Windows boot wait for RAID initialization
My windows startup is greatly slowed by my RAID!
I have 3 disks -- 2x Samsung SSD in RAID 0 through a Dell perc h330, and one Corsair SSD connected to the motherboard.
Windows is installed on the Corsair SSD. The RAID has no file on it currently.
Each time my machine boots, initialization of RAID costs roughly 40 secs. I disabled the RAID bios in MB CSM settings so that it doesn't show the black screen of initialization, but it doesn't save any time, for the 40 secs are added to the windows startup
screen i.e. the circle dots, walks 30+ cycles.
I suspect that is because windows is still waiting for the Raid to get ready before entering desktop. But that wastes a lot of time. Must windows wait for that piece of hardware to get ready before entering desktop? Why these two processes aren't parallel
when windows doesn't depend on the raid?
My question is, is there any way to bypass the wait time and boot into desktop first?
Thanks
Hi,
According to your description, you've already disabled the raid bios but still has a long boot time. We might take other factors into consideration such as other hardware components, applications, network, etc.
Please see detailed information in this link:
Root Causes for Slow Boots and Logons (sbsl)
http://social.technet.microsoft.com/wiki/contents/articles/10130.root-causes-for-slow-boots-and-logons-sbsl.aspx
Or you might refer to some discussions in the following link:
https://communities.intel.com/message/241965
NOTE
This
response contains a reference to a third party World Wide Web site. Microsoft is providing this information as a convenience to you.
Microsoft
does not control these sites and has not tested any software or information found on these sites.
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact [email protected]
Similar Messages
-
"Waiting for RAID Controller F/W to become ready..."
Hello
Lately I have been getting this message more often than not -- before Windows 7 (not) booting: "Waiting for RAID Controller F/W to become ready..."
Any suggestions?
I have a
Areca ARC-1680D-IX 12-ports SAS RAID
Thanks
RowbyWe sell and use these now:
http://www.intel.com/products/server/raid-controllers/RS2BL080/RS2BL080-overview.htm
http://www.intel.com/products/server/raid-controllers/RS2PI008/RS2PI008-overview.htm
But they have more here: http://www.intel.com/products/server/raid/index.htm
They also use LSI chips like Areca and Atto.
Eric
ADK -
Will genius bar install windows (boot camp) for me?
will genius bar install windows (boot camp) for me? if so, costs?
Ask them. We don't know what your local Apple Store will do for you. It will certainly cost you their hourly charge for however many hours are involved. You may have to purchase Win8 from them but if not you must have a copy of your own.
Or you can take the time to read the Boot Camp documentation and do it yourself. Start here: Apple - Support - Boot Camp. Open Boot Camp Assistant then click on the large button on the left to print the documentation. Then read it very carefully. -
[SOLVED] Random kernel panics during boot (Waiting for UDev uevents..)
Update 2012-03-31: Workaround confirmed to work, see tenthirteen's post.
Update 2012-02-03: I've narrowed down the problem to the 3.x kernels. Downgrading to kernel26-2.6.38.5-1, with the other packages up-to-date (using nouveau instead of nvidia driver), solves the problem. Still, I still consider this a problem since it forces me to use an older kernel, so if anyone has any idea how to find the problem I would be very thankful!
When I came back home after the summer vacations I did a huge upgrade with pacman -Syu (of course I read the announcements before). This included linux (3.0.3-1) from kernel26 (2.6.38.5-1) and udev (167-2 -> 173-3). After this point, the boot process randomly fails from time to time; today I had to restart more than 20 times before my machine would boot successfully.
It always occurs during "Waiting for UDev uvents to be processed". Some of the errors are:
1. The computer freezes when the message is shown (cursor stops to blink).
2. Nothing happens for a long time, then Waiting for UDev uvents to be processed [ FAIL ]s.
3. Short and long error messages that look similar to this guy's (except for the last line).
I greped for some of the error messages in /var/log but they don't seem to be logged, so the examples below are from my handwritten notes and thus not very complete (there are a lot of other error messages except these lines). It's also possible that there are some mistakes. Note that they're from different boots.
BUG: Soft lockup - CPU#1 stuck for 23 s! [modprobe:256]
BUG: Unable to handle kernel
--[End ...]--
note: udevd[225] exited with preempt_count 2
Kernel panic - not syncing: stack-protector: Kernel stack is corrupted in: c0147299
BUG: Unable to handle kernel paging request at f8d20076
Code: Bad EIP value.
EIP: ...
CRZ: ...
--[End ...]--
Kernel panic - not syncing: Attempted to kill the idle task!
Lock: Bad EIP value
Note: modprobe [296] exited with preempt_count 3
WARNING: at kernel/watchdog.c:240 watchdog-overflow-callback+0xac/...
BUG: Unable to handle kernel NULL pointer dereference at 00000286
BUG: Unable to handle kernel NULL pointer dereference at (null)
These errors are seemingly arbitrary which makes it very hard to find the problem. Sometimes it works without a single complaint, sometimes it says something about "No caching mode page present, Assuming drive cache: write through", and sometimes I get different errors (the examples above are only from today!). As you can imagine, it gets pretty annoying.
So far I've tried to:
* Use the fallback mode - nope.
* Rerun mkinitcpio -p linux - nope.
* Append noapic and nomodeset to the kernel in GRUB - nope.
* Install and try kernel26-lts - seems to work, although I don't understand what other differences there are (e.g., it doesn't start X). At least this seems to suggest that it's not a hardware problem.
* Unplug all USB devices before boot - sometimes works, sometimes not. Doesn't seem to be a direct connection.
* Remove my custom settings in /etc/modprobe.d - nope.
* A lot of other things I've forgotten.
Edit: I forgot to mention, once it's booted, the system works perfectly fine. No kernel panics etc. That's the second reason why I suspect it's not a hardware failure.
I've been thinking about trying to downgrade the kernel and udev, but with the renaming and all dependencies I'm not sure how to do that.
Since I've run out of ideas how to troubleshoot this issue, I would appreciate if I could get some suggestions here. I've search around and found similar posts but no solution that works for me.
Finally, here are some more information.
uname -a:
Linux archon 3.0-ARCH #1 SMP PREEMPT Tue Aug 30 07:32:23 UTC 2011 i686 Intel(R) Pentium(R) 4 CPU 2.60GHz GenuineIntel GNU/Linux
The packages that I upgraded with pacman -Syu that day (removed most KDE packages from the list):
[2011-08-26 15:14] Running 'pacman-color -Syu'
[2011-08-26 15:14] synchronizing package lists
[2011-08-26 15:18] Running 'pacman-color -Sy pacman'
[2011-08-26 15:18] synchronizing package lists
[2011-08-26 15:18] upgraded linux-api-headers (2.6.38.1-1 -> 3.0.1-1)
[2011-08-26 15:19] warning: /etc/locale.gen installed as /etc/locale.gen.pacnew
[2011-08-26 15:19] Generating locales...
[2011-08-26 15:19] en_US.UTF-8... done
[2011-08-26 15:19] en_US.ISO-8859-1... done
[2011-08-26 15:19] sv_SE.UTF-8... done
[2011-08-26 15:19] sv_SE.ISO-8859-1... done
[2011-08-26 15:19] Generation complete.
[2011-08-26 15:19] upgraded glibc (2.13-5 -> 2.14-5)
[2011-08-26 15:19] upgraded pacman (3.5.3-1 -> 3.5.4-4)
[2011-08-26 15:27] Running 'pacman-color -Syu'
[2011-08-26 15:27] synchronizing package lists
[2011-08-26 15:27] starting full system upgrade
[2011-08-26 15:29] Running 'pacman-color -Syu'
[2011-08-26 15:29] synchronizing package lists
[2011-08-26 15:29] starting full system upgrade
[2011-08-26 15:29] Running 'pacman-color -Rsn linuxwacom-bamboo-cth-ctl'
[2011-08-26 15:29] removed linuxwacom-bamboo-cth-ctl (0.10.99.1-1)
[2011-08-26 15:29] Running 'pacman-color -Syu'
[2011-08-26 15:29] synchronizing package lists
[2011-08-26 15:29] starting full system upgrade
[2011-08-26 15:29] Running 'pacman-color -Syu'
[2011-08-26 15:29] synchronizing package lists
[2011-08-26 15:29] starting full system upgrade
[2011-08-26 15:53] Running 'pacman-color -Syu'
[2011-08-26 15:53] synchronizing package lists
[2011-08-26 15:54] starting full system upgrade
[2011-08-26 16:03] warning: /etc/krb5.conf saved as /etc/krb5.conf.pacsave
[2011-08-26 16:03] removed heimdal (1.3.3-4)
[2011-08-26 16:03] removed eigen (2.0.15-1)
[2011-08-26 16:03] removed python2-qt (4.8.3-1)
[2011-08-26 16:03] removed kernel26 (2.6.38.5-1)
[2011-08-26 16:04] removed kernel26-headers (2.6.38.5-1)
[2011-08-26 16:04] removed libreoffice (3.3.2-2)
[2011-08-26 16:04] upgraded readline (6.2.001-1 -> 6.2.001-2)
[2011-08-26 16:04] upgraded bash (4.2.008-1 -> 4.2.010-1)
[2011-08-26 16:04] upgraded attr (2.4.44-3 -> 2.4.46-1)
[2011-08-26 16:04] upgraded acl (2.2.49-2 -> 2.2.51-1)
[2011-08-26 16:04] upgraded rsync (3.0.8-1 -> 3.0.8-2)
[2011-08-26 16:04] upgraded abs (2.4.2-1 -> 2.4.3-1)
[2011-08-26 16:04] upgraded gcc-libs (4.6.0-4 -> 4.6.1-3)
[2011-08-26 16:04] upgraded zlib (1.2.5-3 -> 1.2.5-4)
[2011-08-26 16:04] upgraded icu (4.6.1-1 -> 4.8.1-1)
[2011-08-26 16:04] upgraded boost-libs (1.46.0-4 -> 1.47.0-1)
[2011-08-26 16:04] upgraded libmysqlclient (5.5.11-1 -> 5.5.15-1)
[2011-08-26 16:04] upgraded mysql-clients (5.5.11-1 -> 5.5.15-1)
[2011-08-26 16:04] hostname and {,yp,nis}domainname has moved:
[2011-08-26 16:04] ----------
[2011-08-26 16:04] hostname is now in coreutils
[2011-08-26 16:04] domainname is now in yp-tools
[2011-08-26 16:04] their functionality might have changed slightly
[2011-08-26 16:04]
[2011-08-26 16:04] dnsdomainname remains in net-tools
[2011-08-26 16:04] ----------
[2011-08-26 16:04] upgraded net-tools (1.60-14 -> 1.60-18)
[2011-08-26 16:04] warning: directory permissions differ on var/lib/mysql/
filesystem: 755 package: 700
[2011-08-26 16:04] upgraded mysql (5.5.11-1 -> 5.5.15-1)
[2011-08-26 16:04] upgraded libpng (1.4.5-1 -> 1.4.8-1)
[2011-08-26 16:04] upgraded sqlite3 (3.7.6.1-1 -> 3.7.7.1-1)
[2011-08-26 16:04] upgraded run-parts (3.4.1-1 -> 3.4.4-1)
[2011-08-26 16:04] upgraded db (5.1.25-1 -> 5.2.28-1)
[2011-08-26 16:04] installed libgssglue (0.3-1)
[2011-08-26 16:04] installed libtirpc (0.2.2-2)
[2011-08-26 16:04] upgraded pam (1.1.3-1 -> 1.1.4-1)
[2011-08-26 16:04] Fixing gshadow file ...
[2011-08-26 16:04] upgraded shadow (4.1.4.3-1 -> 4.1.4.3-2)
[2011-08-26 16:04] upgraded gmp (5.0.1-2 -> 5.0.2-3)
[2011-08-26 16:04] upgraded libcap (2.20-1 -> 2.22-1)
[2011-08-26 16:04] upgraded coreutils (8.12-1 -> 8.12-3)
[2011-08-26 16:04] Updating certificates. This might take a while...
