im located in South Africa

iOS: Device not recognized in iTunes for Mac OS X

Windows 8 networking issue, restart to connect

Similar Messages

Maybe you are looking for