"Windows cannot be installed to this disk. The selected disk has an MBR partition table. On EFI systems, windows can only be installed to GPT disks." Error
Hey Im getting the following error when trying to install windows from a USB.
"Windows cannot be installed to this disk. The selected disk has an MBR partition table. On EFI systems, windows can only be installed to GPT disks."
I installed the windows 8 (64bit) iso using boot camp to a usb. I was able to do this after changing the info.plist to allow me to place the iso on the usb. After I make the partition and start the install, I get the above error. I formatted the partition in the installation but I keep getting this error. I've repreated the entire process but i keep getting this errror and the disk utility says my partition is a Windows NT File System (NTFS) so im not sure what's going on. If you can help me that would be greatly appreciated
I am having the same problem. Windows is trying to install. It identifies the various partitions but says that I cannot install Windows on the Boot Camp partition or any other. I select Drive options (advanced) and Format the Boot Camp drive, but it makes no difference.
This is the Windows error:
Windows cannot be installed to this disk. The selected disk has an MBR partition table. On EFI systems, Windows can only be installed to GPT disks.
Windows cannot be installed to this disk. This computer's hardware may not support booting to this disk. Ensure that the disk's controller is enabled in the computer BIOS menu.
I am not sure what Csound1 is suggesting with that post above. There are some involved suggestions over here <https://discussions.apple.com/message/23548999#23548999> about using Disk Utility to delete the Boot Camp partition and create new ones - is that the idea?
Similar Messages
-
Hi All,
I have been trying real hard to install Windows 8 on my Macbook Pro early 2011 model. I followed the instruction given by Bootcamp word to word, all things went very smoothly untill I was asked Windows Setup Instaled to selct the Hard drive. Here's the error:
"Windows cannot be installed to this disk 0. The selected disk has an MBR partition table. On EFI system, Windows can only be installed on GPT disks...."
Let me know guys what should I do?
Thanks,
AttiqeYou have started the Windows 8 installer in EFI mode, and you don't have to start in EFI mode on a Mac because your Mac emulates a BIOS and a MBR partition table in order to install Windows in non-EFI mode.
To start the Windows installer, hold the Option (Alt) key while your computer is starting and have a look at all the boot options you have. You should see two with a DVD above and they must be named "Windows" and "EFI Boot". Choose the option with "Windows" and follow the steps to install Windows. Note that you have to format the "BOOTCAMP" partition from the installer to be able to install Windows.
If you are trying to install Windows from a USB drive, note that your computer isn't compatible to do it -
Error: Windows Cannot Be Installed to This Disk. The Selected Disk Has an MBR Partition Table.
Error: Windows Cannot Be Installed to This Disk. The Selected Disk Has an MBR Partition Table.
Error: Windows Cannot Be Installed to This Disk. The Selected Disk Has an MBR Partition Table. On EFI Systems, Windows Can Only Be Installed to GPT.
I found one solution to this problem on hp forum but my laptop has boot legacy and does not disable the efi boot order.
HP Model# HP 1000-1140TU Notebook PC
Serial# 5cg2481dbg
Product# c8c94pa#uuf
This is solution which is found on hp forum
SolutionThe resolution to this issue depends on the the hard disk volume size:
Follow these steps if the hard disk volume size is less than 2.19 TB:
Temporarily disable the EFI Boot Sources setting in the BIOS:
Restart the computer, and then press F10 to enter the BIOS.
Navigate to Storage > Boot Order , and then disable the EFI Boot Sources .
Select File > Save Changes > Exit .
Install the Windows operating system.
Enable the EFI Boot Sources setting in the BIOS:
Restart the computer, and then press F10 to enter the BIOS.
Navigate to Storage > Boot Order , and then enable the EFI Boot Sources .
Select File > Save Changes > Exit .
Follow these steps if the hard disk volume size is greater than 2.19 TB:
Install the HP BIOS Update UEFI utility from the HP Web site:
Click here to access the document "HP BIOS Update UEFI" .
NOTE:The HP BIOS Update UEFI utility is installed by default on some HP computers.
Follow the steps in the Microsoft document titled "How to Configure UEFI/GPT-Based Hard Drive Partitions" (in English) to create a GPT partition.
Click here to access the document "How to Configure UEFI/GPT-Based Hard Drive Partitions" .