[2011-08-26 16:04] upgraded ca-certificates (20090814+nmu2-1 -> 20110421-3)
[2011-08-26 16:04] upgraded pcre (8.12-1 -> 8.13-2)
[2011-08-26 16:04] upgraded glib2 (2.28.6-1 -> 2.28.8-1)
[2011-08-26 16:04] upgraded iana-etc (2.30-1 -> 2.30-2)
[2011-08-26 16:04] warning: /etc/fstab installed as /etc/fstab.pacnew
[2011-08-26 16:04] warning: directory permissions differ on run/
filesystem: 1777 package: 755
[2011-08-26 16:04] upgraded filesystem (2011.04-1 -> 2011.08-1)
[2011-08-26 16:04] upgraded dbus-core (1.4.1-1 -> 1.4.14-1)
[2011-08-26 16:04] upgraded xproto (7.0.21-1 -> 7.0.22-1)
[2011-08-26 16:04] upgraded libx11 (1.4.3-2 -> 1.4.4-1)
[2011-08-26 16:05] upgraded dbus (1.4.1-1 -> 1.4.14-1)
[2011-08-26 16:05] upgraded freetype2 (2.4.4-2 -> 2.4.6-1)
[2011-08-26 16:05] upgraded libxfont (1.4.3-1 -> 1.4.4-1)
[2011-08-26 16:05] upgraded util-linux (2.19-4 -> 2.19.1-3)
[2011-08-26 16:05] upgraded module-init-tools (3.12-2 -> 3.16-1)
[2011-08-26 16:05] ATTENTION UDEV:
[2011-08-26 16:05] ----------
[2011-08-26 16:05] Kernel 2.6.32 or newer is now required.
[2011-08-26 16:05] --
[2011-08-26 16:05] OSS emulation modules are not loaded by default, add to rc.conf if needed.
[2011-08-26 16:05] --
[2011-08-26 16:05] Arch specific cd symlinks are now no longer created.
[2011-08-26 16:05] --
[2011-08-26 16:05] cd and net persistent rules will no longer be autogenerated,
[2011-08-26 16:05] see <https://wiki.archlinux.org/index.php/Udev> for details.
[2011-08-26 16:05] --
[2011-08-26 16:05] Errors are now logged (possibly to the console) by default.
[2011-08-26 16:05] --
[2011-08-26 16:05] Arch's custom blacklisting logic has been removed. MOD_AUTOLOAD and
[2011-08-26 16:05] blacklisting in MODULES no longer works.
[2011-08-26 16:05] See 'man modprobe.conf' for a replacement to blacklisting.
[2011-08-26 16:05] To disable a module mod1 on the kernel command line, use
[2011-08-26 16:05] mod1.disable=1
[2011-08-26 16:05] or
[2011-08-26 16:05] modprobe.blacklist=mod1
[2011-08-26 16:05] --
[2011-08-26 16:05] The following modules are no longer unconditionally loaded:
[2011-08-26 16:05] pcspkr irtty-sir analog lp ppdev ide-generic
[2011-08-26 16:05] Add them to MODULES in rc.conf if you need them.
[2011-08-26 16:05] --
[2011-08-26 16:05] Support for non-devtmpfs self-compiled kernels have been moved to udev-compat.
[2011-08-26 16:05] --
[2011-08-26 16:05] Blacklisting of framebuffer devices has moved from /etc/modprobe.d to
[2011-08-26 16:05] /lib/modprobe.d. Any customizations shoud be done to the file in /etc, as it
[2011-08-26 16:05] takes precedence.
[2011-08-26 16:05] --
[2011-08-26 16:05] kbd and rtc devices are no longer world readable.
[2011-08-26 16:05] --
[2011-08-26 16:05] rtc is no longer in the audio group and fb devices are no longer in
[2011-08-26 16:05] the video group, as permissions and ownership of fb devices are controlled
[2011-08-26 16:05] by X.
[2011-08-26 16:05] ---------------
[2011-08-26 16:05] upgraded udev (167-2 -> 173-3)
[2011-08-26 16:05] upgraded libdrm (2.4.25-1 -> 2.4.26-1)
[2011-08-26 16:05] upgraded pixman (0.20.2-1 -> 0.22.2-1)
[2011-08-26 16:05] upgraded libgpg-error (1.9-3 -> 1.10-1)
[2011-08-26 16:05] upgraded libgcrypt (1.4.6-3 -> 1.5.0-1)
[2011-08-26 16:05] upgraded xorg-xkbcomp (1.2.1-2 -> 1.2.3-1)
[2011-08-26 16:05] upgraded xorg-server-common (1.10.1-1 -> 1.10.3.901-1)
[2011-08-26 16:05] upgraded xorg-server (1.10.1-1 -> 1.10.3.901-1)
[2011-08-26 16:05] upgraded nvidia-173xx-utils (173.14.30-1 -> 173.14.31-1)
[2011-08-26 16:05] upgraded libxext (1.2.0-1 -> 1.3.0-1)
[2011-08-26 16:05] upgraded libxrandr (1.3.1-1 -> 1.3.2-1)
[2011-08-26 16:05] upgraded inputproto (2.0.1-1 -> 2.0.2-1)
[2011-08-26 16:05] upgraded libxi (1.4.2-1 -> 1.4.3-1)
[2011-08-26 16:05] upgraded xorg-xset (1.2.1-2 -> 1.2.2-1)
[2011-08-26 16:05] upgraded xdg-utils (1.1.0rc1-2 -> 1.1.0rc1-3)
[2011-08-26 16:05] upgraded qt (4.7.2-6 -> 4.7.3-3)
[2011-08-26 16:05] installed libssh2 (1.2.9-1)
[2011-08-26 16:05] upgraded curl (7.21.6-1 -> 7.21.7-1)
[2011-08-26 16:05] upgraded raptor (2.0.2-1 -> 2.0.4-1)
[2011-08-26 16:05] upgraded mpfr (3.0.1-1 -> 3.0.1.p4-2)
[2011-08-26 16:05] upgraded rasqal (1:0.9.21-1 -> 1:0.9.27-1)
[2011-08-26 16:05] upgraded binutils (2.21-7 -> 2.21.1-2)
[2011-08-26 16:05] upgraded libmpc (0.9-1 -> 0.9-2)
[2011-08-26 16:05] upgraded isl (0.06-1 -> 0.06-2)
[2011-08-26 16:05] upgraded cloog (0.16.2-1 -> 0.16.2-2)
[2011-08-26 16:05] upgraded ppl (0.11.2-1 -> 0.11.2-2)
[2011-08-26 16:05] upgraded gcc (4.6.0-4 -> 4.6.1-3)
[2011-08-26 16:05] upgraded libtool (2.4-3 -> 2.4-4)
[2011-08-26 16:05] upgraded redland (1:1.0.12-1 -> 1:1.0.14-1)
[2011-08-26 16:05] upgraded redland-storage-virtuoso (1:1.0.12-1 -> 1:1.0.14-1)
[2011-08-26 16:05] upgraded soprano (2.6.0-5 -> 2.7.0-1)
[2011-08-26 16:05] upgraded akonadi (1.5.2-1 -> 1.6.0-2)
[2011-08-26 16:05] upgraded dialog (1.1_20110302-1 -> 1.1_20110707-1)
[2011-08-26 16:05] upgraded psmisc (22.13-1 -> 22.14-1)
[2011-08-26 16:05] upgraded alsa-utils (1.0.24.2-1 -> 1.0.24.2-3)
[2011-08-26 16:06] upgraded exiv2 (0.21.1-1 -> 0.21.1-2)
[2011-08-26 16:06] upgraded strigi (git20110405-1 -> 0.7.5-4)
[2011-08-26 16:06] upgraded xz (5.0.2-1 -> 5.0.3-1)
[2011-08-26 16:06] upgraded libsasl (2.1.23-5 -> 2.1.23-7)
[2011-08-26 16:06] upgraded libldap (2.4.24-1 -> 2.4.26-3)
[2011-08-26 16:06] upgraded keyutils (1.4-1 -> 1.5.2-1)
[2011-08-26 16:06] installed krb5 (1.9.1-3)
[2011-08-26 16:06] upgraded shared-desktop-ontologies (0.6.0-1 -> 0.7.1-1)
[2011-08-26 16:06] upgraded libdbusmenu-qt (0.8.2-1 -> 0.8.3-1)
[2011-08-26 16:06] upgraded grantlee (0.1.8-1 -> 0.1.9-1)
[2011-08-26 16:06] upgraded aspell (0.60.6-5 -> 0.60.6.1-1)
[2011-08-26 16:06] upgraded dbus-glib (0.92-1 -> 0.94-2)
[2011-08-26 16:06] upgraded hunspell (1.2.15-1 -> 1.3.2-1)
[2011-08-26 16:06] upgraded enchant (1.6.0-1 -> 1.6.0-3)
[2011-08-26 16:06] upgraded libogg (1.2.2-1 -> 1.3.0-1)
[2011-08-26 16:06] upgraded flac (1.2.1-2 -> 1.2.1-3)
[2011-08-26 16:06] upgraded libsndfile (1.0.24-1 -> 1.0.25-1)
[2011-08-26 16:06] upgraded libpulse (0.9.22-2 -> 0.9.23-1)
[2011-08-26 16:06] installed libqzeitgeist (0.7.0-1)
[2011-08-26 16:06] upgraded pango (1.28.4-2 -> 1.28.4-3)
[2011-08-26 16:06] upgraded gstreamer0.10 (0.10.32-1 -> 0.10.35-1)
[2011-08-26 16:06] upgraded gstreamer0.10-base (0.10.32-4 -> 0.10.35-1)
[2011-08-26 16:06] upgraded gstreamer0.10-base-plugins (0.10.32-4 -> 0.10.35-1)
[2011-08-26 16:06] upgraded phonon-gstreamer (4.5.0-1 -> 4.5.1-1)
[2011-08-26 16:06] upgraded sdl (1.2.14-6 -> 1.2.14-7)
[2011-08-26 16:06] upgraded xvidcore (1.3.1-1 -> 1.3.2-1)
[2011-08-26 16:06] upgraded x264 (20110327-1 -> 20110617-1)
[2011-08-26 16:06] upgraded libvpx (0.9.6-2 -> 0.9.7.p1-1)
[2011-08-26 16:06] upgraded libva (1.0.12-1 -> 1.0.14-1)
[2011-08-26 16:06] installed rtmpdump (2.4-1)
[2011-08-26 16:06] upgraded ffmpeg (20110330-1 -> 20110724-1)
[2011-08-26 16:06] upgraded cifs-utils (4.9-2 -> 4.9-3)
[2011-08-26 16:06] upgraded smbclient (3.5.8-2 -> 3.6.0-4)
[2011-08-26 16:06] upgraded mesa (7.10.2-2 -> 7.11-1)
[2011-08-26 16:06] upgraded libsamplerate (0.1.7-1 -> 0.1.8-1)
[2011-08-26 16:06] upgraded jack (0.120.1-1 -> 0.121.2-2)
[2011-08-26 16:06] upgraded fluidsynth (1.1.3-2 -> 1.1.4-1)
[2011-08-26 16:06] upgraded libass (0.9.11-1 -> 0.9.13-1)
[2011-08-26 16:06] upgraded libproxy (0.4.6-6 -> 0.4.7-1)
[2011-08-26 16:06] upgraded libjpeg-turbo (1.1.0-1 -> 1.1.1-3)
[2011-08-26 16:06] upgraded v4l-utils (0.8.3-1 -> 0.8.5-1)
[2011-08-26 16:06] upgraded taglib (1.7-1 -> 1.7-3)
[2011-08-26 16:06] upgraded libdvbpsi (0.1.7-1 -> 0.2.0-1)
[2011-08-26 16:06] upgraded libebml (1.2.0-1 -> 1.2.1-1)
[2011-08-26 16:06] upgraded libmatroska (1.1.0-1 -> 1.2.0-1)
[2011-08-26 16:06] upgraded libmodplug (0.8.8.1-1 -> 0.8.8.3-1)
[2011-08-26 16:06] upgraded libmpeg2 (0.5.1-1 -> 0.5.1-3)
[2011-08-26 16:06] upgraded libmtp (1.0.2-2 -> 1.1.0-1)
[2011-08-26 16:06] installed libupnp (1.6.13-1)
[2011-08-26 16:06] upgraded vlc (1.1.9-1 -> 1.1.11-4)
[2011-08-26 16:06] upgraded phonon-vlc (0.4.0-1 -> 0.4.1-1)
[2011-08-26 16:06] upgraded phonon (4.5.0-1 -> 4.5.55-1)
[2011-08-26 16:06] upgraded upower (0.9.10-1 -> 0.9.12-1)
[2011-08-26 16:07] upgraded device-mapper (2.02.84-1 -> 2.02.88-1)
[2011-08-26 16:07] upgraded parted (2.3-1 -> 3.0-3)
[2011-08-26 16:07] upgraded lvm2 (2.02.84-1 -> 2.02.88-1)
[2011-08-26 16:07] upgraded eject (2.1.5-5 -> 2.1.5-7)
