HT4740 i already did the Hidding part and later moved the events and projects to the FCP events and projects folder . I still cannot share - keep getting this message "THE SHARE OPERATION 1080P FOR APPLE DEVICES (10 MBPS) HAS FAILED. Quicktime Error -50
i already did the Hidding part and later moved the events and projects to the FCP events and projects folder . I still cannot share - keep getting this message "THE SHARE OPERATION 1080P FOR APPLE DEVICES (10 MBPS) HAS FAILED. Quicktime Error -50
I dont know what else to do to be able to share my project - I know i updated FCPX before i shared this project but i dont know what im doing wrong
masterpieces wrote:
later moved the events and projects to the FCP events and projects folder .
Can you explain in detail what you did?
Do any other shsre destinations complete? If not, do you get the same error message?
Similar Messages
-
Compressor 1080p for Apple Devices (10 Mbps) Does Not Include Dolby 5.1 Audio Track
Compressor recognised my file's audio properties as: AAC 5.1 (C L R Ls Rs LFE), 48.000 kHz
I use the 1080p for Apple Devices (10 Mbps) which should include Dobly 5.1 audio track
After the succesfful completion of any file the output file only includes a 2 channel audio track.WIsh I could help and was hoping someone else would jump in with suggestions. The surround sound work I've done successfully is limited to the legacy versions of FCP and Compressor. When I've tested it in the FCPX to Compreessor workflow, I've not got it to work either.
I suggest you post your question in FCP X or Logic Pro forum to see whether you get some help.
Good luck.
Russ -
I keep getting this message " the maximum number of free accounts have been activated on this iPad " what does that mean and how can I fix it
It's a really bad idea to post your iPhone's serial number and I've asked the Hosts to remove it.
Any one device can create only three iCloud accounts. As you have apparently already created three accounts (or if it's a used phone the previous owner did) you cannot create any more one it. This is tied to the hardware, not the account, and there is no way round it.
You can create a new iCloud account on another iOS device or on a Mac, and then you will be able to sign into that on your iPhone. -
I keep getting this message: The backup disk image “/Volumes/Time Capsule/Coyner’s iMac.sparsebundle” is already in use. What should I do?
SeoulTom (Coyner)Make sure that no other Macs are backing up at the time
Pull the power cord from the back of the Time Capsule
Count to ten
Plug the power cord back into the Time Capsule
Wait a few minutes, then try a backup again
Check to make sure that you are running firmware 7.6.4 on the Time Capsule -
My computer had to be wiped clean and I had to reinstall my Photoshop Elements 5. I keep getting this message: The Adobe Updater could not be started. Please reinstall the application and components.
I need to take care of this. I have reinstalled it 3 times and still get the same message.
Any suggestions?Firefox is trying to update but it can't because Firefox is running
Open the task manager with Ctrl + Alt + delete. Click on the Processes tab and find firefox.exe. Click End process -
I'm trying to export a slideshow and I keep getting this message: The movie contains an invalid data reference. What should I do?
That usually means that iPhoto can't find a clip or a shot that you're using in the Slideshow.
Regards
TD -
I keep getting this message:
The photos have been placed in the folder /users/debbiecampbell/pictures/iphtot librry recovered photos_11. 68 photos found in iphoto library that were not imported. Everytime I open iPhoto I get this message. I have deleted the recovered folders numerous times. A new one is made each time I open iPhoto.Go to your Pictures Folder and find the iPhoto Library there. Right (or Control-) Click on the icon and select 'Show Package Contents'. A finder window will open with the Library exposed.
Look there for a Folder called 'Import' or 'Importing'.
Drag it to the Desktop. *Make no other changes*.
Start iPhoto. Does that help?
If it does then look inside that folder on your desktop. Does it contain anything you want? If not you can trash the folder.
Regards
TD -
I am not able to convert movies, keep getting this message The document “The Walking Dead Trailer - YouTube-2.mp4” could not be opened. The movie's file format isn't recognized. not sure why, anybody know
Sounds like someone ripped the movie off of YouTube and it got corrupted in the process. Try getting the movie file again, or try using an alternative movie player such as VLC: http://www.videolan.org
-
Why am I getting this message when I try to open my ITunes: "The Itunes app could not be opened. An unknown error occurred (-50)."?
http://support.apple.com/kb/TS3694#error14
These errors are typically resolved by performing one or more of the steps listed below:
Perform USB isolation troubleshooting, including trying a different USB port directly on the computer. See the advanced steps below for USB troubleshooting.
Put a USB 2.0 hub between the device and the computer.
Try a different USB 30-pin dock-connector cable.
Eliminate third-party security software conflicts.
There may be third-party software installed that modifies your default packet size in Windows by inserting one or more TcpWindowSize entries into your registry. Your default packet size being set incorrectly can cause this error. Contact the manufacturer of the software that installed the packet-size modification for assistance. Or, follow this article by Microsoft: How to reset Internet Protocol (TCP/IP) to reset the packet size back to the default for Windows.