NOTEne or more of the links above will take you outside the Hewlett-Packard Web site. HP does not control and is not responsible for information outside the HP Web site.I am having the same problem. Windows is trying to install. It identifies the various partitions but says that I cannot install Windows on the Boot Camp partition or any other. I select Drive options (advanced) and Format the Boot Camp drive, but it makes no difference.
This is the Windows error:
Windows cannot be installed to this disk. The selected disk has an MBR partition table. On EFI systems, Windows can only be installed to GPT disks.
Windows cannot be installed to this disk. This computer's hardware may not support booting to this disk. Ensure that the disk's controller is enabled in the computer BIOS menu.
I am not sure what Csound1 is suggesting with that post above. There are some involved suggestions over here <https://discussions.apple.com/message/23548999#23548999> about using Disk Utility to delete the Boot Camp partition and create new ones - is that the idea? -
I have an Early 2011 13" MBP going strong with an SSD and original HDD installed in the optical drive. However, having had success with windows 7 on my old HDD I was planning to install Windows 8.1 (from .iso) on my SSD. However, for the past day or so it's been a nightmare.
I tried the official procedure but by editing the bootcamp info.plist so I could boot from USB (you can't install windows from an external optical drive apparently) partitioning as bootcamp wanted too.
I then tried it a number of different ways using disk utility etc and with an empty space
However, I always seem to end up with the error "“Windows cannot be installed on this disk. The selected disk has an MBR partition table. On EFI systems, Windows can only installed on GPT disks“
I read some interesting stuff here http://www.royhochstenbach.com/installing-windows-8-1-on-a-2013-mac-pro/
He points out that
"Windows 7 and 8 in x64 support EFI. Normally if you install Windows on a Mac and use the installation DVD, it boots into regular BIOS mode, thus can be installed on an MBR partition. I tried the same, but since the Mac Pro doesn’t have an optical drive I had to use an external drive. And apparently the Mac boots external optical drives in EFI mode too. The Bootcamp wizard is aware of this, and creates a GPT partition on a non-superdrive Mac but an MBR partition on a superdrive Mac."
This means Bootcamp is essentially making the wrong type of partition?
My real question is? How do I install it windows 8? I'm really on my last legs!
I really don't want to have to open this thing up and reinsert my optical drive as its really really difficult to get out of the enclosure (would probably have to break it).
A huge thanks in advance!Hi,
Have you tried that suggestion?
You also could use this commands to check and install again:
Inside windows installer, hit Shift+F10 to get a command prompt, then run diskpart and type List disk to displays a list of disks and information about them, such as their size, amount of available free space, whether the disk is a basic or dynamic disk,
and whether the disk uses the master boot record (MBR) or GUID partition table (GPT) partition style.
and then select the target disk. Zap the drive (with the clean command), create GPT table (new gpt), create the GPT-EFI special partitions.
Step-by-step instructions is here for reference:
HOW TO: Use the Diskpart.efi Utility to Create a GUID Partition Table Partition on a Raw Disk in Windows
http://support.microsoft.com/kb/297800?wa=wsignin1.0
Then reboot so the firmware finds those partitions and adds the disk to the EFI-native boot order (Windows installer checks this).
Karen Hu
TechNet Community Support -
I have windows 8.1 on DVD & on USB CF Reader/Card. I've followed the full steps in bootcamp, but when it restarts and its time to select the bootcamp partition to install windows (after alt rebooting to the efi startup) I get the "Windows can't be installed on this storage device. The chosen harddisk contains a MBR-partition-table. Windows can only be installed on GPT-harddisks on EFI-systems" error.
I've scoured the internet trying different solutions that seem to work for everyone else, but to no avail. I've reformatted from that screen, doesn't help. I've removed bootcamp partition and manually partitioned using disk util, leaving it empty once partition-wise, and filling it with a blank partition the second time. I've done a full back up and clean re-install of Yosemite, and nothing seems to be working.
Thats when I switched to DVD install, as I heard sometimes you can't install with a CF card. When I alt-boot, I can see EFI-windows and windows, but if I select EFI-windows, same problem as before, and if I select windows, I get the black screen of "no bootable device please insert boot disk and press any key."
I've been stuck w/o bootcamp for over 2 years now. Anyone, please help?