[2011-08-26 16:07] upgraded udisks (1.0.3-2 -> 1.0.3-6)
[2011-08-26 16:07] upgraded libxcursor (1.1.11-1 -> 1.1.12-1)
[2011-08-26 16:07] upgraded ntrack (1:13-1 -> 1:13-2)
[2011-08-26 16:07] upgraded libssh (0.4.8-1 -> 0.5.1-1)
[2011-08-26 16:07] upgraded oxygen-icons (4.6.2-1 -> 4.7.0-1)
[2011-08-26 16:07] upgraded xorg-xauth (1.0.5-2 -> 1.0.6-1)
[2011-08-26 16:07] installed qjson (0.7.1-1)
[2011-08-26 16:08] upgraded amarok (2.4.0-4 -> 2.4.3-1)
[2011-08-26 16:08] upgraded apr (1.4.2-1 -> 1.4.5-1)
[2011-08-26 16:08] upgraded apr-util (1.3.10-2 -> 1.3.12-2)
[2011-08-26 16:08] upgraded atk (2.0.0-1 -> 2.0.1-1)
[2011-08-26 16:08] upgraded avahi (0.6.30-2 -> 0.6.30-4)
[2011-08-26 16:08] installed eigen2 (2.0.16-1)
[2011-08-26 16:08] upgraded libffi (3.0.9-1 -> 3.0.10-1)
[2011-08-26 16:08] upgraded python (3.2-2 -> 3.2.1-1)
[2011-08-26 16:08] installed sip (4.12.4-1)
[2011-08-26 16:08] installed pyqt (4.8.5-1)
[2011-08-26 16:08] upgraded python2 (2.7.1-9 -> 2.7.2-2)
[2011-08-26 16:08] upgraded python2-sip (4.12.1-1 -> 4.12.4-1)
[2011-08-26 16:08] upgraded dbus-python (0.83.1-2 -> 0.84.0-1)
[2011-08-26 16:08] installed python2-pyqt (4.8.5-1)
[2011-08-26 16:08] upgraded glew (1.5.8-1 -> 1.6.0-1)
[2011-08-26 16:08] upgraded blas (3.3.0-2 -> 3.3.1-2)
[2011-08-26 16:08] upgraded lapack (3.3.0-2 -> 3.3.1-2)
[2011-08-26 16:08] upgraded python2-numpy (1.5.1-2 -> 1.6.0-1)
[2011-08-26 16:08] upgraded avogadro (1.0.3-1 -> 1.0.3-3)
[2011-08-26 16:08] upgraded bison (2.4.3-1 -> 2.5-1)
[2011-08-26 16:08] upgraded bluez (4.93-1 -> 4.96-1)
[2011-08-26 16:08] upgraded boost (1.46.0-4 -> 1.47.0-1)
[2011-08-26 16:08] upgraded cabextract (1.3-1 -> 1.4-1)
[2011-08-26 16:08] upgraded libsigc++ (2.2.9-1 -> 2.2.10-1)
[2011-08-26 16:08] upgraded cairomm (1.9.8-1 -> 1.10.0-1)
[2011-08-26 16:08] upgraded chmlib (0.40-1 -> 0.40-2)
[2011-08-26 16:08] installed nettle (2.2-1)
[2011-08-26 16:08] upgraded gnutls (2.12.3-1 -> 3.0.1-1)
[2011-08-26 16:08] upgraded libcups (1.4.6-1 -> 1.4.8-2)
[2011-08-26 16:08] upgraded gdk-pixbuf2 (2.23.3-1 -> 2.23.5-1)
[2011-08-26 16:08] upgraded gtk-update-icon-cache (2.24.4-1 -> 2.24.5-3)
[2011-08-26 16:08] upgraded gtk2 (2.24.4-1 -> 2.24.5-3)
[2011-08-26 16:09] upgraded nspr (4.8.7-1 -> 4.8.9-1)
[2011-08-26 16:09] upgraded nss (3.12.9-1 -> 3.12.11-1)
[2011-08-26 16:09] upgraded libevent (2.0.10-1 -> 2.0.12-1)
[2011-08-26 16:09] upgraded xorg-mkfontscale (1.0.8-1 -> 1.0.9-1)
[2011-08-26 16:10] upgraded ttf-dejavu (2.32-2 -> 2.33-1)
[2011-08-26 16:10] upgraded chromium (11.0.696.57-1 -> 13.0.782.215-1)
[2011-08-26 16:10] upgraded cln (1.3.1-1 -> 1.3.2-1)
[2011-08-26 16:10] upgraded clucene (0.9.21b-1 -> 2.3.3.4-1)
[2011-08-26 16:11] upgraded cmake (2.8.4-1 -> 2.8.5-1)
[2011-08-26 16:11] upgraded consolekit (0.4.4-1 -> 0.4.5-1)
[2011-08-26 16:11] upgraded cryptsetup (1.2.0-1 -> 1.3.1-2)
[2011-08-26 16:11] upgraded poppler (0.16.4-1 -> 0.16.7-1)
[2011-08-26 16:11] daemon script has been renamed to /etc/rc.d/cupsd
[2011-08-26 16:11] change your entry in /etc/rc.conf
[2011-08-26 16:11] upgraded cups (1.4.6-1 -> 1.4.8-2)
[2011-08-26 16:11] upgraded cvs (1.11.23-6 -> 1.11.23-7)
[2011-08-26 16:11] upgraded dash (0.5.6.1-2 -> 0.5.7-2)
[2011-08-26 16:11] upgraded dconf (0.7.3-2 -> 0.8.0-1)
[2011-08-26 16:11] upgraded dcron (4.4-2 -> 4.5-2)
[2011-08-26 16:11] upgraded diffutils (3.0-2 -> 3.1-1)
[2011-08-26 16:11] upgraded libksba (1.0.8-1 -> 1.2.0-1)
[2011-08-26 16:11] upgraded libassuan (2.0.1-1 -> 2.0.2-1)
[2011-08-26 16:11] upgraded dirmngr (1.1.0-1 -> 1.1.0-3)
[2011-08-26 16:11] upgraded dri2proto (2.3-1 -> 2.6-1)
[2011-08-26 16:11] upgraded fakeroot (1.15.1-1 -> 1.17-1)
[2011-08-26 16:11] upgraded file (5.06-1 -> 5.08-1)
[2011-08-26 16:11] upgraded startup-notification (0.10-2 -> 0.12-1)
[2011-08-26 16:11] upgraded mime-types (1.0-3 -> 8-1)
[2011-08-26 16:11] upgraded libnotify (0.7.2-1 -> 0.7.3-1)
[2011-08-26 16:11] upgraded firefox (4.0.1-1 -> 6.0-1)
[2011-08-26 16:11] upgraded flashplugin (10.2.159.1-2 -> 10.3.183.7-1)
[2011-08-26 16:11] - The directories /usr/lib/perl5/current, /usr/lib/perl5/site_perl/current,
[2011-08-26 16:11] /usr/lib/perl5/site_perl/5.10.1, and /usr/share/perl5/site_perl/5.10.1
[2011-08-26 16:11] have been removed from @INC.
[2011-08-26 16:11] - The script/binary directories are now /usr/bin/*_perl instead of
[2011-08-26 16:11] /usr/lib/perl5/*_perl/bin which will be eventually removed.
[2011-08-26 16:11] upgraded perl (5.12.3-1 -> 5.14.1-3)
[2011-08-26 16:11] upgraded foomatic-db (4.0.6_20101215-1 -> 1:4.0.7_20110707-1)
[2011-08-26 16:11] upgraded foomatic-filters (4.0.6_20101215-1 -> 1:4.0.7_20110707-1)
[2011-08-26 16:11] upgraded foomatic-db-engine (4.0.6_20101215-1 -> 1:4.0.7_20110707-1)
[2011-08-26 16:11] upgraded fortune-mod (1.99.1-4 -> 1.99.1-5)
[2011-08-26 16:12] upgraded fpc (2.4.2-1 -> 2.4.4-3)
[2011-08-26 16:12] upgraded gawk (3.1.8-2 -> 4.0.0-1)
[2011-08-26 16:12] upgraded gc (7.1-1 -> 7.1-3)
[2011-08-26 16:12] upgraded gcc-fortran (4.6.0-4 -> 4.6.1-3)
[2011-08-26 16:12] upgraded gdb (7.2-2 -> 7.3-2)
[2011-08-26 16:12] upgraded libftdi (0.18-2 -> 0.19-1)
[2011-08-26 16:12] upgraded lirc-utils (1:0.9.0-2 -> 1:0.9.0-6)
[2011-08-26 16:12] installed mpg123 (1.13.3-2)
[2011-08-26 16:12] upgraded mplayer (33159-1 -> 34007-1)
[2011-08-26 16:12] upgraded gnome-mplayer (1.0.3-1 -> 1.0.4-1)
[2011-08-26 16:12] upgraded gecko-mediaplayer (1.0.3-1 -> 1.0.4-1)
[2011-08-26 16:12] upgraded libggz (0.0.14.1-1 -> 0.0.14.1-2)
[2011-08-26 16:12] upgraded ggz-client-libs (0.0.14.1-1 -> 0.0.14.1-2)
[2011-08-26 16:12] upgraded ghostscript (9.02-1 -> 9.04-5)
[2011-08-26 16:12] upgraded pygobject-devel (2.28.4-1 -> 2.28.6-1)
[2011-08-26 16:12] upgraded pygobject (2.28.4-1 -> 2.28.6-1)
[2011-08-26 16:12] upgraded pygtk (2.24.0-1 -> 2.24.0-2)
[2011-08-26 16:12] upgraded gimp (2.6.11-5 -> 2.6.11-6)
[2011-08-26 16:12] upgraded git (1.7.5-1 -> 1.7.6.1-1)
[2011-08-26 16:12] upgraded glibmm (2.28.0-1 -> 2.28.2-1)
[2011-08-26 16:12] upgraded glib-networking (2.28.6.1-2 -> 2.28.7-4)
[2011-08-26 16:12] upgraded glproto (1.4.12-1 -> 1.4.14-1)
[2011-08-26 16:12] upgraded gnugo (3.8-1 -> 3.8-2)
[2011-08-26 16:12] upgraded gnupg (1.4.11-2 -> 1.4.11-3)
[2011-08-26 16:12] upgraded pinentry (0.8.1-1 -> 0.8.1-3)
[2011-08-26 16:12] upgraded gnupg2 (2.0.17-1 -> 2.0.18-1)
[2011-08-26 16:12] upgraded wxgtk (2.8.12-1 -> 2.8.12.1-1)
[2011-08-26 16:12] ==> To add the gnuplot mode in Emacs, add the content of /usr/share/emacs/site-lisp/dotemacs to your ~/.emacs file.
[2011-08-26 16:12] Updating TeX tree...
[2011-08-26 16:12] mktexlsr: Updating /etc/texmf/ls-R...
[2011-08-26 16:12] mktexlsr: Updating /usr/share/texmf/ls-R...
[2011-08-26 16:12] mktexlsr: Updating /usr/share/texmf-dist/ls-R...
[2011-08-26 16:13] mktexlsr: Updating /var/lib/texmf/ls-R...
[2011-08-26 16:13] mktexlsr: Done.
[2011-08-26 16:13] upgraded gnuplot (4.4.2-2 -> 4.4.3-1)
[2011-08-26 16:13] upgraded gtkmm (2.24.0-1 -> 2.24.2-1)
[2011-08-26 16:13] upgraded gparted (0.8.0-2 -> 0.9.0-3)
[2011-08-26 16:13] upgraded gpgme (1.3.0-1 -> 1.3.1-1)
[2011-08-26 16:13] upgraded gpsd (2.96-1 -> 3.0-3)
[2011-08-26 16:13] upgraded graphicsmagick (1.3.12-1 -> 1.3.12-2)
[2011-08-26 16:13] upgraded grep (2.7-1 -> 2.9-1)
[2011-08-26 16:13] warning: /boot/grub/menu.lst installed as /boot/grub/menu.lst.pacnew
[2011-08-26 16:13] upgraded grub (0.97-17 -> 0.97-20)
[2011-08-26 16:13] upgraded gsl (1.14-1 -> 1.15-1)
[2011-08-26 16:13] upgraded vim-runtime (7.3.138-1 -> 7.3.266-1)
[2011-08-26 16:13] upgraded ruby (1.9.2_p180-1 -> 1.9.2_p290-1)
[2011-08-26 16:13] Updating desktop and mime database...done.
[2011-08-26 16:13] upgraded gvim (7.3.138-1 -> 7.3.266-1)
[2011-08-26 16:13] upgraded hdf5 (1.8.6-1 -> 1.8.7-1)
[2011-08-26 16:13] upgraded heirloom-mailx (12.5-1 -> 12.5-2)
[2011-08-26 16:13] upgraded htop (0.9-1 -> 0.9-2)
[2011-08-26 16:13] installed lcms2 (2.2-1)
[2011-08-26 16:13] upgraded imagemagick (6.6.9.4-1 -> 6.7.1.6-1)
[2011-08-26 16:13] installed iproute2 (2.6.39-1)
[2011-08-26 16:13] upgraded kbd (1.15.2-1 -> 1.15.3-1)
[2011-08-26 16:13] warning: /etc/inittab installed as /etc/inittab.pacnew
[2011-08-26 16:13] warning: /etc/rc.conf installed as /etc/rc.conf.pacnew
[2011-08-26 16:13] Blacklisting of modules is no longer supported in rc.conf,
[2011-08-26 16:13] please add blacklist entries to /etc/modprobe.d/ instead.