Connect your computer directly to your Internet source, bypassing any routers, hubs, or switches. You may need to restart your computer and modem to get online.
Try to restore from another known-good computer and network. -
I have tried to download photoshop elements x 5 times and keep getting message "the file archive part of photoshop is missing...."
You can download the trial version of the software thru the page linked below and then use your current serial number to activate it.
Be sure to follow the steps outlined in the Note: Very Important Instructions section on the download pages at this site and have cookies enabled in your browser or else the download will not work properly.
Photoshop/Premiere Elements 11: http://prodesigntools.com/photoshop-elements-11-direct-download-links-pse-premiere-pre.htm l -
In trying to forward some photos, I keep getting the message:
The email server didn't recognize your user name
and password.First go to iPhoto's Accounts preference pane and delete the email account that's there. Close iPhoto, reopen and add your email account to the Accounts preference pane and try again.
Next, and IMO the better solution, set Mail are the email client for iPhoto in iPhoto's General preference pane:
This gives you better access to your contacts, a sent copy and, if you need a layout like iPhoto gives you, similar layouts in iPhoto's stationary option.
OT -
I've tried for 2 days to sync my phone with iTunes but it won't let me saying that the phone cannot be synced because an unknown error occured (1150). I've tried resetting my sync history and resetting my firewalls to allow iTunes but nothing I've tried seems to work. Suggestions????
In the course of your troubleshooting to date, have you worked through the following document?
iTunes: Error 13019 during sync -
I keep getting this message: the user name or password for iCloud is incorrect
I changed my password at the request of apple and now I get the above message.
andreafromdowningtown wrote:
...at the request of apple...
Can you explain?
andreafromdowningtown wrote:
...and now I get the above message.
Are you entering the new password? -
I've repeatedly "tried again" over the past month with no luck. I'd rather not delete everything if that's what "repairing" the back disk involves.
On a time capsule the error message is meaningless. That would only apply to an external drive...TC is a network drive.
I recommend you just reboot the whole network.. from off..
Restart in order.. modem.. TC.. clients. Wait 2 min between each one.
If the disk still won't mount give us more info..
Are you using wireless or ethernet?
How is the TC configured?
What sort of internet? -
I have iPhoto v 9.1.4. Update available is 9.4.3. I keep getting this message: "You have updates available for other accounts. To update this application, sign into the account you used to purchase it". I have done this and I keep getting the same message over and over again. Please help me!
Please try each of the following steps you haven't already taken, until the issue is resolved. After each step, relaunch the App Store and try again.
1. Follow the instructions in this Apple Support article.
2. If any App Store purchases were made under a different Apple ID, or if the bundled iLife applications were accepted under a different ID, sign in to the App Store with that ID to update.
3. Alternatively, delete the probem applications and re-download them with the ID you're using now. If you haven't already purchased them with that ID, you'll have to do that first, because purchases can't be transferred from one account to another.
4. Select the Purchased tab in the App Store window. If you see an item in the list marked "You have 3 apps to accept," click Accept.
5. Triple-click anywhere in the line below on this page to select it:
/Library/Caches/com.apple.appstore/adoption.plist
Right-click or control-click the highlighted line and select
Services ▹ Reveal
from the contextual menu. A Finder window may open with a file selected. If it does, delete the selected file. You may be prompted for your login password.
Then repeat step 4.
6. Select
Store ▹ View My Account
from the App Store menu bar, then select View hidden purchases. If you're trying to update any hidden purchases, unhide them.
7. Launch iTunes and select
Store ▹ Authorize This Computer
from the menu bar.
8. If you've moved any App Store apps out of the Applications folder, or into a subfolder, put them back. Never move or copy those applications. If you have backup copies of the apps on another volume, unmount it and try to update again.
9. Contact Account and Billing Support.
Maybe you are looking for
-
I receive many e-mails with zipped files. I can no longer open or unzip my files. A window welcoming me to Application Loader drops down. It prompts for an iTunes Connect login, but will no accept my iTunes login. I have no way to open or unzip my
-
Solman 7.1; delete old database from SMSY
We have done upgrade to solman 7.1 . So we use SMSY with datasource LMDB now. In former times the database host of some SAP-systems were changed. So we have some old obsolete entries like database <SID>_0001 in SMSY (sent by SLD BEFORE the solman up
-
One Sold-To and different Payers
Hello all In my Sls Order I will have a Sold To. This SP (sold to party) at Master Data will have his personal VAT Registration Number (General Data/Control Data Tab). I just sell services (no delivery/no stock). I make a invoice for each position I
-
I have a radio button that asks the user if their current address is valid for the previous 5 years. If the user selects no, then I show the fields for their previous address. ----- F.P1.CurrentAddressQuestion::change - (JavaScript, client) ----- if
-
I am using JTable in SWING which have multiple columns. If I go an adding the data in each column by tabbing out from one column to another. After entering the data in the last column if I dont tab out and try to retrieve the value in the last column