Mid 2010 iMac running 256gb SSD, Yosemite 10.10.1 trying to install windows 8.1I am having the same problem. Windows is trying to install. It identifies the various partitions but says that I cannot install Windows on the Boot Camp partition or any other. I select Drive options (advanced) and Format the Boot Camp drive, but it makes no difference.
This is the Windows error:
Windows cannot be installed to this disk. The selected disk has an MBR partition table. On EFI systems, Windows can only be installed to GPT disks.
Windows cannot be installed to this disk. This computer's hardware may not support booting to this disk. Ensure that the disk's controller is enabled in the computer BIOS menu.
I am not sure what Csound1 is suggesting with that post above. There are some involved suggestions over here <https://discussions.apple.com/message/23548999#23548999> about using Disk Utility to delete the Boot Camp partition and create new ones - is that the idea? -
Trying to download ITunes latest version on my Windows XP and I get this message: "The installer has insufficient privileges to access this directory: C:\Program Files\ITunes. The installation cannot continue. Log on as administrator or contact your system administrator." HELP?
Hello PamelaFox14,
Thank you for using Apple Support Communities.
It sounds like you need to log in as the administrator to update the iTunes application properly.
Take a look at this article named:
Trouble installing iTunes or QuickTime for Windows
http://support.apple.com/kb/HT1926
This section in particular:
1. Make sure you have administrator account access
To install iTunes or QuickTime software, you need to be logged in as an administrator on the computer. If you're not sure if you have administrator account access, you may find this Microsoft article helpful:
Windows 7: How do I log on as an administrator?
Otherwise, refer to the Help documentation from Microsoft, contact your IT department, or visitsupport.microsoft.com for more information.
All the best,
Sterling -
updated today and cannot open my mails it says: The last time you opened Mail, it unexpectedly quit while reopening windows. Do you want to try to reopen its windows again?
Do a backup.
Quit the application.
Go to Finder and select your user/home folder. With that Finder window as the front window, either select Finder/View/Show View options or go command - J. When the View options opens, check ’Show Library Folder’. That should make your user library folder visible in your user/home folder. Select Library. Then go to Preferences/com.apple.mail.plist. Move the .plist to your desktop.
Restart, open the application and test. If it works okay, delete the plist from the desktop.
If the application is the same, return the .plist to where you got it from, overwriting the newer one.
Thanks to leonie for some information contained in this. -
I have this message appearing "the application finder has unexpectedly quit while trying to restore its windows"...
So far it doesn't appear to be effecting anything that i can see on my imac BUT it is incredibly annoying and popping up at bad times, and it all happened when my imac automatically updated itself. So annoying. PLEASE help!!!Finder crashes are often caused by "Google Drive." If it's installed, I suggest you first check for an update. If that doesn't solve the problem, remove it according to the developer's instructions. You may need to start the computer in safe mode to do so. Back up all data before making any changes.
If you use Google Drive and don't want to remove it, then try deselecting the option in its preferences to "show status icons." According to reports, that may be enough to stop the crashing.
Similar cloud-data clients such as "Dolly Drive," "iDrive," "Open Drive," "Transporter Desktop," and others can cause the same problem. -
I cannot open iTunes. This is the message I get: "The file iTunes library .itl cannot be read because it was created by a newer version of iTunes. Would you like to download iTunes now?" I did a download and it is up to date, but still won't open. HELP
See Empty/corrupt iTunes library after upgrade/crash.
tt2 -
I am trying to upgrad the hard drive in my mac book pro using the disk utility in an attempt to clone my old hard drive. I can only get so far throughj the process where its about to start cloing when I get a message " error 254". Any idea what that means and how do I get around this issue so I can use my new hard drive? Thanks for your input.
VinceConnect the HDD to your MBP. Open Disk Utility>Erase and drag the HDD icon inrt the Name field. The format should be Mac OS Extended (Journaled). Click on the Erase button.
Then try the clone process again. You may use Disk Utility>Restore or a third party cloning application such as Carbon Copy Cloner or Super Duper.
Ciao. -
When I try to use the internal hard drive as a scratch disk I get this error "unable to set scratch disk- the selected directory is on write protect or non-writable media. Any ideas on how to fix this. It only happens in fcp.
By internal, I assume you're referring to your systems (boot) drive. Is it, by chance, a partitioned dive?
Also…although many people successfully use their systems drives as scratch disks, over time you'll have better results using a dedicated drive for your media.
Good luck.