[2011-08-26 16:13] VERBOSE= in rc.conf no longer has any effect.
[2011-08-26 16:13] Please append 'quiet' to your kernel command line.
[2011-08-26 16:13] upgraded initscripts (2011.04.1-2 -> 2011.07.3-1)
[2011-08-26 16:13] upgraded poppler-glib (0.16.4-1 -> 0.16.7-1)
[2011-08-26 16:13] upgraded inkscape (0.48.1-2 -> 0.48.2-1)
[2011-08-26 16:13] upgraded irssi (0.8.15-4 -> 0.8.15-5)
[2011-08-26 16:13] upgraded jfsutils (1.1.14-2 -> 1.1.15-2)
[2011-08-26 16:14] upgraded jre (6u25-1 -> 7-3)
[2011-08-26 16:14] upgraded libdmtx (0.7.2-2 -> 0.7.4-1)
[2011-08-26 16:14] installed qrencode (3.1.1-2)
[2011-08-26 16:14] installed prison (1.0-1)
[2011-08-26 16:14] upgraded libedit (20110227_3.0-1 -> 20110802_3.0-1)
[2011-08-26 16:14] upgraded openssh (5.8p2-1 -> 5.8p2-9)
[2011-08-26 16:14] upgraded lm_sensors (3.3.0-1 -> 3.3.1-2)
[2011-08-26 16:14] upgraded xorg-xprop (1.2.0-2 -> 1.2.1-1)
[2011-08-26 16:14] warning: /usr/share/config/kdm/kdmrc installed as /usr/share/config/kdm/kdmrc.pacnew
[2011-08-26 16:14] installed libkexiv2 (4.7.0-2)
[2011-08-26 16:15] upgraded qscintilla (2.5.1-1 -> 2.5.1-2)
[2011-08-26 16:15] installed ocaml (3.12.1-1)
[2011-08-26 16:15] installed libkipi (4.7.0-2)
[2011-08-26 16:16] upgraded sane (1.0.22-1 -> 1.0.22-2)
[2011-08-26 16:16] installed libksane (4.7.0-2)
[2011-08-26 16:16] installed libkdcraw (4.7.0-2)
[2011-08-26 16:16] upgraded poppler-qt (0.16.4-1 -> 0.16.7-1)
[2011-08-26 16:16] upgraded libidn (1.21-1 -> 1.22-1)
[2011-08-26 16:16] upgraded qt3 (3.3.8-19 -> 3.3.8-20)
[2011-08-26 16:16] upgraded libktorrent (1.1.1-1 -> 1.1.2-1)
[2011-08-26 16:16] installed libmms (0.6.2-1)
[2011-08-26 16:16] upgraded libgadu (1.10.1-1 -> 1.11.0-1)
[2011-08-26 16:16] installed ortp (0.16.5-1)
[2011-08-26 16:16] installed mediastreamer (2.7.3-3)
[2011-08-26 16:17] upgraded qwt (5.2.1-1 -> 6.0.0-1)
[2011-08-26 16:17] upgraded neon (0.29.3-2 -> 0.29.6-2)
[2011-08-26 16:17] upgraded subversion (1.6.15-1 -> 1.6.17-6)
[2011-08-26 16:17] upgraded linux-firmware (20110227-1 -> 20110727-1)
[2011-08-26 16:17] upgraded mkinitcpio-busybox (1.18.2-1 -> 1.18.5-1)
[2011-08-26 16:17] upgraded mkinitcpio (0.6.11-1 -> 0.7.2-1)
[2011-08-26 16:18] >>> Updating module dependencies. Please wait ...
[2011-08-26 16:18] >>> Generating initial ramdisk, using mkinitcpio. Please wait...
[2011-08-26 16:18] ==> Building image from preset: 'default'
[2011-08-26 16:18] -> -k /boot/vmlinuz-linux -c /etc/mkinitcpio.conf -g /boot/initramfs-linux.img
[2011-08-26 16:18] ==> Starting build: 3.0-ARCH
[2011-08-26 16:18] -> Parsing hook: [base]
[2011-08-26 16:18] -> Parsing hook: [udev]
[2011-08-26 16:18] -> Parsing hook: [autodetect]
[2011-08-26 16:18] -> Parsing hook: [pata]
[2011-08-26 16:18] -> Parsing hook: [scsi]
[2011-08-26 16:18] -> Parsing hook: [sata]
[2011-08-26 16:18] -> Parsing hook: [filesystems]
[2011-08-26 16:18] -> Parsing hook: [usbinput]
[2011-08-26 16:18] ==> Generating module dependencies
[2011-08-26 16:18] ==> Creating gzip initcpio image: /boot/initramfs-linux.img
[2011-08-26 16:18] 7278 blocks
[2011-08-26 16:18] ==> Image generation successful
[2011-08-26 16:18] ==> Building image from preset: 'fallback'
[2011-08-26 16:18] -> -k /boot/vmlinuz-linux -c /etc/mkinitcpio.conf -g /boot/initramfs-linux-fallback.img -S autodetect
[2011-08-26 16:18] ==> Starting build: 3.0-ARCH
[2011-08-26 16:18] -> Parsing hook: [base]
[2011-08-26 16:18] -> Parsing hook: [udev]
[2011-08-26 16:18] -> Parsing hook: [pata]
[2011-08-26 16:18] -> Parsing hook: [scsi]
[2011-08-26 16:18] -> Parsing hook: [sata]
[2011-08-26 16:18] -> Parsing hook: [filesystems]
[2011-08-26 16:18] -> Parsing hook: [usbinput]
[2011-08-26 16:18] ==> Generating module dependencies
[2011-08-26 16:18] ==> Creating gzip initcpio image: /boot/initramfs-linux-fallback.img
[2011-08-26 16:18] 23389 blocks
[2011-08-26 16:18] ==> Image generation successful
[2011-08-26 16:18] installed linux (3.0.3-1)
[2011-08-26 16:18] installed linux-headers (3.0.3-1)
[2011-08-26 16:18] upgraded koffice-servicetypes (2.3.3-3 -> 2.3.3-5)
[2011-08-26 16:18] upgraded koffice-libs (2.3.3-3 -> 2.3.3-5)
[2011-08-26 16:18] upgraded koffice-templates (2.3.3-3 -> 2.3.3-5)
[2011-08-26 16:18] upgraded koffice-plugins (2.3.3-3 -> 2.3.3-5)
[2011-08-26 16:19] upgraded koffice-krita (2.3.3-3 -> 2.3.3-5)
[2011-08-26 16:19] upgraded ktorrent (4.1.1-1 -> 4.1.2-1)
[2011-08-26 16:19] upgraded kwebkitpart (1.1-1 -> 1.1.1-1)
[2011-08-26 16:19] upgraded less (443-1 -> 444-1)
[2011-08-26 16:19] upgraded usbmuxd (1.0.6-2 -> 1.0.7-2)
[2011-08-26 16:19] upgraded libimobiledevice (1.1.0-1 -> 1.1.1-2)
[2011-08-26 16:19] upgraded libgpod (0.8.0-2 -> 0.8.2-2)
[2011-08-26 16:19] upgraded libgsf (1.14.20-1 -> 1.14.21-1)
[2011-08-26 16:19] upgraded liblqr (0.4.1-1 -> 0.4.1-2)
[2011-08-26 16:19] installed libreoffice-en-US (3.4.2-2)
[2011-08-26 16:19] installed libtextcat (2.2-8)
[2011-08-26 16:19] * see https://wiki.archlinux.org/index.php/LibreOffice
[2011-08-26 16:19] -------------------------------------------------------------------
[2011-08-26 16:19] LibreOffice has been split into several packages:
[2011-08-26 16:19] - libreoffice-common
[2011-08-26 16:19] - libreoffice-{base,calc,draw,impress,math,writer} - frontend applications
[2011-08-26 16:19] - libreoffice-{gnome,kde4} - desktop integration plugins
[2011-08-26 16:19] - libreoffice-{sdk,sdk-doc} - add-on and doc for programming using
[2011-08-26 16:19] the LibreOffice APIs and for creating
[2011-08-26 16:19] extensions (UNO components).
[2011-08-26 16:19] -------------------------------------------------------------------
[2011-08-26 16:19] * you need to install at least one libreoffice-langpack
[2011-08-26 16:19] * you may want to pacman -Ss libreoffice-extensions
[2011-08-26 16:19] to see what additional extensions are prepared to install
[2011-08-26 16:19] * it's recommended to install {hunspell,mythes,hyphen}-xx pkg
[2011-08-26 16:19] for spell checking
[2011-08-26 16:19] * make sure you have installed some ttf font (ttf-dejavu recommended)
[2011-08-26 16:19] installed libreoffice-common (3.4.2-2)
[2011-08-26 16:19] installed libreoffice-base (3.4.2-2)
[2011-08-26 16:19] installed libreoffice-calc (3.4.2-2)
[2011-08-26 16:19] installed libreoffice-draw (3.4.2-2)
[2011-08-26 16:19] installed libreoffice-impress (3.4.2-2)
[2011-08-26 16:19] installed libreoffice-math (3.4.2-2)
[2011-08-26 16:19] upgraded libwpd (0.9.1-1 -> 0.9.2-1)
[2011-08-26 16:19] installed libwps (0.2.2-1)
[2011-08-26 16:19] installed libreoffice-writer (3.4.2-2)
[2011-08-26 16:19] upgraded libreoffice-extension-ct2n (3.3.2-2 -> 3.4.2-2)
[2011-08-26 16:20] The jdk package is licensed software.
[2011-08-26 16:20] You MUST read and agree to the license stored in
[2011-08-26 16:20] /usr/share/licenses/jdk/LICENSE before using it.
[2011-08-26 16:20] Please relogin to include jdk in your PATH
[2011-08-26 16:20] installed jdk (7-3)
[2011-08-26 16:20] upgraded libreoffice-extension-diagram (3.3.2-2 -> 3.4.2-2)
[2011-08-26 16:20] upgraded libreoffice-extension-hunart (3.3.2-2 -> 3.4.2-2)
[2011-08-26 16:20] upgraded libreoffice-extension-nlpsolver (3.3.2-2 -> 3.4.2-2)
[2011-08-26 16:20] upgraded libreoffice-extension-numbertext (3.3.2-2 -> 3.4.2-2)
[2011-08-26 16:20] upgraded libreoffice-extension-oooblogger (3.3.2-2 -> 3.4.2-2)
[2011-08-26 16:20] upgraded libreoffice-extension-pdfimport (3.3.2-2 -> 3.4.2-2)
[2011-08-26 16:20] upgraded libreoffice-extension-presentation-minimizer (3.3.2-2 -> 3.4.2-2)
[2011-08-26 16:20] upgraded libreoffice-extension-presenter-screen (3.3.2-2 -> 3.4.2-2)
[2011-08-26 16:20] upgraded libreoffice-extension-report-builder (3.3.2-2 -> 3.4.2-2)
[2011-08-26 16:20] upgraded libreoffice-extension-typo (3.3.2-2 -> 3.4.2-2)
[2011-08-26 16:20] upgraded libreoffice-extension-watch-window (3.3.2-2 -> 3.4.2-2)
[2011-08-26 16:20] upgraded libreoffice-extension-wiki-publisher (3.3.2-2 -> 3.4.2-2)
[2011-08-26 16:20] upgraded make (3.81-5 -> 3.82-3)
[2011-08-26 16:20] upgraded libreoffice-sdk (3.3.2-2 -> 3.4.2-2)
[2011-08-26 16:20] upgraded libsoup (2.34.1-1 -> 2.34.3-1)
[2011-08-26 16:20] upgraded libwebkit (1.4.0-1 -> 1.4.2-1)
[2011-08-26 16:20] upgraded links (2.3pre1-1 -> 2.3-1)
[2011-08-26 16:20] upgraded logrotate (3.7.9-1 -> 3.8.0-1)
[2011-08-26 16:20] upgraded luasocket (2.0.2-4 -> 2.0.2-5)
[2011-08-26 16:20] upgraded lzo2 (2.04-1 -> 2.05-1)
[2011-08-26 16:20] upgraded man-db (2.6.0.2-1 -> 2.6.0.2-2)
[2011-08-26 16:20] upgraded mdadm (3.2.1-3 -> 3.2.2-3)
[2011-08-26 16:20] upgraded mercurial (1.8.3-1 -> 1.9.1-1)
[2011-08-26 16:21] ERROR: Module nvidia is in use
[2011-08-26 16:21] In order to use the new nvidia module, exit Xserver and unload it manually.
[2011-08-26 16:21] upgraded nvidia-173xx (173.14.30-1 -> 173.14.31-2)
[2011-08-26 16:21] upgraded octave (3.4.0-2 -> 3.4.2-2)
[2011-08-26 16:21] upgraded openal (1.13-1 -> 1.13-2)
[2011-08-26 16:21] upgraded openbox (3.4.11.2-2 -> 3.5.0-3)
[2011-08-26 16:21] upgraded xine-lib (1.1.19-2 -> 1.1.19-3)
[2011-08-26 16:21] ==> Documentation and samples are in separate packages:
[2011-08-26 16:21]
[2011-08-26 16:21] * opencv-docs
[2011-08-26 16:21] * opencv-samples
[2011-08-26 16:21] upgraded opencv (2.2.0-5 -> 2.3.0-1)
[2011-08-26 16:21] upgraded oxygen-gtk (1.0.4-1 -> 1.1.2-1)
[2011-08-26 16:22] upgraded oxygen-icons-svg (4.6.2-1 -> 4.7.0-1)
[2011-08-26 16:22] upgraded p7zip (9.20.1-1 -> 9.20.1-4)
[2011-08-26 16:22] warning: /etc/pacman.d/mirrorlist installed as /etc/pacman.d/mirrorlist.pacnew
[2011-08-26 16:22] upgraded pacman-mirrorlist (20110324-1 -> 20110816-1)
[2011-08-26 16:22] upgraded pcmciautils (017-2 -> 018-1)
[2011-08-26 16:22] upgraded perl-text-iconv (1.7-5 -> 1.7-6)
[2011-08-26 16:22] upgraded perl-xml-parser (2.40-2 -> 2.41-1)
[2011-08-26 16:22] upgraded pkg-config (0.25-3 -> 0.26-1)
[2011-08-26 16:22] upgraded postgresql-libs (9.0.4-3 -> 9.0.4-4)
[2011-08-26 16:22] upgraded procps (3.2.8-3 -> 3.2.8-4)
[2011-08-26 16:22] upgraded python2-distribute (0.6.16-1 -> 0.6.19-1)
[2011-08-26 16:22] upgraded qtcurve-gtk2 (1.8.8-1 -> 1.8.9-1)
[2011-08-26 16:22] upgraded qtcurve-kde4 (1.8.7-1 -> 1.8.8-1)
[2011-08-26 16:24] upgraded qt-doc (4.7.2-1 -> 4.7.3-1)
[2011-08-26 16:24] >>> The kernel-mode plugin has a new place.
[2011-08-26 16:24] >>> It's now located under /usr/lib/rp-pppoe/rp-pppoe.so
[2011-08-26 16:24] >>> Change LINUX_PLUGIN to the new path in your /etc/ppp/pppoe.conf
[2011-08-26 16:24] upgraded rp-pppoe (3.10-6 -> 3.10-7)
[2011-08-26 16:24] upgraded rrdtool (1.4.5-1 -> 1.4.5-4)
[2011-08-26 16:24] updating gtk.immodules... done.
[2011-08-26 16:24] upgraded scim (1.4.9-2 -> 1.4.11-1)
[2011-08-26 16:24] upgraded screen (4.0.3-11 -> 4.0.3-12)
[2011-08-26 16:24] upgraded skype (2.2.0.25-1 -> 2.2.0.35-1)
[2011-08-26 16:24] upgraded soundtouch (1.5.0-1 -> 1.6.0-1)
[2011-08-26 16:24] upgraded sudo (1.8.1.p1-1 -> 1.8.2-1)
[2011-08-26 16:24] upgraded syslog-ng (3.2.2-2 -> 3.2.4-3)
[2011-08-26 16:25] upgraded tcl (8.5.9-1 -> 8.5.10-1)
[2011-08-26 16:26] Updating font cache... done.
[2011-08-26 16:26] Note: terminus-font is in /usr/share/fonts/local/
[2011-08-26 16:26] upgraded terminus-font (4.32-1 -> 4.36-1)
[2011-08-26 16:26] upgraded tk (8.5.9-1 -> 8.5.10-1)
[2011-08-26 16:27] Updating font cache... done.
[2011-08-26 16:27] upgraded ttf-liberation (1.06.0.20100721-1 -> 1.07.0-1)
[2011-08-26 16:27] upgraded tzdata (2011g-1 -> 2011h-1)
[2011-08-26 16:27] upgraded usbutils (002-2 -> 004-1)
[2011-08-26 16:27] upgraded vi (050325-4 -> 1:050325-1)
[2011-08-26 16:27] Updating vim help tags...done.
[2011-08-26 16:27] upgraded vim-supertab (1.5-1 -> 1.6-1)
[2011-08-26 16:27] Updating vim help tags...done.
[2011-08-26 16:27] upgraded vim-vcscommand (1.99.42-1 -> 1.99.43-1)
[2011-08-26 16:27] upgraded wget (1.12-5 -> 1.13.1-1)
[2011-08-26 16:27] upgraded wine (1.3.19-2 -> 1.3.26-1)
[2011-08-26 16:27] upgraded winetricks (20110429-1 -> 20110629-1)
[2011-08-26 16:27] upgraded xcursor-themes (1.0.2-1 -> 1.0.3-1)
[2011-08-26 16:27] upgraded xorg-iceauth (1.0.4-2 -> 1.0.5-1)
[2011-08-26 16:27] upgraded xorg-util-macros (1.13.0-1 -> 1.15.0-1)
[2011-08-26 16:27] upgraded xorg-server-devel (1.10.1-1 -> 1.10.3.901-1)
[2011-08-26 16:27] upgraded xorg-twm (1.0.6-2 -> 1.0.7-1)
[2011-08-26 16:27] upgraded xorg-x11perf (1.5.3-2 -> 1.5.4-1)
[2011-08-26 16:27] upgraded xorg-xlsclients (1.1.1-2 -> 1.1.2-1)
[2011-08-26 16:28] upgraded xorg-xrandr (1.3.4-2 -> 1.3.5-1)
[2011-08-26 16:28] upgraded xorg-xwininfo (1.1.1-2 -> 1.1.2-1)
[2011-08-26 16:28] upgraded xpdf (3.02_pl6-1 -> 3.03-1)
[2011-08-26 16:28] upgraded xscreensaver (5.12-2 -> 5.14-1)
[2011-08-26 16:28] upgraded xterm (269-1 -> 271-1)
[2011-08-26 16:28] upgraded xulrunner (2.0.1-1 -> 6.0-2)
[2011-08-26 16:28] upgraded zsnes (1.51-7 -> 1.51-9)
/etc/rc.conf without any comments:
LOCALE="en_US.UTF-8"
DAEMON_LOCALE="no"
HARDWARECLOCK="UTC"
TIMEZONE="Europe/Stockholm"
KEYMAP="se-lat6"
CONSOLEFONT=
CONSOLEMAP=
USECOLOR="yes"
MODULES=()
UDEV_TIMEOUT=30
USEDMRAID="no"
USEBTRFS="no"
USELVM="no"
HOSTNAME="archon"
interface=eth0
address=
netmask=
broadcast=
gateway=
NETWORK_PERSIST="no"
DAEMONS=(syslog-ng @network dbus preload !netfs @crond @cups @sshd @startntpd)
/etc/mkinitcpio.conf without any comments:
MODULES=""
BINARIES=""
FILES=""
HOOKS="base udev autodetect pata scsi sata filesystems"
Please let me know if you need to know anything else.
Last edited by Mogger (2012-03-30 23:33:38)I've temporarily fixed the problem by doing the following:
removed cryptsetup (1.3.1-2)
removed lvm2 (2.02.88-1)
removed mdadm (3.2.2-4)
removed linux (3.0.6-2)
upgraded mkinitcpio-busybox (1.18.5-1 -> 1.18.2-1)
installed gen-init-cpio (2.6.36-1)
upgraded udev (173-3 -> 167-2)
upgraded mkinitcpio (0.7.3-1 -> 0.6.11-1)
installed kernel26 (2.6.38.5-1)
upgraded nvidia-173xx-utils (173.14.31-1 -> 173.14.30-1)
upgraded nvidia-173xx (173.14.31-2 -> 173.14.30-1)
upgraded initscripts (2011.07.3-1 -> 2011.04.1-2)
upgraded net-tools (1.60.20110819cvs-1 -> 1.60-18)
I also restored my old /etc/mkinitcpio.conf, /etc/inittab and /etc/rc.conf.
I'm still interested in a solution to the original problem. Is it a problem with my configuration, the new kernel, the udev version or something else?
The difference in inittab is just a -s option and the mkinitcpio.conf files are the same except for some comments. rc.conf has the biggest changes and is now (removed comments):
LOCALE="en_US.UTF-8"
DAEMON_LOCALE="no"
HARDWARECLOCK="UTC"
TIMEZONE="Europe/Stockholm"
KEYMAP="se-lat6"
CONSOLEFONT=
CONSOLEMAP=
USECOLOR="yes"
VERBOSE="3"
MOD_AUTOLOAD="yes"
MODULES=(!usblp !pcspkr)
UDEV_TIMEOUT=30
USEDMRAID="no"
USEBTRFS="no"
USELVM="no"
HOSTNAME="archon"
eth0="dhcp"
INTERFACES=(eth0)
ROUTES=(!gateway)
NETWORK_PERSIST="no"
DAEMONS=(syslog-ng @network dbus preload !netfs !wicd @crond @cups @sshd @startntpd)
Last edited by Mogger (2011-10-11 14:04:20) -
Netfs causing slow boot, waiting for wifi?
Since adding netfs to the daemons in rc.conf my laptop takes about 30-40secs longer to startup. I realise netfs must be waiting for the network (WiFi) to connect but I have nfsd running as background (@) so I don't know how to fix this.
Actually I don't need the mounted NFS drive from boot so maybe I can run some script from rc.local to start nfs later and mount the drives?
My computer has a static IP setup in network client, could I fix the problem above by "hardwiring" the net config from rc.conf, making the WiFi connect faster?
Last edited by dabbi2000 (2011-11-27 14:10:56)nfsd is the nfs server - are you sure you need that running on your laptop?
You didn't say which network utility you're using, but afaik all of them have some do-this-after-connecting facility e.g. netcfg has PRE_UP/POST_UP/PRE_DOWN/POST_DOWN - I use that to make sure my nfs shares are mounted/unmounted after/before the network comes up/down. -
Cloned volume gets stuck at boot "Waiting for Network File System"
I've used "Carbon Copy Cloner" many times with success and no problems (v 2.3 , default settings, make destination bootable) as I migrated to larger drives or make backups in advance of a major OS upgrade.
Last time I was successful, I was at OS 10.3.5. I use 3rd drive to boot my Mac, then clone the one non-boot drive to the other. I do the disk repairs & permission repairs as the normal course of this process, before & after. I am now at 10.3.9. I am do this clone in prep to go to 10.4 so I have a good back in the event of later problems.
When I attempt to boot from the newly cloned partition, it goes fine on the boot process until it hangs at the "Waiting for Network File System" step and never gets past there. I've never had this happen before. I retired all the steps, even ran "Diskwarrier", but no change.
I am not trying to run from a remote or network drive, just a 2nd drive in my
G4 from which I have previously been able to boot (until this last clone attempt that is).
I googled the symptoms ""Waiting for Network File System"", found it to be common, but no real answers. Is this one of those annoying UNIX things? Any ideas how to fix / turn-off whatever is hanging the boot up? Thanks in advance!Hi Kool,
So there seems to be a "speed-bump" around 10.3.9. No wonder I have had the same results with a different tint. I went to Drive Genius to clone this one. Results with that were interesting.
If I did a [Device] clone, it would take and show at start with 'option' key... and work just like my internal with 3 accounts on it... login and proceed like it was internal. If I did a [Volume] clone, it would not show up at start with the 'option' key... I'd have to boot it from System Preferences > Start-up Drive. Once booted, it had no login screen so all the files were accessible. I took the clone of this 3 account PB and tried it on an iBook. Had to boot from System Preferences too, also, all the account were accessible from that machine... implying that anyone who had that drive could get past/into my files that would be secure on my computer, but not on the clone. If I took the [Device] clone and booted from the ibook at start with the option key, it would not get past the login screen... altho the mouse worked and I could click on the name, that was as far as it got, Froze.
So, I have figured, for safety, a [Device] clone is it, as long as the original computer lives. The safety features for login seem to be hardwired in the chip that the clone was made from (The iBook had 2 accounts but not my 3). If safety is not an issue, the [Volume] clone is fine... like moving to a newer OS on the same computer. It would seem from your experimentations that the situations with this 10.3.9 is just a hick-up and is solved in 10.4.3 with CCC v3...
Thanks for your info... I am thinking of going to Tiger, but I am so fond of this Panther...