Russ -
i already did the Hidding part and later moved the events and projects to the FCP events and projects folder . I still cannot share - keep getting this message "THE SHARE OPERATION 1080P FOR APPLE DEVICES (10 MBPS) HAS FAILED. Quicktime Error -50
I dont know what else to do to be able to share my project - I know i updated FCPX before i shared this project but i dont know what im doing wrongmasterpieces wrote:
later moved the events and projects to the FCP events and projects folder .
Can you explain in detail what you did?
Do any other shsre destinations complete? If not, do you get the same error message? -
Hello, my MacBook Pro is still running the OS X 10.5.8, can I install the Mavericks directly? Or could you advise which latest system is able to be installed for my notebook?
First up, we don't know what kind of MacBook you have so we can't tell you what OS you can run. You can use this instruction to identify which MacBook model you have: http://support.apple.com/kb/ht1635. Alternatively, from the Apple menu open "About this Mac". From the window that pops up, click "More Info". This will open the system profiler. Click "Hardware" and locate the model identifier, there.
Next, you need to determine if your system can even run Mavericks before you can go about installing it. These are the requirements:
To install Mavericks, you need one of these Macs:
iMac (Mid-2007 or later)
MacBook (13-inch Aluminum, Late 2008), (13-inch, Early 2009 or later)
MacBook Pro (13-inch, Mid-2009 or later),
MacBook Pro (15-inch or 17-inch, Mid/Late 2007 or later)
MacBook Air (Late 2008 or later)
Mac mini (Early 2009 or later)
Mac Pro (Early 2008 or later)
Xserve (Early 2009)
Your Mac also needs:
OS X Mountain Lion, Lion, or Snow Leopard v10.6.8 already installed
2 GB or more of memory
8 GB or more of available space
Lastly, as you'll note from the above, you can't update to Mavericks (or Mountain Lion or Lion) from 10.5.8. Mavericks is only available in the App Store. You need to be running Snow Leopard (10.6.8) in order to download and install any OS from Lion (10.7) and up. You can buy Snow Leopard here: http://store.apple.com/us/product/MC573/mac-os-x-106-snow-leopard -
I currently have iPhoto 8.1.2 on my macbook pro and am trying to update to the latest version. I have had to work backward, but I can only get back to 9.1, which will not install because it says I need at least 9.0 to install it. Is 9.0 available? Will I need to go back even further? Thanks
Upgrading from iPhoto 8 to iPhoto 9 requires a purchase. There are two ways to get to iPhoto 9:
1 - purchase a copy of the iLife 11 disk from a 3rd party retailer like Amazon.com or eBay.com.
2 - if your MBP meets the requirements upgrade you system for free to Mavericks. Then you can purchase the latest iPhoto version, 9.5.1, from the App Store.
OT -
I have a Windows copy of Photoshop Elements 11, but the serial number has been lost. I didn't buy the product and I am unable to find the box. As far as I know, it's never been used so has not been registered. Does anyone know how the serial number can be recovered under these circumstances?
If you never bought the product then you cannot get the serial number.
Maybe you are looking for
-
I noticed this problem when a friend of mine directed me to a site with an embedded movie object: http://psubuntu.com/installation-instructions/ There are a few issues here: 1. If I look at this site in IE7, it shows up with a red "x" icon for the re
-
Hype is more crucial than ever
Traditionalists give recount you sport was more decorous in the old days. But between bareknuckle rivals bill challenges on the walls of 19th Century taverns and the push discussion punch-ups of the mouth day, hype has never been out of forge. What i
-
FB60 Service Tax entry Missing
Dear All, While entry of Vendor Bill thru Tcode FB60, forgot entry of service Tax. Also Payment made by Cheque for Vendor Bill. Now how to enter Service TAx entry for that Bill. It is not possible to reverse Payment entry. So it is not possible to re
-
Native Installer works with Net Use, but AIR File does not.
I'm building an AIR application that runs a "net use" command in windows 7. Strangely, the installer type appears to impact run permissions: + Export release build to "Native Installer" -> "Net Use" works and I see all my test alert boxes. + Ex
-
Cisco 6506 Netflow configuration
I configured netflow to capture data received by vlan 950. vlan 950 has an ip 10.198.0.12. But the output is capturing only packets with source ip of this subnet only. why is it not showing any traffic received from outside? or sent to outside hosts