Bo -
I have an SSD drive whose file system is corrupt and unreadable and it's OS of choice is Windows XP SP3 32-bit. I don't have a Windows XP disc.
Is it possible to repair the Master Boot Record (MBR) or Volume Boot Record (VBR) using a Windows Vista or 7 Recovery Disc? What about a Windows PE disc?
I researched around the Internet and found a command in Windows PE called bootsect (http://pcsupport.about.com/od/bios-booting/ht/bootsect-nt60.htm) that can repair both older and new Windows Volume Boot Code (NTLDR or BOOTMGR). The link states that the
bootsect command does NOT fix the MBR. Even the technet site here lists a reference to bootsect and that it can repair the MBR of both old and new versions of Windows (which doesn't appear to be correct). Can I use bootsect to restore the VBR of XP?
If bootsect cannot help me, then what is its purpose? Possible ex: Someone has a dual-boot XP and 7 system, the user uninstalls XP, and then uses bootsect to write BOOTMGR to the VBC.
I would appreciate any insight. Again, I don't have an XP disc. But I do have a WinPE disc and Win 7 Recovery disc and I was hoping I could fix my XP MBR and/or Windows VBR with one of the two.
Thank you.Checked these ?
http://www.microsoft.com/resources/documentation/windows/xp/all/proddocs/en-us/bootcons_fixmbr.mspx?mfr=true
http://pcsupport.about.com/od/fixtheproblem/ht/repairmbr.htm
Arnav Sharma | Facebook |
Twitter Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members
reading the thread. -
Unable to boot and failed to initialize to WinPE
Hi Guys, wanna ask, Im doing OSD and im having problem now to boot to Windows PE. When i boot, i can see the SCCM 2012 wallpaper background. Then a small window at the center saying that Initializing Windows PE. After a few seconds, it dissapears and it
restarts the machines and load back the existing OS. My site system server (DP server) is running on Server 2012 which is also the DHCP and WDS server. Im stuck a few weeks on this and dont know what is the issue. Whats the log to see for fail booting
to WinPE? Below are the settings i did:
DHCP
Set below options
066 Boot Server Host Name = SCCM DP ip address
067 Bootfile Name = boot\x86\wdsnbp.com
WDS
PXE Response – checked “Respond to all client computers (known and unknown)”
Boot – checked “Require the user to press the F12 key to continue the PXE boot” for both known and unknown clients
DHCP – Only check “Do not listen on DHCP ports”. The “Configure DHCP options to indicate that this is also a PXE server” is unchecked.
TFTP – Maximum Block size set to 0 and checked “Enable Variable Windows Extension”
Advanced – Under Domain Controller, checked “Allow WDS to dynamically discover valid
domain servers”
Boot Images
Installed x86 and x64 boot images to the DP’s
Included network drivers for each laptop model
Under Data Source tab, checked “Deploy this boot image from the PXE-enabled distribution point”
Site system server DP role
Under Distribution Point role properties, under PXE tab, selected below settings
Enable PXE support for clients
Allow this DP to respond to incoming PXE requests
Enable unknown computer support
Require a password when computer use PXESorry, Im looking at the wrong place for the log. Below is the snapshot on the smsts.log. I cant seem to upload the picture, but i will copy the whole text of the smsts.log. Before there is any error, i can see below string and im not sure whether it got
anything to do with the issue or not.
"X:\sms\data\WinPE does not exist" and "X:\_SmsTsWinPE does not exist"
The error that i can see from the log is:
1) Failed to download pxe variable file. Code(0x00000001)
2) PxeGetPxeData failed with 0x80004005
3) RegOpenKeyExW failed for Software\Microsoft\SMS\Task Sequence
4) GetTsRegValue() failed. 0x80070002
<![LOG[LOGGING: Finalize process ID set to 784]LOG]!><time="17:21:34.254+480" date="01-08-2014" component="TSBootShell" context="" type="1" thread="788" file="tslogging.cpp:1495">
<![LOG[==============================[ TSBootShell.exe ]==============================]LOG]!><time="17:21:34.254+480" date="01-08-2014" component="TSBootShell" context="" type="1" thread="788" file="bootshell.cpp:1052">
<![LOG[Succeeded loading resource DLL 'X:\sms\bin\i386\1033\TSRES.DLL']LOG]!><time="17:21:34.254+480" date="01-08-2014" component="TSBootShell" context="" type="1" thread="788" file="util.cpp:963">
<![LOG[Debug shell is enabled]LOG]!><time="17:21:34.254+480" date="01-08-2014" component="TSBootShell" context="" type="1" thread="788" file="bootshell.cpp:1063">
<![LOG[Waiting for PNP initialization...]LOG]!><time="17:21:34.254+480" date="01-08-2014" component="TSBootShell" context="" type="1" thread="800" file="bootshell.cpp:60">
<![LOG[RAM Disk Boot Path: NET(0)\BOOT\X86\IMAGES\BOOT.MY00008C.WIM]LOG]!><time="17:21:34.254+480" date="01-08-2014" component="TSBootShell" context="" type="1" thread="800" file="configpath.cpp:186">
<![LOG[Booted from network (PXE)]LOG]!><time="17:21:34.254+480" date="01-08-2014" component="TSBootShell" context="" type="1" thread="800" file="configpath.cpp:201">
<![LOG[Network(PXE) path: X:\sms\data\]LOG]!><time="17:21:34.254+480" date="01-08-2014" component="TSBootShell" context="" type="1" thread="800" file="configpath.cpp:203">
<![LOG[Found config path X:\sms\data\]LOG]!><time="17:21:34.254+480" date="01-08-2014" component="TSBootShell" context="" type="1" thread="800" file="bootshell.cpp:545">
<![LOG[Booting from removable media, not restoring bootloaders on hard drive]LOG]!><time="17:21:34.254+480" date="01-08-2014" component="TSBootShell" context="" type="1" thread="800" file="bootshell.cpp:579">
<![LOG[X:\sms\data\WinPE does not exist.]LOG]!><time="17:21:34.254+480" date="01-08-2014" component="TSBootShell" context="" type="1" thread="800" file="bootshell.cpp:596">
<![LOG[X:\_SmsTsWinPE\WinPE does not exist.]LOG]!><time="17:21:34.254+480" date="01-08-2014" component="TSBootShell" context="" type="1" thread="800" file="bootshell.cpp:610">
<![LOG[Executing command line: wpeinit.exe -winpe]LOG]!><time="17:21:36.381+480" date="01-08-2014" component="TSBootShell" context="" type="1" thread="800" file="bootshell.cpp:857">
<![LOG[Executing command line: X:\WINDOWS\system32\cmd.exe /k]LOG]!><time="17:21:37.208+480" date="01-08-2014" component="TSBootShell" context="" type="1" thread="788" file="bootshell.cpp:857">
<![LOG[The command completed successfully.]LOG]!><time="17:21:37.208+480" date="01-08-2014" component="TSBootShell" context="" type="1" thread="788" file="bootshell.cpp:939">
<![LOG[Successfully launched command shell.]LOG]!><time="17:21:37.208+480" date="01-08-2014" component="TSBootShell" context="" type="1" thread="788" file="bootshell.cpp:430">
<![LOG[The command completed successfully.]LOG]!><time="17:21:53.041+480" date="01-08-2014" component="TSBootShell" context="" type="1" thread="800" file="bootshell.cpp:939">
<![LOG[Starting DNS client service.]LOG]!><time="17:21:53.041+480" date="01-08-2014" component="TSBootShell" context="" type="1" thread="800" file="bootshell.cpp:663">
<![LOG[Executing command line: X:\sms\bin\i386\TsmBootstrap.exe /env:WinPE /configpath:X:\sms\data\]LOG]!><time="17:21:53.560+480" date="01-08-2014" component="TSBootShell" context="" type="1" thread="800" file="bootshell.cpp:857">
<![LOG[The command completed successfully.]LOG]!><time="17:21:53.560+480" date="01-08-2014" component="TSBootShell" context="" type="1" thread="800" file="bootshell.cpp:939">
<![LOG[==============================[ TSMBootStrap.exe ]==============================]LOG]!><time="17:21:53.638+480" date="01-08-2014" component="TSMBootstrap" context="" type="1" thread="1360" file="tsmbootstrap.cpp:1129">
<![LOG[Command line: X:\sms\bin\i386\TsmBootstrap.exe /env:WinPE /configpath:X:\sms\data\]LOG]!><time="17:21:53.638+480" date="01-08-2014" component="TSMBootstrap" context="" type="0" thread="1360" file="tsmbootstrap.cpp:1130">
<![LOG[Succeeded loading resource DLL 'X:\sms\bin\i386\1033\TSRES.DLL']LOG]!><time="17:21:53.638+480" date="01-08-2014" component="TSMBootstrap" context="" type="1" thread="1360" file="util.cpp:963">
<![LOG[Succeeded loading resource DLL 'X:\sms\bin\i386\TSRESNLC.DLL']LOG]!><time="17:21:53.638+480" date="01-08-2014" component="TSMBootstrap" context="" type="1" thread="1360" file="resourceutils.cpp:169">
<![LOG[Adding SMS bin folder "X:\sms\bin\i386" to the system environment PATH]LOG]!><time="17:21:53.638+480" date="01-08-2014" component="TSMBootstrap" context="" type="0" thread="1360" file="tsmbootstrap.cpp:963">
<![LOG[PXE Boot with Root = X:\]LOG]!><time="17:21:53.638+480" date="01-08-2014" component="TSMBootstrap" context="" type="1" thread="1360" file="tsmbootstrap.cpp:1062">
<![LOG[Executing from PXE in WinPE]LOG]!><time="17:21:53.638+480" date="01-08-2014" component="TSMBootstrap" context="" type="1" thread="1360" file="tsmbootstrap.cpp:1077">
<![LOG[Loading TsPxe.dll from X:\sms\bin\i386\TsPxe.dll]LOG]!><time="17:21:53.638+480" date="01-08-2014" component="TSMBootstrap" context="" type="0" thread="1360" file="tsmbootstraputil.cpp:1320">
<![LOG[TsPxe.dll loaded]LOG]!><time="17:21:53.638+480" date="01-08-2014" component="TSPxe" context="" type="0" thread="1360" file="tsmbootstraputil.cpp:1330">
<![LOG[Device has PXE booted]LOG]!><time="17:21:53.638+480" date="01-08-2014" component="TSPxe" context="" type="0" thread="1360" file="tspxe.cpp:122">
<![LOG[Succesfully added firewall rule for Tftp]LOG]!><time="17:21:53.653+480" date="01-08-2014" component="TSPxe" context="" type="0" thread="1360" file="fwopen.cpp:123">
<![LOG[Executing: X:\sms\bin\i386\smstftp.exe -i 10.133.130.114 get X:\sms\data\variables.dat]LOG]!><time="17:21:53.653+480" date="01-08-2014" component="TSPxe" context="" type="0" thread="1360" file="tspxe.cpp:177">
<![LOG[Command line for extension .exe is "%1" %*]LOG]!><time="17:21:53.700+480" date="01-08-2014" component="TSPxe" context="" type="0" thread="1360" file="commandline.cpp:228">
<![LOG[Set command line: "X:\sms\bin\i386\smstftp.exe" -i 10.133.130.114 get X:\sms\data\variables.dat]LOG]!><time="17:21:53.700+480" date="01-08-2014" component="TSPxe" context="" type="0" thread="1360" file="commandline.cpp:731">
<![LOG[Executing command line: "X:\sms\bin\i386\smstftp.exe" -i 10.133.130.114 get X:\sms\data\variables.dat]LOG]!><time="17:21:53.700+480" date="01-08-2014" component="TSPxe" context="" type="1" thread="1360" file="commandline.cpp:827">
<![LOG[Process completed with exit code 1]LOG]!><time="17:21:53.716+480" date="01-08-2014" component="TSPxe" context="" type="1" thread="1360" file="commandline.cpp:1123">
<![LOG[Succesfully removed firewall rule for Tftp]LOG]!><time="17:21:53.716+480" date="01-08-2014" component="TSPxe" context="" type="0" thread="1360" file="fwopen.cpp:146">
<![LOG[uExitCode == 0, HRESULT=80004005 (e:\nts_sccm_release\sms\server\pxe\tspxe\tspxe.cpp,185)]LOG]!><time="17:21:53.716+480" date="01-08-2014" component="TSPxe" context="" type="0" thread="1360" file="tspxe.cpp:185">
<![LOG[Failed to download pxe variable file. Code(0x00000001)]LOG]!><time="17:21:53.716+480" date="01-08-2014" component="TSPxe" context="" type="3" thread="1360" file="tspxe.cpp:185">
<![LOG[PxeGetPxeData failed with 0x80004005]LOG]!><time="17:21:53.716+480" date="01-08-2014" component="TSPxe" context="" type="3" thread="1360" file="tsmbootstraputil.cpp:1415">
<![LOG[HRESULT_FROM_WIN32(dwError), HRESULT=80004005 (e:\nts_sccm_release\sms\client\tasksequence\tsmbootstrap\tsmbootstraputil.cpp,1416)]LOG]!><time="17:21:53.716+480" date="01-08-2014" component="TSPxe" context="" type="0" thread="1360" file="tsmbootstraputil.cpp:1416">
<![LOG[TSMBootstrapUtil::PxeGetPxeData(&bPxeBooted, sVariablesFile, sPxePasswd), HRESULT=80004005 (e:\nts_sccm_release\sms\client\tasksequence\tsmbootstrap\tsmediawizardcontrol.cpp,2623)]LOG]!><time="17:21:53.716+480" date="01-08-2014" component="TSPxe"
context="" type="0" thread="1360" file="tsmediawizardcontrol.cpp:2623">
<![LOG[oTSMediaWizardControl.Run( sMediaRoot, true, sTSLaunchMode ), HRESULT=80004005 (e:\nts_sccm_release\sms\client\tasksequence\tsmbootstrap\tsmbootstrap.cpp,1078)]LOG]!><time="17:21:53.716+480" date="01-08-2014" component="TSPxe" context="" type="0"
thread="1360" file="tsmbootstrap.cpp:1078">
<![LOG[Execute( eExecutionEnv, sConfigPath, sTSXMLFile, uBootCount, &uExitCode ), HRESULT=80004005 (e:\nts_sccm_release\sms\client\tasksequence\tsmbootstrap\tsmbootstrap.cpp,1183)]LOG]!><time="17:21:53.716+480" date="01-08-2014" component="TSPxe"
context="" type="0" thread="1360" file="tsmbootstrap.cpp:1183">
<![LOG[Exiting with return code 0x80004005]LOG]!><time="17:21:53.716+480" date="01-08-2014" component="TSPxe" context="" type="1" thread="1360" file="tsmbootstrap.cpp:1195">
<![LOG[hMap != 0, HRESULT=80070002 (e:\qfe\nts\sms\framework\tscore\environmentscope.cpp,515)]LOG]!><time="17:21:53.716+480" date="01-08-2014" component="TSPxe" context="" type="0" thread="1360" file="environmentscope.cpp:515">
<![LOG[m_pGlobalScope->open(), HRESULT=80070002 (e:\qfe\nts\sms\framework\tscore\environmentlib.cpp,337)]LOG]!><time="17:21:53.716+480" date="01-08-2014" component="TSPxe" context="" type="0" thread="1360" file="environmentlib.cpp:337">
<![LOG[this->open(), HRESULT=80070002 (e:\qfe\nts\sms\framework\tscore\environmentlib.cpp,549)]LOG]!><time="17:21:53.716+480" date="01-08-2014" component="TSPxe" context="" type="0" thread="1360" file="environmentlib.cpp:549">
<![LOG[Execution complete.]LOG]!><time="17:21:53.731+480" date="01-08-2014" component="TSBootShell" context="" type="1" thread="800" file="bootshell.cpp:690">
<![LOG[hMap != 0, HRESULT=80070002 (e:\nts_sccm_release\sms\framework\tscore\environmentscope.cpp,515)]LOG]!><time="17:21:53.731+480" date="01-08-2014" component="TSBootShell" context="" type="0" thread="800" file="environmentscope.cpp:515">
<![LOG[m_pGlobalScope->open(), HRESULT=80070002 (e:\nts_sccm_release\sms\framework\tscore\environmentlib.cpp,337)]LOG]!><time="17:21:53.731+480" date="01-08-2014" component="TSBootShell" context="" type="0" thread="800" file="environmentlib.cpp:337">
<![LOG[this->open(), HRESULT=80070002 (e:\nts_sccm_release\sms\framework\tscore\environmentlib.cpp,549)]LOG]!><time="17:21:53.731+480" date="01-08-2014" component="TSBootShell" context="" type="0" thread="800" file="environmentlib.cpp:549">
<![LOG[::RegOpenKeyExW (HKEY_LOCAL_MACHINE, c_szSMSTSKey, 0, KEY_READ, &hSubKey), HRESULT=80070002 (e:\nts_sccm_release\sms\framework\tscore\utils.cpp,258)]LOG]!><time="17:21:53.731+480" date="01-08-2014" component="TSBootShell" context="" type="0"
thread="800" file="utils.cpp:258">
<![LOG[RegOpenKeyExW failed for Software\Microsoft\SMS\Task Sequence]LOG]!><time="17:21:53.731+480" date="01-08-2014" component="TSBootShell" context="" type="2" thread="800" file="utils.cpp:258">
<![LOG[GetTsRegValue() failed. 0x80070002.]LOG]!><time="17:21:53.731+480" date="01-08-2014" component="TSBootShell" context="" type="2" thread="800" file="utils.cpp:279">
<![LOG[End program: ]LOG]!><time="17:21:53.731+480" date="01-08-2014" component="TSBootShell" context="" type="1" thread="800" file="bootshell.cpp:722">
<![LOG[Finalizing logging from process 784]LOG]!><time="17:21:53.731+480" date="01-08-2014" component="TSBootShell" context="" type="1" thread="800" file="tslogging.cpp:1741">
<![LOG[Finalizing logs to root of first available drive]LOG]!><time="17:21:53.731+480" date="01-08-2014" component="TSBootShell" context="" type="1" thread="800" file="tslogging.cpp:1583">
<![LOG[Successfully finalized logs to D:\SMSTSLog]LOG]!><time="17:21:53.747+480" date="01-08-2014" component="TSBootShell" context="" type="1" thread="800" file="tslogging.cpp:1640">
<![LOG[Cleaning up task sequencing logging configuration.]LOG]!><time="17:21:53.747+480" date="01-08-2014" component="TSBootShell" context="" type="0" thread="800" file="tslogging.cpp:584"> -
Quicktime plugin does not load on FireFox 4.01 says Waiting for Video
When i go to Apple Trailers and view a trailer the popout box opens but message in window is " Waiting For Video ". Have re-installed quicktime still doesnt work, works ok in IE 8 still.
== This happened ==
Every time Firefox opened
== since installing Firefox 4.1You are using the <u>'''first beta release'''</u> of Firefox 4; it is not meant for general public use. Not all plugins may yet be updated. Only experienced testers should be using that new beta release. When using an early beta release of any application, you can expect problems. You can go to the Quicktime site and/or Quicktime forums to see if there is information there concerning the compatibility of your version of Quicktime with Firefox 4.
<u>'''''Other Issues'''''</u>: ~~red:You have installed plug-ins with known security issues. You should update them immediately.~~
<u>'''Install/Update Adobe Reader for Firefox (aka Adobe PDF Plug-In For Firefox)'''</u>: your ver. 9.3.2; current ver. 9.3.3 (important security update release 06-29-2010; see: http://www.adobe.com/support/security/bulletins/apsb10-15.html)
~~red:Check your version here~~: http://www.mozilla.com/en-US/plugincheck/
See: http://support.mozilla.com/en-US/kb/Using+the+Adobe+Reader+plugin+with+Firefox#Installing_and_updating_Adobe_Reader
''<u>You may be able to update from the Adobe Reader installed on your system</u>'' instead of going to the Adobe site and downloading. Start > Program Files, find and click Adobe Reader to open, click Help, click Check for Updates.
''<u>If you go to the Adobe site to download the current Adobe Reader:</u>''
-'''<u>use Firefox to download</u>''' and <u>'''SAVE to your hard drive'''</u> (save to Desktop for easy access)
~~red:-See the images at the bottom left of this post to see the steps to take on the Adobe site~~
-exit Firefox (File > Exit)
-check to see that Firefox is completely closed (''Ctrl+Alt+Del, choose Task Manager, click Processes tab, if "firefox.exe" is on the list, right-click "firefox.exe" and choose End process, close the Task Manager window'')
-double-click on the Adobe Reader installer you just downloaded to install/update Adobe Reader
*<u>'''NOTE: On Vista and Windows 7'''</u> you may need to run the plugin installer as Administrator by starting the installer via the right-click context menu if you do not get an UAC prompt to ask for permission to continue (i.e nothing seems to happen). See this: http://vistasupport.mvps.org/run_as_administrator.htm
*'''<u>NOTE for IE:</u>''' Firefox and most other browsers use a Plugin. IE uses an ActiveX version. To install/update the IE ActiveX version, same instructions as above, except use IE to download the ActiveX installer. See: [[ActiveX]]
*Also see: http://kb.mozillazine.org/Adobe_Reader ~~red:'''''AND'''''~~ [[How do I edit options to add Adobe to the list of allowed sites]] -
Because of the location where I live, most of google services are blocked on the internet. Yesterday I wanted to download a device driver from www.m-audio.com but the driver's page stopped loading. I noticed a message at the bottom left of the Firefox window saying "waiting for www.google.com" or something similar. Because of that wait, I could open the page only after 4 tries and waiting way too much time. Can I filter page contents from google so Firefox skips them?
You can look at Adblock Plus.
* Adblock Plus: https://addons.mozilla.org/firefox/addon/adblock-plus/
You need to subscribe to a Filter list (e.g. the EasyList).
* http://adblockplus.org/en/subscriptions
* http://adblockplus.org/en/getting_started -
Windows 7 very slow logon, Waiting for the User Profile Service, winlogon event 6006
Hello,
Every so often one of our Windows 7 clients which is not normally having any delay at logon will take a very long time to login. This may be 10 or 20 minutes or up to an hour in some cases.
Typically the event log will contain entries like
The winlogon notification subscriber <Profiles> took 572 second(s) to handle the notification event (Logon).
There is no further information available from Event Log Online Help, nor any additional detail as to why the logon event was so slow. During the delay the user will just see "Waiting for the User Profile Service" on their screen.
We first started seeing this problem with Windows Vista and if anything the situation has not improved since then. It has never happened with any of our Windows XP users.
We are currently planning a migration of computers to Windows 7 but stuff like this which has not been resolved in Windows over a 2 year period will stall that migration. The least improvement is to increase the event notification to give a lot more
information on why the user profile processing has stalled.Hi,
When did the issue begin to occur? Did it occur after installing certain application or applying certain policy?
To troubleshoot the issue, please perform the following step.
1. Restart the machine in Safe Mode with Networking to check whether the system can login quicker.
2. Type “gpedit.msc” in Search box and press Enter. Navigate to the following location:
Computer Configuration->Administrative Templates->System->Logon
Please double click “Always wait for the network at computer startup and logon” policy and disable it.
3. Perform a
Clean Boot to check the result.
Thanks,
Novak -
[SOLVED] dmraid "Timed out waiting for device" at boot
Created a bug report with solution proposal: https://bugs.archlinux.org/task/33166
I created a virtual machine to demonstrate the problem
https://docs.google.com/open?id=0B40Hp1 … WZUQ21xZk0
The root and the other mount points are all on one raid disk. Although the root mounts quickly, other mount points cause timeouts at boot time.
dmraid prints that all /dev/mapper/isw_* devices are created.
I think /dev/disk/by-uuid/* links are created too, but for some reason systemd doesn't see them.
After boot I can execute "mount -a" without errors.
here's my fstab:
tmpfs /tmp tmpfs nodev,nosuid 0 0
UUID=e89249d8-49a5-415b-8f9b-97de5cfbe82d / ext3 defaults
UUID=c37f8bdd-3d6c-495f-bf8a-5ef059e55254 swap swap defaults 0 0
UUID=91988343-dd89-43b9-8975-babb0b9510a2 /media/ARCHLINUXNEW ext4 nofail 0 1
UUID=62C813E9C813B9ED /media/distrpart ntfs-3g rw,nofail
UUID=E0A1-D623 /media/realboot vfat rw,codepage=866,iocharset=utf8,umask=002,noatime,nofail
# journalctl -b
Dec 15 00:25:24 localhost kernel: firewire_core 0000:05:03.0: created device fw0: GUID 0011d800017a5dd7, S400
Dec 15 00:26:50 localhost systemd[1]: Job dev-disk-by\x2duuid-E0A1\x2dD623.device/start timed out.
Dec 15 00:26:50 localhost systemd[1]: Timed out waiting for device dev-disk-by\x2duuid-E0A1\x2dD623.device.
Dec 15 00:26:50 localhost systemd[1]: Dependency failed for /media/realboot.
Dec 15 00:26:50 localhost systemd[1]: Job media-realboot.mount/start failed with result 'dependency'.
Dec 15 00:26:50 localhost systemd[1]: Job dev-disk-by\x2duuid-E0A1\x2dD623.device/start failed with result 'timeout'.
Dec 15 00:26:50 localhost systemd[1]: Job dev-disk-by\x2duuid-62C813E9C813B9ED.device/start timed out.
Dec 15 00:26:50 localhost systemd[1]: Timed out waiting for device dev-disk-by\x2duuid-62C813E9C813B9ED.device.
Dec 15 00:26:50 localhost systemd[1]: Dependency failed for /media/distrpart.
Dec 15 00:26:50 localhost systemd[1]: Job media-distrpart.mount/start failed with result 'dependency'.
Dec 15 00:26:50 localhost systemd[1]: Job dev-disk-by\x2duuid-62C813E9C813B9ED.device/start failed with result 'timeout'.
Dec 15 00:26:50 localhost systemd[1]: Job dev-disk-by\x2duuid-91988343\x2ddd89\x2d43b9\x2d8975\x2dbabb0b9510a2.device/start timed out.
Dec 15 00:26:50 localhost systemd[1]: Timed out waiting for device dev-disk-by\x2duuid-91988343\x2ddd89\x2d43b9\x2d8975\x2dbabb0b9510a2.device.
Dec 15 00:26:50 localhost systemd[1]: Dependency failed for /media/ARCHLINUXNEW.
Dec 15 00:26:50 localhost systemd[1]: Job media-ARCHLINUXNEW.mount/start failed with result 'dependency'.
Dec 15 00:26:50 localhost systemd[1]: Dependency failed for File System Check on /dev/disk/by-uuid/91988343-dd89-43b9-8975-babb0b9510a2.
Dec 15 00:26:50 localhost systemd[1]: Job systemd-fsck@dev-disk-by\x2duuid-91988343\x2ddd89\x2d43b9\x2d8975\x2dbabb0b9510a2.service/start failed with result 'dependency
Dec 15 00:26:50 localhost systemd[1]: Job dev-disk-by\x2duuid-91988343\x2ddd89\x2d43b9\x2d8975\x2dbabb0b9510a2.device/start failed with result 'timeout'.
Dec 15 00:26:50 localhost systemd[1]: Dependency failed for /dev/disk/by-uuid/c37f8bdd-3d6c-495f-bf8a-5ef059e55254.
Dec 15 00:26:50 localhost systemd[1]: Reached target Swap.
Note the 1.5 minute pause
# mount | grep /dev/mapper
/dev/mapper/isw_ebaifefjbf_Volume0p9 on / type ext3 (rw,relatime,stripe=64,data=ordered)
/dev/mapper/isw_ebaifefjbf_Volume0p1 on /media/realboot type vfat (rw,noatime,fmask=0002,dmask=0002,allow_utime=0020,codepage=cp866,iocharset=utf8,shortname=mixed,errors=remount-ro)
/dev/mapper/isw_ebaifefjbf_Volume0p8 on /media/ARCHLINUXNEW type ext4 (rw,relatime,stripe=64,data=ordered)
/dev/mapper/isw_ebaifefjbf_Volume0p5 on /media/distrpart type fuseblk (rw,nosuid,nodev,relatime,user_id=0,group_id=0,allow_other,blksize=4096)
Last edited by leniviy (2012-12-22 16:06:25)I've ran into exactly same problem lately, but finally solved it.
Setup: Intel Fake RAID, mirror, partitioned as:
/dev/mapper/isw_dfjeffgfaj_rootvol1 /boot
/dev/mapper/isw_dfjeffgfaj_rootvol2 /
/dev/mapper/isw_dfjeffgfaj_rootvol3 /home (dm-crypted)
In /etc/fstab i had following mountpoints:
# file /etc/fstab
/dev/mapper/isw_dfjeffgfaj_rootvolp2 / ext4 rw,relatime,data=ordered 0 1
/dev/mapper/isw_dfjeffgfaj_rootvolp1 /boot ext4 rw,relatime,data=ordered 0 2
and boot hung on waiting for /dev/mapper/isw_dfjeffgfaj_rootvolp1. Solution involves changing dev path to UUID:
# file /etc/fstab
/dev/mapper/isw_dfjeffgfaj_rootvolp2 / ext4 rw,relatime,data=ordered 0 1
UUID=44809529-11d9-4f53-9652-7b97ed077225 /boot ext4 rw,relatime,data=ordered 0 2
For some reason symlinks /dev/mapper/isw* are not present during systemd mount. -
JDev 11 hangs - Waiting for Designer to initialize ...
This was working yesterday. The only change is that I updated my system today. I did get new open-jdk libraries. This "shouldn't" be an issue since I put my JDK in .bash_profile as the first entry in the path.
java -version returns:
[klee@laptop ~]$ java -version
java version "1.6.0_12"
Java(TM) SE Runtime Environment (build 1.6.0_12-b04)
Java HotSpot(TM) Server VM (build 11.2-b01, mixed mode)
[klee@laptop ~]$
I am running (attempting to run) the Linux version of JDeveloper 11 (11.1.1.0.1). My laptop has 4 GB of memory.
When starting, Jdeveloper has the intial startup, once the screen goes to the IDE, I see the Waiting for Designer to Initialize. The load from java goes from roughly 161% down to 3%, then nothing changes.
Any suggestions besides reload JDeveloeper (I have already done that twice in the last month. That solution is getting old - reminds me of running Windows...
Thanks,
Ken
As a side note, how do you enclose code so it has the nice indentation? the pre tags only seem to work for the first few lines, then the font changes from monospace back to the default. I tried code tags, which just printed code and /code (with less than and greater than brackets) at the beginning and end - didn't do much...Hi Ken,
klee wrote:
As a side note, how do you enclose code so it has the nice indentation? the pre tags only seem to work for the first few lines, then the font changes from monospace back to the default. I tried code tags, which just printed code and /code (with less than and greater than brackets) at the beginning and end - didn't do much...You can enclose your codes in between two tags.
Regards,
Chan Kelwin -
Change Seconds Waiting for Device during boot
During boot at the section: "Waiting 10 Seconds for Device", I am often dropped to a shell. I think it may be because I need to increase the wait time. How can I do this? I've looked in several places but I'm not sure what to look for.
I've ran into exactly same problem lately, but finally solved it.
Setup: Intel Fake RAID, mirror, partitioned as:
/dev/mapper/isw_dfjeffgfaj_rootvol1 /boot
/dev/mapper/isw_dfjeffgfaj_rootvol2 /
/dev/mapper/isw_dfjeffgfaj_rootvol3 /home (dm-crypted)
In /etc/fstab i had following mountpoints:
# file /etc/fstab
/dev/mapper/isw_dfjeffgfaj_rootvolp2 / ext4 rw,relatime,data=ordered 0 1
/dev/mapper/isw_dfjeffgfaj_rootvolp1 /boot ext4 rw,relatime,data=ordered 0 2
and boot hung on waiting for /dev/mapper/isw_dfjeffgfaj_rootvolp1. Solution involves changing dev path to UUID:
# file /etc/fstab
/dev/mapper/isw_dfjeffgfaj_rootvolp2 / ext4 rw,relatime,data=ordered 0 1
UUID=44809529-11d9-4f53-9652-7b97ed077225 /boot ext4 rw,relatime,data=ordered 0 2
For some reason symlinks /dev/mapper/isw* are not present during systemd mount. -
hi, i am badly in need of help. i partitioned my mac hd yesterday and now the boot camp is nt working as i was using win 7 on it. i am using macbook pro 13'' 2011. plz help me. anxiously waiting for response... specially from "Christopher murphy"
you can't add or mofidy partition numbers. especially not if and once you have windows installed.
boot from Windows 7 DVD afterwards
but first you have to tell us and Christopher what and how you partitioned your system.
Successful setup of OS X Lion + Data Partition + Bootcamp Win7 Ult
https://discussions.apple.com/thread/3293948
So after many, many hours I think I've finally figured out how to successfully setup Mac OS X Lion on one partition, a seperate data partition, and Windows 7 Ultimate on a Bootcamp partition . Here is a screenshot of my setup on my 13" MacBook Pro
Thread with suggestions on Windows backup methods:
https://discussions.apple.com/thread/3798090
Paragon CampTune
Paragon CampTune is a commercial product that is designed expressly for this task. http://www.paragon-software.com/home/camptune/ It consists of a downloadable ISO that needs to be burned to a disc and booted from in order to resize the partitions costs US$19.95.
Securing Dual-System Configuration
Imaging is still the most affordable and robust way to secure computer data. Unfortunately Mac OS X backs up only HFS+ volumes, leaving Windows with dual-system configurations unsecured. You can permanently lose all of your data unless you have a Windows-compatible backup solution.
Paragon’s CampTune and Paragon’s Drive Copy for Mac can secure the entire dual-system configuration. CampTune creates traditional images of volumes or entire hard disks, Drive Copy can copy them to other disks. In case of an emergency, you can restore the previously created image or copy all your data back to its original state.
GParted Live
GParted Live is similar to CampTune as it is also distributed as a bootable image that needs to be copied to a CD/DVD or USB flash drive. As free and open source software, distributed under the GPL, it will always be available free. Since it has more functions than CampTune, it may be harder for folks who are not as experienced with partitioning hard drives. http://gparted.sourceforge.net/
iPartition
Coriolis Systems' iPartition is a £29.95 ($44.95 US) utility that runs in Mac OS X and allows resizing of all of the relevant partition formats, including HFS+, FAT32, and NTFS. It provides a Mac-oriented user interface that may be easier to manage than some of the free utilities. As it is not capable of resizing the boot disk, it requires a bootable external disk or a boot DVD. (A tool to create a boot DVD is included.)
Paragon Partition Manager
From the makes of CampTune is a commercial tool that is similar in functionality to GParted Live, but has a more polished/friendly user interface than GParted Live. Previously only the US$79.95 Professional version supported all the features required for this, but as of version 11 the US$39.95 Personal version has also been reported to work. http://www.paragon-software.com/home/pm-personal/
Winclone/Disk Utility
Winclone is a free tool for creating and restoring backup images of your Windows partition. One of its key features is that it can restore to a larger partition than the one the image was created from.
NOTE: Winclone has been discontinued, but for now remains available and capable of completing these tasks (including creating and restoring Windows 7 images).
Winclone updated to support Lion Winclone updates and download
Disk Utility can resize HFS+ (Mac OS) partitions, but is currently incapable of resizing NTFS partitions, so you could use it to reduce the size of the HFS+ partition and create a new larger placeholder MS-DOS (FAT) partition
The full process would be:
Backup Windows partition with Winclone.
(if the new Windows partition is smaller than the old one make sure you set the preferences in Winclone to save the image as an uncompressed dmg)
Delete old Windows partition
Resize current Mac Partition
Create new Windows partition as MS-DOS (FAT) in free space after Mac OS partition.
(If the new Windows partition is smaller than the old one an additional step is required: shrink the filesystem on the image by selecting Tools->Shrink Windows (NTFS) Filesystem)
Reboot your computer for the new Windows partition to mount properly (winclone may not restore if you don't reboot)
Restore Winclone partition over new Windows partition
An alternate Winclone based process is described in the External Guides section
Native OS utilities
MR user Kazyua reports that you can use the disk management utilities provided with the current operating systems if you want to do it manually. Windows 7 and OS X both have partition resizing functions built in. In OS X, open Disk Utility and manually shrink the mac HFS+ partition by dragging the lower right corner. Then in windows go to the start menu and type "disk management" into the search box then hit enter. You should get an overview of the drives you have and the individual partitions. Right-clicking on the partition gives an "Extend Volume" option. The Windows NTFS volume should then be extended into the free space you created with Disk Utility. This method has not worked for other users, so try at your own risk.
Resizing under VMWare Fusion
If you are looking to allocate more space to Windows under VMWare please refer to the following thread http://forums.macrumors.com/showthread.php?t=828182
From http://guides.macrumors.com/Extend/Resize_Boot_Camp_Partition
Thread with suggestions on Windows backup methods:
https://discussions.apple.com/thread/3798090
Maybe you are looking for
-
Helllo Expert, I want to display a long message, In module pool program . I have maintain the other message of the program in message class but the long message is not fitting into the message class. the message which I want to display is *"Data
-
In attempting to install recommended software updates I get a message that my startup disc is full. I have an iMac (intel-based) with 1GB memory. I suspect my iTunes library is using up much of the space (I have no movies installed and have already
-
Speedport time out fail wireless
I am connected to ethernet port, no problem. AirPort fails to connect. Now Windows with two local machines connect ok. My previous Dell connected. My AirPort works at home, a Bell Modem. SpeedPort W 700 V seems to have some issues for Win. The SpeedP
-
Error for baseline read of CAS record store
From time to time I get the following SOAPFaultException when trying to do a baseline read of a CAS recordstore. The component manager shows the recordstore is running. Partial updates are able to do delta reads. However baseline processes can not do
-
My iPhone 4s keeps randomly shutting down. It usually does this after it's been sitting in sleep mode for a few minutes. Pressing the home button or attempting a hard reset does not turn the phone back on. It seems to turn on on it's own. It has done